1// SPDX-License-Identifier: BSD-3-Clause 2/* 3 * Copyright (c) 2021, The Linux Foundation. All rights reserved. 4 * Copyright (c) 2022, Linaro Limited 5 */ 6 7/dts-v1/; 8 9#include <dt-bindings/gpio/gpio.h> 10#include <dt-bindings/regulator/qcom,rpmh-regulator.h> 11 12#include "sc8280xp.dtsi" 13#include "sc8280xp-pmics.dtsi" 14 15/ { 16 model = "Qualcomm SC8280XP CRD"; 17 compatible = "qcom,sc8280xp-crd", "qcom,sc8280xp"; 18 19 aliases { 20 i2c4 = &i2c4; 21 i2c21 = &i2c21; 22 serial0 = &uart17; 23 }; 24 25 backlight: backlight { 26 compatible = "pwm-backlight"; 27 pwms = <&pmc8280c_lpg 3 1000000>; 28 enable-gpios = <&pmc8280_1_gpios 8 GPIO_ACTIVE_HIGH>; 29 power-supply = <&vreg_edp_bl>; 30 31 pinctrl-names = "default"; 32 pinctrl-0 = <&edp_bl_en>, <&edp_bl_pwm>; 33 }; 34 35 chosen { 36 stdout-path = "serial0:115200n8"; 37 }; 38 39 pmic-glink { 40 compatible = "qcom,sc8280xp-pmic-glink", "qcom,pmic-glink"; 41 42 #address-cells = <1>; 43 #size-cells = <0>; 44 45 connector@0 { 46 compatible = "usb-c-connector"; 47 reg = <0>; 48 power-role = "dual"; 49 data-role = "dual"; 50 51 ports { 52 #address-cells = <1>; 53 #size-cells = <0>; 54 55 port@0 { 56 reg = <0>; 57 58 pmic_glink_con0_hs: endpoint { 59 remote-endpoint = <&usb_0_dwc3_hs>; 60 }; 61 }; 62 63 port@1 { 64 reg = <1>; 65 66 pmic_glink_con0_ss: endpoint { 67 remote-endpoint = <&usb_0_qmpphy_out>; 68 }; 69 }; 70 71 port@2 { 72 reg = <2>; 73 74 pmic_glink_con0_sbu: endpoint { 75 remote-endpoint = <&usb0_sbu_mux>; 76 }; 77 }; 78 }; 79 }; 80 81 connector@1 { 82 compatible = "usb-c-connector"; 83 reg = <1>; 84 power-role = "dual"; 85 data-role = "dual"; 86 87 ports { 88 #address-cells = <1>; 89 #size-cells = <0>; 90 port@0 { 91 reg = <0>; 92 93 pmic_glink_con1_hs: endpoint { 94 remote-endpoint = <&usb_1_dwc3_hs>; 95 }; 96 }; 97 98 port@1 { 99 reg = <1>; 100 101 pmic_glink_con1_ss: endpoint { 102 remote-endpoint = <&usb_1_qmpphy_out>; 103 }; 104 }; 105 106 port@2 { 107 reg = <2>; 108 109 pmic_glink_con1_sbu: endpoint { 110 remote-endpoint = <&usb1_sbu_mux>; 111 }; 112 }; 113 }; 114 }; 115 }; 116 117 vreg_edp_3p3: regulator-edp-3p3 { 118 compatible = "regulator-fixed"; 119 120 regulator-name = "VREG_EDP_3P3"; 121 regulator-min-microvolt = <3300000>; 122 regulator-max-microvolt = <3300000>; 123 124 gpio = <&tlmm 25 GPIO_ACTIVE_HIGH>; 125 enable-active-high; 126 127 pinctrl-names = "default"; 128 pinctrl-0 = <&edp_reg_en>; 129 130 regulator-boot-on; 131 }; 132 133 vreg_edp_bl: regulator-edp-bl { 134 compatible = "regulator-fixed"; 135 136 regulator-name = "VREG_EDP_BL"; 137 regulator-min-microvolt = <3600000>; 138 regulator-max-microvolt = <3600000>; 139 140 gpio = <&pmc8280_1_gpios 9 GPIO_ACTIVE_HIGH>; 141 enable-active-high; 142 143 pinctrl-names = "default"; 144 pinctrl-0 = <&edp_bl_reg_en>; 145 146 regulator-boot-on; 147 }; 148 149 vreg_nvme: regulator-nvme { 150 compatible = "regulator-fixed"; 151 152 regulator-name = "VREG_NVME_3P3"; 153 regulator-min-microvolt = <3300000>; 154 regulator-max-microvolt = <3300000>; 155 156 gpio = <&tlmm 135 GPIO_ACTIVE_HIGH>; 157 enable-active-high; 158 159 pinctrl-names = "default"; 160 pinctrl-0 = <&nvme_reg_en>; 161 }; 162 163 vreg_misc_3p3: regulator-misc-3p3 { 164 compatible = "regulator-fixed"; 165 166 regulator-name = "VREG_MISC_3P3"; 167 regulator-min-microvolt = <3300000>; 168 regulator-max-microvolt = <3300000>; 169 170 gpio = <&pmc8280_1_gpios 2 GPIO_ACTIVE_HIGH>; 171 enable-active-high; 172 173 pinctrl-names = "default"; 174 pinctrl-0 = <&misc_3p3_reg_en>; 175 176 regulator-boot-on; 177 regulator-always-on; 178 }; 179 180 vreg_wlan: regulator-wlan { 181 compatible = "regulator-fixed"; 182 183 regulator-name = "VPH_PWR_WLAN"; 184 regulator-min-microvolt = <3900000>; 185 regulator-max-microvolt = <3900000>; 186 187 gpio = <&pmr735a_gpios 1 GPIO_ACTIVE_HIGH>; 188 enable-active-high; 189 190 pinctrl-names = "default"; 191 pinctrl-0 = <&hastings_reg_en>; 192 193 regulator-boot-on; 194 }; 195 196 vreg_wwan: regulator-wwan { 197 compatible = "regulator-fixed"; 198 199 regulator-name = "SDX_VPH_PWR"; 200 regulator-min-microvolt = <3300000>; 201 regulator-max-microvolt = <3300000>; 202 203 gpio = <&pmc8280_2_gpios 1 GPIO_ACTIVE_HIGH>; 204 enable-active-high; 205 206 pinctrl-names = "default"; 207 pinctrl-0 = <&wwan_sw_en>; 208 209 regulator-boot-on; 210 }; 211 212 reserved-memory { 213 gpu_mem: gpu-mem@8bf00000 { 214 reg = <0 0x8bf00000 0 0x2000>; 215 no-map; 216 }; 217 218 linux,cma { 219 compatible = "shared-dma-pool"; 220 size = <0x0 0x8000000>; 221 reusable; 222 linux,cma-default; 223 }; 224 }; 225 226 usb0-sbu-mux { 227 compatible = "pericom,pi3usb102", "gpio-sbu-mux"; 228 229 enable-gpios = <&tlmm 101 GPIO_ACTIVE_LOW>; 230 select-gpios = <&tlmm 164 GPIO_ACTIVE_HIGH>; 231 232 pinctrl-names = "default"; 233 pinctrl-0 = <&usb0_sbu_default>; 234 235 mode-switch; 236 orientation-switch; 237 238 port { 239 usb0_sbu_mux: endpoint { 240 remote-endpoint = <&pmic_glink_con0_sbu>; 241 }; 242 }; 243 }; 244 245 usb1-sbu-mux { 246 compatible = "pericom,pi3usb102", "gpio-sbu-mux"; 247 248 enable-gpios = <&tlmm 48 GPIO_ACTIVE_LOW>; 249 select-gpios = <&tlmm 47 GPIO_ACTIVE_HIGH>; 250 251 pinctrl-names = "default"; 252 pinctrl-0 = <&usb1_sbu_default>; 253 254 mode-switch; 255 orientation-switch; 256 257 port { 258 usb1_sbu_mux: endpoint { 259 remote-endpoint = <&pmic_glink_con1_sbu>; 260 }; 261 }; 262 }; 263}; 264 265&apps_rsc { 266 regulators-0 { 267 compatible = "qcom,pm8350-rpmh-regulators"; 268 qcom,pmic-id = "b"; 269 270 vdd-l3-l5-supply = <&vreg_s11b>; 271 272 vreg_s11b: smps11 { 273 regulator-name = "vreg_s11b"; 274 regulator-min-microvolt = <1272000>; 275 regulator-max-microvolt = <1272000>; 276 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 277 }; 278 279 vreg_l3b: ldo3 { 280 regulator-name = "vreg_l3b"; 281 regulator-min-microvolt = <1200000>; 282 regulator-max-microvolt = <1200000>; 283 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 284 regulator-boot-on; 285 }; 286 287 vreg_l4b: ldo4 { 288 regulator-name = "vreg_l4b"; 289 regulator-min-microvolt = <912000>; 290 regulator-max-microvolt = <912000>; 291 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 292 }; 293 294 vreg_l6b: ldo6 { 295 regulator-name = "vreg_l6b"; 296 regulator-min-microvolt = <880000>; 297 regulator-max-microvolt = <880000>; 298 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 299 regulator-boot-on; 300 }; 301 }; 302 303 regulators-1 { 304 compatible = "qcom,pm8350c-rpmh-regulators"; 305 qcom,pmic-id = "c"; 306 307 vreg_l1c: ldo1 { 308 regulator-name = "vreg_l1c"; 309 regulator-min-microvolt = <1800000>; 310 regulator-max-microvolt = <1800000>; 311 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 312 }; 313 314 vreg_l6c: ldo6 { 315 regulator-name = "vreg_l6c"; 316 regulator-min-microvolt = <1800000>; 317 regulator-max-microvolt = <2960000>; 318 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 319 }; 320 321 vreg_l7c: ldo7 { 322 regulator-name = "vreg_l7c"; 323 regulator-min-microvolt = <2504000>; 324 regulator-max-microvolt = <2504000>; 325 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 326 regulator-allow-set-load; 327 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 328 RPMH_REGULATOR_MODE_HPM>; 329 }; 330 331 vreg_l9c: ldo9 { 332 regulator-name = "vreg_l9c"; 333 regulator-min-microvolt = <2960000>; 334 regulator-max-microvolt = <2960000>; 335 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 336 }; 337 338 vreg_l13c: ldo13 { 339 regulator-name = "vreg_l13c"; 340 regulator-min-microvolt = <3072000>; 341 regulator-max-microvolt = <3072000>; 342 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 343 }; 344 }; 345 346 regulators-2 { 347 compatible = "qcom,pm8350-rpmh-regulators"; 348 qcom,pmic-id = "d"; 349 350 vdd-l1-l4-supply = <&vreg_s11b>; 351 352 vreg_l3d: ldo3 { 353 regulator-name = "vreg_l3d"; 354 regulator-min-microvolt = <1200000>; 355 regulator-max-microvolt = <1200000>; 356 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 357 regulator-allow-set-load; 358 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 359 RPMH_REGULATOR_MODE_HPM>; 360 }; 361 362 vreg_l4d: ldo4 { 363 regulator-name = "vreg_l4d"; 364 regulator-min-microvolt = <1200000>; 365 regulator-max-microvolt = <1200000>; 366 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 367 }; 368 369 vreg_l6d: ldo6 { 370 regulator-name = "vreg_l6d"; 371 regulator-min-microvolt = <880000>; 372 regulator-max-microvolt = <880000>; 373 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 374 }; 375 376 vreg_l7d: ldo7 { 377 regulator-name = "vreg_l7d"; 378 regulator-min-microvolt = <3072000>; 379 regulator-max-microvolt = <3072000>; 380 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 381 }; 382 383 vreg_l9d: ldo9 { 384 regulator-name = "vreg_l9d"; 385 regulator-min-microvolt = <912000>; 386 regulator-max-microvolt = <912000>; 387 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 388 }; 389 }; 390}; 391 392&dispcc0 { 393 status = "okay"; 394}; 395 396&gpu { 397 status = "okay"; 398 399 zap-shader { 400 memory-region = <&gpu_mem>; 401 firmware-name = "qcom/sc8280xp/qcdxkmsuc8280.mbn"; 402 }; 403}; 404 405&mdss0 { 406 status = "okay"; 407}; 408 409&mdss0_dp0 { 410 status = "okay"; 411}; 412 413&mdss0_dp0_out { 414 data-lanes = <0 1>; 415 remote-endpoint = <&usb_0_qmpphy_dp_in>; 416}; 417 418&mdss0_dp1 { 419 status = "okay"; 420}; 421 422&mdss0_dp1_out { 423 data-lanes = <0 1>; 424 remote-endpoint = <&usb_1_qmpphy_dp_in>; 425}; 426 427&mdss0_dp3 { 428 compatible = "qcom,sc8280xp-edp"; 429 /delete-property/ #sound-dai-cells; 430 431 data-lanes = <0 1 2 3>; 432 433 status = "okay"; 434 435 aux-bus { 436 panel { 437 compatible = "edp-panel"; 438 power-supply = <&vreg_edp_3p3>; 439 440 backlight = <&backlight>; 441 442 port { 443 edp_panel_in: endpoint { 444 remote-endpoint = <&mdss0_dp3_out>; 445 }; 446 }; 447 }; 448 }; 449 450 ports { 451 port@1 { 452 reg = <1>; 453 mdss0_dp3_out: endpoint { 454 remote-endpoint = <&edp_panel_in>; 455 }; 456 }; 457 }; 458}; 459 460&mdss0_dp3_phy { 461 compatible = "qcom,sc8280xp-edp-phy"; 462 463 vdda-phy-supply = <&vreg_l6b>; 464 vdda-pll-supply = <&vreg_l3b>; 465 466 status = "okay"; 467}; 468 469&i2c4 { 470 clock-frequency = <400000>; 471 472 pinctrl-names = "default"; 473 pinctrl-0 = <&i2c4_default>; 474 475 status = "okay"; 476 477 touchscreen@10 { 478 compatible = "hid-over-i2c"; 479 reg = <0x10>; 480 481 hid-descr-addr = <0x1>; 482 interrupts-extended = <&tlmm 175 IRQ_TYPE_LEVEL_LOW>; 483 vdd-supply = <&vreg_misc_3p3>; 484 485 pinctrl-names = "default"; 486 pinctrl-0 = <&ts0_default>; 487 }; 488}; 489 490&i2c21 { 491 clock-frequency = <400000>; 492 493 pinctrl-names = "default"; 494 pinctrl-0 = <&i2c21_default>; 495 496 status = "okay"; 497 498 touchpad@15 { 499 compatible = "hid-over-i2c"; 500 reg = <0x15>; 501 502 hid-descr-addr = <0x1>; 503 interrupts-extended = <&tlmm 182 IRQ_TYPE_LEVEL_LOW>; 504 vdd-supply = <&vreg_misc_3p3>; 505 506 pinctrl-names = "default"; 507 pinctrl-0 = <&tpad_default>; 508 509 wakeup-source; 510 }; 511 512 keyboard@68 { 513 compatible = "hid-over-i2c"; 514 reg = <0x68>; 515 516 hid-descr-addr = <0x1>; 517 interrupts-extended = <&tlmm 104 IRQ_TYPE_LEVEL_LOW>; 518 vdd-supply = <&vreg_misc_3p3>; 519 520 pinctrl-names = "default"; 521 pinctrl-0 = <&kybd_default>; 522 523 wakeup-source; 524 }; 525}; 526 527&pcie2a { 528 perst-gpios = <&tlmm 143 GPIO_ACTIVE_LOW>; 529 wake-gpios = <&tlmm 145 GPIO_ACTIVE_LOW>; 530 531 vddpe-3v3-supply = <&vreg_nvme>; 532 533 pinctrl-names = "default"; 534 pinctrl-0 = <&pcie2a_default>; 535 536 status = "okay"; 537}; 538 539&pcie2a_phy { 540 vdda-phy-supply = <&vreg_l6d>; 541 vdda-pll-supply = <&vreg_l4d>; 542 543 status = "okay"; 544}; 545 546&pcie3a { 547 perst-gpios = <&tlmm 151 GPIO_ACTIVE_LOW>; 548 wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>; 549 550 vddpe-3v3-supply = <&vreg_wwan>; 551 552 pinctrl-names = "default"; 553 pinctrl-0 = <&pcie3a_default>; 554 555 status = "okay"; 556}; 557 558&pcie3a_phy { 559 vdda-phy-supply = <&vreg_l6d>; 560 vdda-pll-supply = <&vreg_l4d>; 561 562 status = "okay"; 563}; 564 565&pcie4 { 566 max-link-speed = <2>; 567 568 perst-gpios = <&tlmm 141 GPIO_ACTIVE_LOW>; 569 wake-gpios = <&tlmm 139 GPIO_ACTIVE_LOW>; 570 571 vddpe-3v3-supply = <&vreg_wlan>; 572 573 pinctrl-names = "default"; 574 pinctrl-0 = <&pcie4_default>; 575 576 status = "okay"; 577}; 578 579&pcie4_phy { 580 vdda-phy-supply = <&vreg_l6d>; 581 vdda-pll-supply = <&vreg_l4d>; 582 583 status = "okay"; 584}; 585 586&pmc8280c_lpg { 587 status = "okay"; 588}; 589 590&pmk8280_pon_pwrkey { 591 status = "okay"; 592}; 593 594&pmk8280_rtc { 595 nvmem-cells = <&rtc_offset>; 596 nvmem-cell-names = "offset"; 597 598 status = "okay"; 599}; 600 601&pmk8280_sdam_6 { 602 status = "okay"; 603 604 rtc_offset: rtc-offset@bc { 605 reg = <0xbc 0x4>; 606 }; 607}; 608 609&qup0 { 610 status = "okay"; 611}; 612 613&qup1 { 614 status = "okay"; 615}; 616 617&qup2 { 618 status = "okay"; 619}; 620 621&remoteproc_adsp { 622 firmware-name = "qcom/sc8280xp/qcadsp8280.mbn"; 623 624 status = "okay"; 625}; 626 627&remoteproc_nsp0 { 628 firmware-name = "qcom/sc8280xp/qccdsp8280.mbn"; 629 630 status = "okay"; 631}; 632 633&sdc2 { 634 pinctrl-0 = <&sdc2_default_state>; 635 pinctrl-1 = <&sdc2_sleep_state>; 636 pinctrl-names = "default", "sleep"; 637 638 vmmc-supply = <&vreg_l9c>; 639 vqmmc-supply = <&vreg_l6c>; 640 641 cd-gpios = <&tlmm 131 GPIO_ACTIVE_LOW>; 642 643 status = "okay"; 644}; 645 646&uart17 { 647 compatible = "qcom,geni-debug-uart"; 648 649 status = "okay"; 650}; 651 652&ufs_mem_hc { 653 reset-gpios = <&tlmm 228 GPIO_ACTIVE_LOW>; 654 655 vcc-supply = <&vreg_l7c>; 656 vcc-max-microamp = <800000>; 657 vccq-supply = <&vreg_l3d>; 658 vccq-max-microamp = <900000>; 659 660 status = "okay"; 661}; 662 663&ufs_mem_phy { 664 vdda-phy-supply = <&vreg_l6b>; 665 vdda-pll-supply = <&vreg_l3b>; 666 667 status = "okay"; 668}; 669 670&usb_0 { 671 status = "okay"; 672}; 673 674&usb_0_dwc3 { 675 dr_mode = "host"; 676}; 677 678&usb_0_dwc3_hs { 679 remote-endpoint = <&pmic_glink_con0_hs>; 680}; 681 682&usb_0_hsphy { 683 vdda-pll-supply = <&vreg_l9d>; 684 vdda18-supply = <&vreg_l1c>; 685 vdda33-supply = <&vreg_l7d>; 686 687 status = "okay"; 688}; 689 690&usb_0_qmpphy { 691 vdda-phy-supply = <&vreg_l9d>; 692 vdda-pll-supply = <&vreg_l4d>; 693 694 orientation-switch; 695 696 status = "okay"; 697}; 698 699&usb_0_qmpphy_dp_in { 700 remote-endpoint = <&mdss0_dp0_out>; 701}; 702 703&usb_0_qmpphy_out { 704 remote-endpoint = <&pmic_glink_con0_ss>; 705}; 706 707&usb_1 { 708 status = "okay"; 709}; 710 711&usb_1_dwc3 { 712 dr_mode = "host"; 713}; 714 715&usb_1_dwc3_hs { 716 remote-endpoint = <&pmic_glink_con1_hs>; 717}; 718 719&usb_1_hsphy { 720 vdda-pll-supply = <&vreg_l4b>; 721 vdda18-supply = <&vreg_l1c>; 722 vdda33-supply = <&vreg_l13c>; 723 724 status = "okay"; 725}; 726 727&usb_1_qmpphy { 728 vdda-phy-supply = <&vreg_l4b>; 729 vdda-pll-supply = <&vreg_l3b>; 730 731 orientation-switch; 732 733 status = "okay"; 734}; 735 736&usb_1_qmpphy_dp_in { 737 remote-endpoint = <&mdss0_dp1_out>; 738}; 739 740&usb_1_qmpphy_out { 741 remote-endpoint = <&pmic_glink_con1_ss>; 742}; 743 744&xo_board_clk { 745 clock-frequency = <38400000>; 746}; 747 748/* PINCTRL - additions to nodes defined in sc8280xp.dtsi */ 749 750&pmc8280_1_gpios { 751 edp_bl_en: edp-bl-en-state { 752 pins = "gpio8"; 753 function = "normal"; 754 }; 755 756 edp_bl_reg_en: edp-bl-reg-en-state { 757 pins = "gpio9"; 758 function = "normal"; 759 }; 760 761 misc_3p3_reg_en: misc-3p3-reg-en-state { 762 pins = "gpio2"; 763 function = "normal"; 764 }; 765}; 766 767&pmc8280_2_gpios { 768 wwan_sw_en: wwan-sw-en-state { 769 pins = "gpio1"; 770 function = "normal"; 771 }; 772}; 773 774&pmc8280c_gpios { 775 edp_bl_pwm: edp-bl-pwm-state { 776 pins = "gpio8"; 777 function = "func1"; 778 }; 779}; 780 781&pmr735a_gpios { 782 hastings_reg_en: hastings-reg-en-state { 783 pins = "gpio1"; 784 function = "normal"; 785 }; 786}; 787 788&tlmm { 789 gpio-reserved-ranges = <74 6>, <83 4>, <125 2>, <128 2>, <154 7>; 790 791 edp_reg_en: edp-reg-en-state { 792 pins = "gpio25"; 793 function = "gpio"; 794 drive-strength = <16>; 795 bias-disable; 796 }; 797 798 i2c4_default: i2c4-default-state { 799 pins = "gpio171", "gpio172"; 800 function = "qup4"; 801 drive-strength = <16>; 802 bias-disable; 803 }; 804 805 i2c21_default: i2c21-default-state { 806 pins = "gpio81", "gpio82"; 807 function = "qup21"; 808 drive-strength = <16>; 809 bias-disable; 810 }; 811 812 kybd_default: kybd-default-state { 813 disable-pins { 814 pins = "gpio102"; 815 function = "gpio"; 816 output-low; 817 }; 818 819 int-n-pins { 820 pins = "gpio104"; 821 function = "gpio"; 822 bias-disable; 823 }; 824 825 reset-pins { 826 pins = "gpio105"; 827 function = "gpio"; 828 bias-disable; 829 }; 830 }; 831 832 nvme_reg_en: nvme-reg-en-state { 833 pins = "gpio135"; 834 function = "gpio"; 835 drive-strength = <2>; 836 bias-disable; 837 }; 838 839 pcie2a_default: pcie2a-default-state { 840 clkreq-n-pins { 841 pins = "gpio142"; 842 function = "pcie2a_clkreq"; 843 drive-strength = <2>; 844 bias-pull-up; 845 }; 846 847 perst-n-pins { 848 pins = "gpio143"; 849 function = "gpio"; 850 drive-strength = <2>; 851 bias-disable; 852 }; 853 854 wake-n-pins { 855 pins = "gpio145"; 856 function = "gpio"; 857 drive-strength = <2>; 858 bias-pull-up; 859 }; 860 }; 861 862 pcie3a_default: pcie3a-default-state { 863 clkreq-n-pins { 864 pins = "gpio150"; 865 function = "pcie3a_clkreq"; 866 drive-strength = <2>; 867 bias-pull-up; 868 }; 869 870 perst-n-pins { 871 pins = "gpio151"; 872 function = "gpio"; 873 drive-strength = <2>; 874 bias-disable; 875 }; 876 877 wake-n-pins { 878 pins = "gpio148"; 879 function = "gpio"; 880 drive-strength = <2>; 881 bias-pull-up; 882 }; 883 }; 884 885 pcie4_default: pcie4-default-state { 886 clkreq-n-pins { 887 pins = "gpio140"; 888 function = "pcie4_clkreq"; 889 drive-strength = <2>; 890 bias-pull-up; 891 }; 892 893 perst-n-pins { 894 pins = "gpio141"; 895 function = "gpio"; 896 drive-strength = <2>; 897 bias-disable; 898 }; 899 900 wake-n-pins { 901 pins = "gpio139"; 902 function = "gpio"; 903 drive-strength = <2>; 904 bias-pull-up; 905 }; 906 }; 907 908 sdc2_default_state: sdc2-default-state { 909 clk-pins { 910 pins = "sdc2_clk"; 911 drive-strength = <16>; 912 bias-disable; 913 }; 914 915 cmd-pins { 916 pins = "sdc2_cmd"; 917 drive-strength = <16>; 918 bias-pull-up; 919 }; 920 921 data-pins { 922 pins = "sdc2_data"; 923 drive-strength = <16>; 924 bias-pull-up; 925 }; 926 927 card-detect-pins { 928 pins = "gpio131"; 929 function = "gpio"; 930 drive-strength = <2>; 931 bias-disable; 932 }; 933 }; 934 935 sdc2_sleep_state: sdc2-sleep-state { 936 clk-pins { 937 pins = "sdc2_clk"; 938 drive-strength = <2>; 939 bias-disable; 940 }; 941 942 cmd-pins { 943 pins = "sdc2_cmd"; 944 drive-strength = <2>; 945 bias-pull-up; 946 }; 947 948 data-pins { 949 pins = "sdc2_data"; 950 drive-strength = <2>; 951 bias-pull-up; 952 }; 953 954 card-detect-pins { 955 pins = "gpio131"; 956 function = "gpio"; 957 drive-strength = <2>; 958 bias-disable; 959 }; 960 }; 961 962 tpad_default: tpad-default-state { 963 int-n-pins { 964 pins = "gpio182"; 965 function = "gpio"; 966 bias-disable; 967 }; 968 }; 969 970 ts0_default: ts0-default-state { 971 int-n-pins { 972 pins = "gpio175"; 973 function = "gpio"; 974 bias-disable; 975 }; 976 977 reset-n-pins { 978 pins = "gpio99"; 979 function = "gpio"; 980 bias-disable; 981 }; 982 }; 983 984 usb0_sbu_default: usb0-sbu-state { 985 oe-n-pins { 986 pins = "gpio101"; 987 function = "gpio"; 988 bias-disable; 989 drive-strength = <16>; 990 output-high; 991 }; 992 993 sel-pins { 994 pins = "gpio164"; 995 function = "gpio"; 996 bias-disable; 997 drive-strength = <16>; 998 }; 999 1000 mode-pins { 1001 pins = "gpio167"; 1002 function = "gpio"; 1003 bias-disable; 1004 drive-strength = <16>; 1005 output-high; 1006 }; 1007 }; 1008 1009 usb1_sbu_default: usb1-sbu-state { 1010 oe-n-pins { 1011 pins = "gpio48"; 1012 function = "gpio"; 1013 bias-disable; 1014 drive-strength = <16>; 1015 output-high; 1016 }; 1017 1018 sel-pins { 1019 pins = "gpio47"; 1020 function = "gpio"; 1021 bias-disable; 1022 drive-strength = <16>; 1023 }; 1024 1025 mode-pins { 1026 pins = "gpio50"; 1027 function = "gpio"; 1028 bias-disable; 1029 drive-strength = <16>; 1030 output-high; 1031 }; 1032 }; 1033}; 1034