xref: /linux/arch/arm64/boot/dts/qcom/msm8998.dtsi (revision 7115816b609a491e767d8ee63ed2727048f51b5f) 
1// SPDX-License-Identifier: GPL-2.0
2/* Copyright (c) 2016, The Linux Foundation. All rights reserved. */
3
4#include <dt-bindings/interrupt-controller/arm-gic.h>
5#include <dt-bindings/clock/qcom,gcc-msm8998.h>
6#include <dt-bindings/clock/qcom,gpucc-msm8998.h>
7#include <dt-bindings/clock/qcom,mmcc-msm8998.h>
8#include <dt-bindings/clock/qcom,rpmcc.h>
9#include <dt-bindings/firmware/qcom,scm.h>
10#include <dt-bindings/power/qcom-rpmpd.h>
11#include <dt-bindings/gpio/gpio.h>
12
13/ {
14	interrupt-parent = <&intc>;
15
16	qcom,msm-id = <292 0x0>;
17
18	#address-cells = <2>;
19	#size-cells = <2>;
20
21	chosen { };
22
23	memory@80000000 {
24		device_type = "memory";
25		/* We expect the bootloader to fill in the reg */
26		reg = <0x0 0x80000000 0x0 0x0>;
27	};
28
29	reserved-memory {
30		#address-cells = <2>;
31		#size-cells = <2>;
32		ranges;
33
34		hyp_mem: memory@85800000 {
35			reg = <0x0 0x85800000 0x0 0x600000>;
36			no-map;
37		};
38
39		xbl_mem: memory@85e00000 {
40			reg = <0x0 0x85e00000 0x0 0x100000>;
41			no-map;
42		};
43
44		smem_mem: smem-mem@86000000 {
45			reg = <0x0 0x86000000 0x0 0x200000>;
46			no-map;
47		};
48
49		tz_mem: memory@86200000 {
50			reg = <0x0 0x86200000 0x0 0x2d00000>;
51			no-map;
52		};
53
54		rmtfs_mem: memory@88f00000 {
55			compatible = "qcom,rmtfs-mem";
56			reg = <0x0 0x88f00000 0x0 0x200000>;
57			no-map;
58
59			qcom,client-id = <1>;
60			qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>;
61		};
62
63		spss_mem: memory@8ab00000 {
64			reg = <0x0 0x8ab00000 0x0 0x700000>;
65			no-map;
66		};
67
68		adsp_mem: memory@8b200000 {
69			reg = <0x0 0x8b200000 0x0 0x1a00000>;
70			no-map;
71		};
72
73		mpss_mem: memory@8cc00000 {
74			reg = <0x0 0x8cc00000 0x0 0x7000000>;
75			no-map;
76		};
77
78		venus_mem: memory@93c00000 {
79			reg = <0x0 0x93c00000 0x0 0x500000>;
80			no-map;
81		};
82
83		mba_mem: memory@94100000 {
84			reg = <0x0 0x94100000 0x0 0x200000>;
85			no-map;
86		};
87
88		slpi_mem: memory@94300000 {
89			reg = <0x0 0x94300000 0x0 0xf00000>;
90			no-map;
91		};
92
93		ipa_fw_mem: memory@95200000 {
94			reg = <0x0 0x95200000 0x0 0x10000>;
95			no-map;
96		};
97
98		ipa_gsi_mem: memory@95210000 {
99			reg = <0x0 0x95210000 0x0 0x5000>;
100			no-map;
101		};
102
103		gpu_mem: memory@95600000 {
104			reg = <0x0 0x95600000 0x0 0x100000>;
105			no-map;
106		};
107
108		wlan_msa_mem: memory@95700000 {
109			reg = <0x0 0x95700000 0x0 0x100000>;
110			no-map;
111		};
112
113		mdata_mem: mpss-metadata {
114			alloc-ranges = <0x0 0xa0000000 0x0 0x20000000>;
115			size = <0x0 0x4000>;
116			no-map;
117		};
118	};
119
120	clocks {
121		xo: xo-board {
122			compatible = "fixed-clock";
123			#clock-cells = <0>;
124			clock-frequency = <19200000>;
125			clock-output-names = "xo_board";
126		};
127
128		sleep_clk: sleep-clk {
129			compatible = "fixed-clock";
130			#clock-cells = <0>;
131			clock-frequency = <32764>;
132		};
133	};
134
135	cpus {
136		#address-cells = <2>;
137		#size-cells = <0>;
138
139		CPU0: cpu@0 {
140			device_type = "cpu";
141			compatible = "qcom,kryo280";
142			reg = <0x0 0x0>;
143			enable-method = "psci";
144			capacity-dmips-mhz = <1024>;
145			cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
146			next-level-cache = <&L2_0>;
147			L2_0: l2-cache {
148				compatible = "cache";
149				cache-level = <2>;
150				cache-unified;
151			};
152		};
153
154		CPU1: cpu@1 {
155			device_type = "cpu";
156			compatible = "qcom,kryo280";
157			reg = <0x0 0x1>;
158			enable-method = "psci";
159			capacity-dmips-mhz = <1024>;
160			cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
161			next-level-cache = <&L2_0>;
162		};
163
164		CPU2: cpu@2 {
165			device_type = "cpu";
166			compatible = "qcom,kryo280";
167			reg = <0x0 0x2>;
168			enable-method = "psci";
169			capacity-dmips-mhz = <1024>;
170			cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
171			next-level-cache = <&L2_0>;
172		};
173
174		CPU3: cpu@3 {
175			device_type = "cpu";
176			compatible = "qcom,kryo280";
177			reg = <0x0 0x3>;
178			enable-method = "psci";
179			capacity-dmips-mhz = <1024>;
180			cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
181			next-level-cache = <&L2_0>;
182		};
183
184		CPU4: cpu@100 {
185			device_type = "cpu";
186			compatible = "qcom,kryo280";
187			reg = <0x0 0x100>;
188			enable-method = "psci";
189			capacity-dmips-mhz = <1536>;
190			cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>;
191			next-level-cache = <&L2_1>;
192			L2_1: l2-cache {
193				compatible = "cache";
194				cache-level = <2>;
195				cache-unified;
196			};
197		};
198
199		CPU5: cpu@101 {
200			device_type = "cpu";
201			compatible = "qcom,kryo280";
202			reg = <0x0 0x101>;
203			enable-method = "psci";
204			capacity-dmips-mhz = <1536>;
205			cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>;
206			next-level-cache = <&L2_1>;
207		};
208
209		CPU6: cpu@102 {
210			device_type = "cpu";
211			compatible = "qcom,kryo280";
212			reg = <0x0 0x102>;
213			enable-method = "psci";
214			capacity-dmips-mhz = <1536>;
215			cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>;
216			next-level-cache = <&L2_1>;
217		};
218
219		CPU7: cpu@103 {
220			device_type = "cpu";
221			compatible = "qcom,kryo280";
222			reg = <0x0 0x103>;
223			enable-method = "psci";
224			capacity-dmips-mhz = <1536>;
225			cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>;
226			next-level-cache = <&L2_1>;
227		};
228
229		cpu-map {
230			cluster0 {
231				core0 {
232					cpu = <&CPU0>;
233				};
234
235				core1 {
236					cpu = <&CPU1>;
237				};
238
239				core2 {
240					cpu = <&CPU2>;
241				};
242
243				core3 {
244					cpu = <&CPU3>;
245				};
246			};
247
248			cluster1 {
249				core0 {
250					cpu = <&CPU4>;
251				};
252
253				core1 {
254					cpu = <&CPU5>;
255				};
256
257				core2 {
258					cpu = <&CPU6>;
259				};
260
261				core3 {
262					cpu = <&CPU7>;
263				};
264			};
265		};
266
267		idle-states {
268			entry-method = "psci";
269
270			LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 {
271				compatible = "arm,idle-state";
272				idle-state-name = "little-retention";
273				/* CPU Retention (C2D), L2 Active */
274				arm,psci-suspend-param = <0x00000002>;
275				entry-latency-us = <81>;
276				exit-latency-us = <86>;
277				min-residency-us = <504>;
278			};
279
280			LITTLE_CPU_SLEEP_1: cpu-sleep-0-1 {
281				compatible = "arm,idle-state";
282				idle-state-name = "little-power-collapse";
283				/* CPU + L2 Power Collapse (C3, D4) */
284				arm,psci-suspend-param = <0x40000003>;
285				entry-latency-us = <814>;
286				exit-latency-us = <4562>;
287				min-residency-us = <9183>;
288				local-timer-stop;
289			};
290
291			BIG_CPU_SLEEP_0: cpu-sleep-1-0 {
292				compatible = "arm,idle-state";
293				idle-state-name = "big-retention";
294				/* CPU Retention (C2D), L2 Active */
295				arm,psci-suspend-param = <0x00000002>;
296				entry-latency-us = <79>;
297				exit-latency-us = <82>;
298				min-residency-us = <1302>;
299			};
300
301			BIG_CPU_SLEEP_1: cpu-sleep-1-1 {
302				compatible = "arm,idle-state";
303				idle-state-name = "big-power-collapse";
304				/* CPU + L2 Power Collapse (C3, D4) */
305				arm,psci-suspend-param = <0x40000003>;
306				entry-latency-us = <724>;
307				exit-latency-us = <2027>;
308				min-residency-us = <9419>;
309				local-timer-stop;
310			};
311		};
312	};
313
314	firmware {
315		scm {
316			compatible = "qcom,scm-msm8998", "qcom,scm";
317		};
318	};
319
320	dsi_opp_table: opp-table-dsi {
321		compatible = "operating-points-v2";
322
323		opp-131250000 {
324			opp-hz = /bits/ 64 <131250000>;
325			required-opps = <&rpmpd_opp_low_svs>;
326		};
327
328		opp-210000000 {
329			opp-hz = /bits/ 64 <210000000>;
330			required-opps = <&rpmpd_opp_svs>;
331		};
332
333		opp-312500000 {
334			opp-hz = /bits/ 64 <312500000>;
335			required-opps = <&rpmpd_opp_nom>;
336		};
337	};
338
339	psci {
340		compatible = "arm,psci-1.0";
341		method = "smc";
342	};
343
344	rpm: remoteproc {
345		compatible = "qcom,msm8998-rpm-proc", "qcom,rpm-proc";
346
347		glink-edge {
348			compatible = "qcom,glink-rpm";
349
350			interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
351			qcom,rpm-msg-ram = <&rpm_msg_ram>;
352			mboxes = <&apcs_glb 0>;
353
354			rpm_requests: rpm-requests {
355				compatible = "qcom,rpm-msm8998";
356				qcom,glink-channels = "rpm_requests";
357
358				rpmcc: clock-controller {
359					compatible = "qcom,rpmcc-msm8998", "qcom,rpmcc";
360					clocks = <&xo>;
361					clock-names = "xo";
362					#clock-cells = <1>;
363				};
364
365				rpmpd: power-controller {
366					compatible = "qcom,msm8998-rpmpd";
367					#power-domain-cells = <1>;
368					operating-points-v2 = <&rpmpd_opp_table>;
369
370					rpmpd_opp_table: opp-table {
371						compatible = "operating-points-v2";
372
373						rpmpd_opp_ret: opp1 {
374							opp-level = <RPM_SMD_LEVEL_RETENTION>;
375						};
376
377						rpmpd_opp_ret_plus: opp2 {
378							opp-level = <RPM_SMD_LEVEL_RETENTION_PLUS>;
379						};
380
381						rpmpd_opp_min_svs: opp3 {
382							opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
383						};
384
385						rpmpd_opp_low_svs: opp4 {
386							opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
387						};
388
389						rpmpd_opp_svs: opp5 {
390							opp-level = <RPM_SMD_LEVEL_SVS>;
391						};
392
393						rpmpd_opp_svs_plus: opp6 {
394							opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
395						};
396
397						rpmpd_opp_nom: opp7 {
398							opp-level = <RPM_SMD_LEVEL_NOM>;
399						};
400
401						rpmpd_opp_nom_plus: opp8 {
402							opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
403						};
404
405						rpmpd_opp_turbo: opp9 {
406							opp-level = <RPM_SMD_LEVEL_TURBO>;
407						};
408
409						rpmpd_opp_turbo_plus: opp10 {
410							opp-level = <RPM_SMD_LEVEL_BINNING>;
411						};
412					};
413				};
414			};
415		};
416	};
417
418	smem {
419		compatible = "qcom,smem";
420		memory-region = <&smem_mem>;
421		hwlocks = <&tcsr_mutex 3>;
422	};
423
424	smp2p-lpass {
425		compatible = "qcom,smp2p";
426		qcom,smem = <443>, <429>;
427
428		interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>;
429
430		mboxes = <&apcs_glb 10>;
431
432		qcom,local-pid = <0>;
433		qcom,remote-pid = <2>;
434
435		adsp_smp2p_out: master-kernel {
436			qcom,entry-name = "master-kernel";
437			#qcom,smem-state-cells = <1>;
438		};
439
440		adsp_smp2p_in: slave-kernel {
441			qcom,entry-name = "slave-kernel";
442
443			interrupt-controller;
444			#interrupt-cells = <2>;
445		};
446	};
447
448	smp2p-mpss {
449		compatible = "qcom,smp2p";
450		qcom,smem = <435>, <428>;
451		interrupts = <GIC_SPI 451 IRQ_TYPE_EDGE_RISING>;
452		mboxes = <&apcs_glb 14>;
453		qcom,local-pid = <0>;
454		qcom,remote-pid = <1>;
455
456		modem_smp2p_out: master-kernel {
457			qcom,entry-name = "master-kernel";
458			#qcom,smem-state-cells = <1>;
459		};
460
461		modem_smp2p_in: slave-kernel {
462			qcom,entry-name = "slave-kernel";
463			interrupt-controller;
464			#interrupt-cells = <2>;
465		};
466	};
467
468	smp2p-slpi {
469		compatible = "qcom,smp2p";
470		qcom,smem = <481>, <430>;
471		interrupts = <GIC_SPI 178 IRQ_TYPE_EDGE_RISING>;
472		mboxes = <&apcs_glb 26>;
473		qcom,local-pid = <0>;
474		qcom,remote-pid = <3>;
475
476		slpi_smp2p_out: master-kernel {
477			qcom,entry-name = "master-kernel";
478			#qcom,smem-state-cells = <1>;
479		};
480
481		slpi_smp2p_in: slave-kernel {
482			qcom,entry-name = "slave-kernel";
483			interrupt-controller;
484			#interrupt-cells = <2>;
485		};
486	};
487
488	thermal-zones {
489		cpu0-thermal {
490			polling-delay-passive = <250>;
491			polling-delay = <1000>;
492
493			thermal-sensors = <&tsens0 1>;
494
495			trips {
496				cpu0_alert0: trip-point0 {
497					temperature = <75000>;
498					hysteresis = <2000>;
499					type = "passive";
500				};
501
502				cpu0_crit: cpu-crit {
503					temperature = <110000>;
504					hysteresis = <2000>;
505					type = "critical";
506				};
507			};
508		};
509
510		cpu1-thermal {
511			polling-delay-passive = <250>;
512			polling-delay = <1000>;
513
514			thermal-sensors = <&tsens0 2>;
515
516			trips {
517				cpu1_alert0: trip-point0 {
518					temperature = <75000>;
519					hysteresis = <2000>;
520					type = "passive";
521				};
522
523				cpu1_crit: cpu-crit {
524					temperature = <110000>;
525					hysteresis = <2000>;
526					type = "critical";
527				};
528			};
529		};
530
531		cpu2-thermal {
532			polling-delay-passive = <250>;
533			polling-delay = <1000>;
534
535			thermal-sensors = <&tsens0 3>;
536
537			trips {
538				cpu2_alert0: trip-point0 {
539					temperature = <75000>;
540					hysteresis = <2000>;
541					type = "passive";
542				};
543
544				cpu2_crit: cpu-crit {
545					temperature = <110000>;
546					hysteresis = <2000>;
547					type = "critical";
548				};
549			};
550		};
551
552		cpu3-thermal {
553			polling-delay-passive = <250>;
554			polling-delay = <1000>;
555
556			thermal-sensors = <&tsens0 4>;
557
558			trips {
559				cpu3_alert0: trip-point0 {
560					temperature = <75000>;
561					hysteresis = <2000>;
562					type = "passive";
563				};
564
565				cpu3_crit: cpu-crit {
566					temperature = <110000>;
567					hysteresis = <2000>;
568					type = "critical";
569				};
570			};
571		};
572
573		cpu4-thermal {
574			polling-delay-passive = <250>;
575			polling-delay = <1000>;
576
577			thermal-sensors = <&tsens0 7>;
578
579			trips {
580				cpu4_alert0: trip-point0 {
581					temperature = <75000>;
582					hysteresis = <2000>;
583					type = "passive";
584				};
585
586				cpu4_crit: cpu-crit {
587					temperature = <110000>;
588					hysteresis = <2000>;
589					type = "critical";
590				};
591			};
592		};
593
594		cpu5-thermal {
595			polling-delay-passive = <250>;
596			polling-delay = <1000>;
597
598			thermal-sensors = <&tsens0 8>;
599
600			trips {
601				cpu5_alert0: trip-point0 {
602					temperature = <75000>;
603					hysteresis = <2000>;
604					type = "passive";
605				};
606
607				cpu5_crit: cpu-crit {
608					temperature = <110000>;
609					hysteresis = <2000>;
610					type = "critical";
611				};
612			};
613		};
614
615		cpu6-thermal {
616			polling-delay-passive = <250>;
617			polling-delay = <1000>;
618
619			thermal-sensors = <&tsens0 9>;
620
621			trips {
622				cpu6_alert0: trip-point0 {
623					temperature = <75000>;
624					hysteresis = <2000>;
625					type = "passive";
626				};
627
628				cpu6_crit: cpu-crit {
629					temperature = <110000>;
630					hysteresis = <2000>;
631					type = "critical";
632				};
633			};
634		};
635
636		cpu7-thermal {
637			polling-delay-passive = <250>;
638			polling-delay = <1000>;
639
640			thermal-sensors = <&tsens0 10>;
641
642			trips {
643				cpu7_alert0: trip-point0 {
644					temperature = <75000>;
645					hysteresis = <2000>;
646					type = "passive";
647				};
648
649				cpu7_crit: cpu-crit {
650					temperature = <110000>;
651					hysteresis = <2000>;
652					type = "critical";
653				};
654			};
655		};
656
657		gpu-bottom-thermal {
658			polling-delay-passive = <250>;
659			polling-delay = <1000>;
660
661			thermal-sensors = <&tsens0 12>;
662
663			trips {
664				gpu1_alert0: trip-point0 {
665					temperature = <90000>;
666					hysteresis = <2000>;
667					type = "hot";
668				};
669			};
670		};
671
672		gpu-top-thermal {
673			polling-delay-passive = <250>;
674			polling-delay = <1000>;
675
676			thermal-sensors = <&tsens0 13>;
677
678			trips {
679				gpu2_alert0: trip-point0 {
680					temperature = <90000>;
681					hysteresis = <2000>;
682					type = "hot";
683				};
684			};
685		};
686
687		clust0-mhm-thermal {
688			polling-delay-passive = <250>;
689			polling-delay = <1000>;
690
691			thermal-sensors = <&tsens0 5>;
692
693			trips {
694				cluster0_mhm_alert0: trip-point0 {
695					temperature = <90000>;
696					hysteresis = <2000>;
697					type = "hot";
698				};
699			};
700		};
701
702		clust1-mhm-thermal {
703			polling-delay-passive = <250>;
704			polling-delay = <1000>;
705
706			thermal-sensors = <&tsens0 6>;
707
708			trips {
709				cluster1_mhm_alert0: trip-point0 {
710					temperature = <90000>;
711					hysteresis = <2000>;
712					type = "hot";
713				};
714			};
715		};
716
717		cluster1-l2-thermal {
718			polling-delay-passive = <250>;
719			polling-delay = <1000>;
720
721			thermal-sensors = <&tsens0 11>;
722
723			trips {
724				cluster1_l2_alert0: trip-point0 {
725					temperature = <90000>;
726					hysteresis = <2000>;
727					type = "hot";
728				};
729			};
730		};
731
732		modem-thermal {
733			polling-delay-passive = <250>;
734			polling-delay = <1000>;
735
736			thermal-sensors = <&tsens1 1>;
737
738			trips {
739				modem_alert0: trip-point0 {
740					temperature = <90000>;
741					hysteresis = <2000>;
742					type = "hot";
743				};
744			};
745		};
746
747		mem-thermal {
748			polling-delay-passive = <250>;
749			polling-delay = <1000>;
750
751			thermal-sensors = <&tsens1 2>;
752
753			trips {
754				mem_alert0: trip-point0 {
755					temperature = <90000>;
756					hysteresis = <2000>;
757					type = "hot";
758				};
759			};
760		};
761
762		wlan-thermal {
763			polling-delay-passive = <250>;
764			polling-delay = <1000>;
765
766			thermal-sensors = <&tsens1 3>;
767
768			trips {
769				wlan_alert0: trip-point0 {
770					temperature = <90000>;
771					hysteresis = <2000>;
772					type = "hot";
773				};
774			};
775		};
776
777		q6-dsp-thermal {
778			polling-delay-passive = <250>;
779			polling-delay = <1000>;
780
781			thermal-sensors = <&tsens1 4>;
782
783			trips {
784				q6_dsp_alert0: trip-point0 {
785					temperature = <90000>;
786					hysteresis = <2000>;
787					type = "hot";
788				};
789			};
790		};
791
792		camera-thermal {
793			polling-delay-passive = <250>;
794			polling-delay = <1000>;
795
796			thermal-sensors = <&tsens1 5>;
797
798			trips {
799				camera_alert0: trip-point0 {
800					temperature = <90000>;
801					hysteresis = <2000>;
802					type = "hot";
803				};
804			};
805		};
806
807		multimedia-thermal {
808			polling-delay-passive = <250>;
809			polling-delay = <1000>;
810
811			thermal-sensors = <&tsens1 6>;
812
813			trips {
814				multimedia_alert0: trip-point0 {
815					temperature = <90000>;
816					hysteresis = <2000>;
817					type = "hot";
818				};
819			};
820		};
821	};
822
823	timer {
824		compatible = "arm,armv8-timer";
825		interrupts = <GIC_PPI 1 IRQ_TYPE_LEVEL_LOW>,
826			     <GIC_PPI 2 IRQ_TYPE_LEVEL_LOW>,
827			     <GIC_PPI 3 IRQ_TYPE_LEVEL_LOW>,
828			     <GIC_PPI 0 IRQ_TYPE_LEVEL_LOW>;
829	};
830
831	soc: soc@0 {
832		#address-cells = <1>;
833		#size-cells = <1>;
834		ranges = <0 0 0 0xffffffff>;
835		compatible = "simple-bus";
836
837		gcc: clock-controller@100000 {
838			compatible = "qcom,gcc-msm8998";
839			#clock-cells = <1>;
840			#reset-cells = <1>;
841			#power-domain-cells = <1>;
842			reg = <0x00100000 0xb0000>;
843
844			clock-names = "xo", "sleep_clk";
845			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&sleep_clk>;
846
847			/*
848			 * The hypervisor typically configures the memory region where these clocks
849			 * reside as read-only for the HLOS. If the HLOS tried to enable or disable
850			 * these clocks on a device with such configuration (e.g. because they are
851			 * enabled but unused during boot-up), the device will most likely decide
852			 * to reboot.
853			 * In light of that, we are conservative here and we list all such clocks
854			 * as protected. The board dts (or a user-supplied dts) can override the
855			 * list of protected clocks if it differs from the norm, and it is in fact
856			 * desired for the HLOS to manage these clocks
857			 */
858			protected-clocks = <AGGRE2_SNOC_NORTH_AXI>,
859					   <SSC_XO>,
860					   <SSC_CNOC_AHBS_CLK>;
861		};
862
863		rpm_msg_ram: sram@778000 {
864			compatible = "qcom,rpm-msg-ram";
865			reg = <0x00778000 0x7000>;
866		};
867
868		qfprom: qfprom@784000 {
869			compatible = "qcom,msm8998-qfprom", "qcom,qfprom";
870			reg = <0x00784000 0x621c>;
871			#address-cells = <1>;
872			#size-cells = <1>;
873
874			qusb2_hstx_trim: hstx-trim@23a {
875				reg = <0x23a 0x1>;
876				bits = <0 4>;
877			};
878		};
879
880		tsens0: thermal@10ab000 {
881			compatible = "qcom,msm8998-tsens", "qcom,tsens-v2";
882			reg = <0x010ab000 0x1000>, /* TM */
883			      <0x010aa000 0x1000>; /* SROT */
884			#qcom,sensors = <14>;
885			interrupts = <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>,
886				     <GIC_SPI 445 IRQ_TYPE_LEVEL_HIGH>;
887			interrupt-names = "uplow", "critical";
888			#thermal-sensor-cells = <1>;
889		};
890
891		tsens1: thermal@10ae000 {
892			compatible = "qcom,msm8998-tsens", "qcom,tsens-v2";
893			reg = <0x010ae000 0x1000>, /* TM */
894			      <0x010ad000 0x1000>; /* SROT */
895			#qcom,sensors = <8>;
896			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
897				     <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>;
898			interrupt-names = "uplow", "critical";
899			#thermal-sensor-cells = <1>;
900		};
901
902		anoc1_smmu: iommu@1680000 {
903			compatible = "qcom,msm8998-smmu-v2", "qcom,smmu-v2";
904			reg = <0x01680000 0x10000>;
905			#iommu-cells = <1>;
906
907			#global-interrupts = <0>;
908			interrupts =
909				<GIC_SPI 364 IRQ_TYPE_EDGE_RISING>,
910				<GIC_SPI 365 IRQ_TYPE_EDGE_RISING>,
911				<GIC_SPI 366 IRQ_TYPE_EDGE_RISING>,
912				<GIC_SPI 367 IRQ_TYPE_EDGE_RISING>,
913				<GIC_SPI 368 IRQ_TYPE_EDGE_RISING>,
914				<GIC_SPI 369 IRQ_TYPE_EDGE_RISING>;
915		};
916
917		anoc2_smmu: iommu@16c0000 {
918			compatible = "qcom,msm8998-smmu-v2", "qcom,smmu-v2";
919			reg = <0x016c0000 0x40000>;
920			#iommu-cells = <1>;
921
922			#global-interrupts = <0>;
923			interrupts =
924				<GIC_SPI 373 IRQ_TYPE_EDGE_RISING>,
925				<GIC_SPI 374 IRQ_TYPE_EDGE_RISING>,
926				<GIC_SPI 375 IRQ_TYPE_EDGE_RISING>,
927				<GIC_SPI 376 IRQ_TYPE_EDGE_RISING>,
928				<GIC_SPI 377 IRQ_TYPE_EDGE_RISING>,
929				<GIC_SPI 378 IRQ_TYPE_EDGE_RISING>,
930				<GIC_SPI 462 IRQ_TYPE_EDGE_RISING>,
931				<GIC_SPI 463 IRQ_TYPE_EDGE_RISING>,
932				<GIC_SPI 464 IRQ_TYPE_EDGE_RISING>,
933				<GIC_SPI 465 IRQ_TYPE_EDGE_RISING>;
934		};
935
936		pcie0: pci@1c00000 {
937			compatible = "qcom,pcie-msm8998", "qcom,pcie-msm8996";
938			reg = <0x01c00000 0x2000>,
939			      <0x1b000000 0xf1d>,
940			      <0x1b000f20 0xa8>,
941			      <0x1b100000 0x100000>;
942			reg-names = "parf", "dbi", "elbi", "config";
943			device_type = "pci";
944			linux,pci-domain = <0>;
945			bus-range = <0x00 0xff>;
946			#address-cells = <3>;
947			#size-cells = <2>;
948			num-lanes = <1>;
949			phys = <&pcie_phy>;
950			phy-names = "pciephy";
951			status = "disabled";
952
953			ranges = <0x01000000 0x0 0x00000000 0x1b200000 0x0 0x100000>,
954				 <0x02000000 0x0 0x1b300000 0x1b300000 0x0 0xd00000>;
955
956			#interrupt-cells = <1>;
957			interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>;
958			interrupt-names = "msi";
959			interrupt-map-mask = <0 0 0 0x7>;
960			interrupt-map = <0 0 0 1 &intc 0 0 135 IRQ_TYPE_LEVEL_HIGH>,
961					<0 0 0 2 &intc 0 0 136 IRQ_TYPE_LEVEL_HIGH>,
962					<0 0 0 3 &intc 0 0 138 IRQ_TYPE_LEVEL_HIGH>,
963					<0 0 0 4 &intc 0 0 139 IRQ_TYPE_LEVEL_HIGH>;
964
965			clocks = <&gcc GCC_PCIE_0_PIPE_CLK>,
966				 <&gcc GCC_PCIE_0_AUX_CLK>,
967				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
968				 <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
969				 <&gcc GCC_PCIE_0_SLV_AXI_CLK>;
970			clock-names = "pipe", "aux", "cfg", "bus_master", "bus_slave";
971
972			power-domains = <&gcc PCIE_0_GDSC>;
973			iommu-map = <0x100 &anoc1_smmu 0x1480 1>;
974			perst-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>;
975		};
976
977		pcie_phy: phy@1c06000 {
978			compatible = "qcom,msm8998-qmp-pcie-phy";
979			reg = <0x01c06000 0x1000>;
980			status = "disabled";
981
982			clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
983				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
984				 <&gcc GCC_PCIE_CLKREF_CLK>,
985				 <&gcc GCC_PCIE_0_PIPE_CLK>;
986			clock-names = "aux",
987				      "cfg_ahb",
988				      "ref",
989				      "pipe";
990
991			clock-output-names = "pcie_0_pipe_clk_src";
992			#clock-cells = <0>;
993
994			#phy-cells = <0>;
995
996			resets = <&gcc GCC_PCIE_0_PHY_BCR>, <&gcc GCC_PCIE_PHY_BCR>;
997			reset-names = "phy", "common";
998
999			vdda-phy-supply = <&vreg_l1a_0p875>;
1000			vdda-pll-supply = <&vreg_l2a_1p2>;
1001		};
1002
1003		ufshc: ufshc@1da4000 {
1004			compatible = "qcom,msm8998-ufshc", "qcom,ufshc", "jedec,ufs-2.0";
1005			reg = <0x01da4000 0x2500>;
1006			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
1007			phys = <&ufsphy_lanes>;
1008			phy-names = "ufsphy";
1009			lanes-per-direction = <2>;
1010			power-domains = <&gcc UFS_GDSC>;
1011			status = "disabled";
1012			#reset-cells = <1>;
1013
1014			clock-names =
1015				"core_clk",
1016				"bus_aggr_clk",
1017				"iface_clk",
1018				"core_clk_unipro",
1019				"ref_clk",
1020				"tx_lane0_sync_clk",
1021				"rx_lane0_sync_clk",
1022				"rx_lane1_sync_clk";
1023			clocks =
1024				<&gcc GCC_UFS_AXI_CLK>,
1025				<&gcc GCC_AGGRE1_UFS_AXI_CLK>,
1026				<&gcc GCC_UFS_AHB_CLK>,
1027				<&gcc GCC_UFS_UNIPRO_CORE_CLK>,
1028				<&rpmcc RPM_SMD_LN_BB_CLK1>,
1029				<&gcc GCC_UFS_TX_SYMBOL_0_CLK>,
1030				<&gcc GCC_UFS_RX_SYMBOL_0_CLK>,
1031				<&gcc GCC_UFS_RX_SYMBOL_1_CLK>;
1032			freq-table-hz =
1033				<50000000 200000000>,
1034				<0 0>,
1035				<0 0>,
1036				<37500000 150000000>,
1037				<0 0>,
1038				<0 0>,
1039				<0 0>,
1040				<0 0>;
1041
1042			resets = <&gcc GCC_UFS_BCR>;
1043			reset-names = "rst";
1044		};
1045
1046		ufsphy: phy@1da7000 {
1047			compatible = "qcom,msm8998-qmp-ufs-phy";
1048			reg = <0x01da7000 0x18c>;
1049			#address-cells = <1>;
1050			#size-cells = <1>;
1051			status = "disabled";
1052			ranges;
1053
1054			clock-names =
1055				"ref",
1056				"ref_aux";
1057			clocks =
1058				<&gcc GCC_UFS_CLKREF_CLK>,
1059				<&gcc GCC_UFS_PHY_AUX_CLK>;
1060
1061			reset-names = "ufsphy";
1062			resets = <&ufshc 0>;
1063
1064			ufsphy_lanes: phy@1da7400 {
1065				reg = <0x01da7400 0x128>,
1066				      <0x01da7600 0x1fc>,
1067				      <0x01da7c00 0x1dc>,
1068				      <0x01da7800 0x128>,
1069				      <0x01da7a00 0x1fc>;
1070				#phy-cells = <0>;
1071			};
1072		};
1073
1074		tcsr_mutex: hwlock@1f40000 {
1075			compatible = "qcom,tcsr-mutex";
1076			reg = <0x01f40000 0x20000>;
1077			#hwlock-cells = <1>;
1078		};
1079
1080		tcsr_regs_1: syscon@1f60000 {
1081			compatible = "qcom,msm8998-tcsr", "syscon";
1082			reg = <0x01f60000 0x20000>;
1083		};
1084
1085		tlmm: pinctrl@3400000 {
1086			compatible = "qcom,msm8998-pinctrl";
1087			reg = <0x03400000 0xc00000>;
1088			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
1089			gpio-ranges = <&tlmm 0 0 150>;
1090			gpio-controller;
1091			#gpio-cells = <2>;
1092			interrupt-controller;
1093			#interrupt-cells = <2>;
1094
1095			sdc2_on: sdc2-on-state {
1096				clk-pins {
1097					pins = "sdc2_clk";
1098					drive-strength = <16>;
1099					bias-disable;
1100				};
1101
1102				cmd-pins {
1103					pins = "sdc2_cmd";
1104					drive-strength = <10>;
1105					bias-pull-up;
1106				};
1107
1108				data-pins {
1109					pins = "sdc2_data";
1110					drive-strength = <10>;
1111					bias-pull-up;
1112				};
1113			};
1114
1115			sdc2_off: sdc2-off-state {
1116				clk-pins {
1117					pins = "sdc2_clk";
1118					drive-strength = <2>;
1119					bias-disable;
1120				};
1121
1122				cmd-pins {
1123					pins = "sdc2_cmd";
1124					drive-strength = <2>;
1125					bias-pull-up;
1126				};
1127
1128				data-pins {
1129					pins = "sdc2_data";
1130					drive-strength = <2>;
1131					bias-pull-up;
1132				};
1133			};
1134
1135			sdc2_cd: sdc2-cd-state {
1136				pins = "gpio95";
1137				function = "gpio";
1138				bias-pull-up;
1139				drive-strength = <2>;
1140			};
1141
1142			blsp1_uart3_on: blsp1-uart3-on-state {
1143				tx-pins {
1144					pins = "gpio45";
1145					function = "blsp_uart3_a";
1146					drive-strength = <2>;
1147					bias-disable;
1148				};
1149
1150				rx-pins {
1151					pins = "gpio46";
1152					function = "blsp_uart3_a";
1153					drive-strength = <2>;
1154					bias-disable;
1155				};
1156
1157				cts-pins {
1158					pins = "gpio47";
1159					function = "blsp_uart3_a";
1160					drive-strength = <2>;
1161					bias-disable;
1162				};
1163
1164				rfr-pins {
1165					pins = "gpio48";
1166					function = "blsp_uart3_a";
1167					drive-strength = <2>;
1168					bias-disable;
1169				};
1170			};
1171
1172			blsp1_i2c1_default: blsp1-i2c1-default-state {
1173				pins = "gpio2", "gpio3";
1174				function = "blsp_i2c1";
1175				drive-strength = <2>;
1176				bias-disable;
1177			};
1178
1179			blsp1_i2c1_sleep: blsp1-i2c1-sleep-state-state {
1180				pins = "gpio2", "gpio3";
1181				function = "blsp_i2c1";
1182				drive-strength = <2>;
1183				bias-pull-up;
1184			};
1185
1186			blsp1_i2c2_default: blsp1-i2c2-default-state {
1187				pins = "gpio32", "gpio33";
1188				function = "blsp_i2c2";
1189				drive-strength = <2>;
1190				bias-disable;
1191			};
1192
1193			blsp1_i2c2_sleep: blsp1-i2c2-sleep-state-state {
1194				pins = "gpio32", "gpio33";
1195				function = "blsp_i2c2";
1196				drive-strength = <2>;
1197				bias-pull-up;
1198			};
1199
1200			blsp1_i2c3_default: blsp1-i2c3-default-state {
1201				pins = "gpio47", "gpio48";
1202				function = "blsp_i2c3";
1203				drive-strength = <2>;
1204				bias-disable;
1205			};
1206
1207			blsp1_i2c3_sleep: blsp1-i2c3-sleep-state {
1208				pins = "gpio47", "gpio48";
1209				function = "blsp_i2c3";
1210				drive-strength = <2>;
1211				bias-pull-up;
1212			};
1213
1214			blsp1_i2c4_default: blsp1-i2c4-default-state {
1215				pins = "gpio10", "gpio11";
1216				function = "blsp_i2c4";
1217				drive-strength = <2>;
1218				bias-disable;
1219			};
1220
1221			blsp1_i2c4_sleep: blsp1-i2c4-sleep-state {
1222				pins = "gpio10", "gpio11";
1223				function = "blsp_i2c4";
1224				drive-strength = <2>;
1225				bias-pull-up;
1226			};
1227
1228			blsp1_i2c5_default: blsp1-i2c5-default-state {
1229				pins = "gpio87", "gpio88";
1230				function = "blsp_i2c5";
1231				drive-strength = <2>;
1232				bias-disable;
1233			};
1234
1235			blsp1_i2c5_sleep: blsp1-i2c5-sleep-state {
1236				pins = "gpio87", "gpio88";
1237				function = "blsp_i2c5";
1238				drive-strength = <2>;
1239				bias-pull-up;
1240			};
1241
1242			blsp1_i2c6_default: blsp1-i2c6-default-state {
1243				pins = "gpio43", "gpio44";
1244				function = "blsp_i2c6";
1245				drive-strength = <2>;
1246				bias-disable;
1247			};
1248
1249			blsp1_i2c6_sleep: blsp1-i2c6-sleep-state {
1250				pins = "gpio43", "gpio44";
1251				function = "blsp_i2c6";
1252				drive-strength = <2>;
1253				bias-pull-up;
1254			};
1255
1256			blsp1_spi_b_default: blsp1-spi-b-default-state {
1257				pins = "gpio23", "gpio28";
1258				function = "blsp1_spi_b";
1259				drive-strength = <6>;
1260				bias-disable;
1261			};
1262
1263			blsp1_spi1_default: blsp1-spi1-default-state {
1264				pins = "gpio0", "gpio1", "gpio2", "gpio3";
1265				function = "blsp_spi1";
1266				drive-strength = <6>;
1267				bias-disable;
1268			};
1269
1270			blsp1_spi2_default: blsp1-spi2-default-state {
1271				pins = "gpio31", "gpio34", "gpio32", "gpio33";
1272				function = "blsp_spi2";
1273				drive-strength = <6>;
1274				bias-disable;
1275			};
1276
1277			blsp1_spi3_default: blsp1-spi3-default-state {
1278				pins = "gpio45", "gpio46", "gpio47", "gpio48";
1279				function = "blsp_spi2";
1280				drive-strength = <6>;
1281				bias-disable;
1282			};
1283
1284			blsp1_spi4_default: blsp1-spi4-default-state {
1285				pins = "gpio8", "gpio9", "gpio10", "gpio11";
1286				function = "blsp_spi4";
1287				drive-strength = <6>;
1288				bias-disable;
1289			};
1290
1291			blsp1_spi5_default: blsp1-spi5-default-state {
1292				pins = "gpio85", "gpio86", "gpio87", "gpio88";
1293				function = "blsp_spi5";
1294				drive-strength = <6>;
1295				bias-disable;
1296			};
1297
1298			blsp1_spi6_default: blsp1-spi6-default-state {
1299				pins = "gpio41", "gpio42", "gpio43", "gpio44";
1300				function = "blsp_spi6";
1301				drive-strength = <6>;
1302				bias-disable;
1303			};
1304
1305
1306			/* 6 interfaces per QUP, BLSP2 indexes are numbered (n)+6 */
1307			blsp2_i2c1_default: blsp2-i2c1-default-state {
1308				pins = "gpio55", "gpio56";
1309				function = "blsp_i2c7";
1310				drive-strength = <2>;
1311				bias-disable;
1312			};
1313
1314			blsp2_i2c1_sleep: blsp2-i2c1-sleep-state {
1315				pins = "gpio55", "gpio56";
1316				function = "blsp_i2c7";
1317				drive-strength = <2>;
1318				bias-pull-up;
1319			};
1320
1321			blsp2_i2c2_default: blsp2-i2c2-default-state {
1322				pins = "gpio6", "gpio7";
1323				function = "blsp_i2c8";
1324				drive-strength = <2>;
1325				bias-disable;
1326			};
1327
1328			blsp2_i2c2_sleep: blsp2-i2c2-sleep-state {
1329				pins = "gpio6", "gpio7";
1330				function = "blsp_i2c8";
1331				drive-strength = <2>;
1332				bias-pull-up;
1333			};
1334
1335			blsp2_i2c3_default: blsp2-i2c3-default-state {
1336				pins = "gpio51", "gpio52";
1337				function = "blsp_i2c9";
1338				drive-strength = <2>;
1339				bias-disable;
1340			};
1341
1342			blsp2_i2c3_sleep: blsp2-i2c3-sleep-state {
1343				pins = "gpio51", "gpio52";
1344				function = "blsp_i2c9";
1345				drive-strength = <2>;
1346				bias-pull-up;
1347			};
1348
1349			blsp2_i2c4_default: blsp2-i2c4-default-state {
1350				pins = "gpio67", "gpio68";
1351				function = "blsp_i2c10";
1352				drive-strength = <2>;
1353				bias-disable;
1354			};
1355
1356			blsp2_i2c4_sleep: blsp2-i2c4-sleep-state {
1357				pins = "gpio67", "gpio68";
1358				function = "blsp_i2c10";
1359				drive-strength = <2>;
1360				bias-pull-up;
1361			};
1362
1363			blsp2_i2c5_default: blsp2-i2c5-default-state {
1364				pins = "gpio60", "gpio61";
1365				function = "blsp_i2c11";
1366				drive-strength = <2>;
1367				bias-disable;
1368			};
1369
1370			blsp2_i2c5_sleep: blsp2-i2c5-sleep-state {
1371				pins = "gpio60", "gpio61";
1372				function = "blsp_i2c11";
1373				drive-strength = <2>;
1374				bias-pull-up;
1375			};
1376
1377			blsp2_i2c6_default: blsp2-i2c6-default-state {
1378				pins = "gpio83", "gpio84";
1379				function = "blsp_i2c12";
1380				drive-strength = <2>;
1381				bias-disable;
1382			};
1383
1384			blsp2_i2c6_sleep: blsp2-i2c6-sleep-state {
1385				pins = "gpio83", "gpio84";
1386				function = "blsp_i2c12";
1387				drive-strength = <2>;
1388				bias-pull-up;
1389			};
1390
1391			blsp2_spi1_default: blsp2-spi1-default-state {
1392				pins = "gpio53", "gpio54", "gpio55", "gpio56";
1393				function = "blsp_spi7";
1394				drive-strength = <6>;
1395				bias-disable;
1396			};
1397
1398			blsp2_spi2_default: blsp2-spi2-default-state {
1399				pins = "gpio4", "gpio5", "gpio6", "gpio7";
1400				function = "blsp_spi8";
1401				drive-strength = <6>;
1402				bias-disable;
1403			};
1404
1405			blsp2_spi3_default: blsp2-spi3-default-state {
1406				pins = "gpio49", "gpio50", "gpio51", "gpio52";
1407				function = "blsp_spi9";
1408				drive-strength = <6>;
1409				bias-disable;
1410			};
1411
1412			blsp2_spi4_default: blsp2-spi4-default-state {
1413				pins = "gpio65", "gpio66", "gpio67", "gpio68";
1414				function = "blsp_spi10";
1415				drive-strength = <6>;
1416				bias-disable;
1417			};
1418
1419			blsp2_spi5_default: blsp2-spi5-default-state {
1420				pins = "gpio58", "gpio59", "gpio60", "gpio61";
1421				function = "blsp_spi11";
1422				drive-strength = <6>;
1423				bias-disable;
1424			};
1425
1426			blsp2_spi6_default: blsp2-spi6-default-state {
1427				pins = "gpio81", "gpio82", "gpio83", "gpio84";
1428				function = "blsp_spi12";
1429				drive-strength = <6>;
1430				bias-disable;
1431			};
1432		};
1433
1434		remoteproc_mss: remoteproc@4080000 {
1435			compatible = "qcom,msm8998-mss-pil";
1436			reg = <0x04080000 0x100>, <0x04180000 0x20>;
1437			reg-names = "qdsp6", "rmb";
1438
1439			interrupts-extended =
1440				<&intc GIC_SPI 448 IRQ_TYPE_EDGE_RISING>,
1441				<&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
1442				<&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
1443				<&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
1444				<&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
1445				<&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
1446			interrupt-names = "wdog", "fatal", "ready",
1447					  "handover", "stop-ack",
1448					  "shutdown-ack";
1449
1450			clocks = <&gcc GCC_MSS_CFG_AHB_CLK>,
1451				 <&gcc GCC_BIMC_MSS_Q6_AXI_CLK>,
1452				 <&gcc GCC_BOOT_ROM_AHB_CLK>,
1453				 <&gcc GCC_MSS_GPLL0_DIV_CLK_SRC>,
1454				 <&gcc GCC_MSS_SNOC_AXI_CLK>,
1455				 <&gcc GCC_MSS_MNOC_BIMC_AXI_CLK>,
1456				 <&rpmcc RPM_SMD_QDSS_CLK>,
1457				 <&rpmcc RPM_SMD_XO_CLK_SRC>;
1458			clock-names = "iface", "bus", "mem", "gpll0_mss",
1459				      "snoc_axi", "mnoc_axi", "qdss", "xo";
1460
1461			qcom,smem-states = <&modem_smp2p_out 0>;
1462			qcom,smem-state-names = "stop";
1463
1464			resets = <&gcc GCC_MSS_RESTART>;
1465			reset-names = "mss_restart";
1466
1467			qcom,halt-regs = <&tcsr_regs_1 0x3000 0x5000 0x4000>;
1468
1469			power-domains = <&rpmpd MSM8998_VDDCX>,
1470					<&rpmpd MSM8998_VDDMX>;
1471			power-domain-names = "cx", "mx";
1472
1473			status = "disabled";
1474
1475			mba {
1476				memory-region = <&mba_mem>;
1477			};
1478
1479			mpss {
1480				memory-region = <&mpss_mem>;
1481			};
1482
1483			metadata {
1484				memory-region = <&mdata_mem>;
1485			};
1486
1487			glink-edge {
1488				interrupts = <GIC_SPI 452 IRQ_TYPE_EDGE_RISING>;
1489				label = "modem";
1490				qcom,remote-pid = <1>;
1491				mboxes = <&apcs_glb 15>;
1492			};
1493		};
1494
1495		adreno_gpu: gpu@5000000 {
1496			compatible = "qcom,adreno-540.1", "qcom,adreno";
1497			reg = <0x05000000 0x40000>;
1498			reg-names = "kgsl_3d0_reg_memory";
1499
1500			clocks = <&gcc GCC_GPU_CFG_AHB_CLK>,
1501				<&gpucc RBBMTIMER_CLK>,
1502				<&gcc GCC_BIMC_GFX_CLK>,
1503				<&gcc GCC_GPU_BIMC_GFX_CLK>,
1504				<&gpucc RBCPR_CLK>,
1505				<&gpucc GFX3D_CLK>;
1506			clock-names = "iface",
1507				"rbbmtimer",
1508				"mem",
1509				"mem_iface",
1510				"rbcpr",
1511				"core";
1512
1513			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
1514			iommus = <&adreno_smmu 0>;
1515			operating-points-v2 = <&gpu_opp_table>;
1516			power-domains = <&rpmpd MSM8998_VDDMX>;
1517			status = "disabled";
1518
1519			gpu_opp_table: opp-table {
1520				compatible = "operating-points-v2";
1521				opp-710000097 {
1522					opp-hz = /bits/ 64 <710000097>;
1523					opp-level = <RPM_SMD_LEVEL_TURBO>;
1524					opp-supported-hw = <0xff>;
1525				};
1526
1527				opp-670000048 {
1528					opp-hz = /bits/ 64 <670000048>;
1529					opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
1530					opp-supported-hw = <0xff>;
1531				};
1532
1533				opp-596000097 {
1534					opp-hz = /bits/ 64 <596000097>;
1535					opp-level = <RPM_SMD_LEVEL_NOM>;
1536					opp-supported-hw = <0xff>;
1537				};
1538
1539				opp-515000097 {
1540					opp-hz = /bits/ 64 <515000097>;
1541					opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
1542					opp-supported-hw = <0xff>;
1543				};
1544
1545				opp-414000000 {
1546					opp-hz = /bits/ 64 <414000000>;
1547					opp-level = <RPM_SMD_LEVEL_SVS>;
1548					opp-supported-hw = <0xff>;
1549				};
1550
1551				opp-342000000 {
1552					opp-hz = /bits/ 64 <342000000>;
1553					opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
1554					opp-supported-hw = <0xff>;
1555				};
1556
1557				opp-257000000 {
1558					opp-hz = /bits/ 64 <257000000>;
1559					opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
1560					opp-supported-hw = <0xff>;
1561				};
1562			};
1563		};
1564
1565		adreno_smmu: iommu@5040000 {
1566			compatible = "qcom,msm8998-smmu-v2", "qcom,smmu-v2";
1567			reg = <0x05040000 0x10000>;
1568			clocks = <&gcc GCC_GPU_CFG_AHB_CLK>,
1569				 <&gcc GCC_BIMC_GFX_CLK>,
1570				 <&gcc GCC_GPU_BIMC_GFX_CLK>;
1571			clock-names = "iface", "mem", "mem_iface";
1572
1573			#global-interrupts = <0>;
1574			#iommu-cells = <1>;
1575			interrupts =
1576				<GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
1577				<GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
1578				<GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>;
1579			/*
1580			 * GPU-GX GDSC's parent is GPU-CX. We need to bring up the
1581			 * GPU-CX for SMMU but we need both of them up for Adreno.
1582			 * Contemporarily, we also need to manage the VDDMX rpmpd
1583			 * domain in the Adreno driver.
1584			 * Enable GPU CX/GX GDSCs here so that we can manage the
1585			 * SoC VDDMX RPM Power Domain in the Adreno driver.
1586			 */
1587			power-domains = <&gpucc GPU_GX_GDSC>;
1588			status = "disabled";
1589		};
1590
1591		gpucc: clock-controller@5065000 {
1592			compatible = "qcom,msm8998-gpucc";
1593			#clock-cells = <1>;
1594			#reset-cells = <1>;
1595			#power-domain-cells = <1>;
1596			reg = <0x05065000 0x9000>;
1597
1598			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
1599				 <&gcc GCC_GPU_GPLL0_CLK>;
1600			clock-names = "xo",
1601				      "gpll0";
1602		};
1603
1604		remoteproc_slpi: remoteproc@5800000 {
1605			compatible = "qcom,msm8998-slpi-pas";
1606			reg = <0x05800000 0x4040>;
1607
1608			interrupts-extended = <&intc GIC_SPI 390 IRQ_TYPE_EDGE_RISING>,
1609					      <&slpi_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
1610					      <&slpi_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
1611					      <&slpi_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
1612					      <&slpi_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
1613			interrupt-names = "wdog", "fatal", "ready",
1614					  "handover", "stop-ack";
1615
1616			px-supply = <&vreg_lvs2a_1p8>;
1617
1618			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
1619				 <&rpmcc RPM_SMD_AGGR2_NOC_CLK>;
1620			clock-names = "xo", "aggre2";
1621
1622			memory-region = <&slpi_mem>;
1623
1624			qcom,smem-states = <&slpi_smp2p_out 0>;
1625			qcom,smem-state-names = "stop";
1626
1627			power-domains = <&rpmpd MSM8998_SSCCX>;
1628			power-domain-names = "ssc_cx";
1629
1630			status = "disabled";
1631
1632			glink-edge {
1633				interrupts = <GIC_SPI 179 IRQ_TYPE_EDGE_RISING>;
1634				label = "dsps";
1635				qcom,remote-pid = <3>;
1636				mboxes = <&apcs_glb 27>;
1637			};
1638		};
1639
1640		stm: stm@6002000 {
1641			compatible = "arm,coresight-stm", "arm,primecell";
1642			reg = <0x06002000 0x1000>,
1643			      <0x16280000 0x180000>;
1644			reg-names = "stm-base", "stm-stimulus-base";
1645			status = "disabled";
1646
1647			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
1648			clock-names = "apb_pclk", "atclk";
1649
1650			out-ports {
1651				port {
1652					stm_out: endpoint {
1653						remote-endpoint = <&funnel0_in7>;
1654					};
1655				};
1656			};
1657		};
1658
1659		funnel1: funnel@6041000 {
1660			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
1661			reg = <0x06041000 0x1000>;
1662			status = "disabled";
1663
1664			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
1665			clock-names = "apb_pclk", "atclk";
1666
1667			out-ports {
1668				port {
1669					funnel0_out: endpoint {
1670						remote-endpoint =
1671						  <&merge_funnel_in0>;
1672					};
1673				};
1674			};
1675
1676			in-ports {
1677				#address-cells = <1>;
1678				#size-cells = <0>;
1679
1680				port@7 {
1681					reg = <7>;
1682					funnel0_in7: endpoint {
1683						remote-endpoint = <&stm_out>;
1684					};
1685				};
1686			};
1687		};
1688
1689		funnel2: funnel@6042000 {
1690			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
1691			reg = <0x06042000 0x1000>;
1692			status = "disabled";
1693
1694			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
1695			clock-names = "apb_pclk", "atclk";
1696
1697			out-ports {
1698				port {
1699					funnel1_out: endpoint {
1700						remote-endpoint =
1701						  <&merge_funnel_in1>;
1702					};
1703				};
1704			};
1705
1706			in-ports {
1707				#address-cells = <1>;
1708				#size-cells = <0>;
1709
1710				port@6 {
1711					reg = <6>;
1712					funnel1_in6: endpoint {
1713						remote-endpoint =
1714						  <&apss_merge_funnel_out>;
1715					};
1716				};
1717			};
1718		};
1719
1720		funnel3: funnel@6045000 {
1721			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
1722			reg = <0x06045000 0x1000>;
1723			status = "disabled";
1724
1725			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
1726			clock-names = "apb_pclk", "atclk";
1727
1728			out-ports {
1729				port {
1730					merge_funnel_out: endpoint {
1731						remote-endpoint =
1732						  <&etf_in>;
1733					};
1734				};
1735			};
1736
1737			in-ports {
1738				#address-cells = <1>;
1739				#size-cells = <0>;
1740
1741				port@0 {
1742					reg = <0>;
1743					merge_funnel_in0: endpoint {
1744						remote-endpoint =
1745						  <&funnel0_out>;
1746					};
1747				};
1748
1749				port@1 {
1750					reg = <1>;
1751					merge_funnel_in1: endpoint {
1752						remote-endpoint =
1753						  <&funnel1_out>;
1754					};
1755				};
1756			};
1757		};
1758
1759		replicator1: replicator@6046000 {
1760			compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
1761			reg = <0x06046000 0x1000>;
1762			status = "disabled";
1763
1764			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
1765			clock-names = "apb_pclk", "atclk";
1766
1767			out-ports {
1768				port {
1769					replicator_out: endpoint {
1770						remote-endpoint = <&etr_in>;
1771					};
1772				};
1773			};
1774
1775			in-ports {
1776				port {
1777					replicator_in: endpoint {
1778						remote-endpoint = <&etf_out>;
1779					};
1780				};
1781			};
1782		};
1783
1784		etf: etf@6047000 {
1785			compatible = "arm,coresight-tmc", "arm,primecell";
1786			reg = <0x06047000 0x1000>;
1787			status = "disabled";
1788
1789			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
1790			clock-names = "apb_pclk", "atclk";
1791
1792			out-ports {
1793				port {
1794					etf_out: endpoint {
1795						remote-endpoint =
1796						  <&replicator_in>;
1797					};
1798				};
1799			};
1800
1801			in-ports {
1802				port {
1803					etf_in: endpoint {
1804						remote-endpoint =
1805						  <&merge_funnel_out>;
1806					};
1807				};
1808			};
1809		};
1810
1811		etr: etr@6048000 {
1812			compatible = "arm,coresight-tmc", "arm,primecell";
1813			reg = <0x06048000 0x1000>;
1814			status = "disabled";
1815
1816			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
1817			clock-names = "apb_pclk", "atclk";
1818			arm,scatter-gather;
1819
1820			in-ports {
1821				port {
1822					etr_in: endpoint {
1823						remote-endpoint =
1824						  <&replicator_out>;
1825					};
1826				};
1827			};
1828		};
1829
1830		etm1: etm@7840000 {
1831			compatible = "arm,coresight-etm4x", "arm,primecell";
1832			reg = <0x07840000 0x1000>;
1833			status = "disabled";
1834
1835			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
1836			clock-names = "apb_pclk", "atclk";
1837
1838			cpu = <&CPU0>;
1839
1840			out-ports {
1841				port {
1842					etm0_out: endpoint {
1843						remote-endpoint =
1844						  <&apss_funnel_in0>;
1845					};
1846				};
1847			};
1848		};
1849
1850		etm2: etm@7940000 {
1851			compatible = "arm,coresight-etm4x", "arm,primecell";
1852			reg = <0x07940000 0x1000>;
1853			status = "disabled";
1854
1855			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
1856			clock-names = "apb_pclk", "atclk";
1857
1858			cpu = <&CPU1>;
1859
1860			out-ports {
1861				port {
1862					etm1_out: endpoint {
1863						remote-endpoint =
1864						  <&apss_funnel_in1>;
1865					};
1866				};
1867			};
1868		};
1869
1870		etm3: etm@7a40000 {
1871			compatible = "arm,coresight-etm4x", "arm,primecell";
1872			reg = <0x07a40000 0x1000>;
1873			status = "disabled";
1874
1875			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
1876			clock-names = "apb_pclk", "atclk";
1877
1878			cpu = <&CPU2>;
1879
1880			out-ports {
1881				port {
1882					etm2_out: endpoint {
1883						remote-endpoint =
1884						  <&apss_funnel_in2>;
1885					};
1886				};
1887			};
1888		};
1889
1890		etm4: etm@7b40000 {
1891			compatible = "arm,coresight-etm4x", "arm,primecell";
1892			reg = <0x07b40000 0x1000>;
1893			status = "disabled";
1894
1895			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
1896			clock-names = "apb_pclk", "atclk";
1897
1898			cpu = <&CPU3>;
1899
1900			out-ports {
1901				port {
1902					etm3_out: endpoint {
1903						remote-endpoint =
1904						  <&apss_funnel_in3>;
1905					};
1906				};
1907			};
1908		};
1909
1910		funnel4: funnel@7b60000 { /* APSS Funnel */
1911			compatible = "arm,coresight-etm4x", "arm,primecell";
1912			reg = <0x07b60000 0x1000>;
1913			status = "disabled";
1914
1915			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
1916			clock-names = "apb_pclk", "atclk";
1917
1918			out-ports {
1919				port {
1920					apss_funnel_out: endpoint {
1921						remote-endpoint =
1922						  <&apss_merge_funnel_in>;
1923					};
1924				};
1925			};
1926
1927			in-ports {
1928				#address-cells = <1>;
1929				#size-cells = <0>;
1930
1931				port@0 {
1932					reg = <0>;
1933					apss_funnel_in0: endpoint {
1934						remote-endpoint =
1935						  <&etm0_out>;
1936					};
1937				};
1938
1939				port@1 {
1940					reg = <1>;
1941					apss_funnel_in1: endpoint {
1942						remote-endpoint =
1943						  <&etm1_out>;
1944					};
1945				};
1946
1947				port@2 {
1948					reg = <2>;
1949					apss_funnel_in2: endpoint {
1950						remote-endpoint =
1951						  <&etm2_out>;
1952					};
1953				};
1954
1955				port@3 {
1956					reg = <3>;
1957					apss_funnel_in3: endpoint {
1958						remote-endpoint =
1959						  <&etm3_out>;
1960					};
1961				};
1962
1963				port@4 {
1964					reg = <4>;
1965					apss_funnel_in4: endpoint {
1966						remote-endpoint =
1967						  <&etm4_out>;
1968					};
1969				};
1970
1971				port@5 {
1972					reg = <5>;
1973					apss_funnel_in5: endpoint {
1974						remote-endpoint =
1975						  <&etm5_out>;
1976					};
1977				};
1978
1979				port@6 {
1980					reg = <6>;
1981					apss_funnel_in6: endpoint {
1982						remote-endpoint =
1983						  <&etm6_out>;
1984					};
1985				};
1986
1987				port@7 {
1988					reg = <7>;
1989					apss_funnel_in7: endpoint {
1990						remote-endpoint =
1991						  <&etm7_out>;
1992					};
1993				};
1994			};
1995		};
1996
1997		funnel5: funnel@7b70000 {
1998			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
1999			reg = <0x07b70000 0x1000>;
2000			status = "disabled";
2001
2002			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
2003			clock-names = "apb_pclk", "atclk";
2004
2005			out-ports {
2006				port {
2007					apss_merge_funnel_out: endpoint {
2008						remote-endpoint =
2009						  <&funnel1_in6>;
2010					};
2011				};
2012			};
2013
2014			in-ports {
2015				port {
2016					apss_merge_funnel_in: endpoint {
2017						remote-endpoint =
2018						  <&apss_funnel_out>;
2019					};
2020				};
2021			};
2022		};
2023
2024		etm5: etm@7c40000 {
2025			compatible = "arm,coresight-etm4x", "arm,primecell";
2026			reg = <0x07c40000 0x1000>;
2027			status = "disabled";
2028
2029			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
2030			clock-names = "apb_pclk", "atclk";
2031
2032			cpu = <&CPU4>;
2033
2034			port {
2035				etm4_out: endpoint {
2036					remote-endpoint = <&apss_funnel_in4>;
2037				};
2038			};
2039		};
2040
2041		etm6: etm@7d40000 {
2042			compatible = "arm,coresight-etm4x", "arm,primecell";
2043			reg = <0x07d40000 0x1000>;
2044			status = "disabled";
2045
2046			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
2047			clock-names = "apb_pclk", "atclk";
2048
2049			cpu = <&CPU5>;
2050
2051			port {
2052				etm5_out: endpoint {
2053					remote-endpoint = <&apss_funnel_in5>;
2054				};
2055			};
2056		};
2057
2058		etm7: etm@7e40000 {
2059			compatible = "arm,coresight-etm4x", "arm,primecell";
2060			reg = <0x07e40000 0x1000>;
2061			status = "disabled";
2062
2063			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
2064			clock-names = "apb_pclk", "atclk";
2065
2066			cpu = <&CPU6>;
2067
2068			port {
2069				etm6_out: endpoint {
2070					remote-endpoint = <&apss_funnel_in6>;
2071				};
2072			};
2073		};
2074
2075		etm8: etm@7f40000 {
2076			compatible = "arm,coresight-etm4x", "arm,primecell";
2077			reg = <0x07f40000 0x1000>;
2078			status = "disabled";
2079
2080			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
2081			clock-names = "apb_pclk", "atclk";
2082
2083			cpu = <&CPU7>;
2084
2085			port {
2086				etm7_out: endpoint {
2087					remote-endpoint = <&apss_funnel_in7>;
2088				};
2089			};
2090		};
2091
2092		sram@290000 {
2093			compatible = "qcom,rpm-stats";
2094			reg = <0x00290000 0x10000>;
2095		};
2096
2097		spmi_bus: spmi@800f000 {
2098			compatible = "qcom,spmi-pmic-arb";
2099			reg = <0x0800f000 0x1000>,
2100			      <0x08400000 0x1000000>,
2101			      <0x09400000 0x1000000>,
2102			      <0x0a400000 0x220000>,
2103			      <0x0800a000 0x3000>;
2104			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
2105			interrupt-names = "periph_irq";
2106			interrupts = <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>;
2107			qcom,ee = <0>;
2108			qcom,channel = <0>;
2109			#address-cells = <2>;
2110			#size-cells = <0>;
2111			interrupt-controller;
2112			#interrupt-cells = <4>;
2113		};
2114
2115		usb3: usb@a8f8800 {
2116			compatible = "qcom,msm8998-dwc3", "qcom,dwc3";
2117			reg = <0x0a8f8800 0x400>;
2118			status = "disabled";
2119			#address-cells = <1>;
2120			#size-cells = <1>;
2121			ranges;
2122
2123			clocks = <&gcc GCC_CFG_NOC_USB3_AXI_CLK>,
2124				 <&gcc GCC_USB30_MASTER_CLK>,
2125				 <&gcc GCC_AGGRE1_USB3_AXI_CLK>,
2126				 <&gcc GCC_USB30_SLEEP_CLK>,
2127				 <&gcc GCC_USB30_MOCK_UTMI_CLK>;
2128			clock-names = "cfg_noc",
2129				      "core",
2130				      "iface",
2131				      "sleep",
2132				      "mock_utmi";
2133
2134			assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>,
2135					  <&gcc GCC_USB30_MASTER_CLK>;
2136			assigned-clock-rates = <19200000>, <120000000>;
2137
2138			interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
2139				     <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
2140			interrupt-names = "hs_phy_irq", "ss_phy_irq";
2141
2142			power-domains = <&gcc USB_30_GDSC>;
2143
2144			resets = <&gcc GCC_USB_30_BCR>;
2145
2146			usb3_dwc3: usb@a800000 {
2147				compatible = "snps,dwc3";
2148				reg = <0x0a800000 0xcd00>;
2149				interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
2150				snps,dis_u2_susphy_quirk;
2151				snps,dis_enblslpm_quirk;
2152				phys = <&qusb2phy>, <&usb1_ssphy>;
2153				phy-names = "usb2-phy", "usb3-phy";
2154				snps,has-lpm-erratum;
2155				snps,hird-threshold = /bits/ 8 <0x10>;
2156			};
2157		};
2158
2159		usb3phy: phy@c010000 {
2160			compatible = "qcom,msm8998-qmp-usb3-phy";
2161			reg = <0x0c010000 0x18c>;
2162			status = "disabled";
2163			#address-cells = <1>;
2164			#size-cells = <1>;
2165			ranges;
2166
2167			clocks = <&gcc GCC_USB3_PHY_AUX_CLK>,
2168				 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
2169				 <&gcc GCC_USB3_CLKREF_CLK>;
2170			clock-names = "aux", "cfg_ahb", "ref";
2171
2172			resets = <&gcc GCC_USB3_PHY_BCR>,
2173				 <&gcc GCC_USB3PHY_PHY_BCR>;
2174			reset-names = "phy", "common";
2175
2176			usb1_ssphy: phy@c010200 {
2177				reg = <0xc010200 0x128>,
2178				      <0xc010400 0x200>,
2179				      <0xc010c00 0x20c>,
2180				      <0xc010600 0x128>,
2181				      <0xc010800 0x200>;
2182				#phy-cells = <0>;
2183				#clock-cells = <0>;
2184				clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>;
2185				clock-names = "pipe0";
2186				clock-output-names = "usb3_phy_pipe_clk_src";
2187			};
2188		};
2189
2190		qusb2phy: phy@c012000 {
2191			compatible = "qcom,msm8998-qusb2-phy";
2192			reg = <0x0c012000 0x2a8>;
2193			status = "disabled";
2194			#phy-cells = <0>;
2195
2196			clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
2197				 <&gcc GCC_RX1_USB2_CLKREF_CLK>;
2198			clock-names = "cfg_ahb", "ref";
2199
2200			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
2201
2202			nvmem-cells = <&qusb2_hstx_trim>;
2203		};
2204
2205		sdhc2: mmc@c0a4900 {
2206			compatible = "qcom,msm8998-sdhci", "qcom,sdhci-msm-v4";
2207			reg = <0x0c0a4900 0x314>, <0x0c0a4000 0x800>;
2208			reg-names = "hc", "core";
2209
2210			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
2211				     <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
2212			interrupt-names = "hc_irq", "pwr_irq";
2213
2214			clock-names = "iface", "core", "xo";
2215			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
2216				 <&gcc GCC_SDCC2_APPS_CLK>,
2217				 <&rpmcc RPM_SMD_XO_CLK_SRC>;
2218			bus-width = <4>;
2219			status = "disabled";
2220		};
2221
2222		blsp1_dma: dma-controller@c144000 {
2223			compatible = "qcom,bam-v1.7.0";
2224			reg = <0x0c144000 0x25000>;
2225			interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
2226			clocks = <&gcc GCC_BLSP1_AHB_CLK>;
2227			clock-names = "bam_clk";
2228			#dma-cells = <1>;
2229			qcom,ee = <0>;
2230			qcom,controlled-remotely;
2231			num-channels = <18>;
2232			qcom,num-ees = <4>;
2233		};
2234
2235		blsp1_uart3: serial@c171000 {
2236			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
2237			reg = <0x0c171000 0x1000>;
2238			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
2239			clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>,
2240				 <&gcc GCC_BLSP1_AHB_CLK>;
2241			clock-names = "core", "iface";
2242			dmas = <&blsp1_dma 4>, <&blsp1_dma 5>;
2243			dma-names = "tx", "rx";
2244			pinctrl-names = "default";
2245			pinctrl-0 = <&blsp1_uart3_on>;
2246			status = "disabled";
2247		};
2248
2249		blsp1_i2c1: i2c@c175000 {
2250			compatible = "qcom,i2c-qup-v2.2.1";
2251			reg = <0x0c175000 0x600>;
2252			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
2253
2254			clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>,
2255				 <&gcc GCC_BLSP1_AHB_CLK>;
2256			clock-names = "core", "iface";
2257			dmas = <&blsp1_dma 6>, <&blsp1_dma 7>;
2258			dma-names = "tx", "rx";
2259			pinctrl-names = "default", "sleep";
2260			pinctrl-0 = <&blsp1_i2c1_default>;
2261			pinctrl-1 = <&blsp1_i2c1_sleep>;
2262			clock-frequency = <400000>;
2263
2264			status = "disabled";
2265			#address-cells = <1>;
2266			#size-cells = <0>;
2267		};
2268
2269		blsp1_i2c2: i2c@c176000 {
2270			compatible = "qcom,i2c-qup-v2.2.1";
2271			reg = <0x0c176000 0x600>;
2272			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
2273
2274			clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>,
2275				 <&gcc GCC_BLSP1_AHB_CLK>;
2276			clock-names = "core", "iface";
2277			dmas = <&blsp1_dma 8>, <&blsp1_dma 9>;
2278			dma-names = "tx", "rx";
2279			pinctrl-names = "default", "sleep";
2280			pinctrl-0 = <&blsp1_i2c2_default>;
2281			pinctrl-1 = <&blsp1_i2c2_sleep>;
2282			clock-frequency = <400000>;
2283
2284			status = "disabled";
2285			#address-cells = <1>;
2286			#size-cells = <0>;
2287		};
2288
2289		blsp1_i2c3: i2c@c177000 {
2290			compatible = "qcom,i2c-qup-v2.2.1";
2291			reg = <0x0c177000 0x600>;
2292			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
2293
2294			clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>,
2295				 <&gcc GCC_BLSP1_AHB_CLK>;
2296			clock-names = "core", "iface";
2297			dmas = <&blsp1_dma 10>, <&blsp1_dma 11>;
2298			dma-names = "tx", "rx";
2299			pinctrl-names = "default", "sleep";
2300			pinctrl-0 = <&blsp1_i2c3_default>;
2301			pinctrl-1 = <&blsp1_i2c3_sleep>;
2302			clock-frequency = <400000>;
2303
2304			status = "disabled";
2305			#address-cells = <1>;
2306			#size-cells = <0>;
2307		};
2308
2309		blsp1_i2c4: i2c@c178000 {
2310			compatible = "qcom,i2c-qup-v2.2.1";
2311			reg = <0x0c178000 0x600>;
2312			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
2313
2314			clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>,
2315				 <&gcc GCC_BLSP1_AHB_CLK>;
2316			clock-names = "core", "iface";
2317			dmas = <&blsp1_dma 12>, <&blsp1_dma 13>;
2318			dma-names = "tx", "rx";
2319			pinctrl-names = "default", "sleep";
2320			pinctrl-0 = <&blsp1_i2c4_default>;
2321			pinctrl-1 = <&blsp1_i2c4_sleep>;
2322			clock-frequency = <400000>;
2323
2324			status = "disabled";
2325			#address-cells = <1>;
2326			#size-cells = <0>;
2327		};
2328
2329		blsp1_i2c5: i2c@c179000 {
2330			compatible = "qcom,i2c-qup-v2.2.1";
2331			reg = <0x0c179000 0x600>;
2332			interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
2333
2334			clocks = <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>,
2335				 <&gcc GCC_BLSP1_AHB_CLK>;
2336			clock-names = "core", "iface";
2337			dmas = <&blsp1_dma 14>, <&blsp1_dma 15>;
2338			dma-names = "tx", "rx";
2339			pinctrl-names = "default", "sleep";
2340			pinctrl-0 = <&blsp1_i2c5_default>;
2341			pinctrl-1 = <&blsp1_i2c5_sleep>;
2342			clock-frequency = <400000>;
2343
2344			status = "disabled";
2345			#address-cells = <1>;
2346			#size-cells = <0>;
2347		};
2348
2349		blsp1_i2c6: i2c@c17a000 {
2350			compatible = "qcom,i2c-qup-v2.2.1";
2351			reg = <0x0c17a000 0x600>;
2352			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
2353
2354			clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>,
2355				 <&gcc GCC_BLSP1_AHB_CLK>;
2356			clock-names = "core", "iface";
2357			dmas = <&blsp1_dma 16>, <&blsp1_dma 17>;
2358			dma-names = "tx", "rx";
2359			pinctrl-names = "default", "sleep";
2360			pinctrl-0 = <&blsp1_i2c6_default>;
2361			pinctrl-1 = <&blsp1_i2c6_sleep>;
2362			clock-frequency = <400000>;
2363
2364			status = "disabled";
2365			#address-cells = <1>;
2366			#size-cells = <0>;
2367		};
2368
2369		blsp1_spi1: spi@c175000 {
2370			compatible = "qcom,spi-qup-v2.2.1";
2371			reg = <0x0c175000 0x600>;
2372			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
2373
2374			clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
2375				 <&gcc GCC_BLSP1_AHB_CLK>;
2376			clock-names = "core", "iface";
2377			dmas = <&blsp1_dma 6>, <&blsp1_dma 7>;
2378			dma-names = "tx", "rx";
2379			pinctrl-names = "default";
2380			pinctrl-0 = <&blsp1_spi1_default>;
2381
2382			status = "disabled";
2383			#address-cells = <1>;
2384			#size-cells = <0>;
2385		};
2386
2387		blsp1_spi2: spi@c176000 {
2388			compatible = "qcom,spi-qup-v2.2.1";
2389			reg = <0x0c176000 0x600>;
2390			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
2391
2392			clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>,
2393				 <&gcc GCC_BLSP1_AHB_CLK>;
2394			clock-names = "core", "iface";
2395			dmas = <&blsp1_dma 8>, <&blsp1_dma 9>;
2396			dma-names = "tx", "rx";
2397			pinctrl-names = "default";
2398			pinctrl-0 = <&blsp1_spi2_default>;
2399
2400			status = "disabled";
2401			#address-cells = <1>;
2402			#size-cells = <0>;
2403		};
2404
2405		blsp1_spi3: spi@c177000 {
2406			compatible = "qcom,spi-qup-v2.2.1";
2407			reg = <0x0c177000 0x600>;
2408			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
2409
2410			clocks = <&gcc GCC_BLSP1_QUP3_SPI_APPS_CLK>,
2411				 <&gcc GCC_BLSP1_AHB_CLK>;
2412			clock-names = "core", "iface";
2413			dmas = <&blsp1_dma 10>, <&blsp1_dma 11>;
2414			dma-names = "tx", "rx";
2415			pinctrl-names = "default";
2416			pinctrl-0 = <&blsp1_spi3_default>;
2417
2418			status = "disabled";
2419			#address-cells = <1>;
2420			#size-cells = <0>;
2421		};
2422
2423		blsp1_spi4: spi@c178000 {
2424			compatible = "qcom,spi-qup-v2.2.1";
2425			reg = <0x0c178000 0x600>;
2426			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
2427
2428			clocks = <&gcc GCC_BLSP1_QUP4_SPI_APPS_CLK>,
2429				 <&gcc GCC_BLSP1_AHB_CLK>;
2430			clock-names = "core", "iface";
2431			dmas = <&blsp1_dma 12>, <&blsp1_dma 13>;
2432			dma-names = "tx", "rx";
2433			pinctrl-names = "default";
2434			pinctrl-0 = <&blsp1_spi4_default>;
2435
2436			status = "disabled";
2437			#address-cells = <1>;
2438			#size-cells = <0>;
2439		};
2440
2441		blsp1_spi5: spi@c179000 {
2442			compatible = "qcom,spi-qup-v2.2.1";
2443			reg = <0x0c179000 0x600>;
2444			interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
2445
2446			clocks = <&gcc GCC_BLSP1_QUP5_SPI_APPS_CLK>,
2447				 <&gcc GCC_BLSP1_AHB_CLK>;
2448			clock-names = "core", "iface";
2449			dmas = <&blsp1_dma 14>, <&blsp1_dma 15>;
2450			dma-names = "tx", "rx";
2451			pinctrl-names = "default";
2452			pinctrl-0 = <&blsp1_spi5_default>;
2453
2454			status = "disabled";
2455			#address-cells = <1>;
2456			#size-cells = <0>;
2457		};
2458
2459		blsp1_spi6: spi@c17a000 {
2460			compatible = "qcom,spi-qup-v2.2.1";
2461			reg = <0x0c17a000 0x600>;
2462			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
2463
2464			clocks = <&gcc GCC_BLSP1_QUP6_SPI_APPS_CLK>,
2465				 <&gcc GCC_BLSP1_AHB_CLK>;
2466			clock-names = "core", "iface";
2467			dmas = <&blsp1_dma 16>, <&blsp1_dma 17>;
2468			dma-names = "tx", "rx";
2469			pinctrl-names = "default";
2470			pinctrl-0 = <&blsp1_spi6_default>;
2471
2472			status = "disabled";
2473			#address-cells = <1>;
2474			#size-cells = <0>;
2475		};
2476
2477		blsp2_dma: dma-controller@c184000 {
2478			compatible = "qcom,bam-v1.7.0";
2479			reg = <0x0c184000 0x25000>;
2480			interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
2481			clocks = <&gcc GCC_BLSP2_AHB_CLK>;
2482			clock-names = "bam_clk";
2483			#dma-cells = <1>;
2484			qcom,ee = <0>;
2485			qcom,controlled-remotely;
2486			num-channels = <18>;
2487			qcom,num-ees = <4>;
2488		};
2489
2490		blsp2_uart1: serial@c1b0000 {
2491			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
2492			reg = <0x0c1b0000 0x1000>;
2493			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
2494			clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>,
2495				 <&gcc GCC_BLSP2_AHB_CLK>;
2496			clock-names = "core", "iface";
2497			status = "disabled";
2498		};
2499
2500		blsp2_i2c1: i2c@c1b5000 {
2501			compatible = "qcom,i2c-qup-v2.2.1";
2502			reg = <0x0c1b5000 0x600>;
2503			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
2504
2505			clocks = <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>,
2506				 <&gcc GCC_BLSP2_AHB_CLK>;
2507			clock-names = "core", "iface";
2508			dmas = <&blsp2_dma 6>, <&blsp2_dma 7>;
2509			dma-names = "tx", "rx";
2510			pinctrl-names = "default", "sleep";
2511			pinctrl-0 = <&blsp2_i2c1_default>;
2512			pinctrl-1 = <&blsp2_i2c1_sleep>;
2513			clock-frequency = <400000>;
2514
2515			status = "disabled";
2516			#address-cells = <1>;
2517			#size-cells = <0>;
2518		};
2519
2520		blsp2_i2c2: i2c@c1b6000 {
2521			compatible = "qcom,i2c-qup-v2.2.1";
2522			reg = <0x0c1b6000 0x600>;
2523			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
2524
2525			clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>,
2526				 <&gcc GCC_BLSP2_AHB_CLK>;
2527			clock-names = "core", "iface";
2528			dmas = <&blsp2_dma 8>, <&blsp2_dma 9>;
2529			dma-names = "tx", "rx";
2530			pinctrl-names = "default", "sleep";
2531			pinctrl-0 = <&blsp2_i2c2_default>;
2532			pinctrl-1 = <&blsp2_i2c2_sleep>;
2533			clock-frequency = <400000>;
2534
2535			status = "disabled";
2536			#address-cells = <1>;
2537			#size-cells = <0>;
2538		};
2539
2540		blsp2_i2c3: i2c@c1b7000 {
2541			compatible = "qcom,i2c-qup-v2.2.1";
2542			reg = <0x0c1b7000 0x600>;
2543			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
2544
2545			clocks = <&gcc GCC_BLSP2_QUP3_I2C_APPS_CLK>,
2546				 <&gcc GCC_BLSP2_AHB_CLK>;
2547			clock-names = "core", "iface";
2548			dmas = <&blsp2_dma 10>, <&blsp2_dma 11>;
2549			dma-names = "tx", "rx";
2550			pinctrl-names = "default", "sleep";
2551			pinctrl-0 = <&blsp2_i2c3_default>;
2552			pinctrl-1 = <&blsp2_i2c3_sleep>;
2553			clock-frequency = <400000>;
2554
2555			status = "disabled";
2556			#address-cells = <1>;
2557			#size-cells = <0>;
2558		};
2559
2560		blsp2_i2c4: i2c@c1b8000 {
2561			compatible = "qcom,i2c-qup-v2.2.1";
2562			reg = <0x0c1b8000 0x600>;
2563			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
2564
2565			clocks = <&gcc GCC_BLSP2_QUP4_I2C_APPS_CLK>,
2566				 <&gcc GCC_BLSP2_AHB_CLK>;
2567			clock-names = "core", "iface";
2568			dmas = <&blsp2_dma 12>, <&blsp2_dma 13>;
2569			dma-names = "tx", "rx";
2570			pinctrl-names = "default", "sleep";
2571			pinctrl-0 = <&blsp2_i2c4_default>;
2572			pinctrl-1 = <&blsp2_i2c4_sleep>;
2573			clock-frequency = <400000>;
2574
2575			status = "disabled";
2576			#address-cells = <1>;
2577			#size-cells = <0>;
2578		};
2579
2580		blsp2_i2c5: i2c@c1b9000 {
2581			compatible = "qcom,i2c-qup-v2.2.1";
2582			reg = <0x0c1b9000 0x600>;
2583			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
2584
2585			clocks = <&gcc GCC_BLSP2_QUP5_I2C_APPS_CLK>,
2586				 <&gcc GCC_BLSP2_AHB_CLK>;
2587			clock-names = "core", "iface";
2588			dmas = <&blsp2_dma 14>, <&blsp2_dma 15>;
2589			dma-names = "tx", "rx";
2590			pinctrl-names = "default", "sleep";
2591			pinctrl-0 = <&blsp2_i2c5_default>;
2592			pinctrl-1 = <&blsp2_i2c5_sleep>;
2593			clock-frequency = <400000>;
2594
2595			status = "disabled";
2596			#address-cells = <1>;
2597			#size-cells = <0>;
2598		};
2599
2600		blsp2_i2c6: i2c@c1ba000 {
2601			compatible = "qcom,i2c-qup-v2.2.1";
2602			reg = <0x0c1ba000 0x600>;
2603			interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
2604
2605			clocks = <&gcc GCC_BLSP2_QUP6_I2C_APPS_CLK>,
2606				 <&gcc GCC_BLSP2_AHB_CLK>;
2607			clock-names = "core", "iface";
2608			dmas = <&blsp2_dma 16>, <&blsp2_dma 17>;
2609			dma-names = "tx", "rx";
2610			pinctrl-names = "default", "sleep";
2611			pinctrl-0 = <&blsp2_i2c6_default>;
2612			pinctrl-1 = <&blsp2_i2c6_sleep>;
2613			clock-frequency = <400000>;
2614
2615			status = "disabled";
2616			#address-cells = <1>;
2617			#size-cells = <0>;
2618		};
2619
2620		blsp2_spi1: spi@c1b5000 {
2621			compatible = "qcom,spi-qup-v2.2.1";
2622			reg = <0x0c1b5000 0x600>;
2623			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
2624
2625			clocks = <&gcc GCC_BLSP2_QUP1_SPI_APPS_CLK>,
2626				 <&gcc GCC_BLSP2_AHB_CLK>;
2627			clock-names = "core", "iface";
2628			dmas = <&blsp2_dma 6>, <&blsp2_dma 7>;
2629			dma-names = "tx", "rx";
2630			pinctrl-names = "default";
2631			pinctrl-0 = <&blsp2_spi1_default>;
2632
2633			status = "disabled";
2634			#address-cells = <1>;
2635			#size-cells = <0>;
2636		};
2637
2638		blsp2_spi2: spi@c1b6000 {
2639			compatible = "qcom,spi-qup-v2.2.1";
2640			reg = <0x0c1b6000 0x600>;
2641			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
2642
2643			clocks = <&gcc GCC_BLSP2_QUP2_SPI_APPS_CLK>,
2644				 <&gcc GCC_BLSP2_AHB_CLK>;
2645			clock-names = "core", "iface";
2646			dmas = <&blsp2_dma 8>, <&blsp2_dma 9>;
2647			dma-names = "tx", "rx";
2648			pinctrl-names = "default";
2649			pinctrl-0 = <&blsp2_spi2_default>;
2650
2651			status = "disabled";
2652			#address-cells = <1>;
2653			#size-cells = <0>;
2654		};
2655
2656		blsp2_spi3: spi@c1b7000 {
2657			compatible = "qcom,spi-qup-v2.2.1";
2658			reg = <0x0c1b7000 0x600>;
2659			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
2660
2661			clocks = <&gcc GCC_BLSP2_QUP3_SPI_APPS_CLK>,
2662				 <&gcc GCC_BLSP2_AHB_CLK>;
2663			clock-names = "core", "iface";
2664			dmas = <&blsp2_dma 10>, <&blsp2_dma 11>;
2665			dma-names = "tx", "rx";
2666			pinctrl-names = "default";
2667			pinctrl-0 = <&blsp2_spi3_default>;
2668
2669			status = "disabled";
2670			#address-cells = <1>;
2671			#size-cells = <0>;
2672		};
2673
2674		blsp2_spi4: spi@c1b8000 {
2675			compatible = "qcom,spi-qup-v2.2.1";
2676			reg = <0x0c1b8000 0x600>;
2677			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
2678
2679			clocks = <&gcc GCC_BLSP2_QUP4_SPI_APPS_CLK>,
2680				 <&gcc GCC_BLSP2_AHB_CLK>;
2681			clock-names = "core", "iface";
2682			dmas = <&blsp2_dma 12>, <&blsp2_dma 13>;
2683			dma-names = "tx", "rx";
2684			pinctrl-names = "default";
2685			pinctrl-0 = <&blsp2_spi4_default>;
2686
2687			status = "disabled";
2688			#address-cells = <1>;
2689			#size-cells = <0>;
2690		};
2691
2692		blsp2_spi5: spi@c1b9000 {
2693			compatible = "qcom,spi-qup-v2.2.1";
2694			reg = <0x0c1b9000 0x600>;
2695			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
2696
2697			clocks = <&gcc GCC_BLSP2_QUP5_SPI_APPS_CLK>,
2698				 <&gcc GCC_BLSP2_AHB_CLK>;
2699			clock-names = "core", "iface";
2700			dmas = <&blsp2_dma 14>, <&blsp2_dma 15>;
2701			dma-names = "tx", "rx";
2702			pinctrl-names = "default";
2703			pinctrl-0 = <&blsp2_spi5_default>;
2704
2705			status = "disabled";
2706			#address-cells = <1>;
2707			#size-cells = <0>;
2708		};
2709
2710		blsp2_spi6: spi@c1ba000 {
2711			compatible = "qcom,spi-qup-v2.2.1";
2712			reg = <0x0c1ba000 0x600>;
2713			interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
2714
2715			clocks = <&gcc GCC_BLSP2_QUP6_SPI_APPS_CLK>,
2716				 <&gcc GCC_BLSP2_AHB_CLK>;
2717			clock-names = "core", "iface";
2718			dmas = <&blsp2_dma 16>, <&blsp2_dma 17>;
2719			dma-names = "tx", "rx";
2720			pinctrl-names = "default";
2721			pinctrl-0 = <&blsp2_spi6_default>;
2722
2723			status = "disabled";
2724			#address-cells = <1>;
2725			#size-cells = <0>;
2726		};
2727
2728		mmcc: clock-controller@c8c0000 {
2729			compatible = "qcom,mmcc-msm8998";
2730			#clock-cells = <1>;
2731			#reset-cells = <1>;
2732			#power-domain-cells = <1>;
2733			reg = <0xc8c0000 0x40000>;
2734
2735			clock-names = "xo",
2736				      "gpll0",
2737				      "dsi0dsi",
2738				      "dsi0byte",
2739				      "dsi1dsi",
2740				      "dsi1byte",
2741				      "hdmipll",
2742				      "dplink",
2743				      "dpvco",
2744				      "gpll0_div";
2745			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
2746				 <&gcc GCC_MMSS_GPLL0_CLK>,
2747				 <&mdss_dsi0_phy 1>,
2748				 <&mdss_dsi0_phy 0>,
2749				 <&mdss_dsi1_phy 1>,
2750				 <&mdss_dsi1_phy 0>,
2751				 <0>,
2752				 <0>,
2753				 <0>,
2754				 <&gcc GCC_MMSS_GPLL0_DIV_CLK>;
2755		};
2756
2757		mdss: display-subsystem@c900000 {
2758			compatible = "qcom,msm8998-mdss";
2759			reg = <0x0c900000 0x1000>;
2760			reg-names = "mdss";
2761
2762			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
2763			interrupt-controller;
2764			#interrupt-cells = <1>;
2765
2766			clocks = <&mmcc MDSS_AHB_CLK>,
2767				 <&mmcc MDSS_AXI_CLK>,
2768				 <&mmcc MDSS_MDP_CLK>;
2769			clock-names = "iface",
2770				      "bus",
2771				      "core";
2772
2773			power-domains = <&mmcc MDSS_GDSC>;
2774			iommus = <&mmss_smmu 0>;
2775
2776			#address-cells = <1>;
2777			#size-cells = <1>;
2778			ranges;
2779
2780			status = "disabled";
2781
2782			mdss_mdp: display-controller@c901000 {
2783				compatible = "qcom,msm8998-dpu";
2784				reg = <0x0c901000 0x8f000>,
2785				      <0x0c9a8e00 0xf0>,
2786				      <0x0c9b0000 0x2008>,
2787				      <0x0c9b8000 0x1040>;
2788				reg-names = "mdp",
2789					    "regdma",
2790					    "vbif",
2791					    "vbif_nrt";
2792
2793				interrupt-parent = <&mdss>;
2794				interrupts = <0>;
2795
2796				clocks = <&mmcc MDSS_AHB_CLK>,
2797					 <&mmcc MDSS_AXI_CLK>,
2798					 <&mmcc MNOC_AHB_CLK>,
2799					 <&mmcc MDSS_MDP_CLK>,
2800					 <&mmcc MDSS_VSYNC_CLK>;
2801				clock-names = "iface",
2802					      "bus",
2803					      "mnoc",
2804					      "core",
2805					      "vsync";
2806
2807				assigned-clocks = <&mmcc MDSS_VSYNC_CLK>;
2808				assigned-clock-rates = <19200000>;
2809
2810				operating-points-v2 = <&mdp_opp_table>;
2811				power-domains = <&rpmpd MSM8998_VDDMX>;
2812
2813				mdp_opp_table: opp-table {
2814					compatible = "operating-points-v2";
2815
2816					opp-171430000 {
2817						opp-hz = /bits/ 64 <171430000>;
2818						required-opps = <&rpmpd_opp_low_svs>;
2819					};
2820
2821					opp-275000000 {
2822						opp-hz = /bits/ 64 <275000000>;
2823						required-opps = <&rpmpd_opp_svs>;
2824					};
2825
2826					opp-330000000 {
2827						opp-hz = /bits/ 64 <330000000>;
2828						required-opps = <&rpmpd_opp_nom>;
2829					};
2830
2831					opp-412500000 {
2832						opp-hz = /bits/ 64 <412500000>;
2833						required-opps = <&rpmpd_opp_turbo>;
2834					};
2835				};
2836
2837				ports {
2838					#address-cells = <1>;
2839					#size-cells = <0>;
2840
2841					port@0 {
2842						reg = <0>;
2843
2844						dpu_intf1_out: endpoint {
2845							remote-endpoint = <&mdss_dsi0_in>;
2846						};
2847					};
2848
2849					port@1 {
2850						reg = <1>;
2851
2852						dpu_intf2_out: endpoint {
2853							remote-endpoint = <&mdss_dsi1_in>;
2854						};
2855					};
2856				};
2857			};
2858
2859			mdss_dsi0: dsi@c994000 {
2860				compatible = "qcom,msm8998-dsi-ctrl", "qcom,mdss-dsi-ctrl";
2861				reg = <0x0c994000 0x400>;
2862				reg-names = "dsi_ctrl";
2863
2864				interrupt-parent = <&mdss>;
2865				interrupts = <4>;
2866
2867				clocks = <&mmcc MDSS_BYTE0_CLK>,
2868					 <&mmcc MDSS_BYTE0_INTF_CLK>,
2869					 <&mmcc MDSS_PCLK0_CLK>,
2870					 <&mmcc MDSS_ESC0_CLK>,
2871					 <&mmcc MDSS_AHB_CLK>,
2872					 <&mmcc MDSS_AXI_CLK>;
2873				clock-names = "byte",
2874					      "byte_intf",
2875					      "pixel",
2876					      "core",
2877					      "iface",
2878					      "bus";
2879				assigned-clocks = <&mmcc BYTE0_CLK_SRC>,
2880						  <&mmcc PCLK0_CLK_SRC>;
2881				assigned-clock-parents = <&mdss_dsi0_phy 0>,
2882							 <&mdss_dsi0_phy 1>;
2883
2884				operating-points-v2 = <&dsi_opp_table>;
2885				power-domains = <&rpmpd MSM8998_VDDCX>;
2886
2887				phys = <&mdss_dsi0_phy>;
2888				phy-names = "dsi";
2889
2890				#address-cells = <1>;
2891				#size-cells = <0>;
2892
2893				status = "disabled";
2894
2895				ports {
2896					#address-cells = <1>;
2897					#size-cells = <0>;
2898
2899					port@0 {
2900						reg = <0>;
2901
2902						mdss_dsi0_in: endpoint {
2903							remote-endpoint = <&dpu_intf1_out>;
2904						};
2905					};
2906
2907					port@1 {
2908						reg = <1>;
2909
2910						mdss_dsi0_out: endpoint {
2911						};
2912					};
2913				};
2914			};
2915
2916			mdss_dsi0_phy: phy@c994400 {
2917				compatible = "qcom,dsi-phy-10nm-8998";
2918				reg = <0x0c994400 0x200>,
2919				      <0x0c994600 0x280>,
2920				      <0x0c994a00 0x1e0>;
2921				reg-names = "dsi_phy",
2922					    "dsi_phy_lane",
2923					    "dsi_pll";
2924
2925				clocks = <&mmcc MDSS_AHB_CLK>,
2926					 <&rpmcc RPM_SMD_XO_CLK_SRC>;
2927				clock-names = "iface", "ref";
2928
2929				#clock-cells = <1>;
2930				#phy-cells = <0>;
2931
2932				status = "disabled";
2933			};
2934
2935			mdss_dsi1: dsi@c996000 {
2936				compatible = "qcom,msm8998-dsi-ctrl", "qcom,mdss-dsi-ctrl";
2937				reg = <0x0c996000 0x400>;
2938				reg-names = "dsi_ctrl";
2939
2940				interrupt-parent = <&mdss>;
2941				interrupts = <5>;
2942
2943				clocks = <&mmcc MDSS_BYTE1_CLK>,
2944					 <&mmcc MDSS_BYTE1_INTF_CLK>,
2945					 <&mmcc MDSS_PCLK1_CLK>,
2946					 <&mmcc MDSS_ESC1_CLK>,
2947					 <&mmcc MDSS_AHB_CLK>,
2948					 <&mmcc MDSS_AXI_CLK>;
2949				clock-names = "byte",
2950					      "byte_intf",
2951					      "pixel",
2952					      "core",
2953					      "iface",
2954					      "bus";
2955				assigned-clocks = <&mmcc BYTE1_CLK_SRC>,
2956						  <&mmcc PCLK1_CLK_SRC>;
2957				assigned-clock-parents = <&mdss_dsi1_phy 0>,
2958							 <&mdss_dsi1_phy 1>;
2959
2960				operating-points-v2 = <&dsi_opp_table>;
2961				power-domains = <&rpmpd MSM8998_VDDCX>;
2962
2963				phys = <&mdss_dsi1_phy>;
2964				phy-names = "dsi";
2965
2966				#address-cells = <1>;
2967				#size-cells = <0>;
2968
2969				status = "disabled";
2970
2971				ports {
2972					#address-cells = <1>;
2973					#size-cells = <0>;
2974
2975					port@0 {
2976						reg = <0>;
2977
2978						mdss_dsi1_in: endpoint {
2979							remote-endpoint = <&dpu_intf2_out>;
2980						};
2981					};
2982
2983					port@1 {
2984						reg = <1>;
2985
2986						mdss_dsi1_out: endpoint {
2987						};
2988					};
2989				};
2990			};
2991
2992			mdss_dsi1_phy: phy@c996400 {
2993				compatible = "qcom,dsi-phy-10nm-8998";
2994				reg = <0x0c996400 0x200>,
2995				      <0x0c996600 0x280>,
2996				      <0x0c996a00 0x10e>;
2997				reg-names = "dsi_phy",
2998					    "dsi_phy_lane",
2999					    "dsi_pll";
3000
3001				clocks = <&mmcc MDSS_AHB_CLK>,
3002					 <&rpmcc RPM_SMD_XO_CLK_SRC>;
3003				clock-names = "iface",
3004					      "ref";
3005
3006				#clock-cells = <1>;
3007				#phy-cells = <0>;
3008
3009				status = "disabled";
3010			};
3011		};
3012
3013		mmss_smmu: iommu@cd00000 {
3014			compatible = "qcom,msm8998-smmu-v2", "qcom,smmu-v2";
3015			reg = <0x0cd00000 0x40000>;
3016			#iommu-cells = <1>;
3017
3018			clocks = <&mmcc MNOC_AHB_CLK>,
3019				 <&mmcc BIMC_SMMU_AHB_CLK>,
3020				 <&mmcc BIMC_SMMU_AXI_CLK>;
3021			clock-names = "iface-mm",
3022				      "iface-smmu",
3023				      "bus-smmu";
3024
3025			#global-interrupts = <0>;
3026			interrupts =
3027				<GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>,
3028				<GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>,
3029				<GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>,
3030				<GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
3031				<GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
3032				<GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
3033				<GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
3034				<GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
3035				<GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
3036				<GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
3037				<GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
3038				<GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>,
3039				<GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
3040				<GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
3041				<GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>,
3042				<GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
3043				<GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
3044				<GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>,
3045				<GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>,
3046				<GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
3047
3048			power-domains = <&mmcc BIMC_SMMU_GDSC>;
3049		};
3050
3051		remoteproc_adsp: remoteproc@17300000 {
3052			compatible = "qcom,msm8998-adsp-pas";
3053			reg = <0x17300000 0x4040>;
3054
3055			interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
3056					      <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
3057					      <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
3058					      <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
3059					      <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
3060			interrupt-names = "wdog", "fatal", "ready",
3061					  "handover", "stop-ack";
3062
3063			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
3064			clock-names = "xo";
3065
3066			memory-region = <&adsp_mem>;
3067
3068			qcom,smem-states = <&adsp_smp2p_out 0>;
3069			qcom,smem-state-names = "stop";
3070
3071			power-domains = <&rpmpd MSM8998_VDDCX>;
3072			power-domain-names = "cx";
3073
3074			status = "disabled";
3075
3076			glink-edge {
3077				interrupts = <GIC_SPI 157 IRQ_TYPE_EDGE_RISING>;
3078				label = "lpass";
3079				qcom,remote-pid = <2>;
3080				mboxes = <&apcs_glb 9>;
3081			};
3082		};
3083
3084		apcs_glb: mailbox@17911000 {
3085			compatible = "qcom,msm8998-apcs-hmss-global",
3086				     "qcom,msm8994-apcs-kpss-global";
3087			reg = <0x17911000 0x1000>;
3088
3089			#mbox-cells = <1>;
3090		};
3091
3092		timer@17920000 {
3093			#address-cells = <1>;
3094			#size-cells = <1>;
3095			ranges;
3096			compatible = "arm,armv7-timer-mem";
3097			reg = <0x17920000 0x1000>;
3098
3099			frame@17921000 {
3100				frame-number = <0>;
3101				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
3102					     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
3103				reg = <0x17921000 0x1000>,
3104				      <0x17922000 0x1000>;
3105			};
3106
3107			frame@17923000 {
3108				frame-number = <1>;
3109				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
3110				reg = <0x17923000 0x1000>;
3111				status = "disabled";
3112			};
3113
3114			frame@17924000 {
3115				frame-number = <2>;
3116				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
3117				reg = <0x17924000 0x1000>;
3118				status = "disabled";
3119			};
3120
3121			frame@17925000 {
3122				frame-number = <3>;
3123				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
3124				reg = <0x17925000 0x1000>;
3125				status = "disabled";
3126			};
3127
3128			frame@17926000 {
3129				frame-number = <4>;
3130				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
3131				reg = <0x17926000 0x1000>;
3132				status = "disabled";
3133			};
3134
3135			frame@17927000 {
3136				frame-number = <5>;
3137				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
3138				reg = <0x17927000 0x1000>;
3139				status = "disabled";
3140			};
3141
3142			frame@17928000 {
3143				frame-number = <6>;
3144				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
3145				reg = <0x17928000 0x1000>;
3146				status = "disabled";
3147			};
3148		};
3149
3150		intc: interrupt-controller@17a00000 {
3151			compatible = "arm,gic-v3";
3152			reg = <0x17a00000 0x10000>,       /* GICD */
3153			      <0x17b00000 0x100000>;      /* GICR * 8 */
3154			#interrupt-cells = <3>;
3155			#address-cells = <1>;
3156			#size-cells = <1>;
3157			ranges;
3158			interrupt-controller;
3159			#redistributor-regions = <1>;
3160			redistributor-stride = <0x0 0x20000>;
3161			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
3162		};
3163
3164		wifi: wifi@18800000 {
3165			compatible = "qcom,wcn3990-wifi";
3166			status = "disabled";
3167			reg = <0x18800000 0x800000>;
3168			reg-names = "membase";
3169			memory-region = <&wlan_msa_mem>;
3170			clocks = <&rpmcc RPM_SMD_RF_CLK2_PIN>;
3171			clock-names = "cxo_ref_clk_pin";
3172			interrupts =
3173				<GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>,
3174				<GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>,
3175				<GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH>,
3176				<GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
3177				<GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
3178				<GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
3179				<GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>,
3180				<GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
3181				<GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
3182				<GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
3183				<GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
3184				<GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>;
3185			iommus = <&anoc2_smmu 0x1900>,
3186				 <&anoc2_smmu 0x1901>;
3187			qcom,snoc-host-cap-8bit-quirk;
3188		};
3189	};
3190};
3191