1// SPDX-License-Identifier: GPL-2.0-only 2/* 3 * Copyright (c) 2014-2015, The Linux Foundation. All rights reserved. 4 */ 5 6#include <dt-bindings/interrupt-controller/arm-gic.h> 7#include <dt-bindings/clock/qcom,gcc-msm8996.h> 8#include <dt-bindings/clock/qcom,mmcc-msm8996.h> 9#include <dt-bindings/clock/qcom,rpmcc.h> 10#include <dt-bindings/interconnect/qcom,msm8996.h> 11#include <dt-bindings/interconnect/qcom,msm8996-cbf.h> 12#include <dt-bindings/firmware/qcom,scm.h> 13#include <dt-bindings/gpio/gpio.h> 14#include <dt-bindings/power/qcom-rpmpd.h> 15#include <dt-bindings/soc/qcom,apr.h> 16#include <dt-bindings/thermal/thermal.h> 17 18/ { 19 interrupt-parent = <&intc>; 20 21 #address-cells = <2>; 22 #size-cells = <2>; 23 24 chosen { }; 25 26 clocks { 27 xo_board: xo-board { 28 compatible = "fixed-clock"; 29 #clock-cells = <0>; 30 clock-frequency = <19200000>; 31 clock-output-names = "xo_board"; 32 }; 33 34 sleep_clk: sleep-clk { 35 compatible = "fixed-clock"; 36 #clock-cells = <0>; 37 clock-frequency = <32764>; 38 clock-output-names = "sleep_clk"; 39 }; 40 }; 41 42 cpus { 43 #address-cells = <2>; 44 #size-cells = <0>; 45 46 CPU0: cpu@0 { 47 device_type = "cpu"; 48 compatible = "qcom,kryo"; 49 reg = <0x0 0x0>; 50 enable-method = "psci"; 51 cpu-idle-states = <&CPU_SLEEP_0>; 52 capacity-dmips-mhz = <1024>; 53 clocks = <&kryocc 0>; 54 interconnects = <&cbf MASTER_CBF_M4M &cbf SLAVE_CBF_M4M>; 55 operating-points-v2 = <&cluster0_opp>; 56 #cooling-cells = <2>; 57 next-level-cache = <&L2_0>; 58 L2_0: l2-cache { 59 compatible = "cache"; 60 cache-level = <2>; 61 cache-unified; 62 }; 63 }; 64 65 CPU1: cpu@1 { 66 device_type = "cpu"; 67 compatible = "qcom,kryo"; 68 reg = <0x0 0x1>; 69 enable-method = "psci"; 70 cpu-idle-states = <&CPU_SLEEP_0>; 71 capacity-dmips-mhz = <1024>; 72 clocks = <&kryocc 0>; 73 interconnects = <&cbf MASTER_CBF_M4M &cbf SLAVE_CBF_M4M>; 74 operating-points-v2 = <&cluster0_opp>; 75 #cooling-cells = <2>; 76 next-level-cache = <&L2_0>; 77 }; 78 79 CPU2: cpu@100 { 80 device_type = "cpu"; 81 compatible = "qcom,kryo"; 82 reg = <0x0 0x100>; 83 enable-method = "psci"; 84 cpu-idle-states = <&CPU_SLEEP_0>; 85 capacity-dmips-mhz = <1024>; 86 clocks = <&kryocc 1>; 87 interconnects = <&cbf MASTER_CBF_M4M &cbf SLAVE_CBF_M4M>; 88 operating-points-v2 = <&cluster1_opp>; 89 #cooling-cells = <2>; 90 next-level-cache = <&L2_1>; 91 L2_1: l2-cache { 92 compatible = "cache"; 93 cache-level = <2>; 94 cache-unified; 95 }; 96 }; 97 98 CPU3: cpu@101 { 99 device_type = "cpu"; 100 compatible = "qcom,kryo"; 101 reg = <0x0 0x101>; 102 enable-method = "psci"; 103 cpu-idle-states = <&CPU_SLEEP_0>; 104 capacity-dmips-mhz = <1024>; 105 clocks = <&kryocc 1>; 106 interconnects = <&cbf MASTER_CBF_M4M &cbf SLAVE_CBF_M4M>; 107 operating-points-v2 = <&cluster1_opp>; 108 #cooling-cells = <2>; 109 next-level-cache = <&L2_1>; 110 }; 111 112 cpu-map { 113 cluster0 { 114 core0 { 115 cpu = <&CPU0>; 116 }; 117 118 core1 { 119 cpu = <&CPU1>; 120 }; 121 }; 122 123 cluster1 { 124 core0 { 125 cpu = <&CPU2>; 126 }; 127 128 core1 { 129 cpu = <&CPU3>; 130 }; 131 }; 132 }; 133 134 idle-states { 135 entry-method = "psci"; 136 137 CPU_SLEEP_0: cpu-sleep-0 { 138 compatible = "arm,idle-state"; 139 idle-state-name = "standalone-power-collapse"; 140 arm,psci-suspend-param = <0x00000004>; 141 entry-latency-us = <130>; 142 exit-latency-us = <80>; 143 min-residency-us = <300>; 144 }; 145 }; 146 }; 147 148 cluster0_opp: opp-table-cluster0 { 149 compatible = "operating-points-v2-kryo-cpu"; 150 nvmem-cells = <&speedbin_efuse>; 151 opp-shared; 152 153 /* Nominal fmax for now */ 154 opp-307200000 { 155 opp-hz = /bits/ 64 <307200000>; 156 opp-supported-hw = <0xf>; 157 clock-latency-ns = <200000>; 158 opp-peak-kBps = <307200>; 159 }; 160 opp-422400000 { 161 opp-hz = /bits/ 64 <422400000>; 162 opp-supported-hw = <0xf>; 163 clock-latency-ns = <200000>; 164 opp-peak-kBps = <307200>; 165 }; 166 opp-480000000 { 167 opp-hz = /bits/ 64 <480000000>; 168 opp-supported-hw = <0xf>; 169 clock-latency-ns = <200000>; 170 opp-peak-kBps = <307200>; 171 }; 172 opp-556800000 { 173 opp-hz = /bits/ 64 <556800000>; 174 opp-supported-hw = <0xf>; 175 clock-latency-ns = <200000>; 176 opp-peak-kBps = <307200>; 177 }; 178 opp-652800000 { 179 opp-hz = /bits/ 64 <652800000>; 180 opp-supported-hw = <0xf>; 181 clock-latency-ns = <200000>; 182 opp-peak-kBps = <384000>; 183 }; 184 opp-729600000 { 185 opp-hz = /bits/ 64 <729600000>; 186 opp-supported-hw = <0xf>; 187 clock-latency-ns = <200000>; 188 opp-peak-kBps = <460800>; 189 }; 190 opp-844800000 { 191 opp-hz = /bits/ 64 <844800000>; 192 opp-supported-hw = <0xf>; 193 clock-latency-ns = <200000>; 194 opp-peak-kBps = <537600>; 195 }; 196 opp-960000000 { 197 opp-hz = /bits/ 64 <960000000>; 198 opp-supported-hw = <0xf>; 199 clock-latency-ns = <200000>; 200 opp-peak-kBps = <672000>; 201 }; 202 opp-1036800000 { 203 opp-hz = /bits/ 64 <1036800000>; 204 opp-supported-hw = <0xf>; 205 clock-latency-ns = <200000>; 206 opp-peak-kBps = <672000>; 207 }; 208 opp-1113600000 { 209 opp-hz = /bits/ 64 <1113600000>; 210 opp-supported-hw = <0xf>; 211 clock-latency-ns = <200000>; 212 opp-peak-kBps = <825600>; 213 }; 214 opp-1190400000 { 215 opp-hz = /bits/ 64 <1190400000>; 216 opp-supported-hw = <0xf>; 217 clock-latency-ns = <200000>; 218 opp-peak-kBps = <825600>; 219 }; 220 opp-1228800000 { 221 opp-hz = /bits/ 64 <1228800000>; 222 opp-supported-hw = <0xf>; 223 clock-latency-ns = <200000>; 224 opp-peak-kBps = <902400>; 225 }; 226 opp-1324800000 { 227 opp-hz = /bits/ 64 <1324800000>; 228 opp-supported-hw = <0xd>; 229 clock-latency-ns = <200000>; 230 opp-peak-kBps = <1056000>; 231 }; 232 opp-1363200000 { 233 opp-hz = /bits/ 64 <1363200000>; 234 opp-supported-hw = <0x2>; 235 clock-latency-ns = <200000>; 236 opp-peak-kBps = <1132800>; 237 }; 238 opp-1401600000 { 239 opp-hz = /bits/ 64 <1401600000>; 240 opp-supported-hw = <0xd>; 241 clock-latency-ns = <200000>; 242 opp-peak-kBps = <1132800>; 243 }; 244 opp-1478400000 { 245 opp-hz = /bits/ 64 <1478400000>; 246 opp-supported-hw = <0x9>; 247 clock-latency-ns = <200000>; 248 opp-peak-kBps = <1190400>; 249 }; 250 opp-1497600000 { 251 opp-hz = /bits/ 64 <1497600000>; 252 opp-supported-hw = <0x04>; 253 clock-latency-ns = <200000>; 254 opp-peak-kBps = <1305600>; 255 }; 256 opp-1593600000 { 257 opp-hz = /bits/ 64 <1593600000>; 258 opp-supported-hw = <0x9>; 259 clock-latency-ns = <200000>; 260 opp-peak-kBps = <1382400>; 261 }; 262 }; 263 264 cluster1_opp: opp-table-cluster1 { 265 compatible = "operating-points-v2-kryo-cpu"; 266 nvmem-cells = <&speedbin_efuse>; 267 opp-shared; 268 269 /* Nominal fmax for now */ 270 opp-307200000 { 271 opp-hz = /bits/ 64 <307200000>; 272 opp-supported-hw = <0xf>; 273 clock-latency-ns = <200000>; 274 opp-peak-kBps = <307200>; 275 }; 276 opp-403200000 { 277 opp-hz = /bits/ 64 <403200000>; 278 opp-supported-hw = <0xf>; 279 clock-latency-ns = <200000>; 280 opp-peak-kBps = <307200>; 281 }; 282 opp-480000000 { 283 opp-hz = /bits/ 64 <480000000>; 284 opp-supported-hw = <0xf>; 285 clock-latency-ns = <200000>; 286 opp-peak-kBps = <307200>; 287 }; 288 opp-556800000 { 289 opp-hz = /bits/ 64 <556800000>; 290 opp-supported-hw = <0xf>; 291 clock-latency-ns = <200000>; 292 opp-peak-kBps = <307200>; 293 }; 294 opp-652800000 { 295 opp-hz = /bits/ 64 <652800000>; 296 opp-supported-hw = <0xf>; 297 clock-latency-ns = <200000>; 298 opp-peak-kBps = <307200>; 299 }; 300 opp-729600000 { 301 opp-hz = /bits/ 64 <729600000>; 302 opp-supported-hw = <0xf>; 303 clock-latency-ns = <200000>; 304 opp-peak-kBps = <307200>; 305 }; 306 opp-806400000 { 307 opp-hz = /bits/ 64 <806400000>; 308 opp-supported-hw = <0xf>; 309 clock-latency-ns = <200000>; 310 opp-peak-kBps = <384000>; 311 }; 312 opp-883200000 { 313 opp-hz = /bits/ 64 <883200000>; 314 opp-supported-hw = <0xf>; 315 clock-latency-ns = <200000>; 316 opp-peak-kBps = <460800>; 317 }; 318 opp-940800000 { 319 opp-hz = /bits/ 64 <940800000>; 320 opp-supported-hw = <0xf>; 321 clock-latency-ns = <200000>; 322 opp-peak-kBps = <537600>; 323 }; 324 opp-1036800000 { 325 opp-hz = /bits/ 64 <1036800000>; 326 opp-supported-hw = <0xf>; 327 clock-latency-ns = <200000>; 328 opp-peak-kBps = <595200>; 329 }; 330 opp-1113600000 { 331 opp-hz = /bits/ 64 <1113600000>; 332 opp-supported-hw = <0xf>; 333 clock-latency-ns = <200000>; 334 opp-peak-kBps = <672000>; 335 }; 336 opp-1190400000 { 337 opp-hz = /bits/ 64 <1190400000>; 338 opp-supported-hw = <0xf>; 339 clock-latency-ns = <200000>; 340 opp-peak-kBps = <672000>; 341 }; 342 opp-1248000000 { 343 opp-hz = /bits/ 64 <1248000000>; 344 opp-supported-hw = <0xf>; 345 clock-latency-ns = <200000>; 346 opp-peak-kBps = <748800>; 347 }; 348 opp-1324800000 { 349 opp-hz = /bits/ 64 <1324800000>; 350 opp-supported-hw = <0xf>; 351 clock-latency-ns = <200000>; 352 opp-peak-kBps = <825600>; 353 }; 354 opp-1401600000 { 355 opp-hz = /bits/ 64 <1401600000>; 356 opp-supported-hw = <0xf>; 357 clock-latency-ns = <200000>; 358 opp-peak-kBps = <902400>; 359 }; 360 opp-1478400000 { 361 opp-hz = /bits/ 64 <1478400000>; 362 opp-supported-hw = <0xf>; 363 clock-latency-ns = <200000>; 364 opp-peak-kBps = <979200>; 365 }; 366 opp-1555200000 { 367 opp-hz = /bits/ 64 <1555200000>; 368 opp-supported-hw = <0xf>; 369 clock-latency-ns = <200000>; 370 opp-peak-kBps = <1056000>; 371 }; 372 opp-1632000000 { 373 opp-hz = /bits/ 64 <1632000000>; 374 opp-supported-hw = <0xf>; 375 clock-latency-ns = <200000>; 376 opp-peak-kBps = <1190400>; 377 }; 378 opp-1708800000 { 379 opp-hz = /bits/ 64 <1708800000>; 380 opp-supported-hw = <0xf>; 381 clock-latency-ns = <200000>; 382 opp-peak-kBps = <1228800>; 383 }; 384 opp-1785600000 { 385 opp-hz = /bits/ 64 <1785600000>; 386 opp-supported-hw = <0xf>; 387 clock-latency-ns = <200000>; 388 opp-peak-kBps = <1305600>; 389 }; 390 opp-1804800000 { 391 opp-hz = /bits/ 64 <1804800000>; 392 opp-supported-hw = <0xe>; 393 clock-latency-ns = <200000>; 394 opp-peak-kBps = <1305600>; 395 }; 396 opp-1824000000 { 397 opp-hz = /bits/ 64 <1824000000>; 398 opp-supported-hw = <0x1>; 399 clock-latency-ns = <200000>; 400 opp-peak-kBps = <1382400>; 401 }; 402 opp-1900800000 { 403 opp-hz = /bits/ 64 <1900800000>; 404 opp-supported-hw = <0x4>; 405 clock-latency-ns = <200000>; 406 opp-peak-kBps = <1305600>; 407 }; 408 opp-1920000000 { 409 opp-hz = /bits/ 64 <1920000000>; 410 opp-supported-hw = <0x1>; 411 clock-latency-ns = <200000>; 412 opp-peak-kBps = <1459200>; 413 }; 414 opp-1996800000 { 415 opp-hz = /bits/ 64 <1996800000>; 416 opp-supported-hw = <0x1>; 417 clock-latency-ns = <200000>; 418 opp-peak-kBps = <1593600>; 419 }; 420 opp-2073600000 { 421 opp-hz = /bits/ 64 <2073600000>; 422 opp-supported-hw = <0x1>; 423 clock-latency-ns = <200000>; 424 opp-peak-kBps = <1593600>; 425 }; 426 opp-2150400000 { 427 opp-hz = /bits/ 64 <2150400000>; 428 opp-supported-hw = <0x1>; 429 clock-latency-ns = <200000>; 430 opp-peak-kBps = <1593600>; 431 }; 432 }; 433 434 firmware { 435 scm { 436 compatible = "qcom,scm-msm8996", "qcom,scm"; 437 qcom,dload-mode = <&tcsr_2 0x13000>; 438 }; 439 }; 440 441 memory@80000000 { 442 device_type = "memory"; 443 /* We expect the bootloader to fill in the reg */ 444 reg = <0x0 0x80000000 0x0 0x0>; 445 }; 446 447 etm { 448 compatible = "qcom,coresight-remote-etm"; 449 450 out-ports { 451 port { 452 modem_etm_out_funnel_in2: endpoint { 453 remote-endpoint = 454 <&funnel_in2_in_modem_etm>; 455 }; 456 }; 457 }; 458 }; 459 460 psci { 461 compatible = "arm,psci-1.0"; 462 method = "smc"; 463 }; 464 465 rpm: remoteproc { 466 compatible = "qcom,msm8996-rpm-proc", "qcom,rpm-proc"; 467 468 glink-edge { 469 compatible = "qcom,glink-rpm"; 470 interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>; 471 qcom,rpm-msg-ram = <&rpm_msg_ram>; 472 mboxes = <&apcs_glb 0>; 473 474 rpm_requests: rpm-requests { 475 compatible = "qcom,rpm-msm8996"; 476 qcom,glink-channels = "rpm_requests"; 477 478 rpmcc: clock-controller { 479 compatible = "qcom,rpmcc-msm8996", "qcom,rpmcc"; 480 #clock-cells = <1>; 481 clocks = <&xo_board>; 482 clock-names = "xo"; 483 }; 484 485 rpmpd: power-controller { 486 compatible = "qcom,msm8996-rpmpd"; 487 #power-domain-cells = <1>; 488 operating-points-v2 = <&rpmpd_opp_table>; 489 490 rpmpd_opp_table: opp-table { 491 compatible = "operating-points-v2"; 492 493 rpmpd_opp1: opp1 { 494 opp-level = <1>; 495 }; 496 497 rpmpd_opp2: opp2 { 498 opp-level = <2>; 499 }; 500 501 rpmpd_opp3: opp3 { 502 opp-level = <3>; 503 }; 504 505 rpmpd_opp4: opp4 { 506 opp-level = <4>; 507 }; 508 509 rpmpd_opp5: opp5 { 510 opp-level = <5>; 511 }; 512 513 rpmpd_opp6: opp6 { 514 opp-level = <6>; 515 }; 516 }; 517 }; 518 }; 519 }; 520 }; 521 522 reserved-memory { 523 #address-cells = <2>; 524 #size-cells = <2>; 525 ranges; 526 527 hyp_mem: memory@85800000 { 528 reg = <0x0 0x85800000 0x0 0x600000>; 529 no-map; 530 }; 531 532 xbl_mem: memory@85e00000 { 533 reg = <0x0 0x85e00000 0x0 0x200000>; 534 no-map; 535 }; 536 537 smem_mem: smem-mem@86000000 { 538 reg = <0x0 0x86000000 0x0 0x200000>; 539 no-map; 540 }; 541 542 tz_mem: memory@86200000 { 543 reg = <0x0 0x86200000 0x0 0x2600000>; 544 no-map; 545 }; 546 547 rmtfs_mem: rmtfs { 548 compatible = "qcom,rmtfs-mem"; 549 550 size = <0x0 0x200000>; 551 alloc-ranges = <0x0 0xa0000000 0x0 0x2000000>; 552 no-map; 553 554 qcom,client-id = <1>; 555 qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>; 556 }; 557 558 mpss_mem: mpss@88800000 { 559 reg = <0x0 0x88800000 0x0 0x6200000>; 560 no-map; 561 }; 562 563 adsp_mem: adsp@8ea00000 { 564 reg = <0x0 0x8ea00000 0x0 0x1b00000>; 565 no-map; 566 }; 567 568 slpi_mem: slpi@90500000 { 569 reg = <0x0 0x90500000 0x0 0xa00000>; 570 no-map; 571 }; 572 573 gpu_mem: gpu@90f00000 { 574 compatible = "shared-dma-pool"; 575 reg = <0x0 0x90f00000 0x0 0x100000>; 576 no-map; 577 }; 578 579 venus_mem: venus@91000000 { 580 reg = <0x0 0x91000000 0x0 0x500000>; 581 no-map; 582 }; 583 584 mba_mem: mba@91500000 { 585 reg = <0x0 0x91500000 0x0 0x200000>; 586 no-map; 587 }; 588 589 mdata_mem: mpss-metadata { 590 alloc-ranges = <0x0 0xa0000000 0x0 0x20000000>; 591 size = <0x0 0x4000>; 592 no-map; 593 }; 594 }; 595 596 smem { 597 compatible = "qcom,smem"; 598 memory-region = <&smem_mem>; 599 hwlocks = <&tcsr_mutex 3>; 600 }; 601 602 smp2p-adsp { 603 compatible = "qcom,smp2p"; 604 qcom,smem = <443>, <429>; 605 606 interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>; 607 608 mboxes = <&apcs_glb 10>; 609 610 qcom,local-pid = <0>; 611 qcom,remote-pid = <2>; 612 613 adsp_smp2p_out: master-kernel { 614 qcom,entry-name = "master-kernel"; 615 #qcom,smem-state-cells = <1>; 616 }; 617 618 adsp_smp2p_in: slave-kernel { 619 qcom,entry-name = "slave-kernel"; 620 621 interrupt-controller; 622 #interrupt-cells = <2>; 623 }; 624 }; 625 626 smp2p-mpss { 627 compatible = "qcom,smp2p"; 628 qcom,smem = <435>, <428>; 629 630 interrupts = <GIC_SPI 451 IRQ_TYPE_EDGE_RISING>; 631 632 mboxes = <&apcs_glb 14>; 633 634 qcom,local-pid = <0>; 635 qcom,remote-pid = <1>; 636 637 mpss_smp2p_out: master-kernel { 638 qcom,entry-name = "master-kernel"; 639 #qcom,smem-state-cells = <1>; 640 }; 641 642 mpss_smp2p_in: slave-kernel { 643 qcom,entry-name = "slave-kernel"; 644 645 interrupt-controller; 646 #interrupt-cells = <2>; 647 }; 648 }; 649 650 smp2p-slpi { 651 compatible = "qcom,smp2p"; 652 qcom,smem = <481>, <430>; 653 654 interrupts = <GIC_SPI 178 IRQ_TYPE_EDGE_RISING>; 655 656 mboxes = <&apcs_glb 26>; 657 658 qcom,local-pid = <0>; 659 qcom,remote-pid = <3>; 660 661 slpi_smp2p_out: master-kernel { 662 qcom,entry-name = "master-kernel"; 663 #qcom,smem-state-cells = <1>; 664 }; 665 666 slpi_smp2p_in: slave-kernel { 667 qcom,entry-name = "slave-kernel"; 668 669 interrupt-controller; 670 #interrupt-cells = <2>; 671 }; 672 }; 673 674 soc: soc@0 { 675 #address-cells = <1>; 676 #size-cells = <1>; 677 ranges = <0 0 0 0xffffffff>; 678 compatible = "simple-bus"; 679 680 pcie_phy: phy-wrapper@34000 { 681 compatible = "qcom,msm8996-qmp-pcie-phy"; 682 reg = <0x00034000 0x488>; 683 #address-cells = <1>; 684 #size-cells = <1>; 685 ranges = <0x0 0x00034000 0x4000>; 686 687 clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>, 688 <&gcc GCC_PCIE_PHY_CFG_AHB_CLK>, 689 <&gcc GCC_PCIE_CLKREF_CLK>; 690 clock-names = "aux", "cfg_ahb", "ref"; 691 692 resets = <&gcc GCC_PCIE_PHY_BCR>, 693 <&gcc GCC_PCIE_PHY_COM_BCR>, 694 <&gcc GCC_PCIE_PHY_COM_NOCSR_BCR>; 695 reset-names = "phy", "common", "cfg"; 696 697 status = "disabled"; 698 699 pciephy_0: phy@1000 { 700 reg = <0x1000 0x130>, 701 <0x1200 0x200>, 702 <0x1400 0x1dc>; 703 704 clocks = <&gcc GCC_PCIE_0_PIPE_CLK>; 705 clock-names = "pipe0"; 706 resets = <&gcc GCC_PCIE_0_PHY_BCR>; 707 reset-names = "lane0"; 708 709 #clock-cells = <0>; 710 clock-output-names = "pcie_0_pipe_clk_src"; 711 712 #phy-cells = <0>; 713 }; 714 715 pciephy_1: phy@2000 { 716 reg = <0x2000 0x130>, 717 <0x2200 0x200>, 718 <0x2400 0x1dc>; 719 720 clocks = <&gcc GCC_PCIE_1_PIPE_CLK>; 721 clock-names = "pipe1"; 722 resets = <&gcc GCC_PCIE_1_PHY_BCR>; 723 reset-names = "lane1"; 724 725 #clock-cells = <0>; 726 clock-output-names = "pcie_1_pipe_clk_src"; 727 728 #phy-cells = <0>; 729 }; 730 731 pciephy_2: phy@3000 { 732 reg = <0x3000 0x130>, 733 <0x3200 0x200>, 734 <0x3400 0x1dc>; 735 736 clocks = <&gcc GCC_PCIE_2_PIPE_CLK>; 737 clock-names = "pipe2"; 738 resets = <&gcc GCC_PCIE_2_PHY_BCR>; 739 reset-names = "lane2"; 740 741 #clock-cells = <0>; 742 clock-output-names = "pcie_2_pipe_clk_src"; 743 744 #phy-cells = <0>; 745 }; 746 }; 747 748 rpm_msg_ram: sram@68000 { 749 compatible = "qcom,rpm-msg-ram"; 750 reg = <0x00068000 0x6000>; 751 }; 752 753 qfprom@74000 { 754 compatible = "qcom,msm8996-qfprom", "qcom,qfprom"; 755 reg = <0x00074000 0x8ff>; 756 #address-cells = <1>; 757 #size-cells = <1>; 758 759 qusb2p_hstx_trim: hstx-trim@24e { 760 reg = <0x24e 0x2>; 761 bits = <5 4>; 762 }; 763 764 qusb2s_hstx_trim: hstx-trim@24f { 765 reg = <0x24f 0x1>; 766 bits = <1 4>; 767 }; 768 769 speedbin_efuse: speedbin@133 { 770 reg = <0x133 0x1>; 771 bits = <5 3>; 772 }; 773 }; 774 775 rng: rng@83000 { 776 compatible = "qcom,prng-ee"; 777 reg = <0x00083000 0x1000>; 778 clocks = <&gcc GCC_PRNG_AHB_CLK>; 779 clock-names = "core"; 780 }; 781 782 gcc: clock-controller@300000 { 783 compatible = "qcom,gcc-msm8996"; 784 #clock-cells = <1>; 785 #reset-cells = <1>; 786 #power-domain-cells = <1>; 787 reg = <0x00300000 0x90000>; 788 789 clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, 790 <&rpmcc RPM_SMD_LN_BB_CLK>, 791 <&sleep_clk>, 792 <&pciephy_0>, 793 <&pciephy_1>, 794 <&pciephy_2>, 795 <&usb3phy>, 796 <&ufsphy 0>, 797 <&ufsphy 1>, 798 <&ufsphy 2>; 799 clock-names = "cxo", 800 "cxo2", 801 "sleep_clk", 802 "pcie_0_pipe_clk_src", 803 "pcie_1_pipe_clk_src", 804 "pcie_2_pipe_clk_src", 805 "usb3_phy_pipe_clk_src", 806 "ufs_rx_symbol_0_clk_src", 807 "ufs_rx_symbol_1_clk_src", 808 "ufs_tx_symbol_0_clk_src"; 809 }; 810 811 bimc: interconnect@408000 { 812 compatible = "qcom,msm8996-bimc"; 813 reg = <0x00408000 0x5a000>; 814 #interconnect-cells = <1>; 815 }; 816 817 tsens0: thermal-sensor@4a9000 { 818 compatible = "qcom,msm8996-tsens", "qcom,tsens-v2"; 819 reg = <0x004a9000 0x1000>, /* TM */ 820 <0x004a8000 0x1000>; /* SROT */ 821 #qcom,sensors = <13>; 822 interrupts = <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>, 823 <GIC_SPI 445 IRQ_TYPE_LEVEL_HIGH>; 824 interrupt-names = "uplow", "critical"; 825 #thermal-sensor-cells = <1>; 826 }; 827 828 tsens1: thermal-sensor@4ad000 { 829 compatible = "qcom,msm8996-tsens", "qcom,tsens-v2"; 830 reg = <0x004ad000 0x1000>, /* TM */ 831 <0x004ac000 0x1000>; /* SROT */ 832 #qcom,sensors = <8>; 833 interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>, 834 <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>; 835 interrupt-names = "uplow", "critical"; 836 #thermal-sensor-cells = <1>; 837 }; 838 839 cryptobam: dma-controller@644000 { 840 compatible = "qcom,bam-v1.7.0"; 841 reg = <0x00644000 0x24000>; 842 interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>; 843 clocks = <&gcc GCC_CE1_CLK>; 844 clock-names = "bam_clk"; 845 #dma-cells = <1>; 846 qcom,ee = <0>; 847 qcom,controlled-remotely; 848 }; 849 850 crypto: crypto@67a000 { 851 compatible = "qcom,crypto-v5.4"; 852 reg = <0x0067a000 0x6000>; 853 clocks = <&gcc GCC_CE1_AHB_CLK>, 854 <&gcc GCC_CE1_AXI_CLK>, 855 <&gcc GCC_CE1_CLK>; 856 clock-names = "iface", "bus", "core"; 857 dmas = <&cryptobam 6>, <&cryptobam 7>; 858 dma-names = "rx", "tx"; 859 }; 860 861 cnoc: interconnect@500000 { 862 compatible = "qcom,msm8996-cnoc"; 863 reg = <0x00500000 0x1000>; 864 #interconnect-cells = <1>; 865 }; 866 867 snoc: interconnect@524000 { 868 compatible = "qcom,msm8996-snoc"; 869 reg = <0x00524000 0x1c000>; 870 #interconnect-cells = <1>; 871 }; 872 873 a0noc: interconnect@543000 { 874 compatible = "qcom,msm8996-a0noc"; 875 reg = <0x00543000 0x6000>; 876 #interconnect-cells = <1>; 877 clock-names = "aggre0_snoc_axi", 878 "aggre0_cnoc_ahb", 879 "aggre0_noc_mpu_cfg"; 880 clocks = <&gcc GCC_AGGRE0_SNOC_AXI_CLK>, 881 <&gcc GCC_AGGRE0_CNOC_AHB_CLK>, 882 <&gcc GCC_AGGRE0_NOC_MPU_CFG_AHB_CLK>; 883 power-domains = <&gcc AGGRE0_NOC_GDSC>; 884 }; 885 886 a1noc: interconnect@562000 { 887 compatible = "qcom,msm8996-a1noc"; 888 reg = <0x00562000 0x5000>; 889 #interconnect-cells = <1>; 890 }; 891 892 a2noc: interconnect@583000 { 893 compatible = "qcom,msm8996-a2noc"; 894 reg = <0x00583000 0x7000>; 895 #interconnect-cells = <1>; 896 clock-names = "aggre2_ufs_axi", "ufs_axi"; 897 clocks = <&gcc GCC_AGGRE2_UFS_AXI_CLK>, 898 <&gcc GCC_UFS_AXI_CLK>; 899 }; 900 901 mnoc: interconnect@5a4000 { 902 compatible = "qcom,msm8996-mnoc"; 903 reg = <0x005a4000 0x1c000>; 904 #interconnect-cells = <1>; 905 clock-names = "iface"; 906 clocks = <&mmcc AHB_CLK_SRC>; 907 }; 908 909 pnoc: interconnect@5c0000 { 910 compatible = "qcom,msm8996-pnoc"; 911 reg = <0x005c0000 0x3000>; 912 #interconnect-cells = <1>; 913 }; 914 915 tcsr_mutex: hwlock@740000 { 916 compatible = "qcom,tcsr-mutex"; 917 reg = <0x00740000 0x20000>; 918 #hwlock-cells = <1>; 919 }; 920 921 tcsr_1: syscon@760000 { 922 compatible = "qcom,tcsr-msm8996", "syscon"; 923 reg = <0x00760000 0x20000>; 924 }; 925 926 tcsr_2: syscon@7a0000 { 927 compatible = "qcom,tcsr-msm8996", "syscon"; 928 reg = <0x007a0000 0x18000>; 929 }; 930 931 mmcc: clock-controller@8c0000 { 932 compatible = "qcom,mmcc-msm8996"; 933 #clock-cells = <1>; 934 #reset-cells = <1>; 935 #power-domain-cells = <1>; 936 reg = <0x008c0000 0x40000>; 937 clocks = <&xo_board>, 938 <&gcc GPLL0>, 939 <&gcc GCC_MMSS_NOC_CFG_AHB_CLK>, 940 <&mdss_dsi0_phy 1>, 941 <&mdss_dsi0_phy 0>, 942 <&mdss_dsi1_phy 1>, 943 <&mdss_dsi1_phy 0>, 944 <&mdss_hdmi_phy>; 945 clock-names = "xo", 946 "gpll0", 947 "gcc_mmss_noc_cfg_ahb_clk", 948 "dsi0pll", 949 "dsi0pllbyte", 950 "dsi1pll", 951 "dsi1pllbyte", 952 "hdmipll"; 953 assigned-clocks = <&mmcc MMPLL9_PLL>, 954 <&mmcc MMPLL1_PLL>, 955 <&mmcc MMPLL3_PLL>, 956 <&mmcc MMPLL4_PLL>, 957 <&mmcc MMPLL5_PLL>; 958 assigned-clock-rates = <624000000>, 959 <810000000>, 960 <980000000>, 961 <960000000>, 962 <825000000>; 963 }; 964 965 mdss: display-subsystem@900000 { 966 compatible = "qcom,mdss"; 967 968 reg = <0x00900000 0x1000>, 969 <0x009b0000 0x1040>, 970 <0x009b8000 0x1040>; 971 reg-names = "mdss_phys", 972 "vbif_phys", 973 "vbif_nrt_phys"; 974 975 power-domains = <&mmcc MDSS_GDSC>; 976 interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; 977 978 interrupt-controller; 979 #interrupt-cells = <1>; 980 981 clocks = <&mmcc MDSS_AHB_CLK>, 982 <&mmcc MDSS_MDP_CLK>; 983 clock-names = "iface", "core"; 984 985 #address-cells = <1>; 986 #size-cells = <1>; 987 ranges; 988 989 status = "disabled"; 990 991 mdp: display-controller@901000 { 992 compatible = "qcom,msm8996-mdp5", "qcom,mdp5"; 993 reg = <0x00901000 0x90000>; 994 reg-names = "mdp_phys"; 995 996 interrupt-parent = <&mdss>; 997 interrupts = <0>; 998 999 clocks = <&mmcc MDSS_AHB_CLK>, 1000 <&mmcc MDSS_AXI_CLK>, 1001 <&mmcc MDSS_MDP_CLK>, 1002 <&mmcc SMMU_MDP_AXI_CLK>, 1003 <&mmcc MDSS_VSYNC_CLK>; 1004 clock-names = "iface", 1005 "bus", 1006 "core", 1007 "iommu", 1008 "vsync"; 1009 1010 iommus = <&mdp_smmu 0>; 1011 1012 assigned-clocks = <&mmcc MDSS_MDP_CLK>, 1013 <&mmcc MDSS_VSYNC_CLK>; 1014 assigned-clock-rates = <300000000>, 1015 <19200000>; 1016 1017 interconnects = <&mnoc MASTER_MDP_PORT0 &bimc SLAVE_EBI_CH0>, 1018 <&mnoc MASTER_MDP_PORT1 &bimc SLAVE_EBI_CH0>, 1019 <&mnoc MASTER_ROTATOR &bimc SLAVE_EBI_CH0>; 1020 interconnect-names = "mdp0-mem", "mdp1-mem", "rotator-mem"; 1021 1022 ports { 1023 #address-cells = <1>; 1024 #size-cells = <0>; 1025 1026 port@0 { 1027 reg = <0>; 1028 mdp5_intf3_out: endpoint { 1029 remote-endpoint = <&mdss_hdmi_in>; 1030 }; 1031 }; 1032 1033 port@1 { 1034 reg = <1>; 1035 mdp5_intf1_out: endpoint { 1036 remote-endpoint = <&mdss_dsi0_in>; 1037 }; 1038 }; 1039 1040 port@2 { 1041 reg = <2>; 1042 mdp5_intf2_out: endpoint { 1043 remote-endpoint = <&mdss_dsi1_in>; 1044 }; 1045 }; 1046 }; 1047 }; 1048 1049 mdss_dsi0: dsi@994000 { 1050 compatible = "qcom,msm8996-dsi-ctrl", 1051 "qcom,mdss-dsi-ctrl"; 1052 reg = <0x00994000 0x400>; 1053 reg-names = "dsi_ctrl"; 1054 1055 interrupt-parent = <&mdss>; 1056 interrupts = <4>; 1057 1058 clocks = <&mmcc MDSS_MDP_CLK>, 1059 <&mmcc MDSS_BYTE0_CLK>, 1060 <&mmcc MDSS_AHB_CLK>, 1061 <&mmcc MDSS_AXI_CLK>, 1062 <&mmcc MMSS_MISC_AHB_CLK>, 1063 <&mmcc MDSS_PCLK0_CLK>, 1064 <&mmcc MDSS_ESC0_CLK>; 1065 clock-names = "mdp_core", 1066 "byte", 1067 "iface", 1068 "bus", 1069 "core_mmss", 1070 "pixel", 1071 "core"; 1072 assigned-clocks = <&mmcc BYTE0_CLK_SRC>, <&mmcc PCLK0_CLK_SRC>; 1073 assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>; 1074 1075 phys = <&mdss_dsi0_phy>; 1076 status = "disabled"; 1077 1078 #address-cells = <1>; 1079 #size-cells = <0>; 1080 1081 ports { 1082 #address-cells = <1>; 1083 #size-cells = <0>; 1084 1085 port@0 { 1086 reg = <0>; 1087 mdss_dsi0_in: endpoint { 1088 remote-endpoint = <&mdp5_intf1_out>; 1089 }; 1090 }; 1091 1092 port@1 { 1093 reg = <1>; 1094 mdss_dsi0_out: endpoint { 1095 }; 1096 }; 1097 }; 1098 }; 1099 1100 mdss_dsi0_phy: phy@994400 { 1101 compatible = "qcom,dsi-phy-14nm"; 1102 reg = <0x00994400 0x100>, 1103 <0x00994500 0x300>, 1104 <0x00994800 0x188>; 1105 reg-names = "dsi_phy", 1106 "dsi_phy_lane", 1107 "dsi_pll"; 1108 1109 #clock-cells = <1>; 1110 #phy-cells = <0>; 1111 1112 clocks = <&mmcc MDSS_AHB_CLK>, <&rpmcc RPM_SMD_XO_CLK_SRC>; 1113 clock-names = "iface", "ref"; 1114 status = "disabled"; 1115 }; 1116 1117 mdss_dsi1: dsi@996000 { 1118 compatible = "qcom,msm8996-dsi-ctrl", 1119 "qcom,mdss-dsi-ctrl"; 1120 reg = <0x00996000 0x400>; 1121 reg-names = "dsi_ctrl"; 1122 1123 interrupt-parent = <&mdss>; 1124 interrupts = <5>; 1125 1126 clocks = <&mmcc MDSS_MDP_CLK>, 1127 <&mmcc MDSS_BYTE1_CLK>, 1128 <&mmcc MDSS_AHB_CLK>, 1129 <&mmcc MDSS_AXI_CLK>, 1130 <&mmcc MMSS_MISC_AHB_CLK>, 1131 <&mmcc MDSS_PCLK1_CLK>, 1132 <&mmcc MDSS_ESC1_CLK>; 1133 clock-names = "mdp_core", 1134 "byte", 1135 "iface", 1136 "bus", 1137 "core_mmss", 1138 "pixel", 1139 "core"; 1140 assigned-clocks = <&mmcc BYTE1_CLK_SRC>, <&mmcc PCLK1_CLK_SRC>; 1141 assigned-clock-parents = <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>; 1142 1143 phys = <&mdss_dsi1_phy>; 1144 status = "disabled"; 1145 1146 #address-cells = <1>; 1147 #size-cells = <0>; 1148 1149 ports { 1150 #address-cells = <1>; 1151 #size-cells = <0>; 1152 1153 port@0 { 1154 reg = <0>; 1155 mdss_dsi1_in: endpoint { 1156 remote-endpoint = <&mdp5_intf2_out>; 1157 }; 1158 }; 1159 1160 port@1 { 1161 reg = <1>; 1162 mdss_dsi1_out: endpoint { 1163 }; 1164 }; 1165 }; 1166 }; 1167 1168 mdss_dsi1_phy: phy@996400 { 1169 compatible = "qcom,dsi-phy-14nm"; 1170 reg = <0x00996400 0x100>, 1171 <0x00996500 0x300>, 1172 <0x00996800 0x188>; 1173 reg-names = "dsi_phy", 1174 "dsi_phy_lane", 1175 "dsi_pll"; 1176 1177 #clock-cells = <1>; 1178 #phy-cells = <0>; 1179 1180 clocks = <&mmcc MDSS_AHB_CLK>, <&rpmcc RPM_SMD_XO_CLK_SRC>; 1181 clock-names = "iface", "ref"; 1182 status = "disabled"; 1183 }; 1184 1185 mdss_hdmi: hdmi-tx@9a0000 { 1186 compatible = "qcom,hdmi-tx-8996"; 1187 reg = <0x009a0000 0x50c>, 1188 <0x00070000 0x6158>, 1189 <0x009e0000 0xfff>; 1190 reg-names = "core_physical", 1191 "qfprom_physical", 1192 "hdcp_physical"; 1193 1194 interrupt-parent = <&mdss>; 1195 interrupts = <8>; 1196 1197 clocks = <&mmcc MDSS_MDP_CLK>, 1198 <&mmcc MDSS_AHB_CLK>, 1199 <&mmcc MDSS_HDMI_CLK>, 1200 <&mmcc MDSS_HDMI_AHB_CLK>, 1201 <&mmcc MDSS_EXTPCLK_CLK>; 1202 clock-names = 1203 "mdp_core", 1204 "iface", 1205 "core", 1206 "alt_iface", 1207 "extp"; 1208 1209 phys = <&mdss_hdmi_phy>; 1210 #sound-dai-cells = <1>; 1211 1212 status = "disabled"; 1213 1214 ports { 1215 #address-cells = <1>; 1216 #size-cells = <0>; 1217 1218 port@0 { 1219 reg = <0>; 1220 mdss_hdmi_in: endpoint { 1221 remote-endpoint = <&mdp5_intf3_out>; 1222 }; 1223 }; 1224 }; 1225 }; 1226 1227 mdss_hdmi_phy: phy@9a0600 { 1228 #phy-cells = <0>; 1229 compatible = "qcom,hdmi-phy-8996"; 1230 reg = <0x009a0600 0x1c4>, 1231 <0x009a0a00 0x124>, 1232 <0x009a0c00 0x124>, 1233 <0x009a0e00 0x124>, 1234 <0x009a1000 0x124>, 1235 <0x009a1200 0x0c8>; 1236 reg-names = "hdmi_pll", 1237 "hdmi_tx_l0", 1238 "hdmi_tx_l1", 1239 "hdmi_tx_l2", 1240 "hdmi_tx_l3", 1241 "hdmi_phy"; 1242 1243 clocks = <&mmcc MDSS_AHB_CLK>, 1244 <&gcc GCC_HDMI_CLKREF_CLK>, 1245 <&xo_board>; 1246 clock-names = "iface", 1247 "ref", 1248 "xo"; 1249 1250 #clock-cells = <0>; 1251 1252 status = "disabled"; 1253 }; 1254 }; 1255 1256 gpu: gpu@b00000 { 1257 compatible = "qcom,adreno-530.2", "qcom,adreno"; 1258 1259 reg = <0x00b00000 0x3f000>; 1260 reg-names = "kgsl_3d0_reg_memory"; 1261 1262 interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>; 1263 1264 clocks = <&mmcc GPU_GX_GFX3D_CLK>, 1265 <&mmcc GPU_AHB_CLK>, 1266 <&mmcc GPU_GX_RBBMTIMER_CLK>, 1267 <&gcc GCC_BIMC_GFX_CLK>, 1268 <&gcc GCC_MMSS_BIMC_GFX_CLK>; 1269 1270 clock-names = "core", 1271 "iface", 1272 "rbbmtimer", 1273 "mem", 1274 "mem_iface"; 1275 1276 interconnects = <&bimc MASTER_GRAPHICS_3D &bimc SLAVE_EBI_CH0>; 1277 interconnect-names = "gfx-mem"; 1278 1279 power-domains = <&mmcc GPU_GX_GDSC>; 1280 iommus = <&adreno_smmu 0>; 1281 1282 nvmem-cells = <&speedbin_efuse>; 1283 nvmem-cell-names = "speed_bin"; 1284 1285 operating-points-v2 = <&gpu_opp_table>; 1286 1287 status = "disabled"; 1288 1289 #cooling-cells = <2>; 1290 1291 gpu_opp_table: opp-table { 1292 compatible = "operating-points-v2"; 1293 1294 /* 1295 * 624Mhz is only available on speed bins 0 and 3. 1296 * 560Mhz is only available on speed bins 0, 2 and 3. 1297 * All the rest are available on all bins of the hardware. 1298 */ 1299 opp-624000000 { 1300 opp-hz = /bits/ 64 <624000000>; 1301 opp-supported-hw = <0x09>; 1302 }; 1303 opp-560000000 { 1304 opp-hz = /bits/ 64 <560000000>; 1305 opp-supported-hw = <0x0d>; 1306 }; 1307 opp-510000000 { 1308 opp-hz = /bits/ 64 <510000000>; 1309 opp-supported-hw = <0xff>; 1310 }; 1311 opp-401800000 { 1312 opp-hz = /bits/ 64 <401800000>; 1313 opp-supported-hw = <0xff>; 1314 }; 1315 opp-315000000 { 1316 opp-hz = /bits/ 64 <315000000>; 1317 opp-supported-hw = <0xff>; 1318 }; 1319 opp-214000000 { 1320 opp-hz = /bits/ 64 <214000000>; 1321 opp-supported-hw = <0xff>; 1322 }; 1323 opp-133000000 { 1324 opp-hz = /bits/ 64 <133000000>; 1325 opp-supported-hw = <0xff>; 1326 }; 1327 }; 1328 1329 zap-shader { 1330 memory-region = <&gpu_mem>; 1331 }; 1332 }; 1333 1334 tlmm: pinctrl@1010000 { 1335 compatible = "qcom,msm8996-pinctrl"; 1336 reg = <0x01010000 0x300000>; 1337 interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; 1338 gpio-controller; 1339 gpio-ranges = <&tlmm 0 0 150>; 1340 #gpio-cells = <2>; 1341 interrupt-controller; 1342 #interrupt-cells = <2>; 1343 1344 blsp1_spi1_default: blsp1-spi1-default-state { 1345 spi-pins { 1346 pins = "gpio0", "gpio1", "gpio3"; 1347 function = "blsp_spi1"; 1348 drive-strength = <12>; 1349 bias-disable; 1350 }; 1351 1352 cs-pins { 1353 pins = "gpio2"; 1354 function = "gpio"; 1355 drive-strength = <16>; 1356 bias-disable; 1357 output-high; 1358 }; 1359 }; 1360 1361 blsp1_spi1_sleep: blsp1-spi1-sleep-state { 1362 pins = "gpio0", "gpio1", "gpio2", "gpio3"; 1363 function = "gpio"; 1364 drive-strength = <2>; 1365 bias-pull-down; 1366 }; 1367 1368 blsp2_uart2_2pins_default: blsp2-uart2-2pins-state { 1369 pins = "gpio4", "gpio5"; 1370 function = "blsp_uart8"; 1371 drive-strength = <16>; 1372 bias-disable; 1373 }; 1374 1375 blsp2_uart2_2pins_sleep: blsp2-uart2-2pins-sleep-state { 1376 pins = "gpio4", "gpio5"; 1377 function = "gpio"; 1378 drive-strength = <2>; 1379 bias-disable; 1380 }; 1381 1382 blsp2_i2c2_default: blsp2-i2c2-state { 1383 pins = "gpio6", "gpio7"; 1384 function = "blsp_i2c8"; 1385 drive-strength = <16>; 1386 bias-disable; 1387 }; 1388 1389 blsp2_i2c2_sleep: blsp2-i2c2-sleep-state { 1390 pins = "gpio6", "gpio7"; 1391 function = "gpio"; 1392 drive-strength = <2>; 1393 bias-disable; 1394 }; 1395 1396 blsp1_i2c6_default: blsp1-i2c6-state { 1397 pins = "gpio27", "gpio28"; 1398 function = "blsp_i2c6"; 1399 drive-strength = <16>; 1400 bias-disable; 1401 }; 1402 1403 blsp1_i2c6_sleep: blsp1-i2c6-sleep-state { 1404 pins = "gpio27", "gpio28"; 1405 function = "gpio"; 1406 drive-strength = <2>; 1407 bias-pull-up; 1408 }; 1409 1410 cci0_default: cci0-default-state { 1411 pins = "gpio17", "gpio18"; 1412 function = "cci_i2c"; 1413 drive-strength = <16>; 1414 bias-disable; 1415 }; 1416 1417 camera0_state_on: 1418 camera_rear_default: camera-rear-default-state { 1419 camera0_mclk: mclk0-pins { 1420 pins = "gpio13"; 1421 function = "cam_mclk"; 1422 drive-strength = <16>; 1423 bias-disable; 1424 }; 1425 1426 camera0_rst: rst-pins { 1427 pins = "gpio25"; 1428 function = "gpio"; 1429 drive-strength = <16>; 1430 bias-disable; 1431 }; 1432 1433 camera0_pwdn: pwdn-pins { 1434 pins = "gpio26"; 1435 function = "gpio"; 1436 drive-strength = <16>; 1437 bias-disable; 1438 }; 1439 }; 1440 1441 cci1_default: cci1-default-state { 1442 pins = "gpio19", "gpio20"; 1443 function = "cci_i2c"; 1444 drive-strength = <16>; 1445 bias-disable; 1446 }; 1447 1448 camera1_state_on: 1449 camera_board_default: camera-board-default-state { 1450 mclk1-pins { 1451 pins = "gpio14"; 1452 function = "cam_mclk"; 1453 drive-strength = <16>; 1454 bias-disable; 1455 }; 1456 1457 pwdn-pins { 1458 pins = "gpio98"; 1459 function = "gpio"; 1460 drive-strength = <16>; 1461 bias-disable; 1462 }; 1463 1464 rst-pins { 1465 pins = "gpio104"; 1466 function = "gpio"; 1467 drive-strength = <16>; 1468 bias-disable; 1469 }; 1470 }; 1471 1472 camera2_state_on: 1473 camera_front_default: camera-front-default-state { 1474 camera2_mclk: mclk2-pins { 1475 pins = "gpio15"; 1476 function = "cam_mclk"; 1477 drive-strength = <16>; 1478 bias-disable; 1479 }; 1480 1481 camera2_rst: rst-pins { 1482 pins = "gpio23"; 1483 function = "gpio"; 1484 drive-strength = <16>; 1485 bias-disable; 1486 }; 1487 1488 pwdn-pins { 1489 pins = "gpio133"; 1490 function = "gpio"; 1491 drive-strength = <16>; 1492 bias-disable; 1493 }; 1494 }; 1495 1496 pcie0_state_on: pcie0-state-on-state { 1497 perst-pins { 1498 pins = "gpio35"; 1499 function = "gpio"; 1500 drive-strength = <2>; 1501 bias-pull-down; 1502 }; 1503 1504 clkreq-pins { 1505 pins = "gpio36"; 1506 function = "pci_e0"; 1507 drive-strength = <2>; 1508 bias-pull-up; 1509 }; 1510 1511 wake-pins { 1512 pins = "gpio37"; 1513 function = "gpio"; 1514 drive-strength = <2>; 1515 bias-pull-up; 1516 }; 1517 }; 1518 1519 pcie0_state_off: pcie0-state-off-state { 1520 perst-pins { 1521 pins = "gpio35"; 1522 function = "gpio"; 1523 drive-strength = <2>; 1524 bias-pull-down; 1525 }; 1526 1527 clkreq-pins { 1528 pins = "gpio36"; 1529 function = "gpio"; 1530 drive-strength = <2>; 1531 bias-disable; 1532 }; 1533 1534 wake-pins { 1535 pins = "gpio37"; 1536 function = "gpio"; 1537 drive-strength = <2>; 1538 bias-disable; 1539 }; 1540 }; 1541 1542 blsp1_uart2_default: blsp1-uart2-default-state { 1543 pins = "gpio41", "gpio42", "gpio43", "gpio44"; 1544 function = "blsp_uart2"; 1545 drive-strength = <16>; 1546 bias-disable; 1547 }; 1548 1549 blsp1_uart2_sleep: blsp1-uart2-sleep-state { 1550 pins = "gpio41", "gpio42", "gpio43", "gpio44"; 1551 function = "gpio"; 1552 drive-strength = <2>; 1553 bias-disable; 1554 }; 1555 1556 blsp1_i2c3_default: blsp1-i2c3-default-state { 1557 pins = "gpio47", "gpio48"; 1558 function = "blsp_i2c3"; 1559 drive-strength = <16>; 1560 bias-disable; 1561 }; 1562 1563 blsp1_i2c3_sleep: blsp1-i2c3-sleep-state { 1564 pins = "gpio47", "gpio48"; 1565 function = "gpio"; 1566 drive-strength = <2>; 1567 bias-disable; 1568 }; 1569 1570 blsp2_uart3_4pins_default: blsp2-uart3-4pins-state { 1571 pins = "gpio49", "gpio50", "gpio51", "gpio52"; 1572 function = "blsp_uart9"; 1573 drive-strength = <16>; 1574 bias-disable; 1575 }; 1576 1577 blsp2_uart3_4pins_sleep: blsp2-uart3-4pins-sleep-state { 1578 pins = "gpio49", "gpio50", "gpio51", "gpio52"; 1579 function = "blsp_uart9"; 1580 drive-strength = <2>; 1581 bias-disable; 1582 }; 1583 1584 blsp2_i2c3_default: blsp2-i2c3-state-state { 1585 pins = "gpio51", "gpio52"; 1586 function = "blsp_i2c9"; 1587 drive-strength = <16>; 1588 bias-disable; 1589 }; 1590 1591 blsp2_i2c3_sleep: blsp2-i2c3-sleep-state { 1592 pins = "gpio51", "gpio52"; 1593 function = "gpio"; 1594 drive-strength = <2>; 1595 bias-disable; 1596 }; 1597 1598 wcd_intr_default: wcd-intr-default-state { 1599 pins = "gpio54"; 1600 function = "gpio"; 1601 drive-strength = <2>; 1602 bias-pull-down; 1603 }; 1604 1605 blsp2_i2c1_default: blsp2-i2c1-state { 1606 pins = "gpio55", "gpio56"; 1607 function = "blsp_i2c7"; 1608 drive-strength = <16>; 1609 bias-disable; 1610 }; 1611 1612 blsp2_i2c1_sleep: blsp2-i2c1-sleep-state { 1613 pins = "gpio55", "gpio56"; 1614 function = "gpio"; 1615 drive-strength = <2>; 1616 bias-disable; 1617 }; 1618 1619 blsp2_i2c5_default: blsp2-i2c5-state { 1620 pins = "gpio60", "gpio61"; 1621 function = "blsp_i2c11"; 1622 drive-strength = <2>; 1623 bias-disable; 1624 }; 1625 1626 /* Sleep state for BLSP2_I2C5 is missing.. */ 1627 1628 cdc_reset_active: cdc-reset-active-state { 1629 pins = "gpio64"; 1630 function = "gpio"; 1631 drive-strength = <16>; 1632 bias-pull-down; 1633 output-high; 1634 }; 1635 1636 cdc_reset_sleep: cdc-reset-sleep-state { 1637 pins = "gpio64"; 1638 function = "gpio"; 1639 drive-strength = <16>; 1640 bias-disable; 1641 output-low; 1642 }; 1643 1644 blsp2_spi6_default: blsp2-spi6-default-state { 1645 spi-pins { 1646 pins = "gpio85", "gpio86", "gpio88"; 1647 function = "blsp_spi12"; 1648 drive-strength = <12>; 1649 bias-disable; 1650 }; 1651 1652 cs-pins { 1653 pins = "gpio87"; 1654 function = "gpio"; 1655 drive-strength = <16>; 1656 bias-disable; 1657 output-high; 1658 }; 1659 }; 1660 1661 blsp2_spi6_sleep: blsp2-spi6-sleep-state { 1662 pins = "gpio85", "gpio86", "gpio87", "gpio88"; 1663 function = "gpio"; 1664 drive-strength = <2>; 1665 bias-pull-down; 1666 }; 1667 1668 blsp2_i2c6_default: blsp2-i2c6-state { 1669 pins = "gpio87", "gpio88"; 1670 function = "blsp_i2c12"; 1671 drive-strength = <16>; 1672 bias-disable; 1673 }; 1674 1675 blsp2_i2c6_sleep: blsp2-i2c6-sleep-state { 1676 pins = "gpio87", "gpio88"; 1677 function = "gpio"; 1678 drive-strength = <2>; 1679 bias-disable; 1680 }; 1681 1682 pcie1_state_on: pcie1-on-state { 1683 perst-pins { 1684 pins = "gpio130"; 1685 function = "gpio"; 1686 drive-strength = <2>; 1687 bias-pull-down; 1688 }; 1689 1690 clkreq-pins { 1691 pins = "gpio131"; 1692 function = "pci_e1"; 1693 drive-strength = <2>; 1694 bias-pull-up; 1695 }; 1696 1697 wake-pins { 1698 pins = "gpio132"; 1699 function = "gpio"; 1700 drive-strength = <2>; 1701 bias-pull-down; 1702 }; 1703 }; 1704 1705 pcie1_state_off: pcie1-off-state { 1706 /* Perst is missing? */ 1707 clkreq-pins { 1708 pins = "gpio131"; 1709 function = "gpio"; 1710 drive-strength = <2>; 1711 bias-disable; 1712 }; 1713 1714 wake-pins { 1715 pins = "gpio132"; 1716 function = "gpio"; 1717 drive-strength = <2>; 1718 bias-disable; 1719 }; 1720 }; 1721 1722 pcie2_state_on: pcie2-on-state { 1723 perst-pins { 1724 pins = "gpio114"; 1725 function = "gpio"; 1726 drive-strength = <2>; 1727 bias-pull-down; 1728 }; 1729 1730 clkreq-pins { 1731 pins = "gpio115"; 1732 function = "pci_e2"; 1733 drive-strength = <2>; 1734 bias-pull-up; 1735 }; 1736 1737 wake-pins { 1738 pins = "gpio116"; 1739 function = "gpio"; 1740 drive-strength = <2>; 1741 bias-pull-down; 1742 }; 1743 }; 1744 1745 pcie2_state_off: pcie2-off-state { 1746 /* Perst is missing? */ 1747 clkreq-pins { 1748 pins = "gpio115"; 1749 function = "gpio"; 1750 drive-strength = <2>; 1751 bias-disable; 1752 }; 1753 1754 wake-pins { 1755 pins = "gpio116"; 1756 function = "gpio"; 1757 drive-strength = <2>; 1758 bias-disable; 1759 }; 1760 }; 1761 1762 sdc1_state_on: sdc1-on-state { 1763 clk-pins { 1764 pins = "sdc1_clk"; 1765 bias-disable; 1766 drive-strength = <16>; 1767 }; 1768 1769 cmd-pins { 1770 pins = "sdc1_cmd"; 1771 bias-pull-up; 1772 drive-strength = <10>; 1773 }; 1774 1775 data-pins { 1776 pins = "sdc1_data"; 1777 bias-pull-up; 1778 drive-strength = <10>; 1779 }; 1780 1781 rclk-pins { 1782 pins = "sdc1_rclk"; 1783 bias-pull-down; 1784 }; 1785 }; 1786 1787 sdc1_state_off: sdc1-off-state { 1788 clk-pins { 1789 pins = "sdc1_clk"; 1790 bias-disable; 1791 drive-strength = <2>; 1792 }; 1793 1794 cmd-pins { 1795 pins = "sdc1_cmd"; 1796 bias-pull-up; 1797 drive-strength = <2>; 1798 }; 1799 1800 data-pins { 1801 pins = "sdc1_data"; 1802 bias-pull-up; 1803 drive-strength = <2>; 1804 }; 1805 1806 rclk-pins { 1807 pins = "sdc1_rclk"; 1808 bias-pull-down; 1809 }; 1810 }; 1811 1812 sdc2_state_on: sdc2-on-state { 1813 clk-pins { 1814 pins = "sdc2_clk"; 1815 bias-disable; 1816 drive-strength = <16>; 1817 }; 1818 1819 cmd-pins { 1820 pins = "sdc2_cmd"; 1821 bias-pull-up; 1822 drive-strength = <10>; 1823 }; 1824 1825 data-pins { 1826 pins = "sdc2_data"; 1827 bias-pull-up; 1828 drive-strength = <10>; 1829 }; 1830 }; 1831 1832 sdc2_state_off: sdc2-off-state { 1833 clk-pins { 1834 pins = "sdc2_clk"; 1835 bias-disable; 1836 drive-strength = <2>; 1837 }; 1838 1839 cmd-pins { 1840 pins = "sdc2_cmd"; 1841 bias-pull-up; 1842 drive-strength = <2>; 1843 }; 1844 1845 data-pins { 1846 pins = "sdc2_data"; 1847 bias-pull-up; 1848 drive-strength = <2>; 1849 }; 1850 }; 1851 }; 1852 1853 sram@290000 { 1854 compatible = "qcom,rpm-stats"; 1855 reg = <0x00290000 0x10000>; 1856 }; 1857 1858 spmi_bus: spmi@400f000 { 1859 compatible = "qcom,spmi-pmic-arb"; 1860 reg = <0x0400f000 0x1000>, 1861 <0x04400000 0x800000>, 1862 <0x04c00000 0x800000>, 1863 <0x05800000 0x200000>, 1864 <0x0400a000 0x002100>; 1865 reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; 1866 interrupt-names = "periph_irq"; 1867 interrupts = <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>; 1868 qcom,ee = <0>; 1869 qcom,channel = <0>; 1870 #address-cells = <2>; 1871 #size-cells = <0>; 1872 interrupt-controller; 1873 #interrupt-cells = <4>; 1874 }; 1875 1876 bus@0 { 1877 power-domains = <&gcc AGGRE0_NOC_GDSC>; 1878 compatible = "simple-pm-bus"; 1879 #address-cells = <1>; 1880 #size-cells = <1>; 1881 ranges = <0x0 0x0 0xffffffff>; 1882 1883 pcie0: pcie@600000 { 1884 compatible = "qcom,pcie-msm8996"; 1885 status = "disabled"; 1886 power-domains = <&gcc PCIE0_GDSC>; 1887 bus-range = <0x00 0xff>; 1888 num-lanes = <1>; 1889 1890 reg = <0x00600000 0x2000>, 1891 <0x0c000000 0xf1d>, 1892 <0x0c000f20 0xa8>, 1893 <0x0c100000 0x100000>; 1894 reg-names = "parf", "dbi", "elbi","config"; 1895 1896 phys = <&pciephy_0>; 1897 phy-names = "pciephy"; 1898 1899 #address-cells = <3>; 1900 #size-cells = <2>; 1901 ranges = <0x01000000 0x0 0x00000000 0x0c200000 0x0 0x100000>, 1902 <0x02000000 0x0 0x0c300000 0x0c300000 0x0 0xd00000>; 1903 1904 device_type = "pci"; 1905 1906 interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>; 1907 interrupt-names = "msi"; 1908 #interrupt-cells = <1>; 1909 interrupt-map-mask = <0 0 0 0x7>; 1910 interrupt-map = <0 0 0 1 &intc 0 244 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ 1911 <0 0 0 2 &intc 0 245 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ 1912 <0 0 0 3 &intc 0 247 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ 1913 <0 0 0 4 &intc 0 248 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ 1914 1915 pinctrl-names = "default", "sleep"; 1916 pinctrl-0 = <&pcie0_state_on>; 1917 pinctrl-1 = <&pcie0_state_off>; 1918 1919 linux,pci-domain = <0>; 1920 1921 clocks = <&gcc GCC_PCIE_0_PIPE_CLK>, 1922 <&gcc GCC_PCIE_0_AUX_CLK>, 1923 <&gcc GCC_PCIE_0_CFG_AHB_CLK>, 1924 <&gcc GCC_PCIE_0_MSTR_AXI_CLK>, 1925 <&gcc GCC_PCIE_0_SLV_AXI_CLK>; 1926 1927 clock-names = "pipe", 1928 "aux", 1929 "cfg", 1930 "bus_master", 1931 "bus_slave"; 1932 }; 1933 1934 pcie1: pcie@608000 { 1935 compatible = "qcom,pcie-msm8996"; 1936 power-domains = <&gcc PCIE1_GDSC>; 1937 bus-range = <0x00 0xff>; 1938 num-lanes = <1>; 1939 1940 status = "disabled"; 1941 1942 reg = <0x00608000 0x2000>, 1943 <0x0d000000 0xf1d>, 1944 <0x0d000f20 0xa8>, 1945 <0x0d100000 0x100000>; 1946 1947 reg-names = "parf", "dbi", "elbi","config"; 1948 1949 phys = <&pciephy_1>; 1950 phy-names = "pciephy"; 1951 1952 #address-cells = <3>; 1953 #size-cells = <2>; 1954 ranges = <0x01000000 0x0 0x00000000 0x0d200000 0x0 0x100000>, 1955 <0x02000000 0x0 0x0d300000 0x0d300000 0x0 0xd00000>; 1956 1957 device_type = "pci"; 1958 1959 interrupts = <GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>; 1960 interrupt-names = "msi"; 1961 #interrupt-cells = <1>; 1962 interrupt-map-mask = <0 0 0 0x7>; 1963 interrupt-map = <0 0 0 1 &intc 0 272 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ 1964 <0 0 0 2 &intc 0 273 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ 1965 <0 0 0 3 &intc 0 274 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ 1966 <0 0 0 4 &intc 0 275 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ 1967 1968 pinctrl-names = "default", "sleep"; 1969 pinctrl-0 = <&pcie1_state_on>; 1970 pinctrl-1 = <&pcie1_state_off>; 1971 1972 linux,pci-domain = <1>; 1973 1974 clocks = <&gcc GCC_PCIE_1_PIPE_CLK>, 1975 <&gcc GCC_PCIE_1_AUX_CLK>, 1976 <&gcc GCC_PCIE_1_CFG_AHB_CLK>, 1977 <&gcc GCC_PCIE_1_MSTR_AXI_CLK>, 1978 <&gcc GCC_PCIE_1_SLV_AXI_CLK>; 1979 1980 clock-names = "pipe", 1981 "aux", 1982 "cfg", 1983 "bus_master", 1984 "bus_slave"; 1985 }; 1986 1987 pcie2: pcie@610000 { 1988 compatible = "qcom,pcie-msm8996"; 1989 power-domains = <&gcc PCIE2_GDSC>; 1990 bus-range = <0x00 0xff>; 1991 num-lanes = <1>; 1992 status = "disabled"; 1993 reg = <0x00610000 0x2000>, 1994 <0x0e000000 0xf1d>, 1995 <0x0e000f20 0xa8>, 1996 <0x0e100000 0x100000>; 1997 1998 reg-names = "parf", "dbi", "elbi","config"; 1999 2000 phys = <&pciephy_2>; 2001 phy-names = "pciephy"; 2002 2003 #address-cells = <3>; 2004 #size-cells = <2>; 2005 ranges = <0x01000000 0x0 0x00000000 0x0e200000 0x0 0x100000>, 2006 <0x02000000 0x0 0x0e300000 0x0e300000 0x0 0x1d00000>; 2007 2008 device_type = "pci"; 2009 2010 interrupts = <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>; 2011 interrupt-names = "msi"; 2012 #interrupt-cells = <1>; 2013 interrupt-map-mask = <0 0 0 0x7>; 2014 interrupt-map = <0 0 0 1 &intc 0 142 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ 2015 <0 0 0 2 &intc 0 143 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ 2016 <0 0 0 3 &intc 0 144 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ 2017 <0 0 0 4 &intc 0 145 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ 2018 2019 pinctrl-names = "default", "sleep"; 2020 pinctrl-0 = <&pcie2_state_on>; 2021 pinctrl-1 = <&pcie2_state_off>; 2022 2023 linux,pci-domain = <2>; 2024 clocks = <&gcc GCC_PCIE_2_PIPE_CLK>, 2025 <&gcc GCC_PCIE_2_AUX_CLK>, 2026 <&gcc GCC_PCIE_2_CFG_AHB_CLK>, 2027 <&gcc GCC_PCIE_2_MSTR_AXI_CLK>, 2028 <&gcc GCC_PCIE_2_SLV_AXI_CLK>; 2029 2030 clock-names = "pipe", 2031 "aux", 2032 "cfg", 2033 "bus_master", 2034 "bus_slave"; 2035 }; 2036 }; 2037 2038 ufshc: ufshc@624000 { 2039 compatible = "qcom,msm8996-ufshc", "qcom,ufshc", 2040 "jedec,ufs-2.0"; 2041 reg = <0x00624000 0x2500>; 2042 interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; 2043 2044 phys = <&ufsphy>; 2045 phy-names = "ufsphy"; 2046 2047 power-domains = <&gcc UFS_GDSC>; 2048 2049 clock-names = 2050 "core_clk_src", 2051 "core_clk", 2052 "bus_clk", 2053 "bus_aggr_clk", 2054 "iface_clk", 2055 "core_clk_unipro_src", 2056 "core_clk_unipro", 2057 "core_clk_ice", 2058 "ref_clk", 2059 "tx_lane0_sync_clk", 2060 "rx_lane0_sync_clk"; 2061 clocks = 2062 <&gcc UFS_AXI_CLK_SRC>, 2063 <&gcc GCC_UFS_AXI_CLK>, 2064 <&gcc GCC_SYS_NOC_UFS_AXI_CLK>, 2065 <&gcc GCC_AGGRE2_UFS_AXI_CLK>, 2066 <&gcc GCC_UFS_AHB_CLK>, 2067 <&gcc UFS_ICE_CORE_CLK_SRC>, 2068 <&gcc GCC_UFS_UNIPRO_CORE_CLK>, 2069 <&gcc GCC_UFS_ICE_CORE_CLK>, 2070 <&rpmcc RPM_SMD_LN_BB_CLK>, 2071 <&gcc GCC_UFS_TX_SYMBOL_0_CLK>, 2072 <&gcc GCC_UFS_RX_SYMBOL_0_CLK>; 2073 freq-table-hz = 2074 <100000000 200000000>, 2075 <0 0>, 2076 <0 0>, 2077 <0 0>, 2078 <0 0>, 2079 <150000000 300000000>, 2080 <75000000 150000000>, 2081 <0 0>, 2082 <0 0>, 2083 <0 0>, 2084 <0 0>; 2085 2086 interconnects = <&a2noc MASTER_UFS &bimc SLAVE_EBI_CH0>, 2087 <&bimc MASTER_AMPSS_M0 &cnoc SLAVE_UFS_CFG>; 2088 interconnect-names = "ufs-ddr", "cpu-ufs"; 2089 2090 lanes-per-direction = <1>; 2091 #reset-cells = <1>; 2092 status = "disabled"; 2093 }; 2094 2095 ufsphy: phy@627000 { 2096 compatible = "qcom,msm8996-qmp-ufs-phy"; 2097 reg = <0x00627000 0x1000>; 2098 2099 clocks = <&rpmcc RPM_SMD_LN_BB_CLK>, <&gcc GCC_UFS_CLKREF_CLK>; 2100 clock-names = "ref", "qref"; 2101 2102 resets = <&ufshc 0>; 2103 reset-names = "ufsphy"; 2104 2105 #clock-cells = <1>; 2106 #phy-cells = <0>; 2107 2108 status = "disabled"; 2109 }; 2110 2111 camss: camss@a34000 { 2112 compatible = "qcom,msm8996-camss"; 2113 reg = <0x00a34000 0x1000>, 2114 <0x00a00030 0x4>, 2115 <0x00a35000 0x1000>, 2116 <0x00a00038 0x4>, 2117 <0x00a36000 0x1000>, 2118 <0x00a00040 0x4>, 2119 <0x00a30000 0x100>, 2120 <0x00a30400 0x100>, 2121 <0x00a30800 0x100>, 2122 <0x00a30c00 0x100>, 2123 <0x00a31000 0x500>, 2124 <0x00a00020 0x10>, 2125 <0x00a10000 0x1000>, 2126 <0x00a14000 0x1000>; 2127 reg-names = "csiphy0", 2128 "csiphy0_clk_mux", 2129 "csiphy1", 2130 "csiphy1_clk_mux", 2131 "csiphy2", 2132 "csiphy2_clk_mux", 2133 "csid0", 2134 "csid1", 2135 "csid2", 2136 "csid3", 2137 "ispif", 2138 "csi_clk_mux", 2139 "vfe0", 2140 "vfe1"; 2141 interrupts = <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>, 2142 <GIC_SPI 79 IRQ_TYPE_EDGE_RISING>, 2143 <GIC_SPI 80 IRQ_TYPE_EDGE_RISING>, 2144 <GIC_SPI 296 IRQ_TYPE_EDGE_RISING>, 2145 <GIC_SPI 297 IRQ_TYPE_EDGE_RISING>, 2146 <GIC_SPI 298 IRQ_TYPE_EDGE_RISING>, 2147 <GIC_SPI 299 IRQ_TYPE_EDGE_RISING>, 2148 <GIC_SPI 309 IRQ_TYPE_EDGE_RISING>, 2149 <GIC_SPI 314 IRQ_TYPE_EDGE_RISING>, 2150 <GIC_SPI 315 IRQ_TYPE_EDGE_RISING>; 2151 interrupt-names = "csiphy0", 2152 "csiphy1", 2153 "csiphy2", 2154 "csid0", 2155 "csid1", 2156 "csid2", 2157 "csid3", 2158 "ispif", 2159 "vfe0", 2160 "vfe1"; 2161 power-domains = <&mmcc VFE0_GDSC>, 2162 <&mmcc VFE1_GDSC>; 2163 clocks = <&mmcc CAMSS_TOP_AHB_CLK>, 2164 <&mmcc CAMSS_ISPIF_AHB_CLK>, 2165 <&mmcc CAMSS_CSI0PHYTIMER_CLK>, 2166 <&mmcc CAMSS_CSI1PHYTIMER_CLK>, 2167 <&mmcc CAMSS_CSI2PHYTIMER_CLK>, 2168 <&mmcc CAMSS_CSI0_AHB_CLK>, 2169 <&mmcc CAMSS_CSI0_CLK>, 2170 <&mmcc CAMSS_CSI0PHY_CLK>, 2171 <&mmcc CAMSS_CSI0PIX_CLK>, 2172 <&mmcc CAMSS_CSI0RDI_CLK>, 2173 <&mmcc CAMSS_CSI1_AHB_CLK>, 2174 <&mmcc CAMSS_CSI1_CLK>, 2175 <&mmcc CAMSS_CSI1PHY_CLK>, 2176 <&mmcc CAMSS_CSI1PIX_CLK>, 2177 <&mmcc CAMSS_CSI1RDI_CLK>, 2178 <&mmcc CAMSS_CSI2_AHB_CLK>, 2179 <&mmcc CAMSS_CSI2_CLK>, 2180 <&mmcc CAMSS_CSI2PHY_CLK>, 2181 <&mmcc CAMSS_CSI2PIX_CLK>, 2182 <&mmcc CAMSS_CSI2RDI_CLK>, 2183 <&mmcc CAMSS_CSI3_AHB_CLK>, 2184 <&mmcc CAMSS_CSI3_CLK>, 2185 <&mmcc CAMSS_CSI3PHY_CLK>, 2186 <&mmcc CAMSS_CSI3PIX_CLK>, 2187 <&mmcc CAMSS_CSI3RDI_CLK>, 2188 <&mmcc CAMSS_AHB_CLK>, 2189 <&mmcc CAMSS_VFE0_CLK>, 2190 <&mmcc CAMSS_CSI_VFE0_CLK>, 2191 <&mmcc CAMSS_VFE0_AHB_CLK>, 2192 <&mmcc CAMSS_VFE0_STREAM_CLK>, 2193 <&mmcc CAMSS_VFE1_CLK>, 2194 <&mmcc CAMSS_CSI_VFE1_CLK>, 2195 <&mmcc CAMSS_VFE1_AHB_CLK>, 2196 <&mmcc CAMSS_VFE1_STREAM_CLK>, 2197 <&mmcc CAMSS_VFE_AHB_CLK>, 2198 <&mmcc CAMSS_VFE_AXI_CLK>; 2199 clock-names = "top_ahb", 2200 "ispif_ahb", 2201 "csiphy0_timer", 2202 "csiphy1_timer", 2203 "csiphy2_timer", 2204 "csi0_ahb", 2205 "csi0", 2206 "csi0_phy", 2207 "csi0_pix", 2208 "csi0_rdi", 2209 "csi1_ahb", 2210 "csi1", 2211 "csi1_phy", 2212 "csi1_pix", 2213 "csi1_rdi", 2214 "csi2_ahb", 2215 "csi2", 2216 "csi2_phy", 2217 "csi2_pix", 2218 "csi2_rdi", 2219 "csi3_ahb", 2220 "csi3", 2221 "csi3_phy", 2222 "csi3_pix", 2223 "csi3_rdi", 2224 "ahb", 2225 "vfe0", 2226 "csi_vfe0", 2227 "vfe0_ahb", 2228 "vfe0_stream", 2229 "vfe1", 2230 "csi_vfe1", 2231 "vfe1_ahb", 2232 "vfe1_stream", 2233 "vfe_ahb", 2234 "vfe_axi"; 2235 iommus = <&vfe_smmu 0>, 2236 <&vfe_smmu 1>, 2237 <&vfe_smmu 2>, 2238 <&vfe_smmu 3>; 2239 status = "disabled"; 2240 ports { 2241 #address-cells = <1>; 2242 #size-cells = <0>; 2243 }; 2244 }; 2245 2246 cci: cci@a0c000 { 2247 compatible = "qcom,msm8996-cci"; 2248 #address-cells = <1>; 2249 #size-cells = <0>; 2250 reg = <0xa0c000 0x1000>; 2251 interrupts = <GIC_SPI 295 IRQ_TYPE_EDGE_RISING>; 2252 power-domains = <&mmcc CAMSS_GDSC>; 2253 clocks = <&mmcc CAMSS_TOP_AHB_CLK>, 2254 <&mmcc CAMSS_CCI_AHB_CLK>, 2255 <&mmcc CAMSS_CCI_CLK>, 2256 <&mmcc CAMSS_AHB_CLK>; 2257 clock-names = "camss_top_ahb", 2258 "cci_ahb", 2259 "cci", 2260 "camss_ahb"; 2261 assigned-clocks = <&mmcc CAMSS_CCI_AHB_CLK>, 2262 <&mmcc CAMSS_CCI_CLK>; 2263 assigned-clock-rates = <80000000>, <37500000>; 2264 pinctrl-names = "default"; 2265 pinctrl-0 = <&cci0_default &cci1_default>; 2266 status = "disabled"; 2267 2268 cci_i2c0: i2c-bus@0 { 2269 reg = <0>; 2270 clock-frequency = <400000>; 2271 #address-cells = <1>; 2272 #size-cells = <0>; 2273 }; 2274 2275 cci_i2c1: i2c-bus@1 { 2276 reg = <1>; 2277 clock-frequency = <400000>; 2278 #address-cells = <1>; 2279 #size-cells = <0>; 2280 }; 2281 }; 2282 2283 adreno_smmu: iommu@b40000 { 2284 compatible = "qcom,msm8996-smmu-v2", "qcom,adreno-smmu", "qcom,smmu-v2"; 2285 reg = <0x00b40000 0x10000>; 2286 2287 #global-interrupts = <1>; 2288 interrupts = <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>, 2289 <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>, 2290 <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>; 2291 #iommu-cells = <1>; 2292 2293 clocks = <&gcc GCC_MMSS_BIMC_GFX_CLK>, 2294 <&mmcc GPU_AHB_CLK>; 2295 clock-names = "bus", "iface"; 2296 2297 power-domains = <&mmcc GPU_GDSC>; 2298 }; 2299 2300 venus: video-codec@c00000 { 2301 compatible = "qcom,msm8996-venus"; 2302 reg = <0x00c00000 0xff000>; 2303 interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>; 2304 power-domains = <&mmcc VENUS_GDSC>; 2305 clocks = <&mmcc VIDEO_CORE_CLK>, 2306 <&mmcc VIDEO_AHB_CLK>, 2307 <&mmcc VIDEO_AXI_CLK>, 2308 <&mmcc VIDEO_MAXI_CLK>; 2309 clock-names = "core", "iface", "bus", "mbus"; 2310 interconnects = <&mnoc MASTER_VIDEO_P0 &bimc SLAVE_EBI_CH0>, 2311 <&bimc MASTER_AMPSS_M0 &mnoc SLAVE_VENUS_CFG>; 2312 interconnect-names = "video-mem", "cpu-cfg"; 2313 iommus = <&venus_smmu 0x00>, 2314 <&venus_smmu 0x01>, 2315 <&venus_smmu 0x0a>, 2316 <&venus_smmu 0x07>, 2317 <&venus_smmu 0x0e>, 2318 <&venus_smmu 0x0f>, 2319 <&venus_smmu 0x08>, 2320 <&venus_smmu 0x09>, 2321 <&venus_smmu 0x0b>, 2322 <&venus_smmu 0x0c>, 2323 <&venus_smmu 0x0d>, 2324 <&venus_smmu 0x10>, 2325 <&venus_smmu 0x11>, 2326 <&venus_smmu 0x21>, 2327 <&venus_smmu 0x28>, 2328 <&venus_smmu 0x29>, 2329 <&venus_smmu 0x2b>, 2330 <&venus_smmu 0x2c>, 2331 <&venus_smmu 0x2d>, 2332 <&venus_smmu 0x31>; 2333 memory-region = <&venus_mem>; 2334 status = "disabled"; 2335 2336 video-decoder { 2337 compatible = "venus-decoder"; 2338 clocks = <&mmcc VIDEO_SUBCORE0_CLK>; 2339 clock-names = "core"; 2340 power-domains = <&mmcc VENUS_CORE0_GDSC>; 2341 }; 2342 2343 video-encoder { 2344 compatible = "venus-encoder"; 2345 clocks = <&mmcc VIDEO_SUBCORE1_CLK>; 2346 clock-names = "core"; 2347 power-domains = <&mmcc VENUS_CORE1_GDSC>; 2348 }; 2349 }; 2350 2351 mdp_smmu: iommu@d00000 { 2352 compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2"; 2353 reg = <0x00d00000 0x10000>; 2354 2355 #global-interrupts = <1>; 2356 interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>, 2357 <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>, 2358 <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>; 2359 #iommu-cells = <1>; 2360 clocks = <&mmcc SMMU_MDP_AXI_CLK>, 2361 <&mmcc SMMU_MDP_AHB_CLK>; 2362 clock-names = "bus", "iface"; 2363 2364 power-domains = <&mmcc MDSS_GDSC>; 2365 }; 2366 2367 venus_smmu: iommu@d40000 { 2368 compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2"; 2369 reg = <0x00d40000 0x20000>; 2370 #global-interrupts = <1>; 2371 interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>, 2372 <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>, 2373 <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>, 2374 <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>, 2375 <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>, 2376 <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>, 2377 <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>, 2378 <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>; 2379 power-domains = <&mmcc MMAGIC_VIDEO_GDSC>; 2380 clocks = <&mmcc SMMU_VIDEO_AXI_CLK>, 2381 <&mmcc SMMU_VIDEO_AHB_CLK>; 2382 clock-names = "bus", "iface"; 2383 #iommu-cells = <1>; 2384 status = "okay"; 2385 }; 2386 2387 vfe_smmu: iommu@da0000 { 2388 compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2"; 2389 reg = <0x00da0000 0x10000>; 2390 2391 #global-interrupts = <1>; 2392 interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>, 2393 <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>, 2394 <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>; 2395 power-domains = <&mmcc MMAGIC_CAMSS_GDSC>; 2396 clocks = <&mmcc SMMU_VFE_AXI_CLK>, 2397 <&mmcc SMMU_VFE_AHB_CLK>; 2398 clock-names = "bus", "iface"; 2399 #iommu-cells = <1>; 2400 }; 2401 2402 lpass_q6_smmu: iommu@1600000 { 2403 compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2"; 2404 reg = <0x01600000 0x20000>; 2405 #iommu-cells = <1>; 2406 power-domains = <&gcc HLOS1_VOTE_LPASS_CORE_GDSC>; 2407 2408 #global-interrupts = <1>; 2409 interrupts = <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>, 2410 <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>, 2411 <GIC_SPI 393 IRQ_TYPE_LEVEL_HIGH>, 2412 <GIC_SPI 394 IRQ_TYPE_LEVEL_HIGH>, 2413 <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>, 2414 <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>, 2415 <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>, 2416 <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>, 2417 <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>, 2418 <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>, 2419 <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>, 2420 <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>, 2421 <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>; 2422 2423 clocks = <&gcc GCC_HLOS1_VOTE_LPASS_ADSP_SMMU_CLK>, 2424 <&gcc GCC_HLOS1_VOTE_LPASS_CORE_SMMU_CLK>; 2425 clock-names = "bus", "iface"; 2426 }; 2427 2428 slpi_pil: remoteproc@1c00000 { 2429 compatible = "qcom,msm8996-slpi-pil"; 2430 reg = <0x01c00000 0x4000>; 2431 2432 interrupts-extended = <&intc 0 390 IRQ_TYPE_EDGE_RISING>, 2433 <&slpi_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, 2434 <&slpi_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, 2435 <&slpi_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, 2436 <&slpi_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; 2437 interrupt-names = "wdog", 2438 "fatal", 2439 "ready", 2440 "handover", 2441 "stop-ack"; 2442 2443 clocks = <&xo_board>; 2444 clock-names = "xo"; 2445 2446 memory-region = <&slpi_mem>; 2447 2448 qcom,smem-states = <&slpi_smp2p_out 0>; 2449 qcom,smem-state-names = "stop"; 2450 2451 power-domains = <&rpmpd MSM8996_VDDSSCX>; 2452 power-domain-names = "ssc_cx"; 2453 2454 status = "disabled"; 2455 2456 smd-edge { 2457 interrupts = <GIC_SPI 176 IRQ_TYPE_EDGE_RISING>; 2458 2459 label = "dsps"; 2460 mboxes = <&apcs_glb 25>; 2461 qcom,smd-edge = <3>; 2462 qcom,remote-pid = <3>; 2463 }; 2464 }; 2465 2466 mss_pil: remoteproc@2080000 { 2467 compatible = "qcom,msm8996-mss-pil"; 2468 reg = <0x2080000 0x100>, 2469 <0x2180000 0x020>; 2470 reg-names = "qdsp6", "rmb"; 2471 2472 interrupts-extended = <&intc 0 448 IRQ_TYPE_EDGE_RISING>, 2473 <&mpss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, 2474 <&mpss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, 2475 <&mpss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, 2476 <&mpss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>, 2477 <&mpss_smp2p_in 7 IRQ_TYPE_EDGE_RISING>; 2478 interrupt-names = "wdog", "fatal", "ready", 2479 "handover", "stop-ack", 2480 "shutdown-ack"; 2481 2482 clocks = <&gcc GCC_MSS_CFG_AHB_CLK>, 2483 <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>, 2484 <&gcc GCC_BOOT_ROM_AHB_CLK>, 2485 <&xo_board>, 2486 <&gcc GCC_MSS_GPLL0_DIV_CLK>, 2487 <&gcc GCC_MSS_SNOC_AXI_CLK>, 2488 <&gcc GCC_MSS_MNOC_BIMC_AXI_CLK>, 2489 <&rpmcc RPM_SMD_QDSS_CLK>; 2490 clock-names = "iface", 2491 "bus", 2492 "mem", 2493 "xo", 2494 "gpll0_mss", 2495 "snoc_axi", 2496 "mnoc_axi", 2497 "qdss"; 2498 2499 resets = <&gcc GCC_MSS_RESTART>; 2500 reset-names = "mss_restart"; 2501 2502 power-domains = <&rpmpd MSM8996_VDDCX>, 2503 <&rpmpd MSM8996_VDDMX>; 2504 power-domain-names = "cx", "mx"; 2505 2506 qcom,smem-states = <&mpss_smp2p_out 0>; 2507 qcom,smem-state-names = "stop"; 2508 2509 qcom,halt-regs = <&tcsr_1 0x3000 0x5000 0x4000>; 2510 2511 status = "disabled"; 2512 2513 mba { 2514 memory-region = <&mba_mem>; 2515 }; 2516 2517 mpss { 2518 memory-region = <&mpss_mem>; 2519 }; 2520 2521 metadata { 2522 memory-region = <&mdata_mem>; 2523 }; 2524 2525 smd-edge { 2526 interrupts = <GIC_SPI 449 IRQ_TYPE_EDGE_RISING>; 2527 2528 label = "mpss"; 2529 mboxes = <&apcs_glb 12>; 2530 qcom,smd-edge = <0>; 2531 qcom,remote-pid = <1>; 2532 }; 2533 }; 2534 2535 stm@3002000 { 2536 compatible = "arm,coresight-stm", "arm,primecell"; 2537 reg = <0x3002000 0x1000>, 2538 <0x8280000 0x180000>; 2539 reg-names = "stm-base", "stm-stimulus-base"; 2540 2541 clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; 2542 clock-names = "apb_pclk", "atclk"; 2543 2544 out-ports { 2545 port { 2546 stm_out: endpoint { 2547 remote-endpoint = 2548 <&funnel0_in>; 2549 }; 2550 }; 2551 }; 2552 }; 2553 2554 tpiu@3020000 { 2555 compatible = "arm,coresight-tpiu", "arm,primecell"; 2556 reg = <0x3020000 0x1000>; 2557 2558 clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; 2559 clock-names = "apb_pclk", "atclk"; 2560 2561 in-ports { 2562 port { 2563 tpiu_in: endpoint { 2564 remote-endpoint = 2565 <&replicator_out1>; 2566 }; 2567 }; 2568 }; 2569 }; 2570 2571 funnel@3021000 { 2572 compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; 2573 reg = <0x3021000 0x1000>; 2574 2575 clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; 2576 clock-names = "apb_pclk", "atclk"; 2577 2578 in-ports { 2579 #address-cells = <1>; 2580 #size-cells = <0>; 2581 2582 port@7 { 2583 reg = <7>; 2584 funnel0_in: endpoint { 2585 remote-endpoint = 2586 <&stm_out>; 2587 }; 2588 }; 2589 }; 2590 2591 out-ports { 2592 port { 2593 funnel0_out: endpoint { 2594 remote-endpoint = 2595 <&merge_funnel_in0>; 2596 }; 2597 }; 2598 }; 2599 }; 2600 2601 funnel@3022000 { 2602 compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; 2603 reg = <0x3022000 0x1000>; 2604 2605 clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; 2606 clock-names = "apb_pclk", "atclk"; 2607 2608 in-ports { 2609 #address-cells = <1>; 2610 #size-cells = <0>; 2611 2612 port@6 { 2613 reg = <6>; 2614 funnel1_in: endpoint { 2615 remote-endpoint = 2616 <&apss_merge_funnel_out>; 2617 }; 2618 }; 2619 }; 2620 2621 out-ports { 2622 port { 2623 funnel1_out: endpoint { 2624 remote-endpoint = 2625 <&merge_funnel_in1>; 2626 }; 2627 }; 2628 }; 2629 }; 2630 2631 funnel@3023000 { 2632 compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; 2633 reg = <0x3023000 0x1000>; 2634 2635 clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; 2636 clock-names = "apb_pclk", "atclk"; 2637 2638 in-ports { 2639 port { 2640 funnel_in2_in_modem_etm: endpoint { 2641 remote-endpoint = 2642 <&modem_etm_out_funnel_in2>; 2643 }; 2644 }; 2645 }; 2646 2647 out-ports { 2648 port { 2649 funnel2_out: endpoint { 2650 remote-endpoint = 2651 <&merge_funnel_in2>; 2652 }; 2653 }; 2654 }; 2655 }; 2656 2657 funnel@3025000 { 2658 compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; 2659 reg = <0x3025000 0x1000>; 2660 2661 clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; 2662 clock-names = "apb_pclk", "atclk"; 2663 2664 in-ports { 2665 #address-cells = <1>; 2666 #size-cells = <0>; 2667 2668 port@0 { 2669 reg = <0>; 2670 merge_funnel_in0: endpoint { 2671 remote-endpoint = 2672 <&funnel0_out>; 2673 }; 2674 }; 2675 2676 port@1 { 2677 reg = <1>; 2678 merge_funnel_in1: endpoint { 2679 remote-endpoint = 2680 <&funnel1_out>; 2681 }; 2682 }; 2683 2684 port@2 { 2685 reg = <2>; 2686 merge_funnel_in2: endpoint { 2687 remote-endpoint = 2688 <&funnel2_out>; 2689 }; 2690 }; 2691 }; 2692 2693 out-ports { 2694 port { 2695 merge_funnel_out: endpoint { 2696 remote-endpoint = 2697 <&etf_in>; 2698 }; 2699 }; 2700 }; 2701 }; 2702 2703 replicator@3026000 { 2704 compatible = "arm,coresight-dynamic-replicator", "arm,primecell"; 2705 reg = <0x3026000 0x1000>; 2706 2707 clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; 2708 clock-names = "apb_pclk", "atclk"; 2709 2710 in-ports { 2711 port { 2712 replicator_in: endpoint { 2713 remote-endpoint = 2714 <&etf_out>; 2715 }; 2716 }; 2717 }; 2718 2719 out-ports { 2720 #address-cells = <1>; 2721 #size-cells = <0>; 2722 2723 port@0 { 2724 reg = <0>; 2725 replicator_out0: endpoint { 2726 remote-endpoint = 2727 <&etr_in>; 2728 }; 2729 }; 2730 2731 port@1 { 2732 reg = <1>; 2733 replicator_out1: endpoint { 2734 remote-endpoint = 2735 <&tpiu_in>; 2736 }; 2737 }; 2738 }; 2739 }; 2740 2741 etf@3027000 { 2742 compatible = "arm,coresight-tmc", "arm,primecell"; 2743 reg = <0x3027000 0x1000>; 2744 2745 clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; 2746 clock-names = "apb_pclk", "atclk"; 2747 2748 in-ports { 2749 port { 2750 etf_in: endpoint { 2751 remote-endpoint = 2752 <&merge_funnel_out>; 2753 }; 2754 }; 2755 }; 2756 2757 out-ports { 2758 port { 2759 etf_out: endpoint { 2760 remote-endpoint = 2761 <&replicator_in>; 2762 }; 2763 }; 2764 }; 2765 }; 2766 2767 etr@3028000 { 2768 compatible = "arm,coresight-tmc", "arm,primecell"; 2769 reg = <0x3028000 0x1000>; 2770 2771 clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; 2772 clock-names = "apb_pclk", "atclk"; 2773 arm,scatter-gather; 2774 2775 in-ports { 2776 port { 2777 etr_in: endpoint { 2778 remote-endpoint = 2779 <&replicator_out0>; 2780 }; 2781 }; 2782 }; 2783 }; 2784 2785 debug@3810000 { 2786 compatible = "arm,coresight-cpu-debug", "arm,primecell"; 2787 reg = <0x3810000 0x1000>; 2788 2789 clocks = <&rpmcc RPM_QDSS_CLK>; 2790 clock-names = "apb_pclk"; 2791 2792 cpu = <&CPU0>; 2793 }; 2794 2795 etm@3840000 { 2796 compatible = "arm,coresight-etm4x", "arm,primecell"; 2797 reg = <0x3840000 0x1000>; 2798 2799 clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; 2800 clock-names = "apb_pclk", "atclk"; 2801 2802 cpu = <&CPU0>; 2803 2804 out-ports { 2805 port { 2806 etm0_out: endpoint { 2807 remote-endpoint = 2808 <&apss_funnel0_in0>; 2809 }; 2810 }; 2811 }; 2812 }; 2813 2814 debug@3910000 { 2815 compatible = "arm,coresight-cpu-debug", "arm,primecell"; 2816 reg = <0x3910000 0x1000>; 2817 2818 clocks = <&rpmcc RPM_QDSS_CLK>; 2819 clock-names = "apb_pclk"; 2820 2821 cpu = <&CPU1>; 2822 }; 2823 2824 etm@3940000 { 2825 compatible = "arm,coresight-etm4x", "arm,primecell"; 2826 reg = <0x3940000 0x1000>; 2827 2828 clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; 2829 clock-names = "apb_pclk", "atclk"; 2830 2831 cpu = <&CPU1>; 2832 2833 out-ports { 2834 port { 2835 etm1_out: endpoint { 2836 remote-endpoint = 2837 <&apss_funnel0_in1>; 2838 }; 2839 }; 2840 }; 2841 }; 2842 2843 funnel@39b0000 { /* APSS Funnel 0 */ 2844 compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; 2845 reg = <0x39b0000 0x1000>; 2846 2847 clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; 2848 clock-names = "apb_pclk", "atclk"; 2849 2850 in-ports { 2851 #address-cells = <1>; 2852 #size-cells = <0>; 2853 2854 port@0 { 2855 reg = <0>; 2856 apss_funnel0_in0: endpoint { 2857 remote-endpoint = <&etm0_out>; 2858 }; 2859 }; 2860 2861 port@1 { 2862 reg = <1>; 2863 apss_funnel0_in1: endpoint { 2864 remote-endpoint = <&etm1_out>; 2865 }; 2866 }; 2867 }; 2868 2869 out-ports { 2870 port { 2871 apss_funnel0_out: endpoint { 2872 remote-endpoint = 2873 <&apss_merge_funnel_in0>; 2874 }; 2875 }; 2876 }; 2877 }; 2878 2879 debug@3a10000 { 2880 compatible = "arm,coresight-cpu-debug", "arm,primecell"; 2881 reg = <0x3a10000 0x1000>; 2882 2883 clocks = <&rpmcc RPM_QDSS_CLK>; 2884 clock-names = "apb_pclk"; 2885 2886 cpu = <&CPU2>; 2887 }; 2888 2889 etm@3a40000 { 2890 compatible = "arm,coresight-etm4x", "arm,primecell"; 2891 reg = <0x3a40000 0x1000>; 2892 2893 clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; 2894 clock-names = "apb_pclk", "atclk"; 2895 2896 cpu = <&CPU2>; 2897 2898 out-ports { 2899 port { 2900 etm2_out: endpoint { 2901 remote-endpoint = 2902 <&apss_funnel1_in0>; 2903 }; 2904 }; 2905 }; 2906 }; 2907 2908 debug@3b10000 { 2909 compatible = "arm,coresight-cpu-debug", "arm,primecell"; 2910 reg = <0x3b10000 0x1000>; 2911 2912 clocks = <&rpmcc RPM_QDSS_CLK>; 2913 clock-names = "apb_pclk"; 2914 2915 cpu = <&CPU3>; 2916 }; 2917 2918 etm@3b40000 { 2919 compatible = "arm,coresight-etm4x", "arm,primecell"; 2920 reg = <0x3b40000 0x1000>; 2921 2922 clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; 2923 clock-names = "apb_pclk", "atclk"; 2924 2925 cpu = <&CPU3>; 2926 2927 out-ports { 2928 port { 2929 etm3_out: endpoint { 2930 remote-endpoint = 2931 <&apss_funnel1_in1>; 2932 }; 2933 }; 2934 }; 2935 }; 2936 2937 funnel@3bb0000 { /* APSS Funnel 1 */ 2938 compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; 2939 reg = <0x3bb0000 0x1000>; 2940 2941 clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; 2942 clock-names = "apb_pclk", "atclk"; 2943 2944 in-ports { 2945 #address-cells = <1>; 2946 #size-cells = <0>; 2947 2948 port@0 { 2949 reg = <0>; 2950 apss_funnel1_in0: endpoint { 2951 remote-endpoint = <&etm2_out>; 2952 }; 2953 }; 2954 2955 port@1 { 2956 reg = <1>; 2957 apss_funnel1_in1: endpoint { 2958 remote-endpoint = <&etm3_out>; 2959 }; 2960 }; 2961 }; 2962 2963 out-ports { 2964 port { 2965 apss_funnel1_out: endpoint { 2966 remote-endpoint = 2967 <&apss_merge_funnel_in1>; 2968 }; 2969 }; 2970 }; 2971 }; 2972 2973 funnel@3bc0000 { 2974 compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; 2975 reg = <0x3bc0000 0x1000>; 2976 2977 clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; 2978 clock-names = "apb_pclk", "atclk"; 2979 2980 in-ports { 2981 #address-cells = <1>; 2982 #size-cells = <0>; 2983 2984 port@0 { 2985 reg = <0>; 2986 apss_merge_funnel_in0: endpoint { 2987 remote-endpoint = 2988 <&apss_funnel0_out>; 2989 }; 2990 }; 2991 2992 port@1 { 2993 reg = <1>; 2994 apss_merge_funnel_in1: endpoint { 2995 remote-endpoint = 2996 <&apss_funnel1_out>; 2997 }; 2998 }; 2999 }; 3000 3001 out-ports { 3002 port { 3003 apss_merge_funnel_out: endpoint { 3004 remote-endpoint = 3005 <&funnel1_in>; 3006 }; 3007 }; 3008 }; 3009 }; 3010 3011 kryocc: clock-controller@6400000 { 3012 compatible = "qcom,msm8996-apcc"; 3013 reg = <0x06400000 0x90000>; 3014 3015 clock-names = "xo", "sys_apcs_aux"; 3016 clocks = <&rpmcc RPM_SMD_XO_A_CLK_SRC>, <&apcs_glb>; 3017 3018 #clock-cells = <1>; 3019 }; 3020 3021 usb3: usb@6af8800 { 3022 compatible = "qcom,msm8996-dwc3", "qcom,dwc3"; 3023 reg = <0x06af8800 0x400>; 3024 #address-cells = <1>; 3025 #size-cells = <1>; 3026 ranges; 3027 3028 interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>, 3029 <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>; 3030 interrupt-names = "hs_phy_irq", "ss_phy_irq"; 3031 3032 clocks = <&gcc GCC_SYS_NOC_USB3_AXI_CLK>, 3033 <&gcc GCC_USB30_MASTER_CLK>, 3034 <&gcc GCC_AGGRE2_USB3_AXI_CLK>, 3035 <&gcc GCC_USB30_SLEEP_CLK>, 3036 <&gcc GCC_USB30_MOCK_UTMI_CLK>; 3037 clock-names = "cfg_noc", 3038 "core", 3039 "iface", 3040 "sleep", 3041 "mock_utmi"; 3042 3043 assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>, 3044 <&gcc GCC_USB30_MASTER_CLK>; 3045 assigned-clock-rates = <19200000>, <120000000>; 3046 3047 interconnects = <&a2noc MASTER_USB3 &bimc SLAVE_EBI_CH0>, 3048 <&bimc MASTER_AMPSS_M0 &snoc SLAVE_USB3>; 3049 interconnect-names = "usb-ddr", "apps-usb"; 3050 3051 power-domains = <&gcc USB30_GDSC>; 3052 status = "disabled"; 3053 3054 usb3_dwc3: usb@6a00000 { 3055 compatible = "snps,dwc3"; 3056 reg = <0x06a00000 0xcc00>; 3057 interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>; 3058 phys = <&hsusb_phy1>, <&usb3phy>; 3059 phy-names = "usb2-phy", "usb3-phy"; 3060 snps,hird-threshold = /bits/ 8 <0>; 3061 snps,dis_u2_susphy_quirk; 3062 snps,dis_enblslpm_quirk; 3063 snps,is-utmi-l1-suspend; 3064 tx-fifo-resize; 3065 }; 3066 }; 3067 3068 usb3phy: phy@7410000 { 3069 compatible = "qcom,msm8996-qmp-usb3-phy"; 3070 reg = <0x07410000 0x1000>; 3071 3072 clocks = <&gcc GCC_USB3_PHY_AUX_CLK>, 3073 <&gcc GCC_USB3_CLKREF_CLK>, 3074 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, 3075 <&gcc GCC_USB3_PHY_PIPE_CLK>; 3076 clock-names = "aux", 3077 "ref", 3078 "cfg_ahb", 3079 "pipe"; 3080 clock-output-names = "usb3_phy_pipe_clk_src"; 3081 #clock-cells = <0>; 3082 #phy-cells = <0>; 3083 3084 resets = <&gcc GCC_USB3_PHY_BCR>, 3085 <&gcc GCC_USB3PHY_PHY_BCR>; 3086 reset-names = "phy", 3087 "phy_phy"; 3088 3089 status = "disabled"; 3090 }; 3091 3092 hsusb_phy1: phy@7411000 { 3093 compatible = "qcom,msm8996-qusb2-phy"; 3094 reg = <0x07411000 0x180>; 3095 #phy-cells = <0>; 3096 3097 clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, 3098 <&gcc GCC_RX1_USB2_CLKREF_CLK>; 3099 clock-names = "cfg_ahb", "ref"; 3100 3101 resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; 3102 nvmem-cells = <&qusb2p_hstx_trim>; 3103 status = "disabled"; 3104 }; 3105 3106 hsusb_phy2: phy@7412000 { 3107 compatible = "qcom,msm8996-qusb2-phy"; 3108 reg = <0x07412000 0x180>; 3109 #phy-cells = <0>; 3110 3111 clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, 3112 <&gcc GCC_RX2_USB2_CLKREF_CLK>; 3113 clock-names = "cfg_ahb", "ref"; 3114 3115 resets = <&gcc GCC_QUSB2PHY_SEC_BCR>; 3116 nvmem-cells = <&qusb2s_hstx_trim>; 3117 status = "disabled"; 3118 }; 3119 3120 sdhc1: mmc@7464900 { 3121 compatible = "qcom,msm8996-sdhci", "qcom,sdhci-msm-v4"; 3122 reg = <0x07464900 0x11c>, <0x07464000 0x800>; 3123 reg-names = "hc", "core"; 3124 3125 interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, 3126 <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>; 3127 interrupt-names = "hc_irq", "pwr_irq"; 3128 3129 clock-names = "iface", "core", "xo"; 3130 clocks = <&gcc GCC_SDCC1_AHB_CLK>, 3131 <&gcc GCC_SDCC1_APPS_CLK>, 3132 <&rpmcc RPM_SMD_XO_CLK_SRC>; 3133 resets = <&gcc GCC_SDCC1_BCR>; 3134 3135 pinctrl-names = "default", "sleep"; 3136 pinctrl-0 = <&sdc1_state_on>; 3137 pinctrl-1 = <&sdc1_state_off>; 3138 3139 bus-width = <8>; 3140 non-removable; 3141 status = "disabled"; 3142 }; 3143 3144 sdhc2: mmc@74a4900 { 3145 compatible = "qcom,msm8996-sdhci", "qcom,sdhci-msm-v4"; 3146 reg = <0x074a4900 0x314>, <0x074a4000 0x800>; 3147 reg-names = "hc", "core"; 3148 3149 interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, 3150 <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; 3151 interrupt-names = "hc_irq", "pwr_irq"; 3152 3153 clock-names = "iface", "core", "xo"; 3154 clocks = <&gcc GCC_SDCC2_AHB_CLK>, 3155 <&gcc GCC_SDCC2_APPS_CLK>, 3156 <&rpmcc RPM_SMD_XO_CLK_SRC>; 3157 resets = <&gcc GCC_SDCC2_BCR>; 3158 3159 pinctrl-names = "default", "sleep"; 3160 pinctrl-0 = <&sdc2_state_on>; 3161 pinctrl-1 = <&sdc2_state_off>; 3162 3163 bus-width = <4>; 3164 status = "disabled"; 3165 }; 3166 3167 blsp1_dma: dma-controller@7544000 { 3168 compatible = "qcom,bam-v1.7.0"; 3169 reg = <0x07544000 0x2b000>; 3170 interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>; 3171 clocks = <&gcc GCC_BLSP1_AHB_CLK>; 3172 clock-names = "bam_clk"; 3173 qcom,controlled-remotely; 3174 #dma-cells = <1>; 3175 qcom,ee = <0>; 3176 }; 3177 3178 blsp1_uart2: serial@7570000 { 3179 compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; 3180 reg = <0x07570000 0x1000>; 3181 interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; 3182 clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, 3183 <&gcc GCC_BLSP1_AHB_CLK>; 3184 clock-names = "core", "iface"; 3185 pinctrl-names = "default", "sleep"; 3186 pinctrl-0 = <&blsp1_uart2_default>; 3187 pinctrl-1 = <&blsp1_uart2_sleep>; 3188 dmas = <&blsp1_dma 2>, <&blsp1_dma 3>; 3189 dma-names = "tx", "rx"; 3190 status = "disabled"; 3191 }; 3192 3193 blsp1_spi1: spi@7575000 { 3194 compatible = "qcom,spi-qup-v2.2.1"; 3195 reg = <0x07575000 0x600>; 3196 interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; 3197 clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>, 3198 <&gcc GCC_BLSP1_AHB_CLK>; 3199 clock-names = "core", "iface"; 3200 pinctrl-names = "default", "sleep"; 3201 pinctrl-0 = <&blsp1_spi1_default>; 3202 pinctrl-1 = <&blsp1_spi1_sleep>; 3203 dmas = <&blsp1_dma 12>, <&blsp1_dma 13>; 3204 dma-names = "tx", "rx"; 3205 #address-cells = <1>; 3206 #size-cells = <0>; 3207 status = "disabled"; 3208 }; 3209 3210 blsp1_i2c3: i2c@7577000 { 3211 compatible = "qcom,i2c-qup-v2.2.1"; 3212 reg = <0x07577000 0x1000>; 3213 interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; 3214 clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, 3215 <&gcc GCC_BLSP1_AHB_CLK>; 3216 clock-names = "core", "iface"; 3217 pinctrl-names = "default", "sleep"; 3218 pinctrl-0 = <&blsp1_i2c3_default>; 3219 pinctrl-1 = <&blsp1_i2c3_sleep>; 3220 dmas = <&blsp1_dma 16>, <&blsp1_dma 17>; 3221 dma-names = "tx", "rx"; 3222 #address-cells = <1>; 3223 #size-cells = <0>; 3224 status = "disabled"; 3225 }; 3226 3227 blsp1_i2c6: i2c@757a000 { 3228 compatible = "qcom,i2c-qup-v2.2.1"; 3229 reg = <0x757a000 0x1000>; 3230 interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; 3231 clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>, 3232 <&gcc GCC_BLSP1_AHB_CLK>; 3233 clock-names = "core", "iface"; 3234 pinctrl-names = "default", "sleep"; 3235 pinctrl-0 = <&blsp1_i2c6_default>; 3236 pinctrl-1 = <&blsp1_i2c6_sleep>; 3237 dmas = <&blsp1_dma 22>, <&blsp1_dma 23>; 3238 dma-names = "tx", "rx"; 3239 #address-cells = <1>; 3240 #size-cells = <0>; 3241 status = "disabled"; 3242 }; 3243 3244 blsp2_dma: dma-controller@7584000 { 3245 compatible = "qcom,bam-v1.7.0"; 3246 reg = <0x07584000 0x2b000>; 3247 interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>; 3248 clocks = <&gcc GCC_BLSP2_AHB_CLK>; 3249 clock-names = "bam_clk"; 3250 qcom,controlled-remotely; 3251 #dma-cells = <1>; 3252 qcom,ee = <0>; 3253 }; 3254 3255 blsp2_uart2: serial@75b0000 { 3256 compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; 3257 reg = <0x075b0000 0x1000>; 3258 interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; 3259 clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>, 3260 <&gcc GCC_BLSP2_AHB_CLK>; 3261 clock-names = "core", "iface"; 3262 status = "disabled"; 3263 }; 3264 3265 blsp2_uart3: serial@75b1000 { 3266 compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; 3267 reg = <0x075b1000 0x1000>; 3268 interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>; 3269 clocks = <&gcc GCC_BLSP2_UART3_APPS_CLK>, 3270 <&gcc GCC_BLSP2_AHB_CLK>; 3271 clock-names = "core", "iface"; 3272 status = "disabled"; 3273 }; 3274 3275 blsp2_i2c1: i2c@75b5000 { 3276 compatible = "qcom,i2c-qup-v2.2.1"; 3277 reg = <0x075b5000 0x1000>; 3278 interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; 3279 clocks = <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>, 3280 <&gcc GCC_BLSP2_AHB_CLK>; 3281 clock-names = "core", "iface"; 3282 pinctrl-names = "default", "sleep"; 3283 pinctrl-0 = <&blsp2_i2c1_default>; 3284 pinctrl-1 = <&blsp2_i2c1_sleep>; 3285 dmas = <&blsp2_dma 12>, <&blsp2_dma 13>; 3286 dma-names = "tx", "rx"; 3287 #address-cells = <1>; 3288 #size-cells = <0>; 3289 status = "disabled"; 3290 }; 3291 3292 blsp2_i2c2: i2c@75b6000 { 3293 compatible = "qcom,i2c-qup-v2.2.1"; 3294 reg = <0x075b6000 0x1000>; 3295 interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; 3296 clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>, 3297 <&gcc GCC_BLSP2_AHB_CLK>; 3298 clock-names = "core", "iface"; 3299 pinctrl-names = "default", "sleep"; 3300 pinctrl-0 = <&blsp2_i2c2_default>; 3301 pinctrl-1 = <&blsp2_i2c2_sleep>; 3302 dmas = <&blsp2_dma 14>, <&blsp2_dma 15>; 3303 dma-names = "tx", "rx"; 3304 #address-cells = <1>; 3305 #size-cells = <0>; 3306 status = "disabled"; 3307 }; 3308 3309 blsp2_i2c3: i2c@75b7000 { 3310 compatible = "qcom,i2c-qup-v2.2.1"; 3311 reg = <0x075b7000 0x1000>; 3312 interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; 3313 clocks = <&gcc GCC_BLSP2_QUP3_I2C_APPS_CLK>, 3314 <&gcc GCC_BLSP2_AHB_CLK>; 3315 clock-names = "core", "iface"; 3316 clock-frequency = <400000>; 3317 pinctrl-names = "default", "sleep"; 3318 pinctrl-0 = <&blsp2_i2c3_default>; 3319 pinctrl-1 = <&blsp2_i2c3_sleep>; 3320 dmas = <&blsp2_dma 16>, <&blsp2_dma 17>; 3321 dma-names = "tx", "rx"; 3322 #address-cells = <1>; 3323 #size-cells = <0>; 3324 status = "disabled"; 3325 }; 3326 3327 blsp2_i2c5: i2c@75b9000 { 3328 compatible = "qcom,i2c-qup-v2.2.1"; 3329 reg = <0x75b9000 0x1000>; 3330 interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; 3331 clocks = <&gcc GCC_BLSP2_QUP5_I2C_APPS_CLK>, 3332 <&gcc GCC_BLSP2_AHB_CLK>; 3333 clock-names = "core", "iface"; 3334 pinctrl-names = "default"; 3335 pinctrl-0 = <&blsp2_i2c5_default>; 3336 dmas = <&blsp2_dma 20>, <&blsp2_dma 21>; 3337 dma-names = "tx", "rx"; 3338 #address-cells = <1>; 3339 #size-cells = <0>; 3340 status = "disabled"; 3341 }; 3342 3343 blsp2_i2c6: i2c@75ba000 { 3344 compatible = "qcom,i2c-qup-v2.2.1"; 3345 reg = <0x75ba000 0x1000>; 3346 interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; 3347 clocks = <&gcc GCC_BLSP2_QUP6_I2C_APPS_CLK>, 3348 <&gcc GCC_BLSP2_AHB_CLK>; 3349 clock-names = "core", "iface"; 3350 pinctrl-names = "default", "sleep"; 3351 pinctrl-0 = <&blsp2_i2c6_default>; 3352 pinctrl-1 = <&blsp2_i2c6_sleep>; 3353 dmas = <&blsp2_dma 22>, <&blsp2_dma 23>; 3354 dma-names = "tx", "rx"; 3355 #address-cells = <1>; 3356 #size-cells = <0>; 3357 status = "disabled"; 3358 }; 3359 3360 blsp2_spi6: spi@75ba000 { 3361 compatible = "qcom,spi-qup-v2.2.1"; 3362 reg = <0x075ba000 0x600>; 3363 interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; 3364 clocks = <&gcc GCC_BLSP2_QUP6_SPI_APPS_CLK>, 3365 <&gcc GCC_BLSP2_AHB_CLK>; 3366 clock-names = "core", "iface"; 3367 pinctrl-names = "default", "sleep"; 3368 pinctrl-0 = <&blsp2_spi6_default>; 3369 pinctrl-1 = <&blsp2_spi6_sleep>; 3370 dmas = <&blsp2_dma 22>, <&blsp2_dma 23>; 3371 dma-names = "tx", "rx"; 3372 #address-cells = <1>; 3373 #size-cells = <0>; 3374 status = "disabled"; 3375 }; 3376 3377 usb2: usb@76f8800 { 3378 compatible = "qcom,msm8996-dwc3", "qcom,dwc3"; 3379 reg = <0x076f8800 0x400>; 3380 #address-cells = <1>; 3381 #size-cells = <1>; 3382 ranges; 3383 3384 interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>, 3385 <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>, 3386 <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>; 3387 interrupt-names = "pwr_event", 3388 "qusb2_phy", 3389 "hs_phy_irq"; 3390 3391 clocks = <&gcc GCC_PERIPH_NOC_USB20_AHB_CLK>, 3392 <&gcc GCC_USB20_MASTER_CLK>, 3393 <&gcc GCC_USB20_MOCK_UTMI_CLK>, 3394 <&gcc GCC_USB20_SLEEP_CLK>, 3395 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>; 3396 clock-names = "cfg_noc", 3397 "core", 3398 "iface", 3399 "sleep", 3400 "mock_utmi"; 3401 3402 assigned-clocks = <&gcc GCC_USB20_MOCK_UTMI_CLK>, 3403 <&gcc GCC_USB20_MASTER_CLK>; 3404 assigned-clock-rates = <19200000>, <60000000>; 3405 3406 power-domains = <&gcc USB30_GDSC>; 3407 qcom,select-utmi-as-pipe-clk; 3408 status = "disabled"; 3409 3410 usb2_dwc3: usb@7600000 { 3411 compatible = "snps,dwc3"; 3412 reg = <0x07600000 0xcc00>; 3413 interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; 3414 phys = <&hsusb_phy2>; 3415 phy-names = "usb2-phy"; 3416 maximum-speed = "high-speed"; 3417 snps,dis_u2_susphy_quirk; 3418 snps,dis_enblslpm_quirk; 3419 }; 3420 }; 3421 3422 slimbam: dma-controller@9184000 { 3423 compatible = "qcom,bam-v1.7.0"; 3424 qcom,controlled-remotely; 3425 reg = <0x09184000 0x32000>; 3426 num-channels = <31>; 3427 interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>; 3428 #dma-cells = <1>; 3429 qcom,ee = <1>; 3430 qcom,num-ees = <2>; 3431 }; 3432 3433 slim_msm: slim-ngd@91c0000 { 3434 compatible = "qcom,slim-ngd-v1.5.0"; 3435 reg = <0x091c0000 0x2c000>; 3436 interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>; 3437 dmas = <&slimbam 3>, <&slimbam 4>; 3438 dma-names = "rx", "tx"; 3439 #address-cells = <1>; 3440 #size-cells = <0>; 3441 3442 status = "disabled"; 3443 }; 3444 3445 adsp_pil: remoteproc@9300000 { 3446 compatible = "qcom,msm8996-adsp-pil"; 3447 reg = <0x09300000 0x80000>; 3448 3449 interrupts-extended = <&intc 0 162 IRQ_TYPE_EDGE_RISING>, 3450 <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, 3451 <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, 3452 <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, 3453 <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; 3454 interrupt-names = "wdog", "fatal", "ready", 3455 "handover", "stop-ack"; 3456 3457 clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>; 3458 clock-names = "xo"; 3459 3460 memory-region = <&adsp_mem>; 3461 3462 qcom,smem-states = <&adsp_smp2p_out 0>; 3463 qcom,smem-state-names = "stop"; 3464 3465 power-domains = <&rpmpd MSM8996_VDDCX>; 3466 power-domain-names = "cx"; 3467 3468 status = "disabled"; 3469 3470 smd-edge { 3471 interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>; 3472 3473 label = "lpass"; 3474 mboxes = <&apcs_glb 8>; 3475 qcom,smd-edge = <1>; 3476 qcom,remote-pid = <2>; 3477 3478 apr { 3479 power-domains = <&gcc HLOS1_VOTE_LPASS_ADSP_GDSC>; 3480 compatible = "qcom,apr-v2"; 3481 qcom,smd-channels = "apr_audio_svc"; 3482 qcom,domain = <APR_DOMAIN_ADSP>; 3483 #address-cells = <1>; 3484 #size-cells = <0>; 3485 3486 service@3 { 3487 reg = <APR_SVC_ADSP_CORE>; 3488 compatible = "qcom,q6core"; 3489 }; 3490 3491 q6afe: service@4 { 3492 compatible = "qcom,q6afe"; 3493 reg = <APR_SVC_AFE>; 3494 q6afedai: dais { 3495 compatible = "qcom,q6afe-dais"; 3496 #address-cells = <1>; 3497 #size-cells = <0>; 3498 #sound-dai-cells = <1>; 3499 dai@1 { 3500 reg = <1>; 3501 }; 3502 }; 3503 }; 3504 3505 q6asm: service@7 { 3506 compatible = "qcom,q6asm"; 3507 reg = <APR_SVC_ASM>; 3508 q6asmdai: dais { 3509 compatible = "qcom,q6asm-dais"; 3510 #address-cells = <1>; 3511 #size-cells = <0>; 3512 #sound-dai-cells = <1>; 3513 iommus = <&lpass_q6_smmu 1>; 3514 }; 3515 }; 3516 3517 q6adm: service@8 { 3518 compatible = "qcom,q6adm"; 3519 reg = <APR_SVC_ADM>; 3520 q6routing: routing { 3521 compatible = "qcom,q6adm-routing"; 3522 #sound-dai-cells = <0>; 3523 }; 3524 }; 3525 }; 3526 }; 3527 }; 3528 3529 apcs_glb: mailbox@9820000 { 3530 compatible = "qcom,msm8996-apcs-hmss-global"; 3531 reg = <0x09820000 0x1000>; 3532 3533 #mbox-cells = <1>; 3534 #clock-cells = <0>; 3535 }; 3536 3537 timer@9840000 { 3538 #address-cells = <1>; 3539 #size-cells = <1>; 3540 ranges; 3541 compatible = "arm,armv7-timer-mem"; 3542 reg = <0x09840000 0x1000>; 3543 clock-frequency = <19200000>; 3544 3545 frame@9850000 { 3546 frame-number = <0>; 3547 interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>, 3548 <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; 3549 reg = <0x09850000 0x1000>, 3550 <0x09860000 0x1000>; 3551 }; 3552 3553 frame@9870000 { 3554 frame-number = <1>; 3555 interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; 3556 reg = <0x09870000 0x1000>; 3557 status = "disabled"; 3558 }; 3559 3560 frame@9880000 { 3561 frame-number = <2>; 3562 interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; 3563 reg = <0x09880000 0x1000>; 3564 status = "disabled"; 3565 }; 3566 3567 frame@9890000 { 3568 frame-number = <3>; 3569 interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; 3570 reg = <0x09890000 0x1000>; 3571 status = "disabled"; 3572 }; 3573 3574 frame@98a0000 { 3575 frame-number = <4>; 3576 interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; 3577 reg = <0x098a0000 0x1000>; 3578 status = "disabled"; 3579 }; 3580 3581 frame@98b0000 { 3582 frame-number = <5>; 3583 interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; 3584 reg = <0x098b0000 0x1000>; 3585 status = "disabled"; 3586 }; 3587 3588 frame@98c0000 { 3589 frame-number = <6>; 3590 interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; 3591 reg = <0x098c0000 0x1000>; 3592 status = "disabled"; 3593 }; 3594 }; 3595 3596 saw3: syscon@9a10000 { 3597 compatible = "syscon"; 3598 reg = <0x09a10000 0x1000>; 3599 }; 3600 3601 cbf: clock-controller@9a11000 { 3602 compatible = "qcom,msm8996-cbf"; 3603 reg = <0x09a11000 0x10000>; 3604 clocks = <&rpmcc RPM_SMD_XO_A_CLK_SRC>, <&apcs_glb>; 3605 #clock-cells = <0>; 3606 #interconnect-cells = <1>; 3607 }; 3608 3609 intc: interrupt-controller@9bc0000 { 3610 compatible = "qcom,msm8996-gic-v3", "arm,gic-v3"; 3611 #interrupt-cells = <3>; 3612 interrupt-controller; 3613 #redistributor-regions = <1>; 3614 redistributor-stride = <0x0 0x40000>; 3615 reg = <0x09bc0000 0x10000>, 3616 <0x09c00000 0x100000>; 3617 interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; 3618 }; 3619 }; 3620 3621 sound: sound { 3622 }; 3623 3624 thermal-zones { 3625 cpu0-thermal { 3626 polling-delay-passive = <250>; 3627 polling-delay = <1000>; 3628 3629 thermal-sensors = <&tsens0 3>; 3630 3631 trips { 3632 cpu0_alert0: trip-point0 { 3633 temperature = <75000>; 3634 hysteresis = <2000>; 3635 type = "passive"; 3636 }; 3637 3638 cpu0_crit: cpu-crit { 3639 temperature = <110000>; 3640 hysteresis = <2000>; 3641 type = "critical"; 3642 }; 3643 }; 3644 }; 3645 3646 cpu1-thermal { 3647 polling-delay-passive = <250>; 3648 polling-delay = <1000>; 3649 3650 thermal-sensors = <&tsens0 5>; 3651 3652 trips { 3653 cpu1_alert0: trip-point0 { 3654 temperature = <75000>; 3655 hysteresis = <2000>; 3656 type = "passive"; 3657 }; 3658 3659 cpu1_crit: cpu-crit { 3660 temperature = <110000>; 3661 hysteresis = <2000>; 3662 type = "critical"; 3663 }; 3664 }; 3665 }; 3666 3667 cpu2-thermal { 3668 polling-delay-passive = <250>; 3669 polling-delay = <1000>; 3670 3671 thermal-sensors = <&tsens0 8>; 3672 3673 trips { 3674 cpu2_alert0: trip-point0 { 3675 temperature = <75000>; 3676 hysteresis = <2000>; 3677 type = "passive"; 3678 }; 3679 3680 cpu2_crit: cpu-crit { 3681 temperature = <110000>; 3682 hysteresis = <2000>; 3683 type = "critical"; 3684 }; 3685 }; 3686 }; 3687 3688 cpu3-thermal { 3689 polling-delay-passive = <250>; 3690 polling-delay = <1000>; 3691 3692 thermal-sensors = <&tsens0 10>; 3693 3694 trips { 3695 cpu3_alert0: trip-point0 { 3696 temperature = <75000>; 3697 hysteresis = <2000>; 3698 type = "passive"; 3699 }; 3700 3701 cpu3_crit: cpu-crit { 3702 temperature = <110000>; 3703 hysteresis = <2000>; 3704 type = "critical"; 3705 }; 3706 }; 3707 }; 3708 3709 gpu-top-thermal { 3710 polling-delay-passive = <250>; 3711 polling-delay = <1000>; 3712 3713 thermal-sensors = <&tsens1 6>; 3714 3715 trips { 3716 gpu1_alert0: trip-point0 { 3717 temperature = <90000>; 3718 hysteresis = <2000>; 3719 type = "passive"; 3720 }; 3721 }; 3722 3723 cooling-maps { 3724 map0 { 3725 trip = <&gpu1_alert0>; 3726 cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; 3727 }; 3728 }; 3729 }; 3730 3731 gpu-bottom-thermal { 3732 polling-delay-passive = <250>; 3733 polling-delay = <1000>; 3734 3735 thermal-sensors = <&tsens1 7>; 3736 3737 trips { 3738 gpu2_alert0: trip-point0 { 3739 temperature = <90000>; 3740 hysteresis = <2000>; 3741 type = "passive"; 3742 }; 3743 }; 3744 3745 cooling-maps { 3746 map0 { 3747 trip = <&gpu2_alert0>; 3748 cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; 3749 }; 3750 }; 3751 }; 3752 3753 m4m-thermal { 3754 polling-delay-passive = <250>; 3755 polling-delay = <1000>; 3756 3757 thermal-sensors = <&tsens0 1>; 3758 3759 trips { 3760 m4m_alert0: trip-point0 { 3761 temperature = <90000>; 3762 hysteresis = <2000>; 3763 type = "hot"; 3764 }; 3765 }; 3766 }; 3767 3768 l3-or-venus-thermal { 3769 polling-delay-passive = <250>; 3770 polling-delay = <1000>; 3771 3772 thermal-sensors = <&tsens0 2>; 3773 3774 trips { 3775 l3_or_venus_alert0: trip-point0 { 3776 temperature = <90000>; 3777 hysteresis = <2000>; 3778 type = "hot"; 3779 }; 3780 }; 3781 }; 3782 3783 cluster0-l2-thermal { 3784 polling-delay-passive = <250>; 3785 polling-delay = <1000>; 3786 3787 thermal-sensors = <&tsens0 7>; 3788 3789 trips { 3790 cluster0_l2_alert0: trip-point0 { 3791 temperature = <90000>; 3792 hysteresis = <2000>; 3793 type = "hot"; 3794 }; 3795 }; 3796 }; 3797 3798 cluster1-l2-thermal { 3799 polling-delay-passive = <250>; 3800 polling-delay = <1000>; 3801 3802 thermal-sensors = <&tsens0 12>; 3803 3804 trips { 3805 cluster1_l2_alert0: trip-point0 { 3806 temperature = <90000>; 3807 hysteresis = <2000>; 3808 type = "hot"; 3809 }; 3810 }; 3811 }; 3812 3813 camera-thermal { 3814 polling-delay-passive = <250>; 3815 polling-delay = <1000>; 3816 3817 thermal-sensors = <&tsens1 1>; 3818 3819 trips { 3820 camera_alert0: trip-point0 { 3821 temperature = <90000>; 3822 hysteresis = <2000>; 3823 type = "hot"; 3824 }; 3825 }; 3826 }; 3827 3828 q6-dsp-thermal { 3829 polling-delay-passive = <250>; 3830 polling-delay = <1000>; 3831 3832 thermal-sensors = <&tsens1 2>; 3833 3834 trips { 3835 q6_dsp_alert0: trip-point0 { 3836 temperature = <90000>; 3837 hysteresis = <2000>; 3838 type = "hot"; 3839 }; 3840 }; 3841 }; 3842 3843 mem-thermal { 3844 polling-delay-passive = <250>; 3845 polling-delay = <1000>; 3846 3847 thermal-sensors = <&tsens1 3>; 3848 3849 trips { 3850 mem_alert0: trip-point0 { 3851 temperature = <90000>; 3852 hysteresis = <2000>; 3853 type = "hot"; 3854 }; 3855 }; 3856 }; 3857 3858 modemtx-thermal { 3859 polling-delay-passive = <250>; 3860 polling-delay = <1000>; 3861 3862 thermal-sensors = <&tsens1 4>; 3863 3864 trips { 3865 modemtx_alert0: trip-point0 { 3866 temperature = <90000>; 3867 hysteresis = <2000>; 3868 type = "hot"; 3869 }; 3870 }; 3871 }; 3872 }; 3873 3874 timer { 3875 compatible = "arm,armv8-timer"; 3876 interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, 3877 <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, 3878 <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, 3879 <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; 3880 }; 3881}; 3882