xref: /linux/arch/arm64/boot/dts/qcom/pmi8950.dtsi (revision 8e07e0e3964ca4e23ce7b68e2096fe660a888942)
1// SPDX-License-Identifier: GPL-2.0
2// Copyright (c) 2019, AngeloGioacchino Del Regno <kholk11@gmail.com>
3
4#include <dt-bindings/iio/qcom,spmi-vadc.h>
5#include <dt-bindings/interrupt-controller/irq.h>
6#include <dt-bindings/spmi/spmi.h>
7
8&spmi_bus {
9	pmic@2 {
10		compatible = "qcom,pmi8950", "qcom,spmi-pmic";
11		reg = <0x2 SPMI_USID>;
12		#address-cells = <1>;
13		#size-cells = <0>;
14
15		pmi8950_vadc: adc@3100 {
16			compatible = "qcom,spmi-vadc";
17			reg = <0x3100>;
18			interrupts = <0x2 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
19			#address-cells = <1>;
20			#size-cells = <0>;
21			#io-channel-cells = <1>;
22
23			channel@0 {
24				reg = <VADC_USBIN>;
25				qcom,pre-scaling = <1 4>;
26				label = "usbin";
27			};
28
29			channel@1 {
30				reg = <VADC_DCIN>;
31				qcom,pre-scaling = <1 4>;
32				label = "dcin";
33			};
34
35			channel@2 {
36				reg = <VADC_VCHG_SNS>;
37				qcom,pre-scaling = <1 1>;
38				label = "vchg_sns";
39			};
40
41			channel@9 {
42				reg = <VADC_REF_625MV>;
43				qcom,pre-scaling = <1 1>;
44				label = "ref_625mv";
45			};
46
47			channel@a {
48				reg = <VADC_REF_1250MV>;
49				qcom,pre-scaling = <1 1>;
50				label = "ref_1250mv";
51			};
52
53			channel@d {
54				reg = <VADC_SPARE2>;
55				qcom,pre-scaling = <1 1>;
56				label = "chg_temp";
57			};
58		};
59
60		pmi8950_mpps: mpps@a000 {
61			compatible = "qcom,pmi8950-mpp", "qcom,spmi-mpp";
62			reg = <0xa000>;
63			gpio-controller;
64			gpio-ranges = <&pmi8950_mpps 0 0 4>;
65			#gpio-cells = <2>;
66			interrupt-controller;
67			#interrupt-cells = <2>;
68		};
69
70		pmi8950_gpios: gpio@c000 {
71			compatible = "qcom,pmi8950-gpio", "qcom,spmi-gpio";
72			reg = <0xc000>;
73			gpio-controller;
74			gpio-ranges = <&pmi8950_gpios 0 0 2>;
75			#gpio-cells = <2>;
76			interrupt-controller;
77			#interrupt-cells = <2>;
78		};
79	};
80
81	pmic@3 {
82		compatible = "qcom,pmi8950", "qcom,spmi-pmic";
83		reg = <0x3 SPMI_USID>;
84		#address-cells = <1>;
85		#size-cells = <0>;
86
87		pmi8950_wled: leds@d800 {
88			compatible = "qcom,pmi8950-wled";
89			reg = <0xd800>, <0xd900>;
90			interrupts = <0x3 0xd8 0x1 IRQ_TYPE_EDGE_RISING>,
91				     <0x3 0xd8 0x2 IRQ_TYPE_EDGE_RISING>;
92			interrupt-names = "ovp", "short";
93			label = "backlight";
94
95			status = "disabled";
96		};
97	};
98};
99