1// SPDX-License-Identifier: BSD-3-Clause 2/* 3 * Copyright (C) 2023 Luca Weiss <luca@z3ntu.xyz> 4 */ 5 6#include <dt-bindings/iio/qcom,spmi-vadc.h> 7#include <dt-bindings/interrupt-controller/irq.h> 8#include <dt-bindings/spmi/spmi.h> 9 10/ { 11 thermal-zones { 12 pmi632-thermal { 13 polling-delay-passive = <100>; 14 polling-delay = <0>; 15 16 thermal-sensors = <&pmi632_temp>; 17 18 trips { 19 trip0 { 20 temperature = <95000>; 21 hysteresis = <0>; 22 type = "passive"; 23 }; 24 25 trip1 { 26 temperature = <115000>; 27 hysteresis = <0>; 28 type = "hot"; 29 }; 30 31 trip2 { 32 temperature = <125000>; 33 hysteresis = <0>; 34 type = "critical"; 35 }; 36 }; 37 }; 38 }; 39}; 40 41&spmi_bus { 42 pmic@2 { 43 compatible = "qcom,pmi632", "qcom,spmi-pmic"; 44 reg = <0x2 SPMI_USID>; 45 #address-cells = <1>; 46 #size-cells = <0>; 47 48 pmi632_temp: temp-alarm@2400 { 49 compatible = "qcom,spmi-temp-alarm"; 50 reg = <0x2400>; 51 interrupts = <0x2 0x24 0x0 IRQ_TYPE_EDGE_BOTH>; 52 #thermal-sensor-cells = <0>; 53 }; 54 55 pmi632_adc: adc@3100 { 56 compatible = "qcom,spmi-adc5"; 57 reg = <0x3100>; 58 #address-cells = <1>; 59 #size-cells = <0>; 60 #io-channel-cells = <1>; 61 interrupts = <0x2 0x31 0x0 IRQ_TYPE_EDGE_RISING>; 62 63 channel@0 { 64 reg = <ADC5_REF_GND>; 65 qcom,pre-scaling = <1 1>; 66 label = "ref_gnd"; 67 }; 68 69 channel@1 { 70 reg = <ADC5_1P25VREF>; 71 qcom,pre-scaling = <1 1>; 72 label = "vref_1p25"; 73 }; 74 75 channel@6 { 76 reg = <ADC5_DIE_TEMP>; 77 qcom,pre-scaling = <1 1>; 78 label = "die_temp"; 79 }; 80 81 channel@7 { 82 reg = <ADC5_USB_IN_I>; 83 qcom,pre-scaling = <1 1>; 84 label = "usb_in_i_uv"; 85 }; 86 87 channel@8 { 88 reg = <ADC5_USB_IN_V_16>; 89 qcom,pre-scaling = <1 16>; 90 label = "usb_in_v_div_16"; 91 }; 92 93 channel@9 { 94 reg = <ADC5_CHG_TEMP>; 95 qcom,pre-scaling = <1 1>; 96 label = "chg_temp"; 97 }; 98 99 channel@4b { 100 reg = <ADC5_BAT_ID_100K_PU>; 101 qcom,hw-settle-time = <200>; 102 qcom,pre-scaling = <1 1>; 103 qcom,ratiometric; 104 label = "bat_id"; 105 }; 106 107 channel@83 { 108 reg = <ADC5_VPH_PWR>; 109 qcom,pre-scaling = <1 3>; 110 label = "vph_pwr"; 111 }; 112 113 channel@84 { 114 reg = <ADC5_VBAT_SNS>; 115 qcom,pre-scaling = <1 3>; 116 label = "vbat_sns"; 117 }; 118 }; 119 120 pmi632_adc_tm: adc-tm@3500 { 121 compatible = "qcom,spmi-adc-tm5"; 122 reg = <0x3500>; 123 interrupts = <0x2 0x35 0x0 IRQ_TYPE_EDGE_RISING>; 124 #thermal-sensor-cells = <1>; 125 #address-cells = <1>; 126 #size-cells = <0>; 127 status = "disabled"; 128 }; 129 130 pmi632_sdam_7: nvram@b600 { 131 compatible = "qcom,spmi-sdam"; 132 reg = <0xb600>; 133 #address-cells = <1>; 134 #size-cells = <1>; 135 ranges = <0 0xb600 0x100>; 136 }; 137 138 pmi632_gpios: gpio@c000 { 139 compatible = "qcom,pmi632-gpio", "qcom,spmi-gpio"; 140 reg = <0xc000>; 141 gpio-controller; 142 gpio-ranges = <&pmi632_gpios 0 0 8>; 143 #gpio-cells = <2>; 144 interrupt-controller; 145 #interrupt-cells = <2>; 146 }; 147 }; 148 149 pmic@3 { 150 compatible = "qcom,pmi632", "qcom,spmi-pmic"; 151 reg = <0x3 SPMI_USID>; 152 #address-cells = <1>; 153 #size-cells = <0>; 154 155 pmi632_lpg: pwm { 156 compatible = "qcom,pmi632-lpg"; 157 158 #address-cells = <1>; 159 #size-cells = <0>; 160 #pwm-cells = <2>; 161 162 status = "disabled"; 163 }; 164 }; 165}; 166