xref: /linux/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts (revision 3a39d672e7f48b8d6b91a09afa4b55352773b4b5)

// SPDX-License-Identifier: (GPL-2.0 OR MIT)
/*
 * Copyright (C) 2023 MediaTek Inc.
 * Author: Ben Lok <ben.lok@mediatek.com>
 *	   Macpaul Lin <macpaul.lin@mediatek.com>
 */
/dts-v1/;

#include "mt8195.dtsi"
#include "mt6359.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/pinctrl/mt8195-pinfunc.h>
#include <dt-bindings/regulator/mediatek,mt6360-regulator.h>
#include <dt-bindings/spmi/spmi.h>
#include <dt-bindings/usb/pd.h>

/ {
	model = "MediaTek Genio 1200 EVK-P1V2-EMMC";
	compatible = "mediatek,mt8395-evk", "mediatek,mt8395",
		     "mediatek,mt8195";

	aliases {
		serial0 = &uart0;
		ethernet0 = &eth;
	};

	chosen {
		stdout-path = "serial0:921600n8";
	};

	firmware {
		optee {
			compatible = "linaro,optee-tz";
			method = "smc";
		};
	};

	memory@40000000 {
		device_type = "memory";
		reg = <0 0x40000000 0x2 0x00000000>;
	};

	reserved-memory {
		#address-cells = <2>;
		#size-cells = <2>;
		ranges;

		/*
		 * 12 MiB reserved for OP-TEE (BL32)
		 * +-----------------------+ 0x43e0_0000
		 * |      SHMEM 2MiB       |
		 * +-----------------------+ 0x43c0_0000
		 * |        | TA_RAM  8MiB |
		 * + TZDRAM +--------------+ 0x4340_0000
		 * |        | TEE_RAM 2MiB |
		 * +-----------------------+ 0x4320_0000
		 */
		optee_reserved: optee@43200000 {
			no-map;
			reg = <0 0x43200000 0 0x00c00000>;
		};

		scp_mem: memory@50000000 {
			compatible = "shared-dma-pool";
			reg = <0 0x50000000 0 0x2900000>;
			no-map;
		};

		vpu_mem: memory@53000000 {
			compatible = "shared-dma-pool";
			reg = <0 0x53000000 0 0x1400000>; /* 20 MB */
		};

		/* 2 MiB reserved for ARM Trusted Firmware (BL31) */
		bl31_secmon_mem: memory@54600000 {
			no-map;
			reg = <0 0x54600000 0x0 0x200000>;
		};

		snd_dma_mem: memory@60000000 {
			compatible = "shared-dma-pool";
			reg = <0 0x60000000 0 0x1100000>;
			no-map;
		};

		apu_mem: memory@62000000 {
			compatible = "shared-dma-pool";
			reg = <0 0x62000000 0 0x1400000>; /* 20 MB */
		};
	};

	backlight_lcd0: backlight-lcd0 {
		compatible = "pwm-backlight";
		pwms = <&disp_pwm0 0 500000>;
		enable-gpios = <&pio 47 GPIO_ACTIVE_HIGH>;
		brightness-levels = <0 1023>;
		num-interpolated-steps = <1023>;
		default-brightness-level = <576>;
	};

	backlight_lcd1: backlight-lcd1 {
		compatible = "pwm-backlight";
		pwms = <&disp_pwm1 0 500000>;
		enable-gpios = <&pio 46 GPIO_ACTIVE_HIGH>;
		brightness-levels = <0 1023>;
		num-interpolated-steps = <1023>;
		default-brightness-level = <576>;
	};

	can_clk: can-clk {
		compatible = "fixed-clock";
		#clock-cells = <0>;
		clock-frequency = <20000000>;
		clock-output-names = "can-clk";
	};

	edp_panel_fixed_3v3: regulator-0 {
		compatible = "regulator-fixed";
		regulator-name = "edp_panel_3v3";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		enable-active-high;
		gpio = <&pio 6 GPIO_ACTIVE_HIGH>;
		pinctrl-names = "default";
		pinctrl-0 = <&edp_panel_3v3_en_pins>;
	};

	edp_panel_fixed_12v: regulator-1 {
		compatible = "regulator-fixed";
		regulator-name = "edp_backlight_12v";
		regulator-min-microvolt = <12000000>;
		regulator-max-microvolt = <12000000>;
		enable-active-high;
		gpio = <&pio 96 GPIO_ACTIVE_HIGH>;
		pinctrl-names = "default";
		pinctrl-0 = <&edp_panel_12v_en_pins>;
	};

	keys: gpio-keys {
		compatible = "gpio-keys";

		button-volume-up {
			wakeup-source;
			debounce-interval = <100>;
			gpios = <&pio 106 GPIO_ACTIVE_LOW>;
			label = "volume_up";
			linux,code = <KEY_VOLUMEUP>;
		};
	};

	wifi_fixed_3v3: regulator-2 {
		compatible = "regulator-fixed";
		regulator-name = "wifi_3v3";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		gpio = <&pio 135 GPIO_ACTIVE_HIGH>;
		enable-active-high;
		regulator-always-on;
	};
};

&disp_pwm0 {
	pinctrl-names = "default";
	pinctrl-0 = <&pwm0_default_pins>;
	status = "okay";
};

&dmic_codec {
	wakeup-delay-ms = <200>;
};

&eth {
	phy-mode ="rgmii-rxid";
	phy-handle = <&eth_phy0>;
	snps,reset-gpio = <&pio 93 GPIO_ACTIVE_HIGH>;
	snps,reset-delays-us = <0 10000 10000>;
	mediatek,tx-delay-ps = <2030>;
	mediatek,mac-wol;
	pinctrl-names = "default", "sleep";
	pinctrl-0 = <&eth_default_pins>;
	pinctrl-1 = <&eth_sleep_pins>;
	status = "okay";

	mdio {
		compatible = "snps,dwmac-mdio";
		#address-cells = <1>;
		#size-cells = <0>;
		eth_phy0: eth-phy0@1 {
			compatible = "ethernet-phy-id001c.c916";
			reg = <0x1>;
		};
	};
};

&i2c0 {
	clock-frequency = <400000>;
	pinctrl-0 = <&i2c0_pins>;
	pinctrl-names = "default";
	status = "okay";
};

&i2c1 {
	clock-frequency = <400000>;
	pinctrl-0 = <&i2c1_pins>;
	pinctrl-names = "default";
	status = "okay";

	touchscreen@5d {
		compatible = "goodix,gt9271";
		reg = <0x5d>;
		interrupts-extended = <&pio 132 IRQ_TYPE_EDGE_RISING>;
		irq-gpios = <&pio 132 GPIO_ACTIVE_HIGH>;
		reset-gpios = <&pio 133 GPIO_ACTIVE_HIGH>;
		AVDD28-supply = <&mt6360_ldo1>;
		pinctrl-names = "default";
		pinctrl-0 = <&touch_pins>;
	};
};

&i2c2 {
	clock-frequency = <400000>;
	pinctrl-0 = <&i2c2_pins>;
	pinctrl-names = "default";
	status = "okay";
};

&i2c6 {
	clock-frequency = <400000>;
	pinctrl-0 = <&i2c6_pins>;
	pinctrl-names = "default";
	#address-cells = <1>;
	#size-cells = <0>;
	status = "okay";

	mt6360: pmic@34 {
		compatible = "mediatek,mt6360";
		reg = <0x34>;
		interrupt-parent = <&pio>;
		interrupts = <128 IRQ_TYPE_EDGE_FALLING>;
		interrupt-names = "IRQB";
		interrupt-controller;
		#interrupt-cells = <1>;
		pinctrl-0 = <&mt6360_pins>;

		charger {
			compatible = "mediatek,mt6360-chg";
			richtek,vinovp-microvolt = <14500000>;

			otg_vbus_regulator: usb-otg-vbus-regulator {
				regulator-name = "usb-otg-vbus";
				regulator-min-microvolt = <4425000>;
				regulator-max-microvolt = <5825000>;
			};
		};

		regulator {
			compatible = "mediatek,mt6360-regulator";
			LDO_VIN3-supply = <&mt6360_buck2>;

			mt6360_buck1: buck1 {
				regulator-name = "emi_vdd2";
				regulator-min-microvolt = <300000>;
				regulator-max-microvolt = <1300000>;
				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
							   MT6360_OPMODE_LP
							   MT6360_OPMODE_ULP>;
				regulator-always-on;
			};

			mt6360_buck2: buck2 {
				regulator-name = "emi_vddq";
				regulator-min-microvolt = <300000>;
				regulator-max-microvolt = <1300000>;
				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
							   MT6360_OPMODE_LP
							   MT6360_OPMODE_ULP>;
				regulator-always-on;
			};

			mt6360_ldo1: ldo1 {
				regulator-name = "tp1_p3v0";
				regulator-min-microvolt = <3300000>;
				regulator-max-microvolt = <3300000>;
				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
							   MT6360_OPMODE_LP>;
				regulator-always-on;
			};

			mt6360_ldo2: ldo2 {
				regulator-name = "panel1_p1v8";
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <1800000>;
				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
							   MT6360_OPMODE_LP>;
			};

			mt6360_ldo3: ldo3 {
				regulator-name = "vmc_pmu";
				regulator-min-microvolt = <1200000>;
				regulator-max-microvolt = <3600000>;
				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
							   MT6360_OPMODE_LP>;
			};

			mt6360_ldo5: ldo5 {
				regulator-name = "vmch_pmu";
				regulator-min-microvolt = <2700000>;
				regulator-max-microvolt = <3600000>;
				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
							   MT6360_OPMODE_LP>;
			};

			/* This is a measure point, which name is mt6360_ldo1 on schematic */
			mt6360_ldo6: ldo6 {
				regulator-name = "mt6360_ldo1";
				regulator-min-microvolt = <500000>;
				regulator-max-microvolt = <2100000>;
				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
							   MT6360_OPMODE_LP>;
			};

			mt6360_ldo7: ldo7 {
				regulator-name = "emi_vmddr_en";
				regulator-min-microvolt = <500000>;
				regulator-max-microvolt = <2100000>;
				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
							   MT6360_OPMODE_LP>;
				regulator-always-on;
			};
		};
	};
};

&mfg0 {
	domain-supply = <&mt6315_7_vbuck1>;
};

&mmc0 {
	status = "okay";
	pinctrl-names = "default", "state_uhs";
	pinctrl-0 = <&mmc0_default_pins>;
	pinctrl-1 = <&mmc0_uhs_pins>;
	bus-width = <8>;
	max-frequency = <200000000>;
	cap-mmc-highspeed;
	mmc-hs200-1_8v;
	mmc-hs400-1_8v;
	cap-mmc-hw-reset;
	no-sdio;
	no-sd;
	hs400-ds-delay = <0x14c11>;
	vmmc-supply = <&mt6359_vemc_1_ldo_reg>;
	vqmmc-supply = <&mt6359_vufs_ldo_reg>;
	non-removable;
};

&mmc1 {
	pinctrl-names = "default", "state_uhs";
	pinctrl-0 = <&mmc1_default_pins>;
	pinctrl-1 = <&mmc1_uhs_pins>;
	bus-width = <4>;
	max-frequency = <200000000>;
	cap-sd-highspeed;
	sd-uhs-sdr50;
	sd-uhs-sdr104;
	no-mmc;
	no-sdio;
	vmmc-supply = <&mt6360_ldo5>;
	vqmmc-supply = <&mt6360_ldo3>;
	status = "okay";
	non-removable;
};

&mt6359_vaud18_ldo_reg {
	regulator-always-on;
};

&mt6359_vbbck_ldo_reg {
	regulator-always-on;
};

/* For USB Hub */
&mt6359_vcamio_ldo_reg {
	regulator-always-on;
};

&mt6359_vcn33_2_bt_ldo_reg {
	regulator-min-microvolt = <3300000>;
	regulator-max-microvolt = <3300000>;
};

&mt6359_vcore_buck_reg {
	regulator-always-on;
};

&mt6359_vgpu11_buck_reg {
	regulator-always-on;
};

&mt6359_vpu_buck_reg {
	regulator-always-on;
};

&mt6359_vrf12_ldo_reg {
	regulator-always-on;
};

&mt6359codec {
	mediatek,mic-type-0 = <1>; /* ACC */
	mediatek,mic-type-1 = <3>; /* DCC */
	mediatek,mic-type-2 = <1>; /* ACC */
};

&pcie0 {
	pinctrl-names = "default", "idle";
	pinctrl-0 = <&pcie0_default_pins>;
	pinctrl-1 = <&pcie0_idle_pins>;
	status = "okay";
};

&pcie1 {
	pinctrl-names = "default";
	pinctrl-0 = <&pcie1_default_pins>;
	status = "disabled";
};

&pciephy {
	status = "okay";
};

&pio {
	audio_default_pins: audio-default-pins {
		pins-cmd-dat {
			pinmux = <PINMUX_GPIO61__FUNC_DMIC1_CLK>,
				 <PINMUX_GPIO62__FUNC_DMIC1_DAT>,
				 <PINMUX_GPIO65__FUNC_PCM_DO>,
				 <PINMUX_GPIO66__FUNC_PCM_CLK>,
				 <PINMUX_GPIO67__FUNC_PCM_DI>,
				 <PINMUX_GPIO68__FUNC_PCM_SYNC>,
				 <PINMUX_GPIO69__FUNC_AUD_CLK_MOSI>,
				 <PINMUX_GPIO70__FUNC_AUD_SYNC_MOSI>,
				 <PINMUX_GPIO71__FUNC_AUD_DAT_MOSI0>,
				 <PINMUX_GPIO72__FUNC_AUD_DAT_MOSI1>,
				 <PINMUX_GPIO73__FUNC_AUD_DAT_MISO0>,
				 <PINMUX_GPIO74__FUNC_AUD_DAT_MISO1>,
				 <PINMUX_GPIO75__FUNC_AUD_DAT_MISO2>;
		};
	};

	disp_pwm1_default_pins: disp-pwm1-default-pins {
		pins1 {
			pinmux = <PINMUX_GPIO104__FUNC_DISP_PWM1>;
		};
	};

	edp_panel_12v_en_pins: edp-panel-12v-en-pins {
		pins1 {
			pinmux = <PINMUX_GPIO96__FUNC_GPIO96>;
			output-high;
		};
	};

	edp_panel_3v3_en_pins: edp-panel-3v3-en-pins {
		pins1 {
			pinmux = <PINMUX_GPIO6__FUNC_GPIO6>;
			output-high;
		};
	};

	eth_default_pins: eth-default-pins {
		pins-cc {
			pinmux = <PINMUX_GPIO85__FUNC_GBE_TXC>,
				 <PINMUX_GPIO86__FUNC_GBE_RXC>,
				 <PINMUX_GPIO87__FUNC_GBE_RXDV>,
				 <PINMUX_GPIO88__FUNC_GBE_TXEN>;
			drive-strength = <8>;
		};

		pins-mdio {
			pinmux = <PINMUX_GPIO89__FUNC_GBE_MDC>,
				 <PINMUX_GPIO90__FUNC_GBE_MDIO>;
			input-enable;
		};

		pins-power {
			pinmux = <PINMUX_GPIO91__FUNC_GPIO91>,
				 <PINMUX_GPIO92__FUNC_GPIO92>;
			output-high;
		};

		pins-rxd {
			pinmux = <PINMUX_GPIO81__FUNC_GBE_RXD3>,
				 <PINMUX_GPIO82__FUNC_GBE_RXD2>,
				 <PINMUX_GPIO83__FUNC_GBE_RXD1>,
				 <PINMUX_GPIO84__FUNC_GBE_RXD0>;
		};

		pins-txd {
			pinmux = <PINMUX_GPIO77__FUNC_GBE_TXD3>,
				 <PINMUX_GPIO78__FUNC_GBE_TXD2>,
				 <PINMUX_GPIO79__FUNC_GBE_TXD1>,
				 <PINMUX_GPIO80__FUNC_GBE_TXD0>;
			drive-strength = <8>;
		};
	};

	eth_sleep_pins: eth-sleep-pins {
		pins-cc {
			pinmux = <PINMUX_GPIO85__FUNC_GPIO85>,
				 <PINMUX_GPIO86__FUNC_GPIO86>,
				 <PINMUX_GPIO87__FUNC_GPIO87>,
				 <PINMUX_GPIO88__FUNC_GPIO88>;
		};

		pins-mdio {
			pinmux = <PINMUX_GPIO89__FUNC_GPIO89>,
				 <PINMUX_GPIO90__FUNC_GPIO90>;
			input-disable;
			bias-disable;
		};

		pins-rxd {
			pinmux = <PINMUX_GPIO81__FUNC_GPIO81>,
				 <PINMUX_GPIO82__FUNC_GPIO82>,
				 <PINMUX_GPIO83__FUNC_GPIO83>,
				 <PINMUX_GPIO84__FUNC_GPIO84>;
		};

		pins-txd {
			pinmux = <PINMUX_GPIO77__FUNC_GPIO77>,
				 <PINMUX_GPIO78__FUNC_GPIO78>,
				 <PINMUX_GPIO79__FUNC_GPIO79>,
				 <PINMUX_GPIO80__FUNC_GPIO80>;
		};
	};

	gpio_key_pins: gpio-keys-pins {
		pins {
			pinmux = <PINMUX_GPIO106__FUNC_GPIO106>;
			bias-pull-up;
			input-enable;
		};
	};

	i2c0_pins: i2c0-pins {
		pins {
			pinmux = <PINMUX_GPIO8__FUNC_SDA0>,
				 <PINMUX_GPIO9__FUNC_SCL0>;
			bias-pull-up = <MTK_PULL_SET_RSEL_111>;
			drive-strength-microamp = <1000>;
		};
	};

	i2c1_pins: i2c1-pins {
		pins {
			pinmux = <PINMUX_GPIO10__FUNC_SDA1>,
				 <PINMUX_GPIO11__FUNC_SCL1>;
			bias-pull-up = <MTK_PULL_SET_RSEL_111>;
			drive-strength-microamp = <1000>;
		};
	};

	i2c2_pins: i2c2-pins {
		pins {
			pinmux = <PINMUX_GPIO12__FUNC_SDA2>,
				 <PINMUX_GPIO13__FUNC_SCL2>;
			bias-pull-up = <MTK_PULL_SET_RSEL_111>;
			drive-strength = <6>;
		};
	};

	i2c6_pins: i2c6-pins {
		pins {
			pinmux = <PINMUX_GPIO25__FUNC_SDA6>,
				 <PINMUX_GPIO26__FUNC_SCL6>;
			bias-pull-up;
		};
	};

	mmc0_default_pins: mmc0-default-pins {
		pins-clk {
			pinmux = <PINMUX_GPIO122__FUNC_MSDC0_CLK>;
			drive-strength = <6>;
			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
		};

		pins-cmd-dat {
			pinmux = <PINMUX_GPIO126__FUNC_MSDC0_DAT0>,
				 <PINMUX_GPIO125__FUNC_MSDC0_DAT1>,
				 <PINMUX_GPIO124__FUNC_MSDC0_DAT2>,
				 <PINMUX_GPIO123__FUNC_MSDC0_DAT3>,
				 <PINMUX_GPIO119__FUNC_MSDC0_DAT4>,
				 <PINMUX_GPIO118__FUNC_MSDC0_DAT5>,
				 <PINMUX_GPIO117__FUNC_MSDC0_DAT6>,
				 <PINMUX_GPIO116__FUNC_MSDC0_DAT7>,
				 <PINMUX_GPIO121__FUNC_MSDC0_CMD>;
			input-enable;
			drive-strength = <6>;
			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
		};

		pins-rst {
			pinmux = <PINMUX_GPIO120__FUNC_MSDC0_RSTB>;
			drive-strength = <6>;
			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
		};
	};

	mmc0_uhs_pins: mmc0-uhs-pins {
		pins-clk {
			pinmux = <PINMUX_GPIO122__FUNC_MSDC0_CLK>;
			drive-strength = <8>;
			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
		};

		pins-cmd-dat {
			pinmux = <PINMUX_GPIO126__FUNC_MSDC0_DAT0>,
				 <PINMUX_GPIO125__FUNC_MSDC0_DAT1>,
				 <PINMUX_GPIO124__FUNC_MSDC0_DAT2>,
				 <PINMUX_GPIO123__FUNC_MSDC0_DAT3>,
				 <PINMUX_GPIO119__FUNC_MSDC0_DAT4>,
				 <PINMUX_GPIO118__FUNC_MSDC0_DAT5>,
				 <PINMUX_GPIO117__FUNC_MSDC0_DAT6>,
				 <PINMUX_GPIO116__FUNC_MSDC0_DAT7>,
				 <PINMUX_GPIO121__FUNC_MSDC0_CMD>;
			input-enable;
			drive-strength = <8>;
			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
		};

		pins-ds {
			pinmux = <PINMUX_GPIO127__FUNC_MSDC0_DSL>;
			drive-strength = <8>;
			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
		};

		pins-rst {
			pinmux = <PINMUX_GPIO120__FUNC_MSDC0_RSTB>;
			drive-strength = <8>;
			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
		};
	};

	mmc1_default_pins: mmc1-default-pins {
		pins-clk {
			pinmux = <PINMUX_GPIO111__FUNC_MSDC1_CLK>;
			drive-strength = <8>;
			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
		};

		pins-cmd-dat {
			pinmux = <PINMUX_GPIO110__FUNC_MSDC1_CMD>,
				 <PINMUX_GPIO112__FUNC_MSDC1_DAT0>,
				 <PINMUX_GPIO113__FUNC_MSDC1_DAT1>,
				 <PINMUX_GPIO114__FUNC_MSDC1_DAT2>,
				 <PINMUX_GPIO115__FUNC_MSDC1_DAT3>;
			input-enable;
			drive-strength = <8>;
			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
		};
	};

	mmc1_uhs_pins: mmc1-uhs-pins {
		pins-clk {
			pinmux = <PINMUX_GPIO111__FUNC_MSDC1_CLK>;
			drive-strength = <8>;
			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
		};

		pins-cmd-dat {
			pinmux = <PINMUX_GPIO110__FUNC_MSDC1_CMD>,
				 <PINMUX_GPIO112__FUNC_MSDC1_DAT0>,
				 <PINMUX_GPIO113__FUNC_MSDC1_DAT1>,
				 <PINMUX_GPIO114__FUNC_MSDC1_DAT2>,
				 <PINMUX_GPIO115__FUNC_MSDC1_DAT3>;
			input-enable;
			drive-strength = <8>;
			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
		};
	};

	mt6360_pins: mt6360-pins {
		pins {
			pinmux = <PINMUX_GPIO17__FUNC_GPIO17>,
				 <PINMUX_GPIO128__FUNC_GPIO128>;
			input-enable;
			bias-pull-up;
		};
	};

	pcie0_default_pins: pcie0-default-pins {
		pins {
			pinmux = <PINMUX_GPIO19__FUNC_WAKEN>,
				 <PINMUX_GPIO20__FUNC_PERSTN>,
				 <PINMUX_GPIO21__FUNC_CLKREQN>;
			bias-pull-up;
		};
	};

	pcie0_idle_pins: pcie0-idle-pins {
		pins {
			pinmux = <PINMUX_GPIO20__FUNC_GPIO20>;
			bias-disable;
			output-low;
		};
	};

	pcie1_default_pins: pcie1-default-pins {
		pins {
			pinmux = <PINMUX_GPIO22__FUNC_PERSTN_1>,
				 <PINMUX_GPIO23__FUNC_CLKREQN_1>,
				 <PINMUX_GPIO24__FUNC_WAKEN_1>;
			bias-pull-up;
		};
	};

	pwm0_default_pins: pwm0-default-pins {
		pins-cmd-dat {
			pinmux = <PINMUX_GPIO97__FUNC_DISP_PWM0>;
		};
	};

	spi1_pins: spi1-pins {
		pins {
			pinmux = <PINMUX_GPIO136__FUNC_SPIM1_CSB>,
				 <PINMUX_GPIO137__FUNC_SPIM1_CLK>,
				 <PINMUX_GPIO138__FUNC_SPIM1_MO>,
				 <PINMUX_GPIO139__FUNC_SPIM1_MI>;
			bias-disable;
		};
	};

	spi2_pins: spi-pins {
		pins {
			pinmux = <PINMUX_GPIO140__FUNC_SPIM2_CSB>,
				 <PINMUX_GPIO141__FUNC_SPIM2_CLK>,
				 <PINMUX_GPIO142__FUNC_SPIM2_MO>,
				 <PINMUX_GPIO143__FUNC_SPIM2_MI>;
			bias-disable;
		};
	};

	touch_pins: touch-pins {
		pins-irq {
			pinmux = <PINMUX_GPIO132__FUNC_GPIO132>;
			input-enable;
			bias-disable;
		};

		pins-reset {
			pinmux = <PINMUX_GPIO133__FUNC_GPIO133>;
			output-high;
		};
	};

	uart0_pins: uart0-pins {
		pins {
			pinmux = <PINMUX_GPIO98__FUNC_UTXD0>,
				 <PINMUX_GPIO99__FUNC_URXD0>;
		};
	};

	uart1_pins: uart1-pins {
		pins {
			pinmux = <PINMUX_GPIO100__FUNC_URTS1>,
				 <PINMUX_GPIO101__FUNC_UCTS1>,
				 <PINMUX_GPIO102__FUNC_UTXD1>,
				 <PINMUX_GPIO103__FUNC_URXD1>;
		};
	};
};

&pmic {
	interrupts-extended = <&pio 222 IRQ_TYPE_LEVEL_HIGH>;
};

&scp {
	memory-region = <&scp_mem>;
	status = "okay";
};

&spi1 {
	pinctrl-0 = <&spi1_pins>;
	pinctrl-names = "default";
	mediatek,pad-select = <0>;
	#address-cells = <1>;
	#size-cells = <0>;
	status = "okay";
	cs-gpios = <&pio 64 GPIO_ACTIVE_LOW>;

	can0: can@0 {
		compatible = "microchip,mcp2518fd";
		reg = <0>;
		clocks = <&can_clk>;
		spi-max-frequency = <20000000>;
		interrupts-extended = <&pio 16 IRQ_TYPE_LEVEL_LOW>;
		vdd-supply = <&mt6359_vcn33_2_bt_ldo_reg>;
		xceiver-supply = <&mt6359_vcn33_2_bt_ldo_reg>;
	};
};

&spi2 {
	pinctrl-0 = <&spi2_pins>;
	pinctrl-names = "default";
	mediatek,pad-select = <0>;
	#address-cells = <1>;
	#size-cells = <0>;
	status = "okay";
};

&spmi {
	#address-cells = <2>;
	#size-cells = <0>;

	mt6315_6: pmic@6 {
		compatible = "mediatek,mt6315-regulator";
		reg = <0x6 SPMI_USID>;

		regulators {
			mt6315_6_vbuck1: vbuck1 {
				regulator-compatible = "vbuck1";
				regulator-name = "Vbcpu";
				regulator-min-microvolt = <300000>;
				regulator-max-microvolt = <1193750>;
				regulator-enable-ramp-delay = <256>;
				regulator-allowed-modes = <0 1 2>;
				regulator-always-on;
			};
		};
	};

	mt6315_7: pmic@7 {
		compatible = "mediatek,mt6315-regulator";
		reg = <0x7 SPMI_USID>;

		regulators {
			mt6315_7_vbuck1: vbuck1 {
				regulator-compatible = "vbuck1";
				regulator-name = "Vgpu";
				regulator-min-microvolt = <300000>;
				regulator-max-microvolt = <1193750>;
				regulator-enable-ramp-delay = <256>;
				regulator-allowed-modes = <0 1 2>;
			};
		};
	};
};

&u3phy0 {
	status = "okay";
};

&u3phy1 {
	status = "okay";

	u3port1: usb-phy@700 {
		mediatek,force-mode;
	};
};

&u3phy2 {
	status = "okay";
};

&u3phy3 {
	status = "okay";
};

&uart0 {
	pinctrl-0 = <&uart0_pins>;
	pinctrl-names = "default";
	status = "okay";
};

&uart1 {
	pinctrl-0 = <&uart1_pins>;
	pinctrl-names = "default";
	status = "okay";
};

&ufsphy {
	status = "disabled";
};

&ssusb0 {
	vusb33-supply = <&mt6359_vusb_ldo_reg>;
	status = "okay";
};

&ssusb2 {
	vusb33-supply = <&mt6359_vusb_ldo_reg>;
	status = "okay";
};

&ssusb3 {
	vusb33-supply = <&mt6359_vusb_ldo_reg>;
	status = "okay";
};

&xhci0 {
	status = "okay";
};

&xhci1 {
	vusb33-supply = <&mt6359_vusb_ldo_reg>;
	status = "okay";
};

&xhci2 {
	status = "okay";
};

&xhci3 {
	status = "okay";
};