xref: /linux/arch/arm64/boot/dts/qcom/qcs8550-rb5gen2.dts (revision cbe8aadf1551f3f4a853f24b3b96d9f0eea49c53)

// SPDX-License-Identifier: BSD-3-Clause
/*
 * Copyright (c) 2026 Axon Enterprise, Inc.
 */

/dts-v1/;

#include <dt-bindings/leds/common.h>
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
#include "qcs8550.dtsi"
#include "pm8010.dtsi"
#include "pm8550.dtsi"
#include "pm8550b.dtsi"
#define PMK8550VE_SID 5
#include "pm8550ve.dtsi"
#include "pm8550vs.dtsi"
#include "pmk8550.dtsi"
#include "pmr735d_a.dtsi"
#include "pmr735d_b.dtsi"

/ {
	model = "Qualcomm Technologies, Inc. QCS8550 RB5Gen2";
	compatible = "qcom,qcs8550-rb5gen2", "qcom,qcs8550", "qcom,sm8550";
	chassis-type = "embedded";

	aliases {
		serial0 = &uart7;
	};

	chosen {
		stdout-path = "serial0:115200n8";
	};

	clocks {
		clk40m: can-clk {
			compatible = "fixed-clock";
			clock-frequency = <40000000>;
			#clock-cells = <0>;
		};
	};

	gpio-keys {
		compatible = "gpio-keys";

		pinctrl-0 = <&volume_up_n>;
		pinctrl-names = "default";

		key-volume-up {
			label = "Volume Up";
			linux,code = <KEY_VOLUMEUP>;
			gpios = <&pm8550_gpios 6 GPIO_ACTIVE_LOW>;
			debounce-interval = <15>;
			linux,can-disable;
			wakeup-source;
		};
	};

	hdmi-connector {
		compatible = "hdmi-connector";
		type = "a";

		port {
			hdmi_con: endpoint {
				remote-endpoint = <&lt9611_out>;
			};
		};
	};

	/* Lontium LT9611UXC fails FW upgrade and has timeouts with geni-i2c */
	/* Workaround is to use bit-banged I2C */
	i2c_hub_3_gpio: i2c {
		compatible = "i2c-gpio";

		sda-gpios = <&tlmm 22 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
		scl-gpios = <&tlmm 23 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
		#address-cells = <1>;
		#size-cells = <0>;
	};

	leds {
		compatible = "gpio-leds";

		led-0 {
			label = "green:status-3";
			function = LED_FUNCTION_STATUS;
			color = <LED_COLOR_ID_GREEN>;
			gpios = <&pm8550_gpios 2 GPIO_ACTIVE_HIGH>;
			default-state = "off";
		};

		led-1 {
			label = "blue:bt-power";
			function = LED_FUNCTION_BLUETOOTH;
			color = <LED_COLOR_ID_BLUE>;
			gpios = <&pm8550b_gpios 7 GPIO_ACTIVE_HIGH>;
			linux,default-trigger = "bluetooth-power";
			default-state = "off";
		};

		led-2 {
			label = "yellow:wlan";
			function = LED_FUNCTION_WLAN;
			color = <LED_COLOR_ID_YELLOW>;
			gpios = <&pm8550b_gpios 9 GPIO_ACTIVE_HIGH>;
			linux,default-trigger = "phy0tx";
			default-state = "off";
		};
	};

	pmic-glink {
		compatible = "qcom,sm8550-pmic-glink", "qcom,pmic-glink";
		#address-cells = <1>;
		#size-cells = <0>;

		connector@0 {
			compatible = "usb-c-connector";
			reg = <0>;
			power-role = "dual";
			data-role = "dual";

			ports {
				#address-cells = <1>;
				#size-cells = <0>;

				port@0 {
					reg = <0>;

					pmic_glink_hs_in: endpoint {
						remote-endpoint = <&usb_1_dwc3_hs>;
					};
				};

				port@1 {
					reg = <1>;

					pmic_glink_ss_in: endpoint {
						remote-endpoint = <&redriver_usb_con_ss>;
					};
				};

				port@2 {
					reg = <2>;

					pmic_glink_sbu_in: endpoint {
						remote-endpoint = <&redriver_usb_con_sbu>;
					};
				};
			};
		};
	};

	lt9611_1v2: regulator-lt9611-1v2 {
		compatible = "regulator-fixed";
		regulator-name = "LT9611_1V2";

		regulator-min-microvolt = <1200000>;
		regulator-max-microvolt = <1200000>;

		vin-supply = <&vreg_l14b_3p2>;
	};

	lt9611_3v3: regulator-lt9611-3v3 {
		compatible = "regulator-fixed";
		regulator-name = "LT9611_3V3";

		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;

		vin-supply = <&vreg_l14b_3p2>;
	};

	pcie_upd_1p05: regulator-pcie-upd-1p05 {
		compatible = "regulator-fixed";
		regulator-name = "PCIE_UPD_1P05";
		gpio = <&tlmm 179 GPIO_ACTIVE_HIGH>;
		vin-supply = <&vdd_ntn_0p9>;
		regulator-min-microvolt = <1050000>;
		regulator-max-microvolt = <1050000>;
		enable-active-high;
		regulator-enable-ramp-delay = <5000>;
		pinctrl-0 = <&upd_1p05_en>;
		pinctrl-names = "default";
	};

	pcie_upd_3p3: regulator-pcie-upd-3p3 {
		compatible = "regulator-fixed";
		regulator-name = "PCIE_UPD_3P3";
		gpio = <&tlmm 13 GPIO_ACTIVE_HIGH>;
		vin-supply = <&pcie_upd_1p05>;
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		enable-active-high;
		regulator-enable-ramp-delay = <10000>;
		pinctrl-0 = <&upd_3p3_en>;
		pinctrl-names = "default";
	};

	vdd_ntn_0p9: regulator-vdd-ntn-0p9 {
		compatible = "regulator-fixed";
		regulator-name = "VDD_NTN_0P9";
		vin-supply = <&vdd_ntn_1p8>;
		regulator-min-microvolt = <899400>;
		regulator-max-microvolt = <899400>;
		regulator-enable-ramp-delay = <4300>;
	};

	vdd_ntn_1p8: regulator-vdd-ntn-1p8 {
		compatible = "regulator-fixed";
		regulator-name = "VDD_NTN_1P8";
		gpio = <&tlmm 67 GPIO_ACTIVE_HIGH>;
		regulator-min-microvolt = <1800000>;
		regulator-max-microvolt = <1800000>;
		enable-active-high;
		pinctrl-0 = <&ntn0_en>;
		pinctrl-names = "default";
		regulator-enable-ramp-delay = <10000>;
	};

	vdd_ntn1_0p9: regulator-vdd-ntn1-0p9 {
		compatible = "regulator-fixed";
		regulator-name = "VDD_NTN1_0P9";
		vin-supply = <&vdd_ntn1_1p8>;
		regulator-min-microvolt = <899400>;
		regulator-max-microvolt = <899400>;
		regulator-enable-ramp-delay = <4300>;
	};

	vdd_ntn1_1p8: regulator-vdd-ntn1-1p8 {
		compatible = "regulator-fixed";
		regulator-name = "VDD_NTN1_1P8";
		gpio = <&tlmm 42 GPIO_ACTIVE_HIGH>;
		regulator-min-microvolt = <1800000>;
		regulator-max-microvolt = <1800000>;
		enable-active-high;
		pinctrl-0 = <&ntn1_en>;
		pinctrl-names = "default";
		regulator-enable-ramp-delay = <10000>;
	};

	vph_pwr: regulator-vph-pwr {
		compatible = "regulator-fixed";
		regulator-name = "vph_pwr";
		regulator-min-microvolt = <3700000>;
		regulator-max-microvolt = <3700000>;

		regulator-always-on;
		regulator-boot-on;
	};

	sound {
		compatible = "qcom,sm8550-sndcard", "qcom,sm8450-sndcard";
		model = "QCS8550-RB5Gen2";
		audio-routing = "SpkrLeft IN", "WSA_SPK1 OUT",
				"SpkrRight IN", "WSA_SPK2 OUT",
				"VA DMIC0", "vdd-micb",
				"VA DMIC1", "vdd-micb";

		wsa-dai-link {
			link-name = "WSA Playback";

			codec {
				sound-dai = <&left_spkr>, <&right_spkr>,
					    <&swr0 0>, <&lpass_wsamacro 0>;
			};

			cpu {
				sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>;
			};

			platform {
				sound-dai = <&q6apm>;
			};
		};

		va-dai-link {
			link-name = "VA Capture";

			codec {
				sound-dai = <&lpass_vamacro 0>;
			};

			cpu {
				sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>;
			};

			platform {
				sound-dai = <&q6apm>;
			};
		};
	};

	wcn7850-pmu {
		compatible = "qcom,wcn7850-pmu";

		pinctrl-0 = <&wlan_en>, <&bt_default>, <&sw_ctrl_default>,
			    <&pmk8550_sleep_clk>;
		pinctrl-names = "default";

		wlan-enable-gpios = <&tlmm 80 GPIO_ACTIVE_HIGH>;
		bt-enable-gpios = <&tlmm 81 GPIO_ACTIVE_HIGH>;
		swctrl-gpios = <&tlmm 82 GPIO_ACTIVE_HIGH>;

		vdd-supply = <&vreg_s5g_0p85>;
		vddio-supply = <&vreg_l15b_1p8>;
		vddaon-supply = <&vreg_s2g_0p852>;
		vdddig-supply = <&vreg_s4e_0p95>;
		vddrfa1p2-supply = <&vreg_s4g_1p25>;
		vddrfa1p8-supply = <&vreg_s6g_1p86>;

		regulators {
			vreg_pmu_rfa_cmn: ldo0 {
				regulator-name = "vreg_pmu_rfa_cmn";
			};

			vreg_pmu_aon_0p59: ldo1 {
				regulator-name = "vreg_pmu_aon_0p59";
			};

			vreg_pmu_wlcx_0p8: ldo2 {
				regulator-name = "vreg_pmu_wlcx_0p8";
			};

			vreg_pmu_wlmx_0p85: ldo3 {
				regulator-name = "vreg_pmu_wlmx_0p85";
			};

			vreg_pmu_btcmx_0p85: ldo4 {
				regulator-name = "vreg_pmu_btcmx_0p85";
			};

			vreg_pmu_rfa_0p8: ldo5 {
				regulator-name = "vreg_pmu_rfa_0p8";
			};

			vreg_pmu_rfa_1p2: ldo6 {
				regulator-name = "vreg_pmu_rfa_1p2";
			};

			vreg_pmu_rfa_1p8: ldo7 {
				regulator-name = "vreg_pmu_rfa_1p8";
			};

			vreg_pmu_pcie_0p9: ldo8 {
				regulator-name = "vreg_pmu_pcie_0p9";
			};

			vreg_pmu_pcie_1p8: ldo9 {
				regulator-name = "vreg_pmu_pcie_1p8";
			};
		};
	};
};

&apps_rsc {
	regulators-0 {
		compatible = "qcom,pm8550-rpmh-regulators";
		qcom,pmic-id = "b";

		vdd-bob1-supply = <&vph_pwr>;
		vdd-bob2-supply = <&vph_pwr>;
		vdd-l1-l4-l10-supply = <&vreg_s6g_1p86>;
		vdd-l2-l13-l14-supply = <&vreg_bob1>;
		vdd-l3-supply = <&vreg_s4g_1p25>;
		vdd-l5-l16-supply = <&vreg_bob1>;
		vdd-l6-l7-supply = <&vreg_bob1>;
		vdd-l8-l9-supply = <&vreg_bob1>;
		vdd-l11-supply = <&vreg_s4g_1p25>;
		vdd-l12-supply = <&vreg_s6g_1p86>;
		vdd-l15-supply = <&vreg_s6g_1p86>;
		vdd-l17-supply = <&vreg_bob2>;

		vreg_bob1: bob1 {
			regulator-name = "vreg_bob1";
			regulator-min-microvolt = <3296000>;
			regulator-max-microvolt = <3960000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_bob2: bob2 {
			regulator-name = "vreg_bob2";
			regulator-min-microvolt = <2720000>;
			regulator-max-microvolt = <3960000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l1b_1p8: ldo1 {
			regulator-name = "vreg_l1b_1p8";
			regulator-min-microvolt = <1710000>;
			regulator-max-microvolt = <1950000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l2b_3p0: ldo2 {
			regulator-name = "vreg_l2b_3p0";
			regulator-min-microvolt = <2900000>;
			regulator-max-microvolt = <3544000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l5b_3p1: ldo5 {
			regulator-name = "vreg_l5b_3p1";
			regulator-min-microvolt = <3000000>;
			regulator-max-microvolt = <3300000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l6b_1p8: ldo6 {
			regulator-name = "vreg_l6b_1p8";
			regulator-min-microvolt = <1700000>;
			regulator-max-microvolt = <3300000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l7b_1p8: ldo7 {
			regulator-name = "vreg_l7b_1p8";
			regulator-min-microvolt = <1700000>;
			regulator-max-microvolt = <3300000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l8b_1p8: ldo8 {
			regulator-name = "vreg_l8b_1p8";
			regulator-min-microvolt = <1800000>;
			regulator-max-microvolt = <3008000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l9b_2p9: ldo9 {
			regulator-name = "vreg_l9b_2p9";
			regulator-min-microvolt = <2960000>;
			regulator-max-microvolt = <3008000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l11b_1p2: ldo11 {
			regulator-name = "vreg_l11b_1p2";
			regulator-min-microvolt = <1100000>;
			regulator-max-microvolt = <1300000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l12b_1p8: ldo12 {
			regulator-name = "vreg_l12b_1p8";
			regulator-min-microvolt = <1710000>;
			regulator-max-microvolt = <1950000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l13b_3p0: ldo13 {
			regulator-name = "vreg_l13b_3p0";
			regulator-min-microvolt = <2700000>;
			regulator-max-microvolt = <3300000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l14b_3p2: ldo14 {
			regulator-name = "vreg_l14b_3p2";
			regulator-min-microvolt = <3200000>;
			regulator-max-microvolt = <3300000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
			regulator-always-on;
		};

		vreg_l15b_1p8: ldo15 {
			regulator-name = "vreg_l15b_1p8";
			regulator-min-microvolt = <1760000>;
			regulator-max-microvolt = <1800000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l16b_2p8: ldo16 {
			regulator-name = "vreg_l16b_2p8";
			regulator-min-microvolt = <2000000>;
			regulator-max-microvolt = <3400000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l17b_2p5: ldo17 {
			regulator-name = "vreg_l17b_2p5";
			regulator-min-microvolt = <2400000>;
			regulator-max-microvolt = <3300000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};
	};

	regulators-1 {
		compatible = "qcom,pm8550vs-rpmh-regulators";
		qcom,pmic-id = "c";

		vdd-l1-supply = <&vreg_s4g_1p25>;
		vdd-l2-supply = <&vreg_s4e_0p95>;
		vdd-l3-supply = <&vreg_s4e_0p95>;
		vdd-s1-supply = <&vph_pwr>;
		vdd-s4-supply = <&vph_pwr>;
		vdd-s6-supply = <&vph_pwr>;

		vreg_l3c_0p9: ldo3 {
			regulator-name = "vreg_l3c_0p9";
			regulator-min-microvolt = <835000>;
			regulator-max-microvolt = <912000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};
	};

	regulators-2 {
		compatible = "qcom,pm8550vs-rpmh-regulators";
		qcom,pmic-id = "d";

		vdd-l1-supply = <&vreg_s4e_0p95>;
		vdd-l2-supply = <&vreg_s4e_0p95>;
		vdd-s4-supply = <&vph_pwr>;
		vdd-s5-supply = <&vph_pwr>;

		vreg_l1d_0p88: ldo1 {
			regulator-name = "vreg_l1d_0p88";
			regulator-min-microvolt = <825000>;
			regulator-max-microvolt = <958000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l2d_0p752: ldo2 {
			regulator-name = "vreg_l2d_0p752";
			regulator-min-microvolt = <675000>;
			regulator-max-microvolt = <808000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_s4d_0p628: smps4 {
			regulator-name = "vreg_s4d_0p628";
			regulator-min-microvolt = <572000>;
			regulator-max-microvolt = <988000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_s5d_0p728: smps5 {
			regulator-name = "vreg_s5d_0p728";
			regulator-min-microvolt = <572000>;
			regulator-max-microvolt = <988000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};
	};

	regulators-3 {
		compatible = "qcom,pm8550vs-rpmh-regulators";
		qcom,pmic-id = "e";

		vdd-l1-supply = <&vreg_s4e_0p95>;
		vdd-l2-supply = <&vreg_s4e_0p95>;
		vdd-l3-supply = <&vreg_s4g_1p25>;
		vdd-s1-supply = <&vph_pwr>;
		vdd-s3-supply = <&vph_pwr>;
		vdd-s4-supply = <&vph_pwr>;
		vdd-s5-supply = <&vph_pwr>;
		vdd-s6-supply = <&vph_pwr>;

		vreg_l1e_0p88: ldo1 {
			regulator-name = "vreg_l1e_0p88";
			regulator-min-microvolt = <831000>;
			regulator-max-microvolt = <904000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l2e_0p9: ldo2 {
			regulator-name = "vreg_l2e_0p9";
			regulator-min-microvolt = <870000>;
			regulator-max-microvolt = <970000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l3e_1p2: ldo3 {
			regulator-name = "vreg_l3e_1p2";
			regulator-min-microvolt = <1200000>;
			regulator-max-microvolt = <1200000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_s1e_0p72: smps1 {
			regulator-name = "vreg_s1e_0p72";
			regulator-min-microvolt = <532000>;
			regulator-max-microvolt = <852000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_s3e_0p75: smps3 {
			regulator-name = "vreg_s3e_0p75";
			regulator-min-microvolt = <716000>;
			regulator-max-microvolt = <884000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_s4e_0p95: smps4 {
			regulator-name = "vreg_s4e_0p95";
			regulator-min-microvolt = <870100>;
			regulator-max-microvolt = <1152000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_s5e_1p08: smps5 {
			regulator-name = "vreg_s5e_1p08";
			regulator-min-microvolt = <1010000>;
			regulator-max-microvolt = <1120000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_s6e_0p728: smps6 {
			regulator-name = "vreg_s6e_0p728";
			regulator-min-microvolt = <528000>;
			regulator-max-microvolt = <904000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};
	};

	regulators-4 {
		compatible = "qcom,pm8550ve-rpmh-regulators";
		qcom,pmic-id = "f";

		vdd-l1-supply = <&vreg_s4e_0p95>;
		vdd-l2-supply = <&vreg_s4e_0p95>;
		vdd-l3-supply = <&vreg_s4e_0p95>;
		vdd-s1-supply = <&vph_pwr>;
		vdd-s3-supply = <&vph_pwr>;
		vdd-s4-supply = <&vph_pwr>;
		vdd-s5-supply = <&vph_pwr>;
		vdd-s7-supply = <&vph_pwr>;

		vreg_l1f_0p9: ldo1 {
			regulator-name = "vreg_l1f_0p9";
			regulator-min-microvolt = <866000>;
			regulator-max-microvolt = <958000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l2f_0p88: ldo2 {
			regulator-name = "vreg_l2f_0p88";
			regulator-min-microvolt = <866000>;
			regulator-max-microvolt = <880000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l3f_0p88: ldo3 {
			regulator-name = "vreg_l3f_0p88";
			regulator-min-microvolt = <830000>;
			regulator-max-microvolt = <920000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_s1f_0p728: smps1 {
			regulator-name = "vreg_s1f_0p728";
			regulator-min-microvolt = <516000>;
			regulator-max-microvolt = <904000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_s3f_0p852: smps3 {
			regulator-name = "vreg_s3f_0p852";
			regulator-min-microvolt = <688000>;
			regulator-max-microvolt = <952000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_s4f_0p5: smps4 {
			regulator-name = "vreg_s4f_0p5";
			regulator-min-microvolt = <300000>;
			regulator-max-microvolt = <500000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_s5f_0p752: smps5 {
			regulator-name = "vreg_s5f_0p752";
			regulator-min-microvolt = <716000>;
			regulator-max-microvolt = <884000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_s7f_0p628: smps7 {
			regulator-name = "vreg_s7f_0p628";
			regulator-min-microvolt = <516000>;
			regulator-max-microvolt = <812000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};
	};

	regulators-5 {
		compatible = "qcom,pm8550vs-rpmh-regulators";
		qcom,pmic-id = "g";

		vdd-l1-supply = <&vreg_s4g_1p25>;
		vdd-l2-supply = <&vreg_s4g_1p25>;
		vdd-l3-supply = <&vreg_s4g_1p25>;
		vdd-s1-supply = <&vph_pwr>;
		vdd-s2-supply = <&vph_pwr>;
		vdd-s3-supply = <&vph_pwr>;
		vdd-s4-supply = <&vph_pwr>;
		vdd-s5-supply = <&vph_pwr>;
		vdd-s6-supply = <&vph_pwr>;

		vreg_l1g_1p2: ldo1 {
			regulator-name = "vreg_l1g_1p2";
			regulator-min-microvolt = <1140000>;
			regulator-max-microvolt = <1260000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l3g_1p2: ldo3 {
			regulator-name = "vreg_l3g_1p2";
			regulator-min-microvolt = <1200000>;
			regulator-max-microvolt = <1200000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_s1g_1p256: smps1 {
			regulator-name = "vreg_s1g_1p256";
			regulator-min-microvolt = <1172000>;
			regulator-max-microvolt = <1388000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_s2g_0p852: smps2 {
			regulator-name = "vreg_s2g_0p852";
			regulator-min-microvolt = <500000>;
			regulator-max-microvolt = <1053200>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_s3g_0p752: smps3 {
			regulator-name = "vreg_s3g_0p752";
			regulator-min-microvolt = <532000>;
			regulator-max-microvolt = <1148000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_s4g_1p25: smps4 {
			regulator-name = "vreg_s4g_1p25";
			regulator-min-microvolt = <1172000>;
			regulator-max-microvolt = <1800000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_s5g_0p85: smps5 {
			regulator-name = "vreg_s5g_0p85";
			regulator-min-microvolt = <800000>;
			regulator-max-microvolt = <1002600>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_s6g_1p86: smps6 {
			regulator-name = "vreg_s6g_1p86";
			regulator-min-microvolt = <1800000>;
			regulator-max-microvolt = <2192000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};
	};

	regulators-6 {
		compatible = "qcom,pm8010-rpmh-regulators";

		vdd-l1-l2-supply = <&vreg_s4g_1p25>;
		vdd-l3-l4-supply = <&vreg_bob2>;
		vdd-l5-supply = <&vreg_s6g_1p86>;
		vdd-l6-supply = <&vreg_s6g_1p86>;
		vdd-l7-supply = <&vreg_bob1>;

		qcom,pmic-id = "m";

		vreg_l1m_1p056: ldo1 {
			regulator-name = "vreg_l1m_1p056";
			regulator-min-microvolt = <1056000>;
			regulator-max-microvolt = <1056000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
			regulator-allow-set-load;
			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
						   RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l2m_1p056: ldo2 {
			regulator-name = "vreg_l2m_1p056";
			regulator-min-microvolt = <1056000>;
			regulator-max-microvolt = <1056000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
			regulator-allow-set-load;
			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
						   RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l3m_2p8: ldo3 {
			regulator-name = "vreg_l3m_2p8";
			regulator-min-microvolt = <2800000>;
			regulator-max-microvolt = <2800000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l4m_2p8: ldo4 {
			regulator-name = "vreg_l4m_2p8";
			regulator-min-microvolt = <2800000>;
			regulator-max-microvolt = <2800000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l5m_1p8: ldo5 {
			regulator-name = "vreg_l5m_1p8";
			regulator-min-microvolt = <1800000>;
			regulator-max-microvolt = <1800000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l6m_1p8: ldo6 {
			regulator-name = "vreg_l6m_1p8";
			regulator-min-microvolt = <1800000>;
			regulator-max-microvolt = <1800000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l7m_2p9: ldo7 {
			regulator-name = "vreg_l7m_2p9";
			regulator-min-microvolt = <2800000>;
			regulator-max-microvolt = <2904000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};
	};

	regulators-7 {
		compatible = "qcom,pm8010-rpmh-regulators";

		vdd-l1-l2-supply = <&vreg_s4g_1p25>;
		vdd-l3-l4-supply = <&vreg_bob2>;
		vdd-l5-supply = <&vreg_s6g_1p86>;
		vdd-l6-supply = <&vreg_bob1>;
		vdd-l7-supply = <&vreg_bob1>;

		qcom,pmic-id = "n";

		vreg_l1n_1p1: ldo1 {
			regulator-name = "vreg_l1n_1p1";
			regulator-min-microvolt = <1104000>;
			regulator-max-microvolt = <1200000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
			regulator-allow-set-load;
			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
						   RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l2n_1p1: ldo2 {
			regulator-name = "vreg_l2n_1p1";
			regulator-min-microvolt = <1104000>;
			regulator-max-microvolt = <1200000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
			regulator-allow-set-load;
			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
						   RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l3n_2p8: ldo3 {
			regulator-name = "vreg_l3n_2p8";
			regulator-min-microvolt = <2800000>;
			regulator-max-microvolt = <3000000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l4n_2p8: ldo4 {
			regulator-name = "vreg_l4n_2p8";
			regulator-min-microvolt = <2800000>;
			regulator-max-microvolt = <3300000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l5n_1p8: ldo5 {
			regulator-name = "vreg_l5n_1p8";
			regulator-min-microvolt = <1800000>;
			regulator-max-microvolt = <1800000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l6n_3p3: ldo6 {
			regulator-name = "vreg_l6n_3p3";
			regulator-min-microvolt = <3200000>;
			regulator-max-microvolt = <3200000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l7n_2p96: ldo7 {
			regulator-name = "vreg_l7n_2p96";
			regulator-min-microvolt = <2800000>;
			regulator-max-microvolt = <2960000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};
	};
};

&gpi_dma1 {
	status = "okay";
};

&gpi_dma2 {
	status = "okay";
};

&gpu {
	status = "okay";
};

&gpu_zap_shader {
	firmware-name = "qcom/sm8550/a740_zap.mbn";
};

&i2c_hub_2 {
	clock-frequency = <100000>;

	status = "okay";

	typec-mux@1c {
		compatible = "onnn,nb7vpq904m";
		reg = <0x1c>;

		vcc-supply = <&vreg_l15b_1p8>;

		retimer-switch;
		orientation-switch;

		ports {
			#address-cells = <1>;
			#size-cells = <0>;

			port@0 {
				reg = <0>;

				redriver_usb_con_ss: endpoint {
					remote-endpoint = <&pmic_glink_ss_in>;
				};
			};

			port@1 {
				reg = <1>;

				redriver_phy_con_ss: endpoint {
					remote-endpoint = <&usb_dp_qmpphy_out>;
					data-lanes = <0 1 2 3>;
				};
			};

			port@2 {
				reg = <2>;

				redriver_usb_con_sbu: endpoint {
					remote-endpoint = <&pmic_glink_sbu_in>;
				};
			};
		};
	};
};

&i2c_hub_3_gpio {
	clock-frequency = <400000>;

	status = "okay";

	lt9611_codec: hdmi-bridge@2b {
		compatible = "lontium,lt9611uxc";
		reg = <0x2b>;

		interrupts-extended = <&tlmm 40 IRQ_TYPE_EDGE_FALLING>;
		reset-gpios = <&tlmm 7 GPIO_ACTIVE_HIGH>;

		vdd-supply = <&lt9611_1v2>;
		vcc-supply = <&lt9611_3v3>;

		pinctrl-0 = <&lt9611_irq_pin>, <&lt9611_rst_pin>;
		pinctrl-names = "default";

		ports {
			#address-cells = <1>;
			#size-cells = <0>;

			port@0 {
				reg = <0>;

				lt9611_a: endpoint {
					remote-endpoint = <&mdss_dsi0_out>;
				};
			};

			port@2 {
				reg = <2>;

				lt9611_out: endpoint {
					remote-endpoint = <&hdmi_con>;
				};
			};
		};
	};
};

&i2c_hub_4 {
	status = "okay";
};

&i2c_master_hub_0 {
	status = "okay";
};

&ipa {
	firmware-name = "qcom/sm8550/ipa_fws.mbn";

	status = "okay";
};

&iris {
	status = "okay";
};

&lpass_vamacro {
	pinctrl-0 = <&dmic01_default>;
	pinctrl-names = "default";

	qcom,dmic-sample-rate = <4800000>;

	vdd-micb-supply = <&vreg_l15b_1p8>;
};

&mdss {
	status = "okay";
};

&mdss_dsi0 {
	vdda-supply = <&vreg_l3e_1p2>;

	status = "okay";
};

&mdss_dsi0_out {
	remote-endpoint = <&lt9611_a>;
	data-lanes = <0 1 2 3>;
};

&mdss_dsi0_phy {
	vdds-supply = <&vreg_l1e_0p88>;

	status = "okay";
};

&mdss_dp0 {
	status = "okay";
};

&pcie0 {
	vddpe-3v3-supply = <&pcie_upd_3p3>;

	wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
	perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;

	pinctrl-0 = <&pcie0_default_state>;
	pinctrl-names = "default";

	iommu-map = <0x0 &apps_smmu 0x1400 0x1>,
		    <0x100 &apps_smmu 0x1401 0x1>,
		    <0x208 &apps_smmu 0x1402 0x1>,
		    <0x210 &apps_smmu 0x1403 0x1>,
		    <0x218 &apps_smmu 0x1404 0x1>,
		    <0x300 &apps_smmu 0x1407 0x1>,
		    <0x400 &apps_smmu 0x1408 0x1>,
		    <0x500 &apps_smmu 0x140c 0x1>,
		    <0x501 &apps_smmu 0x140e 0x1>;

	/delete-property/ msi-map;

	status = "okay";
};

&pcie0_phy {
	vdda-phy-supply = <&vreg_l1e_0p88>;
	vdda-pll-supply = <&vreg_l3e_1p2>;

	status = "okay";
};

&pcie0_port0 {
	pcie@0,0 {
		compatible = "pci1179,0623";
		reg = <0x10000 0x0 0x0 0x0 0x0>;
		#address-cells = <3>;
		#size-cells = <2>;

		device_type = "pci";
		ranges;
		bus-range = <0x2 0xff>;

		vddc-supply = <&vdd_ntn_0p9>;
		vdd18-supply = <&vdd_ntn_1p8>;
		vdd09-supply = <&vdd_ntn_0p9>;
		vddio1-supply = <&vdd_ntn_1p8>;
		vddio2-supply = <&vdd_ntn_1p8>;
		vddio18-supply = <&vdd_ntn_1p8>;

		i2c-parent = <&i2c_hub_4 0x77>;

		resx-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>;

		pinctrl-0 = <&tc9563_0_rst>, <&upd_ponrst>;
		pinctrl-names = "default";

		pcie@1,0 {
			reg = <0x20800 0x0 0x0 0x0 0x0>;
			#address-cells = <3>;
			#size-cells = <2>;

			device_type = "pci";
			ranges;
			bus-range = <0x3 0xff>;
		};

		pcie@2,0 {
			reg = <0x21000 0x0 0x0 0x0 0x0>;
			#address-cells = <3>;
			#size-cells = <2>;

			device_type = "pci";
			ranges;
			bus-range = <0x4 0xff>;
		};

		pcie@3,0 {
			reg = <0x21800 0x0 0x0 0x0 0x0>;
			#address-cells = <3>;
			#size-cells = <2>;
			device_type = "pci";
			ranges;
			bus-range = <0x5 0xff>;

			pci@0,0 {
				reg = <0x50000 0x0 0x0 0x0 0x0>;
				#address-cells = <3>;
				#size-cells = <2>;
				device_type = "pci";
				ranges;
			};

			pci@0,1 {
				reg = <0x50100 0x0 0x0 0x0 0x0>;
				#address-cells = <3>;
				#size-cells = <2>;
				device_type = "pci";
				ranges;
			};
		};
	};
};

&pcie1 {
	wake-gpios = <&tlmm 99 GPIO_ACTIVE_HIGH>;
	perst-gpios = <&tlmm 97 GPIO_ACTIVE_LOW>;

	pinctrl-0 = <&pcie1_default_state>;
	pinctrl-names = "default";

	iommu-map = <0x0 &apps_smmu 0x1480 0x1>,
		    <0x100 &apps_smmu 0x1481 0x1>,
		    <0x208 &apps_smmu 0x1482 0x1>,
		    <0x210 &apps_smmu 0x1483 0x1>,
		    <0x218 &apps_smmu 0x1484 0x1>,
		    <0x300 &apps_smmu 0x1487 0x1>,
		    <0x400 &apps_smmu 0x1488 0x1>,
		    <0x500 &apps_smmu 0x148c 0x1>,
		    <0x501 &apps_smmu 0x148e 0x1>;

	/delete-property/ msi-map;

	status = "okay";
};

&pcie1_phy {
	vdda-phy-supply = <&vreg_l3c_0p9>;
	vdda-pll-supply = <&vreg_l3e_1p2>;
	vdda-qref-supply = <&vreg_l1e_0p88>;

	status = "okay";
};

&pcie1_port0 {
	pcie@0,0 {
		compatible = "pci1179,0623";
		reg = <0x10000 0x0 0x0 0x0 0x0>;
		#address-cells = <3>;
		#size-cells = <2>;

		device_type = "pci";
		ranges;
		bus-range = <0x2 0xff>;

		vddc-supply = <&vdd_ntn1_0p9>;
		vdd18-supply = <&vdd_ntn1_1p8>;
		vdd09-supply = <&vdd_ntn1_0p9>;
		vddio1-supply = <&vdd_ntn1_1p8>;
		vddio2-supply = <&vdd_ntn1_1p8>;
		vddio18-supply = <&vdd_ntn1_1p8>;

		i2c-parent = <&i2c_hub_3_gpio 0x77>;

		resx-gpios = <&tlmm 65 GPIO_ACTIVE_LOW>;

		pinctrl-0 = <&tc9563_1_rst>;
		pinctrl-names = "default";

		pcie@1,0 {
			reg = <0x20800 0x0 0x0 0x0 0x0>;
			#address-cells = <3>;
			#size-cells = <2>;

			device_type = "pci";
			ranges;
			bus-range = <0x3 0xff>;
		};

		pcie@2,0 {
			reg = <0x21000 0x0 0x0 0x0 0x0>;
			#address-cells = <3>;
			#size-cells = <2>;

			device_type = "pci";
			ranges;
			bus-range = <0x4 0xff>;

			wifi@0 {
				compatible = "pci17cb,1107";
				reg = <0x40000 0x0 0x0 0x0 0x0>;

				vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
				vddaon-supply = <&vreg_pmu_aon_0p59>;
				vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
				vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
				vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
				vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
				vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
				vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>;
				vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>;
			};
		};

		pcie@3,0 {
			reg = <0x21800 0x0 0x0 0x0 0x0>;
			#address-cells = <3>;
			#size-cells = <2>;
			device_type = "pci";
			ranges;
			bus-range = <0x5 0xff>;
		};
	};
};

&pm8550_gpios {
	volume_up_n: volume-up-n-state {
		pins = "gpio6";
		function = "normal";
		power-source = <1>;
		bias-pull-up;
		input-enable;
	};

	sdc2_card_det_n: sdc2-card-det-state {
		pins = "gpio12";
		function = "normal";
		power-source = <1>;
		bias-pull-up;
		input-enable;
	};
};

&pm8550_pwm {
	#address-cells = <1>;
	#size-cells = <0>;

	status = "okay";

	led@1 {
		reg = <1>;
		color = <LED_COLOR_ID_GREEN>;
		function = LED_FUNCTION_STATUS;
		function-enumerator = <0>;
		linux,default-trigger = "none";
		default-state = "off";
	};

	led@2 {
		reg = <2>;
		color = <LED_COLOR_ID_GREEN>;
		function = LED_FUNCTION_STATUS;
		function-enumerator = <1>;
		linux,default-trigger = "none";
		default-state = "off";
	};

	led@3 {
		reg = <3>;
		color = <LED_COLOR_ID_GREEN>;
		function = LED_FUNCTION_STATUS;
		function-enumerator = <2>;
		linux,default-trigger = "none";
		default-state = "off";
	};
};

&pm8550b_eusb2_repeater {
	vdd18-supply = <&vreg_l15b_1p8>;
	vdd3-supply = <&vreg_l5b_3p1>;
};

&pmk8550_gpios {
	pmk8550_sleep_clk: sleep-clk-state {
		pins = "gpio3";
		function = "func1";
		input-disable;
		output-enable;
		bias-disable;
		power-source = <0>;
	};
};

&pon_pwrkey {
	status = "okay";
};

&pon_resin {
	linux,code = <KEY_VOLUMEDOWN>;

	status = "okay";
};

&qupv3_id_0 {
	status = "okay";
};

&qupv3_id_1 {
	status = "okay";
};

&remoteproc_adsp {
	firmware-name = "qcom/sm8550/adsp.mbn",
			"qcom/sm8550/adsp_dtb.mbn";
	status = "okay";
};

&remoteproc_cdsp {
	firmware-name = "qcom/sm8550/cdsp.mbn",
			"qcom/sm8550/cdsp_dtb.mbn";
	status = "okay";
};

&remoteproc_mpss {
	firmware-name = "qcom/sm8550/modem.mbn",
			"qcom/sm8550/modem_dtb.mbn";
	status = "okay";
};

&sdhc_2 {
	cd-gpios = <&pm8550_gpios 12 GPIO_ACTIVE_LOW>;

	pinctrl-0 = <&sdc2_default>, <&sdc2_card_det_n>;
	pinctrl-1 = <&sdc2_sleep>, <&sdc2_card_det_n>;
	pinctrl-names = "default", "sleep";

	vmmc-supply = <&vreg_l9b_2p9>;
	vqmmc-supply = <&vreg_l8b_1p8>;

	no-sdio;
	no-mmc;

	status = "okay";
};

&sleep_clk {
	clock-frequency = <32764>;
};

&spi11 {
	status = "okay";

	can@0 {
		compatible = "microchip,mcp2518fd";
		reg = <0>;
		interrupts-extended = <&tlmm 55 IRQ_TYPE_LEVEL_LOW>;
		clocks = <&clk40m>;
		spi-max-frequency = <10000000>;
		vdd-supply = <&vreg_l14b_3p2>;
		xceiver-supply = <&vreg_l14b_3p2>;
	};
};

&swr0 {
	status = "okay";

	left_spkr: speaker@0,0 {
		compatible = "sdw20217020400";
		reg = <0 0>;

		reset-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>;

		vdd-1p8-supply = <&vreg_l15b_1p8>;
		vdd-io-supply = <&vreg_l15b_1p8>;

		#sound-dai-cells = <0>;
		sound-name-prefix = "SpkrLeft";
		qcom,port-mapping = <1 2 3 7 10 13>;
	};

	right_spkr: speaker@0,1 {
		compatible = "sdw20217020400";
		reg = <0 1>;

		reset-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>;

		vdd-1p8-supply = <&vreg_l15b_1p8>;
		vdd-io-supply = <&vreg_l15b_1p8>;

		#sound-dai-cells = <0>;
		sound-name-prefix = "SpkrRight";
		qcom,port-mapping = <4 5 6 7 11 13>;
	};
};

&tlmm {
	/* 32-35 for NFC secure element */
	/* 36-39 for fingerprint sensor */
	gpio-reserved-ranges = <32 8>;

	lt9611_rst_pin: lt9611-rst-state {
		pins = "gpio7";
		function = "gpio";
	};

	upd_3p3_en: upd-3p3-en-state {
		pins = "gpio13";
		function = "gpio";
		drive-strength = <2>;
		bias-disable;
	};

	lt9611_irq_pin: lt9611-irq-state {
		pins = "gpio40";
		function = "gpio";
		bias-disable;
	};

	ntn1_en: ntn1-en-state {
		pins = "gpio42";
		function = "gpio";
		drive-strength = <2>;
		bias-disable;
	};

	tc9563_0_rst: tc9563-0-rst-state {
		pins = "gpio64";
		function = "gpio";
		drive-strength = <2>;
		bias-disable;
	};

	tc9563_1_rst: tc9563-1-rst-state {
		pins = "gpio65";
		function = "gpio";
		drive-strength = <2>;
		bias-disable;
	};

	ntn0_en: ntn0-en-state {
		pins = "gpio67";
		function = "gpio";
		drive-strength = <2>;
		bias-disable;
	};

	wlan_en: wlan-en-state {
		pins = "gpio80";
		function = "gpio";
		drive-strength = <8>;
		bias-pull-down;
	};

	bt_default: bt-default-state {
		pins = "gpio81";
		function = "gpio";
		drive-strength = <16>;
		bias-disable;
	};

	sw_ctrl_default: sw-ctrl-default-state {
		pins = "gpio82";
		function = "gpio";
		bias-pull-down;
	};

	upd_1p05_en: upd-1p05-en-state {
		pins = "gpio179";
		function = "gpio";
		drive-strength = <2>;
		bias-disable;
	};

	upd_ponrst: upd-ponrst-state {
		pins = "gpio182";
		function = "gpio";
		drive-strength = <2>;
		output-high;
	};
};

&uart7 {
	status = "okay";
};

&uart14 {
	status = "okay";

	bluetooth {
		compatible = "qcom,wcn7850-bt";

		vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
		vddaon-supply = <&vreg_pmu_aon_0p59>;
		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
		vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
		vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
	};
};

&ufs_mem_hc {
	reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>;
	vcc-supply = <&vreg_l17b_2p5>;
	vcc-max-microamp = <1300000>;
	vccq-supply = <&vreg_l1g_1p2>;
	vccq-max-microamp = <1200000>;
	vdd-hba-supply = <&vreg_l3g_1p2>;

	status = "okay";
};

&ufs_mem_phy {
	vdda-phy-supply = <&vreg_l1d_0p88>;
	vdda-pll-supply = <&vreg_l3e_1p2>;

	status = "okay";
};

&usb_1 {
	status = "okay";
};

&usb_1_dwc3_hs {
	remote-endpoint = <&pmic_glink_hs_in>;
};

&usb_1_hsphy {
	vdd-supply = <&vreg_l1e_0p88>;
	vdda12-supply = <&vreg_l3e_1p2>;

	phys = <&pm8550b_eusb2_repeater>;

	status = "okay";
};

&usb_dp_qmpphy {
	vdda-phy-supply = <&vreg_l3e_1p2>;
	vdda-pll-supply = <&vreg_l3f_0p88>;

	status = "okay";
};

&usb_dp_qmpphy_out {
	remote-endpoint = <&redriver_phy_con_ss>;
};

&xo_board {
	clock-frequency = <76800000>;
};