xref: /linux/arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts (revision 34dc1baba215b826e454b8d19e4f24adbeb7d00d)
1// SPDX-License-Identifier: BSD-3-Clause
2
3/dts-v1/;
4
5#include <dt-bindings/gpio/gpio.h>
6#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
7
8#include "sc7180.dtsi"
9
10#include "pm6150.dtsi"
11#include "pm6150l.dtsi"
12
13/delete-node/ &tz_mem;
14/delete-node/ &ipa_fw_mem;
15
16/ {
17	model = "Acer Aspire 1";
18	compatible = "acer,aspire1", "qcom,sc7180";
19	chassis-type = "laptop";
20
21	aliases {
22		bluetooth0 = &bluetooth;
23		hsuart0 = &uart3;
24		serial0 = &uart8;
25		wifi0 = &wifi;
26	};
27
28	chosen {
29		stdout-path = "serial0:115200n8";
30	};
31
32	reserved-memory {
33		zap_mem: zap-shader@80840000 {
34			reg = <0x0 0x80840000 0 0x2000>;
35			no-map;
36		};
37
38		venus_mem: venus@85b00000 {
39			reg = <0x0 0x85b00000 0 0x500000>;
40			no-map;
41		};
42
43		mpss_mem: mpss@86000000 {
44			reg = <0x0 0x86000000 0x0 0x2000000>;
45			no-map;
46		};
47
48		adsp_mem: adsp@8e400000 {
49			reg = <0x0 0x8e400000 0x0 0x2800000>;
50			no-map;
51		};
52
53		wlan_mem: wlan@93900000 {
54			reg = <0x0 0x93900000 0x0 0x200000>;
55			no-map;
56		};
57	};
58
59	max98357a: audio-codec {
60		compatible = "maxim,max98357a";
61		sdmode-gpios = <&tlmm 23 GPIO_ACTIVE_HIGH>;
62
63		pinctrl-0 = <&amp_sd_mode_default>;
64		pinctrl-names = "default";
65
66		#sound-dai-cells = <0>;
67	};
68
69	backlight: backlight {
70		compatible = "pwm-backlight";
71		pwms = <&sn65dsi86_bridge 1000000>;
72		enable-gpios = <&tlmm 10 GPIO_ACTIVE_HIGH>;
73
74		pinctrl-0 = <&soc_bkoff_default>;
75		pinctrl-names = "default";
76	};
77
78	reg_brij_1p2: bridge-1p2-regulator {
79		compatible = "regulator-fixed";
80		regulator-name = "brij_1p2";
81		regulator-min-microvolt = <1200000>;
82		regulator-max-microvolt = <1200000>;
83
84		gpio = <&tlmm 19 GPIO_ACTIVE_HIGH>;
85		enable-active-high;
86
87		pinctrl-0 = <&reg_edp_1p2_en_default>;
88		pinctrl-names = "default";
89	};
90
91	reg_brij_1p8: bridge-regulator {
92		compatible = "regulator-fixed";
93		regulator-name = "brij_1p8";
94		regulator-min-microvolt = <1800000>;
95		regulator-max-microvolt = <1800000>;
96
97		vin-supply = <&vreg_l8c_1p8>;
98
99		gpio = <&tlmm 20 GPIO_ACTIVE_HIGH>;
100		enable-active-high;
101
102		pinctrl-0 = <&reg_edp_1p8_en_default>;
103		pinctrl-names = "default";
104	};
105
106	reg_codec_3p3: codec-regulator {
107		compatible = "regulator-fixed";
108		regulator-name = "codec_3p3";
109		regulator-min-microvolt = <3300000>;
110		regulator-max-microvolt = <3300000>;
111
112		gpio = <&tlmm 83 GPIO_ACTIVE_HIGH>;
113		enable-active-high;
114
115		pinctrl-0 = <&reg_audio_en_default>;
116		pinctrl-names = "default";
117	};
118
119	reg_lcm_3p3: panel-regulator {
120		compatible = "regulator-fixed";
121		regulator-name = "lcm_3p3";
122		regulator-min-microvolt = <3300000>;
123		regulator-max-microvolt = <3300000>;
124
125		gpio = <&tlmm 26 GPIO_ACTIVE_HIGH>;
126		enable-active-high;
127
128		pinctrl-0 = <&reg_lcm_en_default>;
129		pinctrl-names = "default";
130	};
131
132	reg_tp_3p3: touchpad-regulator {
133		compatible = "regulator-fixed";
134		regulator-name = "tp_3p3";
135		regulator-min-microvolt = <3300000>;
136		regulator-max-microvolt = <3300000>;
137
138		gpio = <&tlmm 25 GPIO_ACTIVE_HIGH>;
139		enable-active-high;
140
141		pinctrl-0 = <&reg_tp_en_default>;
142		pinctrl-names = "default";
143	};
144};
145
146&i2c2 {
147	clock-frequency = <400000>;
148	status = "okay";
149
150	/* embedded-controller@76 */
151};
152
153&i2c4 {
154	clock-frequency = <400000>;
155	status = "okay";
156
157	/*
158	 * NOTE: DSDT defines two possible touchpads, other one is
159	 *
160	 * reg = <0x15>;
161	 * hid-descr-addr = <0x1>;
162	 */
163
164	touchpad@2c {
165		compatible = "hid-over-i2c";
166		reg = <0x2c>;
167		hid-descr-addr = <0x20>;
168
169		vdd-supply = <&reg_tp_3p3>;
170
171		interrupts-extended = <&tlmm 94 IRQ_TYPE_LEVEL_LOW>;
172
173		pinctrl-0 = <&hid_touchpad_default>;
174		pinctrl-names = "default";
175
176		wakeup-source;
177	};
178
179	keyboard@3a {
180		compatible = "hid-over-i2c";
181		reg = <0x3a>;
182		hid-descr-addr = <0x1>;
183
184		interrupts-extended = <&tlmm 33 IRQ_TYPE_LEVEL_LOW>;
185
186		pinctrl-0 = <&hid_keyboard_default>;
187		pinctrl-names = "default";
188
189		wakeup-source;
190	};
191};
192
193&i2c9 {
194	clock-frequency = <400000>;
195	status = "okay";
196
197	alc5682: codec@1a {
198		compatible = "realtek,rt5682i";
199		reg = <0x1a>;
200
201		#sound-dai-cells = <1>;
202
203		interrupt-parent = <&tlmm>;
204		interrupts = <28 IRQ_TYPE_EDGE_BOTH>;
205
206		pinctrl-0 = <&codec_irq_default>;
207		pinctrl-names = "default";
208
209		AVDD-supply = <&vreg_l15a_1p8>;
210		MICVDD-supply = <&reg_codec_3p3>;
211		VBAT-supply = <&reg_codec_3p3>;
212
213		realtek,dmic1-data-pin = <1>;
214		realtek,dmic1-clk-pin = <1>;
215		realtek,jd-src = <1>;
216	};
217};
218
219&i2c10 {
220	clock-frequency = <400000>;
221	status = "okay";
222
223	sn65dsi86_bridge: bridge@2c {
224		compatible = "ti,sn65dsi86";
225		reg = <0x2c>;
226		gpio-controller;
227		#gpio-cells = <2>;
228		#pwm-cells = <1>;
229
230		interrupt-parent = <&tlmm>;
231		interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
232
233		enable-gpios = <&tlmm 51 GPIO_ACTIVE_HIGH>;
234		suspend-gpios = <&tlmm 22 GPIO_ACTIVE_LOW>;
235
236		pinctrl-0 = <&bridge_en_default>,
237			    <&edp_bridge_irq_default>,
238			    <&bridge_suspend_default>;
239		pinctrl-names = "default";
240
241		vpll-supply = <&reg_brij_1p8>;
242		vccio-supply = <&reg_brij_1p8>;
243		vcca-supply = <&reg_brij_1p2>;
244		vcc-supply = <&reg_brij_1p2>;
245
246		clocks = <&rpmhcc RPMH_LN_BB_CLK3>;
247		clock-names = "refclk";
248
249		ports {
250			#address-cells = <1>;
251			#size-cells = <0>;
252
253			port@0 {
254				reg = <0>;
255
256				sn65dsi86_in: endpoint {
257					remote-endpoint = <&mdss_dsi0_out>;
258				};
259			};
260
261			port@1 {
262				reg = <1>;
263
264				sn65dsi86_out: endpoint {
265					data-lanes = <0 1>;
266					remote-endpoint = <&panel_in_edp>;
267				};
268			};
269		};
270
271		aux-bus {
272			panel: panel {
273				compatible = "edp-panel";
274				power-supply = <&reg_lcm_3p3>;
275				backlight = <&backlight>;
276				hpd-absent-delay-ms = <200>;
277
278				port {
279					panel_in_edp: endpoint {
280						remote-endpoint = <&sn65dsi86_out>;
281					};
282				};
283			};
284		};
285	};
286};
287
288&gpu {
289	status = "okay";
290
291	zap-shader {
292		memory-region = <&zap_mem>;
293		firmware-name = "qcom/sc7180/acer/aspire1/qcdxkmsuc7180.mbn";
294	};
295};
296
297&mdss {
298	status = "okay";
299};
300
301&mdss_dsi0 {
302	vdda-supply = <&vreg_l3c_1p2>;
303	status = "okay";
304};
305
306&mdss_dsi0_out {
307	remote-endpoint = <&sn65dsi86_in>;
308	data-lanes = <0 1 2 3>;
309};
310
311&mdss_dsi0_phy {
312	vdds-supply = <&vreg_l4a_0p8>;
313	status = "okay";
314};
315
316&pm6150_adc {
317	channel@4e {
318		reg = <ADC5_AMUX_THM2_100K_PU>;
319		qcom,ratiometric;
320		qcom,hw-settle-time = <200>;
321		label = "thermistor";
322	};
323
324	channel@4f {
325		reg = <ADC5_AMUX_THM3_100K_PU>;
326		qcom,ratiometric;
327		qcom,hw-settle-time = <200>;
328		label = "charger_thermistor";
329	};
330};
331
332&pm6150_adc_tm {
333	status = "okay";
334
335	charger-thermistor@0 {
336		reg = <0>;
337		io-channels = <&pm6150_adc ADC5_AMUX_THM3_100K_PU>;
338		qcom,ratiometric;
339		qcom,hw-settle-time-us = <200>;
340	};
341
342	thermistor@1 {
343		reg = <1>;
344		io-channels = <&pm6150_adc ADC5_AMUX_THM2_100K_PU>;
345		qcom,ratiometric;
346		qcom,hw-settle-time-us = <200>;
347	};
348};
349
350&pm6150_pon {
351	status = "disabled";
352};
353
354&qupv3_id_0 {
355	status = "okay";
356};
357
358&qupv3_id_1 {
359	status = "okay";
360};
361
362&remoteproc_mpss {
363	firmware-name = "qcom/sc7180/acer/aspire1/qcmpss7180_nm.mbn";
364	status = "okay";
365};
366
367&sdhc_1 {
368	pinctrl-0 = <&sdc1_default>;
369	pinctrl-1 = <&sdc1_sleep>;
370	pinctrl-names = "default", "sleep";
371	vmmc-supply = <&vreg_l19a_2p9>;
372	vqmmc-supply = <&vreg_l12a_1p8>;
373
374	status = "okay";
375};
376
377&uart3 {
378	/delete-property/interrupts;
379	interrupts-extended = <&intc GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>,
380			      <&tlmm 41 IRQ_TYPE_EDGE_FALLING>;
381
382	pinctrl-1 = <&qup_uart3_sleep>;
383	pinctrl-names = "default", "sleep";
384
385	status = "okay";
386
387	bluetooth: bluetooth {
388		compatible = "qcom,wcn3991-bt";
389		vddio-supply = <&vreg_l10a_1p8>;
390		vddxo-supply = <&vreg_l1c_1p8>;
391		vddrf-supply = <&vreg_l2c_1p3>;
392		vddch0-supply = <&vreg_l10c_3p3>;
393		max-speed = <3200000>;
394	};
395};
396
397&uart8 {
398	status = "okay";
399};
400
401&usb_1 {
402	status = "okay";
403};
404
405&usb_1_dwc3 {
406	dr_mode = "host";
407	#address-cells = <1>;
408	#size-cells = <0>;
409
410	usb_hub_2_x: hub@1 {
411		compatible = "usbbda,5411";
412		reg = <1>;
413		peer-hub = <&usb_hub_3_x>;
414	};
415
416	usb_hub_3_x: hub@2 {
417		compatible = "usbbda,411";
418		reg = <2>;
419		peer-hub = <&usb_hub_2_x>;
420	};
421};
422
423&usb_1_hsphy {
424	vdd-supply = <&vreg_l4a_0p8>;
425	vdda-pll-supply = <&vreg_l11a_1p8>;
426	vdda-phy-dpdm-supply = <&vreg_l17a_3p0>;
427	qcom,imp-res-offset-value = <8>;
428	qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_15_PERCENT>;
429	qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>;
430	qcom,bias-ctrl-value = <0x22>;
431	qcom,charge-ctrl-value = <3>;
432	qcom,hsdisc-trim-value = <0>;
433
434	status = "okay";
435};
436
437&usb_1_qmpphy {
438	vdda-phy-supply = <&vreg_l3c_1p2>;
439	vdda-pll-supply = <&vreg_l4a_0p8>;
440
441	status = "okay";
442};
443
444&venus {
445	firmware-name = "qcom/sc7180/acer/aspire1/qcvss7180.mbn";
446};
447
448&wifi {
449	vdd-0.8-cx-mx-supply = <&vreg_l9a_0p6>;
450	vdd-1.8-xo-supply = <&vreg_l1c_1p8>;
451	vdd-1.3-rfa-supply = <&vreg_l2c_1p3>;
452	vdd-3.3-ch0-supply = <&vreg_l10c_3p3>;
453	vdd-3.3-ch1-supply = <&vreg_l11c_3p3>;
454
455	status = "okay";
456};
457
458&apps_rsc {
459	regulators-0 {
460		compatible = "qcom,pm6150-rpmh-regulators";
461		qcom,pmic-id = "a";
462
463		vreg_s1a_1p1: smps1 {
464			regulator-min-microvolt = <1128000>;
465			regulator-max-microvolt = <1128000>;
466		};
467
468		vreg_l4a_0p8: ldo4 {
469			regulator-min-microvolt = <824000>;
470			regulator-max-microvolt = <928000>;
471			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
472		};
473
474		vreg_l9a_0p6: ldo9 {
475			regulator-min-microvolt = <488000>;
476			regulator-max-microvolt = <800000>;
477			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
478		};
479
480		vreg_l10a_1p8: ldo10 {
481			regulator-min-microvolt = <1800000>;
482			regulator-max-microvolt = <1800000>;
483			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
484			regulator-always-on;
485			regulator-boot-on;
486		};
487
488		vreg_l11a_1p8: ldo11 {
489			regulator-min-microvolt = <1800000>;
490			regulator-max-microvolt = <1800000>;
491			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
492		};
493
494		vreg_l12a_1p8: ldo12 {
495			regulator-min-microvolt = <1800000>;
496			regulator-max-microvolt = <1800000>;
497			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
498		};
499
500		vreg_l13a_1p8: ldo13 {
501			regulator-min-microvolt = <1800000>;
502			regulator-max-microvolt = <1800000>;
503			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
504		};
505
506		vreg_l14a_1p8: ldo14 {
507			regulator-min-microvolt = <1800000>;
508			regulator-max-microvolt = <1800000>;
509			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
510		};
511
512		vreg_l15a_1p8: ldo15 {
513			regulator-min-microvolt = <1800000>;
514			regulator-max-microvolt = <1800000>;
515			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
516		};
517
518		vreg_l16a_2p7: ldo16 {
519			regulator-min-microvolt = <2496000>;
520			regulator-max-microvolt = <3304000>;
521			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
522		};
523
524		vreg_l17a_3p0: ldo17 {
525			regulator-min-microvolt = <2920000>;
526			regulator-max-microvolt = <3232000>;
527			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
528		};
529
530		vreg_l18a_2p8: ldo18 {
531			regulator-min-microvolt = <2496000>;
532			regulator-max-microvolt = <3304000>;
533			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
534		};
535
536		vreg_l19a_2p9: ldo19 {
537			regulator-min-microvolt = <2960000>;
538			regulator-max-microvolt = <2960000>;
539			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
540		};
541	};
542
543	regulators-1 {
544		compatible = "qcom,pm6150l-rpmh-regulators";
545		qcom,pmic-id = "c";
546
547		vreg_s8c_1p3: smps8 {
548			regulator-min-microvolt = <1120000>;
549			regulator-max-microvolt = <1408000>;
550		};
551
552		vreg_l1c_1p8: ldo1 {
553			regulator-min-microvolt = <1616000>;
554			regulator-max-microvolt = <1984000>;
555			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
556		};
557
558		vreg_l2c_1p3: ldo2 {
559			regulator-min-microvolt = <1168000>;
560			regulator-max-microvolt = <1304000>;
561			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
562		};
563
564		vreg_l3c_1p2: ldo3 {
565			regulator-min-microvolt = <1144000>;
566			regulator-max-microvolt = <1304000>;
567			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
568		};
569
570		vreg_l4c_1p8: ldo4 {
571			regulator-min-microvolt = <1648000>;
572			regulator-max-microvolt = <3304000>;
573			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
574		};
575
576		vreg_l5c_1p8: ldo5 {
577			regulator-min-microvolt = <1648000>;
578			regulator-max-microvolt = <3304000>;
579			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
580		};
581
582		vreg_l6c_2p9: ldo6 {
583			regulator-min-microvolt = <1800000>;
584			regulator-max-microvolt = <2950000>;
585			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
586		};
587
588		vreg_l7c_3p0: ldo7 {
589			regulator-min-microvolt = <3000000>;
590			regulator-max-microvolt = <3312000>;
591			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
592		};
593
594		vreg_l8c_1p8: ldo8 {
595			regulator-min-microvolt = <1800000>;
596			regulator-max-microvolt = <1800000>;
597			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
598		};
599
600		vreg_l9c_2p9: ldo9 {
601			regulator-min-microvolt = <2952000>;
602			regulator-max-microvolt = <2952000>;
603			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
604		};
605
606		vreg_l10c_3p3: ldo10 {
607			regulator-min-microvolt = <3000000>;
608			regulator-max-microvolt = <3400000>;
609			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
610		};
611
612		vreg_l11c_3p3: ldo11 {
613			regulator-min-microvolt = <3000000>;
614			regulator-max-microvolt = <3400000>;
615			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
616		};
617
618		vreg_bob: bob {
619			regulator-min-microvolt = <3008000>;
620			regulator-max-microvolt = <3960000>;
621			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
622		};
623	};
624};
625
626&qup_i2c2_default {
627	drive-strength = <2>;
628
629	/* Has external pullup */
630	bias-disable;
631};
632
633&qup_i2c4_default {
634	drive-strength = <2>;
635
636	/* Has external pullup */
637	bias-disable;
638};
639
640&qup_i2c9_default {
641	drive-strength = <2>;
642
643	/* Has external pullup */
644	bias-disable;
645};
646
647&qup_i2c10_default {
648	drive-strength = <2>;
649
650	/* Has external pullup */
651	bias-disable;
652};
653
654&tlmm {
655	/*
656	 * The TZ seem to protect those because some boards can have
657	 * fingerprint sensor connected to this range. Not connected
658	 * on this board
659	 */
660	gpio-reserved-ranges = <58 5>;
661
662	amp_sd_mode_default: amp-sd-mode-deault-state {
663		pins = "gpio23";
664		function = "gpio";
665		drive-strength = <16>;
666		bias-disable;
667	};
668
669	bridge_en_default: bridge-en-default-state {
670		pins = "gpio51";
671		function = "gpio";
672		drive-strength = <16>;
673		bias-disable;
674	};
675
676	bridge_suspend_default: bridge-suspend-default-state {
677		pins = "gpio22";
678		function = "gpio";
679		drive-strength = <16>;
680		bias-pull-up;
681	};
682
683	codec_irq_default: codec-irq-deault-state {
684		pins = "gpio28";
685		function = "gpio";
686		drive-strength = <2>;
687		bias-disable;
688	};
689
690	edp_bridge_irq_default: edp-bridge-irq-default-state {
691		pins = "gpio11";
692		function = "gpio";
693		drive-strength = <2>;
694		bias-pull-down;
695	};
696
697	hid_keyboard_default: hid-keyboard-default-state {
698		pins = "gpio33";
699		function = "gpio";
700		drive-strength = <2>;
701		bias-disable;
702	};
703
704	hid_touchpad_default: hid-touchpad-default-state {
705		pins = "gpio94";
706		function = "gpio";
707		drive-strength = <2>;
708		bias-disable;
709	};
710
711	qup_uart3_sleep: qup-uart3-sleep-state {
712		cts-pins {
713			/*
714			 * Configure a pull-down on CTS to match the pull of
715			 * the Bluetooth module.
716			 */
717			pins = "gpio38";
718			function = "gpio";
719			bias-pull-down;
720		};
721
722		rts-pins {
723			/*
724			 * Configure pull-down on RTS. As RTS is active low
725			 * signal, pull it low to indicate the BT SoC that it
726			 * can wakeup the system anytime from suspend state by
727			 * pulling RX low (by sending wakeup bytes).
728			 */
729			pins = "gpio39";
730			function = "gpio";
731			bias-pull-down;
732		};
733
734		tx-pins {
735			/*
736			 * Configure pull-up on TX when it isn't actively driven
737			 * to prevent BT SoC from receiving garbage during sleep.
738			 */
739			pins = "gpio40";
740			function = "gpio";
741			bias-pull-up;
742		};
743
744		rx-pins {
745			/*
746			 * Configure a pull-up on RX. This is needed to avoid
747			 * garbage data when the TX pin of the Bluetooth module
748			 * is floating which may cause spurious wakeups.
749			 */
750			pins = "gpio41";
751			function = "gpio";
752			bias-pull-up;
753		};
754	};
755
756	reg_edp_1p2_en_default: reg-edp-1p2-en-deault-state {
757		pins = "gpio19";
758		function = "gpio";
759		drive-strength = <16>;
760		bias-disable;
761	};
762
763	reg_edp_1p8_en_default: reg-edp-1p8-en-deault-state {
764		pins = "gpio20";
765		function = "gpio";
766		drive-strength = <16>;
767		bias-disable;
768	};
769
770	reg_lcm_en_default: reg-lcm-en-deault-state {
771		pins = "gpio26";
772		function = "gpio";
773		drive-strength = <16>;
774		bias-disable;
775	};
776
777	reg_audio_en_default: reg-audio-en-deault-state {
778		pins = "gpio83";
779		function = "gpio";
780		drive-strength = <2>;
781		bias-disable;
782	};
783
784	reg_tp_en_default: reg-tp-en-deault-state {
785		pins = "gpio25";
786		function = "gpio";
787		drive-strength = <2>;
788		bias-disable;
789	};
790
791	soc_bkoff_default: soc-bkoff-deault-state {
792		pins = "gpio10";
793		function = "gpio";
794		drive-strength = <16>;
795		bias-disable;
796	};
797
798	sdc1_default: sdc1-default-state {
799		clk-pins {
800			pins = "sdc1_clk";
801			drive-strength = <16>;
802			bias-disable;
803		};
804
805		cmd-pins {
806			pins = "sdc1_cmd";
807			drive-strength = <16>;
808			bias-pull-up;
809		};
810
811		data-pins {
812			pins = "sdc1_data";
813			drive-strength = <16>;
814			bias-pull-up;
815		};
816
817		rclk-pins {
818			pins = "sdc1_rclk";
819			bias-pull-down;
820		};
821	};
822
823	sdc1_sleep: sdc1-sleep-state {
824		clk-pins {
825			pins = "sdc1_clk";
826			drive-strength = <2>;
827			bias-disable;
828		};
829
830		cmd-pins {
831			pins = "sdc1_cmd";
832			drive-strength = <2>;
833			bias-pull-up;
834		};
835
836		data-pins {
837			pins = "sdc1_data";
838			drive-strength = <2>;
839			bias-pull-up;
840		};
841
842		rclk-pins {
843			pins = "sdc1_rclk";
844			bias-pull-down;
845		};
846	};
847};
848