1// SPDX-License-Identifier: GPL-2.0-only 2 3/dts-v1/; 4 5#include "msm8916-pm8916.dtsi" 6#include "msm8916-modem-qdsp6.dtsi" 7 8#include <dt-bindings/gpio/gpio.h> 9 10/ { 11 model = "LG K10 (K420n)"; 12 compatible = "lg,m216", "qcom,msm8916"; 13 chassis-type = "handset"; 14 15 aliases { 16 mmc0 = &sdhc_1; /* eMMC */ 17 mmc1 = &sdhc_2; /* SD card */ 18 serial0 = &blsp_uart2; 19 }; 20 21 chosen { 22 stdout-path = "serial0"; 23 }; 24 25 battery: battery { 26 compatible = "simple-battery"; 27 voltage-min-design-microvolt = <3300000>; 28 voltage-max-design-microvolt = <4350000>; 29 energy-full-design-microwatt-hours = <8800000>; 30 charge-full-design-microamp-hours = <2300000>; 31 32 ocv-capacity-celsius = <25>; 33 ocv-capacity-table-0 = <4342000 100>, <4266000 95>, <4206000 90>, 34 <4148000 85>, <4094000 80>, <4046000 75>, <3994000 70>, 35 <3956000 65>, <3916000 60>, <3866000 55>, <3831000 50>, 36 <3808000 45>, <3789000 40>, <3776000 35>, <3769000 30>, 37 <3760000 25>, <3740000 20>, <3712000 16>, <3684000 13>, 38 <3676000 11>, <3674000 10>, <3672000 9>, <3669000 8>, 39 <3665000 7>, <3660000 6>, <3643000 5>, <3602000 4>, 40 <3542000 3>, <3458000 2>, <3326000 1>, <3000000 0>; 41 }; 42 43 gpio-keys { 44 compatible = "gpio-keys"; 45 46 pinctrl-0 = <&gpio_keys_default>; 47 pinctrl-names = "default"; 48 49 label = "GPIO Buttons"; 50 51 volume-up-button { 52 label = "Volume Up"; 53 gpios = <&tlmm 107 GPIO_ACTIVE_LOW>; 54 linux,code = <KEY_VOLUMEUP>; 55 }; 56 57 volume-down-button { 58 label = "Volume Down"; 59 gpios = <&tlmm 108 GPIO_ACTIVE_LOW>; 60 linux,code = <KEY_VOLUMEDOWN>; 61 }; 62 }; 63}; 64 65&blsp_i2c2 { 66 status = "okay"; 67 68 accelerometer@11 { 69 compatible = "bosch,bmc150_accel"; 70 reg = <0x11>; 71 72 interrupts-extended = <&tlmm 115 IRQ_TYPE_EDGE_RISING>; 73 74 mount-matrix = "0", "1", "0", 75 "-1", "0", "0", 76 "0", "0", "1"; 77 78 vdd-supply = <&pm8916_l17>; 79 vddio-supply = <&pm8916_l6>; 80 81 pinctrl-0 = <&accel_int_default>; 82 pinctrl-names = "default"; 83 }; 84 85 magnetometer@13 { 86 compatible = "bosch,bmc150_magn"; 87 reg = <0x13>; 88 89 interrupts-extended = <&tlmm 69 IRQ_TYPE_EDGE_RISING>; 90 91 vdd-supply = <&pm8916_l17>; 92 vddio-supply = <&pm8916_l6>; 93 94 pinctrl-0 = <&magn_int_default>; 95 pinctrl-names = "default"; 96 }; 97}; 98 99&blsp_i2c5 { 100 status = "okay"; 101 102 touchscreen@34 { 103 compatible = "melfas,mip4_ts"; 104 reg = <0x34>; 105 106 interrupts-extended = <&tlmm 13 IRQ_TYPE_EDGE_FALLING>; 107 ce-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>; 108 109 pinctrl-0 = <&touchscreen_default>; 110 pinctrl-names = "default"; 111 }; 112}; 113 114&blsp_uart2 { 115 status = "okay"; 116}; 117 118&mpss_mem { 119 reg = <0x0 0x86800000 0x0 0x4a00000>; 120}; 121 122&pm8916_bms { 123 monitored-battery = <&battery>; 124 power-supplies = <&pm8916_charger>; 125 126 status = "okay"; 127}; 128 129&pm8916_charger { 130 qcom,fast-charge-safe-current = <700000>; 131 qcom,fast-charge-safe-voltage = <4300000>; 132 133 monitored-battery = <&battery>; 134 status = "okay"; 135}; 136 137&pm8916_codec { 138 qcom,micbias1-ext-cap; 139 qcom,micbias-lvl = <2800>; 140 qcom,mbhc-vthreshold-low = <75 100 120 180 500>; 141 qcom,mbhc-vthreshold-high = <75 100 120 180 500>; 142 qcom,hphl-jack-type-normally-open; 143}; 144 145&pm8916_rpm_regulators { 146 pm8916_l17: l17 { 147 regulator-min-microvolt = <2850000>; 148 regulator-max-microvolt = <2850000>; 149 }; 150}; 151 152&pm8916_vib { 153 status = "okay"; 154}; 155 156&sdhc_1 { 157 status = "okay"; 158}; 159 160&sdhc_2 { 161 pinctrl-0 = <&sdc2_default &sdc2_cd_default>; 162 pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>; 163 pinctrl-names = "default", "sleep"; 164 165 cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; 166 167 status = "okay"; 168}; 169 170&sound { 171 audio-routing = 172 "AMIC1", "MIC BIAS External1", 173 "AMIC2", "MIC BIAS Internal2", 174 "AMIC3", "MIC BIAS External1"; 175}; 176 177&usb { 178 dr_mode = "peripheral"; 179 extcon = <&pm8916_charger>; 180 status = "okay"; 181}; 182 183&usb_hs_phy { 184 extcon = <&pm8916_charger>; 185}; 186 187&venus { 188 status = "okay"; 189}; 190 191&venus_mem { 192 status = "okay"; 193}; 194 195&wcnss { 196 status = "okay"; 197}; 198 199&wcnss_iris { 200 compatible = "qcom,wcn3620"; 201}; 202 203&wcnss_mem { 204 status = "okay"; 205}; 206 207&tlmm { 208 accel_int_default: accel-int-default-state { 209 pins = "gpio115"; 210 function = "gpio"; 211 drive-strength = <2>; 212 bias-disable; 213 }; 214 215 gpio_keys_default: gpio-keys-default-state { 216 pins = "gpio107", "gpio108"; 217 function = "gpio"; 218 drive-strength = <2>; 219 bias-pull-up; 220 }; 221 222 magn_int_default: magn-int-default-state { 223 pins = "gpio69"; 224 function = "gpio"; 225 drive-strength = <2>; 226 bias-disable; 227 }; 228 229 sdc2_cd_default: sdc2-cd-default-state { 230 pins = "gpio38"; 231 function = "gpio"; 232 drive-strength = <2>; 233 bias-disable; 234 }; 235 236 touchscreen_default: touchscreen-default-state { 237 touchscreen-pins { 238 pins = "gpio13"; 239 function = "gpio"; 240 drive-strength = <2>; 241 bias-pull-up; 242 }; 243 244 ce-pins { 245 pins = "gpio12"; 246 function = "gpio"; 247 drive-strength = <2>; 248 bias-disable; 249 }; 250 }; 251}; 252