1// SPDX-License-Identifier: BSD-3-Clause 2/* 3 * Copyright (c) 2023, Linaro Limited 4 */ 5 6/dts-v1/; 7 8#include <dt-bindings/gpio/gpio.h> 9#include <dt-bindings/regulator/qcom,rpmh-regulator.h> 10 11#include "sa8775p.dtsi" 12#include "sa8775p-pmics.dtsi" 13 14/ { 15 model = "Qualcomm SA8775P Ride"; 16 compatible = "qcom,sa8775p-ride", "qcom,sa8775p"; 17 18 aliases { 19 ethernet0 = ðernet0; 20 ethernet1 = ðernet1; 21 i2c11 = &i2c11; 22 i2c18 = &i2c18; 23 serial0 = &uart10; 24 serial1 = &uart12; 25 serial2 = &uart17; 26 spi16 = &spi16; 27 ufshc1 = &ufs_mem_hc; 28 }; 29 30 chosen { 31 stdout-path = "serial0:115200n8"; 32 }; 33}; 34 35&apps_rsc { 36 regulators-0 { 37 compatible = "qcom,pmm8654au-rpmh-regulators"; 38 qcom,pmic-id = "a"; 39 40 vreg_s4a: smps4 { 41 regulator-name = "vreg_s4a"; 42 regulator-min-microvolt = <1800000>; 43 regulator-max-microvolt = <1816000>; 44 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 45 }; 46 47 vreg_s5a: smps5 { 48 regulator-name = "vreg_s5a"; 49 regulator-min-microvolt = <1850000>; 50 regulator-max-microvolt = <1996000>; 51 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 52 }; 53 54 vreg_s9a: smps9 { 55 regulator-name = "vreg_s9a"; 56 regulator-min-microvolt = <535000>; 57 regulator-max-microvolt = <1120000>; 58 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 59 }; 60 61 vreg_l4a: ldo4 { 62 regulator-name = "vreg_l4a"; 63 regulator-min-microvolt = <788000>; 64 regulator-max-microvolt = <1050000>; 65 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 66 regulator-allow-set-load; 67 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 68 RPMH_REGULATOR_MODE_HPM>; 69 }; 70 71 vreg_l5a: ldo5 { 72 regulator-name = "vreg_l5a"; 73 regulator-min-microvolt = <870000>; 74 regulator-max-microvolt = <950000>; 75 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 76 regulator-allow-set-load; 77 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 78 RPMH_REGULATOR_MODE_HPM>; 79 }; 80 81 vreg_l6a: ldo6 { 82 regulator-name = "vreg_l6a"; 83 regulator-min-microvolt = <870000>; 84 regulator-max-microvolt = <970000>; 85 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 86 regulator-allow-set-load; 87 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 88 RPMH_REGULATOR_MODE_HPM>; 89 }; 90 91 vreg_l7a: ldo7 { 92 regulator-name = "vreg_l7a"; 93 regulator-min-microvolt = <720000>; 94 regulator-max-microvolt = <950000>; 95 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 96 regulator-allow-set-load; 97 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 98 RPMH_REGULATOR_MODE_HPM>; 99 }; 100 101 vreg_l8a: ldo8 { 102 regulator-name = "vreg_l8a"; 103 regulator-min-microvolt = <2504000>; 104 regulator-max-microvolt = <3300000>; 105 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 106 regulator-allow-set-load; 107 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 108 RPMH_REGULATOR_MODE_HPM>; 109 }; 110 111 vreg_l9a: ldo9 { 112 regulator-name = "vreg_l9a"; 113 regulator-min-microvolt = <2970000>; 114 regulator-max-microvolt = <3544000>; 115 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 116 regulator-allow-set-load; 117 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 118 RPMH_REGULATOR_MODE_HPM>; 119 }; 120 }; 121 122 regulators-1 { 123 compatible = "qcom,pmm8654au-rpmh-regulators"; 124 qcom,pmic-id = "c"; 125 126 vreg_l1c: ldo1 { 127 regulator-name = "vreg_l1c"; 128 regulator-min-microvolt = <1140000>; 129 regulator-max-microvolt = <1260000>; 130 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 131 regulator-allow-set-load; 132 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 133 RPMH_REGULATOR_MODE_HPM>; 134 }; 135 136 vreg_l2c: ldo2 { 137 regulator-name = "vreg_l2c"; 138 regulator-min-microvolt = <900000>; 139 regulator-max-microvolt = <1100000>; 140 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 141 regulator-allow-set-load; 142 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 143 RPMH_REGULATOR_MODE_HPM>; 144 }; 145 146 vreg_l3c: ldo3 { 147 regulator-name = "vreg_l3c"; 148 regulator-min-microvolt = <1100000>; 149 regulator-max-microvolt = <1300000>; 150 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 151 regulator-allow-set-load; 152 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 153 RPMH_REGULATOR_MODE_HPM>; 154 }; 155 156 vreg_l4c: ldo4 { 157 regulator-name = "vreg_l4c"; 158 regulator-min-microvolt = <1200000>; 159 regulator-max-microvolt = <1200000>; 160 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 161 /* 162 * FIXME: This should have regulator-allow-set-load but 163 * we're getting an over-current fault from the PMIC 164 * when switching to LPM. 165 */ 166 }; 167 168 vreg_l5c: ldo5 { 169 regulator-name = "vreg_l5c"; 170 regulator-min-microvolt = <1100000>; 171 regulator-max-microvolt = <1300000>; 172 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 173 regulator-allow-set-load; 174 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 175 RPMH_REGULATOR_MODE_HPM>; 176 }; 177 178 vreg_l6c: ldo6 { 179 regulator-name = "vreg_l6c"; 180 regulator-min-microvolt = <1620000>; 181 regulator-max-microvolt = <1980000>; 182 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 183 regulator-allow-set-load; 184 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 185 RPMH_REGULATOR_MODE_HPM>; 186 }; 187 188 vreg_l7c: ldo7 { 189 regulator-name = "vreg_l7c"; 190 regulator-min-microvolt = <1620000>; 191 regulator-max-microvolt = <2000000>; 192 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 193 regulator-allow-set-load; 194 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 195 RPMH_REGULATOR_MODE_HPM>; 196 }; 197 198 vreg_l8c: ldo8 { 199 regulator-name = "vreg_l8c"; 200 regulator-min-microvolt = <2400000>; 201 regulator-max-microvolt = <3300000>; 202 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 203 regulator-allow-set-load; 204 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 205 RPMH_REGULATOR_MODE_HPM>; 206 }; 207 208 vreg_l9c: ldo9 { 209 regulator-name = "vreg_l9c"; 210 regulator-min-microvolt = <1650000>; 211 regulator-max-microvolt = <2700000>; 212 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 213 regulator-allow-set-load; 214 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 215 RPMH_REGULATOR_MODE_HPM>; 216 }; 217 }; 218 219 regulators-2 { 220 compatible = "qcom,pmm8654au-rpmh-regulators"; 221 qcom,pmic-id = "e"; 222 223 vreg_s4e: smps4 { 224 regulator-name = "vreg_s4e"; 225 regulator-min-microvolt = <970000>; 226 regulator-max-microvolt = <1520000>; 227 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 228 }; 229 230 vreg_s7e: smps7 { 231 regulator-name = "vreg_s7e"; 232 regulator-min-microvolt = <1010000>; 233 regulator-max-microvolt = <1170000>; 234 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 235 }; 236 237 vreg_s9e: smps9 { 238 regulator-name = "vreg_s9e"; 239 regulator-min-microvolt = <300000>; 240 regulator-max-microvolt = <570000>; 241 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 242 }; 243 244 vreg_l6e: ldo6 { 245 regulator-name = "vreg_l6e"; 246 regulator-min-microvolt = <1280000>; 247 regulator-max-microvolt = <1450000>; 248 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 249 regulator-allow-set-load; 250 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 251 RPMH_REGULATOR_MODE_HPM>; 252 }; 253 254 vreg_l8e: ldo8 { 255 regulator-name = "vreg_l8e"; 256 regulator-min-microvolt = <1800000>; 257 regulator-max-microvolt = <1950000>; 258 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 259 regulator-allow-set-load; 260 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 261 RPMH_REGULATOR_MODE_HPM>; 262 }; 263 }; 264}; 265 266ðernet0 { 267 phy-mode = "sgmii"; 268 phy-handle = <&sgmii_phy0>; 269 270 pinctrl-0 = <ðernet0_default>; 271 pinctrl-names = "default"; 272 273 snps,mtl-rx-config = <&mtl_rx_setup>; 274 snps,mtl-tx-config = <&mtl_tx_setup>; 275 snps,ps-speed = <1000>; 276 277 status = "okay"; 278 279 mdio { 280 compatible = "snps,dwmac-mdio"; 281 #address-cells = <1>; 282 #size-cells = <0>; 283 284 sgmii_phy0: phy@8 { 285 compatible = "ethernet-phy-id0141.0dd4"; 286 reg = <0x8>; 287 device_type = "ethernet-phy"; 288 reset-gpios = <&pmm8654au_2_gpios 8 GPIO_ACTIVE_LOW>; 289 reset-assert-us = <11000>; 290 reset-deassert-us = <70000>; 291 }; 292 293 sgmii_phy1: phy@a { 294 compatible = "ethernet-phy-id0141.0dd4"; 295 reg = <0xa>; 296 device_type = "ethernet-phy"; 297 reset-gpios = <&pmm8654au_2_gpios 9 GPIO_ACTIVE_LOW>; 298 reset-assert-us = <11000>; 299 reset-deassert-us = <70000>; 300 }; 301 }; 302 303 mtl_rx_setup: rx-queues-config { 304 snps,rx-queues-to-use = <4>; 305 snps,rx-sched-sp; 306 307 queue0 { 308 snps,dcb-algorithm; 309 snps,map-to-dma-channel = <0x0>; 310 snps,route-up; 311 snps,priority = <0x1>; 312 }; 313 314 queue1 { 315 snps,dcb-algorithm; 316 snps,map-to-dma-channel = <0x1>; 317 snps,route-ptp; 318 }; 319 320 queue2 { 321 snps,avb-algorithm; 322 snps,map-to-dma-channel = <0x2>; 323 snps,route-avcp; 324 }; 325 326 queue3 { 327 snps,avb-algorithm; 328 snps,map-to-dma-channel = <0x3>; 329 snps,priority = <0xc>; 330 }; 331 }; 332 333 mtl_tx_setup: tx-queues-config { 334 snps,tx-queues-to-use = <4>; 335 snps,tx-sched-sp; 336 337 queue0 { 338 snps,dcb-algorithm; 339 }; 340 341 queue1 { 342 snps,dcb-algorithm; 343 }; 344 345 queue2 { 346 snps,avb-algorithm; 347 snps,send_slope = <0x1000>; 348 snps,idle_slope = <0x1000>; 349 snps,high_credit = <0x3e800>; 350 snps,low_credit = <0xffc18000>; 351 }; 352 353 queue3 { 354 snps,avb-algorithm; 355 snps,send_slope = <0x1000>; 356 snps,idle_slope = <0x1000>; 357 snps,high_credit = <0x3e800>; 358 snps,low_credit = <0xffc18000>; 359 }; 360 }; 361}; 362 363ðernet1 { 364 phy-mode = "sgmii"; 365 phy-handle = <&sgmii_phy1>; 366 367 snps,mtl-rx-config = <&mtl_rx_setup1>; 368 snps,mtl-tx-config = <&mtl_tx_setup1>; 369 snps,ps-speed = <1000>; 370 371 status = "okay"; 372 373 mtl_rx_setup1: rx-queues-config { 374 snps,rx-queues-to-use = <4>; 375 snps,rx-sched-sp; 376 377 queue0 { 378 snps,dcb-algorithm; 379 snps,map-to-dma-channel = <0x0>; 380 snps,route-up; 381 snps,priority = <0x1>; 382 }; 383 384 queue1 { 385 snps,dcb-algorithm; 386 snps,map-to-dma-channel = <0x1>; 387 snps,route-ptp; 388 }; 389 390 queue2 { 391 snps,avb-algorithm; 392 snps,map-to-dma-channel = <0x2>; 393 snps,route-avcp; 394 }; 395 396 queue3 { 397 snps,avb-algorithm; 398 snps,map-to-dma-channel = <0x3>; 399 snps,priority = <0xc>; 400 }; 401 }; 402 403 mtl_tx_setup1: tx-queues-config { 404 snps,tx-queues-to-use = <4>; 405 snps,tx-sched-sp; 406 407 queue0 { 408 snps,dcb-algorithm; 409 }; 410 411 queue1 { 412 snps,dcb-algorithm; 413 }; 414 415 queue2 { 416 snps,avb-algorithm; 417 snps,send_slope = <0x1000>; 418 snps,idle_slope = <0x1000>; 419 snps,high_credit = <0x3e800>; 420 snps,low_credit = <0xffc18000>; 421 }; 422 423 queue3 { 424 snps,avb-algorithm; 425 snps,send_slope = <0x1000>; 426 snps,idle_slope = <0x1000>; 427 snps,high_credit = <0x3e800>; 428 snps,low_credit = <0xffc18000>; 429 }; 430 }; 431}; 432 433&i2c11 { 434 clock-frequency = <400000>; 435 pinctrl-0 = <&qup_i2c11_default>; 436 pinctrl-names = "default"; 437 status = "okay"; 438}; 439 440&i2c18 { 441 clock-frequency = <400000>; 442 pinctrl-0 = <&qup_i2c18_default>; 443 pinctrl-names = "default"; 444 status = "okay"; 445}; 446 447&pmm8654au_0_gpios { 448 gpio-line-names = "DS_EN", 449 "POFF_COMPLETE", 450 "UFS0_VER_ID", 451 "FAST_POFF", 452 "DBU1_PON_DONE", 453 "AOSS_SLEEP", 454 "CAM_DES0_EN", 455 "CAM_DES1_EN", 456 "CAM_DES2_EN", 457 "CAM_DES3_EN", 458 "UEFI", 459 "ANALOG_PON_OPT"; 460}; 461 462&pmm8654au_1_gpios { 463 gpio-line-names = "PMIC_C_ID0", 464 "PMIC_C_ID1", 465 "UFS1_VER_ID", 466 "IPA_PWR", 467 "", 468 "WLAN_DBU4_EN", 469 "WLAN_EN", 470 "BT_EN", 471 "USB2_PWR_EN", 472 "USB2_FAULT"; 473 474 usb2_en_state: usb2-en-state { 475 pins = "gpio9"; 476 function = "normal"; 477 output-high; 478 power-source = <0>; 479 }; 480}; 481 482&pmm8654au_2_gpios { 483 gpio-line-names = "PMIC_E_ID0", 484 "PMIC_E_ID1", 485 "USB0_PWR_EN", 486 "USB0_FAULT", 487 "SENSOR_IRQ_1", 488 "SENSOR_IRQ_2", 489 "SENSOR_RST", 490 "SGMIIO0_RST", 491 "SGMIIO1_RST", 492 "USB1_PWR_ENABLE", 493 "USB1_FAULT", 494 "VMON_SPX8"; 495 496 usb0_en_state: usb0-en-state { 497 pins = "gpio3"; 498 function = "normal"; 499 output-high; 500 power-source = <0>; 501 }; 502 503 usb1_en_state: usb1-en-state { 504 pins = "gpio10"; 505 function = "normal"; 506 output-high; 507 power-source = <0>; 508 }; 509}; 510 511&pmm8654au_3_gpios { 512 gpio-line-names = "PMIC_G_ID0", 513 "PMIC_G_ID1", 514 "GNSS_RST", 515 "GNSS_EN", 516 "GNSS_BOOT_MODE"; 517}; 518 519&qupv3_id_1 { 520 status = "okay"; 521}; 522 523&qupv3_id_2 { 524 status = "okay"; 525}; 526 527&serdes0 { 528 phy-supply = <&vreg_l5a>; 529 status = "okay"; 530}; 531 532&serdes1 { 533 phy-supply = <&vreg_l5a>; 534 status = "okay"; 535}; 536 537&sleep_clk { 538 clock-frequency = <32764>; 539}; 540 541&spi16 { 542 pinctrl-0 = <&qup_spi16_default>; 543 pinctrl-names = "default"; 544 status = "okay"; 545}; 546 547&tlmm { 548 ethernet0_default: ethernet0-default-state { 549 ethernet0_mdc: ethernet0-mdc-pins { 550 pins = "gpio8"; 551 function = "emac0_mdc"; 552 drive-strength = <16>; 553 bias-pull-up; 554 }; 555 556 ethernet0_mdio: ethernet0-mdio-pins { 557 pins = "gpio9"; 558 function = "emac0_mdio"; 559 drive-strength = <16>; 560 bias-pull-up; 561 }; 562 }; 563 564 qup_uart10_default: qup-uart10-state { 565 pins = "gpio46", "gpio47"; 566 function = "qup1_se3"; 567 }; 568 569 qup_spi16_default: qup-spi16-state { 570 pins = "gpio86", "gpio87", "gpio88", "gpio89"; 571 function = "qup2_se2"; 572 drive-strength = <6>; 573 bias-disable; 574 }; 575 576 qup_i2c11_default: qup-i2c11-state { 577 pins = "gpio48", "gpio49"; 578 function = "qup1_se4"; 579 drive-strength = <2>; 580 bias-pull-up; 581 }; 582 583 qup_i2c18_default: qup-i2c18-state { 584 pins = "gpio95", "gpio96"; 585 function = "qup2_se4"; 586 drive-strength = <2>; 587 bias-pull-up; 588 }; 589 590 qup_uart12_default: qup-uart12-state { 591 qup_uart12_cts: qup-uart12-cts-pins { 592 pins = "gpio52"; 593 function = "qup1_se5"; 594 bias-disable; 595 }; 596 597 qup_uart12_rts: qup-uart12-rts-pins { 598 pins = "gpio53"; 599 function = "qup1_se5"; 600 bias-pull-down; 601 }; 602 603 qup_uart12_tx: qup-uart12-tx-pins { 604 pins = "gpio54"; 605 function = "qup1_se5"; 606 bias-pull-up; 607 }; 608 609 qup_uart12_rx: qup-uart12-rx-pins { 610 pins = "gpio55"; 611 function = "qup1_se5"; 612 bias-pull-down; 613 }; 614 }; 615 616 qup_uart17_default: qup-uart17-state { 617 qup_uart17_cts: qup-uart17-cts-pins { 618 pins = "gpio91"; 619 function = "qup2_se3"; 620 bias-disable; 621 }; 622 623 qup_uart17_rts: qup0-uart17-rts-pins { 624 pins = "gpio92"; 625 function = "qup2_se3"; 626 bias-pull-down; 627 }; 628 629 qup_uart17_tx: qup0-uart17-tx-pins { 630 pins = "gpio93"; 631 function = "qup2_se3"; 632 bias-pull-up; 633 }; 634 635 qup_uart17_rx: qup0-uart17-rx-pins { 636 pins = "gpio94"; 637 function = "qup2_se3"; 638 bias-pull-down; 639 }; 640 }; 641 642 pcie0_default_state: pcie0-default-state { 643 perst-pins { 644 pins = "gpio2"; 645 function = "gpio"; 646 drive-strength = <2>; 647 bias-pull-down; 648 }; 649 650 clkreq-pins { 651 pins = "gpio1"; 652 function = "pcie0_clkreq"; 653 drive-strength = <2>; 654 bias-pull-up; 655 }; 656 657 wake-pins { 658 pins = "gpio0"; 659 function = "gpio"; 660 drive-strength = <2>; 661 bias-pull-up; 662 }; 663 }; 664 665 pcie1_default_state: pcie1-default-state { 666 perst-pins { 667 pins = "gpio4"; 668 function = "gpio"; 669 drive-strength = <2>; 670 bias-pull-down; 671 }; 672 673 clkreq-pins { 674 pins = "gpio3"; 675 function = "pcie1_clkreq"; 676 drive-strength = <2>; 677 bias-pull-up; 678 }; 679 680 wake-pins { 681 pins = "gpio5"; 682 function = "gpio"; 683 drive-strength = <2>; 684 bias-pull-up; 685 }; 686 }; 687}; 688 689&pcie0 { 690 perst-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>; 691 wake-gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>; 692 693 pinctrl-names = "default"; 694 pinctrl-0 = <&pcie0_default_state>; 695 696 status = "okay"; 697}; 698 699&pcie1 { 700 perst-gpios = <&tlmm 4 GPIO_ACTIVE_LOW>; 701 wake-gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>; 702 703 pinctrl-names = "default"; 704 pinctrl-0 = <&pcie1_default_state>; 705 706 status = "okay"; 707}; 708 709&pcie0_phy { 710 vdda-phy-supply = <&vreg_l5a>; 711 vdda-pll-supply = <&vreg_l1c>; 712 713 status = "okay"; 714}; 715 716&pcie1_phy { 717 vdda-phy-supply = <&vreg_l5a>; 718 vdda-pll-supply = <&vreg_l1c>; 719 720 status = "okay"; 721}; 722 723&uart10 { 724 compatible = "qcom,geni-debug-uart"; 725 pinctrl-0 = <&qup_uart10_default>; 726 pinctrl-names = "default"; 727 status = "okay"; 728}; 729 730&uart12 { 731 pinctrl-0 = <&qup_uart12_default>; 732 pinctrl-names = "default"; 733 status = "okay"; 734}; 735 736&uart17 { 737 pinctrl-0 = <&qup_uart17_default>; 738 pinctrl-names = "default"; 739 status = "okay"; 740}; 741 742&ufs_mem_hc { 743 reset-gpios = <&tlmm 149 GPIO_ACTIVE_LOW>; 744 vcc-supply = <&vreg_l8a>; 745 vcc-max-microamp = <1100000>; 746 vccq-supply = <&vreg_l4c>; 747 vccq-max-microamp = <1200000>; 748 749 status = "okay"; 750}; 751 752&ufs_mem_phy { 753 vdda-phy-supply = <&vreg_l4a>; 754 vdda-pll-supply = <&vreg_l1c>; 755 756 status = "okay"; 757}; 758 759&usb_0 { 760 pinctrl-names = "default"; 761 pinctrl-0 = <&usb0_en_state>; 762 763 status = "okay"; 764}; 765 766&usb_0_dwc3 { 767 dr_mode = "peripheral"; 768}; 769 770&usb_0_hsphy { 771 vdda-pll-supply = <&vreg_l7a>; 772 vdda18-supply = <&vreg_l6c>; 773 vdda33-supply = <&vreg_l9a>; 774 775 status = "okay"; 776}; 777 778&usb_0_qmpphy { 779 vdda-phy-supply = <&vreg_l1c>; 780 vdda-pll-supply = <&vreg_l7a>; 781 782 status = "okay"; 783}; 784 785&usb_1 { 786 pinctrl-names = "default"; 787 pinctrl-0 = <&usb1_en_state>; 788 789 status = "okay"; 790}; 791 792&usb_1_dwc3 { 793 dr_mode = "host"; 794}; 795 796&usb_1_hsphy { 797 vdda-pll-supply = <&vreg_l7a>; 798 vdda18-supply = <&vreg_l6c>; 799 vdda33-supply = <&vreg_l9a>; 800 801 status = "okay"; 802}; 803 804&usb_1_qmpphy { 805 vdda-phy-supply = <&vreg_l1c>; 806 vdda-pll-supply = <&vreg_l7a>; 807 808 status = "okay"; 809}; 810 811&usb_2 { 812 pinctrl-names = "default"; 813 pinctrl-0 = <&usb2_en_state>; 814 815 status = "okay"; 816}; 817 818&usb_2_dwc3 { 819 dr_mode = "host"; 820}; 821 822&usb_2_hsphy { 823 vdda-pll-supply = <&vreg_l7a>; 824 vdda18-supply = <&vreg_l6c>; 825 vdda33-supply = <&vreg_l9a>; 826 827 status = "okay"; 828}; 829 830&xo_board_clk { 831 clock-frequency = <38400000>; 832}; 833