1// SPDX-License-Identifier: (GPL-2.0 OR MIT) 2/* 3 * Copyright (C) 2023 MediaTek Inc. 4 * Author: Chris Chen <chris-qj.chen@mediatek.com> 5 * Pablo Sun <pablo.sun@mediatek.com> 6 * Macpaul Lin <macpaul.lin@mediatek.com> 7 */ 8/dts-v1/; 9 10#include "mt8188.dtsi" 11#include "mt6359.dtsi" 12#include <dt-bindings/gpio/gpio.h> 13#include <dt-bindings/input/input.h> 14#include <dt-bindings/interrupt-controller/irq.h> 15#include <dt-bindings/pinctrl/mediatek,mt8188-pinfunc.h> 16#include <dt-bindings/regulator/mediatek,mt6360-regulator.h> 17#include <dt-bindings/spmi/spmi.h> 18#include <dt-bindings/usb/pd.h> 19 20/ { 21 model = "MediaTek Genio-700 EVK"; 22 compatible = "mediatek,mt8390-evk", "mediatek,mt8390", 23 "mediatek,mt8188"; 24 25 aliases { 26 serial0 = &uart0; 27 }; 28 29 chosen { 30 stdout-path = "serial0:921600n8"; 31 }; 32 33 firmware { 34 optee { 35 compatible = "linaro,optee-tz"; 36 method = "smc"; 37 }; 38 }; 39 40 memory@40000000 { 41 device_type = "memory"; 42 reg = <0 0x40000000 0x2 0x00000000>; 43 }; 44 45 reserved-memory { 46 #address-cells = <2>; 47 #size-cells = <2>; 48 ranges; 49 50 /* 51 * 12 MiB reserved for OP-TEE (BL32) 52 * +-----------------------+ 0x43e0_0000 53 * | SHMEM 2MiB | 54 * +-----------------------+ 0x43c0_0000 55 * | | TA_RAM 8MiB | 56 * + TZDRAM +--------------+ 0x4340_0000 57 * | | TEE_RAM 2MiB | 58 * +-----------------------+ 0x4320_0000 59 */ 60 optee_reserved: optee@43200000 { 61 no-map; 62 reg = <0 0x43200000 0 0x00c00000>; 63 }; 64 65 scp_mem: memory@50000000 { 66 compatible = "shared-dma-pool"; 67 reg = <0 0x50000000 0 0x2900000>; 68 no-map; 69 }; 70 71 /* 2 MiB reserved for ARM Trusted Firmware (BL31) */ 72 bl31_secmon_reserved: memory@54600000 { 73 no-map; 74 reg = <0 0x54600000 0x0 0x200000>; 75 }; 76 77 apu_mem: memory@55000000 { 78 compatible = "shared-dma-pool"; 79 reg = <0 0x55000000 0 0x1400000>; /* 20 MB */ 80 }; 81 82 vpu_mem: memory@57000000 { 83 compatible = "shared-dma-pool"; 84 reg = <0 0x57000000 0 0x1400000>; /* 20 MB */ 85 }; 86 }; 87 88 common_fixed_5v: regulator-0 { 89 compatible = "regulator-fixed"; 90 regulator-name = "5v_en"; 91 regulator-min-microvolt = <5000000>; 92 regulator-max-microvolt = <5000000>; 93 gpio = <&pio 10 GPIO_ACTIVE_HIGH>; 94 enable-active-high; 95 regulator-always-on; 96 }; 97 98 edp_panel_fixed_3v3: regulator-1 { 99 compatible = "regulator-fixed"; 100 regulator-name = "edp_panel_3v3"; 101 regulator-min-microvolt = <3300000>; 102 regulator-max-microvolt = <3300000>; 103 enable-active-high; 104 gpio = <&pio 15 GPIO_ACTIVE_HIGH>; 105 pinctrl-names = "default"; 106 pinctrl-0 = <&edp_panel_3v3_en_pins>; 107 }; 108 109 gpio_fixed_3v3: regulator-2 { 110 compatible = "regulator-fixed"; 111 regulator-name = "gpio_3v3_en"; 112 regulator-min-microvolt = <3300000>; 113 regulator-max-microvolt = <3300000>; 114 gpio = <&pio 9 GPIO_ACTIVE_HIGH>; 115 enable-active-high; 116 regulator-always-on; 117 }; 118 119 sdio_fixed_1v8: regulator-3 { 120 compatible = "regulator-fixed"; 121 regulator-name = "sdio_io"; 122 regulator-min-microvolt = <1800000>; 123 regulator-max-microvolt = <1800000>; 124 enable-active-high; 125 regulator-always-on; 126 }; 127 128 sdio_fixed_3v3: regulator-4 { 129 compatible = "regulator-fixed"; 130 regulator-name = "sdio_card"; 131 regulator-min-microvolt = <3300000>; 132 regulator-max-microvolt = <3300000>; 133 gpio = <&pio 74 GPIO_ACTIVE_HIGH>; 134 enable-active-high; 135 regulator-always-on; 136 }; 137 138 touch0_fixed_3v3: regulator-5 { 139 compatible = "regulator-fixed"; 140 regulator-name = "touch_3v3"; 141 regulator-min-microvolt = <3300000>; 142 regulator-max-microvolt = <3300000>; 143 gpio = <&pio 119 GPIO_ACTIVE_HIGH>; 144 enable-active-high; 145 }; 146 147 usb_hub_fixed_3v3: regulator-6 { 148 compatible = "regulator-fixed"; 149 regulator-name = "usb_hub_3v3"; 150 regulator-min-microvolt = <3300000>; 151 regulator-max-microvolt = <3300000>; 152 gpio = <&pio 112 GPIO_ACTIVE_HIGH>; /* HUB_3V3_EN */ 153 startup-delay-us = <10000>; 154 enable-active-high; 155 }; 156 157 usb_hub_reset_1v8: regulator-7 { 158 compatible = "regulator-fixed"; 159 regulator-name = "usb_hub_reset"; 160 regulator-min-microvolt = <1800000>; 161 regulator-max-microvolt = <1800000>; 162 gpio = <&pio 7 GPIO_ACTIVE_HIGH>; /* HUB_RESET */ 163 vin-supply = <&usb_hub_fixed_3v3>; 164 }; 165 166 usb_p0_vbus: regulator-8 { 167 compatible = "regulator-fixed"; 168 regulator-name = "usb_p0_vbus"; 169 regulator-min-microvolt = <5000000>; 170 regulator-max-microvolt = <5000000>; 171 gpio = <&pio 84 GPIO_ACTIVE_HIGH>; 172 enable-active-high; 173 }; 174 175 usb_p1_vbus: regulator-9 { 176 compatible = "regulator-fixed"; 177 regulator-name = "usb_p1_vbus"; 178 regulator-min-microvolt = <5000000>; 179 regulator-max-microvolt = <5000000>; 180 gpio = <&pio 87 GPIO_ACTIVE_HIGH>; 181 enable-active-high; 182 }; 183 184 usb_p2_vbus: regulator-10 { 185 compatible = "regulator-fixed"; 186 regulator-name = "usb_p2_vbus"; 187 regulator-min-microvolt = <5000000>; 188 regulator-max-microvolt = <5000000>; 189 enable-active-high; 190 }; 191}; 192 193&i2c0 { 194 pinctrl-names = "default"; 195 pinctrl-0 = <&i2c0_pins>; 196 clock-frequency = <400000>; 197 status = "okay"; 198 199 touchscreen@5d { 200 compatible = "goodix,gt9271"; 201 reg = <0x5d>; 202 interrupt-parent = <&pio>; 203 interrupts-extended = <&pio 6 IRQ_TYPE_EDGE_RISING>; 204 irq-gpios = <&pio 6 GPIO_ACTIVE_HIGH>; 205 reset-gpios = <&pio 5 GPIO_ACTIVE_HIGH>; 206 AVDD28-supply = <&touch0_fixed_3v3>; 207 VDDIO-supply = <&mt6359_vio18_ldo_reg>; 208 pinctrl-names = "default"; 209 pinctrl-0 = <&touch_pins>; 210 }; 211}; 212 213&i2c1 { 214 pinctrl-names = "default"; 215 pinctrl-0 = <&i2c1_pins>; 216 clock-frequency = <400000>; 217 status = "okay"; 218}; 219 220&i2c2 { 221 pinctrl-names = "default"; 222 pinctrl-0 = <&i2c2_pins>; 223 clock-frequency = <400000>; 224 status = "okay"; 225}; 226 227&i2c3 { 228 pinctrl-names = "default"; 229 pinctrl-0 = <&i2c3_pins>; 230 clock-frequency = <400000>; 231 status = "okay"; 232}; 233 234&i2c4 { 235 pinctrl-names = "default"; 236 pinctrl-0 = <&i2c4_pins>; 237 pinctrl-1 = <&rt1715_int_pins>; 238 clock-frequency = <1000000>; 239 status = "okay"; 240}; 241 242&i2c5 { 243 pinctrl-names = "default"; 244 pinctrl-0 = <&i2c5_pins>; 245 clock-frequency = <400000>; 246 status = "okay"; 247}; 248 249&i2c6 { 250 pinctrl-names = "default"; 251 pinctrl-0 = <&i2c6_pins>; 252 clock-frequency = <400000>; 253 status = "okay"; 254}; 255 256&mmc0 { 257 status = "okay"; 258 pinctrl-names = "default", "state_uhs"; 259 pinctrl-0 = <&mmc0_default_pins>; 260 pinctrl-1 = <&mmc0_uhs_pins>; 261 bus-width = <8>; 262 max-frequency = <200000000>; 263 cap-mmc-highspeed; 264 mmc-hs200-1_8v; 265 mmc-hs400-1_8v; 266 supports-cqe; 267 cap-mmc-hw-reset; 268 no-sdio; 269 no-sd; 270 hs400-ds-delay = <0x1481b>; 271 vmmc-supply = <&mt6359_vemc_1_ldo_reg>; 272 vqmmc-supply = <&mt6359_vufs_ldo_reg>; 273 non-removable; 274}; 275 276&mmc1 { 277 status = "okay"; 278 pinctrl-names = "default", "state_uhs"; 279 pinctrl-0 = <&mmc1_default_pins>; 280 pinctrl-1 = <&mmc1_uhs_pins>; 281 bus-width = <4>; 282 max-frequency = <200000000>; 283 cap-sd-highspeed; 284 sd-uhs-sdr50; 285 sd-uhs-sdr104; 286 no-mmc; 287 no-sdio; 288 cd-gpios = <&pio 2 GPIO_ACTIVE_LOW>; 289 vmmc-supply = <&mt6359_vpa_buck_reg>; 290 vqmmc-supply = <&mt6359_vsim1_ldo_reg>; 291}; 292 293&mt6359_vbbck_ldo_reg { 294 regulator-always-on; 295}; 296 297&mt6359_vcn18_ldo_reg { 298 regulator-always-on; 299}; 300 301&mt6359_vcn33_2_bt_ldo_reg { 302 regulator-always-on; 303}; 304 305&mt6359_vcore_buck_reg { 306 regulator-always-on; 307}; 308 309&mt6359_vgpu11_buck_reg { 310 regulator-always-on; 311}; 312 313&mt6359_vpa_buck_reg { 314 regulator-max-microvolt = <3100000>; 315}; 316 317&mt6359_vpu_buck_reg { 318 regulator-always-on; 319}; 320 321&mt6359_vrf12_ldo_reg { 322 regulator-always-on; 323}; 324 325&mt6359_vsim1_ldo_reg { 326 regulator-enable-ramp-delay = <480>; 327}; 328 329&mt6359_vufs_ldo_reg { 330 regulator-always-on; 331}; 332 333&mt6359codec { 334 mediatek,mic-type-0 = <1>; /* ACC */ 335 mediatek,mic-type-1 = <3>; /* DCC */ 336}; 337 338&pio { 339 audio_default_pins: audio-default-pins { 340 pins-cmd-dat { 341 pinmux = <PINMUX_GPIO101__FUNC_O_AUD_CLK_MOSI>, 342 <PINMUX_GPIO102__FUNC_O_AUD_SYNC_MOSI>, 343 <PINMUX_GPIO103__FUNC_O_AUD_DAT_MOSI0>, 344 <PINMUX_GPIO104__FUNC_O_AUD_DAT_MOSI1>, 345 <PINMUX_GPIO105__FUNC_I0_AUD_DAT_MISO0>, 346 <PINMUX_GPIO106__FUNC_I0_AUD_DAT_MISO1>, 347 <PINMUX_GPIO107__FUNC_B0_I2SIN_MCK>, 348 <PINMUX_GPIO108__FUNC_B0_I2SIN_BCK>, 349 <PINMUX_GPIO109__FUNC_B0_I2SIN_WS>, 350 <PINMUX_GPIO110__FUNC_I0_I2SIN_D0>, 351 <PINMUX_GPIO114__FUNC_O_I2SO2_MCK>, 352 <PINMUX_GPIO115__FUNC_B0_I2SO2_BCK>, 353 <PINMUX_GPIO116__FUNC_B0_I2SO2_WS>, 354 <PINMUX_GPIO117__FUNC_O_I2SO2_D0>, 355 <PINMUX_GPIO118__FUNC_O_I2SO2_D1>, 356 <PINMUX_GPIO121__FUNC_B0_PCM_CLK>, 357 <PINMUX_GPIO122__FUNC_B0_PCM_SYNC>, 358 <PINMUX_GPIO124__FUNC_I0_PCM_DI>, 359 <PINMUX_GPIO125__FUNC_O_DMIC1_CLK>, 360 <PINMUX_GPIO126__FUNC_I0_DMIC1_DAT>, 361 <PINMUX_GPIO128__FUNC_O_DMIC2_CLK>, 362 <PINMUX_GPIO129__FUNC_I0_DMIC2_DAT>; 363 }; 364 }; 365 366 dptx_pins: dptx-pins { 367 pins-cmd-dat { 368 pinmux = <PINMUX_GPIO46__FUNC_I0_DP_TX_HPD>; 369 bias-pull-up; 370 }; 371 }; 372 373 edp_panel_3v3_en_pins: edp-panel-3v3-en-pins { 374 pins1 { 375 pinmux = <PINMUX_GPIO15__FUNC_B_GPIO15>; 376 output-high; 377 }; 378 }; 379 380 eth_default_pins: eth-default-pins { 381 pins-cc { 382 pinmux = <PINMUX_GPIO139__FUNC_B0_GBE_TXC>, 383 <PINMUX_GPIO140__FUNC_I0_GBE_RXC>, 384 <PINMUX_GPIO141__FUNC_I0_GBE_RXDV>, 385 <PINMUX_GPIO142__FUNC_O_GBE_TXEN>; 386 drive-strength = <8>; 387 }; 388 389 pins-mdio { 390 pinmux = <PINMUX_GPIO143__FUNC_O_GBE_MDC>, 391 <PINMUX_GPIO144__FUNC_B1_GBE_MDIO>; 392 drive-strength = <8>; 393 input-enable; 394 }; 395 396 pins-power { 397 pinmux = <PINMUX_GPIO145__FUNC_B_GPIO145>, 398 <PINMUX_GPIO146__FUNC_B_GPIO146>; 399 output-high; 400 }; 401 402 pins-rxd { 403 pinmux = <PINMUX_GPIO135__FUNC_I0_GBE_RXD3>, 404 <PINMUX_GPIO136__FUNC_I0_GBE_RXD2>, 405 <PINMUX_GPIO137__FUNC_I0_GBE_RXD1>, 406 <PINMUX_GPIO138__FUNC_I0_GBE_RXD0>; 407 drive-strength = <8>; 408 }; 409 410 pins-txd { 411 pinmux = <PINMUX_GPIO131__FUNC_O_GBE_TXD3>, 412 <PINMUX_GPIO132__FUNC_O_GBE_TXD2>, 413 <PINMUX_GPIO133__FUNC_O_GBE_TXD1>, 414 <PINMUX_GPIO134__FUNC_O_GBE_TXD0>; 415 drive-strength = <8>; 416 }; 417 }; 418 419 eth_sleep_pins: eth-sleep-pins { 420 pins-cc { 421 pinmux = <PINMUX_GPIO139__FUNC_B_GPIO139>, 422 <PINMUX_GPIO140__FUNC_B_GPIO140>, 423 <PINMUX_GPIO141__FUNC_B_GPIO141>, 424 <PINMUX_GPIO142__FUNC_B_GPIO142>; 425 }; 426 427 pins-mdio { 428 pinmux = <PINMUX_GPIO143__FUNC_B_GPIO143>, 429 <PINMUX_GPIO144__FUNC_B_GPIO144>; 430 input-disable; 431 bias-disable; 432 }; 433 434 pins-rxd { 435 pinmux = <PINMUX_GPIO135__FUNC_B_GPIO135>, 436 <PINMUX_GPIO136__FUNC_B_GPIO136>, 437 <PINMUX_GPIO137__FUNC_B_GPIO137>, 438 <PINMUX_GPIO138__FUNC_B_GPIO138>; 439 }; 440 441 pins-txd { 442 pinmux = <PINMUX_GPIO131__FUNC_B_GPIO131>, 443 <PINMUX_GPIO132__FUNC_B_GPIO132>, 444 <PINMUX_GPIO133__FUNC_B_GPIO133>, 445 <PINMUX_GPIO134__FUNC_B_GPIO134>; 446 }; 447 }; 448 449 i2c0_pins: i2c0-pins { 450 pins { 451 pinmux = <PINMUX_GPIO56__FUNC_B1_SDA0>, 452 <PINMUX_GPIO55__FUNC_B1_SCL0>; 453 bias-pull-up = <MTK_PULL_SET_RSEL_011>; 454 drive-strength-microamp = <1000>; 455 }; 456 }; 457 458 i2c1_pins: i2c1-pins { 459 pins { 460 pinmux = <PINMUX_GPIO58__FUNC_B1_SDA1>, 461 <PINMUX_GPIO57__FUNC_B1_SCL1>; 462 bias-pull-up = <MTK_PULL_SET_RSEL_011>; 463 drive-strength-microamp = <1000>; 464 }; 465 }; 466 467 i2c2_pins: i2c2-pins { 468 pins { 469 pinmux = <PINMUX_GPIO60__FUNC_B1_SDA2>, 470 <PINMUX_GPIO59__FUNC_B1_SCL2>; 471 bias-pull-up = <MTK_PULL_SET_RSEL_011>; 472 drive-strength-microamp = <1000>; 473 }; 474 }; 475 476 i2c3_pins: i2c3-pins { 477 pins { 478 pinmux = <PINMUX_GPIO62__FUNC_B1_SDA3>, 479 <PINMUX_GPIO61__FUNC_B1_SCL3>; 480 bias-pull-up = <MTK_PULL_SET_RSEL_011>; 481 drive-strength-microamp = <1000>; 482 }; 483 }; 484 485 i2c4_pins: i2c4-pins { 486 pins { 487 pinmux = <PINMUX_GPIO64__FUNC_B1_SDA4>, 488 <PINMUX_GPIO63__FUNC_B1_SCL4>; 489 bias-pull-up = <MTK_PULL_SET_RSEL_011>; 490 drive-strength-microamp = <1000>; 491 }; 492 }; 493 494 i2c5_pins: i2c5-pins { 495 pins { 496 pinmux = <PINMUX_GPIO66__FUNC_B1_SDA5>, 497 <PINMUX_GPIO65__FUNC_B1_SCL5>; 498 bias-pull-up = <MTK_PULL_SET_RSEL_011>; 499 drive-strength-microamp = <1000>; 500 }; 501 }; 502 503 i2c6_pins: i2c6-pins { 504 pins { 505 pinmux = <PINMUX_GPIO68__FUNC_B1_SDA6>, 506 <PINMUX_GPIO67__FUNC_B1_SCL6>; 507 bias-pull-up = <MTK_PULL_SET_RSEL_011>; 508 drive-strength-microamp = <1000>; 509 }; 510 }; 511 512 gpio_key_pins: gpio-key-pins { 513 pins { 514 pinmux = <PINMUX_GPIO42__FUNC_B1_KPCOL0>, 515 <PINMUX_GPIO43__FUNC_B1_KPCOL1>, 516 <PINMUX_GPIO44__FUNC_B1_KPROW0>; 517 }; 518 }; 519 520 mmc0_default_pins: mmc0-default-pins { 521 pins-clk { 522 pinmux = <PINMUX_GPIO157__FUNC_B1_MSDC0_CLK>; 523 drive-strength = <6>; 524 bias-pull-down = <MTK_PUPD_SET_R1R0_10>; 525 }; 526 527 pins-cmd-dat { 528 pinmux = <PINMUX_GPIO161__FUNC_B1_MSDC0_DAT0>, 529 <PINMUX_GPIO160__FUNC_B1_MSDC0_DAT1>, 530 <PINMUX_GPIO159__FUNC_B1_MSDC0_DAT2>, 531 <PINMUX_GPIO158__FUNC_B1_MSDC0_DAT3>, 532 <PINMUX_GPIO154__FUNC_B1_MSDC0_DAT4>, 533 <PINMUX_GPIO153__FUNC_B1_MSDC0_DAT5>, 534 <PINMUX_GPIO152__FUNC_B1_MSDC0_DAT6>, 535 <PINMUX_GPIO151__FUNC_B1_MSDC0_DAT7>, 536 <PINMUX_GPIO156__FUNC_B1_MSDC0_CMD>; 537 input-enable; 538 drive-strength = <6>; 539 bias-pull-up = <MTK_PUPD_SET_R1R0_01>; 540 }; 541 542 pins-rst { 543 pinmux = <PINMUX_GPIO155__FUNC_O_MSDC0_RSTB>; 544 drive-strength = <6>; 545 bias-pull-up = <MTK_PUPD_SET_R1R0_01>; 546 }; 547 }; 548 549 mmc0_uhs_pins: mmc0-uhs-pins { 550 pins-clk { 551 pinmux = <PINMUX_GPIO157__FUNC_B1_MSDC0_CLK>; 552 drive-strength = <8>; 553 bias-pull-down = <MTK_PUPD_SET_R1R0_10>; 554 }; 555 556 pins-cmd-dat { 557 pinmux = <PINMUX_GPIO161__FUNC_B1_MSDC0_DAT0>, 558 <PINMUX_GPIO160__FUNC_B1_MSDC0_DAT1>, 559 <PINMUX_GPIO159__FUNC_B1_MSDC0_DAT2>, 560 <PINMUX_GPIO158__FUNC_B1_MSDC0_DAT3>, 561 <PINMUX_GPIO154__FUNC_B1_MSDC0_DAT4>, 562 <PINMUX_GPIO153__FUNC_B1_MSDC0_DAT5>, 563 <PINMUX_GPIO152__FUNC_B1_MSDC0_DAT6>, 564 <PINMUX_GPIO151__FUNC_B1_MSDC0_DAT7>, 565 <PINMUX_GPIO156__FUNC_B1_MSDC0_CMD>; 566 input-enable; 567 drive-strength = <8>; 568 bias-pull-up = <MTK_PUPD_SET_R1R0_01>; 569 }; 570 571 pins-ds { 572 pinmux = <PINMUX_GPIO162__FUNC_B0_MSDC0_DSL>; 573 drive-strength = <8>; 574 bias-pull-down = <MTK_PUPD_SET_R1R0_10>; 575 }; 576 577 pins-rst { 578 pinmux = <PINMUX_GPIO155__FUNC_O_MSDC0_RSTB>; 579 drive-strength = <8>; 580 bias-pull-up = <MTK_PUPD_SET_R1R0_01>; 581 }; 582 }; 583 584 mmc1_default_pins: mmc1-default-pins { 585 pins-clk { 586 pinmux = <PINMUX_GPIO164__FUNC_B1_MSDC1_CLK>; 587 drive-strength = <6>; 588 bias-pull-down = <MTK_PUPD_SET_R1R0_10>; 589 }; 590 591 pins-cmd-dat { 592 pinmux = <PINMUX_GPIO163__FUNC_B1_MSDC1_CMD>, 593 <PINMUX_GPIO165__FUNC_B1_MSDC1_DAT0>, 594 <PINMUX_GPIO166__FUNC_B1_MSDC1_DAT1>, 595 <PINMUX_GPIO167__FUNC_B1_MSDC1_DAT2>, 596 <PINMUX_GPIO168__FUNC_B1_MSDC1_DAT3>; 597 input-enable; 598 drive-strength = <6>; 599 bias-pull-up = <MTK_PUPD_SET_R1R0_01>; 600 }; 601 602 pins-insert { 603 pinmux = <PINMUX_GPIO2__FUNC_B_GPIO2>; 604 bias-pull-up; 605 }; 606 }; 607 608 mmc1_uhs_pins: mmc1-uhs-pins { 609 pins-clk { 610 pinmux = <PINMUX_GPIO164__FUNC_B1_MSDC1_CLK>; 611 drive-strength = <6>; 612 bias-pull-down = <MTK_PUPD_SET_R1R0_10>; 613 }; 614 615 pins-cmd-dat { 616 pinmux = <PINMUX_GPIO163__FUNC_B1_MSDC1_CMD>, 617 <PINMUX_GPIO165__FUNC_B1_MSDC1_DAT0>, 618 <PINMUX_GPIO166__FUNC_B1_MSDC1_DAT1>, 619 <PINMUX_GPIO167__FUNC_B1_MSDC1_DAT2>, 620 <PINMUX_GPIO168__FUNC_B1_MSDC1_DAT3>; 621 input-enable; 622 drive-strength = <6>; 623 bias-pull-up = <MTK_PUPD_SET_R1R0_01>; 624 }; 625 }; 626 627 mmc2_default_pins: mmc2-default-pins { 628 pins-clk { 629 pinmux = <PINMUX_GPIO170__FUNC_B1_MSDC2_CLK>; 630 drive-strength = <4>; 631 bias-pull-down = <MTK_PUPD_SET_R1R0_10>; 632 }; 633 634 pins-cmd-dat { 635 pinmux = <PINMUX_GPIO169__FUNC_B1_MSDC2_CMD>, 636 <PINMUX_GPIO171__FUNC_B1_MSDC2_DAT0>, 637 <PINMUX_GPIO172__FUNC_B1_MSDC2_DAT1>, 638 <PINMUX_GPIO173__FUNC_B1_MSDC2_DAT2>, 639 <PINMUX_GPIO174__FUNC_B1_MSDC2_DAT3>; 640 input-enable; 641 drive-strength = <6>; 642 bias-pull-up = <MTK_PUPD_SET_R1R0_01>; 643 }; 644 645 pins-pcm { 646 pinmux = <PINMUX_GPIO123__FUNC_O_PCM_DO>; 647 }; 648 }; 649 650 mmc2_uhs_pins: mmc2-uhs-pins { 651 pins-clk { 652 pinmux = <PINMUX_GPIO170__FUNC_B1_MSDC2_CLK>; 653 drive-strength = <4>; 654 bias-pull-down = <MTK_PUPD_SET_R1R0_10>; 655 }; 656 657 pins-cmd-dat { 658 pinmux = <PINMUX_GPIO169__FUNC_B1_MSDC2_CMD>, 659 <PINMUX_GPIO171__FUNC_B1_MSDC2_DAT0>, 660 <PINMUX_GPIO172__FUNC_B1_MSDC2_DAT1>, 661 <PINMUX_GPIO173__FUNC_B1_MSDC2_DAT2>, 662 <PINMUX_GPIO174__FUNC_B1_MSDC2_DAT3>; 663 input-enable; 664 drive-strength = <6>; 665 bias-pull-up = <MTK_PUPD_SET_R1R0_01>; 666 }; 667 }; 668 669 mmc2_eint_pins: mmc2-eint-pins { 670 pins-dat1 { 671 pinmux = <PINMUX_GPIO172__FUNC_B_GPIO172>; 672 input-enable; 673 bias-pull-up = <MTK_PUPD_SET_R1R0_01>; 674 }; 675 }; 676 677 mmc2_dat1_pins: mmc2-dat1-pins { 678 pins-dat1 { 679 pinmux = <PINMUX_GPIO172__FUNC_B1_MSDC2_DAT1>; 680 input-enable; 681 drive-strength = <6>; 682 bias-pull-up = <MTK_PUPD_SET_R1R0_01>; 683 }; 684 }; 685 686 panel_default_pins: panel-default-pins { 687 pins-dcdc { 688 pinmux = <PINMUX_GPIO45__FUNC_B_GPIO45>; 689 output-low; 690 }; 691 692 pins-en { 693 pinmux = <PINMUX_GPIO111__FUNC_B_GPIO111>; 694 output-low; 695 }; 696 697 pins-rst { 698 pinmux = <PINMUX_GPIO25__FUNC_B_GPIO25>; 699 output-high; 700 }; 701 }; 702 703 rt1715_int_pins: rt1715-int-pins { 704 pins_cmd0_dat { 705 pinmux = <PINMUX_GPIO12__FUNC_B_GPIO12>; 706 bias-pull-up; 707 input-enable; 708 }; 709 }; 710 711 spi0_pins: spi0-pins { 712 pins-spi { 713 pinmux = <PINMUX_GPIO69__FUNC_O_SPIM0_CSB>, 714 <PINMUX_GPIO70__FUNC_O_SPIM0_CLK>, 715 <PINMUX_GPIO71__FUNC_B0_SPIM0_MOSI>, 716 <PINMUX_GPIO72__FUNC_B0_SPIM0_MISO>; 717 bias-disable; 718 }; 719 }; 720 721 spi1_pins: spi1-pins { 722 pins-spi { 723 pinmux = <PINMUX_GPIO75__FUNC_O_SPIM1_CSB>, 724 <PINMUX_GPIO76__FUNC_O_SPIM1_CLK>, 725 <PINMUX_GPIO77__FUNC_B0_SPIM1_MOSI>, 726 <PINMUX_GPIO78__FUNC_B0_SPIM1_MISO>; 727 bias-disable; 728 }; 729 }; 730 731 spi2_pins: spi2-pins { 732 pins-spi { 733 pinmux = <PINMUX_GPIO79__FUNC_O_SPIM2_CSB>, 734 <PINMUX_GPIO80__FUNC_O_SPIM2_CLK>, 735 <PINMUX_GPIO81__FUNC_B0_SPIM2_MOSI>, 736 <PINMUX_GPIO82__FUNC_B0_SPIM2_MISO>; 737 bias-disable; 738 }; 739 }; 740 741 touch_pins: touch-pins { 742 pins-irq { 743 pinmux = <PINMUX_GPIO6__FUNC_B_GPIO6>; 744 input-enable; 745 bias-disable; 746 }; 747 748 pins-reset { 749 pinmux = <PINMUX_GPIO5__FUNC_B_GPIO5>; 750 output-high; 751 }; 752 }; 753 754 uart0_pins: uart0-pins { 755 pins { 756 pinmux = <PINMUX_GPIO31__FUNC_O_UTXD0>, 757 <PINMUX_GPIO32__FUNC_I1_URXD0>; 758 bias-pull-up; 759 }; 760 }; 761 762 uart1_pins: uart1-pins { 763 pins { 764 pinmux = <PINMUX_GPIO33__FUNC_O_UTXD1>, 765 <PINMUX_GPIO34__FUNC_I1_URXD1>; 766 bias-pull-up; 767 }; 768 }; 769 770 uart2_pins: uart2-pins { 771 pins { 772 pinmux = <PINMUX_GPIO35__FUNC_O_UTXD2>, 773 <PINMUX_GPIO36__FUNC_I1_URXD2>; 774 bias-pull-up; 775 }; 776 }; 777 778 usb_default_pins: usb-default-pins { 779 pins-iddig { 780 pinmux = <PINMUX_GPIO83__FUNC_B_GPIO83>; 781 input-enable; 782 bias-pull-up; 783 }; 784 785 pins-valid { 786 pinmux = <PINMUX_GPIO85__FUNC_I0_VBUSVALID>; 787 input-enable; 788 }; 789 790 pins-vbus { 791 pinmux = <PINMUX_GPIO84__FUNC_O_USB_DRVVBUS>; 792 output-high; 793 }; 794 795 }; 796 797 usb1_default_pins: usb1-default-pins { 798 pins-valid { 799 pinmux = <PINMUX_GPIO88__FUNC_I0_VBUSVALID_1P>; 800 input-enable; 801 }; 802 803 pins-usb-hub-3v3-en { 804 pinmux = <PINMUX_GPIO112__FUNC_B_GPIO112>; 805 output-high; 806 }; 807 }; 808 809 wifi_pwrseq_pins: wifi-pwrseq-pins { 810 pins-wifi-enable { 811 pinmux = <PINMUX_GPIO127__FUNC_B_GPIO127>; 812 output-low; 813 }; 814 }; 815}; 816 817&pmic { 818 interrupt-parent = <&pio>; 819 interrupts = <222 IRQ_TYPE_LEVEL_HIGH>; 820}; 821 822&scp { 823 memory-region = <&scp_mem>; 824 status = "okay"; 825}; 826 827&uart0 { 828 pinctrl-0 = <&uart0_pins>; 829 pinctrl-names = "default"; 830 status = "okay"; 831}; 832 833&uart1 { 834 pinctrl-0 = <&uart1_pins>; 835 pinctrl-names = "default"; 836 status = "okay"; 837}; 838 839&uart2 { 840 pinctrl-0 = <&uart2_pins>; 841 pinctrl-names = "default"; 842 status = "okay"; 843}; 844 845&spi2 { 846 pinctrl-0 = <&spi2_pins>; 847 pinctrl-names = "default"; 848 mediatek,pad-select = <0>; 849 #address-cells = <1>; 850 #size-cells = <0>; 851 status = "okay"; 852}; 853 854&u3phy0 { 855 status = "okay"; 856}; 857 858&u3phy1 { 859 status = "okay"; 860}; 861 862&u3phy2 { 863 status = "okay"; 864}; 865 866&xhci0 { 867 status = "okay"; 868 vusb33-supply = <&mt6359_vusb_ldo_reg>; 869}; 870 871&xhci1 { 872 status = "okay"; 873 vusb33-supply = <&mt6359_vusb_ldo_reg>; 874 vbus-supply = <&usb_hub_reset_1v8>; 875}; 876 877&xhci2 { 878 status = "okay"; 879 vusb33-supply = <&mt6359_vusb_ldo_reg>; 880}; 881