1/dts-v1/; 2 3#include "tegra210-p2180.dtsi" 4#include "tegra210-p2597.dtsi" 5 6/ { 7 model = "NVIDIA Jetson TX1 Developer Kit"; 8 compatible = "nvidia,p2371-2180", "nvidia,tegra210"; 9 10 pcie-controller@01003000 { 11 status = "okay"; 12 13 avdd-pll-uerefe-supply = <&avdd_1v05_pll>; 14 hvddio-pex-supply = <&vdd_1v8>; 15 dvddio-pex-supply = <&vdd_pex_1v05>; 16 dvdd-pex-pll-supply = <&vdd_pex_1v05>; 17 hvdd-pex-pll-e-supply = <&vdd_1v8>; 18 vddio-pex-ctl-supply = <&vdd_1v8>; 19 20 pci@1,0 { 21 phys = <&{/padctl@7009f000/pads/pcie/lanes/pcie-0}>, 22 <&{/padctl@7009f000/pads/pcie/lanes/pcie-1}>, 23 <&{/padctl@7009f000/pads/pcie/lanes/pcie-2}>, 24 <&{/padctl@7009f000/pads/pcie/lanes/pcie-3}>; 25 phy-names = "pcie-0", "pcie-1", "pcie-2", "pcie-3"; 26 status = "okay"; 27 }; 28 29 pci@2,0 { 30 phys = <&{/padctl@7009f000/pads/pcie/lanes/pcie-4}>; 31 phy-names = "pcie-0"; 32 status = "okay"; 33 }; 34 }; 35 36 host1x@50000000 { 37 dsi@54300000 { 38 status = "okay"; 39 40 avdd-dsi-csi-supply = <&vdd_dsi_csi>; 41 42 panel@0 { 43 compatible = "auo,b080uan01"; 44 reg = <0>; 45 46 enable-gpios = <&gpio TEGRA_GPIO(V, 2) 47 GPIO_ACTIVE_HIGH>; 48 power-supply = <&vdd_5v0_io>; 49 backlight = <&backlight>; 50 }; 51 }; 52 }; 53 54 i2c@7000c400 { 55 backlight: backlight@2c { 56 compatible = "ti,lp8557"; 57 reg = <0x2c>; 58 59 dev-ctrl = /bits/ 8 <0x80>; 60 init-brt = /bits/ 8 <0xff>; 61 62 pwm-period = <29334>; 63 64 pwms = <&pwm 0 29334>; 65 pwm-names = "lp8557"; 66 67 /* 3 LED string */ 68 rom_14h { 69 rom-addr = /bits/ 8 <0x14>; 70 rom-val = /bits/ 8 <0x87>; 71 }; 72 73 /* boost frequency 1 MHz */ 74 rom_13h { 75 rom-addr = /bits/ 8 <0x13>; 76 rom-val = /bits/ 8 <0x01>; 77 }; 78 }; 79 }; 80}; 81