xref: /linux/arch/arm64/boot/dts/qcom/sc7180.dtsi (revision c1124180eb9883891ad2acef89c9d17d6190eab4)

// SPDX-License-Identifier: BSD-3-Clause
/*
 * SC7180 SoC device tree source
 *
 * Copyright (c) 2019-2020, The Linux Foundation. All rights reserved.
 */

#include <dt-bindings/clock/qcom,dispcc-sc7180.h>
#include <dt-bindings/clock/qcom,gcc-sc7180.h>
#include <dt-bindings/clock/qcom,gpucc-sc7180.h>
#include <dt-bindings/clock/qcom,lpasscorecc-sc7180.h>
#include <dt-bindings/clock/qcom,rpmh.h>
#include <dt-bindings/clock/qcom,videocc-sc7180.h>
#include <dt-bindings/interconnect/qcom,osm-l3.h>
#include <dt-bindings/interconnect/qcom,sc7180.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/phy/phy-qcom-qusb2.h>
#include <dt-bindings/power/qcom-aoss-qmp.h>
#include <dt-bindings/power/qcom-rpmpd.h>
#include <dt-bindings/reset/qcom,sdm845-aoss.h>
#include <dt-bindings/reset/qcom,sdm845-pdc.h>
#include <dt-bindings/soc/qcom,rpmh-rsc.h>
#include <dt-bindings/thermal/thermal.h>

/ {
	interrupt-parent = <&intc>;

	#address-cells = <2>;
	#size-cells = <2>;

	chosen { };

	aliases {
		mmc1 = &sdhc_1;
		mmc2 = &sdhc_2;
		i2c0 = &i2c0;
		i2c1 = &i2c1;
		i2c2 = &i2c2;
		i2c3 = &i2c3;
		i2c4 = &i2c4;
		i2c5 = &i2c5;
		i2c6 = &i2c6;
		i2c7 = &i2c7;
		i2c8 = &i2c8;
		i2c9 = &i2c9;
		i2c10 = &i2c10;
		i2c11 = &i2c11;
		spi0 = &spi0;
		spi1 = &spi1;
		spi3 = &spi3;
		spi5 = &spi5;
		spi6 = &spi6;
		spi8 = &spi8;
		spi10 = &spi10;
		spi11 = &spi11;
	};

	clocks {
		xo_board: xo-board {
			compatible = "fixed-clock";
			clock-frequency = <38400000>;
			#clock-cells = <0>;
		};

		sleep_clk: sleep-clk {
			compatible = "fixed-clock";
			clock-frequency = <32764>;
			#clock-cells = <0>;
		};
	};

	reserved_memory: reserved-memory {
		#address-cells = <2>;
		#size-cells = <2>;
		ranges;

		hyp_mem: memory@80000000 {
			reg = <0x0 0x80000000 0x0 0x600000>;
			no-map;
		};

		xbl_mem: memory@80600000 {
			reg = <0x0 0x80600000 0x0 0x200000>;
			no-map;
		};

		aop_mem: memory@80800000 {
			reg = <0x0 0x80800000 0x0 0x20000>;
			no-map;
		};

		aop_cmd_db_mem: memory@80820000 {
			reg = <0x0 0x80820000 0x0 0x20000>;
			compatible = "qcom,cmd-db";
			no-map;
		};

		sec_apps_mem: memory@808ff000 {
			reg = <0x0 0x808ff000 0x0 0x1000>;
			no-map;
		};

		smem_mem: memory@80900000 {
			reg = <0x0 0x80900000 0x0 0x200000>;
			no-map;
		};

		tz_mem: memory@80b00000 {
			reg = <0x0 0x80b00000 0x0 0x3900000>;
			no-map;
		};

		rmtfs_mem: memory@94600000 {
			compatible = "qcom,rmtfs-mem";
			reg = <0x0 0x94600000 0x0 0x200000>;
			no-map;

			qcom,client-id = <1>;
			qcom,vmid = <15>;
		};
	};

	cpus {
		#address-cells = <2>;
		#size-cells = <0>;

		CPU0: cpu@0 {
			device_type = "cpu";
			compatible = "qcom,kryo468";
			reg = <0x0 0x0>;
			enable-method = "psci";
			cpu-idle-states = <&LITTLE_CPU_SLEEP_0
					   &LITTLE_CPU_SLEEP_1
					   &CLUSTER_SLEEP_0>;
			capacity-dmips-mhz = <1024>;
			dynamic-power-coefficient = <100>;
			operating-points-v2 = <&cpu0_opp_table>;
			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
			next-level-cache = <&L2_0>;
			#cooling-cells = <2>;
			qcom,freq-domain = <&cpufreq_hw 0>;
			L2_0: l2-cache {
				compatible = "cache";
				next-level-cache = <&L3_0>;
				L3_0: l3-cache {
					compatible = "cache";
				};
			};
		};

		CPU1: cpu@100 {
			device_type = "cpu";
			compatible = "qcom,kryo468";
			reg = <0x0 0x100>;
			enable-method = "psci";
			cpu-idle-states = <&LITTLE_CPU_SLEEP_0
					   &LITTLE_CPU_SLEEP_1
					   &CLUSTER_SLEEP_0>;
			capacity-dmips-mhz = <1024>;
			dynamic-power-coefficient = <100>;
			next-level-cache = <&L2_100>;
			operating-points-v2 = <&cpu0_opp_table>;
			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
			#cooling-cells = <2>;
			qcom,freq-domain = <&cpufreq_hw 0>;
			L2_100: l2-cache {
				compatible = "cache";
				next-level-cache = <&L3_0>;
			};
		};

		CPU2: cpu@200 {
			device_type = "cpu";
			compatible = "qcom,kryo468";
			reg = <0x0 0x200>;
			enable-method = "psci";
			cpu-idle-states = <&LITTLE_CPU_SLEEP_0
					   &LITTLE_CPU_SLEEP_1
					   &CLUSTER_SLEEP_0>;
			capacity-dmips-mhz = <1024>;
			dynamic-power-coefficient = <100>;
			next-level-cache = <&L2_200>;
			operating-points-v2 = <&cpu0_opp_table>;
			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
			#cooling-cells = <2>;
			qcom,freq-domain = <&cpufreq_hw 0>;
			L2_200: l2-cache {
				compatible = "cache";
				next-level-cache = <&L3_0>;
			};
		};

		CPU3: cpu@300 {
			device_type = "cpu";
			compatible = "qcom,kryo468";
			reg = <0x0 0x300>;
			enable-method = "psci";
			cpu-idle-states = <&LITTLE_CPU_SLEEP_0
					   &LITTLE_CPU_SLEEP_1
					   &CLUSTER_SLEEP_0>;
			capacity-dmips-mhz = <1024>;
			dynamic-power-coefficient = <100>;
			next-level-cache = <&L2_300>;
			operating-points-v2 = <&cpu0_opp_table>;
			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
			#cooling-cells = <2>;
			qcom,freq-domain = <&cpufreq_hw 0>;
			L2_300: l2-cache {
				compatible = "cache";
				next-level-cache = <&L3_0>;
			};
		};

		CPU4: cpu@400 {
			device_type = "cpu";
			compatible = "qcom,kryo468";
			reg = <0x0 0x400>;
			enable-method = "psci";
			cpu-idle-states = <&LITTLE_CPU_SLEEP_0
					   &LITTLE_CPU_SLEEP_1
					   &CLUSTER_SLEEP_0>;
			capacity-dmips-mhz = <1024>;
			dynamic-power-coefficient = <100>;
			next-level-cache = <&L2_400>;
			operating-points-v2 = <&cpu0_opp_table>;
			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
			#cooling-cells = <2>;
			qcom,freq-domain = <&cpufreq_hw 0>;
			L2_400: l2-cache {
				compatible = "cache";
				next-level-cache = <&L3_0>;
			};
		};

		CPU5: cpu@500 {
			device_type = "cpu";
			compatible = "qcom,kryo468";
			reg = <0x0 0x500>;
			enable-method = "psci";
			cpu-idle-states = <&LITTLE_CPU_SLEEP_0
					   &LITTLE_CPU_SLEEP_1
					   &CLUSTER_SLEEP_0>;
			capacity-dmips-mhz = <1024>;
			dynamic-power-coefficient = <100>;
			next-level-cache = <&L2_500>;
			operating-points-v2 = <&cpu0_opp_table>;
			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
			#cooling-cells = <2>;
			qcom,freq-domain = <&cpufreq_hw 0>;
			L2_500: l2-cache {
				compatible = "cache";
				next-level-cache = <&L3_0>;
			};
		};

		CPU6: cpu@600 {
			device_type = "cpu";
			compatible = "qcom,kryo468";
			reg = <0x0 0x600>;
			enable-method = "psci";
			cpu-idle-states = <&BIG_CPU_SLEEP_0
					   &BIG_CPU_SLEEP_1
					   &CLUSTER_SLEEP_0>;
			capacity-dmips-mhz = <1740>;
			dynamic-power-coefficient = <405>;
			next-level-cache = <&L2_600>;
			operating-points-v2 = <&cpu6_opp_table>;
			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
			#cooling-cells = <2>;
			qcom,freq-domain = <&cpufreq_hw 1>;
			L2_600: l2-cache {
				compatible = "cache";
				next-level-cache = <&L3_0>;
			};
		};

		CPU7: cpu@700 {
			device_type = "cpu";
			compatible = "qcom,kryo468";
			reg = <0x0 0x700>;
			enable-method = "psci";
			cpu-idle-states = <&BIG_CPU_SLEEP_0
					   &BIG_CPU_SLEEP_1
					   &CLUSTER_SLEEP_0>;
			capacity-dmips-mhz = <1740>;
			dynamic-power-coefficient = <405>;
			next-level-cache = <&L2_700>;
			operating-points-v2 = <&cpu6_opp_table>;
			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
			#cooling-cells = <2>;
			qcom,freq-domain = <&cpufreq_hw 1>;
			L2_700: l2-cache {
				compatible = "cache";
				next-level-cache = <&L3_0>;
			};
		};

		cpu-map {
			cluster0 {
				core0 {
					cpu = <&CPU0>;
				};

				core1 {
					cpu = <&CPU1>;
				};

				core2 {
					cpu = <&CPU2>;
				};

				core3 {
					cpu = <&CPU3>;
				};

				core4 {
					cpu = <&CPU4>;
				};

				core5 {
					cpu = <&CPU5>;
				};

				core6 {
					cpu = <&CPU6>;
				};

				core7 {
					cpu = <&CPU7>;
				};
			};
		};

		idle-states {
			entry-method = "psci";

			LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 {
				compatible = "arm,idle-state";
				idle-state-name = "little-power-down";
				arm,psci-suspend-param = <0x40000003>;
				entry-latency-us = <549>;
				exit-latency-us = <901>;
				min-residency-us = <1774>;
				local-timer-stop;
			};

			LITTLE_CPU_SLEEP_1: cpu-sleep-0-1 {
				compatible = "arm,idle-state";
				idle-state-name = "little-rail-power-down";
				arm,psci-suspend-param = <0x40000004>;
				entry-latency-us = <702>;
				exit-latency-us = <915>;
				min-residency-us = <4001>;
				local-timer-stop;
			};

			BIG_CPU_SLEEP_0: cpu-sleep-1-0 {
				compatible = "arm,idle-state";
				idle-state-name = "big-power-down";
				arm,psci-suspend-param = <0x40000003>;
				entry-latency-us = <523>;
				exit-latency-us = <1244>;
				min-residency-us = <2207>;
				local-timer-stop;
			};

			BIG_CPU_SLEEP_1: cpu-sleep-1-1 {
				compatible = "arm,idle-state";
				idle-state-name = "big-rail-power-down";
				arm,psci-suspend-param = <0x40000004>;
				entry-latency-us = <526>;
				exit-latency-us = <1854>;
				min-residency-us = <5555>;
				local-timer-stop;
			};

			CLUSTER_SLEEP_0: cluster-sleep-0 {
				compatible = "arm,idle-state";
				idle-state-name = "cluster-power-down";
				arm,psci-suspend-param = <0x40003444>;
				entry-latency-us = <3263>;
				exit-latency-us = <6562>;
				min-residency-us = <9926>;
				local-timer-stop;
			};
		};
	};

	cpu0_opp_table: cpu0_opp_table {
		compatible = "operating-points-v2";
		opp-shared;

		cpu0_opp1: opp-300000000 {
			opp-hz = /bits/ 64 <300000000>;
			opp-peak-kBps = <1200000 4800000>;
		};

		cpu0_opp2: opp-576000000 {
			opp-hz = /bits/ 64 <576000000>;
			opp-peak-kBps = <1200000 4800000>;
		};

		cpu0_opp3: opp-768000000 {
			opp-hz = /bits/ 64 <768000000>;
			opp-peak-kBps = <1200000 4800000>;
		};

		cpu0_opp4: opp-1017600000 {
			opp-hz = /bits/ 64 <1017600000>;
			opp-peak-kBps = <1804000 8908800>;
		};

		cpu0_opp5: opp-1248000000 {
			opp-hz = /bits/ 64 <1248000000>;
			opp-peak-kBps = <2188000 12902400>;
		};

		cpu0_opp6: opp-1324800000 {
			opp-hz = /bits/ 64 <1324800000>;
			opp-peak-kBps = <2188000 12902400>;
		};

		cpu0_opp7: opp-1516800000 {
			opp-hz = /bits/ 64 <1516800000>;
			opp-peak-kBps = <3072000 15052800>;
		};

		cpu0_opp8: opp-1612800000 {
			opp-hz = /bits/ 64 <1612800000>;
			opp-peak-kBps = <3072000 15052800>;
		};

		cpu0_opp9: opp-1708800000 {
			opp-hz = /bits/ 64 <1708800000>;
			opp-peak-kBps = <3072000 15052800>;
		};

		cpu0_opp10: opp-1804800000 {
			opp-hz = /bits/ 64 <1804800000>;
			opp-peak-kBps = <4068000 22425600>;
		};
	};

	cpu6_opp_table: cpu6_opp_table {
		compatible = "operating-points-v2";
		opp-shared;

		cpu6_opp1: opp-300000000 {
			opp-hz = /bits/ 64 <300000000>;
			opp-peak-kBps = <2188000 8908800>;
		};

		cpu6_opp2: opp-652800000 {
			opp-hz = /bits/ 64 <652800000>;
			opp-peak-kBps = <2188000 8908800>;
		};

		cpu6_opp3: opp-825600000 {
			opp-hz = /bits/ 64 <825600000>;
			opp-peak-kBps = <2188000 8908800>;
		};

		cpu6_opp4: opp-979200000 {
			opp-hz = /bits/ 64 <979200000>;
			opp-peak-kBps = <2188000 8908800>;
		};

		cpu6_opp5: opp-1113600000 {
			opp-hz = /bits/ 64 <1113600000>;
			opp-peak-kBps = <2188000 8908800>;
		};

		cpu6_opp6: opp-1267200000 {
			opp-hz = /bits/ 64 <1267200000>;
			opp-peak-kBps = <4068000 12902400>;
		};

		cpu6_opp7: opp-1555200000 {
			opp-hz = /bits/ 64 <1555200000>;
			opp-peak-kBps = <4068000 15052800>;
		};

		cpu6_opp8: opp-1708800000 {
			opp-hz = /bits/ 64 <1708800000>;
			opp-peak-kBps = <6220000 19353600>;
		};

		cpu6_opp9: opp-1843200000 {
			opp-hz = /bits/ 64 <1843200000>;
			opp-peak-kBps = <6220000 19353600>;
		};

		cpu6_opp10: opp-1900800000 {
			opp-hz = /bits/ 64 <1900800000>;
			opp-peak-kBps = <6220000 22425600>;
		};

		cpu6_opp11: opp-1996800000 {
			opp-hz = /bits/ 64 <1996800000>;
			opp-peak-kBps = <6220000 22425600>;
		};

		cpu6_opp12: opp-2112000000 {
			opp-hz = /bits/ 64 <2112000000>;
			opp-peak-kBps = <6220000 22425600>;
		};

		cpu6_opp13: opp-2208000000 {
			opp-hz = /bits/ 64 <2208000000>;
			opp-peak-kBps = <7216000 22425600>;
		};

		cpu6_opp14: opp-2323200000 {
			opp-hz = /bits/ 64 <2323200000>;
			opp-peak-kBps = <7216000 22425600>;
		};

		cpu6_opp15: opp-2400000000 {
			opp-hz = /bits/ 64 <2400000000>;
			opp-peak-kBps = <8532000 23347200>;
		};

		cpu6_opp16: opp-2553600000 {
			opp-hz = /bits/ 64 <2553600000>;
			opp-peak-kBps = <8532000 23347200>;
		};
	};

	memory@80000000 {
		device_type = "memory";
		/* We expect the bootloader to fill in the size */
		reg = <0 0x80000000 0 0>;
	};

	pmu {
		compatible = "arm,armv8-pmuv3";
		interrupts = <GIC_PPI 5 IRQ_TYPE_LEVEL_HIGH>;
	};

	firmware {
		scm {
			compatible = "qcom,scm-sc7180", "qcom,scm";
		};
	};

	tcsr_mutex: hwlock {
		compatible = "qcom,tcsr-mutex";
		syscon = <&tcsr_mutex_regs 0 0x1000>;
		#hwlock-cells = <1>;
	};

	smem {
		compatible = "qcom,smem";
		memory-region = <&smem_mem>;
		hwlocks = <&tcsr_mutex 3>;
	};

	smp2p-cdsp {
		compatible = "qcom,smp2p";
		qcom,smem = <94>, <432>;

		interrupts = <GIC_SPI 576 IRQ_TYPE_EDGE_RISING>;

		mboxes = <&apss_shared 6>;

		qcom,local-pid = <0>;
		qcom,remote-pid = <5>;

		cdsp_smp2p_out: master-kernel {
			qcom,entry-name = "master-kernel";
			#qcom,smem-state-cells = <1>;
		};

		cdsp_smp2p_in: slave-kernel {
			qcom,entry-name = "slave-kernel";

			interrupt-controller;
			#interrupt-cells = <2>;
		};
	};

	smp2p-lpass {
		compatible = "qcom,smp2p";
		qcom,smem = <443>, <429>;

		interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>;

		mboxes = <&apss_shared 10>;

		qcom,local-pid = <0>;
		qcom,remote-pid = <2>;

		adsp_smp2p_out: master-kernel {
			qcom,entry-name = "master-kernel";
			#qcom,smem-state-cells = <1>;
		};

		adsp_smp2p_in: slave-kernel {
			qcom,entry-name = "slave-kernel";

			interrupt-controller;
			#interrupt-cells = <2>;
		};
	};

	smp2p-mpss {
		compatible = "qcom,smp2p";
		qcom,smem = <435>, <428>;
		interrupts = <GIC_SPI 451 IRQ_TYPE_EDGE_RISING>;
		mboxes = <&apss_shared 14>;
		qcom,local-pid = <0>;
		qcom,remote-pid = <1>;

		modem_smp2p_out: master-kernel {
			qcom,entry-name = "master-kernel";
			#qcom,smem-state-cells = <1>;
		};

		modem_smp2p_in: slave-kernel {
			qcom,entry-name = "slave-kernel";
			interrupt-controller;
			#interrupt-cells = <2>;
		};

		ipa_smp2p_out: ipa-ap-to-modem {
			qcom,entry-name = "ipa";
			#qcom,smem-state-cells = <1>;
		};

		ipa_smp2p_in: ipa-modem-to-ap {
			qcom,entry-name = "ipa";
			interrupt-controller;
			#interrupt-cells = <2>;
		};
	};

	psci {
		compatible = "arm,psci-1.0";
		method = "smc";
	};

	soc: soc@0 {
		#address-cells = <2>;
		#size-cells = <2>;
		ranges = <0 0 0 0 0x10 0>;
		dma-ranges = <0 0 0 0 0x10 0>;
		compatible = "simple-bus";

		gcc: clock-controller@100000 {
			compatible = "qcom,gcc-sc7180";
			reg = <0 0x00100000 0 0x1f0000>;
			clocks = <&rpmhcc RPMH_CXO_CLK>,
				 <&rpmhcc RPMH_CXO_CLK_A>,
				 <&sleep_clk>;
			clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk";
			#clock-cells = <1>;
			#reset-cells = <1>;
			#power-domain-cells = <1>;
		};

		qfprom: efuse@784000 {
			compatible = "qcom,sc7180-qfprom", "qcom,qfprom";
			reg = <0 0x00784000 0 0x8ff>,
			      <0 0x00780000 0 0x7a0>,
			      <0 0x00782000 0 0x100>,
			      <0 0x00786000 0 0x1fff>;

			clocks = <&gcc GCC_SEC_CTRL_CLK_SRC>;
			clock-names = "core";
			#address-cells = <1>;
			#size-cells = <1>;

			qusb2p_hstx_trim: hstx-trim-primary@25b {
				reg = <0x25b 0x1>;
				bits = <1 3>;
			};

			gpu_speed_bin: gpu_speed_bin@1d2 {
				reg = <0x1d2 0x2>;
				bits = <5 8>;
			};
		};

		sdhc_1: sdhci@7c4000 {
			compatible = "qcom,sc7180-sdhci", "qcom,sdhci-msm-v5";
			reg = <0 0x7c4000 0 0x1000>,
				<0 0x07c5000 0 0x1000>;
			reg-names = "hc", "cqhci";

			iommus = <&apps_smmu 0x60 0x0>;
			interrupts = <GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH>,
					<GIC_SPI 644 IRQ_TYPE_LEVEL_HIGH>;
			interrupt-names = "hc_irq", "pwr_irq";

			clocks = <&gcc GCC_SDCC1_APPS_CLK>,
					<&gcc GCC_SDCC1_AHB_CLK>;
			clock-names = "core", "iface";
			interconnects = <&aggre1_noc MASTER_EMMC 0 &mc_virt SLAVE_EBI1 0>,
					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_EMMC_CFG 0>;
			interconnect-names = "sdhc-ddr","cpu-sdhc";
			power-domains = <&rpmhpd SC7180_CX>;
			operating-points-v2 = <&sdhc1_opp_table>;

			bus-width = <8>;
			non-removable;
			supports-cqe;

			mmc-ddr-1_8v;
			mmc-hs200-1_8v;
			mmc-hs400-1_8v;
			mmc-hs400-enhanced-strobe;

			status = "disabled";

			sdhc1_opp_table: sdhc1-opp-table {
				compatible = "operating-points-v2";

				opp-100000000 {
					opp-hz = /bits/ 64 <100000000>;
					required-opps = <&rpmhpd_opp_low_svs>;
					opp-peak-kBps = <100000 100000>;
					opp-avg-kBps = <100000 50000>;
				};

				opp-384000000 {
					opp-hz = /bits/ 64 <384000000>;
					required-opps = <&rpmhpd_opp_svs_l1>;
					opp-peak-kBps = <600000 900000>;
					opp-avg-kBps = <261438 300000>;
				};
			};
		};

		qup_opp_table: qup-opp-table {
			compatible = "operating-points-v2";

			opp-75000000 {
				opp-hz = /bits/ 64 <75000000>;
				required-opps = <&rpmhpd_opp_low_svs>;
			};

			opp-100000000 {
				opp-hz = /bits/ 64 <100000000>;
				required-opps = <&rpmhpd_opp_svs>;
			};

			opp-128000000 {
				opp-hz = /bits/ 64 <128000000>;
				required-opps = <&rpmhpd_opp_nom>;
			};
		};

		qupv3_id_0: geniqup@8c0000 {
			compatible = "qcom,geni-se-qup";
			reg = <0 0x008c0000 0 0x6000>;
			clock-names = "m-ahb", "s-ahb";
			clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
				 <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
			#address-cells = <2>;
			#size-cells = <2>;
			ranges;
			iommus = <&apps_smmu 0x43 0x0>;
			status = "disabled";

			i2c0: i2c@880000 {
				compatible = "qcom,geni-i2c";
				reg = <0 0x00880000 0 0x4000>;
				clock-names = "se";
				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
				pinctrl-names = "default";
				pinctrl-0 = <&qup_i2c0_default>;
				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
				#address-cells = <1>;
				#size-cells = <0>;
				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
				interconnect-names = "qup-core", "qup-config",
							"qup-memory";
				status = "disabled";
			};

			spi0: spi@880000 {
				compatible = "qcom,geni-spi";
				reg = <0 0x00880000 0 0x4000>;
				clock-names = "se";
				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
				pinctrl-names = "default";
				pinctrl-0 = <&qup_spi0_default>;
				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
				#address-cells = <1>;
				#size-cells = <0>;
				power-domains = <&rpmhpd SC7180_CX>;
				operating-points-v2 = <&qup_opp_table>;
				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>;
				interconnect-names = "qup-core", "qup-config";
				status = "disabled";
			};

			uart0: serial@880000 {
				compatible = "qcom,geni-uart";
				reg = <0 0x00880000 0 0x4000>;
				clock-names = "se";
				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
				pinctrl-names = "default";
				pinctrl-0 = <&qup_uart0_default>;
				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
				power-domains = <&rpmhpd SC7180_CX>;
				operating-points-v2 = <&qup_opp_table>;
				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>;
				interconnect-names = "qup-core", "qup-config";
				status = "disabled";
			};

			i2c1: i2c@884000 {
				compatible = "qcom,geni-i2c";
				reg = <0 0x00884000 0 0x4000>;
				clock-names = "se";
				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
				pinctrl-names = "default";
				pinctrl-0 = <&qup_i2c1_default>;
				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
				#address-cells = <1>;
				#size-cells = <0>;
				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
				interconnect-names = "qup-core", "qup-config",
							"qup-memory";
				status = "disabled";
			};

			spi1: spi@884000 {
				compatible = "qcom,geni-spi";
				reg = <0 0x00884000 0 0x4000>;
				clock-names = "se";
				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
				pinctrl-names = "default";
				pinctrl-0 = <&qup_spi1_default>;
				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
				#address-cells = <1>;
				#size-cells = <0>;
				power-domains = <&rpmhpd SC7180_CX>;
				operating-points-v2 = <&qup_opp_table>;
				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>;
				interconnect-names = "qup-core", "qup-config";
				status = "disabled";
			};

			uart1: serial@884000 {
				compatible = "qcom,geni-uart";
				reg = <0 0x00884000 0 0x4000>;
				clock-names = "se";
				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
				pinctrl-names = "default";
				pinctrl-0 = <&qup_uart1_default>;
				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
				power-domains = <&rpmhpd SC7180_CX>;
				operating-points-v2 = <&qup_opp_table>;
				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>;
				interconnect-names = "qup-core", "qup-config";
				status = "disabled";
			};

			i2c2: i2c@888000 {
				compatible = "qcom,geni-i2c";
				reg = <0 0x00888000 0 0x4000>;
				clock-names = "se";
				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
				pinctrl-names = "default";
				pinctrl-0 = <&qup_i2c2_default>;
				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
				#address-cells = <1>;
				#size-cells = <0>;
				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
				interconnect-names = "qup-core", "qup-config",
							"qup-memory";
				status = "disabled";
			};

			uart2: serial@888000 {
				compatible = "qcom,geni-uart";
				reg = <0 0x00888000 0 0x4000>;
				clock-names = "se";
				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
				pinctrl-names = "default";
				pinctrl-0 = <&qup_uart2_default>;
				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
				power-domains = <&rpmhpd SC7180_CX>;
				operating-points-v2 = <&qup_opp_table>;
				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>;
				interconnect-names = "qup-core", "qup-config";
				status = "disabled";
			};

			i2c3: i2c@88c000 {
				compatible = "qcom,geni-i2c";
				reg = <0 0x0088c000 0 0x4000>;
				clock-names = "se";
				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
				pinctrl-names = "default";
				pinctrl-0 = <&qup_i2c3_default>;
				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
				#address-cells = <1>;
				#size-cells = <0>;
				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
				interconnect-names = "qup-core", "qup-config",
							"qup-memory";
				status = "disabled";
			};

			spi3: spi@88c000 {
				compatible = "qcom,geni-spi";
				reg = <0 0x0088c000 0 0x4000>;
				clock-names = "se";
				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
				pinctrl-names = "default";
				pinctrl-0 = <&qup_spi3_default>;
				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
				#address-cells = <1>;
				#size-cells = <0>;
				power-domains = <&rpmhpd SC7180_CX>;
				operating-points-v2 = <&qup_opp_table>;
				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>;
				interconnect-names = "qup-core", "qup-config";
				status = "disabled";
			};

			uart3: serial@88c000 {
				compatible = "qcom,geni-uart";
				reg = <0 0x0088c000 0 0x4000>;
				clock-names = "se";
				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
				pinctrl-names = "default";
				pinctrl-0 = <&qup_uart3_default>;
				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
				power-domains = <&rpmhpd SC7180_CX>;
				operating-points-v2 = <&qup_opp_table>;
				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>;
				interconnect-names = "qup-core", "qup-config";
				status = "disabled";
			};

			i2c4: i2c@890000 {
				compatible = "qcom,geni-i2c";
				reg = <0 0x00890000 0 0x4000>;
				clock-names = "se";
				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
				pinctrl-names = "default";
				pinctrl-0 = <&qup_i2c4_default>;
				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
				#address-cells = <1>;
				#size-cells = <0>;
				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
				interconnect-names = "qup-core", "qup-config",
							"qup-memory";
				status = "disabled";
			};

			uart4: serial@890000 {
				compatible = "qcom,geni-uart";
				reg = <0 0x00890000 0 0x4000>;
				clock-names = "se";
				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
				pinctrl-names = "default";
				pinctrl-0 = <&qup_uart4_default>;
				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
				power-domains = <&rpmhpd SC7180_CX>;
				operating-points-v2 = <&qup_opp_table>;
				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>;
				interconnect-names = "qup-core", "qup-config";
				status = "disabled";
			};

			i2c5: i2c@894000 {
				compatible = "qcom,geni-i2c";
				reg = <0 0x00894000 0 0x4000>;
				clock-names = "se";
				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
				pinctrl-names = "default";
				pinctrl-0 = <&qup_i2c5_default>;
				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
				#address-cells = <1>;
				#size-cells = <0>;
				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
				interconnect-names = "qup-core", "qup-config",
							"qup-memory";
				status = "disabled";
			};

			spi5: spi@894000 {
				compatible = "qcom,geni-spi";
				reg = <0 0x00894000 0 0x4000>;
				clock-names = "se";
				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
				pinctrl-names = "default";
				pinctrl-0 = <&qup_spi5_default>;
				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
				#address-cells = <1>;
				#size-cells = <0>;
				power-domains = <&rpmhpd SC7180_CX>;
				operating-points-v2 = <&qup_opp_table>;
				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>;
				interconnect-names = "qup-core", "qup-config";
				status = "disabled";
			};

			uart5: serial@894000 {
				compatible = "qcom,geni-uart";
				reg = <0 0x00894000 0 0x4000>;
				clock-names = "se";
				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
				pinctrl-names = "default";
				pinctrl-0 = <&qup_uart5_default>;
				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
				power-domains = <&rpmhpd SC7180_CX>;
				operating-points-v2 = <&qup_opp_table>;
				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>;
				interconnect-names = "qup-core", "qup-config";
				status = "disabled";
			};
		};

		qupv3_id_1: geniqup@ac0000 {
			compatible = "qcom,geni-se-qup";
			reg = <0 0x00ac0000 0 0x6000>;
			clock-names = "m-ahb", "s-ahb";
			clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
				 <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
			#address-cells = <2>;
			#size-cells = <2>;
			ranges;
			iommus = <&apps_smmu 0x4c3 0x0>;
			status = "disabled";

			i2c6: i2c@a80000 {
				compatible = "qcom,geni-i2c";
				reg = <0 0x00a80000 0 0x4000>;
				clock-names = "se";
				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
				pinctrl-names = "default";
				pinctrl-0 = <&qup_i2c6_default>;
				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
				#address-cells = <1>;
				#size-cells = <0>;
				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
				interconnect-names = "qup-core", "qup-config",
							"qup-memory";
				status = "disabled";
			};

			spi6: spi@a80000 {
				compatible = "qcom,geni-spi";
				reg = <0 0x00a80000 0 0x4000>;
				clock-names = "se";
				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
				pinctrl-names = "default";
				pinctrl-0 = <&qup_spi6_default>;
				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
				#address-cells = <1>;
				#size-cells = <0>;
				power-domains = <&rpmhpd SC7180_CX>;
				operating-points-v2 = <&qup_opp_table>;
				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>;
				interconnect-names = "qup-core", "qup-config";
				status = "disabled";
			};

			uart6: serial@a80000 {
				compatible = "qcom,geni-uart";
				reg = <0 0x00a80000 0 0x4000>;
				clock-names = "se";
				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
				pinctrl-names = "default";
				pinctrl-0 = <&qup_uart6_default>;
				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
				power-domains = <&rpmhpd SC7180_CX>;
				operating-points-v2 = <&qup_opp_table>;
				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>;
				interconnect-names = "qup-core", "qup-config";
				status = "disabled";
			};

			i2c7: i2c@a84000 {
				compatible = "qcom,geni-i2c";
				reg = <0 0x00a84000 0 0x4000>;
				clock-names = "se";
				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
				pinctrl-names = "default";
				pinctrl-0 = <&qup_i2c7_default>;
				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
				#address-cells = <1>;
				#size-cells = <0>;
				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
				interconnect-names = "qup-core", "qup-config",
							"qup-memory";
				status = "disabled";
			};

			uart7: serial@a84000 {
				compatible = "qcom,geni-uart";
				reg = <0 0x00a84000 0 0x4000>;
				clock-names = "se";
				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
				pinctrl-names = "default";
				pinctrl-0 = <&qup_uart7_default>;
				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
				power-domains = <&rpmhpd SC7180_CX>;
				operating-points-v2 = <&qup_opp_table>;
				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>;
				interconnect-names = "qup-core", "qup-config";
				status = "disabled";
			};

			i2c8: i2c@a88000 {
				compatible = "qcom,geni-i2c";
				reg = <0 0x00a88000 0 0x4000>;
				clock-names = "se";
				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
				pinctrl-names = "default";
				pinctrl-0 = <&qup_i2c8_default>;
				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
				#address-cells = <1>;
				#size-cells = <0>;
				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
				interconnect-names = "qup-core", "qup-config",
							"qup-memory";
				status = "disabled";
			};

			spi8: spi@a88000 {
				compatible = "qcom,geni-spi";
				reg = <0 0x00a88000 0 0x4000>;
				clock-names = "se";
				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
				pinctrl-names = "default";
				pinctrl-0 = <&qup_spi8_default>;
				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
				#address-cells = <1>;
				#size-cells = <0>;
				power-domains = <&rpmhpd SC7180_CX>;
				operating-points-v2 = <&qup_opp_table>;
				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>;
				interconnect-names = "qup-core", "qup-config";
				status = "disabled";
			};

			uart8: serial@a88000 {
				compatible = "qcom,geni-debug-uart";
				reg = <0 0x00a88000 0 0x4000>;
				clock-names = "se";
				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
				pinctrl-names = "default";
				pinctrl-0 = <&qup_uart8_default>;
				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
				power-domains = <&rpmhpd SC7180_CX>;
				operating-points-v2 = <&qup_opp_table>;
				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>;
				interconnect-names = "qup-core", "qup-config";
				status = "disabled";
			};

			i2c9: i2c@a8c000 {
				compatible = "qcom,geni-i2c";
				reg = <0 0x00a8c000 0 0x4000>;
				clock-names = "se";
				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
				pinctrl-names = "default";
				pinctrl-0 = <&qup_i2c9_default>;
				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
				#address-cells = <1>;
				#size-cells = <0>;
				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
				interconnect-names = "qup-core", "qup-config",
							"qup-memory";
				status = "disabled";
			};

			uart9: serial@a8c000 {
				compatible = "qcom,geni-uart";
				reg = <0 0x00a8c000 0 0x4000>;
				clock-names = "se";
				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
				pinctrl-names = "default";
				pinctrl-0 = <&qup_uart9_default>;
				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
				power-domains = <&rpmhpd SC7180_CX>;
				operating-points-v2 = <&qup_opp_table>;
				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>;
				interconnect-names = "qup-core", "qup-config";
				status = "disabled";
			};

			i2c10: i2c@a90000 {
				compatible = "qcom,geni-i2c";
				reg = <0 0x00a90000 0 0x4000>;
				clock-names = "se";
				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
				pinctrl-names = "default";
				pinctrl-0 = <&qup_i2c10_default>;
				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
				#address-cells = <1>;
				#size-cells = <0>;
				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
				interconnect-names = "qup-core", "qup-config",
							"qup-memory";
				status = "disabled";
			};

			spi10: spi@a90000 {
				compatible = "qcom,geni-spi";
				reg = <0 0x00a90000 0 0x4000>;
				clock-names = "se";
				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
				pinctrl-names = "default";
				pinctrl-0 = <&qup_spi10_default>;
				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
				#address-cells = <1>;
				#size-cells = <0>;
				power-domains = <&rpmhpd SC7180_CX>;
				operating-points-v2 = <&qup_opp_table>;
				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>;
				interconnect-names = "qup-core", "qup-config";
				status = "disabled";
			};

			uart10: serial@a90000 {
				compatible = "qcom,geni-uart";
				reg = <0 0x00a90000 0 0x4000>;
				clock-names = "se";
				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
				pinctrl-names = "default";
				pinctrl-0 = <&qup_uart10_default>;
				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
				power-domains = <&rpmhpd SC7180_CX>;
				operating-points-v2 = <&qup_opp_table>;
				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>;
				interconnect-names = "qup-core", "qup-config";
				status = "disabled";
			};

			i2c11: i2c@a94000 {
				compatible = "qcom,geni-i2c";
				reg = <0 0x00a94000 0 0x4000>;
				clock-names = "se";
				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
				pinctrl-names = "default";
				pinctrl-0 = <&qup_i2c11_default>;
				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
				#address-cells = <1>;
				#size-cells = <0>;
				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
				interconnect-names = "qup-core", "qup-config",
							"qup-memory";
				status = "disabled";
			};

			spi11: spi@a94000 {
				compatible = "qcom,geni-spi";
				reg = <0 0x00a94000 0 0x4000>;
				clock-names = "se";
				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
				pinctrl-names = "default";
				pinctrl-0 = <&qup_spi11_default>;
				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
				#address-cells = <1>;
				#size-cells = <0>;
				power-domains = <&rpmhpd SC7180_CX>;
				operating-points-v2 = <&qup_opp_table>;
				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>;
				interconnect-names = "qup-core", "qup-config";
				status = "disabled";
			};

			uart11: serial@a94000 {
				compatible = "qcom,geni-uart";
				reg = <0 0x00a94000 0 0x4000>;
				clock-names = "se";
				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
				pinctrl-names = "default";
				pinctrl-0 = <&qup_uart11_default>;
				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
				power-domains = <&rpmhpd SC7180_CX>;
				operating-points-v2 = <&qup_opp_table>;
				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>;
				interconnect-names = "qup-core", "qup-config";
				status = "disabled";
			};
		};

		config_noc: interconnect@1500000 {
			compatible = "qcom,sc7180-config-noc";
			reg = <0 0x01500000 0 0x28000>;
			#interconnect-cells = <2>;
			qcom,bcm-voters = <&apps_bcm_voter>;
		};

		system_noc: interconnect@1620000 {
			compatible = "qcom,sc7180-system-noc";
			reg = <0 0x01620000 0 0x17080>;
			#interconnect-cells = <2>;
			qcom,bcm-voters = <&apps_bcm_voter>;
		};

		mc_virt: interconnect@1638000 {
			compatible = "qcom,sc7180-mc-virt";
			reg = <0 0x01638000 0 0x1000>;
			#interconnect-cells = <2>;
			qcom,bcm-voters = <&apps_bcm_voter>;
		};

		qup_virt: interconnect@1650000 {
			compatible = "qcom,sc7180-qup-virt";
			reg = <0 0x01650000 0 0x1000>;
			#interconnect-cells = <2>;
			qcom,bcm-voters = <&apps_bcm_voter>;
		};

		aggre1_noc: interconnect@16e0000 {
			compatible = "qcom,sc7180-aggre1-noc";
			reg = <0 0x016e0000 0 0x15080>;
			#interconnect-cells = <2>;
			qcom,bcm-voters = <&apps_bcm_voter>;
		};

		aggre2_noc: interconnect@1705000 {
			compatible = "qcom,sc7180-aggre2-noc";
			reg = <0 0x01705000 0 0x9000>;
			#interconnect-cells = <2>;
			qcom,bcm-voters = <&apps_bcm_voter>;
		};

		compute_noc: interconnect@170e000 {
			compatible = "qcom,sc7180-compute-noc";
			reg = <0 0x0170e000 0 0x6000>;
			#interconnect-cells = <2>;
			qcom,bcm-voters = <&apps_bcm_voter>;
		};

		mmss_noc: interconnect@1740000 {
			compatible = "qcom,sc7180-mmss-noc";
			reg = <0 0x01740000 0 0x1c100>;
			#interconnect-cells = <2>;
			qcom,bcm-voters = <&apps_bcm_voter>;
		};

		ipa_virt: interconnect@1e00000 {
			compatible = "qcom,sc7180-ipa-virt";
			reg = <0 0x01e00000 0 0x1000>;
			#interconnect-cells = <2>;
			qcom,bcm-voters = <&apps_bcm_voter>;
		};

		ipa: ipa@1e40000 {
			compatible = "qcom,sc7180-ipa";

			iommus = <&apps_smmu 0x440 0x0>,
				 <&apps_smmu 0x442 0x0>;
			reg = <0 0x1e40000 0 0x7000>,
			      <0 0x1e47000 0 0x2000>,
			      <0 0x1e04000 0 0x2c000>;
			reg-names = "ipa-reg",
				    "ipa-shared",
				    "gsi";

			interrupts-extended = <&intc GIC_SPI 311 IRQ_TYPE_EDGE_RISING>,
					      <&intc GIC_SPI 432 IRQ_TYPE_LEVEL_HIGH>,
					      <&ipa_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
					      <&ipa_smp2p_in 1 IRQ_TYPE_EDGE_RISING>;
			interrupt-names = "ipa",
					  "gsi",
					  "ipa-clock-query",
					  "ipa-setup-ready";

			clocks = <&rpmhcc RPMH_IPA_CLK>;
			clock-names = "core";

			interconnects = <&aggre2_noc MASTER_IPA 0 &mc_virt SLAVE_EBI1 0>,
					<&aggre2_noc MASTER_IPA 0 &system_noc SLAVE_IMEM 0>,
					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_IPA_CFG 0>;
			interconnect-names = "memory",
					     "imem",
					     "config";

			qcom,smem-states = <&ipa_smp2p_out 0>,
					   <&ipa_smp2p_out 1>;
			qcom,smem-state-names = "ipa-clock-enabled-valid",
						"ipa-clock-enabled";

			status = "disabled";
		};

		tcsr_mutex_regs: syscon@1f40000 {
			compatible = "syscon";
			reg = <0 0x01f40000 0 0x40000>;
		};

		tcsr_regs: syscon@1fc0000 {
			compatible = "syscon";
			reg = <0 0x01fc0000 0 0x40000>;
		};

		tlmm: pinctrl@3500000 {
			compatible = "qcom,sc7180-pinctrl";
			reg = <0 0x03500000 0 0x300000>,
			      <0 0x03900000 0 0x300000>,
			      <0 0x03d00000 0 0x300000>;
			reg-names = "west", "north", "south";
			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
			gpio-controller;
			#gpio-cells = <2>;
			interrupt-controller;
			#interrupt-cells = <2>;
			gpio-ranges = <&tlmm 0 0 120>;
			wakeup-parent = <&pdc>;

			dp_hot_plug_det: dp-hot-plug-det {
				pinmux {
					pins = "gpio117";
					function = "dp_hot";
				};
			};

			qspi_clk: qspi-clk {
				pinmux {
					pins = "gpio63";
					function = "qspi_clk";
				};
			};

			qspi_cs0: qspi-cs0 {
				pinmux {
					pins = "gpio68";
					function = "qspi_cs";
				};
			};

			qspi_cs1: qspi-cs1 {
				pinmux {
					pins = "gpio72";
					function = "qspi_cs";
				};
			};

			qspi_data01: qspi-data01 {
				pinmux-data {
					pins = "gpio64", "gpio65";
					function = "qspi_data";
				};
			};

			qspi_data12: qspi-data12 {
				pinmux-data {
					pins = "gpio66", "gpio67";
					function = "qspi_data";
				};
			};

			qup_i2c0_default: qup-i2c0-default {
				pinmux {
					pins = "gpio34", "gpio35";
					function = "qup00";
				};
			};

			qup_i2c1_default: qup-i2c1-default {
				pinmux {
					pins = "gpio0", "gpio1";
					function = "qup01";
				};
			};

			qup_i2c2_default: qup-i2c2-default {
				pinmux {
					pins = "gpio15", "gpio16";
					function = "qup02_i2c";
				};
			};

			qup_i2c3_default: qup-i2c3-default {
				pinmux {
					pins = "gpio38", "gpio39";
					function = "qup03";
				};
			};

			qup_i2c4_default: qup-i2c4-default {
				pinmux {
					pins = "gpio115", "gpio116";
					function = "qup04_i2c";
				};
			};

			qup_i2c5_default: qup-i2c5-default {
				pinmux {
					pins = "gpio25", "gpio26";
					function = "qup05";
				};
			};

			qup_i2c6_default: qup-i2c6-default {
				pinmux {
					pins = "gpio59", "gpio60";
					function = "qup10";
				};
			};

			qup_i2c7_default: qup-i2c7-default {
				pinmux {
					pins = "gpio6", "gpio7";
					function = "qup11_i2c";
				};
			};

			qup_i2c8_default: qup-i2c8-default {
				pinmux {
					pins = "gpio42", "gpio43";
					function = "qup12";
				};
			};

			qup_i2c9_default: qup-i2c9-default {
				pinmux {
					pins = "gpio46", "gpio47";
					function = "qup13_i2c";
				};
			};

			qup_i2c10_default: qup-i2c10-default {
				pinmux {
					pins = "gpio86", "gpio87";
					function = "qup14";
				};
			};

			qup_i2c11_default: qup-i2c11-default {
				pinmux {
					pins = "gpio53", "gpio54";
					function = "qup15";
				};
			};

			qup_spi0_default: qup-spi0-default {
				pinmux {
					pins = "gpio34", "gpio35",
					       "gpio36", "gpio37";
					function = "qup00";
				};
			};

			qup_spi0_cs_gpio: qup-spi0-cs-gpio {
				pinmux {
					pins = "gpio34", "gpio35",
					       "gpio36";
					function = "qup00";
				};

				pinmux-cs {
					pins = "gpio37";
					function = "gpio";
				};
			};

			qup_spi1_default: qup-spi1-default {
				pinmux {
					pins = "gpio0", "gpio1",
					       "gpio2", "gpio3";
					function = "qup01";
				};
			};

			qup_spi1_cs_gpio: qup-spi1-cs-gpio {
				pinmux {
					pins = "gpio0", "gpio1",
					       "gpio2";
					function = "qup01";
				};

				pinmux-cs {
					pins = "gpio3";
					function = "gpio";
				};
			};

			qup_spi3_default: qup-spi3-default {
				pinmux {
					pins = "gpio38", "gpio39",
					       "gpio40", "gpio41";
					function = "qup03";
				};
			};

			qup_spi3_cs_gpio: qup-spi3-cs-gpio {
				pinmux {
					pins = "gpio38", "gpio39",
					       "gpio40";
					function = "qup03";
				};

				pinmux-cs {
					pins = "gpio41";
					function = "gpio";
				};
			};

			qup_spi5_default: qup-spi5-default {
				pinmux {
					pins = "gpio25", "gpio26",
					       "gpio27", "gpio28";
					function = "qup05";
				};
			};

			qup_spi5_cs_gpio: qup-spi5-cs-gpio {
				pinmux {
					pins = "gpio25", "gpio26",
					       "gpio27";
					function = "qup05";
				};

				pinmux-cs {
					pins = "gpio28";
					function = "gpio";
				};
			};

			qup_spi6_default: qup-spi6-default {
				pinmux {
					pins = "gpio59", "gpio60",
					       "gpio61", "gpio62";
					function = "qup10";
				};
			};

			qup_spi6_cs_gpio: qup-spi6-cs-gpio {
				pinmux {
					pins = "gpio59", "gpio60",
					       "gpio61";
					function = "qup10";
				};

				pinmux-cs {
					pins = "gpio62";
					function = "gpio";
				};
			};

			qup_spi8_default: qup-spi8-default {
				pinmux {
					pins = "gpio42", "gpio43",
					       "gpio44", "gpio45";
					function = "qup12";
				};
			};

			qup_spi8_cs_gpio: qup-spi8-cs-gpio {
				pinmux {
					pins = "gpio42", "gpio43",
					       "gpio44";
					function = "qup12";
				};

				pinmux-cs {
					pins = "gpio45";
					function = "gpio";
				};
			};

			qup_spi10_default: qup-spi10-default {
				pinmux {
					pins = "gpio86", "gpio87",
					       "gpio88", "gpio89";
					function = "qup14";
				};
			};

			qup_spi10_cs_gpio: qup-spi10-cs-gpio {
				pinmux {
					pins = "gpio86", "gpio87",
					       "gpio88";
					function = "qup14";
				};

				pinmux-cs {
					pins = "gpio89";
					function = "gpio";
				};
			};

			qup_spi11_default: qup-spi11-default {
				pinmux {
					pins = "gpio53", "gpio54",
					       "gpio55", "gpio56";
					function = "qup15";
				};
			};

			qup_spi11_cs_gpio: qup-spi11-cs-gpio {
				pinmux {
					pins = "gpio53", "gpio54",
					       "gpio55";
					function = "qup15";
				};

				pinmux-cs {
					pins = "gpio56";
					function = "gpio";
				};
			};

			qup_uart0_default: qup-uart0-default {
				pinmux {
					pins = "gpio34", "gpio35",
					       "gpio36", "gpio37";
					function = "qup00";
				};
			};

			qup_uart1_default: qup-uart1-default {
				pinmux {
					pins = "gpio0", "gpio1",
					       "gpio2", "gpio3";
					function = "qup01";
				};
			};

			qup_uart2_default: qup-uart2-default {
				pinmux {
					pins = "gpio15", "gpio16";
					function = "qup02_uart";
				};
			};

			qup_uart3_default: qup-uart3-default {
				pinmux {
					pins = "gpio38", "gpio39",
					       "gpio40", "gpio41";
					function = "qup03";
				};
			};

			qup_uart4_default: qup-uart4-default {
				pinmux {
					pins = "gpio115", "gpio116";
					function = "qup04_uart";
				};
			};

			qup_uart5_default: qup-uart5-default {
				pinmux {
					pins = "gpio25", "gpio26",
					       "gpio27", "gpio28";
					function = "qup05";
				};
			};

			qup_uart6_default: qup-uart6-default {
				pinmux {
					pins = "gpio59", "gpio60",
					       "gpio61", "gpio62";
					function = "qup10";
				};
			};

			qup_uart7_default: qup-uart7-default {
				pinmux {
					pins = "gpio6", "gpio7";
					function = "qup11_uart";
				};
			};

			qup_uart8_default: qup-uart8-default {
				pinmux {
					pins = "gpio44", "gpio45";
					function = "qup12";
				};
			};

			qup_uart9_default: qup-uart9-default {
				pinmux {
					pins = "gpio46", "gpio47";
					function = "qup13_uart";
				};
			};

			qup_uart10_default: qup-uart10-default {
				pinmux {
					pins = "gpio86", "gpio87",
					       "gpio88", "gpio89";
					function = "qup14";
				};
			};

			qup_uart11_default: qup-uart11-default {
				pinmux {
					pins = "gpio53", "gpio54",
					       "gpio55", "gpio56";
					function = "qup15";
				};
			};

			sec_mi2s_active: sec-mi2s-active {
				pinmux {
					pins = "gpio49", "gpio50", "gpio51";
					function = "mi2s_1";
				};
			};

			pri_mi2s_active: pri-mi2s-active {
				pinmux {
					pins = "gpio53", "gpio54", "gpio55", "gpio56";
					function = "mi2s_0";
				};
			};

			pri_mi2s_mclk_active: pri-mi2s-mclk-active {
				pinmux {
					pins = "gpio57";
					function = "lpass_ext";
				};
			};

			sdc1_on: sdc1-on {
				pinconf-clk {
					pins = "sdc1_clk";
					bias-disable;
					drive-strength = <16>;
				};

				pinconf-cmd {
					pins = "sdc1_cmd";
					bias-pull-up;
					drive-strength = <10>;
				};

				pinconf-data {
					pins = "sdc1_data";
					bias-pull-up;
					drive-strength = <10>;
				};

				pinconf-rclk {
					pins = "sdc1_rclk";
					bias-pull-down;
				};
			};

			sdc1_off: sdc1-off {
				pinconf-clk {
					pins = "sdc1_clk";
					bias-disable;
					drive-strength = <2>;
				};

				pinconf-cmd {
					pins = "sdc1_cmd";
					bias-pull-up;
					drive-strength = <2>;
				};

				pinconf-data {
					pins = "sdc1_data";
					bias-pull-up;
					drive-strength = <2>;
				};

				pinconf-rclk {
					pins = "sdc1_rclk";
					bias-pull-down;
				};
			};

			sdc2_on: sdc2-on {
				pinconf-clk {
					pins = "sdc2_clk";
					bias-disable;
					drive-strength = <16>;
				};

				pinconf-cmd {
					pins = "sdc2_cmd";
					bias-pull-up;
					drive-strength = <10>;
				};

				pinconf-data {
					pins = "sdc2_data";
					bias-pull-up;
					drive-strength = <10>;
				};

				pinconf-sd-cd {
					pins = "gpio69";
					bias-pull-up;
					drive-strength = <2>;
				};
			};

			sdc2_off: sdc2-off {
				pinconf-clk {
					pins = "sdc2_clk";
					bias-disable;
					drive-strength = <2>;
				};

				pinconf-cmd {
					pins = "sdc2_cmd";
					bias-pull-up;
					drive-strength = <2>;
				};

				pinconf-data {
					pins = "sdc2_data";
					bias-pull-up;
					drive-strength = <2>;
				};

				pinconf-sd-cd {
					pins = "gpio69";
					bias-disable;
					drive-strength = <2>;
				};
			};
		};

		remoteproc_mpss: remoteproc@4080000 {
			compatible = "qcom,sc7180-mpss-pas";
			reg = <0 0x04080000 0 0x4040>, <0 0x04180000 0 0x48>;
			reg-names = "qdsp6", "rmb";

			interrupts-extended = <&intc GIC_SPI 266 IRQ_TYPE_EDGE_RISING>,
					      <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
					      <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
					      <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
					      <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
					      <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
			interrupt-names = "wdog", "fatal", "ready", "handover",
					  "stop-ack", "shutdown-ack";

			clocks = <&gcc GCC_MSS_CFG_AHB_CLK>,
				 <&gcc GCC_MSS_Q6_MEMNOC_AXI_CLK>,
				 <&gcc GCC_MSS_NAV_AXI_CLK>,
				 <&gcc GCC_MSS_SNOC_AXI_CLK>,
				 <&gcc GCC_MSS_MFAB_AXIS_CLK>,
				 <&rpmhcc RPMH_CXO_CLK>;
			clock-names = "iface", "bus", "nav", "snoc_axi",
				      "mnoc_axi", "xo";

			power-domains = <&aoss_qmp AOSS_QMP_LS_MODEM>,
					<&rpmhpd SC7180_CX>,
					<&rpmhpd SC7180_MX>,
					<&rpmhpd SC7180_MSS>;
			power-domain-names = "load_state", "cx", "mx", "mss";

			memory-region = <&mpss_mem>;

			qcom,smem-states = <&modem_smp2p_out 0>;
			qcom,smem-state-names = "stop";

			resets = <&aoss_reset AOSS_CC_MSS_RESTART>,
				 <&pdc_reset PDC_MODEM_SYNC_RESET>;
			reset-names = "mss_restart", "pdc_reset";

			qcom,halt-regs = <&tcsr_mutex_regs 0x23000 0x25000 0x24000>;
			qcom,spare-regs = <&tcsr_regs 0xb3e4>;

			status = "disabled";

			glink-edge {
				interrupts = <GIC_SPI 449 IRQ_TYPE_EDGE_RISING>;
				label = "modem";
				qcom,remote-pid = <1>;
				mboxes = <&apss_shared 12>;
			};
		};

		gpu: gpu@5000000 {
			compatible = "qcom,adreno-618.0", "qcom,adreno";
			#stream-id-cells = <16>;
			reg = <0 0x05000000 0 0x40000>, <0 0x0509e000 0 0x1000>,
				<0 0x05061000 0 0x800>;
			reg-names = "kgsl_3d0_reg_memory", "cx_mem", "cx_dbgc";
			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
			iommus = <&adreno_smmu 0>;
			operating-points-v2 = <&gpu_opp_table>;
			qcom,gmu = <&gmu>;

			#cooling-cells = <2>;

			nvmem-cells = <&gpu_speed_bin>;
			nvmem-cell-names = "speed_bin";

			interconnects = <&gem_noc MASTER_GFX3D 0 &mc_virt SLAVE_EBI1 0>;
			interconnect-names = "gfx-mem";

			gpu_opp_table: opp-table {
				compatible = "operating-points-v2";

				opp-825000000 {
					opp-hz = /bits/ 64 <825000000>;
					opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
					opp-peak-kBps = <8532000>;
					opp-supported-hw = <0x04>;
				};

				opp-800000000 {
					opp-hz = /bits/ 64 <800000000>;
					opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
					opp-peak-kBps = <8532000>;
					opp-supported-hw = <0x07>;
				};

				opp-650000000 {
					opp-hz = /bits/ 64 <650000000>;
					opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
					opp-peak-kBps = <7216000>;
					opp-supported-hw = <0x07>;
				};

				opp-565000000 {
					opp-hz = /bits/ 64 <565000000>;
					opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
					opp-peak-kBps = <5412000>;
					opp-supported-hw = <0x07>;
				};

				opp-430000000 {
					opp-hz = /bits/ 64 <430000000>;
					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
					opp-peak-kBps = <5412000>;
					opp-supported-hw = <0x07>;
				};

				opp-355000000 {
					opp-hz = /bits/ 64 <355000000>;
					opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
					opp-peak-kBps = <3072000>;
					opp-supported-hw = <0x07>;
				};

				opp-267000000 {
					opp-hz = /bits/ 64 <267000000>;
					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
					opp-peak-kBps = <3072000>;
					opp-supported-hw = <0x07>;
				};

				opp-180000000 {
					opp-hz = /bits/ 64 <180000000>;
					opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
					opp-peak-kBps = <1804000>;
					opp-supported-hw = <0x07>;
				};
			};
		};

		adreno_smmu: iommu@5040000 {
			compatible = "qcom,sc7180-smmu-v2", "qcom,adreno-smmu", "qcom,smmu-v2";
			reg = <0 0x05040000 0 0x10000>;
			#iommu-cells = <1>;
			#global-interrupts = <2>;
			interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>,
					<GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>,
					<GIC_SPI 364 IRQ_TYPE_EDGE_RISING>,
					<GIC_SPI 365 IRQ_TYPE_EDGE_RISING>,
					<GIC_SPI 366 IRQ_TYPE_EDGE_RISING>,
					<GIC_SPI 367 IRQ_TYPE_EDGE_RISING>,
					<GIC_SPI 368 IRQ_TYPE_EDGE_RISING>,
					<GIC_SPI 369 IRQ_TYPE_EDGE_RISING>,
					<GIC_SPI 370 IRQ_TYPE_EDGE_RISING>,
					<GIC_SPI 371 IRQ_TYPE_EDGE_RISING>;

			clocks = <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
				<&gcc GCC_GPU_CFG_AHB_CLK>;
			clock-names = "bus", "iface";

			power-domains = <&gpucc CX_GDSC>;
		};

		gmu: gmu@506a000 {
			compatible="qcom,adreno-gmu-618.0", "qcom,adreno-gmu";
			reg = <0 0x0506a000 0 0x31000>, <0 0x0b290000 0 0x10000>,
				<0 0x0b490000 0 0x10000>;
			reg-names = "gmu", "gmu_pdc", "gmu_pdc_seq";
			interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
				   <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
			interrupt-names = "hfi", "gmu";
			clocks = <&gpucc GPU_CC_CX_GMU_CLK>,
			       <&gpucc GPU_CC_CXO_CLK>,
			       <&gcc GCC_DDRSS_GPU_AXI_CLK>,
			       <&gcc GCC_GPU_MEMNOC_GFX_CLK>;
			clock-names = "gmu", "cxo", "axi", "memnoc";
			power-domains = <&gpucc CX_GDSC>, <&gpucc GX_GDSC>;
			power-domain-names = "cx", "gx";
			iommus = <&adreno_smmu 5>;
			operating-points-v2 = <&gmu_opp_table>;

			gmu_opp_table: opp-table {
				compatible = "operating-points-v2";

				opp-200000000 {
					opp-hz = /bits/ 64 <200000000>;
					opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
				};
			};
		};

		gpucc: clock-controller@5090000 {
			compatible = "qcom,sc7180-gpucc";
			reg = <0 0x05090000 0 0x9000>;
			clocks = <&rpmhcc RPMH_CXO_CLK>,
				 <&gcc GCC_GPU_GPLL0_CLK_SRC>,
				 <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
			clock-names = "bi_tcxo",
				      "gcc_gpu_gpll0_clk_src",
				      "gcc_gpu_gpll0_div_clk_src";
			#clock-cells = <1>;
			#reset-cells = <1>;
			#power-domain-cells = <1>;
		};

		stm@6002000 {
			compatible = "arm,coresight-stm", "arm,primecell";
			reg = <0 0x06002000 0 0x1000>,
			      <0 0x16280000 0 0x180000>;
			reg-names = "stm-base", "stm-stimulus-base";

			clocks = <&aoss_qmp>;
			clock-names = "apb_pclk";

			out-ports {
				port {
					stm_out: endpoint {
						remote-endpoint = <&funnel0_in7>;
					};
				};
			};
		};

		funnel@6041000 {
			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
			reg = <0 0x06041000 0 0x1000>;

			clocks = <&aoss_qmp>;
			clock-names = "apb_pclk";

			out-ports {
				port {
					funnel0_out: endpoint {
						remote-endpoint = <&merge_funnel_in0>;
					};
				};
			};

			in-ports {
				#address-cells = <1>;
				#size-cells = <0>;

				port@7 {
					reg = <7>;
					funnel0_in7: endpoint {
						remote-endpoint = <&stm_out>;
					};
				};
			};
		};

		funnel@6042000 {
			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
			reg = <0 0x06042000 0 0x1000>;

			clocks = <&aoss_qmp>;
			clock-names = "apb_pclk";

			out-ports {
				port {
					funnel1_out: endpoint {
						remote-endpoint = <&merge_funnel_in1>;
					};
				};
			};

			in-ports {
				#address-cells = <1>;
				#size-cells = <0>;

				port@4 {
					reg = <4>;
					funnel1_in4: endpoint {
						remote-endpoint = <&apss_merge_funnel_out>;
					};
				};
			};
		};

		funnel@6045000 {
			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
			reg = <0 0x06045000 0 0x1000>;

			clocks = <&aoss_qmp>;
			clock-names = "apb_pclk";

			out-ports {
				port {
					merge_funnel_out: endpoint {
						remote-endpoint = <&swao_funnel_in>;
					};
				};
			};

			in-ports {
				#address-cells = <1>;
				#size-cells = <0>;

				port@0 {
					reg = <0>;
					merge_funnel_in0: endpoint {
						remote-endpoint = <&funnel0_out>;
					};
				};

				port@1 {
					reg = <1>;
					merge_funnel_in1: endpoint {
						remote-endpoint = <&funnel1_out>;
					};
				};
			};
		};

		replicator@6046000 {
			compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
			reg = <0 0x06046000 0 0x1000>;

			clocks = <&aoss_qmp>;
			clock-names = "apb_pclk";

			out-ports {
				port {
					replicator_out: endpoint {
						remote-endpoint = <&etr_in>;
					};
				};
			};

			in-ports {
				port {
					replicator_in: endpoint {
						remote-endpoint = <&swao_replicator_out>;
					};
				};
			};
		};

		etr@6048000 {
			compatible = "arm,coresight-tmc", "arm,primecell";
			reg = <0 0x06048000 0 0x1000>;
			iommus = <&apps_smmu 0x04a0 0x20>;

			clocks = <&aoss_qmp>;
			clock-names = "apb_pclk";
			arm,scatter-gather;

			in-ports {
				port {
					etr_in: endpoint {
						remote-endpoint = <&replicator_out>;
					};
				};
			};
		};

		funnel@6b04000 {
			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
			reg = <0 0x06b04000 0 0x1000>;

			clocks = <&aoss_qmp>;
			clock-names = "apb_pclk";

			out-ports {
				port {
					swao_funnel_out: endpoint {
						remote-endpoint = <&etf_in>;
					};
				};
			};

			in-ports {
				#address-cells = <1>;
				#size-cells = <0>;

				port@7 {
					reg = <7>;
					swao_funnel_in: endpoint {
						remote-endpoint = <&merge_funnel_out>;
					};
				};
			};
		};

		etf@6b05000 {
			compatible = "arm,coresight-tmc", "arm,primecell";
			reg = <0 0x06b05000 0 0x1000>;

			clocks = <&aoss_qmp>;
			clock-names = "apb_pclk";

			out-ports {
				port {
					etf_out: endpoint {
						remote-endpoint = <&swao_replicator_in>;
					};
				};
			};

			in-ports {
				port {
					etf_in: endpoint {
						remote-endpoint = <&swao_funnel_out>;
					};
				};
			};
		};

		replicator@6b06000 {
			compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
			reg = <0 0x06b06000 0 0x1000>;

			clocks = <&aoss_qmp>;
			clock-names = "apb_pclk";
			qcom,replicator-loses-context;

			out-ports {
				port {
					swao_replicator_out: endpoint {
						remote-endpoint = <&replicator_in>;
					};
				};
			};

			in-ports {
				port {
					swao_replicator_in: endpoint {
						remote-endpoint = <&etf_out>;
					};
				};
			};
		};

		etm@7040000 {
			compatible = "arm,coresight-etm4x", "arm,primecell";
			reg = <0 0x07040000 0 0x1000>;

			cpu = <&CPU0>;

			clocks = <&aoss_qmp>;
			clock-names = "apb_pclk";
			arm,coresight-loses-context-with-cpu;
			qcom,skip-power-up;

			out-ports {
				port {
					etm0_out: endpoint {
						remote-endpoint = <&apss_funnel_in0>;
					};
				};
			};
		};

		etm@7140000 {
			compatible = "arm,coresight-etm4x", "arm,primecell";
			reg = <0 0x07140000 0 0x1000>;

			cpu = <&CPU1>;

			clocks = <&aoss_qmp>;
			clock-names = "apb_pclk";
			arm,coresight-loses-context-with-cpu;
			qcom,skip-power-up;

			out-ports {
				port {
					etm1_out: endpoint {
						remote-endpoint = <&apss_funnel_in1>;
					};
				};
			};
		};

		etm@7240000 {
			compatible = "arm,coresight-etm4x", "arm,primecell";
			reg = <0 0x07240000 0 0x1000>;

			cpu = <&CPU2>;

			clocks = <&aoss_qmp>;
			clock-names = "apb_pclk";
			arm,coresight-loses-context-with-cpu;
			qcom,skip-power-up;

			out-ports {
				port {
					etm2_out: endpoint {
						remote-endpoint = <&apss_funnel_in2>;
					};
				};
			};
		};

		etm@7340000 {
			compatible = "arm,coresight-etm4x", "arm,primecell";
			reg = <0 0x07340000 0 0x1000>;

			cpu = <&CPU3>;

			clocks = <&aoss_qmp>;
			clock-names = "apb_pclk";
			arm,coresight-loses-context-with-cpu;
			qcom,skip-power-up;

			out-ports {
				port {
					etm3_out: endpoint {
						remote-endpoint = <&apss_funnel_in3>;
					};
				};
			};
		};

		etm@7440000 {
			compatible = "arm,coresight-etm4x", "arm,primecell";
			reg = <0 0x07440000 0 0x1000>;

			cpu = <&CPU4>;

			clocks = <&aoss_qmp>;
			clock-names = "apb_pclk";
			arm,coresight-loses-context-with-cpu;
			qcom,skip-power-up;

			out-ports {
				port {
					etm4_out: endpoint {
						remote-endpoint = <&apss_funnel_in4>;
					};
				};
			};
		};

		etm@7540000 {
			compatible = "arm,coresight-etm4x", "arm,primecell";
			reg = <0 0x07540000 0 0x1000>;

			cpu = <&CPU5>;

			clocks = <&aoss_qmp>;
			clock-names = "apb_pclk";
			arm,coresight-loses-context-with-cpu;
			qcom,skip-power-up;

			out-ports {
				port {
					etm5_out: endpoint {
						remote-endpoint = <&apss_funnel_in5>;
					};
				};
			};
		};

		etm@7640000 {
			compatible = "arm,coresight-etm4x", "arm,primecell";
			reg = <0 0x07640000 0 0x1000>;

			cpu = <&CPU6>;

			clocks = <&aoss_qmp>;
			clock-names = "apb_pclk";
			arm,coresight-loses-context-with-cpu;
			qcom,skip-power-up;

			out-ports {
				port {
					etm6_out: endpoint {
						remote-endpoint = <&apss_funnel_in6>;
					};
				};
			};
		};

		etm@7740000 {
			compatible = "arm,coresight-etm4x", "arm,primecell";
			reg = <0 0x07740000 0 0x1000>;

			cpu = <&CPU7>;

			clocks = <&aoss_qmp>;
			clock-names = "apb_pclk";
			arm,coresight-loses-context-with-cpu;
			qcom,skip-power-up;

			out-ports {
				port {
					etm7_out: endpoint {
						remote-endpoint = <&apss_funnel_in7>;
					};
				};
			};
		};

		funnel@7800000 { /* APSS Funnel */
			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
			reg = <0 0x07800000 0 0x1000>;

			clocks = <&aoss_qmp>;
			clock-names = "apb_pclk";

			out-ports {
				port {
					apss_funnel_out: endpoint {
						remote-endpoint = <&apss_merge_funnel_in>;
					};
				};
			};

			in-ports {
				#address-cells = <1>;
				#size-cells = <0>;

				port@0 {
					reg = <0>;
					apss_funnel_in0: endpoint {
						remote-endpoint = <&etm0_out>;
					};
				};

				port@1 {
					reg = <1>;
					apss_funnel_in1: endpoint {
						remote-endpoint = <&etm1_out>;
					};
				};

				port@2 {
					reg = <2>;
					apss_funnel_in2: endpoint {
						remote-endpoint = <&etm2_out>;
					};
				};

				port@3 {
					reg = <3>;
					apss_funnel_in3: endpoint {
						remote-endpoint = <&etm3_out>;
					};
				};

				port@4 {
					reg = <4>;
					apss_funnel_in4: endpoint {
						remote-endpoint = <&etm4_out>;
					};
				};

				port@5 {
					reg = <5>;
					apss_funnel_in5: endpoint {
						remote-endpoint = <&etm5_out>;
					};
				};

				port@6 {
					reg = <6>;
					apss_funnel_in6: endpoint {
						remote-endpoint = <&etm6_out>;
					};
				};

				port@7 {
					reg = <7>;
					apss_funnel_in7: endpoint {
						remote-endpoint = <&etm7_out>;
					};
				};
			};
		};

		funnel@7810000 {
			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
			reg = <0 0x07810000 0 0x1000>;

			clocks = <&aoss_qmp>;
			clock-names = "apb_pclk";

			out-ports {
				port {
					apss_merge_funnel_out: endpoint {
						remote-endpoint = <&funnel1_in4>;
					};
				};
			};

			in-ports {
				port {
					apss_merge_funnel_in: endpoint {
						remote-endpoint = <&apss_funnel_out>;
					};
				};
			};
		};

		sdhc_2: sdhci@8804000 {
			compatible = "qcom,sc7180-sdhci", "qcom,sdhci-msm-v5";
			reg = <0 0x08804000 0 0x1000>;

			iommus = <&apps_smmu 0x80 0>;
			interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
					<GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
			interrupt-names = "hc_irq", "pwr_irq";

			clocks = <&gcc GCC_SDCC2_APPS_CLK>,
					<&gcc GCC_SDCC2_AHB_CLK>;
			clock-names = "core", "iface";

			interconnects = <&aggre1_noc MASTER_SDCC_2 0 &mc_virt SLAVE_EBI1 0>,
					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_SDCC_2 0>;
			interconnect-names = "sdhc-ddr","cpu-sdhc";
			power-domains = <&rpmhpd SC7180_CX>;
			operating-points-v2 = <&sdhc2_opp_table>;

			bus-width = <4>;

			status = "disabled";

			sdhc2_opp_table: sdhc2-opp-table {
				compatible = "operating-points-v2";

				opp-100000000 {
					opp-hz = /bits/ 64 <100000000>;
					required-opps = <&rpmhpd_opp_low_svs>;
					opp-peak-kBps = <160000 100000>;
					opp-avg-kBps = <80000 50000>;
				};

				opp-202000000 {
					opp-hz = /bits/ 64 <202000000>;
					required-opps = <&rpmhpd_opp_svs_l1>;
					opp-peak-kBps = <200000	120000>;
					opp-avg-kBps = <100000 60000>;
				};
			};
		};

		qspi_opp_table: qspi-opp-table {
			compatible = "operating-points-v2";

			opp-75000000 {
				opp-hz = /bits/ 64 <75000000>;
				required-opps = <&rpmhpd_opp_low_svs>;
			};

			opp-150000000 {
				opp-hz = /bits/ 64 <150000000>;
				required-opps = <&rpmhpd_opp_svs>;
			};

			opp-300000000 {
				opp-hz = /bits/ 64 <300000000>;
				required-opps = <&rpmhpd_opp_nom>;
			};
		};

		qspi: spi@88dc000 {
			compatible = "qcom,qspi-v1";
			reg = <0 0x088dc000 0 0x600>;
			#address-cells = <1>;
			#size-cells = <0>;
			interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&gcc GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
				 <&gcc GCC_QSPI_CORE_CLK>;
			clock-names = "iface", "core";
			interconnects = <&gem_noc MASTER_APPSS_PROC 0
					&config_noc SLAVE_QSPI_0 0>;
			interconnect-names = "qspi-config";
			power-domains = <&rpmhpd SC7180_CX>;
			operating-points-v2 = <&qspi_opp_table>;
			status = "disabled";
		};

		usb_1_hsphy: phy@88e3000 {
			compatible = "qcom,sc7180-qusb2-phy", "qcom,qusb2-v2-phy";
			reg = <0 0x088e3000 0 0x400>;
			status = "disabled";
			#phy-cells = <0>;
			clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
				 <&rpmhcc RPMH_CXO_CLK>;
			clock-names = "cfg_ahb", "ref";
			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;

			nvmem-cells = <&qusb2p_hstx_trim>;
		};

		usb_1_qmpphy: phy-wrapper@88e9000 {
			compatible = "qcom,sc7180-qmp-usb3-dp-phy";
			reg = <0 0x088e9000 0 0x18c>,
			      <0 0x088e8000 0 0x3c>,
			      <0 0x088ea000 0 0x18c>;
			status = "disabled";
			#address-cells = <2>;
			#size-cells = <2>;
			ranges;

			clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
				 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
				 <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
			clock-names = "aux", "cfg_ahb", "ref", "com_aux";

			resets = <&gcc GCC_USB3_PHY_PRIM_BCR>,
				 <&gcc GCC_USB3_DP_PHY_PRIM_BCR>;
			reset-names = "phy", "common";

			usb_1_ssphy: usb3-phy@88e9200 {
				reg = <0 0x088e9200 0 0x128>,
				      <0 0x088e9400 0 0x200>,
				      <0 0x088e9c00 0 0x218>,
				      <0 0x088e9600 0 0x128>,
				      <0 0x088e9800 0 0x200>,
				      <0 0x088e9a00 0 0x18>;
				#clock-cells = <0>;
				#phy-cells = <0>;
				clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
				clock-names = "pipe0";
				clock-output-names = "usb3_phy_pipe_clk_src";
			};

			dp_phy: dp-phy@88ea200 {
				reg = <0 0x088ea200 0 0x200>,
				      <0 0x088ea400 0 0x200>,
				      <0 0x088eaa00 0 0x200>,
				      <0 0x088ea600 0 0x200>,
				      <0 0x088ea800 0 0x200>;
				#clock-cells = <1>;
				#phy-cells = <0>;
			};
		};

		dc_noc: interconnect@9160000 {
			compatible = "qcom,sc7180-dc-noc";
			reg = <0 0x09160000 0 0x03200>;
			#interconnect-cells = <2>;
			qcom,bcm-voters = <&apps_bcm_voter>;
		};

		system-cache-controller@9200000 {
			compatible = "qcom,sc7180-llcc";
			reg = <0 0x09200000 0 0x50000>, <0 0x09600000 0 0x50000>;
			reg-names = "llcc_base", "llcc_broadcast_base";
			interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>;
		};

		gem_noc: interconnect@9680000 {
			compatible = "qcom,sc7180-gem-noc";
			reg = <0 0x09680000 0 0x3e200>;
			#interconnect-cells = <2>;
			qcom,bcm-voters = <&apps_bcm_voter>;
		};

		npu_noc: interconnect@9990000 {
			compatible = "qcom,sc7180-npu-noc";
			reg = <0 0x09990000 0 0x1600>;
			#interconnect-cells = <2>;
			qcom,bcm-voters = <&apps_bcm_voter>;
		};

		usb_1: usb@a6f8800 {
			compatible = "qcom,sc7180-dwc3", "qcom,dwc3";
			reg = <0 0x0a6f8800 0 0x400>;
			status = "disabled";
			#address-cells = <2>;
			#size-cells = <2>;
			ranges;
			dma-ranges;

			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
				 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
				 <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
				 <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
				 <&gcc GCC_USB30_PRIM_SLEEP_CLK>;
			clock-names = "cfg_noc", "core", "iface", "mock_utmi",
				      "sleep";

			assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
			assigned-clock-rates = <19200000>, <150000000>;

			interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
					      <&pdc 6 IRQ_TYPE_LEVEL_HIGH>,
					      <&pdc 8 IRQ_TYPE_LEVEL_HIGH>,
					      <&pdc 9 IRQ_TYPE_LEVEL_HIGH>;
			interrupt-names = "hs_phy_irq", "ss_phy_irq",
					  "dm_hs_phy_irq", "dp_hs_phy_irq";

			power-domains = <&gcc USB30_PRIM_GDSC>;

			resets = <&gcc GCC_USB30_PRIM_BCR>;

			interconnects = <&aggre2_noc MASTER_USB3 0 &mc_virt SLAVE_EBI1 0>,
					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3 0>;
			interconnect-names = "usb-ddr", "apps-usb";

			usb_1_dwc3: usb@a600000 {
				compatible = "snps,dwc3";
				reg = <0 0x0a600000 0 0xe000>;
				interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
				iommus = <&apps_smmu 0x540 0>;
				snps,dis_u2_susphy_quirk;
				snps,dis_enblslpm_quirk;
				phys = <&usb_1_hsphy>, <&usb_1_ssphy>;
				phy-names = "usb2-phy", "usb3-phy";
				maximum-speed = "super-speed";
			};
		};

		venus: video-codec@aa00000 {
			compatible = "qcom,sc7180-venus";
			reg = <0 0x0aa00000 0 0xff000>;
			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
			power-domains = <&videocc VENUS_GDSC>,
					<&videocc VCODEC0_GDSC>,
					<&rpmhpd SC7180_CX>;
			power-domain-names = "venus", "vcodec0", "cx";
			operating-points-v2 = <&venus_opp_table>;
			clocks = <&videocc VIDEO_CC_VENUS_CTL_CORE_CLK>,
				 <&videocc VIDEO_CC_VENUS_AHB_CLK>,
				 <&videocc VIDEO_CC_VENUS_CTL_AXI_CLK>,
				 <&videocc VIDEO_CC_VCODEC0_CORE_CLK>,
				 <&videocc VIDEO_CC_VCODEC0_AXI_CLK>;
			clock-names = "core", "iface", "bus",
				      "vcodec0_core", "vcodec0_bus";
			iommus = <&apps_smmu 0x0c00 0x60>;
			memory-region = <&venus_mem>;
			interconnects = <&mmss_noc MASTER_VIDEO_P0 0 &mc_virt SLAVE_EBI1 0>,
					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_VENUS_CFG 0>;
			interconnect-names = "video-mem", "cpu-cfg";

			video-decoder {
				compatible = "venus-decoder";
			};

			video-encoder {
				compatible = "venus-encoder";
			};

			venus_opp_table: venus-opp-table {
				compatible = "operating-points-v2";

				opp-150000000 {
					opp-hz = /bits/ 64 <150000000>;
					required-opps = <&rpmhpd_opp_low_svs>;
				};

				opp-270000000 {
					opp-hz = /bits/ 64 <270000000>;
					required-opps = <&rpmhpd_opp_svs>;
				};

				opp-340000000 {
					opp-hz = /bits/ 64 <340000000>;
					required-opps = <&rpmhpd_opp_svs_l1>;
				};

				opp-434000000 {
					opp-hz = /bits/ 64 <434000000>;
					required-opps = <&rpmhpd_opp_nom>;
				};

				opp-500000097 {
					opp-hz = /bits/ 64 <500000097>;
					required-opps = <&rpmhpd_opp_turbo>;
				};
			};
		};

		videocc: clock-controller@ab00000 {
			compatible = "qcom,sc7180-videocc";
			reg = <0 0x0ab00000 0 0x10000>;
			clocks = <&rpmhcc RPMH_CXO_CLK>;
			clock-names = "bi_tcxo";
			#clock-cells = <1>;
			#reset-cells = <1>;
			#power-domain-cells = <1>;
		};

		camnoc_virt: interconnect@ac00000 {
			compatible = "qcom,sc7180-camnoc-virt";
			reg = <0 0x0ac00000 0 0x1000>;
			#interconnect-cells = <2>;
			qcom,bcm-voters = <&apps_bcm_voter>;
		};

		camcc: clock-controller@ad00000 {
			compatible = "qcom,sc7180-camcc";
			reg = <0 0x0ad00000 0 0x10000>;
			clocks = <&rpmhcc RPMH_CXO_CLK>,
			       <&gcc GCC_CAMERA_AHB_CLK>,
			       <&gcc GCC_CAMERA_XO_CLK>;
			clock-names = "bi_tcxo", "iface", "xo";
			#clock-cells = <1>;
			#reset-cells = <1>;
			#power-domain-cells = <1>;
		};

		mdss: mdss@ae00000 {
			compatible = "qcom,sc7180-mdss";
			reg = <0 0x0ae00000 0 0x1000>;
			reg-names = "mdss";

			power-domains = <&dispcc MDSS_GDSC>;

			clocks = <&gcc GCC_DISP_AHB_CLK>,
				 <&dispcc DISP_CC_MDSS_AHB_CLK>,
				 <&dispcc DISP_CC_MDSS_MDP_CLK>;
			clock-names = "iface", "ahb", "core";

			assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>;
			assigned-clock-rates = <300000000>;

			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
			interrupt-controller;
			#interrupt-cells = <1>;

			interconnects = <&mmss_noc MASTER_MDP0 0 &mc_virt SLAVE_EBI1 0>;
			interconnect-names = "mdp0-mem";

			iommus = <&apps_smmu 0x800 0x2>;

			#address-cells = <2>;
			#size-cells = <2>;
			ranges;

			status = "disabled";

			mdp: mdp@ae01000 {
				compatible = "qcom,sc7180-dpu";
				reg = <0 0x0ae01000 0 0x8f000>,
				      <0 0x0aeb0000 0 0x2008>;
				reg-names = "mdp", "vbif";

				clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
					 <&dispcc DISP_CC_MDSS_ROT_CLK>,
					 <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
					 <&dispcc DISP_CC_MDSS_MDP_CLK>,
					 <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
				clock-names = "bus", "iface", "rot", "lut", "core",
					      "vsync";
				assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>,
						  <&dispcc DISP_CC_MDSS_VSYNC_CLK>,
						  <&dispcc DISP_CC_MDSS_ROT_CLK>,
						  <&dispcc DISP_CC_MDSS_AHB_CLK>;
				assigned-clock-rates = <300000000>,
						       <19200000>,
						       <19200000>,
						       <19200000>;
				operating-points-v2 = <&mdp_opp_table>;
				power-domains = <&rpmhpd SC7180_CX>;

				interrupt-parent = <&mdss>;
				interrupts = <0>;

				status = "disabled";

				ports {
					#address-cells = <1>;
					#size-cells = <0>;

					port@0 {
						reg = <0>;
						dpu_intf1_out: endpoint {
							remote-endpoint = <&dsi0_in>;
						};
					};
				};

				mdp_opp_table: mdp-opp-table {
					compatible = "operating-points-v2";

					opp-200000000 {
						opp-hz = /bits/ 64 <200000000>;
						required-opps = <&rpmhpd_opp_low_svs>;
					};

					opp-300000000 {
						opp-hz = /bits/ 64 <300000000>;
						required-opps = <&rpmhpd_opp_svs>;
					};

					opp-345000000 {
						opp-hz = /bits/ 64 <345000000>;
						required-opps = <&rpmhpd_opp_svs_l1>;
					};

					opp-460000000 {
						opp-hz = /bits/ 64 <460000000>;
						required-opps = <&rpmhpd_opp_nom>;
					};
				};

			};

			dsi0: dsi@ae94000 {
				compatible = "qcom,mdss-dsi-ctrl";
				reg = <0 0x0ae94000 0 0x400>;
				reg-names = "dsi_ctrl";

				interrupt-parent = <&mdss>;
				interrupts = <4>;

				clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
					 <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
					 <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
					 <&dispcc DISP_CC_MDSS_ESC0_CLK>,
					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
					 <&gcc GCC_DISP_HF_AXI_CLK>;
				clock-names = "byte",
					      "byte_intf",
					      "pixel",
					      "core",
					      "iface",
					      "bus";

				operating-points-v2 = <&dsi_opp_table>;
				power-domains = <&rpmhpd SC7180_CX>;

				phys = <&dsi_phy>;
				phy-names = "dsi";

				#address-cells = <1>;
				#size-cells = <0>;

				status = "disabled";

				ports {
					#address-cells = <1>;
					#size-cells = <0>;

					port@0 {
						reg = <0>;
						dsi0_in: endpoint {
							remote-endpoint = <&dpu_intf1_out>;
						};
					};

					port@1 {
						reg = <1>;
						dsi0_out: endpoint {
						};
					};
				};

				dsi_opp_table: dsi-opp-table {
					compatible = "operating-points-v2";

					opp-187500000 {
						opp-hz = /bits/ 64 <187500000>;
						required-opps = <&rpmhpd_opp_low_svs>;
					};

					opp-300000000 {
						opp-hz = /bits/ 64 <300000000>;
						required-opps = <&rpmhpd_opp_svs>;
					};

					opp-358000000 {
						opp-hz = /bits/ 64 <358000000>;
						required-opps = <&rpmhpd_opp_svs_l1>;
					};
				};
			};

			dsi_phy: dsi-phy@ae94400 {
				compatible = "qcom,dsi-phy-10nm";
				reg = <0 0x0ae94400 0 0x200>,
				      <0 0x0ae94600 0 0x280>,
				      <0 0x0ae94a00 0 0x1e0>;
				reg-names = "dsi_phy",
					    "dsi_phy_lane",
					    "dsi_pll";

				#clock-cells = <1>;
				#phy-cells = <0>;

				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
					 <&rpmhcc RPMH_CXO_CLK>;
				clock-names = "iface", "ref";

				status = "disabled";
			};
		};

		dispcc: clock-controller@af00000 {
			compatible = "qcom,sc7180-dispcc";
			reg = <0 0x0af00000 0 0x200000>;
			clocks = <&rpmhcc RPMH_CXO_CLK>,
				 <&gcc GCC_DISP_GPLL0_CLK_SRC>,
				 <&dsi_phy 0>,
				 <&dsi_phy 1>,
				 <&dp_phy 0>,
				 <&dp_phy 1>;
			clock-names = "bi_tcxo",
				      "gcc_disp_gpll0_clk_src",
				      "dsi0_phy_pll_out_byteclk",
				      "dsi0_phy_pll_out_dsiclk",
				      "dp_phy_pll_link_clk",
				      "dp_phy_pll_vco_div_clk";
			#clock-cells = <1>;
			#reset-cells = <1>;
			#power-domain-cells = <1>;
		};

		pdc: interrupt-controller@b220000 {
			compatible = "qcom,sc7180-pdc", "qcom,pdc";
			reg = <0 0x0b220000 0 0x30000>;
			qcom,pdc-ranges = <0 480 94>, <94 609 31>, <125 63 1>;
			#interrupt-cells = <2>;
			interrupt-parent = <&intc>;
			interrupt-controller;
		};

		pdc_reset: reset-controller@b2e0000 {
			compatible = "qcom,sc7180-pdc-global", "qcom,sdm845-pdc-global";
			reg = <0 0x0b2e0000 0 0x20000>;
			#reset-cells = <1>;
		};

		tsens0: thermal-sensor@c263000 {
			compatible = "qcom,sc7180-tsens","qcom,tsens-v2";
			reg = <0 0x0c263000 0 0x1ff>, /* TM */
				<0 0x0c222000 0 0x1ff>; /* SROT */
			#qcom,sensors = <15>;
			interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>;
			interrupt-names = "uplow","critical";
			#thermal-sensor-cells = <1>;
		};

		tsens1: thermal-sensor@c265000 {
			compatible = "qcom,sc7180-tsens","qcom,tsens-v2";
			reg = <0 0x0c265000 0 0x1ff>, /* TM */
				<0 0x0c223000 0 0x1ff>; /* SROT */
			#qcom,sensors = <10>;
			interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>;
			interrupt-names = "uplow","critical";
			#thermal-sensor-cells = <1>;
		};

		aoss_reset: reset-controller@c2a0000 {
			compatible = "qcom,sc7180-aoss-cc", "qcom,sdm845-aoss-cc";
			reg = <0 0x0c2a0000 0 0x31000>;
			#reset-cells = <1>;
		};

		aoss_qmp: power-controller@c300000 {
			compatible = "qcom,sc7180-aoss-qmp";
			reg = <0 0x0c300000 0 0x100000>;
			interrupts = <GIC_SPI 389 IRQ_TYPE_EDGE_RISING>;
			mboxes = <&apss_shared 0>;

			#clock-cells = <0>;
			#power-domain-cells = <1>;
		};

		spmi_bus: spmi@c440000 {
			compatible = "qcom,spmi-pmic-arb";
			reg = <0 0x0c440000 0 0x1100>,
			      <0 0x0c600000 0 0x2000000>,
			      <0 0x0e600000 0 0x100000>,
			      <0 0x0e700000 0 0xa0000>,
			      <0 0x0c40a000 0 0x26000>;
			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
			interrupt-names = "periph_irq";
			interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
			qcom,ee = <0>;
			qcom,channel = <0>;
			#address-cells = <1>;
			#size-cells = <1>;
			interrupt-controller;
			#interrupt-cells = <4>;
			cell-index = <0>;
		};

		apps_smmu: iommu@15000000 {
			compatible = "qcom,sc7180-smmu-500", "arm,mmu-500";
			reg = <0 0x15000000 0 0x100000>;
			#iommu-cells = <2>;
			#global-interrupts = <1>;
			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 410 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 411 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>;
		};

		intc: interrupt-controller@17a00000 {
			compatible = "arm,gic-v3";
			#address-cells = <2>;
			#size-cells = <2>;
			ranges;
			#interrupt-cells = <3>;
			interrupt-controller;
			reg = <0 0x17a00000 0 0x10000>,     /* GICD */
			      <0 0x17a60000 0 0x100000>;    /* GICR * 8 */
			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;

			msi-controller@17a40000 {
				compatible = "arm,gic-v3-its";
				msi-controller;
				#msi-cells = <1>;
				reg = <0 0x17a40000 0 0x20000>;
				status = "disabled";
			};
		};

		apss_shared: mailbox@17c00000 {
			compatible = "qcom,sc7180-apss-shared";
			reg = <0 0x17c00000 0 0x10000>;
			#mbox-cells = <1>;
		};

		watchdog@17c10000 {
			compatible = "qcom,apss-wdt-sc7180", "qcom,kpss-wdt";
			reg = <0 0x17c10000 0 0x1000>;
			clocks = <&sleep_clk>;
			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
		};

		timer@17c20000{
			#address-cells = <2>;
			#size-cells = <2>;
			ranges;
			compatible = "arm,armv7-timer-mem";
			reg = <0 0x17c20000 0 0x1000>;

			frame@17c21000 {
				frame-number = <0>;
				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
				reg = <0 0x17c21000 0 0x1000>,
				      <0 0x17c22000 0 0x1000>;
			};

			frame@17c23000 {
				frame-number = <1>;
				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
				reg = <0 0x17c23000 0 0x1000>;
				status = "disabled";
			};

			frame@17c25000 {
				frame-number = <2>;
				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
				reg = <0 0x17c25000 0 0x1000>;
				status = "disabled";
			};

			frame@17c27000 {
				frame-number = <3>;
				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
				reg = <0 0x17c27000 0 0x1000>;
				status = "disabled";
			};

			frame@17c29000 {
				frame-number = <4>;
				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
				reg = <0 0x17c29000 0 0x1000>;
				status = "disabled";
			};

			frame@17c2b000 {
				frame-number = <5>;
				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
				reg = <0 0x17c2b000 0 0x1000>;
				status = "disabled";
			};

			frame@17c2d000 {
				frame-number = <6>;
				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
				reg = <0 0x17c2d000 0 0x1000>;
				status = "disabled";
			};
		};

		apps_rsc: rsc@18200000 {
			compatible = "qcom,rpmh-rsc";
			reg = <0 0x18200000 0 0x10000>,
			      <0 0x18210000 0 0x10000>,
			      <0 0x18220000 0 0x10000>;
			reg-names = "drv-0", "drv-1", "drv-2";
			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
			qcom,tcs-offset = <0xd00>;
			qcom,drv-id = <2>;
			qcom,tcs-config = <ACTIVE_TCS  2>,
					  <SLEEP_TCS   3>,
					  <WAKE_TCS    3>,
					  <CONTROL_TCS 1>;

			rpmhcc: clock-controller {
				compatible = "qcom,sc7180-rpmh-clk";
				clocks = <&xo_board>;
				clock-names = "xo";
				#clock-cells = <1>;
			};

			rpmhpd: power-controller {
				compatible = "qcom,sc7180-rpmhpd";
				#power-domain-cells = <1>;
				operating-points-v2 = <&rpmhpd_opp_table>;

				rpmhpd_opp_table: opp-table {
					compatible = "operating-points-v2";

					rpmhpd_opp_ret: opp1 {
						opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
					};

					rpmhpd_opp_min_svs: opp2 {
						opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
					};

					rpmhpd_opp_low_svs: opp3 {
						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
					};

					rpmhpd_opp_svs: opp4 {
						opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
					};

					rpmhpd_opp_svs_l1: opp5 {
						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
					};

					rpmhpd_opp_svs_l2: opp6 {
						opp-level = <224>;
					};

					rpmhpd_opp_nom: opp7 {
						opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
					};

					rpmhpd_opp_nom_l1: opp8 {
						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
					};

					rpmhpd_opp_nom_l2: opp9 {
						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
					};

					rpmhpd_opp_turbo: opp10 {
						opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
					};

					rpmhpd_opp_turbo_l1: opp11 {
						opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
					};
				};
			};

			apps_bcm_voter: bcm_voter {
				compatible = "qcom,bcm-voter";
			};
		};

		osm_l3: interconnect@18321000 {
			compatible = "qcom,sc7180-osm-l3";
			reg = <0 0x18321000 0 0x1400>;

			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
			clock-names = "xo", "alternate";

			#interconnect-cells = <1>;
		};

		cpufreq_hw: cpufreq@18323000 {
			compatible = "qcom,cpufreq-hw";
			reg = <0 0x18323000 0 0x1400>, <0 0x18325800 0 0x1400>;
			reg-names = "freq-domain0", "freq-domain1";

			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
			clock-names = "xo", "alternate";

			#freq-domain-cells = <1>;
		};

		wifi: wifi@18800000 {
			compatible = "qcom,wcn3990-wifi";
			reg = <0 0x18800000 0 0x800000>;
			reg-names = "membase";
			iommus = <&apps_smmu 0xc0 0x1>;
			interrupts =
				<GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH /* CE0 */ >,
				<GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH /* CE1 */ >,
				<GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH /* CE2 */ >,
				<GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH /* CE3 */ >,
				<GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH /* CE4 */ >,
				<GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH /* CE5 */ >,
				<GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH /* CE6 */ >,
				<GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH /* CE7 */ >,
				<GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH /* CE8 */ >,
				<GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH /* CE9 */ >,
				<GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH /* CE10 */>,
				<GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH /* CE11 */>;
			memory-region = <&wlan_mem>;
			qcom,msa-fixed-perm;
			status = "disabled";
		};

		lpasscc: clock-controller@62d00000 {
			compatible = "qcom,sc7180-lpasscorecc";
			reg = <0 0x62d00000 0 0x50000>,
			      <0 0x62780000 0 0x30000>;
			reg-names = "lpass_core_cc", "lpass_audio_cc";
			clocks = <&gcc GCC_LPASS_CFG_NOC_SWAY_CLK>,
				 <&rpmhcc RPMH_CXO_CLK>;
			clock-names = "iface", "bi_tcxo";
			power-domains = <&lpass_hm LPASS_CORE_HM_GDSCR>;
			#clock-cells = <1>;
			#power-domain-cells = <1>;
		};

		lpass_cpu: lpass@62f00000 {
			compatible = "qcom,sc7180-lpass-cpu";

			reg = <0 0x62f00000 0 0x29000>;
			reg-names = "lpass-lpaif";

			iommus = <&apps_smmu 0x1020 0>,
				<&apps_smmu 0x1021 0>;

			power-domains = <&lpass_hm LPASS_CORE_HM_GDSCR>;

			clocks = <&gcc GCC_LPASS_CFG_NOC_SWAY_CLK>,
				 <&lpasscc LPASS_AUDIO_CORE_CORE_CLK>,
				 <&lpasscc LPASS_AUDIO_CORE_EXT_MCLK0_CLK>,
				 <&lpasscc LPASS_AUDIO_CORE_SYSNOC_MPORT_CORE_CLK>,
				 <&lpasscc LPASS_AUDIO_CORE_LPAIF_PRI_IBIT_CLK>,
				 <&lpasscc LPASS_AUDIO_CORE_LPAIF_SEC_IBIT_CLK>;

			clock-names = "pcnoc-sway-clk", "audio-core",
					"mclk0", "pcnoc-mport-clk",
					"mi2s-bit-clk0", "mi2s-bit-clk1";


			#sound-dai-cells = <1>;
			#address-cells = <1>;
			#size-cells = <0>;

			interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>;
			interrupt-names = "lpass-irq-lpaif";
		};

		lpass_hm: clock-controller@63000000 {
			compatible = "qcom,sc7180-lpasshm";
			reg = <0 0x63000000 0 0x28>;
			clocks = <&gcc GCC_LPASS_CFG_NOC_SWAY_CLK>,
				 <&rpmhcc RPMH_CXO_CLK>;
			clock-names = "iface", "bi_tcxo";
			#clock-cells = <1>;
			#power-domain-cells = <1>;
		};
	};

	thermal-zones {
		cpu0_thermal: cpu0-thermal {
			polling-delay-passive = <250>;
			polling-delay = <0>;

			thermal-sensors = <&tsens0 1>;
			sustainable-power = <768>;

			trips {
				cpu0_alert0: trip-point0 {
					temperature = <90000>;
					hysteresis = <2000>;
					type = "passive";
				};

				cpu0_alert1: trip-point1 {
					temperature = <95000>;
					hysteresis = <2000>;
					type = "passive";
				};

				cpu0_crit: cpu_crit {
					temperature = <110000>;
					hysteresis = <1000>;
					type = "critical";
				};
			};

			cooling-maps {
				map0 {
					trip = <&cpu0_alert0>;
					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
				};
				map1 {
					trip = <&cpu0_alert1>;
					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
				};
			};
		};

		cpu1_thermal: cpu1-thermal {
			polling-delay-passive = <250>;
			polling-delay = <0>;

			thermal-sensors = <&tsens0 2>;
			sustainable-power = <768>;

			trips {
				cpu1_alert0: trip-point0 {
					temperature = <90000>;
					hysteresis = <2000>;
					type = "passive";
				};

				cpu1_alert1: trip-point1 {
					temperature = <95000>;
					hysteresis = <2000>;
					type = "passive";
				};

				cpu1_crit: cpu_crit {
					temperature = <110000>;
					hysteresis = <1000>;
					type = "critical";
				};
			};

			cooling-maps {
				map0 {
					trip = <&cpu1_alert0>;
					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
				};
				map1 {
					trip = <&cpu1_alert1>;
					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
				};
			};
		};

		cpu2_thermal: cpu2-thermal {
			polling-delay-passive = <250>;
			polling-delay = <0>;

			thermal-sensors = <&tsens0 3>;
			sustainable-power = <768>;

			trips {
				cpu2_alert0: trip-point0 {
					temperature = <90000>;
					hysteresis = <2000>;
					type = "passive";
				};

				cpu2_alert1: trip-point1 {
					temperature = <95000>;
					hysteresis = <2000>;
					type = "passive";
				};

				cpu2_crit: cpu_crit {
					temperature = <110000>;
					hysteresis = <1000>;
					type = "critical";
				};
			};

			cooling-maps {
				map0 {
					trip = <&cpu2_alert0>;
					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
				};
				map1 {
					trip = <&cpu2_alert1>;
					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
				};
			};
		};

		cpu3_thermal: cpu3-thermal {
			polling-delay-passive = <250>;
			polling-delay = <0>;

			thermal-sensors = <&tsens0 4>;
			sustainable-power = <768>;

			trips {
				cpu3_alert0: trip-point0 {
					temperature = <90000>;
					hysteresis = <2000>;
					type = "passive";
				};

				cpu3_alert1: trip-point1 {
					temperature = <95000>;
					hysteresis = <2000>;
					type = "passive";
				};

				cpu3_crit: cpu_crit {
					temperature = <110000>;
					hysteresis = <1000>;
					type = "critical";
				};
			};

			cooling-maps {
				map0 {
					trip = <&cpu3_alert0>;
					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
				};
				map1 {
					trip = <&cpu3_alert1>;
					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
				};
			};
		};

		cpu4_thermal: cpu4-thermal {
			polling-delay-passive = <250>;
			polling-delay = <0>;

			thermal-sensors = <&tsens0 5>;
			sustainable-power = <768>;

			trips {
				cpu4_alert0: trip-point0 {
					temperature = <90000>;
					hysteresis = <2000>;
					type = "passive";
				};

				cpu4_alert1: trip-point1 {
					temperature = <95000>;
					hysteresis = <2000>;
					type = "passive";
				};

				cpu4_crit: cpu_crit {
					temperature = <110000>;
					hysteresis = <1000>;
					type = "critical";
				};
			};

			cooling-maps {
				map0 {
					trip = <&cpu4_alert0>;
					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
				};
				map1 {
					trip = <&cpu4_alert1>;
					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
				};
			};
		};

		cpu5_thermal: cpu5-thermal {
			polling-delay-passive = <250>;
			polling-delay = <0>;

			thermal-sensors = <&tsens0 6>;
			sustainable-power = <768>;

			trips {
				cpu5_alert0: trip-point0 {
					temperature = <90000>;
					hysteresis = <2000>;
					type = "passive";
				};

				cpu5_alert1: trip-point1 {
					temperature = <95000>;
					hysteresis = <2000>;
					type = "passive";
				};

				cpu5_crit: cpu_crit {
					temperature = <110000>;
					hysteresis = <1000>;
					type = "critical";
				};
			};

			cooling-maps {
				map0 {
					trip = <&cpu5_alert0>;
					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
				};
				map1 {
					trip = <&cpu5_alert1>;
					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
				};
			};
		};

		cpu6_thermal: cpu6-thermal {
			polling-delay-passive = <250>;
			polling-delay = <0>;

			thermal-sensors = <&tsens0 9>;
			sustainable-power = <1202>;

			trips {
				cpu6_alert0: trip-point0 {
					temperature = <90000>;
					hysteresis = <2000>;
					type = "passive";
				};

				cpu6_alert1: trip-point1 {
					temperature = <95000>;
					hysteresis = <2000>;
					type = "passive";
				};

				cpu6_crit: cpu_crit {
					temperature = <110000>;
					hysteresis = <1000>;
					type = "critical";
				};
			};

			cooling-maps {
				map0 {
					trip = <&cpu6_alert0>;
					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
				};
				map1 {
					trip = <&cpu6_alert1>;
					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
				};
			};
		};

		cpu7_thermal: cpu7-thermal {
			polling-delay-passive = <250>;
			polling-delay = <0>;

			thermal-sensors = <&tsens0 10>;
			sustainable-power = <1202>;

			trips {
				cpu7_alert0: trip-point0 {
					temperature = <90000>;
					hysteresis = <2000>;
					type = "passive";
				};

				cpu7_alert1: trip-point1 {
					temperature = <95000>;
					hysteresis = <2000>;
					type = "passive";
				};

				cpu7_crit: cpu_crit {
					temperature = <110000>;
					hysteresis = <1000>;
					type = "critical";
				};
			};

			cooling-maps {
				map0 {
					trip = <&cpu7_alert0>;
					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
				};
				map1 {
					trip = <&cpu7_alert1>;
					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
				};
			};
		};

		cpu8_thermal: cpu8-thermal {
			polling-delay-passive = <250>;
			polling-delay = <0>;

			thermal-sensors = <&tsens0 11>;
			sustainable-power = <1202>;

			trips {
				cpu8_alert0: trip-point0 {
					temperature = <90000>;
					hysteresis = <2000>;
					type = "passive";
				};

				cpu8_alert1: trip-point1 {
					temperature = <95000>;
					hysteresis = <2000>;
					type = "passive";
				};

				cpu8_crit: cpu_crit {
					temperature = <110000>;
					hysteresis = <1000>;
					type = "critical";
				};
			};

			cooling-maps {
				map0 {
					trip = <&cpu8_alert0>;
					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
				};
				map1 {
					trip = <&cpu8_alert1>;
					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
				};
			};
		};

		cpu9_thermal: cpu9-thermal {
			polling-delay-passive = <250>;
			polling-delay = <0>;

			thermal-sensors = <&tsens0 12>;
			sustainable-power = <1202>;

			trips {
				cpu9_alert0: trip-point0 {
					temperature = <90000>;
					hysteresis = <2000>;
					type = "passive";
				};

				cpu9_alert1: trip-point1 {
					temperature = <95000>;
					hysteresis = <2000>;
					type = "passive";
				};

				cpu9_crit: cpu_crit {
					temperature = <110000>;
					hysteresis = <1000>;
					type = "critical";
				};
			};

			cooling-maps {
				map0 {
					trip = <&cpu9_alert0>;
					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
				};
				map1 {
					trip = <&cpu9_alert1>;
					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
				};
			};
		};

		aoss0-thermal {
			polling-delay-passive = <250>;
			polling-delay = <0>;

			thermal-sensors = <&tsens0 0>;

			trips {
				aoss0_alert0: trip-point0 {
					temperature = <90000>;
					hysteresis = <2000>;
					type = "hot";
				};

				aoss0_crit: aoss0_crit {
					temperature = <110000>;
					hysteresis = <2000>;
					type = "critical";
				};
			};
		};

		cpuss0-thermal {
			polling-delay-passive = <250>;
			polling-delay = <0>;

			thermal-sensors = <&tsens0 7>;

			trips {
				cpuss0_alert0: trip-point0 {
					temperature = <90000>;
					hysteresis = <2000>;
					type = "hot";
				};
				cpuss0_crit: cluster0_crit {
					temperature = <110000>;
					hysteresis = <2000>;
					type = "critical";
				};
			};
		};

		cpuss1-thermal {
			polling-delay-passive = <250>;
			polling-delay = <0>;

			thermal-sensors = <&tsens0 8>;

			trips {
				cpuss1_alert0: trip-point0 {
					temperature = <90000>;
					hysteresis = <2000>;
					type = "hot";
				};
				cpuss1_crit: cluster0_crit {
					temperature = <110000>;
					hysteresis = <2000>;
					type = "critical";
				};
			};
		};

		gpuss0-thermal {
			polling-delay-passive = <250>;
			polling-delay = <0>;

			thermal-sensors = <&tsens0 13>;

			trips {
				gpuss0_alert0: trip-point0 {
					temperature = <95000>;
					hysteresis = <2000>;
					type = "passive";
				};

				gpuss0_crit: gpuss0_crit {
					temperature = <110000>;
					hysteresis = <2000>;
					type = "critical";
				};
			};

			cooling-maps {
				map0 {
					trip = <&gpuss0_alert0>;
					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
				};
			};
		};

		gpuss1-thermal {
			polling-delay-passive = <250>;
			polling-delay = <0>;

			thermal-sensors = <&tsens0 14>;

			trips {
				gpuss1_alert0: trip-point0 {
					temperature = <95000>;
					hysteresis = <2000>;
					type = "passive";
				};

				gpuss1_crit: gpuss1_crit {
					temperature = <110000>;
					hysteresis = <2000>;
					type = "critical";
				};
			};

			cooling-maps {
				map0 {
					trip = <&gpuss1_alert0>;
					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
				};
			};
		};

		aoss1-thermal {
			polling-delay-passive = <250>;
			polling-delay = <0>;

			thermal-sensors = <&tsens1 0>;

			trips {
				aoss1_alert0: trip-point0 {
					temperature = <90000>;
					hysteresis = <2000>;
					type = "hot";
				};

				aoss1_crit: aoss1_crit {
					temperature = <110000>;
					hysteresis = <2000>;
					type = "critical";
				};
			};
		};

		cwlan-thermal {
			polling-delay-passive = <250>;
			polling-delay = <0>;

			thermal-sensors = <&tsens1 1>;

			trips {
				cwlan_alert0: trip-point0 {
					temperature = <90000>;
					hysteresis = <2000>;
					type = "hot";
				};

				cwlan_crit: cwlan_crit {
					temperature = <110000>;
					hysteresis = <2000>;
					type = "critical";
				};
			};
		};

		audio-thermal {
			polling-delay-passive = <250>;
			polling-delay = <0>;

			thermal-sensors = <&tsens1 2>;

			trips {
				audio_alert0: trip-point0 {
					temperature = <90000>;
					hysteresis = <2000>;
					type = "hot";
				};

				audio_crit: audio_crit {
					temperature = <110000>;
					hysteresis = <2000>;
					type = "critical";
				};
			};
		};

		ddr-thermal {
			polling-delay-passive = <250>;
			polling-delay = <0>;

			thermal-sensors = <&tsens1 3>;

			trips {
				ddr_alert0: trip-point0 {
					temperature = <90000>;
					hysteresis = <2000>;
					type = "hot";
				};

				ddr_crit: ddr_crit {
					temperature = <110000>;
					hysteresis = <2000>;
					type = "critical";
				};
			};
		};

		q6-hvx-thermal {
			polling-delay-passive = <250>;
			polling-delay = <0>;

			thermal-sensors = <&tsens1 4>;

			trips {
				q6_hvx_alert0: trip-point0 {
					temperature = <90000>;
					hysteresis = <2000>;
					type = "hot";
				};

				q6_hvx_crit: q6_hvx_crit {
					temperature = <110000>;
					hysteresis = <2000>;
					type = "critical";
				};
			};
		};

		camera-thermal {
			polling-delay-passive = <250>;
			polling-delay = <0>;

			thermal-sensors = <&tsens1 5>;

			trips {
				camera_alert0: trip-point0 {
					temperature = <90000>;
					hysteresis = <2000>;
					type = "hot";
				};

				camera_crit: camera_crit {
					temperature = <110000>;
					hysteresis = <2000>;
					type = "critical";
				};
			};
		};

		mdm-core-thermal {
			polling-delay-passive = <250>;
			polling-delay = <0>;

			thermal-sensors = <&tsens1 6>;

			trips {
				mdm_alert0: trip-point0 {
					temperature = <90000>;
					hysteresis = <2000>;
					type = "hot";
				};

				mdm_crit: mdm_crit {
					temperature = <110000>;
					hysteresis = <2000>;
					type = "critical";
				};
			};
		};

		mdm-dsp-thermal {
			polling-delay-passive = <250>;
			polling-delay = <0>;

			thermal-sensors = <&tsens1 7>;

			trips {
				mdm_dsp_alert0: trip-point0 {
					temperature = <90000>;
					hysteresis = <2000>;
					type = "hot";
				};

				mdm_dsp_crit: mdm_dsp_crit {
					temperature = <110000>;
					hysteresis = <2000>;
					type = "critical";
				};
			};
		};

		npu-thermal {
			polling-delay-passive = <250>;
			polling-delay = <0>;

			thermal-sensors = <&tsens1 8>;

			trips {
				npu_alert0: trip-point0 {
					temperature = <90000>;
					hysteresis = <2000>;
					type = "hot";
				};

				npu_crit: npu_crit {
					temperature = <110000>;
					hysteresis = <2000>;
					type = "critical";
				};
			};
		};

		video-thermal {
			polling-delay-passive = <250>;
			polling-delay = <0>;

			thermal-sensors = <&tsens1 9>;

			trips {
				video_alert0: trip-point0 {
					temperature = <90000>;
					hysteresis = <2000>;
					type = "hot";
				};

				video_crit: video_crit {
					temperature = <110000>;
					hysteresis = <2000>;
					type = "critical";
				};
			};
		};
	};

	timer {
		compatible = "arm,armv8-timer";
		interrupts = <GIC_PPI 1 IRQ_TYPE_LEVEL_LOW>,
			     <GIC_PPI 2 IRQ_TYPE_LEVEL_LOW>,
			     <GIC_PPI 3 IRQ_TYPE_LEVEL_LOW>,
			     <GIC_PPI 0 IRQ_TYPE_LEVEL_LOW>;
	};
};