xref: /linux/arch/arm64/boot/dts/qcom/msm8916-ufi.dtsi (revision 73aea586d6c58f55799f6130e19321ff7b574c3d) 
1// SPDX-License-Identifier: GPL-2.0-only
2
3#include "msm8916-pm8916.dtsi"
4
5#include <dt-bindings/gpio/gpio.h>
6#include <dt-bindings/leds/common.h>
7
8/ {
9	chassis-type = "embedded";
10
11	aliases {
12		mmc0 = &sdhc_1; /* eMMC */
13		serial0 = &blsp_uart2;
14	};
15
16	chosen {
17		stdout-path = "serial0";
18	};
19
20	gpio-keys {
21		compatible = "gpio-keys";
22
23		pinctrl-0 = <&button_default>;
24		pinctrl-names = "default";
25
26		label = "GPIO Buttons";
27
28		/* GPIO is board-specific */
29		button_restart: button-restart {
30			label = "Restart";
31			linux,code = <KEY_RESTART>;
32		};
33	};
34
35	leds {
36		compatible = "gpio-leds";
37
38		pinctrl-0 = <&gpio_leds_default>;
39		pinctrl-names = "default";
40
41		/*
42		 * GPIOs are board-specific.
43		 * Functions and default-states defined here are fallbacks.
44		 * Feel free to override them if your board is different.
45		 */
46		led_r: led-r {
47			color = <LED_COLOR_ID_RED>;
48			default-state = "on";
49			function = LED_FUNCTION_POWER;
50		};
51
52		led_g: led-g {
53			color = <LED_COLOR_ID_GREEN>;
54			default-state = "off";
55			function = LED_FUNCTION_WLAN;
56		};
57
58		led_b: led-b {
59			color = <LED_COLOR_ID_BLUE>;
60			default-state = "off";
61			function = LED_FUNCTION_WAN;
62		};
63	};
64};
65
66&bam_dmux {
67	status = "okay";
68};
69
70&bam_dmux_dma {
71	status = "okay";
72};
73
74&blsp_uart2 {
75	status = "okay";
76};
77
78/* Remove &mdss_dsi0_phy from clocks to make sure that gcc probes with display disabled */
79&gcc {
80	clocks = <&xo_board>, <&sleep_clk>, <0>, <0>, <0>, <0>, <0>;
81};
82
83&mba_mem {
84	status = "okay";
85};
86
87&mpss {
88	status = "okay";
89};
90
91&mpss_mem {
92	reg = <0x0 0x86800000 0x0 0x5500000>;
93	status = "okay";
94};
95
96&pm8916_usbin {
97	status = "okay";
98};
99
100&sdhc_1 {
101	status = "okay";
102};
103
104&usb {
105	extcon = <&pm8916_usbin>;
106	usb-role-switch;
107
108	status = "okay";
109};
110
111&usb_hs_phy {
112	extcon = <&pm8916_usbin>;
113};
114
115&venus {
116	status = "okay";
117};
118
119&venus_mem {
120	status = "okay";
121};
122
123&wcnss {
124	status = "okay";
125};
126
127&wcnss_iris {
128	compatible = "qcom,wcn3620";
129};
130
131&wcnss_mem {
132	status = "okay";
133};
134
135&tlmm {
136	/* pins are board-specific */
137	button_default: button-default-state {
138		function = "gpio";
139		drive-strength = <2>;
140	};
141
142	gpio_leds_default: gpio-leds-default-state {
143		function = "gpio";
144		drive-strength = <2>;
145		bias-disable;
146	};
147};
148