1// SPDX-License-Identifier: GPL-2.0-only 2 3/dts-v1/; 4 5#include "msm8916-pm8916.dtsi" 6#include <dt-bindings/gpio/gpio.h> 7#include <dt-bindings/input/input.h> 8#include <dt-bindings/leds/common.h> 9 10/ { 11 model = "BQ Aquaris X5 (Longcheer L8910)"; 12 compatible = "longcheer,l8910", "qcom,msm8916"; 13 14 aliases { 15 serial0 = &blsp1_uart2; 16 }; 17 18 chosen { 19 stdout-path = "serial0"; 20 }; 21 22 gpio-keys { 23 compatible = "gpio-keys"; 24 25 pinctrl-names = "default"; 26 pinctrl-0 = <&gpio_keys_default>; 27 28 label = "GPIO Buttons"; 29 30 volume-up { 31 label = "Volume Up"; 32 gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; 33 linux,code = <KEY_VOLUMEUP>; 34 }; 35 }; 36 37 leds { 38 compatible = "gpio-leds"; 39 40 led-0 { 41 gpios = <&msmgpio 17 GPIO_ACTIVE_HIGH>; 42 color = <LED_COLOR_ID_WHITE>; 43 default-state = "off"; 44 function = LED_FUNCTION_KBD_BACKLIGHT; 45 46 pinctrl-names = "default"; 47 pinctrl-0 = <&button_backlight_default>; 48 }; 49 }; 50 51 usb_id: usb-id { 52 compatible = "linux,extcon-usb-gpio"; 53 id-gpio = <&msmgpio 110 GPIO_ACTIVE_HIGH>; 54 pinctrl-names = "default"; 55 pinctrl-0 = <&usb_id_default>; 56 }; 57}; 58 59&blsp_i2c3 { 60 status = "okay"; 61 62 magnetometer@d { 63 compatible = "asahi-kasei,ak09911"; 64 reg = <0x0d>; 65 66 vdd-supply = <&pm8916_l17>; 67 vid-supply = <&pm8916_l6>; 68 69 reset-gpios = <&msmgpio 111 GPIO_ACTIVE_LOW>; 70 71 pinctrl-names = "default"; 72 pinctrl-0 = <&mag_reset_default>; 73 }; 74 75 imu@68 { 76 compatible = "bosch,bmi160"; 77 reg = <0x68>; 78 79 vdd-supply = <&pm8916_l17>; 80 vddio-supply = <&pm8916_l6>; 81 82 mount-matrix = "0", "1", "0", 83 "-1", "0", "0", 84 "0", "0", "1"; 85 }; 86}; 87 88&blsp1_uart2 { 89 status = "okay"; 90}; 91 92&pm8916_resin { 93 status = "okay"; 94 linux,code = <KEY_VOLUMEDOWN>; 95}; 96 97&pm8916_vib { 98 status = "okay"; 99}; 100 101&pronto { 102 status = "okay"; 103}; 104 105&sdhc_1 { 106 status = "okay"; 107 108 pinctrl-names = "default", "sleep"; 109 pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; 110 pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; 111}; 112 113&sdhc_2 { 114 status = "okay"; 115 116 pinctrl-names = "default", "sleep"; 117 pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; 118 pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; 119 120 cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>; 121}; 122 123&usb { 124 status = "okay"; 125 extcon = <&usb_id>, <&usb_id>; 126}; 127 128&usb_hs_phy { 129 extcon = <&usb_id>; 130}; 131 132&smd_rpm_regulators { 133 vdd_l1_l2_l3-supply = <&pm8916_s3>; 134 vdd_l4_l5_l6-supply = <&pm8916_s4>; 135 vdd_l7-supply = <&pm8916_s4>; 136 137 s3 { 138 regulator-min-microvolt = <1200000>; 139 regulator-max-microvolt = <1300000>; 140 }; 141 142 s4 { 143 regulator-min-microvolt = <1800000>; 144 regulator-max-microvolt = <2100000>; 145 }; 146 147 l1 { 148 regulator-min-microvolt = <1225000>; 149 regulator-max-microvolt = <1225000>; 150 }; 151 152 l2 { 153 regulator-min-microvolt = <1200000>; 154 regulator-max-microvolt = <1200000>; 155 }; 156 157 l4 { 158 regulator-min-microvolt = <2050000>; 159 regulator-max-microvolt = <2050000>; 160 }; 161 162 l5 { 163 regulator-min-microvolt = <1800000>; 164 regulator-max-microvolt = <1800000>; 165 }; 166 167 l6 { 168 regulator-min-microvolt = <1800000>; 169 regulator-max-microvolt = <1800000>; 170 }; 171 172 l7 { 173 regulator-min-microvolt = <1800000>; 174 regulator-max-microvolt = <1800000>; 175 }; 176 177 l8 { 178 regulator-min-microvolt = <2850000>; 179 regulator-max-microvolt = <2900000>; 180 }; 181 182 l9 { 183 regulator-min-microvolt = <3300000>; 184 regulator-max-microvolt = <3300000>; 185 }; 186 187 l10 { 188 regulator-min-microvolt = <2700000>; 189 regulator-max-microvolt = <2800000>; 190 }; 191 192 l11 { 193 regulator-min-microvolt = <1800000>; 194 regulator-max-microvolt = <2950000>; 195 regulator-allow-set-load; 196 regulator-system-load = <200000>; 197 }; 198 199 l12 { 200 regulator-min-microvolt = <1800000>; 201 regulator-max-microvolt = <2950000>; 202 }; 203 204 l13 { 205 regulator-min-microvolt = <3075000>; 206 regulator-max-microvolt = <3075000>; 207 }; 208 209 l14 { 210 regulator-min-microvolt = <1800000>; 211 regulator-max-microvolt = <3300000>; 212 }; 213 214 l15 { 215 regulator-min-microvolt = <1800000>; 216 regulator-max-microvolt = <3300000>; 217 }; 218 219 l16 { 220 regulator-min-microvolt = <1800000>; 221 regulator-max-microvolt = <3300000>; 222 }; 223 224 l17 { 225 regulator-min-microvolt = <2850000>; 226 regulator-max-microvolt = <2850000>; 227 }; 228 229 l18 { 230 regulator-min-microvolt = <2700000>; 231 regulator-max-microvolt = <2700000>; 232 }; 233}; 234 235&msmgpio { 236 button_backlight_default: button-backlight-default { 237 pins = "gpio17"; 238 function = "gpio"; 239 240 drive-strength = <2>; 241 bias-disable; 242 }; 243 244 gpio_keys_default: gpio-keys-default { 245 pins = "gpio107"; 246 function = "gpio"; 247 248 drive-strength = <2>; 249 bias-pull-up; 250 }; 251 252 mag_reset_default: mag-reset-default { 253 pins = "gpio111"; 254 function = "gpio"; 255 256 drive-strength = <2>; 257 bias-disable; 258 }; 259 260 usb_id_default: usb-id-default { 261 pins = "gpio110"; 262 function = "gpio"; 263 264 drive-strength = <8>; 265 bias-pull-up; 266 }; 267}; 268