1// SPDX-License-Identifier: GPL-2.0 2// Copyright (c) 2019, AngeloGioacchino Del Regno <kholk11@gmail.com> 3 4#include <dt-bindings/iio/qcom,spmi-vadc.h> 5#include <dt-bindings/interrupt-controller/irq.h> 6#include <dt-bindings/spmi/spmi.h> 7 8&spmi_bus { 9 pmic@2 { 10 compatible = "qcom,pmi8950", "qcom,spmi-pmic"; 11 reg = <0x2 SPMI_USID>; 12 #address-cells = <1>; 13 #size-cells = <0>; 14 15 pmi8950_vadc: adc@3100 { 16 compatible = "qcom,spmi-vadc"; 17 reg = <0x3100>; 18 interrupts = <0x2 0x31 0x0 IRQ_TYPE_EDGE_RISING>; 19 #address-cells = <1>; 20 #size-cells = <0>; 21 #io-channel-cells = <1>; 22 23 channel@0 { 24 reg = <VADC_USBIN>; 25 qcom,pre-scaling = <1 4>; 26 label = "usbin"; 27 }; 28 29 channel@1 { 30 reg = <VADC_DCIN>; 31 qcom,pre-scaling = <1 4>; 32 label = "dcin"; 33 }; 34 35 channel@2 { 36 reg = <VADC_VCHG_SNS>; 37 qcom,pre-scaling = <1 1>; 38 label = "vchg_sns"; 39 }; 40 41 channel@9 { 42 reg = <VADC_REF_625MV>; 43 qcom,pre-scaling = <1 1>; 44 label = "ref_625mv"; 45 }; 46 47 channel@a { 48 reg = <VADC_REF_1250MV>; 49 qcom,pre-scaling = <1 1>; 50 label = "ref_1250mv"; 51 }; 52 53 channel@d { 54 reg = <VADC_SPARE2>; 55 qcom,pre-scaling = <1 1>; 56 label = "chg_temp"; 57 }; 58 }; 59 60 pmi8950_mpps: mpps@a000 { 61 compatible = "qcom,pmi8950-mpp", "qcom,spmi-mpp"; 62 reg = <0xa000>; 63 gpio-controller; 64 gpio-ranges = <&pmi8950_mpps 0 0 4>; 65 #gpio-cells = <2>; 66 interrupt-controller; 67 #interrupt-cells = <2>; 68 }; 69 70 pmi8950_gpios: gpio@c000 { 71 compatible = "qcom,pmi8950-gpio", "qcom,spmi-gpio"; 72 reg = <0xc000>; 73 gpio-controller; 74 gpio-ranges = <&pmi8950_gpios 0 0 2>; 75 #gpio-cells = <2>; 76 interrupt-controller; 77 #interrupt-cells = <2>; 78 }; 79 }; 80 81 pmic@3 { 82 compatible = "qcom,pmi8950", "qcom,spmi-pmic"; 83 reg = <0x3 SPMI_USID>; 84 #address-cells = <1>; 85 #size-cells = <0>; 86 87 pmi8950_pwm: pwm { 88 compatible = "qcom,pmi8950-pwm"; 89 #pwm-cells = <2>; 90 91 status = "disabled"; 92 }; 93 94 pmi8950_wled: leds@d800 { 95 compatible = "qcom,pmi8950-wled"; 96 reg = <0xd800>, <0xd900>; 97 interrupts = <0x3 0xd8 0x1 IRQ_TYPE_EDGE_RISING>, 98 <0x3 0xd8 0x2 IRQ_TYPE_EDGE_RISING>; 99 interrupt-names = "ovp", "short"; 100 label = "backlight"; 101 102 status = "disabled"; 103 }; 104 }; 105}; 106