1// SPDX-License-Identifier: BSD-3-Clause 2/* 3 * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved. 4 * Copyright (c) 2020-2023, Linaro Limited 5 */ 6 7/dts-v1/; 8 9#include <dt-bindings/firmware/qcom,scm.h> 10#include <dt-bindings/gpio/gpio.h> 11#include <dt-bindings/input/gpio-keys.h> 12#include <dt-bindings/input/input.h> 13#include <dt-bindings/regulator/qcom,rpmh-regulator.h> 14#include "sc8180x.dtsi" 15#include "sc8180x-pmics.dtsi" 16 17/ { 18 model = "Lenovo Flex 5G"; 19 compatible = "lenovo,flex-5g", "qcom,sc8180x"; 20 21 aliases { 22 serial0 = &uart13; 23 }; 24 25 backlight: backlight { 26 compatible = "pwm-backlight"; 27 pwms = <&pmc8180c_lpg 4 1000000>; 28 enable-gpios = <&pmc8180c_gpios 8 GPIO_ACTIVE_HIGH>; 29 30 pinctrl-0 = <&bl_pwm_default>; 31 pinctrl-names = "default"; 32 }; 33 34 gpio-keys { 35 compatible = "gpio-keys"; 36 37 pinctrl-0 = <&hall_int_active_state>; 38 pinctrl-names = "default"; 39 40 lid-switch { 41 gpios = <&tlmm 121 GPIO_ACTIVE_LOW>; 42 linux,input-type = <EV_SW>; 43 linux,code = <SW_LID>; 44 wakeup-source; 45 wakeup-event-action = <EV_ACT_DEASSERTED>; 46 }; 47 }; 48 49 pmic-glink { 50 compatible = "qcom,sc8180x-pmic-glink", "qcom,pmic-glink"; 51 52 #address-cells = <1>; 53 #size-cells = <0>; 54 55 connector@0 { 56 compatible = "usb-c-connector"; 57 reg = <0>; 58 power-role = "dual"; 59 data-role = "dual"; 60 61 ports { 62 #address-cells = <1>; 63 #size-cells = <0>; 64 65 port@0 { 66 reg = <0>; 67 68 pmic_glink_con0_hs: endpoint { 69 remote-endpoint = <&usb_prim_role_switch>; 70 }; 71 }; 72 73 port@1 { 74 reg = <1>; 75 76 pmic_glink_con0_ss: endpoint { 77 remote-endpoint = <&usb_prim_qmpphy_out>; 78 }; 79 }; 80 81 port@2 { 82 reg = <2>; 83 84 pmic_glink_con0_sbu: endpoint { 85 remote-endpoint = <&usbprim_sbu_mux>; 86 }; 87 }; 88 }; 89 }; 90 91 connector@1 { 92 compatible = "usb-c-connector"; 93 reg = <1>; 94 power-role = "dual"; 95 data-role = "dual"; 96 97 ports { 98 #address-cells = <1>; 99 #size-cells = <0>; 100 port@0 { 101 reg = <0>; 102 103 pmic_glink_con1_hs: endpoint { 104 remote-endpoint = <&usb_sec_role_switch>; 105 }; 106 }; 107 108 port@1 { 109 reg = <1>; 110 111 pmic_glink_con1_ss: endpoint { 112 remote-endpoint = <&usb_sec_qmpphy_out>; 113 }; 114 }; 115 116 port@2 { 117 reg = <2>; 118 119 pmic_glink_con1_sbu: endpoint { 120 remote-endpoint = <&usbsec_sbu_mux>; 121 }; 122 }; 123 }; 124 }; 125 }; 126 127 reserved-memory { 128 rmtfs_mem: rmtfs-region@85500000 { 129 compatible = "qcom,rmtfs-mem"; 130 reg = <0x0 0x85500000 0x0 0x200000>; 131 no-map; 132 133 qcom,client-id = <1>; 134 qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>; 135 }; 136 137 wlan_mem: wlan-region@8bc00000 { 138 reg = <0x0 0x8bc00000 0x0 0x180000>; 139 no-map; 140 }; 141 142 mpss_mem: mpss-region@8d800000 { 143 reg = <0x0 0x8d800000 0x0 0x3000000>; 144 no-map; 145 }; 146 147 adsp_mem: adsp-region@90800000 { 148 reg = <0x0 0x90800000 0x0 0x1c00000>; 149 no-map; 150 }; 151 152 gpu_mem: gpu-region@98715000 { 153 reg = <0x0 0x98715000 0x0 0x2000>; 154 no-map; 155 }; 156 157 cdsp_mem: cdsp-region@98900000 { 158 reg = <0x0 0x98900000 0x0 0x1400000>; 159 no-map; 160 }; 161 }; 162 163 vph_pwr: vph-pwr-regulator { 164 compatible = "regulator-fixed"; 165 regulator-name = "vph_pwr"; 166 regulator-min-microvolt = <3700000>; 167 regulator-max-microvolt = <3700000>; 168 }; 169 170 vreg_s4a_1p8: pm8150-s4-regulator { 171 compatible = "regulator-fixed"; 172 regulator-name = "vreg_s4a_1p8"; 173 174 regulator-min-microvolt = <1800000>; 175 regulator-max-microvolt = <1800000>; 176 177 regulator-always-on; 178 regulator-boot-on; 179 180 vin-supply = <&vph_pwr>; 181 }; 182 183 usbprim-sbu-mux { 184 compatible = "pericom,pi3usb102", "gpio-sbu-mux"; 185 186 enable-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>; 187 select-gpios = <&tlmm 100 GPIO_ACTIVE_HIGH>; 188 189 pinctrl-names = "default"; 190 pinctrl-0 = <&usbprim_sbu_default>; 191 192 mode-switch; 193 orientation-switch; 194 195 port { 196 usbprim_sbu_mux: endpoint { 197 remote-endpoint = <&pmic_glink_con0_sbu>; 198 }; 199 }; 200 }; 201 202 usbsec-sbu-mux { 203 compatible = "pericom,pi3usb102", "gpio-sbu-mux"; 204 205 enable-gpios = <&tlmm 188 GPIO_ACTIVE_LOW>; 206 select-gpios = <&tlmm 187 GPIO_ACTIVE_HIGH>; 207 208 pinctrl-names = "default"; 209 pinctrl-0 = <&usbsec_sbu_default>; 210 211 mode-switch; 212 orientation-switch; 213 214 port { 215 usbsec_sbu_mux: endpoint { 216 remote-endpoint = <&pmic_glink_con1_sbu>; 217 }; 218 }; 219 }; 220}; 221 222&apps_rsc { 223 regulators-0 { 224 compatible = "qcom,pmc8180-rpmh-regulators"; 225 qcom,pmic-id = "a"; 226 227 vdd-s5-supply = <&vph_pwr>; 228 vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p0>; 229 230 vreg_s5a_2p0: smps5 { 231 regulator-min-microvolt = <2040000>; 232 regulator-max-microvolt = <2100000>; 233 }; 234 235 vreg_l7a_1p8: ldo7 { 236 regulator-min-microvolt = <1800000>; 237 regulator-max-microvolt = <1800000>; 238 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 239 }; 240 241 vreg_l9a_1p3: ldo9 { 242 regulator-min-microvolt = <1296000>; 243 regulator-max-microvolt = <1304000>; 244 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 245 }; 246 247 vreg_l12a_1p8: ldo12 { 248 regulator-min-microvolt = <1800000>; 249 regulator-max-microvolt = <1800000>; 250 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 251 }; 252 }; 253 254 regulators-1 { 255 compatible = "qcom,pmc8180c-rpmh-regulators"; 256 qcom,pmic-id = "c"; 257 258 vdd-s6-supply = <&vph_pwr>; 259 vdd-l2-l3-supply = <&vreg_s6c_1p35>; 260 vdd-bob-supply = <&vph_pwr>; 261 262 vreg_s6c_1p35: smps6 { 263 regulator-min-microvolt = <1350000>; 264 regulator-max-microvolt = <1372000>; 265 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 266 }; 267 268 vreg_l3c_1p2: ldo3 { 269 regulator-min-microvolt = <1200000>; 270 regulator-max-microvolt = <1200000>; 271 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 272 }; 273 274 vreg_l10c_3p3: ldo10 { 275 regulator-min-microvolt = <3000000>; 276 regulator-max-microvolt = <3312000>; 277 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 278 }; 279 280 vreg_l11c_3p3: ldo11 { 281 regulator-min-microvolt = <3296000>; 282 regulator-max-microvolt = <3304000>; 283 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 284 }; 285 286 vreg_bob: bob { 287 regulator-min-microvolt = <3296000>; 288 regulator-max-microvolt = <3350000>; 289 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 290 }; 291 }; 292 293 regulators-2 { 294 compatible = "qcom,pmc8180-rpmh-regulators"; 295 qcom,pmic-id = "e"; 296 297 vdd-s4-supply = <&vph_pwr>; 298 vdd-s5-supply = <&vph_pwr>; 299 vdd-l2-l10-supply = <&vreg_bob>; 300 vdd-l3-l4-l5-l18-supply = <&vreg_s4e_0p98>; 301 vdd-l7-l12-l14-l15-supply = <&vreg_s5e_2p05>; 302 vdd-l13-l16-l17-supply = <&vreg_bob>; 303 304 vreg_s4e_0p98: smps4 { 305 regulator-min-microvolt = <992000>; 306 regulator-max-microvolt = <992000>; 307 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 308 }; 309 310 vreg_s5e_2p05: smps5 { 311 regulator-min-microvolt = <2040000>; 312 regulator-max-microvolt = <2040000>; 313 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 314 }; 315 316 vreg_l1e_0p75: ldo1 { 317 regulator-min-microvolt = <752000>; 318 regulator-max-microvolt = <752000>; 319 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 320 }; 321 322 vreg_l5e_0p88: ldo5 { 323 regulator-min-microvolt = <880000>; 324 regulator-max-microvolt = <880000>; 325 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 326 }; 327 328 vreg_l7e_1p8: ldo7 { 329 regulator-min-microvolt = <1800000>; 330 regulator-max-microvolt = <1800000>; 331 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 332 }; 333 334 vreg_l10e_2p9: ldo10 { 335 regulator-min-microvolt = <2904000>; 336 regulator-max-microvolt = <2904000>; 337 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 338 }; 339 340 vreg_l16e_3p0: ldo16 { 341 regulator-min-microvolt = <3072000>; 342 regulator-max-microvolt = <3072000>; 343 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 344 }; 345 }; 346}; 347 348&gpu { 349 status = "okay"; 350 351 zap-shader { 352 memory-region = <&gpu_mem>; 353 firmware-name = "qcom/sc8180x/qcdxkmsuc8180.mbn"; 354 }; 355}; 356 357&i2c1 { 358 clock-frequency = <100000>; 359 360 pinctrl-0 = <&i2c1_active>, <&i2c1_hid_active>; 361 pinctrl-names = "default"; 362 363 status = "okay"; 364 365 hid@10 { 366 compatible = "hid-over-i2c"; 367 reg = <0x10>; 368 hid-descr-addr = <0x1>; 369 370 interrupts-extended = <&tlmm 122 IRQ_TYPE_LEVEL_LOW>; 371 }; 372}; 373 374&i2c7 { 375 clock-frequency = <100000>; 376 377 pinctrl-0 = <&i2c7_active>, <&i2c7_hid_active>; 378 pinctrl-names = "default"; 379 380 status = "okay"; 381 382 hid@5 { 383 compatible = "hid-over-i2c"; 384 reg = <0x5>; 385 hid-descr-addr = <0x20>; 386 387 interrupts-extended = <&tlmm 37 IRQ_TYPE_LEVEL_LOW>; 388 }; 389 390 hid@2c { 391 compatible = "hid-over-i2c"; 392 reg = <0x2c>; 393 hid-descr-addr = <0x20>; 394 395 interrupts-extended = <&tlmm 24 IRQ_TYPE_LEVEL_LOW>; 396 }; 397}; 398 399&mdss { 400 status = "okay"; 401}; 402 403&mdss_dp0 { 404 status = "okay"; 405}; 406 407&mdss_dp0_out { 408 data-lanes = <0 1>; 409 remote-endpoint = <&usb_prim_qmpphy_dp_in>; 410}; 411 412&mdss_dp1 { 413 status = "okay"; 414}; 415 416&mdss_dp1_out { 417 data-lanes = <0 1>; 418 remote-endpoint = <&usb_sec_qmpphy_dp_in>; 419}; 420 421&mdss_edp { 422 data-lanes = <0 1 2 3>; 423 424 pinctrl-0 = <&edp_hpd_active>; 425 pinctrl-names = "default"; 426 427 status = "okay"; 428 429 aux-bus { 430 panel { 431 compatible = "edp-panel"; 432 no-hpd; 433 434 backlight = <&backlight>; 435 436 port { 437 auo_b140han06_in: endpoint { 438 remote-endpoint = <&mdss_edp_out>; 439 }; 440 }; 441 }; 442 }; 443 444 ports { 445 port@1 { 446 reg = <1>; 447 mdss_edp_out: endpoint { 448 remote-endpoint = <&auo_b140han06_in>; 449 }; 450 }; 451 }; 452}; 453 454&pcie3 { 455 perst-gpio = <&tlmm 178 GPIO_ACTIVE_LOW>; 456 wake-gpio = <&tlmm 180 GPIO_ACTIVE_HIGH>; 457 pinctrl-0 = <&pcie3_default_state>; 458 pinctrl-names = "default"; 459 460 status = "okay"; 461}; 462 463&pcie3_phy { 464 vdda-phy-supply = <&vreg_l5e_0p88>; 465 vdda-pll-supply = <&vreg_l3c_1p2>; 466 467 status = "okay"; 468}; 469 470&pmc8180c_lpg { 471 status = "okay"; 472}; 473 474&qupv3_id_0 { 475 status = "okay"; 476}; 477 478&qupv3_id_1 { 479 status = "okay"; 480}; 481 482&qupv3_id_2 { 483 status = "okay"; 484}; 485 486&remoteproc_adsp { 487 memory-region = <&adsp_mem>; 488 firmware-name = "qcom/sc8180x/LENOVO/82AK/qcadsp8180.mbn"; 489 490 status = "okay"; 491}; 492 493&remoteproc_cdsp { 494 memory-region = <&cdsp_mem>; 495 firmware-name = "qcom/sc8180x/LENOVO/82AK/qccdsp8180.mbn"; 496 497 status = "okay"; 498}; 499 500&remoteproc_mpss { 501 memory-region = <&mpss_mem>; 502 firmware-name = "qcom/sc8180x/LENOVO/82AK/qcmpss8180_nm.mbn"; 503 504 status = "okay"; 505}; 506 507&uart13 { 508 pinctrl-0 = <&uart13_state>; 509 pinctrl-names = "default"; 510 511 status = "okay"; 512 513 bluetooth { 514 compatible = "qcom,wcn3998-bt"; 515 516 vddio-supply = <&vreg_s4a_1p8>; 517 vddxo-supply = <&vreg_l7a_1p8>; 518 vddrf-supply = <&vreg_l9a_1p3>; 519 vddch0-supply = <&vreg_l11c_3p3>; 520 max-speed = <3200000>; 521 }; 522}; 523 524&ufs_mem_hc { 525 reset-gpios = <&tlmm 190 GPIO_ACTIVE_LOW>; 526 527 vcc-supply = <&vreg_l10e_2p9>; 528 vcc-max-microamp = <155000>; 529 530 vccq2-supply = <&vreg_l7e_1p8>; 531 vccq2-max-microamp = <425000>; 532 533 status = "okay"; 534}; 535 536&ufs_mem_phy { 537 vdda-phy-supply = <&vreg_l5e_0p88>; 538 vdda-pll-supply = <&vreg_l3c_1p2>; 539 540 status = "okay"; 541}; 542 543&usb_prim_hsphy { 544 vdda-pll-supply = <&vreg_l5e_0p88>; 545 vdda18-supply = <&vreg_l12a_1p8>; 546 vdda33-supply = <&vreg_l16e_3p0>; 547 548 status = "okay"; 549}; 550 551&usb_prim_qmpphy { 552 vdda-phy-supply = <&vreg_l3c_1p2>; 553 vdda-pll-supply = <&vreg_l5e_0p88>; 554 555 orientation-switch; 556 557 status = "okay"; 558}; 559 560&usb_prim { 561 status = "okay"; 562}; 563 564&usb_prim_dwc3 { 565 dr_mode = "host"; 566}; 567 568&usb_prim_qmpphy_dp_in { 569 remote-endpoint = <&mdss_dp0_out>; 570}; 571 572&usb_prim_qmpphy_out { 573 remote-endpoint = <&pmic_glink_con0_ss>; 574}; 575 576&usb_prim_role_switch { 577 remote-endpoint = <&pmic_glink_con0_hs>; 578}; 579 580&usb_sec_hsphy { 581 vdda-pll-supply = <&vreg_l5e_0p88>; 582 vdda18-supply = <&vreg_l12a_1p8>; 583 vdda33-supply = <&vreg_l16e_3p0>; 584 585 status = "okay"; 586}; 587 588&usb_sec_qmpphy { 589 vdda-phy-supply = <&vreg_l3c_1p2>; 590 vdda-pll-supply = <&vreg_l5e_0p88>; 591 592 orientation-switch; 593 594 status = "okay"; 595}; 596 597&usb_sec_qmpphy_dp_in { 598 remote-endpoint = <&mdss_dp1_out>; 599}; 600 601&usb_sec_qmpphy_out { 602 remote-endpoint = <&pmic_glink_con1_ss>; 603}; 604 605&usb_sec_role_switch { 606 remote-endpoint = <&pmic_glink_con1_hs>; 607}; 608 609&usb_sec { 610 status = "okay"; 611}; 612 613&usb_sec_dwc3 { 614 dr_mode = "host"; 615}; 616 617&wifi { 618 memory-region = <&wlan_mem>; 619 620 vdd-0.8-cx-mx-supply = <&vreg_l1e_0p75>; 621 vdd-1.8-xo-supply = <&vreg_l7a_1p8>; 622 vdd-1.3-rfa-supply = <&vreg_l9a_1p3>; 623 vdd-3.3-ch0-supply = <&vreg_l11c_3p3>; 624 vdd-3.3-ch1-supply = <&vreg_l10c_3p3>; 625 626 status = "okay"; 627}; 628 629&xo_board_clk { 630 clock-frequency = <38400000>; 631}; 632 633/* PINCTRL */ 634 635&pmc8180c_gpios { 636 bl_pwm_default: bl-pwm-default-state { 637 en-pins { 638 pins = "gpio8"; 639 function = "normal"; 640 }; 641 642 pwm-pins { 643 pins = "gpio10"; 644 function = "func1"; 645 }; 646 }; 647}; 648 649&tlmm { 650 gpio-reserved-ranges = <0 4>, <47 4>, <126 4>; 651 652 edp_hpd_active: epd-hpd-active-state { 653 pins = "gpio10"; 654 function = "edp_hot"; 655 }; 656 657 hall_int_active_state: hall-int-active-state { 658 pins = "gpio121"; 659 function = "gpio"; 660 661 bias-disable; 662 }; 663 664 i2c1_active: i2c1-active-state { 665 pins = "gpio114", "gpio115"; 666 function = "qup1"; 667 668 bias-pull-up = <1>; 669 drive-strength = <2>; 670 }; 671 672 i2c1_hid_active: i2c1-hid-active-state { 673 pins = "gpio122"; 674 function = "gpio"; 675 676 bias-pull-up; 677 drive-strength = <2>; 678 }; 679 680 i2c7_active: i2c7-active-state { 681 pins = "gpio98", "gpio99"; 682 function = "qup7"; 683 684 bias-pull-up; 685 drive-strength = <2>; 686 }; 687 688 i2c7_hid_active: i2c7-hid-active-state { 689 pins = "gpio37", "gpio24"; 690 function = "gpio"; 691 692 bias-pull-up; 693 drive-strength = <2>; 694 }; 695 696 pcie3_default_state: pcie3-default-state { 697 clkreq-pins { 698 pins = "gpio179"; 699 function = "pci_e3"; 700 bias-pull-up; 701 }; 702 703 reset-n-pins { 704 pins = "gpio178"; 705 function = "gpio"; 706 707 drive-strength = <2>; 708 output-low; 709 bias-pull-down; 710 }; 711 712 wake-n-pins { 713 pins = "gpio180"; 714 function = "gpio"; 715 716 drive-strength = <2>; 717 bias-pull-up; 718 }; 719 }; 720 721 usbprim_sbu_default: usbprim-sbu-state { 722 oe-n-pins { 723 pins = "gpio152"; 724 function = "gpio"; 725 bias-disable; 726 drive-strength = <16>; 727 output-high; 728 }; 729 730 sel-pins { 731 pins = "gpio100"; 732 function = "gpio"; 733 bias-disable; 734 drive-strength = <16>; 735 }; 736 }; 737 738 usbsec_sbu_default: usbsec-sbu-state { 739 oe-n-pins { 740 pins = "gpio188"; 741 function = "gpio"; 742 bias-disable; 743 drive-strength = <16>; 744 output-high; 745 }; 746 747 sel-pins { 748 pins = "gpio187"; 749 function = "gpio"; 750 bias-disable; 751 drive-strength = <16>; 752 }; 753 }; 754 755 uart13_state: uart13-state { 756 cts-pins { 757 pins = "gpio43"; 758 function = "qup13"; 759 bias-pull-down; 760 }; 761 762 rts-tx-pins { 763 pins = "gpio44", "gpio45"; 764 function = "qup13"; 765 drive-strength = <2>; 766 bias-disable; 767 }; 768 769 rx-pins { 770 pins = "gpio46"; 771 function = "qup13"; 772 bias-pull-up; 773 }; 774 }; 775}; 776