1// SPDX-License-Identifier: GPL-2.0-only 2 3/dts-v1/; 4 5#include "msm8916-pm8916.dtsi" 6#include "msm8916-modem-qdsp6.dtsi" 7 8#include <dt-bindings/gpio/gpio.h> 9#include <dt-bindings/input/input.h> 10#include <dt-bindings/leds/common.h> 11 12/ { 13 model = "GPLUS FL8005A"; 14 compatible = "gplus,fl8005a", "qcom,msm8916"; 15 chassis-type = "tablet"; 16 17 aliases { 18 mmc0 = &sdhc_1; /* eMMC */ 19 mmc1 = &sdhc_2; /* SD card */ 20 serial0 = &blsp_uart2; 21 }; 22 23 chosen { 24 stdout-path = "serial0"; 25 }; 26 27 battery: battery { 28 compatible = "simple-battery"; 29 device-chemistry = "lithium-ion-polymer"; 30 voltage-min-design-microvolt = <3700000>; 31 voltage-max-design-microvolt = <4200000>; 32 energy-full-design-microwatt-hours = <13690000>; 33 charge-full-design-microamp-hours = <3700000>; 34 35 ocv-capacity-celsius = <25>; 36 ocv-capacity-table-0 = 37 <4186000 100>, <4126000 95>, <4078000 90>, 38 <4036000 85>, <3997000 80>, <3962000 75>, 39 <3932000 70>, <3904000 65>, <3874000 60>, 40 <3839000 55>, <3809000 50>, <3792000 45>, 41 <3780000 40>, <3772000 35>, <3764000 30>, 42 <3752000 25>, <3731000 20>, <3704000 16>, 43 <3677000 13>, <3670000 11>, <3668000 10>, 44 <3666000 9>, <3662000 8>, <3658000 7>, <3648000 6>, 45 <3624000 5>, <3580000 4>, <3518000 3>, <3434000 2>, 46 <3310000 1>, <3000000 0>; 47 }; 48 49 flash-led-controller { 50 /* Actually qcom,leds-gpio-flash */ 51 compatible = "sgmicro,sgm3140"; 52 enable-gpios = <&tlmm 31 GPIO_ACTIVE_HIGH>; 53 flash-gpios = <&tlmm 32 GPIO_ACTIVE_HIGH>; 54 55 pinctrl-0 = <&camera_flash_default>; 56 pinctrl-names = "default"; 57 58 flash_led: led { 59 function = LED_FUNCTION_FLASH; 60 color = <LED_COLOR_ID_WHITE>; 61 flash-max-timeout-us = <250000>; 62 }; 63 }; 64 65 gpio-keys { 66 compatible = "gpio-keys"; 67 68 pinctrl-0 = <&gpio_keys_default>; 69 pinctrl-names = "default"; 70 71 button-volume-up { 72 label = "Volume Up"; 73 gpios = <&tlmm 107 GPIO_ACTIVE_LOW>; 74 linux,code = <KEY_VOLUMEUP>; 75 }; 76 }; 77 78 gpio-leds { 79 compatible = "gpio-leds"; 80 81 pinctrl-0 = <&gpio_leds_default>; 82 pinctrl-names = "default"; 83 84 led-red { 85 function = LED_FUNCTION_CHARGING; 86 color = <LED_COLOR_ID_RED>; 87 gpios = <&tlmm 117 GPIO_ACTIVE_HIGH>; 88 retain-state-suspended; 89 }; 90 91 led-green { 92 function = LED_FUNCTION_CHARGING; 93 color = <LED_COLOR_ID_GREEN>; 94 gpios = <&tlmm 118 GPIO_ACTIVE_HIGH>; 95 retain-state-suspended; 96 }; 97 }; 98 99 usb_id: usb-id { 100 compatible = "linux,extcon-usb-gpio"; 101 id-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>; 102 pinctrl-0 = <&usb_id_default>; 103 pinctrl-names = "default"; 104 }; 105}; 106 107&blsp_i2c5 { 108 status = "okay"; 109 110 touchscreen@38 { 111 /* Actually ft5402 */ 112 compatible = "edt,edt-ft5406"; 113 reg = <0x38>; 114 115 interrupt-parent = <&tlmm>; 116 interrupts = <13 IRQ_TYPE_EDGE_FALLING>; 117 118 reset-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>; 119 120 vcc-supply = <&pm8916_l17>; 121 iovcc-supply = <&pm8916_l6>; 122 123 touchscreen-size-x = <800>; 124 touchscreen-size-y = <500>; 125 touchscreen-inverted-x; 126 touchscreen-swapped-x-y; 127 128 pinctrl-0 = <&touchscreen_default>; 129 pinctrl-names = "default"; 130 }; 131}; 132 133&blsp_uart2 { 134 status = "okay"; 135}; 136 137&mpss_mem { 138 reg = <0x0 0x86800000 0x0 0x5000000>; 139}; 140 141&pm8916_bms { 142 monitored-battery = <&battery>; 143 status = "okay"; 144}; 145 146&pm8916_codec { 147 qcom,micbias-lvl = <2800>; 148 qcom,mbhc-vthreshold-low = <150 180 237 450 500>; 149 qcom,mbhc-vthreshold-high = <150 180 237 450 500>; 150 qcom,hphl-jack-type-normally-open; 151}; 152 153&pm8916_resin { 154 linux,code = <KEY_VOLUMEDOWN>; 155 status = "okay"; 156}; 157 158&pm8916_rpm_regulators { 159 pm8916_l17: l17 { 160 regulator-min-microvolt = <2850000>; 161 regulator-max-microvolt = <2850000>; 162 }; 163}; 164 165&pm8916_vib { 166 status = "okay"; 167}; 168 169&sdhc_1 { 170 status = "okay"; 171}; 172 173&sdhc_2 { 174 pinctrl-0 = <&sdc2_default &sdc2_cd_default>; 175 pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>; 176 pinctrl-names = "default", "sleep"; 177 178 cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; 179 180 status = "okay"; 181}; 182 183&sound { 184 model = "msm8916-1mic"; 185 audio-routing = 186 "AMIC1", "MIC BIAS External1", 187 "AMIC2", "MIC BIAS Internal2", 188 "AMIC3", "MIC BIAS External1"; 189}; 190 191&usb { 192 extcon = <&usb_id>, <&usb_id>; 193 status = "okay"; 194}; 195 196&usb_hs_phy { 197 extcon = <&usb_id>; 198}; 199 200&venus { 201 status = "okay"; 202}; 203 204&venus_mem { 205 status = "okay"; 206}; 207 208&wcnss { 209 status = "okay"; 210}; 211 212&wcnss_iris { 213 compatible = "qcom,wcn3620"; 214}; 215 216&wcnss_mem { 217 status = "okay"; 218}; 219 220&tlmm { 221 camera_flash_default: camera-flash-default-state { 222 pins = "gpio31", "gpio32"; 223 function = "gpio"; 224 drive-strength = <2>; 225 bias-disable; 226 }; 227 228 gpio_keys_default: gpio-keys-default-state { 229 pins = "gpio107"; 230 function = "gpio"; 231 drive-strength = <2>; 232 bias-pull-up; 233 }; 234 235 gpio_leds_default: gpio-led-default-state { 236 pins = "gpio117", "gpio118"; 237 function = "gpio"; 238 drive-strength = <2>; 239 bias-disable; 240 }; 241 242 sdc2_cd_default: sdc2-cd-default-state { 243 pins = "gpio38"; 244 function = "gpio"; 245 drive-strength = <2>; 246 bias-disable; 247 }; 248 249 touchscreen_default: touchscreen-default-state { 250 reset-pins { 251 pins = "gpio12"; 252 function = "gpio"; 253 drive-strength = <2>; 254 bias-disable; 255 }; 256 257 touchscreen-pins { 258 pins = "gpio13"; 259 function = "gpio"; 260 drive-strength = <2>; 261 bias-pull-up; 262 }; 263 }; 264 265 usb_id_default: usb-id-default-state { 266 pins = "gpio110"; 267 function = "gpio"; 268 drive-strength = <8>; 269 bias-pull-up; 270 }; 271}; 272