xref: /linux/arch/arm64/boot/dts/qcom/msm8916-samsung-gt58.dts (revision c532de5a67a70f8533d495f8f2aaa9a0491c3ad0)
1// SPDX-License-Identifier: GPL-2.0-only
2
3/dts-v1/;
4
5#include "msm8916-samsung-gt5-common.dtsi"
6
7/ {
8	model = "Samsung Galaxy Tab A 8.0 (2015)";
9	compatible = "samsung,gt58", "qcom,msm8916";
10	chassis-type = "tablet";
11
12	reg_5p4v: regulator-5p4v {
13		compatible = "regulator-fixed";
14		regulator-name = "vlcd_5p4v";
15		regulator-min-microvolt = <5400000>;
16		regulator-max-microvolt = <5400000>;
17
18		gpio = <&tlmm 8 GPIO_ACTIVE_HIGH>;
19		enable-active-high;
20
21		pinctrl-0 = <&buckbooster_en_default>;
22		pinctrl-names = "default";
23	};
24
25	reg_vdd_tsp: regulator-vdd-tsp {
26		compatible = "regulator-fixed";
27		regulator-name = "vdd_tsp";
28		regulator-min-microvolt = <3300000>;
29		regulator-max-microvolt = <3300000>;
30
31		gpio = <&tlmm 73 GPIO_ACTIVE_HIGH>;
32		enable-active-high;
33
34		pinctrl-0 = <&reg_tsp_en_default>;
35		pinctrl-names = "default";
36	};
37
38	i2c-amplifier {
39		compatible = "i2c-gpio";
40		sda-gpios = <&tlmm 55 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
41		scl-gpios = <&tlmm 56 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
42
43		pinctrl-0 = <&amp_i2c_default>;
44		pinctrl-names = "default";
45
46		#address-cells = <1>;
47		#size-cells = <0>;
48
49		speaker_codec: audio-codec@34 {
50			compatible = "nxp,tfa9895";
51			reg = <0x34>;
52			vddd-supply = <&pm8916_l5>;
53			sound-name-prefix = "Speaker";
54			#sound-dai-cells = <0>;
55		};
56	};
57
58	vibrator {
59		compatible = "gpio-vibrator";
60		enable-gpios = <&tlmm 76 GPIO_ACTIVE_HIGH>;
61
62		pinctrl-0 = <&vibrator_en_default>;
63		pinctrl-names = "default";
64	};
65};
66
67&blsp_i2c5 {
68	status = "okay";
69
70	touchscreen@20 {
71		compatible = "zinitix,bt532";
72		reg = <0x20>;
73		interrupt-parent = <&tlmm>;
74		interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
75
76		touchscreen-size-x = <768>;
77		touchscreen-size-y = <1024>;
78		linux,keycodes = <KEY_APPSELECT KEY_BACK>;
79
80		vcca-supply = <&reg_vdd_tsp>;
81		vdd-supply = <&pm8916_l6>;
82
83		pinctrl-0 = <&tsp_int_default>;
84		pinctrl-names = "default";
85	};
86};
87
88&gpu {
89	status = "okay";
90};
91
92&mdss {
93	status = "okay";
94};
95
96&mdss_dsi0 {
97	pinctrl-0 = <&mdss_default>;
98	pinctrl-1 = <&mdss_sleep>;
99	pinctrl-names = "default", "sleep";
100
101	panel@0 {
102		compatible = "samsung,lsl080al03", "samsung,s6d7aa0";
103		reg = <0>;
104
105		power-supply = <&reg_5p4v>;
106		vmipi-supply = <&pm8916_l5>;
107		reset-gpios = <&tlmm 97 GPIO_ACTIVE_LOW>;
108
109		port {
110			panel_in: endpoint {
111				remote-endpoint = <&mdss_dsi0_out>;
112			};
113		};
114	};
115};
116
117&mdss_dsi0_out {
118	data-lanes = <0 1 2 3>;
119	remote-endpoint = <&panel_in>;
120};
121
122&sound {
123	model = "samsung-a2015";
124	pinctrl-0 = <&cdc_pdm_default &sec_mi2s_default &secondary_mic_default>;
125	pinctrl-1 = <&cdc_pdm_sleep &sec_mi2s_sleep &secondary_mic_default>;
126	pinctrl-names = "default", "sleep";
127};
128
129&tlmm {
130	amp_i2c_default: amp-i2c-default-state {
131		pins = "gpio55", "gpio56";
132		function = "gpio";
133		drive-strength = <2>;
134		bias-disable;
135	};
136
137	buckbooster_en_default: buckbooster-en-default-state {
138		pins = "gpio8";
139		function = "gpio";
140		drive-strength = <2>;
141		bias-disable;
142	};
143
144	mdss_default: mdss-default-state {
145		pins = "gpio97";
146		function = "gpio";
147		drive-strength = <8>;
148		bias-disable;
149	};
150
151	mdss_sleep: mdss-sleep-state {
152		pins = "gpio97";
153		function = "gpio";
154		drive-strength = <2>;
155		bias-pull-down;
156	};
157
158	reg_tsp_en_default: reg-tsp-en-default-state {
159		pins = "gpio73";
160		function = "gpio";
161		drive-strength = <2>;
162		bias-disable;
163	};
164
165	secondary_mic_default: secondary-mic-default-state {
166		pins = "gpio98";
167		function = "gpio";
168		drive-strength = <2>;
169		bias-disable;
170		output-high;
171	};
172
173	tsp_int_default: tsp-int-default-state {
174		pins = "gpio13";
175		function = "gpio";
176		drive-strength = <2>;
177		bias-disable;
178	};
179
180	vibrator_en_default: vibrator-en-default-state {
181		pins = "gpio76";
182		function = "gpio";
183		drive-strength = <2>;
184		bias-disable;
185	};
186};
187