1// SPDX-License-Identifier: BSD-3-Clause 2/* 3 * Copyright (c) 2021, Linaro Limited 4 */ 5 6#include <dt-bindings/input/input.h> 7#include <dt-bindings/interrupt-controller/irq.h> 8#include <dt-bindings/spmi/spmi.h> 9 10/ { 11 thermal-zones { 12 pmm8155au-2-thermal { 13 polling-delay-passive = <100>; 14 polling-delay = <0>; 15 16 thermal-sensors = <&pmm8155au_2_temp>; 17 18 trips { 19 trip0 { 20 temperature = <95000>; 21 hysteresis = <0>; 22 type = "passive"; 23 }; 24 25 trip1 { 26 temperature = <115000>; 27 hysteresis = <0>; 28 type = "hot"; 29 }; 30 31 trip2 { 32 temperature = <145000>; 33 hysteresis = <0>; 34 type = "critical"; 35 }; 36 }; 37 }; 38 }; 39}; 40 41&spmi_bus { 42 pmic@4 { 43 compatible = "qcom,pmm8155au", "qcom,spmi-pmic"; 44 reg = <0x4 SPMI_USID>; 45 #address-cells = <1>; 46 #size-cells = <0>; 47 48 power-on@800 { 49 compatible = "qcom,pm8916-pon"; 50 reg = <0x0800>; 51 52 status = "disabled"; 53 }; 54 55 pmm8155au_2_temp: temp-alarm@2400 { 56 compatible = "qcom,spmi-temp-alarm"; 57 reg = <0x2400>; 58 interrupts = <0x4 0x24 0x0 IRQ_TYPE_EDGE_BOTH>; 59 io-channels = <&pmm8155au_2_adc ADC5_DIE_TEMP>; 60 io-channel-names = "thermal"; 61 #thermal-sensor-cells = <0>; 62 }; 63 64 pmm8155au_2_adc: adc@3100 { 65 compatible = "qcom,spmi-adc5"; 66 reg = <0x3100>; 67 #address-cells = <1>; 68 #size-cells = <0>; 69 #io-channel-cells = <1>; 70 interrupts = <0x4 0x31 0x0 IRQ_TYPE_EDGE_RISING>; 71 72 ref-gnd@0 { 73 reg = <ADC5_REF_GND>; 74 qcom,pre-scaling = <1 1>; 75 label = "ref_gnd"; 76 }; 77 78 vref-1p25@1 { 79 reg = <ADC5_1P25VREF>; 80 qcom,pre-scaling = <1 1>; 81 label = "vref_1p25"; 82 }; 83 84 die-temp@6 { 85 reg = <ADC5_DIE_TEMP>; 86 qcom,pre-scaling = <1 1>; 87 label = "die_temp"; 88 }; 89 }; 90 91 pmm8155au_2_gpios: gpio@c000 { 92 compatible = "qcom,pmm8155au-gpio"; 93 reg = <0xc000>; 94 gpio-controller; 95 #gpio-cells = <2>; 96 gpio-ranges = <&pmm8155au_2_gpios 0 0 10>; 97 interrupt-controller; 98 #interrupt-cells = <2>; 99 }; 100 }; 101 102 pmic@5 { 103 compatible = "qcom,pmm8155au", "qcom,spmi-pmic"; 104 reg = <0x5 SPMI_USID>; 105 #address-cells = <1>; 106 #size-cells = <0>; 107 }; 108}; 109