1// SPDX-License-Identifier: GPL-2.0-only 2 3#include "msm8916-pm8916.dtsi" 4 5#include <dt-bindings/gpio/gpio.h> 6#include <dt-bindings/leds/common.h> 7 8/ { 9 chassis-type = "embedded"; 10 11 aliases { 12 mmc0 = &sdhc_1; /* eMMC */ 13 serial0 = &blsp_uart2; 14 }; 15 16 chosen { 17 stdout-path = "serial0"; 18 }; 19 20 gpio-keys { 21 compatible = "gpio-keys"; 22 23 pinctrl-0 = <&button_default>; 24 pinctrl-names = "default"; 25 26 label = "GPIO Buttons"; 27 28 /* GPIO is board-specific */ 29 button_restart: button-restart { 30 label = "Restart"; 31 linux,code = <KEY_RESTART>; 32 }; 33 }; 34 35 leds { 36 compatible = "gpio-leds"; 37 38 pinctrl-0 = <&gpio_leds_default>; 39 pinctrl-names = "default"; 40 41 /* 42 * GPIOs are board-specific. 43 * Functions and default-states defined here are fallbacks. 44 * Feel free to override them if your board is different. 45 */ 46 led_r: led-r { 47 color = <LED_COLOR_ID_RED>; 48 default-state = "on"; 49 function = LED_FUNCTION_POWER; 50 }; 51 52 led_g: led-g { 53 color = <LED_COLOR_ID_GREEN>; 54 default-state = "off"; 55 function = LED_FUNCTION_WLAN; 56 }; 57 58 led_b: led-b { 59 color = <LED_COLOR_ID_BLUE>; 60 default-state = "off"; 61 function = LED_FUNCTION_WAN; 62 }; 63 }; 64}; 65 66&bam_dmux { 67 status = "okay"; 68}; 69 70&bam_dmux_dma { 71 status = "okay"; 72}; 73 74&blsp_uart2 { 75 status = "okay"; 76}; 77 78/* Remove &mdss_dsi0_phy from clocks to make sure that gcc probes with display disabled */ 79&gcc { 80 clocks = <&xo_board>, <&sleep_clk>, <0>, <0>, <0>, <0>, <0>; 81}; 82 83&mba_mem { 84 status = "okay"; 85}; 86 87&mpss { 88 status = "okay"; 89}; 90 91&mpss_mem { 92 reg = <0x0 0x86800000 0x0 0x5500000>; 93 status = "okay"; 94}; 95 96&pm8916_usbin { 97 status = "okay"; 98}; 99 100&sdhc_1 { 101 status = "okay"; 102}; 103 104&usb { 105 extcon = <&pm8916_usbin>; 106 usb-role-switch; 107 108 status = "okay"; 109}; 110 111&usb_hs_phy { 112 extcon = <&pm8916_usbin>; 113}; 114 115&venus { 116 status = "okay"; 117}; 118 119&venus_mem { 120 status = "okay"; 121}; 122 123&wcnss { 124 status = "okay"; 125}; 126 127&wcnss_iris { 128 compatible = "qcom,wcn3620"; 129}; 130 131&wcnss_mem { 132 status = "okay"; 133}; 134 135&tlmm { 136 /* pins are board-specific */ 137 button_default: button-default-state { 138 function = "gpio"; 139 drive-strength = <2>; 140 }; 141 142 gpio_leds_default: gpio-leds-default-state { 143 function = "gpio"; 144 drive-strength = <2>; 145 bias-disable; 146 }; 147}; 148