1// SPDX-License-Identifier: GPL-2.0-only 2 3/dts-v1/; 4 5#include "msm8916-pm8916.dtsi" 6#include <dt-bindings/gpio/gpio.h> 7#include <dt-bindings/input/input.h> 8#include <dt-bindings/interrupt-controller/irq.h> 9 10/ { 11 model = "Asus Zenfone 2 Laser"; 12 compatible = "asus,z00l", "qcom,msm8916"; 13 chassis-type = "handset"; 14 15 aliases { 16 mmc0 = &sdhc_1; /* eMMC */ 17 mmc1 = &sdhc_2; /* SD card */ 18 serial0 = &blsp_uart2; 19 }; 20 21 chosen { 22 stdout-path = "serial0"; 23 }; 24 25 gpio-keys { 26 compatible = "gpio-keys"; 27 28 pinctrl-names = "default"; 29 pinctrl-0 = <&gpio_keys_default>; 30 31 label = "GPIO Buttons"; 32 33 button-volume-up { 34 label = "Volume Up"; 35 gpios = <&tlmm 107 GPIO_ACTIVE_LOW>; 36 linux,code = <KEY_VOLUMEUP>; 37 debounce-interval = <15>; 38 }; 39 40 button-volume-down { 41 label = "Volume Down"; 42 gpios = <&tlmm 117 GPIO_ACTIVE_LOW>; 43 linux,code = <KEY_VOLUMEDOWN>; 44 debounce-interval = <15>; 45 }; 46 }; 47 48 reg_sd_vmmc: regulator-sdcard-vmmc { 49 compatible = "regulator-fixed"; 50 regulator-name = "sdcard-vmmc"; 51 regulator-min-microvolt = <2950000>; 52 regulator-max-microvolt = <2950000>; 53 54 gpio = <&tlmm 87 GPIO_ACTIVE_HIGH>; 55 enable-active-high; 56 57 startup-delay-us = <200>; 58 59 pinctrl-names = "default"; 60 pinctrl-0 = <&sd_vmmc_en_default>; 61 }; 62 63 usb_id: usb-id { 64 compatible = "linux,extcon-usb-gpio"; 65 id-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>; 66 pinctrl-names = "default"; 67 pinctrl-0 = <&usb_id_default>; 68 }; 69}; 70 71&blsp_i2c2 { 72 status = "okay"; 73 74 magnetometer@c { 75 compatible = "asahi-kasei,ak09911"; 76 reg = <0x0c>; 77 78 vdd-supply = <&pm8916_l8>; 79 vid-supply = <&pm8916_l6>; 80 81 reset-gpios = <&tlmm 112 GPIO_ACTIVE_LOW>; 82 83 pinctrl-names = "default"; 84 pinctrl-0 = <&mag_reset_default>; 85 }; 86 87 imu@68 { 88 compatible = "invensense,mpu6515"; 89 reg = <0x68>; 90 91 interrupt-parent = <&tlmm>; 92 interrupts = <36 IRQ_TYPE_EDGE_RISING>; 93 94 vdd-supply = <&pm8916_l17>; 95 vddio-supply = <&pm8916_l6>; 96 97 pinctrl-names = "default"; 98 pinctrl-0 = <&imu_default>; 99 100 mount-matrix = "1", "0", "0", 101 "0", "-1", "0", 102 "0", "0", "1"; 103 }; 104}; 105 106&blsp_i2c5 { 107 status = "okay"; 108 109 touchscreen@38 { 110 compatible = "edt,edt-ft5306"; 111 reg = <0x38>; 112 113 interrupt-parent = <&tlmm>; 114 interrupts = <13 IRQ_TYPE_EDGE_FALLING>; 115 116 reset-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>; 117 118 vcc-supply = <&pm8916_l11>; 119 iovcc-supply = <&pm8916_l6>; 120 121 touchscreen-size-x = <720>; 122 touchscreen-size-y = <1280>; 123 124 pinctrl-names = "default"; 125 pinctrl-0 = <&touchscreen_default>; 126 }; 127}; 128 129&blsp_uart2 { 130 status = "okay"; 131}; 132 133&pm8916_rpm_regulators { 134 pm8916_l17: l17 { 135 regulator-min-microvolt = <2850000>; 136 regulator-max-microvolt = <2850000>; 137 }; 138}; 139 140&sdhc_1 { 141 status = "okay"; 142}; 143 144&sdhc_2 { 145 status = "okay"; 146 vmmc-supply = <®_sd_vmmc>; 147 148 pinctrl-names = "default", "sleep"; 149 pinctrl-0 = <&sdc2_default &sdc2_cd_default>; 150 pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>; 151 cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; 152}; 153 154&usb { 155 status = "okay"; 156 extcon = <&usb_id>, <&usb_id>; 157}; 158 159&usb_hs_phy { 160 extcon = <&usb_id>; 161}; 162 163&venus { 164 status = "okay"; 165}; 166 167&venus_mem { 168 status = "okay"; 169}; 170 171&wcnss { 172 status = "okay"; 173}; 174 175&wcnss_iris { 176 compatible = "qcom,wcn3620"; 177}; 178 179&wcnss_mem { 180 status = "okay"; 181}; 182 183&tlmm { 184 gpio_keys_default: gpio-keys-default-state { 185 pins = "gpio107", "gpio117"; 186 function = "gpio"; 187 188 drive-strength = <2>; 189 bias-pull-up; 190 }; 191 192 imu_default: imu-default-state { 193 pins = "gpio36"; 194 function = "gpio"; 195 196 drive-strength = <2>; 197 bias-disable; 198 }; 199 200 mag_reset_default: mag-reset-default-state { 201 pins = "gpio112"; 202 function = "gpio"; 203 204 drive-strength = <2>; 205 bias-disable; 206 }; 207 208 sd_vmmc_en_default: sd-vmmc-en-default-state { 209 pins = "gpio87"; 210 function = "gpio"; 211 212 drive-strength = <2>; 213 bias-disable; 214 }; 215 216 sdc2_cd_default: sdc2-cd-default-state { 217 pins = "gpio38"; 218 function = "gpio"; 219 drive-strength = <2>; 220 bias-disable; 221 }; 222 223 touchscreen_default: touchscreen-default-state { 224 touch-pins { 225 pins = "gpio13"; 226 function = "gpio"; 227 228 drive-strength = <2>; 229 bias-pull-up; 230 }; 231 232 reset-pins { 233 pins = "gpio12"; 234 function = "gpio"; 235 236 drive-strength = <2>; 237 bias-disable; 238 }; 239 }; 240 241 usb_id_default: usb-id-default-state { 242 pins = "gpio110"; 243 function = "gpio"; 244 245 drive-strength = <8>; 246 bias-pull-up; 247 }; 248}; 249