1// SPDX-License-Identifier: GPL-2.0-only 2 3/dts-v1/; 4 5#include "msm8916-wingtech-wt865x8.dtsi" 6 7/ { 8 model = "Lenovo A6010 (Wingtech WT86528)"; 9 compatible = "wingtech,wt86528", "qcom,msm8916"; 10 chassis-type = "handset"; 11 12 /* left AW8736 */ 13 speaker_amp_left: audio-amplifier-left { 14 compatible = "awinic,aw8738"; 15 16 pinctrl-0 = <&spk_ext_pa_left_default>; 17 pinctrl-names = "default"; 18 19 mode-gpios = <&tlmm 119 GPIO_ACTIVE_HIGH>; 20 sound-name-prefix = "Speaker Amp L"; 21 awinic,mode = <3>; 22 }; 23 24 /* right AW8736 */ 25 speaker_amp_right: audio-amplifier-right { 26 compatible = "awinic,aw8738"; 27 28 pinctrl-0 = <&spk_ext_pa_right_default>; 29 pinctrl-names = "default"; 30 31 mode-gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>; 32 sound-name-prefix = "Speaker Amp R"; 33 awinic,mode = <3>; 34 }; 35 36 gpio-leds { 37 compatible = "gpio-leds"; 38 39 pinctrl-0 = <&gpio_leds_default>; 40 pinctrl-names = "default"; 41 42 led-0 { 43 gpios = <&tlmm 16 GPIO_ACTIVE_LOW>; 44 label = "red"; 45 default-state = "off"; 46 retain-state-suspended; 47 }; 48 49 led-1 { 50 gpios = <&tlmm 17 GPIO_ACTIVE_HIGH>; 51 label = "green"; 52 default-state = "off"; 53 retain-state-suspended; 54 }; 55 }; 56 57 usb_id: usb-id { 58 compatible = "linux,extcon-usb-gpio"; 59 id-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>; 60 pinctrl-0 = <&usb_id_default>; 61 pinctrl-names = "default"; 62 }; 63}; 64 65&blsp_i2c2 { 66 magnetometer@c { 67 compatible = "asahi-kasei,ak09911"; 68 reg = <0x0c>; 69 70 vdd-supply = <&pm8916_l17>; 71 vid-supply = <&pm8916_l6>; 72 }; 73 74 imu@68 { 75 compatible = "invensense,mpu6880"; 76 reg = <0x68>; 77 78 interrupts-extended = <&tlmm 115 IRQ_TYPE_EDGE_RISING>; 79 80 vdd-supply = <&pm8916_l17>; 81 vddio-supply = <&pm8916_l6>; 82 83 pinctrl-0 = <&imu_default>; 84 pinctrl-names = "default"; 85 86 mount-matrix = "1", "0", "0", 87 "0", "-1", "0", 88 "0", "0", "1"; 89 }; 90}; 91 92&pm8916_codec { 93 qcom,micbias1-ext-cap; 94}; 95 96&sound { 97 model = "wt86528"; 98 widgets = "Speaker", "Speaker", 99 "Headphone", "Headphones"; 100 pin-switches = "Speaker", "Headphones"; 101 audio-routing = "Speaker", "Speaker Amp L OUT", 102 "Speaker", "Speaker Amp R OUT", 103 "Speaker Amp L IN", "HPH_L", 104 "Speaker Amp R IN", "HPH_R", 105 "Headphones", "Headphones Switch OUTL", 106 "Headphones", "Headphones Switch OUTR", 107 "Headphones Switch INL", "HPH_L", 108 "Headphones Switch INR", "HPH_R", 109 "AMIC1", "MIC BIAS External1", 110 "AMIC2", "MIC BIAS Internal2", 111 "AMIC3", "MIC BIAS External1"; 112 aux-devs = <&speaker_amp_left>, <&speaker_amp_right>, <&headphones_switch>; 113}; 114 115&usb { 116 extcon = <&usb_id>, <&usb_id>; 117}; 118 119&usb_hs_phy { 120 extcon = <&usb_id>; 121}; 122 123&tlmm { 124 gpio_leds_default: gpio-leds-default-state { 125 pins = "gpio16", "gpio17"; 126 function = "gpio"; 127 drive-strength = <2>; 128 bias-disable; 129 }; 130 131 imu_default: imu-default-state { 132 pins = "gpio115"; 133 function = "gpio"; 134 drive-strength = <2>; 135 bias-disable; 136 }; 137 138 spk_ext_pa_left_default: spk-ext-pa-left-default-state { 139 pins = "gpio119"; 140 function = "gpio"; 141 drive-strength = <2>; 142 bias-disable; 143 }; 144 145 spk_ext_pa_right_default: spk-ext-pa-right-default-state { 146 pins = "gpio121"; 147 function = "gpio"; 148 drive-strength = <2>; 149 bias-disable; 150 }; 151 152 usb_id_default: usb-id-default-state { 153 pins = "gpio110"; 154 function = "gpio"; 155 drive-strength = <8>; 156 bias-pull-up; 157 }; 158}; 159