1// SPDX-License-Identifier: GPL-2.0-only 2 3#include "msm8916-samsung-a2015-common.dtsi" 4 5/ { 6 haptic { 7 compatible = "regulator-haptic"; 8 haptic-supply = <®_motor_vdd>; 9 min-microvolt = <3300000>; 10 max-microvolt = <3300000>; 11 }; 12 13 i2c-muic { 14 /* SM5504 MUIC instead of SM5502 */ 15 /delete-node/ extcon@25; 16 17 muic: extcon@14 { 18 compatible = "siliconmitus,sm5504-muic"; 19 reg = <0x14>; 20 21 interrupt-parent = <&tlmm>; 22 interrupts = <12 IRQ_TYPE_EDGE_FALLING>; 23 24 pinctrl-names = "default"; 25 pinctrl-0 = <&muic_int_default>; 26 }; 27 }; 28 29 reg_touch_key: regulator-touch-key { 30 compatible = "regulator-fixed"; 31 regulator-name = "touch_key"; 32 regulator-min-microvolt = <3300000>; 33 regulator-max-microvolt = <3300000>; 34 35 gpio = <&tlmm 97 GPIO_ACTIVE_HIGH>; 36 enable-active-high; 37 38 pinctrl-names = "default"; 39 pinctrl-0 = <&tkey_en_default>; 40 }; 41}; 42 43&blsp_i2c2 { 44 /* lis2hh12 accelerometer instead of BMC150 */ 45 /delete-node/ accelerometer@10; 46 /delete-node/ magnetometer@12; 47 48 accelerometer@1d { 49 compatible = "st,lis2hh12"; 50 reg = <0x1d>; 51 52 interrupt-parent = <&tlmm>; 53 interrupts = <115 IRQ_TYPE_LEVEL_HIGH>; 54 55 vdd-supply = <&pm8916_l5>; 56 vddio-supply = <&pm8916_l5>; 57 58 st,drdy-int-pin = <1>; 59 mount-matrix = "1", "0", "0", 60 "0", "-1", "0", 61 "0", "0", "1"; 62 63 pinctrl-0 = <&accel_int_default>; 64 pinctrl-names = "default"; 65 }; 66}; 67 68®_motor_vdd { 69 regulator-min-microvolt = <3300000>; 70 regulator-max-microvolt = <3300000>; 71}; 72 73&touchkey { 74 vcc-supply = <®_touch_key>; 75 vdd-supply = <®_touch_key>; 76}; 77 78&wcnss { 79 status = "okay"; 80}; 81 82&wcnss_iris { 83 compatible = "qcom,wcn3620"; 84}; 85 86&tlmm { 87 tkey_en_default: tkey-en-default-state { 88 pins = "gpio97"; 89 function = "gpio"; 90 91 drive-strength = <2>; 92 bias-disable; 93 }; 94}; 95