1// SPDX-License-Identifier: BSD-3-Clause 2/* Copyright (c) 2022, The Linux Foundation. All rights reserved. */ 3 4#include <dt-bindings/clock/qcom,gcc-msm8953.h> 5#include <dt-bindings/clock/qcom,rpmcc.h> 6#include <dt-bindings/gpio/gpio.h> 7#include <dt-bindings/interrupt-controller/arm-gic.h> 8#include <dt-bindings/power/qcom-rpmpd.h> 9#include <dt-bindings/soc/qcom,apr.h> 10#include <dt-bindings/sound/qcom,q6afe.h> 11#include <dt-bindings/sound/qcom,q6asm.h> 12#include <dt-bindings/thermal/thermal.h> 13 14/ { 15 interrupt-parent = <&intc>; 16 17 #address-cells = <2>; 18 #size-cells = <2>; 19 20 chosen { }; 21 22 clocks { 23 sleep_clk: sleep-clk { 24 compatible = "fixed-clock"; 25 #clock-cells = <0>; 26 clock-frequency = <32768>; 27 }; 28 29 xo_board: xo-board { 30 compatible = "fixed-clock"; 31 #clock-cells = <0>; 32 clock-frequency = <19200000>; 33 clock-output-names = "xo"; 34 }; 35 }; 36 37 cpus { 38 #address-cells = <1>; 39 #size-cells = <0>; 40 41 cpu0: cpu@0 { 42 device_type = "cpu"; 43 compatible = "arm,cortex-a53"; 44 reg = <0x0>; 45 enable-method = "psci"; 46 capacity-dmips-mhz = <1024>; 47 next-level-cache = <&l2_0>; 48 #cooling-cells = <2>; 49 }; 50 51 cpu1: cpu@1 { 52 device_type = "cpu"; 53 compatible = "arm,cortex-a53"; 54 reg = <0x1>; 55 enable-method = "psci"; 56 capacity-dmips-mhz = <1024>; 57 next-level-cache = <&l2_0>; 58 #cooling-cells = <2>; 59 }; 60 61 cpu2: cpu@2 { 62 device_type = "cpu"; 63 compatible = "arm,cortex-a53"; 64 reg = <0x2>; 65 enable-method = "psci"; 66 capacity-dmips-mhz = <1024>; 67 next-level-cache = <&l2_0>; 68 #cooling-cells = <2>; 69 }; 70 71 cpu3: cpu@3 { 72 device_type = "cpu"; 73 compatible = "arm,cortex-a53"; 74 reg = <0x3>; 75 enable-method = "psci"; 76 capacity-dmips-mhz = <1024>; 77 next-level-cache = <&l2_0>; 78 #cooling-cells = <2>; 79 }; 80 81 cpu4: cpu@100 { 82 device_type = "cpu"; 83 compatible = "arm,cortex-a53"; 84 reg = <0x100>; 85 enable-method = "psci"; 86 capacity-dmips-mhz = <1024>; 87 next-level-cache = <&l2_1>; 88 #cooling-cells = <2>; 89 }; 90 91 cpu5: cpu@101 { 92 device_type = "cpu"; 93 compatible = "arm,cortex-a53"; 94 reg = <0x101>; 95 enable-method = "psci"; 96 capacity-dmips-mhz = <1024>; 97 next-level-cache = <&l2_1>; 98 #cooling-cells = <2>; 99 }; 100 101 cpu6: cpu@102 { 102 device_type = "cpu"; 103 compatible = "arm,cortex-a53"; 104 reg = <0x102>; 105 enable-method = "psci"; 106 capacity-dmips-mhz = <1024>; 107 next-level-cache = <&l2_1>; 108 #cooling-cells = <2>; 109 }; 110 111 cpu7: cpu@103 { 112 device_type = "cpu"; 113 compatible = "arm,cortex-a53"; 114 reg = <0x103>; 115 enable-method = "psci"; 116 capacity-dmips-mhz = <1024>; 117 next-level-cache = <&l2_1>; 118 #cooling-cells = <2>; 119 }; 120 121 cpu-map { 122 cluster0 { 123 core0 { 124 cpu = <&cpu0>; 125 }; 126 core1 { 127 cpu = <&cpu1>; 128 }; 129 core2 { 130 cpu = <&cpu2>; 131 }; 132 core3 { 133 cpu = <&cpu3>; 134 }; 135 }; 136 137 cluster1 { 138 core0 { 139 cpu = <&cpu4>; 140 }; 141 core1 { 142 cpu = <&cpu5>; 143 }; 144 core2 { 145 cpu = <&cpu6>; 146 }; 147 core3 { 148 cpu = <&cpu7>; 149 }; 150 }; 151 }; 152 153 l2_0: l2-cache-0 { 154 compatible = "cache"; 155 cache-level = <2>; 156 cache-unified; 157 }; 158 159 l2_1: l2-cache-1 { 160 compatible = "cache"; 161 cache-level = <2>; 162 cache-unified; 163 }; 164 }; 165 166 firmware { 167 scm: scm { 168 compatible = "qcom,scm-msm8953", "qcom,scm"; 169 clocks = <&gcc GCC_CRYPTO_CLK>, 170 <&gcc GCC_CRYPTO_AXI_CLK>, 171 <&gcc GCC_CRYPTO_AHB_CLK>; 172 clock-names = "core", "bus", "iface"; 173 #reset-cells = <1>; 174 }; 175 }; 176 177 memory@10000000 { 178 device_type = "memory"; 179 /* We expect the bootloader to fill in the reg */ 180 reg = <0 0x10000000 0 0>; 181 }; 182 183 pmu { 184 compatible = "arm,cortex-a53-pmu"; 185 interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>; 186 }; 187 188 psci { 189 compatible = "arm,psci-1.0"; 190 method = "smc"; 191 }; 192 193 rpm: remoteproc { 194 compatible = "qcom,msm8953-rpm-proc", "qcom,rpm-proc"; 195 196 smd-edge { 197 interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>; 198 mboxes = <&apcs 0>; 199 qcom,smd-edge = <15>; 200 201 rpm_requests: rpm-requests { 202 compatible = "qcom,rpm-msm8953", "qcom,smd-rpm"; 203 qcom,smd-channels = "rpm_requests"; 204 205 rpmcc: clock-controller { 206 compatible = "qcom,rpmcc-msm8953", "qcom,rpmcc"; 207 clocks = <&xo_board>; 208 clock-names = "xo"; 209 #clock-cells = <1>; 210 }; 211 212 rpmpd: power-controller { 213 compatible = "qcom,msm8953-rpmpd"; 214 #power-domain-cells = <1>; 215 operating-points-v2 = <&rpmpd_opp_table>; 216 217 rpmpd_opp_table: opp-table { 218 compatible = "operating-points-v2"; 219 220 rpmpd_opp_ret: opp1 { 221 opp-level = <RPM_SMD_LEVEL_RETENTION>; 222 }; 223 224 rpmpd_opp_ret_plus: opp2 { 225 opp-level = <RPM_SMD_LEVEL_RETENTION_PLUS>; 226 }; 227 228 rpmpd_opp_min_svs: opp3 { 229 opp-level = <RPM_SMD_LEVEL_MIN_SVS>; 230 }; 231 232 rpmpd_opp_low_svs: opp4 { 233 opp-level = <RPM_SMD_LEVEL_LOW_SVS>; 234 }; 235 236 rpmpd_opp_svs: opp5 { 237 opp-level = <RPM_SMD_LEVEL_SVS>; 238 }; 239 240 rpmpd_opp_svs_plus: opp6 { 241 opp-level = <RPM_SMD_LEVEL_SVS_PLUS>; 242 }; 243 244 rpmpd_opp_nom: opp7 { 245 opp-level = <RPM_SMD_LEVEL_NOM>; 246 }; 247 248 rpmpd_opp_nom_plus: opp8 { 249 opp-level = <RPM_SMD_LEVEL_NOM_PLUS>; 250 }; 251 252 rpmpd_opp_turbo: opp9 { 253 opp-level = <RPM_SMD_LEVEL_TURBO>; 254 }; 255 }; 256 }; 257 }; 258 }; 259 }; 260 261 reserved-memory { 262 #address-cells = <2>; 263 #size-cells = <2>; 264 ranges; 265 266 zap_shader_region: zap@81800000 { 267 compatible = "shared-dma-pool"; 268 reg = <0x0 0x81800000 0x0 0x2000>; 269 no-map; 270 }; 271 272 qseecom_mem: qseecom@85b00000 { 273 reg = <0x0 0x85b00000 0x0 0x800000>; 274 no-map; 275 }; 276 277 smem_mem: smem@86300000 { 278 compatible = "qcom,smem"; 279 reg = <0x0 0x86300000 0x0 0x100000>; 280 qcom,rpm-msg-ram = <&rpm_msg_ram>; 281 hwlocks = <&tcsr_mutex 3>; 282 no-map; 283 }; 284 285 reserved@86400000 { 286 reg = <0x0 0x86400000 0x0 0x400000>; 287 no-map; 288 }; 289 290 mpss_mem: mpss@86c00000 { 291 reg = <0x0 0x86c00000 0x0 0x6a00000>; 292 no-map; 293 }; 294 295 adsp_fw_mem: adsp@8d600000 { 296 reg = <0x0 0x8d600000 0x0 0x1100000>; 297 no-map; 298 }; 299 300 wcnss_fw_mem: wcnss@8e700000 { 301 reg = <0x0 0x8e700000 0x0 0x700000>; 302 no-map; 303 }; 304 305 dfps_data_mem: dfps-data@90000000 { 306 reg = <0 0x90000000 0 0x1000>; 307 no-map; 308 }; 309 310 cont_splash_mem: cont-splash@90001000 { 311 reg = <0x0 0x90001000 0x0 0x13ff000>; 312 no-map; 313 }; 314 315 venus_mem: venus@91400000 { 316 reg = <0x0 0x91400000 0x0 0x700000>; 317 no-map; 318 }; 319 320 mba_mem: mba@92000000 { 321 reg = <0x0 0x92000000 0x0 0x100000>; 322 no-map; 323 }; 324 325 rmtfs@f2d00000 { 326 compatible = "qcom,rmtfs-mem"; 327 reg = <0x0 0xf2d00000 0x0 0x180000>; 328 no-map; 329 330 qcom,client-id = <1>; 331 }; 332 }; 333 334 smp2p-adsp { 335 compatible = "qcom,smp2p"; 336 qcom,smem = <443>, <429>; 337 338 interrupts = <GIC_SPI 291 IRQ_TYPE_EDGE_RISING>; 339 340 mboxes = <&apcs 10>; 341 342 qcom,local-pid = <0>; 343 qcom,remote-pid = <2>; 344 345 smp2p_adsp_out: master-kernel { 346 qcom,entry-name = "master-kernel"; 347 #qcom,smem-state-cells = <1>; 348 }; 349 350 smp2p_adsp_in: slave-kernel { 351 qcom,entry-name = "slave-kernel"; 352 353 interrupt-controller; 354 #interrupt-cells = <2>; 355 }; 356 }; 357 358 smp2p-modem { 359 compatible = "qcom,smp2p"; 360 qcom,smem = <435>, <428>; 361 362 interrupts = <GIC_SPI 27 IRQ_TYPE_EDGE_RISING>; 363 364 mboxes = <&apcs 14>; 365 366 qcom,local-pid = <0>; 367 qcom,remote-pid = <1>; 368 369 smp2p_modem_out: master-kernel { 370 qcom,entry-name = "master-kernel"; 371 372 #qcom,smem-state-cells = <1>; 373 }; 374 375 smp2p_modem_in: slave-kernel { 376 qcom,entry-name = "slave-kernel"; 377 378 interrupt-controller; 379 #interrupt-cells = <2>; 380 }; 381 }; 382 383 smp2p-wcnss { 384 compatible = "qcom,smp2p"; 385 qcom,smem = <451>, <431>; 386 387 interrupts = <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>; 388 389 mboxes = <&apcs 18>; 390 391 qcom,local-pid = <0>; 392 qcom,remote-pid = <4>; 393 394 smp2p_wcnss_out: master-kernel { 395 qcom,entry-name = "master-kernel"; 396 397 #qcom,smem-state-cells = <1>; 398 }; 399 400 smp2p_wcnss_in: slave-kernel { 401 qcom,entry-name = "slave-kernel"; 402 403 interrupt-controller; 404 #interrupt-cells = <2>; 405 }; 406 }; 407 408 smsm { 409 compatible = "qcom,smsm"; 410 411 #address-cells = <1>; 412 #size-cells = <0>; 413 414 mboxes = <0>, <&apcs 13>, <0>, <&apcs 19>; 415 416 apps_smsm: apps@0 { 417 reg = <0>; 418 419 #qcom,smem-state-cells = <1>; 420 }; 421 422 modem_smsm: modem@1 { 423 reg = <1>; 424 interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>; 425 426 interrupt-controller; 427 #interrupt-cells = <2>; 428 }; 429 430 wcnss_smsm: wcnss@6 { 431 reg = <6>; 432 interrupts = <GIC_SPI 144 IRQ_TYPE_EDGE_RISING>; 433 434 interrupt-controller; 435 #interrupt-cells = <2>; 436 }; 437 }; 438 439 soc: soc@0 { 440 #address-cells = <1>; 441 #size-cells = <1>; 442 ranges = <0 0 0 0xffffffff>; 443 compatible = "simple-bus"; 444 445 rpm_msg_ram: sram@60000 { 446 compatible = "qcom,rpm-msg-ram"; 447 reg = <0x00060000 0x8000>; 448 }; 449 450 hsusb_phy: phy@79000 { 451 compatible = "qcom,msm8953-qusb2-phy"; 452 reg = <0x00079000 0x180>; 453 #phy-cells = <0>; 454 455 clocks = <&gcc GCC_USB_PHY_CFG_AHB_CLK>, 456 <&gcc GCC_QUSB_REF_CLK>; 457 clock-names = "cfg_ahb", "ref"; 458 459 qcom,tcsr-syscon = <&tcsr_phy_clk_scheme_sel>; 460 461 resets = <&gcc GCC_QUSB2_PHY_BCR>; 462 463 status = "disabled"; 464 }; 465 466 rng@e3000 { 467 compatible = "qcom,prng"; 468 reg = <0x000e3000 0x1000>; 469 clocks = <&gcc GCC_PRNG_AHB_CLK>; 470 clock-names = "core"; 471 }; 472 473 tsens0: thermal-sensor@4a9000 { 474 compatible = "qcom,msm8953-tsens", "qcom,tsens-v2"; 475 reg = <0x004a9000 0x1000>, /* TM */ 476 <0x004a8000 0x1000>; /* SROT */ 477 #qcom,sensors = <16>; 478 interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>, 479 <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>; 480 interrupt-names = "uplow", "critical"; 481 #thermal-sensor-cells = <1>; 482 }; 483 484 restart@4ab000 { 485 compatible = "qcom,pshold"; 486 reg = <0x004ab000 0x4>; 487 }; 488 489 tlmm: pinctrl@1000000 { 490 compatible = "qcom,msm8953-pinctrl"; 491 reg = <0x01000000 0x300000>; 492 interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; 493 gpio-controller; 494 gpio-ranges = <&tlmm 0 0 142>; 495 #gpio-cells = <2>; 496 interrupt-controller; 497 #interrupt-cells = <2>; 498 499 uart_console_active: uart-console-active-state { 500 pins = "gpio4", "gpio5"; 501 function = "blsp_uart2"; 502 drive-strength = <2>; 503 bias-disable; 504 }; 505 506 uart_console_sleep: uart-console-sleep-state { 507 pins = "gpio4", "gpio5"; 508 function = "blsp_uart2"; 509 drive-strength = <2>; 510 bias-pull-down; 511 }; 512 513 sdc1_clk_on: sdc1-clk-on-state { 514 pins = "sdc1_clk"; 515 bias-disable; 516 drive-strength = <16>; 517 }; 518 519 sdc1_clk_off: sdc1-clk-off-state { 520 pins = "sdc1_clk"; 521 bias-disable; 522 drive-strength = <2>; 523 }; 524 525 sdc1_cmd_on: sdc1-cmd-on-state { 526 pins = "sdc1_cmd"; 527 bias-disable; 528 drive-strength = <10>; 529 }; 530 531 sdc1_cmd_off: sdc1-cmd-off-state { 532 pins = "sdc1_cmd"; 533 bias-disable; 534 drive-strength = <2>; 535 }; 536 537 sdc1_data_on: sdc1-data-on-state { 538 pins = "sdc1_data"; 539 bias-pull-up; 540 drive-strength = <10>; 541 }; 542 543 sdc1_data_off: sdc1-data-off-state { 544 pins = "sdc1_data"; 545 bias-pull-up; 546 drive-strength = <2>; 547 }; 548 549 sdc1_rclk_on: sdc1-rclk-on-state { 550 pins = "sdc1_rclk"; 551 bias-pull-down; 552 }; 553 554 sdc1_rclk_off: sdc1-rclk-off-state { 555 pins = "sdc1_rclk"; 556 bias-pull-down; 557 }; 558 559 sdc2_clk_on: sdc2-clk-on-state { 560 pins = "sdc2_clk"; 561 drive-strength = <16>; 562 bias-disable; 563 }; 564 565 sdc2_clk_off: sdc2-clk-off-state { 566 pins = "sdc2_clk"; 567 bias-disable; 568 drive-strength = <2>; 569 }; 570 571 sdc2_cmd_on: sdc2-cmd-on-state { 572 pins = "sdc2_cmd"; 573 bias-pull-up; 574 drive-strength = <10>; 575 }; 576 577 sdc2_cmd_off: sdc2-cmd-off-state { 578 pins = "sdc2_cmd"; 579 bias-pull-up; 580 drive-strength = <2>; 581 }; 582 583 sdc2_data_on: sdc2-data-on-state { 584 pins = "sdc2_data"; 585 bias-pull-up; 586 drive-strength = <10>; 587 }; 588 589 sdc2_data_off: sdc2-data-off-state { 590 pins = "sdc2_data"; 591 bias-pull-up; 592 drive-strength = <2>; 593 }; 594 595 sdc2_cd_on: cd-on-state { 596 pins = "gpio133"; 597 function = "gpio"; 598 drive-strength = <2>; 599 bias-pull-up; 600 }; 601 602 sdc2_cd_off: cd-off-state { 603 pins = "gpio133"; 604 function = "gpio"; 605 drive-strength = <2>; 606 bias-disable; 607 }; 608 609 gpio_key_default: gpio-key-default-state { 610 pins = "gpio85"; 611 function = "gpio"; 612 drive-strength = <2>; 613 bias-pull-up; 614 }; 615 616 i2c_1_default: i2c-1-default-state { 617 pins = "gpio2", "gpio3"; 618 function = "blsp_i2c1"; 619 drive-strength = <2>; 620 bias-disable; 621 }; 622 623 i2c_1_sleep: i2c-1-sleep-state { 624 pins = "gpio2", "gpio3"; 625 function = "gpio"; 626 drive-strength = <2>; 627 bias-disable; 628 }; 629 630 i2c_2_default: i2c-2-default-state { 631 pins = "gpio6", "gpio7"; 632 function = "blsp_i2c2"; 633 drive-strength = <2>; 634 bias-disable; 635 }; 636 637 i2c_2_sleep: i2c-2-sleep-state { 638 pins = "gpio6", "gpio7"; 639 function = "gpio"; 640 drive-strength = <2>; 641 bias-disable; 642 }; 643 644 i2c_3_default: i2c-3-default-state { 645 pins = "gpio10", "gpio11"; 646 function = "blsp_i2c3"; 647 drive-strength = <2>; 648 bias-disable; 649 }; 650 651 i2c_3_sleep: i2c-3-sleep-state { 652 pins = "gpio10", "gpio11"; 653 function = "gpio"; 654 drive-strength = <2>; 655 bias-disable; 656 }; 657 658 i2c_4_default: i2c-4-default-state { 659 pins = "gpio14", "gpio15"; 660 function = "blsp_i2c4"; 661 drive-strength = <2>; 662 bias-disable; 663 }; 664 665 i2c_4_sleep: i2c-4-sleep-state { 666 pins = "gpio14", "gpio15"; 667 function = "gpio"; 668 drive-strength = <2>; 669 bias-disable; 670 }; 671 672 i2c_5_default: i2c-5-default-state { 673 pins = "gpio18", "gpio19"; 674 function = "blsp_i2c5"; 675 drive-strength = <2>; 676 bias-disable; 677 }; 678 679 i2c_5_sleep: i2c-5-sleep-state { 680 pins = "gpio18", "gpio19"; 681 function = "gpio"; 682 drive-strength = <2>; 683 bias-disable; 684 }; 685 686 i2c_6_default: i2c-6-default-state { 687 pins = "gpio22", "gpio23"; 688 function = "blsp_i2c6"; 689 drive-strength = <2>; 690 bias-disable; 691 }; 692 693 i2c_6_sleep: i2c-6-sleep-state { 694 pins = "gpio22", "gpio23"; 695 function = "gpio"; 696 drive-strength = <2>; 697 bias-disable; 698 }; 699 700 i2c_7_default: i2c-7-default-state { 701 pins = "gpio135", "gpio136"; 702 function = "blsp_i2c7"; 703 drive-strength = <2>; 704 bias-disable; 705 }; 706 707 i2c_7_sleep: i2c-7-sleep-state { 708 pins = "gpio135", "gpio136"; 709 function = "gpio"; 710 drive-strength = <2>; 711 bias-disable; 712 }; 713 714 i2c_8_default: i2c-8-default-state { 715 pins = "gpio98", "gpio99"; 716 function = "blsp_i2c8"; 717 drive-strength = <2>; 718 bias-disable; 719 }; 720 721 i2c_8_sleep: i2c-8-sleep-state { 722 pins = "gpio98", "gpio99"; 723 function = "gpio"; 724 drive-strength = <2>; 725 bias-disable; 726 }; 727 728 spi_3_default: spi-3-default-state { 729 pins = "gpio10", "gpio11"; 730 function = "blsp_spi3"; 731 drive-strength = <2>; 732 bias-disable; 733 }; 734 735 spi_3_sleep: spi-3-sleep-state { 736 pins = "gpio10", "gpio11"; 737 function = "gpio"; 738 drive-strength = <2>; 739 bias-disable; 740 }; 741 742 spi_5_default: spi-5-default-state { 743 pins = "gpio18", "gpio19"; 744 function = "blsp_spi5"; 745 drive-strength = <2>; 746 bias-disable; 747 }; 748 749 spi_5_sleep: spi-5-sleep-state { 750 pins = "gpio18", "gpio19"; 751 function = "gpio"; 752 drive-strength = <2>; 753 bias-disable; 754 }; 755 756 spi_6_default: spi-6-default-state { 757 pins = "gpio22", "gpio23"; 758 function = "blsp_spi6"; 759 drive-strength = <2>; 760 bias-disable; 761 }; 762 763 spi_6_sleep: spi-6-sleep-state { 764 pins = "gpio22", "gpio23"; 765 function = "gpio"; 766 drive-strength = <2>; 767 bias-disable; 768 }; 769 770 wcnss_pin_a: wcnss-active-state { 771 772 wcss-wlan2-pins { 773 pins = "gpio76"; 774 function = "wcss_wlan2"; 775 drive-strength = <6>; 776 bias-pull-up; 777 }; 778 779 wcss-wlan1-pins { 780 pins = "gpio77"; 781 function = "wcss_wlan1"; 782 drive-strength = <6>; 783 bias-pull-up; 784 }; 785 786 wcss-wlan0-pins { 787 pins = "gpio78"; 788 function = "wcss_wlan0"; 789 drive-strength = <6>; 790 bias-pull-up; 791 }; 792 793 wcss-wlan-pins { 794 pins = "gpio79", "gpio80"; 795 function = "wcss_wlan"; 796 drive-strength = <6>; 797 bias-pull-up; 798 }; 799 }; 800 }; 801 802 gcc: clock-controller@1800000 { 803 compatible = "qcom,gcc-msm8953"; 804 reg = <0x01800000 0x80000>; 805 #clock-cells = <1>; 806 #reset-cells = <1>; 807 #power-domain-cells = <1>; 808 clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, 809 <&sleep_clk>, 810 <&mdss_dsi0_phy 1>, 811 <&mdss_dsi0_phy 0>, 812 <&mdss_dsi1_phy 1>, 813 <&mdss_dsi1_phy 0>; 814 clock-names = "xo", 815 "sleep", 816 "dsi0pll", 817 "dsi0pllbyte", 818 "dsi1pll", 819 "dsi1pllbyte"; 820 }; 821 822 tcsr_mutex: hwlock@1905000 { 823 compatible = "qcom,tcsr-mutex"; 824 reg = <0x01905000 0x20000>; 825 #hwlock-cells = <1>; 826 }; 827 828 tcsr: syscon@1937000 { 829 compatible = "qcom,tcsr-msm8953", "syscon"; 830 reg = <0x01937000 0x30000>; 831 }; 832 833 tcsr_phy_clk_scheme_sel: syscon@193f044 { 834 compatible = "qcom,tcsr-msm8953", "syscon"; 835 reg = <0x0193f044 0x4>; 836 }; 837 838 mdss: display-subsystem@1a00000 { 839 compatible = "qcom,mdss"; 840 841 reg = <0x01a00000 0x1000>, 842 <0x01ab0000 0x1040>; 843 reg-names = "mdss_phys", 844 "vbif_phys"; 845 846 power-domains = <&gcc MDSS_GDSC>; 847 interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; 848 849 interrupt-controller; 850 #interrupt-cells = <1>; 851 852 clocks = <&gcc GCC_MDSS_AHB_CLK>, 853 <&gcc GCC_MDSS_AXI_CLK>, 854 <&gcc GCC_MDSS_VSYNC_CLK>, 855 <&gcc GCC_MDSS_MDP_CLK>; 856 clock-names = "iface", 857 "bus", 858 "vsync", 859 "core"; 860 861 resets = <&gcc GCC_MDSS_BCR>; 862 863 #address-cells = <1>; 864 #size-cells = <1>; 865 ranges; 866 867 status = "disabled"; 868 869 mdp: display-controller@1a01000 { 870 compatible = "qcom,msm8953-mdp5", "qcom,mdp5"; 871 reg = <0x01a01000 0x89000>; 872 reg-names = "mdp_phys"; 873 874 interrupt-parent = <&mdss>; 875 interrupts = <0>; 876 877 power-domains = <&gcc MDSS_GDSC>; 878 879 clocks = <&gcc GCC_MDSS_AHB_CLK>, 880 <&gcc GCC_MDSS_AXI_CLK>, 881 <&gcc GCC_MDSS_MDP_CLK>, 882 <&gcc GCC_MDSS_VSYNC_CLK>; 883 clock-names = "iface", 884 "bus", 885 "core", 886 "vsync"; 887 888 iommus = <&apps_iommu 0x15>; 889 890 ports { 891 #address-cells = <1>; 892 #size-cells = <0>; 893 894 port@0 { 895 reg = <0>; 896 mdp5_intf1_out: endpoint { 897 remote-endpoint = <&mdss_dsi0_in>; 898 }; 899 }; 900 901 port@1 { 902 reg = <1>; 903 mdp5_intf2_out: endpoint { 904 remote-endpoint = <&mdss_dsi1_in>; 905 }; 906 }; 907 }; 908 }; 909 910 mdss_dsi0: dsi@1a94000 { 911 compatible = "qcom,msm8953-dsi-ctrl", "qcom,mdss-dsi-ctrl"; 912 reg = <0x01a94000 0x400>; 913 reg-names = "dsi_ctrl"; 914 915 interrupt-parent = <&mdss>; 916 interrupts = <4>; 917 918 assigned-clocks = <&gcc BYTE0_CLK_SRC>, 919 <&gcc PCLK0_CLK_SRC>; 920 assigned-clock-parents = <&mdss_dsi0_phy 0>, 921 <&mdss_dsi0_phy 1>; 922 923 clocks = <&gcc GCC_MDSS_MDP_CLK>, 924 <&gcc GCC_MDSS_AHB_CLK>, 925 <&gcc GCC_MDSS_AXI_CLK>, 926 <&gcc GCC_MDSS_BYTE0_CLK>, 927 <&gcc GCC_MDSS_PCLK0_CLK>, 928 <&gcc GCC_MDSS_ESC0_CLK>; 929 clock-names = "mdp_core", 930 "iface", 931 "bus", 932 "byte", 933 "pixel", 934 "core"; 935 936 phys = <&mdss_dsi0_phy>; 937 938 #address-cells = <1>; 939 #size-cells = <0>; 940 941 status = "disabled"; 942 943 ports { 944 #address-cells = <1>; 945 #size-cells = <0>; 946 947 port@0 { 948 reg = <0>; 949 mdss_dsi0_in: endpoint { 950 remote-endpoint = <&mdp5_intf1_out>; 951 }; 952 }; 953 954 port@1 { 955 reg = <1>; 956 mdss_dsi0_out: endpoint { 957 }; 958 }; 959 }; 960 }; 961 962 mdss_dsi0_phy: phy@1a94400 { 963 compatible = "qcom,dsi-phy-14nm-8953"; 964 reg = <0x01a94400 0x100>, 965 <0x01a94500 0x300>, 966 <0x01a94800 0x188>; 967 reg-names = "dsi_phy", 968 "dsi_phy_lane", 969 "dsi_pll"; 970 971 #clock-cells = <1>; 972 #phy-cells = <0>; 973 974 clocks = <&gcc GCC_MDSS_AHB_CLK>, <&rpmcc RPM_SMD_XO_CLK_SRC>; 975 clock-names = "iface", "ref"; 976 977 status = "disabled"; 978 }; 979 980 mdss_dsi1: dsi@1a96000 { 981 compatible = "qcom,msm8953-dsi-ctrl", "qcom,mdss-dsi-ctrl"; 982 reg = <0x01a96000 0x400>; 983 reg-names = "dsi_ctrl"; 984 985 interrupt-parent = <&mdss>; 986 interrupts = <5>; 987 988 assigned-clocks = <&gcc BYTE1_CLK_SRC>, 989 <&gcc PCLK1_CLK_SRC>; 990 assigned-clock-parents = <&mdss_dsi1_phy 0>, 991 <&mdss_dsi1_phy 1>; 992 993 clocks = <&gcc GCC_MDSS_MDP_CLK>, 994 <&gcc GCC_MDSS_AHB_CLK>, 995 <&gcc GCC_MDSS_AXI_CLK>, 996 <&gcc GCC_MDSS_BYTE1_CLK>, 997 <&gcc GCC_MDSS_PCLK1_CLK>, 998 <&gcc GCC_MDSS_ESC1_CLK>; 999 clock-names = "mdp_core", 1000 "iface", 1001 "bus", 1002 "byte", 1003 "pixel", 1004 "core"; 1005 1006 phys = <&mdss_dsi1_phy>; 1007 1008 status = "disabled"; 1009 1010 ports { 1011 #address-cells = <1>; 1012 #size-cells = <0>; 1013 1014 port@0 { 1015 reg = <0>; 1016 mdss_dsi1_in: endpoint { 1017 remote-endpoint = <&mdp5_intf2_out>; 1018 }; 1019 }; 1020 1021 port@1 { 1022 reg = <1>; 1023 mdss_dsi1_out: endpoint { 1024 }; 1025 }; 1026 }; 1027 }; 1028 1029 mdss_dsi1_phy: phy@1a96400 { 1030 compatible = "qcom,dsi-phy-14nm-8953"; 1031 reg = <0x01a96400 0x100>, 1032 <0x01a96500 0x300>, 1033 <0x01a96800 0x188>; 1034 reg-names = "dsi_phy", 1035 "dsi_phy_lane", 1036 "dsi_pll"; 1037 1038 #clock-cells = <1>; 1039 #phy-cells = <0>; 1040 1041 clocks = <&gcc GCC_MDSS_AHB_CLK>, <&rpmcc RPM_SMD_XO_CLK_SRC>; 1042 clock-names = "iface", "ref"; 1043 1044 status = "disabled"; 1045 }; 1046 }; 1047 1048 gpu: gpu@1c00000 { 1049 compatible = "qcom,adreno-506.0", "qcom,adreno"; 1050 reg = <0x01c00000 0x40000>; 1051 reg-names = "kgsl_3d0_reg_memory"; 1052 interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; 1053 1054 clocks = <&gcc GCC_OXILI_GFX3D_CLK>, 1055 <&gcc GCC_OXILI_AHB_CLK>, 1056 <&gcc GCC_BIMC_GFX_CLK>, 1057 <&gcc GCC_BIMC_GPU_CLK>, 1058 <&gcc GCC_OXILI_TIMER_CLK>, 1059 <&gcc GCC_OXILI_AON_CLK>; 1060 clock-names = "core", 1061 "iface", 1062 "mem_iface", 1063 "alt_mem_iface", 1064 "rbbmtimer", 1065 "alwayson"; 1066 power-domains = <&gcc OXILI_GX_GDSC>; 1067 1068 iommus = <&gpu_iommu 0>; 1069 operating-points-v2 = <&gpu_opp_table>; 1070 1071 #cooling-cells = <2>; 1072 1073 status = "disabled"; 1074 1075 zap-shader { 1076 memory-region = <&zap_shader_region>; 1077 }; 1078 1079 gpu_opp_table: opp-table { 1080 compatible = "operating-points-v2"; 1081 1082 opp-19200000 { 1083 opp-hz = /bits/ 64 <19200000>; 1084 opp-supported-hw = <0xff>; 1085 required-opps = <&rpmpd_opp_min_svs>; 1086 }; 1087 1088 opp-133300000 { 1089 opp-hz = /bits/ 64 <133300000>; 1090 opp-supported-hw = <0xff>; 1091 required-opps = <&rpmpd_opp_min_svs>; 1092 }; 1093 1094 opp-216000000 { 1095 opp-hz = /bits/ 64 <216000000>; 1096 opp-supported-hw = <0xff>; 1097 required-opps = <&rpmpd_opp_low_svs>; 1098 }; 1099 1100 opp-320000000 { 1101 opp-hz = /bits/ 64 <320000000>; 1102 opp-supported-hw = <0xff>; 1103 required-opps = <&rpmpd_opp_svs>; 1104 }; 1105 1106 opp-400000000 { 1107 opp-hz = /bits/ 64 <400000000>; 1108 opp-supported-hw = <0xff>; 1109 required-opps = <&rpmpd_opp_svs_plus>; 1110 }; 1111 1112 opp-510000000 { 1113 opp-hz = /bits/ 64 <510000000>; 1114 opp-supported-hw = <0xff>; 1115 required-opps = <&rpmpd_opp_nom>; 1116 }; 1117 1118 opp-560000000 { 1119 opp-hz = /bits/ 64 <560000000>; 1120 opp-supported-hw = <0xff>; 1121 required-opps = <&rpmpd_opp_nom_plus>; 1122 }; 1123 1124 /* 1125 * This opp is only available on msm8953 and 1126 * sdm632, the max for sdm450 is 600MHz. 1127 */ 1128 opp-650000000 { 1129 opp-hz = /bits/ 64 <650000000>; 1130 opp-supported-hw = <0xff>; 1131 required-opps = <&rpmpd_opp_turbo>; 1132 }; 1133 }; 1134 }; 1135 1136 gpu_iommu: iommu@1c48000 { 1137 compatible = "qcom,msm8953-iommu", "qcom,msm-iommu-v2"; 1138 ranges = <0 0x01c48000 0x8000>; 1139 1140 clocks = <&gcc GCC_OXILI_AHB_CLK>, 1141 <&gcc GCC_BIMC_GFX_CLK>; 1142 clock-names = "iface", "bus"; 1143 1144 power-domains = <&gcc OXILI_CX_GDSC>; 1145 1146 qcom,iommu-secure-id = <18>; 1147 1148 #address-cells = <1>; 1149 #iommu-cells = <1>; 1150 #size-cells = <1>; 1151 1152 /* gfx3d_user */ 1153 iommu-ctx@0 { 1154 compatible = "qcom,msm-iommu-v2-ns"; 1155 reg = <0x0000 0x1000>; 1156 interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>; 1157 }; 1158 1159 /* gfx3d_secure */ 1160 iommu-ctx@2000 { 1161 compatible = "qcom,msm-iommu-v2-sec"; 1162 reg = <0x2000 0x1000>; 1163 interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>; 1164 }; 1165 }; 1166 1167 apps_iommu: iommu@1e20000 { 1168 compatible = "qcom,msm8953-iommu", "qcom,msm-iommu-v1"; 1169 ranges = <0 0x01e20000 0x20000>; 1170 1171 clocks = <&gcc GCC_SMMU_CFG_CLK>, 1172 <&gcc GCC_APSS_TCU_ASYNC_CLK>; 1173 clock-names = "iface", "bus"; 1174 1175 qcom,iommu-secure-id = <17>; 1176 1177 #address-cells = <1>; 1178 #iommu-cells = <1>; 1179 #size-cells = <1>; 1180 1181 /* VFE */ 1182 iommu-ctx@14000 { 1183 compatible = "qcom,msm-iommu-v1-ns"; 1184 reg = <0x14000 0x1000>; 1185 interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; 1186 }; 1187 1188 /* MDP_0 */ 1189 iommu-ctx@15000 { 1190 compatible = "qcom,msm-iommu-v1-ns"; 1191 reg = <0x15000 0x1000>; 1192 interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; 1193 }; 1194 1195 /* VENUS_NS */ 1196 iommu-ctx@16000 { 1197 compatible = "qcom,msm-iommu-v1-ns"; 1198 reg = <0x16000 0x1000>; 1199 interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; 1200 }; 1201 }; 1202 1203 spmi_bus: spmi@200f000 { 1204 compatible = "qcom,spmi-pmic-arb"; 1205 reg = <0x0200f000 0x1000>, 1206 <0x02400000 0x800000>, 1207 <0x02c00000 0x800000>, 1208 <0x03800000 0x200000>, 1209 <0x0200a000 0x2100>; 1210 reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; 1211 interrupt-names = "periph_irq"; 1212 interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; 1213 qcom,ee = <0>; 1214 qcom,channel = <0>; 1215 interrupt-controller; 1216 1217 #interrupt-cells = <4>; 1218 #address-cells = <2>; 1219 #size-cells = <0>; 1220 }; 1221 1222 mpss: remoteproc@4080000 { 1223 compatible = "qcom,msm8953-mss-pil"; 1224 reg = <0x04080000 0x100>, 1225 <0x04020000 0x040>; 1226 reg-names = "qdsp6", "rmb"; 1227 1228 interrupts-extended = <&intc GIC_SPI 24 IRQ_TYPE_EDGE_RISING>, 1229 <&smp2p_modem_in 0 IRQ_TYPE_EDGE_RISING>, 1230 <&smp2p_modem_in 1 IRQ_TYPE_EDGE_RISING>, 1231 <&smp2p_modem_in 2 IRQ_TYPE_EDGE_RISING>, 1232 <&smp2p_modem_in 3 IRQ_TYPE_EDGE_RISING>; 1233 interrupt-names = "wdog", "fatal", "ready", 1234 "handover", "stop-ack"; 1235 1236 power-domains = <&rpmpd MSM8953_VDDCX>, 1237 <&rpmpd MSM8953_VDDMX>, 1238 <&rpmpd MSM8953_VDDMD>; 1239 power-domain-names = "cx", "mx","mss"; 1240 1241 clocks = <&gcc GCC_MSS_CFG_AHB_CLK>, 1242 <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>, 1243 <&gcc GCC_BOOT_ROM_AHB_CLK>, 1244 <&rpmcc RPM_SMD_XO_CLK_SRC>; 1245 clock-names = "iface", "bus", "mem", "xo"; 1246 1247 qcom,smem-states = <&smp2p_modem_out 0>; 1248 qcom,smem-state-names = "stop"; 1249 1250 resets = <&gcc GCC_MSS_BCR>; 1251 reset-names = "mss_restart"; 1252 1253 qcom,halt-regs = <&tcsr 0x18000 0x19000 0x1a000>; 1254 1255 status = "disabled"; 1256 1257 mba { 1258 memory-region = <&mba_mem>; 1259 }; 1260 1261 mpss { 1262 memory-region = <&mpss_mem>; 1263 }; 1264 1265 smd-edge { 1266 interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>; 1267 1268 qcom,smd-edge = <0>; 1269 mboxes = <&apcs 12>; 1270 qcom,remote-pid = <1>; 1271 1272 label = "modem"; 1273 }; 1274 }; 1275 1276 usb3: usb@70f8800 { 1277 compatible = "qcom,msm8953-dwc3", "qcom,dwc3"; 1278 reg = <0x070f8800 0x400>; 1279 #address-cells = <1>; 1280 #size-cells = <1>; 1281 ranges; 1282 1283 interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>, 1284 <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, 1285 <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>; 1286 interrupt-names = "pwr_event", 1287 "qusb2_phy", 1288 "ss_phy_irq"; 1289 1290 clocks = <&gcc GCC_USB_PHY_CFG_AHB_CLK>, 1291 <&gcc GCC_USB30_MASTER_CLK>, 1292 <&gcc GCC_PCNOC_USB3_AXI_CLK>, 1293 <&gcc GCC_USB30_SLEEP_CLK>, 1294 <&gcc GCC_USB30_MOCK_UTMI_CLK>; 1295 clock-names = "cfg_noc", 1296 "core", 1297 "iface", 1298 "sleep", 1299 "mock_utmi"; 1300 1301 assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>, 1302 <&gcc GCC_USB30_MASTER_CLK>; 1303 assigned-clock-rates = <19200000>, <133330000>; 1304 1305 power-domains = <&gcc USB30_GDSC>; 1306 1307 qcom,select-utmi-as-pipe-clk; 1308 1309 status = "disabled"; 1310 1311 usb3_dwc3: usb@7000000 { 1312 compatible = "snps,dwc3"; 1313 reg = <0x07000000 0xcc00>; 1314 interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; 1315 phys = <&hsusb_phy>; 1316 phy-names = "usb2-phy"; 1317 1318 snps,usb2-gadget-lpm-disable; 1319 snps,dis-u1-entry-quirk; 1320 snps,dis-u2-entry-quirk; 1321 snps,is-utmi-l1-suspend; 1322 snps,hird-threshold = /bits/ 8 <0x00>; 1323 1324 maximum-speed = "high-speed"; 1325 1326 usb-role-switch; 1327 1328 ports { 1329 #address-cells = <1>; 1330 #size-cells = <0>; 1331 1332 port@0 { 1333 reg = <0>; 1334 1335 usb_dwc3_hs: endpoint { 1336 }; 1337 }; 1338 }; 1339 }; 1340 }; 1341 1342 sdhc_1: mmc@7824900 { 1343 compatible = "qcom,msm8953-sdhci", "qcom,sdhci-msm-v4"; 1344 1345 reg = <0x07824900 0x500>, <0x07824000 0x800>; 1346 reg-names = "hc", "core"; 1347 1348 interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, 1349 <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; 1350 interrupt-names = "hc_irq", "pwr_irq"; 1351 1352 clocks = <&gcc GCC_SDCC1_AHB_CLK>, 1353 <&gcc GCC_SDCC1_APPS_CLK>, 1354 <&rpmcc RPM_SMD_XO_CLK_SRC>; 1355 clock-names = "iface", "core", "xo"; 1356 1357 power-domains = <&rpmpd MSM8953_VDDCX>; 1358 operating-points-v2 = <&sdhc1_opp_table>; 1359 1360 pinctrl-names = "default", "sleep"; 1361 pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on &sdc1_rclk_on>; 1362 pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off &sdc1_rclk_off>; 1363 1364 mmc-hs400-1_8v; 1365 mmc-hs200-1_8v; 1366 mmc-ddr-1_8v; 1367 bus-width = <8>; 1368 non-removable; 1369 1370 status = "disabled"; 1371 1372 sdhc1_opp_table: opp-table-sdhc1 { 1373 compatible = "operating-points-v2"; 1374 1375 opp-25000000 { 1376 opp-hz = /bits/ 64 <25000000>; 1377 required-opps = <&rpmpd_opp_low_svs>; 1378 }; 1379 1380 opp-50000000 { 1381 opp-hz = /bits/ 64 <50000000>; 1382 required-opps = <&rpmpd_opp_svs>; 1383 }; 1384 1385 opp-100000000 { 1386 opp-hz = /bits/ 64 <100000000>; 1387 required-opps = <&rpmpd_opp_svs>; 1388 }; 1389 1390 opp-192000000 { 1391 opp-hz = /bits/ 64 <192000000>; 1392 required-opps = <&rpmpd_opp_nom>; 1393 }; 1394 1395 opp-384000000 { 1396 opp-hz = /bits/ 64 <384000000>; 1397 required-opps = <&rpmpd_opp_nom>; 1398 }; 1399 }; 1400 }; 1401 1402 sdhc_2: mmc@7864900 { 1403 compatible = "qcom,msm8953-sdhci", "qcom,sdhci-msm-v4"; 1404 1405 reg = <0x07864900 0x500>, <0x07864000 0x800>; 1406 reg-names = "hc", "core"; 1407 1408 interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, 1409 <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; 1410 interrupt-names = "hc_irq", "pwr_irq"; 1411 1412 clocks = <&gcc GCC_SDCC2_AHB_CLK>, 1413 <&gcc GCC_SDCC2_APPS_CLK>, 1414 <&rpmcc RPM_SMD_XO_CLK_SRC>; 1415 clock-names = "iface", "core", "xo"; 1416 1417 power-domains = <&rpmpd MSM8953_VDDCX>; 1418 operating-points-v2 = <&sdhc2_opp_table>; 1419 1420 pinctrl-names = "default", "sleep"; 1421 pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on>; 1422 pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>; 1423 1424 bus-width = <4>; 1425 1426 status = "disabled"; 1427 1428 sdhc2_opp_table: opp-table-sdhc2 { 1429 compatible = "operating-points-v2"; 1430 1431 opp-25000000 { 1432 opp-hz = /bits/ 64 <25000000>; 1433 required-opps = <&rpmpd_opp_low_svs>; 1434 }; 1435 1436 opp-50000000 { 1437 opp-hz = /bits/ 64 <50000000>; 1438 required-opps = <&rpmpd_opp_svs>; 1439 }; 1440 1441 opp-100000000 { 1442 opp-hz = /bits/ 64 <100000000>; 1443 required-opps = <&rpmpd_opp_svs>; 1444 }; 1445 1446 opp-177770000 { 1447 opp-hz = /bits/ 64 <177770000>; 1448 required-opps = <&rpmpd_opp_nom>; 1449 }; 1450 1451 opp-200000000 { 1452 opp-hz = /bits/ 64 <200000000>; 1453 required-opps = <&rpmpd_opp_nom>; 1454 }; 1455 }; 1456 }; 1457 1458 blsp1_dma: dma-controller@7884000 { 1459 compatible = "qcom,bam-v1.7.0"; 1460 reg = <0x07884000 0x1f000>; 1461 interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>; 1462 clocks = <&gcc GCC_BLSP1_AHB_CLK>; 1463 clock-names = "bam_clk"; 1464 num-channels = <12>; 1465 #dma-cells = <1>; 1466 qcom,ee = <0>; 1467 qcom,num-ees = <4>; 1468 qcom,controlled-remotely; 1469 }; 1470 1471 uart_0: serial@78af000 { 1472 compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; 1473 reg = <0x078af000 0x200>; 1474 interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; 1475 clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, 1476 <&gcc GCC_BLSP1_AHB_CLK>; 1477 clock-names = "core", "iface"; 1478 1479 status = "disabled"; 1480 }; 1481 1482 i2c_1: i2c@78b5000 { 1483 compatible = "qcom,i2c-qup-v2.2.1"; 1484 reg = <0x078b5000 0x600>; 1485 interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; 1486 clock-names = "core", "iface"; 1487 clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>, 1488 <&gcc GCC_BLSP1_AHB_CLK>; 1489 dmas = <&blsp1_dma 4>, <&blsp1_dma 5>; 1490 dma-names = "tx", "rx"; 1491 1492 pinctrl-names = "default", "sleep"; 1493 pinctrl-0 = <&i2c_1_default>; 1494 pinctrl-1 = <&i2c_1_sleep>; 1495 1496 #address-cells = <1>; 1497 #size-cells = <0>; 1498 1499 status = "disabled"; 1500 }; 1501 1502 i2c_2: i2c@78b6000 { 1503 compatible = "qcom,i2c-qup-v2.2.1"; 1504 reg = <0x078b6000 0x600>; 1505 interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; 1506 clock-names = "core", "iface"; 1507 clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, 1508 <&gcc GCC_BLSP1_AHB_CLK>; 1509 dmas = <&blsp1_dma 6>, <&blsp1_dma 7>; 1510 dma-names = "tx", "rx"; 1511 1512 pinctrl-names = "default", "sleep"; 1513 pinctrl-0 = <&i2c_2_default>; 1514 pinctrl-1 = <&i2c_2_sleep>; 1515 1516 #address-cells = <1>; 1517 #size-cells = <0>; 1518 1519 status = "disabled"; 1520 }; 1521 1522 i2c_3: i2c@78b7000 { 1523 compatible = "qcom,i2c-qup-v2.2.1"; 1524 reg = <0x078b7000 0x600>; 1525 interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; 1526 clock-names = "core", "iface"; 1527 clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, 1528 <&gcc GCC_BLSP1_AHB_CLK>; 1529 dmas = <&blsp1_dma 8>, <&blsp1_dma 9>; 1530 dma-names = "tx", "rx"; 1531 1532 pinctrl-names = "default", "sleep"; 1533 pinctrl-0 = <&i2c_3_default>; 1534 pinctrl-1 = <&i2c_3_sleep>; 1535 1536 #address-cells = <1>; 1537 #size-cells = <0>; 1538 1539 status = "disabled"; 1540 }; 1541 1542 spi_3: spi@78b7000 { 1543 compatible = "qcom,spi-qup-v2.2.1"; 1544 reg = <0x078b7000 0x600>; 1545 interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; 1546 clock-names = "core", "iface"; 1547 clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, 1548 <&gcc GCC_BLSP1_AHB_CLK>; 1549 dmas = <&blsp1_dma 8>, <&blsp1_dma 9>; 1550 dma-names = "tx", "rx"; 1551 1552 pinctrl-names = "default", "sleep"; 1553 pinctrl-0 = <&spi_3_default>; 1554 pinctrl-1 = <&spi_3_sleep>; 1555 1556 #address-cells = <1>; 1557 #size-cells = <0>; 1558 1559 status = "disabled"; 1560 }; 1561 1562 i2c_4: i2c@78b8000 { 1563 compatible = "qcom,i2c-qup-v2.2.1"; 1564 reg = <0x078b8000 0x600>; 1565 interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; 1566 clock-names = "core", "iface"; 1567 clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>, 1568 <&gcc GCC_BLSP1_AHB_CLK>; 1569 dmas = <&blsp2_dma 10>, <&blsp2_dma 11>; 1570 dma-names = "tx", "rx"; 1571 1572 pinctrl-names = "default", "sleep"; 1573 pinctrl-0 = <&i2c_4_default>; 1574 pinctrl-1 = <&i2c_4_sleep>; 1575 1576 #address-cells = <1>; 1577 #size-cells = <0>; 1578 1579 status = "disabled"; 1580 }; 1581 1582 blsp2_dma: dma-controller@7ac4000 { 1583 compatible = "qcom,bam-v1.7.0"; 1584 reg = <0x07ac4000 0x1f000>; 1585 interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>; 1586 clocks = <&gcc GCC_BLSP2_AHB_CLK>; 1587 clock-names = "bam_clk"; 1588 num-channels = <12>; 1589 #dma-cells = <1>; 1590 qcom,ee = <0>; 1591 qcom,num-ees = <4>; 1592 qcom,controlled-remotely; 1593 }; 1594 1595 i2c_5: i2c@7af5000 { 1596 compatible = "qcom,i2c-qup-v2.2.1"; 1597 reg = <0x07af5000 0x600>; 1598 interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>; 1599 clock-names = "core", "iface"; 1600 clocks = <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>, 1601 <&gcc GCC_BLSP2_AHB_CLK>; 1602 dmas = <&blsp2_dma 4>, <&blsp2_dma 5>; 1603 dma-names = "tx", "rx"; 1604 1605 pinctrl-names = "default", "sleep"; 1606 pinctrl-0 = <&i2c_5_default>; 1607 pinctrl-1 = <&i2c_5_sleep>; 1608 1609 #address-cells = <1>; 1610 #size-cells = <0>; 1611 1612 status = "disabled"; 1613 }; 1614 1615 spi_5: spi@7af5000 { 1616 compatible = "qcom,spi-qup-v2.2.1"; 1617 reg = <0x07af5000 0x600>; 1618 interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>; 1619 clock-names = "core", "iface"; 1620 clocks = <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>, 1621 <&gcc GCC_BLSP2_AHB_CLK>; 1622 dmas = <&blsp2_dma 4>, <&blsp2_dma 5>; 1623 dma-names = "tx", "rx"; 1624 1625 pinctrl-names = "default", "sleep"; 1626 pinctrl-0 = <&spi_5_default>; 1627 pinctrl-1 = <&spi_5_sleep>; 1628 1629 #address-cells = <1>; 1630 #size-cells = <0>; 1631 1632 status = "disabled"; 1633 }; 1634 1635 i2c_6: i2c@7af6000 { 1636 compatible = "qcom,i2c-qup-v2.2.1"; 1637 reg = <0x07af6000 0x600>; 1638 interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>; 1639 clock-names = "core", "iface"; 1640 clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>, 1641 <&gcc GCC_BLSP2_AHB_CLK>; 1642 dmas = <&blsp2_dma 6>, <&blsp2_dma 7>; 1643 dma-names = "tx", "rx"; 1644 1645 pinctrl-names = "default", "sleep"; 1646 pinctrl-0 = <&i2c_6_default>; 1647 pinctrl-1 = <&i2c_6_sleep>; 1648 1649 #address-cells = <1>; 1650 #size-cells = <0>; 1651 1652 status = "disabled"; 1653 }; 1654 1655 spi_6: spi@7af6000 { 1656 compatible = "qcom,spi-qup-v2.2.1"; 1657 reg = <0x07af6000 0x600>; 1658 interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>; 1659 clock-names = "core", "iface"; 1660 clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>, 1661 <&gcc GCC_BLSP2_AHB_CLK>; 1662 dmas = <&blsp2_dma 6>, <&blsp2_dma 7>; 1663 dma-names = "tx", "rx"; 1664 1665 pinctrl-names = "default", "sleep"; 1666 pinctrl-0 = <&spi_6_default>; 1667 pinctrl-1 = <&spi_6_sleep>; 1668 1669 #address-cells = <1>; 1670 #size-cells = <0>; 1671 1672 status = "disabled"; 1673 }; 1674 1675 i2c_7: i2c@7af7000 { 1676 compatible = "qcom,i2c-qup-v2.2.1"; 1677 reg = <0x07af7000 0x600>; 1678 interrupts = <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH>; 1679 clock-names = "core", "iface"; 1680 clocks = <&gcc GCC_BLSP2_QUP3_I2C_APPS_CLK>, 1681 <&gcc GCC_BLSP2_AHB_CLK>; 1682 dmas = <&blsp2_dma 8>, <&blsp2_dma 9>; 1683 dma-names = "tx", "rx"; 1684 1685 pinctrl-names = "default", "sleep"; 1686 pinctrl-0 = <&i2c_7_default>; 1687 pinctrl-1 = <&i2c_7_sleep>; 1688 1689 #address-cells = <1>; 1690 #size-cells = <0>; 1691 1692 status = "disabled"; 1693 }; 1694 1695 i2c_8: i2c@7af8000 { 1696 compatible = "qcom,i2c-qup-v2.2.1"; 1697 reg = <0x07af8000 0x600>; 1698 interrupts = <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>; 1699 clock-names = "core", "iface"; 1700 clocks = <&gcc GCC_BLSP2_QUP4_I2C_APPS_CLK>, 1701 <&gcc GCC_BLSP2_AHB_CLK>; 1702 dmas = <&blsp2_dma 10>, <&blsp2_dma 11>; 1703 dma-names = "tx", "rx"; 1704 1705 pinctrl-names = "default", "sleep"; 1706 pinctrl-0 = <&i2c_8_default>; 1707 pinctrl-1 = <&i2c_8_sleep>; 1708 1709 #address-cells = <1>; 1710 #size-cells = <0>; 1711 1712 status = "disabled"; 1713 }; 1714 1715 wcnss: remoteproc@a204000 { 1716 compatible = "qcom,pronto-v3-pil", "qcom,pronto"; 1717 reg = <0x0a204000 0x2000>, <0x0a202000 0x1000>, <0x0a21b000 0x3000>; 1718 reg-names = "ccu", "dxe", "pmu"; 1719 1720 memory-region = <&wcnss_fw_mem>; 1721 1722 interrupts-extended = <&intc GIC_SPI 149 IRQ_TYPE_EDGE_RISING>, 1723 <&smp2p_wcnss_in 0 IRQ_TYPE_EDGE_RISING>, 1724 <&smp2p_wcnss_in 1 IRQ_TYPE_EDGE_RISING>, 1725 <&smp2p_wcnss_in 2 IRQ_TYPE_EDGE_RISING>, 1726 <&smp2p_wcnss_in 3 IRQ_TYPE_EDGE_RISING>; 1727 interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack"; 1728 1729 power-domains = <&rpmpd MSM8953_VDDCX>, 1730 <&rpmpd MSM8953_VDDMX>; 1731 power-domain-names = "cx", "mx"; 1732 1733 qcom,smem-states = <&smp2p_wcnss_out 0>; 1734 qcom,smem-state-names = "stop"; 1735 1736 pinctrl-names = "default"; 1737 pinctrl-0 = <&wcnss_pin_a>; 1738 1739 status = "disabled"; 1740 1741 wcnss_iris: iris { 1742 /* Separate chip, compatible is board-specific */ 1743 clocks = <&rpmcc RPM_SMD_RF_CLK2>; 1744 clock-names = "xo"; 1745 }; 1746 1747 smd-edge { 1748 interrupts = <GIC_SPI 142 IRQ_TYPE_EDGE_RISING>; 1749 1750 mboxes = <&apcs 17>; 1751 qcom,smd-edge = <6>; 1752 qcom,remote-pid = <4>; 1753 1754 label = "pronto"; 1755 1756 wcnss_ctrl: wcnss { 1757 compatible = "qcom,wcnss"; 1758 qcom,smd-channels = "WCNSS_CTRL"; 1759 1760 qcom,mmio = <&wcnss>; 1761 1762 wcnss_bt: bluetooth { 1763 compatible = "qcom,wcnss-bt"; 1764 }; 1765 1766 wcnss_wifi: wifi { 1767 compatible = "qcom,wcnss-wlan"; 1768 1769 interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, 1770 <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>; 1771 interrupt-names = "tx", "rx"; 1772 1773 qcom,smem-states = <&apps_smsm 10>, <&apps_smsm 9>; 1774 qcom,smem-state-names = "tx-enable", 1775 "tx-rings-empty"; 1776 }; 1777 }; 1778 }; 1779 }; 1780 1781 intc: interrupt-controller@b000000 { 1782 compatible = "qcom,msm-qgic2"; 1783 interrupt-controller; 1784 #interrupt-cells = <3>; 1785 reg = <0x0b000000 0x1000>, <0x0b002000 0x1000>; 1786 }; 1787 1788 apcs: mailbox@b011000 { 1789 compatible = "qcom,msm8953-apcs-kpss-global", "syscon"; 1790 reg = <0x0b011000 0x1000>; 1791 #mbox-cells = <1>; 1792 }; 1793 1794 timer@b120000 { 1795 compatible = "arm,armv7-timer-mem"; 1796 reg = <0x0b120000 0x1000>; 1797 #address-cells = <1>; 1798 #size-cells = <1>; 1799 ranges; 1800 1801 frame@b121000 { 1802 frame-number = <0>; 1803 interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, 1804 <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; 1805 reg = <0x0b121000 0x1000>, 1806 <0x0b122000 0x1000>; 1807 }; 1808 1809 frame@b123000 { 1810 frame-number = <1>; 1811 interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; 1812 reg = <0x0b123000 0x1000>; 1813 status = "disabled"; 1814 }; 1815 1816 frame@b124000 { 1817 frame-number = <2>; 1818 interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; 1819 reg = <0x0b124000 0x1000>; 1820 status = "disabled"; 1821 }; 1822 1823 frame@b125000 { 1824 frame-number = <3>; 1825 interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; 1826 reg = <0x0b125000 0x1000>; 1827 status = "disabled"; 1828 }; 1829 1830 frame@b126000 { 1831 frame-number = <4>; 1832 interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; 1833 reg = <0x0b126000 0x1000>; 1834 status = "disabled"; 1835 }; 1836 1837 frame@b127000 { 1838 frame-number = <5>; 1839 interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; 1840 reg = <0x0b127000 0x1000>; 1841 status = "disabled"; 1842 }; 1843 1844 frame@b128000 { 1845 frame-number = <6>; 1846 interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; 1847 reg = <0x0b128000 0x1000>; 1848 status = "disabled"; 1849 }; 1850 }; 1851 1852 lpass: remoteproc@c200000 { 1853 compatible = "qcom,msm8953-adsp-pil"; 1854 reg = <0x0c200000 0x100>; 1855 1856 interrupts-extended = <&intc 0 293 IRQ_TYPE_EDGE_RISING>, 1857 <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>, 1858 <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>, 1859 <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>, 1860 <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>; 1861 interrupt-names = "wdog", "fatal", "ready", 1862 "handover", "stop-ack"; 1863 clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>; 1864 clock-names = "xo"; 1865 1866 power-domains = <&rpmpd MSM8953_VDDCX>; 1867 power-domain-names = "cx"; 1868 1869 memory-region = <&adsp_fw_mem>; 1870 1871 qcom,smem-states = <&smp2p_adsp_out 0>; 1872 qcom,smem-state-names = "stop"; 1873 1874 status = "disabled"; 1875 1876 smd-edge { 1877 interrupts = <GIC_SPI 289 IRQ_TYPE_EDGE_RISING>; 1878 1879 label = "lpass"; 1880 mboxes = <&apcs 8>; 1881 qcom,smd-edge = <1>; 1882 qcom,remote-pid = <2>; 1883 1884 apr { 1885 compatible = "qcom,apr-v2"; 1886 qcom,smd-channels = "apr_audio_svc"; 1887 qcom,domain = <APR_DOMAIN_ADSP>; 1888 #address-cells = <1>; 1889 #size-cells = <0>; 1890 1891 q6core: service@3 { 1892 reg = <APR_SVC_ADSP_CORE>; 1893 compatible = "qcom,q6core"; 1894 }; 1895 1896 q6afe: service@4 { 1897 compatible = "qcom,q6afe"; 1898 reg = <APR_SVC_AFE>; 1899 q6afedai: dais { 1900 compatible = "qcom,q6afe-dais"; 1901 #address-cells = <1>; 1902 #size-cells = <0>; 1903 #sound-dai-cells = <1>; 1904 1905 dai@16 { 1906 reg = <PRIMARY_MI2S_RX>; 1907 qcom,sd-lines = <0 1>; 1908 }; 1909 dai@20 { 1910 reg = <TERTIARY_MI2S_TX>; 1911 qcom,sd-lines = <0 1>; 1912 }; 1913 dai@127 { 1914 reg = <QUINARY_MI2S_RX>; 1915 qcom,sd-lines = <0>; 1916 }; 1917 }; 1918 1919 q6afecc: clock-controller { 1920 compatible = "qcom,q6afe-clocks"; 1921 #clock-cells = <2>; 1922 }; 1923 }; 1924 1925 q6asm: service@7 { 1926 compatible = "qcom,q6asm"; 1927 reg = <APR_SVC_ASM>; 1928 q6asmdai: dais { 1929 compatible = "qcom,q6asm-dais"; 1930 #address-cells = <1>; 1931 #size-cells = <0>; 1932 #sound-dai-cells = <1>; 1933 1934 dai@0 { 1935 reg = <0>; 1936 direction = <Q6ASM_DAI_RX>; 1937 }; 1938 dai@1 { 1939 reg = <1>; 1940 direction = <Q6ASM_DAI_TX>; 1941 }; 1942 dai@2 { 1943 reg = <2>; 1944 direction = <Q6ASM_DAI_RX>; 1945 }; 1946 dai@3 { 1947 reg = <3>; 1948 direction = <Q6ASM_DAI_RX>; 1949 is-compress-dai; 1950 }; 1951 }; 1952 }; 1953 1954 q6adm: service@8 { 1955 compatible = "qcom,q6adm"; 1956 reg = <APR_SVC_ADM>; 1957 q6routing: routing { 1958 compatible = "qcom,q6adm-routing"; 1959 #sound-dai-cells = <0>; 1960 }; 1961 }; 1962 }; 1963 }; 1964 }; 1965 }; 1966 1967 thermal-zones { 1968 cpu0-thermal { 1969 polling-delay-passive = <250>; 1970 1971 thermal-sensors = <&tsens0 9>; 1972 1973 trips { 1974 cpu0_alert: trip-point0 { 1975 temperature = <80000>; 1976 hysteresis = <2000>; 1977 type = "passive"; 1978 }; 1979 cpu0_crit: crit { 1980 temperature = <100000>; 1981 hysteresis = <2000>; 1982 type = "critical"; 1983 }; 1984 }; 1985 cooling-maps { 1986 map0 { 1987 trip = <&cpu0_alert>; 1988 cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; 1989 }; 1990 }; 1991 }; 1992 cpu1-thermal { 1993 polling-delay-passive = <250>; 1994 1995 thermal-sensors = <&tsens0 10>; 1996 1997 trips { 1998 cpu1_alert: trip-point0 { 1999 temperature = <80000>; 2000 hysteresis = <2000>; 2001 type = "passive"; 2002 }; 2003 cpu1_crit: crit { 2004 temperature = <100000>; 2005 hysteresis = <2000>; 2006 type = "critical"; 2007 }; 2008 }; 2009 cooling-maps { 2010 map0 { 2011 trip = <&cpu1_alert>; 2012 cooling-device = <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; 2013 }; 2014 }; 2015 }; 2016 cpu2-thermal { 2017 polling-delay-passive = <250>; 2018 2019 thermal-sensors = <&tsens0 11>; 2020 2021 trips { 2022 cpu2_alert: trip-point0 { 2023 temperature = <80000>; 2024 hysteresis = <2000>; 2025 type = "passive"; 2026 }; 2027 cpu2_crit: crit { 2028 temperature = <100000>; 2029 hysteresis = <2000>; 2030 type = "critical"; 2031 }; 2032 }; 2033 cooling-maps { 2034 map0 { 2035 trip = <&cpu2_alert>; 2036 cooling-device = <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; 2037 }; 2038 }; 2039 }; 2040 cpu3-thermal { 2041 polling-delay-passive = <250>; 2042 2043 thermal-sensors = <&tsens0 12>; 2044 2045 trips { 2046 cpu3_alert: trip-point0 { 2047 temperature = <80000>; 2048 hysteresis = <2000>; 2049 type = "passive"; 2050 }; 2051 cpu3_crit: crit { 2052 temperature = <100000>; 2053 hysteresis = <2000>; 2054 type = "critical"; 2055 }; 2056 }; 2057 cooling-maps { 2058 map0 { 2059 trip = <&cpu3_alert>; 2060 cooling-device = <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; 2061 }; 2062 }; 2063 }; 2064 cpu4-thermal { 2065 polling-delay-passive = <250>; 2066 thermal-sensors = <&tsens0 4>; 2067 trips { 2068 cpu4_alert: trip-point0 { 2069 temperature = <80000>; 2070 hysteresis = <2000>; 2071 type = "passive"; 2072 }; 2073 cpu4_crit: crit { 2074 temperature = <100000>; 2075 hysteresis = <2000>; 2076 type = "critical"; 2077 }; 2078 }; 2079 cooling-maps { 2080 map0 { 2081 trip = <&cpu4_alert>; 2082 cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; 2083 }; 2084 }; 2085 }; 2086 cpu5-thermal { 2087 polling-delay-passive = <250>; 2088 thermal-sensors = <&tsens0 5>; 2089 trips { 2090 cpu5_alert: trip-point0 { 2091 temperature = <80000>; 2092 hysteresis = <2000>; 2093 type = "passive"; 2094 }; 2095 cpu5_crit: crit { 2096 temperature = <100000>; 2097 hysteresis = <2000>; 2098 type = "critical"; 2099 }; 2100 }; 2101 cooling-maps { 2102 map0 { 2103 trip = <&cpu5_alert>; 2104 cooling-device = <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; 2105 }; 2106 }; 2107 }; 2108 cpu6-thermal { 2109 polling-delay-passive = <250>; 2110 thermal-sensors = <&tsens0 6>; 2111 trips { 2112 cpu6_alert: trip-point0 { 2113 temperature = <80000>; 2114 hysteresis = <2000>; 2115 type = "passive"; 2116 }; 2117 cpu6_crit: crit { 2118 temperature = <100000>; 2119 hysteresis = <2000>; 2120 type = "critical"; 2121 }; 2122 }; 2123 cooling-maps { 2124 map0 { 2125 trip = <&cpu6_alert>; 2126 cooling-device = <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; 2127 }; 2128 }; 2129 }; 2130 cpu7-thermal { 2131 polling-delay-passive = <250>; 2132 thermal-sensors = <&tsens0 7>; 2133 trips { 2134 cpu7_alert: trip-point0 { 2135 temperature = <80000>; 2136 hysteresis = <2000>; 2137 type = "passive"; 2138 }; 2139 cpu7_crit: crit { 2140 temperature = <100000>; 2141 hysteresis = <2000>; 2142 type = "critical"; 2143 }; 2144 }; 2145 cooling-maps { 2146 map0 { 2147 trip = <&cpu7_alert>; 2148 cooling-device = <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; 2149 }; 2150 }; 2151 }; 2152 2153 gpu-thermal { 2154 polling-delay-passive = <250>; 2155 thermal-sensors = <&tsens0 15>; 2156 2157 trips { 2158 gpu_alert: trip-point0 { 2159 temperature = <70000>; 2160 hysteresis = <2000>; 2161 type = "passive"; 2162 }; 2163 2164 gpu_crit: crit { 2165 temperature = <90000>; 2166 hysteresis = <2000>; 2167 type = "critical"; 2168 }; 2169 }; 2170 2171 cooling-maps { 2172 map0 { 2173 trip = <&gpu_alert>; 2174 cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; 2175 }; 2176 }; 2177 }; 2178 }; 2179 2180 timer { 2181 compatible = "arm,armv8-timer"; 2182 interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, 2183 <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, 2184 <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, 2185 <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; 2186 }; 2187}; 2188