1// SPDX-License-Identifier: BSD-3-Clause 2/* 3 * Copyright (c) 2022, Linaro Limited 4 */ 5 6#include <dt-bindings/iio/qcom,spmi-adc7-pm8350.h> 7#include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h> 8#include <dt-bindings/iio/qcom,spmi-adc7-pmr735a.h> 9#include <dt-bindings/input/input.h> 10#include <dt-bindings/interrupt-controller/irq.h> 11#include <dt-bindings/spmi/spmi.h> 12 13/ { 14 thermal-zones { 15 pm8280_1_thermal: pm8280-1-thermal { 16 polling-delay-passive = <100>; 17 polling-delay = <0>; 18 thermal-sensors = <&pm8280_1_temp_alarm>; 19 20 trips { 21 trip0 { 22 temperature = <95000>; 23 hysteresis = <0>; 24 type = "passive"; 25 }; 26 27 trip1 { 28 temperature = <115000>; 29 hysteresis = <0>; 30 type = "critical"; 31 }; 32 }; 33 }; 34 35 pm8280_2_thermal: pm8280-2-thermal { 36 polling-delay-passive = <100>; 37 polling-delay = <0>; 38 thermal-sensors = <&pm8280_2_temp_alarm>; 39 40 trips { 41 trip0 { 42 temperature = <95000>; 43 hysteresis = <0>; 44 type = "passive"; 45 }; 46 47 trip1 { 48 temperature = <115000>; 49 hysteresis = <0>; 50 type = "critical"; 51 }; 52 }; 53 }; 54 }; 55}; 56 57&spmi_bus { 58 pmk8280: pmic@0 { 59 compatible = "qcom,pmk8350", "qcom,spmi-pmic"; 60 reg = <0x0 SPMI_USID>; 61 #address-cells = <1>; 62 #size-cells = <0>; 63 64 pmk8280_pon: pon@1300 { 65 compatible = "qcom,pmk8350-pon"; 66 reg = <0x1300>, <0x800>; 67 reg-names = "hlos", "pbs"; 68 69 pmk8280_pon_pwrkey: pwrkey { 70 compatible = "qcom,pmk8350-pwrkey"; 71 interrupts-extended = <&spmi_bus 0x0 0x13 0x7 IRQ_TYPE_EDGE_BOTH>; 72 linux,code = <KEY_POWER>; 73 status = "disabled"; 74 }; 75 76 pmk8280_pon_resin: resin { 77 compatible = "qcom,pmk8350-resin"; 78 interrupts-extended = <&spmi_bus 0x0 0x13 0x6 IRQ_TYPE_EDGE_BOTH>; 79 status = "disabled"; 80 }; 81 }; 82 83 pmk8280_vadc: adc@3100 { 84 compatible = "qcom,spmi-adc7"; 85 reg = <0x3100>; 86 interrupts-extended = <&spmi_bus 0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>; 87 #address-cells = <1>; 88 #size-cells = <0>; 89 #io-channel-cells = <1>; 90 91 channel@3 { 92 reg = <PMK8350_ADC7_DIE_TEMP>; 93 qcom,pre-scaling = <1 1>; 94 label = "pmk8350_die_temp"; 95 }; 96 97 channel@44 { 98 reg = <PMK8350_ADC7_AMUX_THM1_100K_PU>; 99 qcom,hw-settle-time = <200>; 100 qcom,ratiometric; 101 label = "pmk8350_xo_therm"; 102 }; 103 104 channel@103 { 105 reg = <PM8350_ADC7_DIE_TEMP(1)>; 106 qcom,pre-scaling = <1 1>; 107 label = "pmc8280_1_die_temp"; 108 }; 109 110 channel@303 { 111 reg = <PM8350_ADC7_DIE_TEMP(3)>; 112 qcom,pre-scaling = <1 1>; 113 label = "pmc8280_2_die_temp"; 114 }; 115 116 channel@403 { 117 reg = <PMR735A_ADC7_DIE_TEMP>; 118 qcom,pre-scaling = <1 1>; 119 label = "pmr735a_die_temp"; 120 }; 121 }; 122 123 pmk8280_adc_tm: adc-tm@3400 { 124 compatible = "qcom,spmi-adc-tm5-gen2"; 125 reg = <0x3400>; 126 interrupts-extended = <&spmi_bus 0x0 0x34 0x0 IRQ_TYPE_EDGE_RISING>; 127 #address-cells = <1>; 128 #size-cells = <0>; 129 #thermal-sensor-cells = <1>; 130 status = "disabled"; 131 }; 132 133 pmk8280_rtc: rtc@6100 { 134 compatible = "qcom,pmk8350-rtc"; 135 reg = <0x6100>, <0x6200>; 136 reg-names = "rtc", "alarm"; 137 interrupts-extended = <&spmi_bus 0x0 0x62 0x1 IRQ_TYPE_EDGE_RISING>; 138 wakeup-source; 139 status = "disabled"; 140 }; 141 142 pmk8280_sdam_6: nvram@8500 { 143 compatible = "qcom,spmi-sdam"; 144 reg = <0x8500>; 145 #address-cells = <1>; 146 #size-cells = <1>; 147 ranges = <0 0x8500 0x100>; 148 status = "disabled"; 149 }; 150 }; 151 152 pmc8280_1: pmic@1 { 153 compatible = "qcom,pm8350", "qcom,spmi-pmic"; 154 reg = <0x1 SPMI_USID>; 155 #address-cells = <1>; 156 #size-cells = <0>; 157 158 pm8280_1_temp_alarm: temp-alarm@a00 { 159 compatible = "qcom,spmi-temp-alarm"; 160 reg = <0xa00>; 161 interrupts-extended = <&spmi_bus 0x1 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; 162 io-channels = <&pmk8280_vadc PM8350_ADC7_DIE_TEMP(1)>; 163 io-channel-names = "thermal"; 164 #thermal-sensor-cells = <0>; 165 }; 166 167 pmc8280_1_gpios: gpio@8800 { 168 compatible = "qcom,pm8350-gpio", "qcom,spmi-gpio"; 169 reg = <0x8800>; 170 gpio-controller; 171 gpio-ranges = <&pmc8280_1_gpios 0 0 10>; 172 #gpio-cells = <2>; 173 interrupt-controller; 174 #interrupt-cells = <2>; 175 }; 176 }; 177 178 pmc8280c: pmic@2 { 179 compatible = "qcom,pm8350c", "qcom,spmi-pmic"; 180 reg = <0x2 SPMI_USID>; 181 #address-cells = <1>; 182 #size-cells = <0>; 183 184 pmc8280c_gpios: gpio@8800 { 185 compatible = "qcom,pm8350c-gpio", "qcom,spmi-gpio"; 186 reg = <0x8800>; 187 gpio-controller; 188 gpio-ranges = <&pmc8280c_gpios 0 0 9>; 189 #gpio-cells = <2>; 190 interrupt-controller; 191 #interrupt-cells = <2>; 192 }; 193 194 pmc8280c_lpg: pwm { 195 compatible = "qcom,pm8350c-pwm"; 196 197 #address-cells = <1>; 198 #size-cells = <0>; 199 200 #pwm-cells = <2>; 201 202 status = "disabled"; 203 }; 204 }; 205 206 pmc8280_2: pmic@3 { 207 compatible = "qcom,pm8350", "qcom,spmi-pmic"; 208 reg = <0x3 SPMI_USID>; 209 #address-cells = <1>; 210 #size-cells = <0>; 211 212 pm8280_2_temp_alarm: temp-alarm@a00 { 213 compatible = "qcom,spmi-temp-alarm"; 214 reg = <0xa00>; 215 interrupts-extended = <&spmi_bus 0x2 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; 216 io-channels = <&pmk8280_vadc PM8350_ADC7_DIE_TEMP(3)>; 217 io-channel-names = "thermal"; 218 #thermal-sensor-cells = <0>; 219 }; 220 221 pmc8280_2_gpios: gpio@8800 { 222 compatible = "qcom,pm8350-gpio", "qcom,spmi-gpio"; 223 reg = <0x8800>; 224 gpio-controller; 225 gpio-ranges = <&pmc8280_2_gpios 0 0 10>; 226 #gpio-cells = <2>; 227 interrupt-controller; 228 #interrupt-cells = <2>; 229 }; 230 }; 231 232 pmr735a: pmic@4 { 233 compatible = "qcom,pmr735a", "qcom,spmi-pmic"; 234 reg = <0x4 SPMI_USID>; 235 #address-cells = <1>; 236 #size-cells = <0>; 237 238 pmr735a_gpios: gpio@8800 { 239 compatible = "qcom,pmr735a-gpio", "qcom,spmi-gpio"; 240 reg = <0x8800>; 241 gpio-controller; 242 gpio-ranges = <&pmr735a_gpios 0 0 4>; 243 #gpio-cells = <2>; 244 interrupt-controller; 245 #interrupt-cells = <2>; 246 }; 247 }; 248}; 249