1// SPDX-License-Identifier: GPL-2.0-only 2 3/dts-v1/; 4 5#include "msm8916-pm8916.dtsi" 6#include <dt-bindings/gpio/gpio.h> 7#include <dt-bindings/input/input.h> 8#include <dt-bindings/interrupt-controller/irq.h> 9 10/ { 11 model = "Asus Zenfone 2 Laser"; 12 compatible = "asus,z00l", "qcom,msm8916"; 13 chassis-type = "handset"; 14 15 aliases { 16 serial0 = &blsp1_uart2; 17 }; 18 19 chosen { 20 stdout-path = "serial0"; 21 }; 22 23 gpio-keys { 24 compatible = "gpio-keys"; 25 26 pinctrl-names = "default"; 27 pinctrl-0 = <&gpio_keys_default>; 28 29 label = "GPIO Buttons"; 30 31 button-volume-up { 32 label = "Volume Up"; 33 gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; 34 linux,code = <KEY_VOLUMEUP>; 35 debounce-interval = <15>; 36 }; 37 38 button-volume-down { 39 label = "Volume Down"; 40 gpios = <&msmgpio 117 GPIO_ACTIVE_LOW>; 41 linux,code = <KEY_VOLUMEDOWN>; 42 debounce-interval = <15>; 43 }; 44 }; 45 46 reg_sd_vmmc: regulator-sdcard-vmmc { 47 compatible = "regulator-fixed"; 48 regulator-name = "sdcard-vmmc"; 49 regulator-min-microvolt = <2950000>; 50 regulator-max-microvolt = <2950000>; 51 52 gpio = <&msmgpio 87 GPIO_ACTIVE_HIGH>; 53 enable-active-high; 54 55 startup-delay-us = <200>; 56 57 pinctrl-names = "default"; 58 pinctrl-0 = <&sd_vmmc_en_default>; 59 }; 60 61 usb_id: usb-id { 62 compatible = "linux,extcon-usb-gpio"; 63 id-gpios = <&msmgpio 110 GPIO_ACTIVE_HIGH>; 64 pinctrl-names = "default"; 65 pinctrl-0 = <&usb_id_default>; 66 }; 67}; 68 69&blsp_i2c2 { 70 status = "okay"; 71 72 magnetometer@c { 73 compatible = "asahi-kasei,ak09911"; 74 reg = <0x0c>; 75 76 vdd-supply = <&pm8916_l8>; 77 vid-supply = <&pm8916_l6>; 78 79 reset-gpios = <&msmgpio 112 GPIO_ACTIVE_LOW>; 80 81 pinctrl-names = "default"; 82 pinctrl-0 = <&mag_reset_default>; 83 }; 84 85 imu@68 { 86 compatible = "invensense,mpu6515"; 87 reg = <0x68>; 88 89 interrupt-parent = <&msmgpio>; 90 interrupts = <36 IRQ_TYPE_EDGE_RISING>; 91 92 vdd-supply = <&pm8916_l17>; 93 vddio-supply = <&pm8916_l6>; 94 95 pinctrl-names = "default"; 96 pinctrl-0 = <&imu_default>; 97 98 mount-matrix = "1", "0", "0", 99 "0", "-1", "0", 100 "0", "0", "1"; 101 }; 102}; 103 104&blsp_i2c5 { 105 status = "okay"; 106 107 touchscreen@38 { 108 compatible = "edt,edt-ft5306"; 109 reg = <0x38>; 110 111 interrupt-parent = <&msmgpio>; 112 interrupts = <13 IRQ_TYPE_EDGE_FALLING>; 113 114 reset-gpios = <&msmgpio 12 GPIO_ACTIVE_LOW>; 115 116 vcc-supply = <&pm8916_l11>; 117 iovcc-supply = <&pm8916_l6>; 118 119 touchscreen-size-x = <720>; 120 touchscreen-size-y = <1280>; 121 122 pinctrl-names = "default"; 123 pinctrl-0 = <&touchscreen_default>; 124 }; 125}; 126 127&blsp1_uart2 { 128 status = "okay"; 129}; 130 131&pronto { 132 status = "okay"; 133}; 134 135&sdhc_1 { 136 status = "okay"; 137 138 pinctrl-names = "default", "sleep"; 139 pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; 140 pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; 141}; 142 143&sdhc_2 { 144 status = "okay"; 145 vmmc-supply = <®_sd_vmmc>; 146 147 pinctrl-names = "default", "sleep"; 148 pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; 149 pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; 150 cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>; 151}; 152 153&usb { 154 status = "okay"; 155 extcon = <&usb_id>, <&usb_id>; 156}; 157 158&usb_hs_phy { 159 extcon = <&usb_id>; 160}; 161 162&smd_rpm_regulators { 163 vdd_l1_l2_l3-supply = <&pm8916_s3>; 164 vdd_l4_l5_l6-supply = <&pm8916_s4>; 165 vdd_l7-supply = <&pm8916_s4>; 166 167 s3 { 168 regulator-min-microvolt = <1200000>; 169 regulator-max-microvolt = <1300000>; 170 }; 171 172 s4 { 173 regulator-min-microvolt = <1800000>; 174 regulator-max-microvolt = <2100000>; 175 }; 176 177 l1 { 178 regulator-min-microvolt = <1225000>; 179 regulator-max-microvolt = <1225000>; 180 }; 181 182 l2 { 183 regulator-min-microvolt = <1200000>; 184 regulator-max-microvolt = <1200000>; 185 }; 186 187 l4 { 188 regulator-min-microvolt = <2050000>; 189 regulator-max-microvolt = <2050000>; 190 }; 191 192 l5 { 193 regulator-min-microvolt = <1800000>; 194 regulator-max-microvolt = <1800000>; 195 }; 196 197 l6 { 198 regulator-min-microvolt = <1800000>; 199 regulator-max-microvolt = <1800000>; 200 }; 201 202 l7 { 203 regulator-min-microvolt = <1800000>; 204 regulator-max-microvolt = <1800000>; 205 }; 206 207 l8 { 208 regulator-min-microvolt = <2850000>; 209 regulator-max-microvolt = <2900000>; 210 }; 211 212 l9 { 213 regulator-min-microvolt = <3300000>; 214 regulator-max-microvolt = <3300000>; 215 }; 216 217 l10 { 218 regulator-min-microvolt = <2700000>; 219 regulator-max-microvolt = <2800000>; 220 }; 221 222 l11 { 223 regulator-min-microvolt = <1800000>; 224 regulator-max-microvolt = <2950000>; 225 regulator-allow-set-load; 226 regulator-system-load = <200000>; 227 }; 228 229 l12 { 230 regulator-min-microvolt = <1800000>; 231 regulator-max-microvolt = <2950000>; 232 }; 233 234 l13 { 235 regulator-min-microvolt = <3075000>; 236 regulator-max-microvolt = <3075000>; 237 }; 238 239 l14 { 240 regulator-min-microvolt = <1800000>; 241 regulator-max-microvolt = <3300000>; 242 }; 243 244 l15 { 245 regulator-min-microvolt = <1800000>; 246 regulator-max-microvolt = <3300000>; 247 }; 248 249 l16 { 250 regulator-min-microvolt = <1800000>; 251 regulator-max-microvolt = <3300000>; 252 }; 253 254 l17 { 255 regulator-min-microvolt = <2850000>; 256 regulator-max-microvolt = <2850000>; 257 }; 258 259 l18 { 260 regulator-min-microvolt = <2700000>; 261 regulator-max-microvolt = <2700000>; 262 }; 263}; 264 265&msmgpio { 266 gpio_keys_default: gpio-keys-default-state { 267 pins = "gpio107", "gpio117"; 268 function = "gpio"; 269 270 drive-strength = <2>; 271 bias-pull-up; 272 }; 273 274 imu_default: imu-default-state { 275 pins = "gpio36"; 276 function = "gpio"; 277 278 drive-strength = <2>; 279 bias-disable; 280 }; 281 282 mag_reset_default: mag-reset-default-state { 283 pins = "gpio112"; 284 function = "gpio"; 285 286 drive-strength = <2>; 287 bias-disable; 288 }; 289 290 sd_vmmc_en_default: sd-vmmc-en-default-state { 291 pins = "gpio87"; 292 function = "gpio"; 293 294 drive-strength = <2>; 295 bias-disable; 296 }; 297 298 touchscreen_default: touchscreen-default-state { 299 touch-pins { 300 pins = "gpio13"; 301 function = "gpio"; 302 303 drive-strength = <2>; 304 bias-pull-up; 305 }; 306 307 reset-pins { 308 pins = "gpio12"; 309 function = "gpio"; 310 311 drive-strength = <2>; 312 bias-disable; 313 }; 314 }; 315 316 usb_id_default: usb-id-default-state { 317 pins = "gpio110"; 318 function = "gpio"; 319 320 drive-strength = <8>; 321 bias-pull-up; 322 }; 323}; 324