xref: /linux/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi (revision 0d6ccfe6b319d56da63b7d7cfbcecd92780a680d) 
1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2/*
3 * Google CoachZ board device tree source
4 *
5 * Copyright 2020 Google LLC.
6 */
7
8#include "sc7180-trogdor.dtsi"
9#include "sc7180-trogdor-ti-sn65dsi86.dtsi"
10#include "sc7180-trogdor-detachable.dtsi"
11
12/* Deleted nodes from sc7180-trogdor.dtsi */
13
14/delete-node/ &pp3300_codec;
15
16/ {
17	/* BOARD-SPECIFIC TOP LEVEL NODES */
18
19	adau7002: audio-codec-1 {
20		compatible = "adi,adau7002";
21		IOVDD-supply = <&pp1800_l15a>;
22		wakeup-delay-ms = <80>;
23		#sound-dai-cells = <0>;
24	};
25
26	thermal-zones {
27		skin_temp_thermal: skin-temp-thermal {
28			polling-delay-passive = <250>;
29
30			thermal-sensors = <&pm6150_adc_tm 1>;
31			sustainable-power = <965>;
32
33			trips {
34				skin_temp_alert0: trip-point0 {
35					temperature = <42000>;
36					hysteresis = <1000>;
37					type = "passive";
38				};
39
40				skin_temp_alert1: trip-point1 {
41					temperature = <45000>;
42					hysteresis = <1000>;
43					type = "passive";
44				};
45
46				skin-temp-crit {
47					temperature = <60000>;
48					hysteresis = <1000>;
49					type = "critical";
50				};
51			};
52
53			cooling-maps {
54				map0 {
55					trip = <&skin_temp_alert0>;
56					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
57							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
58				};
59
60				map1 {
61					trip = <&skin_temp_alert1>;
62					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
63							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
64				};
65			};
66		};
67	};
68};
69
70&ap_spi_fp {
71	status = "okay";
72};
73
74&backlight {
75	pwms = <&cros_ec_pwm 0>;
76};
77
78&camcc {
79	status = "okay";
80};
81
82&cros_ec {
83	cros_ec_proximity: proximity {
84		compatible = "google,cros-ec-mkbp-proximity";
85		label = "proximity-wifi";
86	};
87};
88
89ap_ts_pen_1v8: &i2c4 {
90	status = "okay";
91	clock-frequency = <400000>;
92
93	ap_ts: touchscreen@5d {
94		compatible = "goodix,gt7375p";
95		reg = <0x5d>;
96		pinctrl-names = "default";
97		pinctrl-0 = <&ts_int_l>, <&ts_reset_l>;
98
99		interrupt-parent = <&tlmm>;
100		interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
101
102		panel = <&panel>;
103		reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>;
104
105		vdd-supply = <&pp3300_ts>;
106	};
107};
108
109&i2c9 {
110	status = "disabled";
111};
112
113&panel {
114	compatible = "boe,nv110wtm-n61";
115};
116
117&pm6150_adc {
118	channel@4e {
119		reg = <ADC5_AMUX_THM2_100K_PU>;
120		qcom,ratiometric;
121		qcom,hw-settle-time = <200>;
122		label = "skin_therm";
123	};
124};
125
126&pm6150_adc_tm {
127	status = "okay";
128
129	skin-temp-thermistor@1 {
130		reg = <1>;
131		io-channels = <&pm6150_adc ADC5_AMUX_THM2_100K_PU>;
132		qcom,ratiometric;
133		qcom,hw-settle-time-us = <200>;
134	};
135};
136
137&pp1800_uf_cam {
138	status = "okay";
139};
140
141&pp1800_wf_cam {
142	status = "okay";
143};
144
145&pp2800_uf_cam {
146	status = "okay";
147};
148
149&pp2800_wf_cam {
150	status = "okay";
151};
152
153&pp3300_dx_edp {
154	gpio = <&tlmm 67 GPIO_ACTIVE_HIGH>;
155};
156
157&sdhc_2 {
158	status = "okay";
159};
160
161&sn65dsi86_out {
162	data-lanes = <0 1 2 3>;
163};
164
165&sound {
166	compatible = "google,sc7180-coachz";
167	model = "sc7180-adau7002-max98357a";
168	audio-routing = "PDM_DAT", "DMIC";
169
170	pinctrl-names = "default";
171	pinctrl-0 = <&dmic_clk_en>;
172};
173
174&sound_multimedia0_codec {
175	sound-dai = <&adau7002>;
176};
177
178/* PINCTRL - modifications to sc7180-trogdor.dtsi */
179
180&en_pp3300_dx_edp {
181	pins = "gpio67";
182};
183
184&ts_reset_l {
185	/*
186	 * We want reset state by default and it will be up to the
187	 * driver to disable this when it's ready.
188	 */
189	output-low;
190};
191
192/* PINCTRL - board-specific pinctrl */
193
194&tlmm {
195	gpio-line-names = "HUB_RST_L",
196			  "AP_RAM_ID0",
197			  "AP_SKU_ID2",
198			  "AP_RAM_ID1",
199			  "FP_TO_AP_IRQ_L",
200			  "AP_RAM_ID2",
201			  "UF_CAM_EN",
202			  "WF_CAM_EN",
203			  "TS_RESET_L",
204			  "TS_INT_L",
205			  "FPMCU_BOOT0",
206			  "EDP_BRIJ_IRQ",
207			  "AP_EDP_BKLTEN",
208			  "UF_CAM_MCLK",
209			  "WF_CAM_CLK",
210			  "EDP_BRIJ_I2C_SDA",
211			  "EDP_BRIJ_I2C_SCL",
212			  "UF_CAM_SDA",
213			  "UF_CAM_SCL",
214			  "WF_CAM_SDA",
215			  "WF_CAM_SCL",
216			  "WLC_IRQ",
217			  "FP_RST_L",
218			  "AMP_EN",
219			  "WLC_NRST",
220			  "AP_SAR_SENSOR_SDA",
221			  "AP_SAR_SENSOR_SCL",
222			  "",
223			  "",
224			  "WF_CAM_RST_L",
225			  "UF_CAM_RST_L",
226			  "AP_BRD_ID2",
227			  "BRIJ_SUSPEND",
228			  "AP_BRD_ID0",
229			  "AP_H1_SPI_MISO",
230			  "AP_H1_SPI_MOSI",
231			  "AP_H1_SPI_CLK",
232			  "AP_H1_SPI_CS_L",
233			  "",
234			  "",
235			  "",
236			  "",
237			  "H1_AP_INT_ODL",
238			  "",
239			  "UART_AP_TX_DBG_RX",
240			  "UART_DBG_TX_AP_RX",
241			  "",
242			  "",
243			  "FORCED_USB_BOOT",
244			  "AMP_BCLK",
245			  "AMP_LRCLK",
246			  "AMP_DIN",
247			  "",
248			  "HP_BCLK",
249			  "HP_LRCLK",
250			  "HP_DOUT",
251			  "HP_DIN",
252			  "HP_MCLK",
253			  "AP_SKU_ID0",
254			  "AP_EC_SPI_MISO",
255			  "AP_EC_SPI_MOSI",
256			  "AP_EC_SPI_CLK",
257			  "AP_EC_SPI_CS_L",
258			  "AP_SPI_CLK",
259			  "AP_SPI_MOSI",
260			  "AP_SPI_MISO",
261			  /*
262			   * AP_FLASH_WP_L is crossystem ABI. Schematics
263			   * call it BIOS_FLASH_WP_L.
264			   */
265			  "AP_FLASH_WP_L",
266			  "EN_PP3300_DX_EDP",
267			  "AP_SPI_CS0_L",
268			  "SD_CD_ODL",
269			  "",
270			  "",
271			  "",
272			  "",
273			  "EN_FP_RAILS",
274			  "UIM2_DATA",
275			  "UIM2_CLK",
276			  "UIM2_RST",
277			  "UIM2_PRESENT_L",
278			  "UIM1_DATA",
279			  "UIM1_CLK",
280			  "UIM1_RST",
281			  "",
282			  "",
283			  "HUB_EN",
284			  "",
285			  "AP_SPI_FP_MISO",
286			  "AP_SPI_FP_MOSI",
287			  "AP_SPI_FP_CLK",
288			  "AP_SPI_FP_CS_L",
289			  "AP_SKU_ID1",
290			  "AP_RST_REQ",
291			  "",
292			  "AP_BRD_ID1",
293			  "AP_EC_INT_L",
294			  "",
295			  "",
296			  "",
297			  "",
298			  "",
299			  "",
300			  "",
301			  "",
302			  "",
303			  "EDP_BRIJ_EN",
304			  "",
305			  "",
306			  "",
307			  "",
308			  "",
309			  "",
310			  "",
311			  "",
312			  "",
313			  "",
314			  "AP_TS_PEN_I2C_SDA",
315			  "AP_TS_PEN_I2C_SCL",
316			  "DP_HOT_PLUG_DET",
317			  "EC_IN_RW_ODL";
318
319	dmic_clk_en: dmic-clk-en-state {
320		pins = "gpio83";
321		function = "gpio";
322		drive-strength = <8>;
323		bias-pull-up;
324	};
325};
326