1// SPDX-License-Identifier: GPL-2.0-only 2/dts-v1/; 3/* 4 * Copyright (c) 2017, The Linux Foundation. All rights reserved. 5 */ 6#include "ipq8074.dtsi" 7#include "pmp8074.dtsi" 8#include <dt-bindings/gpio/gpio.h> 9 10/ { 11 model = "Qualcomm Technologies, Inc. IPQ8074-HK01"; 12 compatible = "qcom,ipq8074-hk01", "qcom,ipq8074"; 13 14 aliases { 15 serial0 = &blsp1_uart5; 16 serial1 = &blsp1_uart3; 17 }; 18 19 chosen { 20 stdout-path = "serial0"; 21 }; 22 23 memory@40000000 { 24 device_type = "memory"; 25 reg = <0x0 0x40000000 0x0 0x20000000>; 26 }; 27 28 vreg_dummy: regulator-dummy { }; 29}; 30 31&blsp1_i2c2 { 32 status = "okay"; 33}; 34 35&blsp1_spi1 { 36 status = "okay"; 37 38 flash@0 { 39 #address-cells = <1>; 40 #size-cells = <1>; 41 compatible = "jedec,spi-nor"; 42 reg = <0>; 43 spi-max-frequency = <50000000>; 44 }; 45}; 46 47&blsp1_uart3 { 48 status = "okay"; 49}; 50 51&blsp1_uart5 { 52 status = "okay"; 53}; 54 55&pcie0 { 56 status = "okay"; 57 perst-gpios = <&tlmm 61 GPIO_ACTIVE_LOW>; 58}; 59 60&pcie1 { 61 status = "okay"; 62 perst-gpios = <&tlmm 58 GPIO_ACTIVE_LOW>; 63}; 64 65&pcie_qmp0 { 66 status = "okay"; 67}; 68 69&pcie_qmp1 { 70 status = "okay"; 71}; 72 73&qpic_bam { 74 status = "okay"; 75}; 76 77&qpic_nand { 78 status = "okay"; 79 80 nand@0 { 81 reg = <0>; 82 nand-ecc-strength = <4>; 83 nand-ecc-step-size = <512>; 84 nand-bus-width = <8>; 85 }; 86}; 87 88&sdhc_1 { 89 status = "okay"; 90 vqmmc-supply = <&l11>; 91}; 92 93&qusb_phy_0 { 94 status = "okay"; 95}; 96 97&qusb_phy_1 { 98 status = "okay"; 99}; 100 101&ssphy_0 { 102 status = "okay"; 103 vdda-phy-supply = <&vreg_dummy>; 104 vdda-pll-supply = <&vreg_dummy>; 105}; 106 107&ssphy_1 { 108 status = "okay"; 109 vdda-phy-supply = <&vreg_dummy>; 110 vdda-pll-supply = <&vreg_dummy>; 111}; 112 113&usb_0 { 114 status = "okay"; 115}; 116 117&usb_1 { 118 status = "okay"; 119}; 120