1// SPDX-License-Identifier: BSD-3-Clause 2/* 3 * Copyright (C) 2023 Luca Weiss <luca@z3ntu.xyz> 4 */ 5 6#include <dt-bindings/iio/qcom,spmi-vadc.h> 7#include <dt-bindings/interrupt-controller/irq.h> 8#include <dt-bindings/spmi/spmi.h> 9 10/ { 11 thermal-zones { 12 pmi632-thermal { 13 polling-delay-passive = <100>; 14 15 thermal-sensors = <&pmi632_temp>; 16 17 trips { 18 trip0 { 19 temperature = <95000>; 20 hysteresis = <0>; 21 type = "passive"; 22 }; 23 24 trip1 { 25 temperature = <115000>; 26 hysteresis = <0>; 27 type = "hot"; 28 }; 29 30 trip2 { 31 temperature = <125000>; 32 hysteresis = <0>; 33 type = "critical"; 34 }; 35 }; 36 }; 37 }; 38}; 39 40&spmi_bus { 41 pmic@2 { 42 compatible = "qcom,pmi632", "qcom,spmi-pmic"; 43 reg = <0x2 SPMI_USID>; 44 #address-cells = <1>; 45 #size-cells = <0>; 46 47 pmi632_vbus: usb-vbus-regulator@1100 { 48 compatible = "qcom,pmi632-vbus-reg", "qcom,pm8150b-vbus-reg"; 49 reg = <0x1100>; 50 status = "disabled"; 51 }; 52 53 pmi632_typec: typec@1500 { 54 compatible = "qcom,pmi632-typec"; 55 reg = <0x1500>; 56 interrupts = <0x2 0x15 0x00 IRQ_TYPE_EDGE_RISING>, 57 <0x2 0x15 0x01 IRQ_TYPE_EDGE_BOTH>, 58 <0x2 0x15 0x02 IRQ_TYPE_EDGE_RISING>, 59 <0x2 0x15 0x03 IRQ_TYPE_EDGE_BOTH>, 60 <0x2 0x15 0x04 IRQ_TYPE_EDGE_RISING>, 61 <0x2 0x15 0x05 IRQ_TYPE_EDGE_RISING>, 62 <0x2 0x15 0x06 IRQ_TYPE_EDGE_BOTH>, 63 <0x2 0x15 0x07 IRQ_TYPE_EDGE_RISING>; 64 interrupt-names = "or-rid-detect-change", 65 "vpd-detect", 66 "cc-state-change", 67 "vconn-oc", 68 "vbus-change", 69 "attach-detach", 70 "legacy-cable-detect", 71 "try-snk-src-detect"; 72 vdd-vbus-supply = <&pmi632_vbus>; 73 74 status = "disabled"; 75 }; 76 77 pmi632_temp: temp-alarm@2400 { 78 compatible = "qcom,spmi-temp-alarm"; 79 reg = <0x2400>; 80 interrupts = <0x2 0x24 0x0 IRQ_TYPE_EDGE_BOTH>; 81 #thermal-sensor-cells = <0>; 82 }; 83 84 pmi632_adc: adc@3100 { 85 compatible = "qcom,spmi-adc5"; 86 reg = <0x3100>; 87 #address-cells = <1>; 88 #size-cells = <0>; 89 #io-channel-cells = <1>; 90 interrupts = <0x2 0x31 0x0 IRQ_TYPE_EDGE_RISING>; 91 92 channel@0 { 93 reg = <ADC5_REF_GND>; 94 qcom,pre-scaling = <1 1>; 95 label = "ref_gnd"; 96 }; 97 98 channel@1 { 99 reg = <ADC5_1P25VREF>; 100 qcom,pre-scaling = <1 1>; 101 label = "vref_1p25"; 102 }; 103 104 channel@6 { 105 reg = <ADC5_DIE_TEMP>; 106 qcom,pre-scaling = <1 1>; 107 label = "die_temp"; 108 }; 109 110 channel@7 { 111 reg = <ADC5_USB_IN_I>; 112 qcom,pre-scaling = <1 1>; 113 label = "usb_in_i_uv"; 114 }; 115 116 channel@8 { 117 reg = <ADC5_USB_IN_V_16>; 118 qcom,pre-scaling = <1 16>; 119 label = "usb_in_v_div_16"; 120 }; 121 122 channel@9 { 123 reg = <ADC5_CHG_TEMP>; 124 qcom,pre-scaling = <1 1>; 125 label = "chg_temp"; 126 }; 127 128 channel@4b { 129 reg = <ADC5_BAT_ID_100K_PU>; 130 qcom,hw-settle-time = <200>; 131 qcom,pre-scaling = <1 1>; 132 qcom,ratiometric; 133 label = "bat_id"; 134 }; 135 136 channel@83 { 137 reg = <ADC5_VPH_PWR>; 138 qcom,pre-scaling = <1 3>; 139 label = "vph_pwr"; 140 }; 141 142 channel@84 { 143 reg = <ADC5_VBAT_SNS>; 144 qcom,pre-scaling = <1 3>; 145 label = "vbat_sns"; 146 }; 147 }; 148 149 pmi632_adc_tm: adc-tm@3500 { 150 compatible = "qcom,spmi-adc-tm5"; 151 reg = <0x3500>; 152 interrupts = <0x2 0x35 0x0 IRQ_TYPE_EDGE_RISING>; 153 #thermal-sensor-cells = <1>; 154 #address-cells = <1>; 155 #size-cells = <0>; 156 status = "disabled"; 157 }; 158 159 pmi632_pbs_client3: pbs@7400 { 160 compatible = "qcom,pmi632-pbs", "qcom,pbs"; 161 reg = <0x7400>; 162 }; 163 164 pmi632_sdam_7: nvram@b600 { 165 compatible = "qcom,spmi-sdam"; 166 reg = <0xb600>; 167 #address-cells = <1>; 168 #size-cells = <1>; 169 ranges = <0 0xb600 0x100>; 170 }; 171 172 pmi632_gpios: gpio@c000 { 173 compatible = "qcom,pmi632-gpio", "qcom,spmi-gpio"; 174 reg = <0xc000>; 175 gpio-controller; 176 gpio-ranges = <&pmi632_gpios 0 0 8>; 177 #gpio-cells = <2>; 178 interrupt-controller; 179 #interrupt-cells = <2>; 180 }; 181 }; 182 183 pmic@3 { 184 compatible = "qcom,pmi632", "qcom,spmi-pmic"; 185 reg = <0x3 SPMI_USID>; 186 #address-cells = <1>; 187 #size-cells = <0>; 188 189 pmi632_lpg: pwm { 190 compatible = "qcom,pmi632-lpg"; 191 192 nvmem = <&pmi632_sdam_7>; 193 nvmem-names = "lpg_chan_sdam"; 194 qcom,pbs = <&pmi632_pbs_client3>; 195 196 #address-cells = <1>; 197 #size-cells = <0>; 198 #pwm-cells = <2>; 199 200 status = "disabled"; 201 }; 202 203 pmi632_vib: vibrator@5700 { 204 compatible = "qcom,pmi632-vib"; 205 reg = <0x5700>; 206 status = "disabled"; 207 }; 208 }; 209}; 210