xref: /linux/arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l.dts (revision 6e7fd890f1d6ac83805409e9c346240de2705584)
1// SPDX-License-Identifier: (GPL-2.0 OR MIT)
2/*
3 * Copyright (C) 2023 Radxa Limited
4 * Copyright (C) 2024 Collabora Ltd.
5 *                    AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
6 */
7
8#include "mt8195.dtsi"
9#include "mt6359.dtsi"
10#include <dt-bindings/gpio/gpio.h>
11#include <dt-bindings/interrupt-controller/irq.h>
12#include <dt-bindings/pinctrl/mt8195-pinfunc.h>
13#include <dt-bindings/regulator/mediatek,mt6360-regulator.h>
14#include <dt-bindings/spmi/spmi.h>
15#include <dt-bindings/usb/pd.h>
16
17/ {
18	model = "Radxa NIO 12L";
19	chassis-type = "embedded";
20	compatible = "radxa,nio-12l", "mediatek,mt8395", "mediatek,mt8195";
21
22	aliases {
23		i2c0 = &i2c2;
24		i2c1 = &i2c3;
25		i2c2 = &i2c4;
26		i2c3 = &i2c0;
27		i2c4 = &i2c1;
28		ethernet0 = &eth;
29		serial0 = &uart0;
30		serial1 = &uart1;
31		spi0 = &spi1;
32		spi1 = &spi2;
33	};
34
35	chosen {
36		stdout-path = "serial0:921600n8";
37	};
38
39	firmware {
40		optee {
41			compatible = "linaro,optee-tz";
42			method = "smc";
43		};
44	};
45
46	memory@40000000 {
47		device_type = "memory";
48		reg = <0 0x40000000 0x1 0x0>;
49	};
50
51	wifi_vreg: regulator-wifi-3v3-en {
52		compatible = "regulator-fixed";
53		regulator-name = "wifi_3v3_en";
54		regulator-always-on;
55		regulator-min-microvolt = <3300000>;
56		regulator-max-microvolt = <3300000>;
57		enable-active-high;
58		gpio = <&pio 67 GPIO_ACTIVE_HIGH>;
59		pinctrl-names = "default";
60		pinctrl-0 = <&wifi_vreg_pins>;
61		vin-supply = <&vsys>;
62	};
63
64	/* system wide switching 5.0V power rail */
65	vsys: regulator-vsys {
66		compatible = "regulator-fixed";
67		regulator-name = "vsys";
68		regulator-always-on;
69		regulator-boot-on;
70		regulator-min-microvolt = <5000000>;
71		regulator-max-microvolt = <5000000>;
72		vin-supply = <&vcc5v0_vsys>;
73	};
74
75	vsys_buck: regulator-vsys-buck {
76		compatible = "regulator-fixed";
77		regulator-name = "vsys_buck";
78		regulator-always-on;
79		regulator-boot-on;
80		regulator-min-microvolt = <5000000>;
81		regulator-max-microvolt = <5000000>;
82		vin-supply = <&vcc5v0_vsys>;
83	};
84
85	/* Rail from power-only "TYPE C DC" port */
86	vcc5v0_vsys: regulator-vcc5v0-sys {
87		compatible = "regulator-fixed";
88		regulator-name = "vcc5v0_sys";
89		regulator-always-on;
90		regulator-boot-on;
91	};
92
93	reserved-memory {
94		#address-cells = <2>;
95		#size-cells = <2>;
96		ranges;
97
98		/*
99		 * 12 MiB reserved for OP-TEE (BL32)
100		 * +-----------------------+ 0x43e0_0000
101		 * |      SHMEM 2MiB       |
102		 * +-----------------------+ 0x43c0_0000
103		 * |        | TA_RAM  8MiB |
104		 * + TZDRAM +--------------+ 0x4340_0000
105		 * |        | TEE_RAM 2MiB |
106		 * +-----------------------+ 0x4320_0000
107		 */
108		optee_reserved: optee@43200000 {
109			reg = <0 0x43200000 0 0xc00000>;
110			no-map;
111		};
112
113		scp_mem: memory@50000000 {
114			compatible = "shared-dma-pool";
115			reg = <0 0x50000000 0 0x2900000>;
116			no-map;
117		};
118
119		vpu_mem: memory@53000000 {
120			compatible = "shared-dma-pool";
121			reg = <0 0x53000000 0 0x1400000>; /* 20 MB */
122		};
123
124		/* 2 MiB reserved for ARM Trusted Firmware (BL31) */
125		bl31_secmon_mem: memory@54600000 {
126			reg = <0 0x54600000 0x0 0x200000>;
127			no-map;
128		};
129
130		afe_mem: memory@60000000 {
131			compatible = "shared-dma-pool";
132			reg = <0 0x60000000 0 0x1100000>;
133			no-map;
134		};
135
136		apu_mem: memory@62000000 {
137			compatible = "shared-dma-pool";
138			reg = <0 0x62000000 0 0x1400000>; /* 20 MB */
139		};
140	};
141};
142
143&cpu0 {
144	cpu-supply = <&mt6359_vcore_buck_reg>;
145};
146
147&cpu1 {
148	cpu-supply = <&mt6359_vcore_buck_reg>;
149};
150
151&cpu2 {
152	cpu-supply = <&mt6359_vcore_buck_reg>;
153};
154
155&cpu3 {
156	cpu-supply = <&mt6359_vcore_buck_reg>;
157};
158
159&cpu4 {
160	cpu-supply = <&mt6315_6_vbuck1>;
161};
162
163&cpu5 {
164	cpu-supply = <&mt6315_6_vbuck1>;
165};
166
167&cpu6 {
168	cpu-supply = <&mt6315_6_vbuck1>;
169};
170
171&cpu7 {
172	cpu-supply = <&mt6315_6_vbuck1>;
173};
174
175&eth {
176	phy-mode = "rgmii-rxid";
177	phy-handle = <&rgmii_phy>;
178	pinctrl-names = "default", "sleep";
179	pinctrl-0 = <&eth_default_pins>;
180	pinctrl-1 = <&eth_sleep_pins>;
181	mediatek,tx-delay-ps = <2030>;
182	mediatek,mac-wol;
183	snps,reset-gpio = <&pio 93 GPIO_ACTIVE_HIGH>;
184	snps,reset-delays-us = <0 20000 100000>;
185	status = "okay";
186
187	mdio {
188		rgmii_phy: ethernet-phy@1 {
189			compatible = "ethernet-phy-id001c.c916";
190			reg = <0x1>;
191		};
192	};
193};
194
195&gpu {
196	mali-supply = <&mt6315_7_vbuck1>;
197	status = "okay";
198};
199
200&i2c2 {
201	clock-frequency = <400000>;
202	pinctrl-0 = <&i2c2_pins>;
203	pinctrl-names = "default";
204	status = "okay";
205
206	typec-mux@48 {
207		compatible = "ite,it5205";
208		reg = <0x48>;
209
210		mode-switch;
211		orientation-switch;
212
213		vcc-supply = <&mt6359_vibr_ldo_reg>;
214
215		port {
216			it5205_sbu_mux: endpoint {
217				remote-endpoint = <&typec_con_mux>;
218			};
219		};
220	};
221};
222
223&i2c4 {
224	clock-frequency = <400000>;
225	pinctrl-0 = <&i2c4_pins>;
226	pinctrl-names = "default";
227	status = "okay";
228
229	/* I2C4 exposed at 39-pins MIPI-LCD connector */
230};
231
232&i2c6 {
233	clock-frequency = <400000>;
234	pinctrl-0 = <&i2c6_pins>;
235	pinctrl-names = "default";
236	status = "okay";
237
238	mt6360: pmic@34 {
239		compatible = "mediatek,mt6360";
240		reg = <0x34>;
241		interrupts-extended = <&pio 101 IRQ_TYPE_EDGE_FALLING>;
242		interrupt-names = "IRQB";
243		interrupt-controller;
244		#interrupt-cells = <1>;
245		pinctrl-0 = <&mt6360_pins>;
246
247		charger {
248			compatible = "mediatek,mt6360-chg";
249			richtek,vinovp-microvolt = <14500000>;
250
251			otg_vbus_regulator: usb-otg-vbus-regulator {
252				regulator-name = "usb-otg-vbus";
253				regulator-min-microvolt = <4425000>;
254				regulator-max-microvolt = <5825000>;
255			};
256		};
257
258		regulator {
259			compatible = "mediatek,mt6360-regulator";
260			LDO_VIN1-supply = <&vsys_buck>;
261			LDO_VIN3-supply = <&mt6360_buck2>;
262
263			mt6360_buck1: buck1 {
264				regulator-name = "emi_vdd2";
265				regulator-min-microvolt = <300000>;
266				regulator-max-microvolt = <1300000>;
267				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
268							   MT6360_OPMODE_LP
269							   MT6360_OPMODE_ULP>;
270				regulator-always-on;
271			};
272
273			mt6360_buck2: buck2 {
274				regulator-name = "emi_vddq";
275				regulator-min-microvolt = <300000>;
276				regulator-max-microvolt = <1300000>;
277				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
278							   MT6360_OPMODE_LP
279							   MT6360_OPMODE_ULP>;
280				regulator-always-on;
281			};
282
283			mt6360_ldo1: ldo1 {
284				regulator-name = "ext_lcd_3v3";
285				regulator-min-microvolt = <3300000>;
286				regulator-max-microvolt = <3300000>;
287				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
288							   MT6360_OPMODE_LP>;
289				regulator-always-on;
290			};
291
292			mt6360_ldo2: ldo2 {
293				regulator-name = "panel1_p1v8";
294				regulator-min-microvolt = <1800000>;
295				regulator-max-microvolt = <1800000>;
296				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
297							   MT6360_OPMODE_LP>;
298			};
299
300			mt6360_ldo3: ldo3 {
301				regulator-name = "vmc_pmu";
302				regulator-min-microvolt = <1200000>;
303				regulator-max-microvolt = <3600000>;
304				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
305							   MT6360_OPMODE_LP>;
306			};
307
308			mt6360_ldo5: ldo5 {
309				regulator-name = "vmch_pmu";
310				regulator-min-microvolt = <3300000>;
311				regulator-max-microvolt = <3300000>;
312				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
313							   MT6360_OPMODE_LP>;
314				regulator-always-on;
315			};
316
317			mt6360_ldo6: ldo6 {
318				regulator-name = "mt6360_ldo6"; /* Test point */
319				regulator-min-microvolt = <500000>;
320				regulator-max-microvolt = <2100000>;
321				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
322							   MT6360_OPMODE_LP>;
323			};
324
325			mt6360_ldo7: ldo7 {
326				regulator-name = "emi_vmddr_en";
327				regulator-min-microvolt = <500000>;
328				regulator-max-microvolt = <2100000>;
329				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
330							   MT6360_OPMODE_LP>;
331				regulator-always-on;
332			};
333		};
334
335		typec {
336			compatible = "mediatek,mt6360-tcpc";
337			interrupts-extended = <&pio 100 IRQ_TYPE_LEVEL_LOW>;
338			interrupt-names = "PD_IRQB";
339
340			connector {
341				compatible = "usb-c-connector";
342				label = "USB-C";
343				data-role = "dual";
344				op-sink-microwatt = <10000000>;
345				power-role = "dual";
346				try-power-role = "sink";
347
348				source-pdos = <PDO_FIXED(5000, 1000,
349							 PDO_FIXED_DUAL_ROLE |
350							 PDO_FIXED_DATA_SWAP)>;
351				sink-pdos = <PDO_FIXED(5000, 3000,
352						       PDO_FIXED_DUAL_ROLE |
353						       PDO_FIXED_DATA_SWAP)>;
354
355				ports {
356					#address-cells = <1>;
357					#size-cells = <0>;
358
359					port@0 {
360						reg = <0>;
361						typec_con_hs: endpoint {
362							remote-endpoint = <&mtu3_hs0_role_sw>;
363						};
364					};
365
366					port@2 {
367						reg = <2>;
368						typec_con_mux: endpoint {
369							remote-endpoint = <&it5205_sbu_mux>;
370						};
371					};
372				};
373			};
374		};
375	};
376};
377
378&mfg0 {
379	domain-supply = <&mt6315_7_vbuck1>;
380};
381
382&mfg1 {
383	domain-supply = <&mt6359_vsram_others_ldo_reg>;
384};
385
386/* MMC0 Controller: eMMC (HS400). Power lines are shared with UFS! */
387&mmc0 {
388	pinctrl-names = "default", "state_uhs";
389	pinctrl-0 = <&mmc0_default_pins>;
390	pinctrl-1 = <&mmc0_uhs_pins>;
391	bus-width = <8>;
392	max-frequency = <200000000>;
393	hs400-ds-delay = <0x14c11>;
394	cap-mmc-highspeed;
395	cap-mmc-hw-reset;
396	mmc-hs200-1_8v;
397	mmc-hs400-1_8v;
398	no-sdio;
399	no-sd;
400	non-removable;
401	vmmc-supply = <&mt6359_vemc_1_ldo_reg>;
402	vqmmc-supply = <&mt6359_vufs_ldo_reg>;
403	status = "okay";
404};
405
406/* MMC1 Controller: MicroSD card slot */
407&mmc1 {
408	pinctrl-names = "default", "state_uhs";
409	pinctrl-0 = <&mmc1_default_pins>, <&mmc1_pins_detect>;
410	pinctrl-1 = <&mmc1_default_pins>;
411	bus-width = <4>;
412	max-frequency = <200000000>;
413	cap-sd-highspeed;
414	cd-gpios = <&pio 129 GPIO_ACTIVE_LOW>;
415	no-mmc;
416	no-sdio;
417	sd-uhs-sdr50;
418	sd-uhs-sdr104;
419	vmmc-supply = <&mt6360_ldo5>;
420	vqmmc-supply = <&mt6360_ldo3>;
421	status = "okay";
422};
423
424&mt6359_vaud18_ldo_reg {
425	regulator-always-on;
426};
427
428&mt6359_vbbck_ldo_reg {
429	regulator-always-on;
430};
431
432/* For USB Hub */
433&mt6359_vcamio_ldo_reg {
434	regulator-always-on;
435};
436
437&mt6359_vcn33_2_bt_ldo_reg {
438	regulator-min-microvolt = <3300000>;
439	regulator-max-microvolt = <3300000>;
440};
441
442&mt6359_vcore_buck_reg {
443	regulator-always-on;
444};
445
446&mt6359_vgpu11_buck_reg {
447	regulator-always-on;
448};
449
450&mt6359_vproc1_buck_reg {
451	regulator-always-on;
452};
453
454&mt6359_vproc2_buck_reg {
455	regulator-always-on;
456};
457
458&mt6359_vpu_buck_reg {
459	regulator-always-on;
460};
461
462&mt6359_vrf12_ldo_reg {
463	regulator-always-on;
464};
465
466&mt6359_vsram_md_ldo_reg {
467	regulator-always-on;
468};
469
470/* for GPU SRAM */
471&mt6359_vsram_others_ldo_reg {
472	regulator-min-microvolt = <750000>;
473	regulator-max-microvolt = <750000>;
474};
475
476&pio {
477	mediatek,rsel-resistance-in-si-unit;
478
479	eth_default_pins: eth-default-pins {
480		pins-cc {
481			pinmux = <PINMUX_GPIO85__FUNC_GBE_TXC>,
482				 <PINMUX_GPIO86__FUNC_GBE_RXC>,
483				 <PINMUX_GPIO87__FUNC_GBE_RXDV>,
484				 <PINMUX_GPIO88__FUNC_GBE_TXEN>;
485			drive-strength = <8>;
486		};
487
488		pins-mdio {
489			pinmux = <PINMUX_GPIO89__FUNC_GBE_MDC>,
490				 <PINMUX_GPIO90__FUNC_GBE_MDIO>;
491			input-enable;
492		};
493
494		pins-power {
495			pinmux = <PINMUX_GPIO91__FUNC_GPIO91>,
496				 <PINMUX_GPIO92__FUNC_GPIO92>;
497			output-high;
498		};
499
500		pins-rst {
501			pinmux = <PINMUX_GPIO93__FUNC_GPIO93>;
502		};
503
504		pins-rxd {
505			pinmux = <PINMUX_GPIO81__FUNC_GBE_RXD3>,
506				 <PINMUX_GPIO82__FUNC_GBE_RXD2>,
507				 <PINMUX_GPIO83__FUNC_GBE_RXD1>,
508				 <PINMUX_GPIO84__FUNC_GBE_RXD0>;
509		};
510
511		pins-txd {
512			pinmux = <PINMUX_GPIO77__FUNC_GBE_TXD3>,
513				 <PINMUX_GPIO78__FUNC_GBE_TXD2>,
514				 <PINMUX_GPIO79__FUNC_GBE_TXD1>,
515				 <PINMUX_GPIO80__FUNC_GBE_TXD0>;
516			drive-strength = <8>;
517		};
518	};
519
520	eth_sleep_pins: eth-sleep-pins {
521		pins-cc {
522			pinmux = <PINMUX_GPIO85__FUNC_GPIO85>,
523				 <PINMUX_GPIO86__FUNC_GPIO86>,
524				 <PINMUX_GPIO87__FUNC_GPIO87>,
525				 <PINMUX_GPIO88__FUNC_GPIO88>;
526		};
527
528		pins-mdio {
529			pinmux = <PINMUX_GPIO89__FUNC_GPIO89>,
530				 <PINMUX_GPIO90__FUNC_GPIO90>;
531			bias-disable;
532			input-disable;
533		};
534
535		pins-rxd {
536			pinmux = <PINMUX_GPIO81__FUNC_GPIO81>,
537				 <PINMUX_GPIO82__FUNC_GPIO82>,
538				 <PINMUX_GPIO83__FUNC_GPIO83>,
539				 <PINMUX_GPIO84__FUNC_GPIO84>;
540		};
541
542		pins-txd {
543			pinmux = <PINMUX_GPIO77__FUNC_GPIO77>,
544				 <PINMUX_GPIO78__FUNC_GPIO78>,
545				 <PINMUX_GPIO79__FUNC_GPIO79>,
546				 <PINMUX_GPIO80__FUNC_GPIO80>;
547		};
548	};
549
550	i2c2_pins: i2c2-pins {
551		pins-bus {
552			pinmux = <PINMUX_GPIO12__FUNC_SDA2>,
553				 <PINMUX_GPIO13__FUNC_SCL2>;
554			bias-pull-up = <1000>;
555			drive-strength = <6>;
556			drive-strength-microamp = <1000>;
557		};
558	};
559
560	i2c4_pins: i2c4-pins {
561		pins-bus {
562			pinmux = <PINMUX_GPIO16__FUNC_SDA4>,
563				 <PINMUX_GPIO17__FUNC_SCL4>;
564			bias-pull-up = <1000>;
565			drive-strength-microamp = <1000>;
566		};
567	};
568
569	i2c6_pins: i2c6-pins {
570		pins {
571			pinmux = <PINMUX_GPIO25__FUNC_SDA6>,
572				 <PINMUX_GPIO26__FUNC_SCL6>;
573			bias-disable;
574		};
575	};
576
577	mmc0_default_pins: mmc0-default-pins {
578		pins-clk {
579			pinmux = <PINMUX_GPIO122__FUNC_MSDC0_CLK>;
580			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
581			drive-strength = <6>;
582		};
583
584		pins-cmd-dat {
585			pinmux = <PINMUX_GPIO126__FUNC_MSDC0_DAT0>,
586				 <PINMUX_GPIO125__FUNC_MSDC0_DAT1>,
587				 <PINMUX_GPIO124__FUNC_MSDC0_DAT2>,
588				 <PINMUX_GPIO123__FUNC_MSDC0_DAT3>,
589				 <PINMUX_GPIO119__FUNC_MSDC0_DAT4>,
590				 <PINMUX_GPIO118__FUNC_MSDC0_DAT5>,
591				 <PINMUX_GPIO117__FUNC_MSDC0_DAT6>,
592				 <PINMUX_GPIO116__FUNC_MSDC0_DAT7>,
593				 <PINMUX_GPIO121__FUNC_MSDC0_CMD>;
594			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
595			drive-strength = <6>;
596			input-enable;
597		};
598
599		pins-rst {
600			pinmux = <PINMUX_GPIO120__FUNC_MSDC0_RSTB>;
601			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
602			drive-strength = <6>;
603		};
604	};
605
606	mmc0_uhs_pins: mmc0-uhs-pins {
607		pins-clk {
608			pinmux = <PINMUX_GPIO122__FUNC_MSDC0_CLK>;
609			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
610			drive-strength = <8>;
611		};
612
613		pins-cmd-dat {
614			pinmux = <PINMUX_GPIO126__FUNC_MSDC0_DAT0>,
615				 <PINMUX_GPIO125__FUNC_MSDC0_DAT1>,
616				 <PINMUX_GPIO124__FUNC_MSDC0_DAT2>,
617				 <PINMUX_GPIO123__FUNC_MSDC0_DAT3>,
618				 <PINMUX_GPIO119__FUNC_MSDC0_DAT4>,
619				 <PINMUX_GPIO118__FUNC_MSDC0_DAT5>,
620				 <PINMUX_GPIO117__FUNC_MSDC0_DAT6>,
621				 <PINMUX_GPIO116__FUNC_MSDC0_DAT7>,
622				 <PINMUX_GPIO121__FUNC_MSDC0_CMD>;
623			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
624			drive-strength = <8>;
625			input-enable;
626		};
627
628		pins-ds {
629			pinmux = <PINMUX_GPIO127__FUNC_MSDC0_DSL>;
630			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
631			drive-strength = <8>;
632		};
633
634		pins-rst {
635			pinmux = <PINMUX_GPIO120__FUNC_MSDC0_RSTB>;
636			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
637			drive-strength = <8>;
638		};
639	};
640
641	mmc1_default_pins: mmc1-default-pins {
642		pins-clk {
643			pinmux = <PINMUX_GPIO111__FUNC_MSDC1_CLK>;
644			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
645			drive-strength = <8>;
646		};
647
648		pins-cmd-dat {
649			pinmux = <PINMUX_GPIO110__FUNC_MSDC1_CMD>,
650				 <PINMUX_GPIO112__FUNC_MSDC1_DAT0>,
651				 <PINMUX_GPIO113__FUNC_MSDC1_DAT1>,
652				 <PINMUX_GPIO114__FUNC_MSDC1_DAT2>,
653				 <PINMUX_GPIO115__FUNC_MSDC1_DAT3>;
654			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
655			drive-strength = <8>;
656			input-enable;
657		};
658	};
659
660	mmc1_pins_detect: mmc1-detect-pins {
661		pins-insert {
662			pinmux = <PINMUX_GPIO129__FUNC_GPIO129>;
663			bias-pull-up;
664		};
665	};
666
667	mt6360_pins: mt6360-pins {
668		pins-irq {
669			pinmux = <PINMUX_GPIO100__FUNC_GPIO100>,
670				 <PINMUX_GPIO101__FUNC_GPIO101>;
671			input-enable;
672			bias-pull-up;
673		};
674	};
675
676	pcie0_default_pins: pcie0-default-pins {
677		pins-bus {
678			pinmux = <PINMUX_GPIO19__FUNC_WAKEN>,
679				 <PINMUX_GPIO20__FUNC_PERSTN>,
680				 <PINMUX_GPIO21__FUNC_CLKREQN>;
681			bias-pull-up;
682		};
683	};
684
685	pcie1_default_pins: pcie1-default-pins {
686		pins-bus {
687			pinmux = <PINMUX_GPIO0__FUNC_PERSTN_1>,
688				 <PINMUX_GPIO1__FUNC_CLKREQN_1>,
689				 <PINMUX_GPIO2__FUNC_WAKEN_1>;
690			bias-disable;
691		};
692	};
693
694	spi1_pins: spi1-default-pins {
695		pins-bus {
696			pinmux = <PINMUX_GPIO136__FUNC_SPIM1_CSB>,
697				 <PINMUX_GPIO137__FUNC_SPIM1_CLK>,
698				 <PINMUX_GPIO138__FUNC_SPIM1_MO>,
699				 <PINMUX_GPIO139__FUNC_SPIM1_MI>;
700			bias-disable;
701		};
702	};
703
704	spi2_pins: spi2-default-pins {
705		pins-bus {
706			pinmux = <PINMUX_GPIO140__FUNC_SPIM2_CSB>,
707				 <PINMUX_GPIO141__FUNC_SPIM2_CLK>,
708				 <PINMUX_GPIO142__FUNC_SPIM2_MO>,
709				 <PINMUX_GPIO143__FUNC_SPIM2_MI>;
710			bias-disable;
711		};
712	};
713
714	uart0_pins: uart0-pins {
715		pins-bus {
716			pinmux = <PINMUX_GPIO98__FUNC_UTXD0>,
717				 <PINMUX_GPIO99__FUNC_URXD0>;
718		};
719	};
720
721	uart1_pins: uart1-pins {
722		pins-bus {
723			pinmux = <PINMUX_GPIO102__FUNC_UTXD1>,
724				 <PINMUX_GPIO103__FUNC_URXD1>;
725		};
726	};
727
728	usb3_port0_pins: usb3p0-default-pins {
729		pins-vbus {
730			pinmux = <PINMUX_GPIO63__FUNC_VBUSVALID>;
731			input-enable;
732		};
733	};
734
735	usb2_port0_pins: usb2p0-default-pins {
736		pins-iddig {
737			pinmux = <PINMUX_GPIO130__FUNC_IDDIG_1P>;
738			input-enable;
739			bias-pull-up;
740		};
741
742		pins-vbus {
743			pinmux = <PINMUX_GPIO131__FUNC_USB_DRVVBUS_1P>;
744			output-low;
745		};
746	};
747
748	wifi_vreg_pins: wifi-vreg-pins {
749		pins-wifi-pmu-en {
750			pinmux = <PINMUX_GPIO65__FUNC_GPIO65>;
751			output-high;
752		};
753
754		pins-wifi-vreg-en {
755			pinmux = <PINMUX_GPIO67__FUNC_GPIO67>;
756		};
757	};
758};
759
760&pcie0 {
761	pinctrl-names = "default";
762	pinctrl-0 = <&pcie0_default_pins>;
763	status = "okay";
764};
765
766&pcie1 {
767	pinctrl-names = "default";
768	pinctrl-0 = <&pcie1_default_pins>;
769	status = "okay";
770};
771
772&pciephy {
773	status = "okay";
774};
775
776&pmic {
777	interrupts-extended = <&pio 222 IRQ_TYPE_LEVEL_HIGH>;
778};
779
780&scp {
781	memory-region = <&scp_mem>;
782	status = "okay";
783};
784
785&spi1 {
786	/* Exposed at 40 pin connector */
787	pinctrl-0 = <&spi1_pins>;
788	pinctrl-names = "default";
789	mediatek,pad-select = <0>;
790	#address-cells = <1>;
791	#size-cells = <0>;
792	status = "okay";
793};
794
795&spi2 {
796	/* Exposed at 40 pin connector */
797	pinctrl-0 = <&spi2_pins>;
798	pinctrl-names = "default";
799	mediatek,pad-select = <0>;
800	#address-cells = <1>;
801	#size-cells = <0>;
802	status = "okay";
803};
804
805&spmi {
806	#address-cells = <2>;
807	#size-cells = <0>;
808
809	mt6315_6: pmic@6 {
810		compatible = "mediatek,mt6315-regulator";
811		reg = <0x6 SPMI_USID>;
812
813		regulators {
814			mt6315_6_vbuck1: vbuck1 {
815				regulator-compatible = "vbuck1";
816				regulator-name = "Vbcpu";
817				regulator-min-microvolt = <300000>;
818				regulator-max-microvolt = <1193750>;
819				regulator-enable-ramp-delay = <256>;
820				regulator-allowed-modes = <0 1 2>;
821				regulator-always-on;
822			};
823		};
824	};
825
826	mt6315_7: pmic@7 {
827		compatible = "mediatek,mt6315-regulator";
828		reg = <0x7 SPMI_USID>;
829
830		regulators {
831			mt6315_7_vbuck1: vbuck1 {
832				regulator-compatible = "vbuck1";
833				regulator-name = "Vgpu";
834				regulator-min-microvolt = <300000>;
835				regulator-max-microvolt = <1193750>;
836				regulator-enable-ramp-delay = <256>;
837				regulator-allowed-modes = <0 1 2>;
838			};
839		};
840	};
841};
842
843&u3phy0 {
844	status = "okay";
845};
846
847&u3phy1 {
848	status = "okay";
849};
850
851&u3phy2 {
852	status = "okay";
853};
854
855&uart0 {
856	/* Exposed at 40 pin connector */
857	pinctrl-0 = <&uart0_pins>;
858	pinctrl-names = "default";
859	status = "okay";
860};
861
862&uart1 {
863	/* Exposed at 40 pin connector */
864	pinctrl-0 = <&uart1_pins>;
865	pinctrl-names = "default";
866	status = "okay";
867};
868
869&ssusb0 {
870	pinctrl-names = "default";
871	pinctrl-0 = <&usb3_port0_pins>;
872	role-switch-default-mode = "host";
873	usb-role-switch;
874	vusb33-supply = <&mt6359_vusb_ldo_reg>;
875	status = "okay";
876
877	port {
878		mtu3_hs0_role_sw: endpoint {
879			remote-endpoint = <&typec_con_hs>;
880		};
881	};
882};
883
884&ssusb2 {
885	pinctrl-names = "default";
886	pinctrl-0 = <&usb2_port0_pins>;
887	vusb33-supply = <&mt6359_vusb_ldo_reg>;
888	status = "okay";
889};
890
891&xhci0 {
892	vbus-supply = <&otg_vbus_regulator>;
893	status = "okay";
894};
895
896&xhci1 {
897	/* MT7921's USB Bluetooth has issues with USB2 LPM */
898	usb2-lpm-disable;
899	vusb33-supply = <&mt6359_vusb_ldo_reg>;
900	vbus-supply = <&vsys>;
901	status = "okay";
902};
903
904&xhci2 {
905	vbus-supply = <&vsys>;
906	status = "okay";
907};
908