xref: /linux/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts (revision c532de5a67a70f8533d495f8f2aaa9a0491c3ad0) 
1/*
2 * Copyright (c) 2018 MediaTek Inc.
3 * Author: Ryder Lee <ryder.lee@mediatek.com>
4 *
5 * SPDX-License-Identifier: (GPL-2.0 OR MIT)
6 */
7
8/dts-v1/;
9#include <dt-bindings/input/input.h>
10#include <dt-bindings/gpio/gpio.h>
11#include <dt-bindings/leds/common.h>
12
13#include "mt7622.dtsi"
14#include "mt6380.dtsi"
15
16/ {
17	model = "Bananapi BPI-R64";
18	chassis-type = "embedded";
19	compatible = "bananapi,bpi-r64", "mediatek,mt7622";
20
21	aliases {
22		serial0 = &uart0;
23	};
24
25	chosen {
26		stdout-path = "serial0:115200n8";
27		bootargs = "earlycon=uart8250,mmio32,0x11002000 swiotlb=512";
28	};
29
30	cpus {
31		cpu@0 {
32			proc-supply = <&mt6380_vcpu_reg>;
33			sram-supply = <&mt6380_vm_reg>;
34		};
35
36		cpu@1 {
37			proc-supply = <&mt6380_vcpu_reg>;
38			sram-supply = <&mt6380_vm_reg>;
39		};
40	};
41
42	gpio-keys {
43		compatible = "gpio-keys";
44
45		factory-key {
46			label = "factory";
47			linux,code = <BTN_0>;
48			gpios = <&pio 0 GPIO_ACTIVE_HIGH>;
49		};
50
51		wps-key {
52			label = "wps";
53			linux,code = <KEY_WPS_BUTTON>;
54			gpios = <&pio 102 GPIO_ACTIVE_LOW>;
55		};
56	};
57
58	leds {
59		compatible = "gpio-leds";
60
61		led-0 {
62			label = "bpi-r64:pio:green";
63			color = <LED_COLOR_ID_GREEN>;
64			gpios = <&pio 89 GPIO_ACTIVE_HIGH>;
65			default-state = "off";
66		};
67
68		led-1 {
69			label = "bpi-r64:pio:red";
70			color = <LED_COLOR_ID_RED>;
71			gpios = <&pio 88 GPIO_ACTIVE_HIGH>;
72			default-state = "off";
73		};
74	};
75
76	memory@40000000 {
77		reg = <0 0x40000000 0 0x40000000>;
78		device_type = "memory";
79	};
80
81	reg_1p8v: regulator-1p8v {
82		compatible = "regulator-fixed";
83		regulator-name = "fixed-1.8V";
84		regulator-min-microvolt = <1800000>;
85		regulator-max-microvolt = <1800000>;
86		regulator-always-on;
87	};
88
89	reg_3p3v: regulator-3p3v {
90		compatible = "regulator-fixed";
91		regulator-name = "fixed-3.3V";
92		regulator-min-microvolt = <3300000>;
93		regulator-max-microvolt = <3300000>;
94		regulator-boot-on;
95		regulator-always-on;
96	};
97
98	reg_5v: regulator-5v {
99		compatible = "regulator-fixed";
100		regulator-name = "fixed-5V";
101		regulator-min-microvolt = <5000000>;
102		regulator-max-microvolt = <5000000>;
103		regulator-boot-on;
104		regulator-always-on;
105	};
106};
107
108&bch {
109	status = "disabled";
110};
111
112&btif {
113	status = "okay";
114};
115
116&cir {
117	pinctrl-names = "default";
118	pinctrl-0 = <&irrx_pins>;
119	status = "okay";
120};
121
122&eth {
123	status = "okay";
124	gmac0: mac@0 {
125		compatible = "mediatek,eth-mac";
126		reg = <0>;
127		phy-mode = "2500base-x";
128
129		fixed-link {
130			speed = <2500>;
131			full-duplex;
132			pause;
133		};
134	};
135
136	gmac1: mac@1 {
137		compatible = "mediatek,eth-mac";
138		reg = <1>;
139		phy-mode = "rgmii";
140
141		fixed-link {
142			speed = <1000>;
143			full-duplex;
144			pause;
145		};
146	};
147
148	mdio: mdio-bus {
149		#address-cells = <1>;
150		#size-cells = <0>;
151
152		switch@1f {
153			compatible = "mediatek,mt7531";
154			reg = <0x1f>;
155			interrupt-controller;
156			#interrupt-cells = <1>;
157			interrupts-extended = <&pio 53 IRQ_TYPE_LEVEL_HIGH>;
158			reset-gpios = <&pio 54 0>;
159
160			ports {
161				#address-cells = <1>;
162				#size-cells = <0>;
163
164				port@0 {
165					reg = <0>;
166					label = "wan";
167				};
168
169				port@1 {
170					reg = <1>;
171					label = "lan0";
172				};
173
174				port@2 {
175					reg = <2>;
176					label = "lan1";
177				};
178
179				port@3 {
180					reg = <3>;
181					label = "lan2";
182				};
183
184				port@4 {
185					reg = <4>;
186					label = "lan3";
187				};
188
189				port@5 {
190					reg = <5>;
191					ethernet = <&gmac1>;
192					phy-mode = "rgmii";
193
194					fixed-link {
195						speed = <1000>;
196						full-duplex;
197						pause;
198					};
199				};
200
201				port@6 {
202					reg = <6>;
203					label = "cpu";
204					ethernet = <&gmac0>;
205					phy-mode = "2500base-x";
206
207					fixed-link {
208						speed = <2500>;
209						full-duplex;
210						pause;
211					};
212				};
213			};
214		};
215
216	};
217};
218
219&i2c1 {
220	pinctrl-names = "default";
221	pinctrl-0 = <&i2c1_pins>;
222	status = "okay";
223};
224
225&i2c2 {
226	pinctrl-names = "default";
227	pinctrl-0 = <&i2c2_pins>;
228	status = "okay";
229};
230
231&mmc0 {
232	pinctrl-names = "default", "state_uhs";
233	pinctrl-0 = <&emmc_pins_default>;
234	pinctrl-1 = <&emmc_pins_uhs>;
235	status = "okay";
236	bus-width = <8>;
237	max-frequency = <50000000>;
238	cap-mmc-highspeed;
239	mmc-hs200-1_8v;
240	vmmc-supply = <&reg_3p3v>;
241	vqmmc-supply = <&reg_1p8v>;
242	assigned-clocks = <&topckgen CLK_TOP_MSDC30_0_SEL>;
243	assigned-clock-parents = <&topckgen CLK_TOP_UNIV48M>;
244	non-removable;
245};
246
247&mmc1 {
248	pinctrl-names = "default", "state_uhs";
249	pinctrl-0 = <&sd0_pins_default>;
250	pinctrl-1 = <&sd0_pins_uhs>;
251	status = "okay";
252	bus-width = <4>;
253	max-frequency = <50000000>;
254	cap-sd-highspeed;
255	cd-gpios = <&pio 81 GPIO_ACTIVE_LOW>;
256	vmmc-supply = <&reg_3p3v>;
257	vqmmc-supply = <&reg_3p3v>;
258	assigned-clocks = <&topckgen CLK_TOP_MSDC30_1_SEL>;
259	assigned-clock-parents = <&topckgen CLK_TOP_UNIV48M>;
260};
261
262&nandc {
263	pinctrl-names = "default";
264	pinctrl-0 = <&parallel_nand_pins>;
265	status = "disabled";
266};
267
268&bch {
269	status = "okay";
270};
271
272&snfi {
273	pinctrl-names = "default";
274	pinctrl-0 = <&serial_nand_pins>;
275	status = "okay";
276	flash@0 {
277		compatible = "spi-nand";
278		reg = <0>;
279		spi-tx-bus-width = <4>;
280		spi-rx-bus-width = <4>;
281		nand-ecc-engine = <&snfi>;
282		partitions {
283			compatible = "fixed-partitions";
284			#address-cells = <1>;
285			#size-cells = <1>;
286
287			partition@0 {
288				label = "bl2";
289				reg = <0x0 0x80000>;
290				read-only;
291			};
292
293			partition@80000 {
294				label = "fip";
295				reg = <0x80000 0x200000>;
296				read-only;
297			};
298
299			ubi: partition@280000 {
300				label = "ubi";
301				reg = <0x280000 0x7d80000>;
302			};
303		};
304	};
305};
306
307&pcie0 {
308	pinctrl-names = "default";
309	pinctrl-0 = <&pcie0_pins>;
310	status = "okay";
311};
312
313&pcie1 {
314	pinctrl-names = "default";
315	pinctrl-0 = <&pcie1_pins>;
316	status = "okay";
317};
318
319&pio {
320	/* Attention: GPIO 90 is used to switch between PCIe@1,0 and
321	 * SATA functions. i.e. output-high: PCIe, output-low: SATA
322	 */
323	asm_sel {
324		gpio-hog;
325		gpios = <90 GPIO_ACTIVE_HIGH>;
326		output-high;
327	};
328
329	/* eMMC is shared pin with parallel NAND */
330	emmc_pins_default: emmc-pins-default {
331		mux {
332			function = "emmc";
333			groups = "emmc", "emmc_rst";
334		};
335
336		/* "NDL0","NDL1","NDL2","NDL3","NDL4","NDL5","NDL6","NDL7",
337		 * "NRB","NCLE" pins are used as DAT0,DAT1,DAT2,DAT3,DAT4,
338		 * DAT5,DAT6,DAT7,CMD,CLK for eMMC respectively
339		 */
340		conf-cmd-dat {
341			pins = "NDL0", "NDL1", "NDL2",
342			       "NDL3", "NDL4", "NDL5",
343			       "NDL6", "NDL7", "NRB";
344			input-enable;
345			bias-pull-up;
346		};
347
348		conf-clk {
349			pins = "NCLE";
350			bias-pull-down;
351		};
352	};
353
354	emmc_pins_uhs: emmc-pins-uhs {
355		mux {
356			function = "emmc";
357			groups = "emmc";
358		};
359
360		conf-cmd-dat {
361			pins = "NDL0", "NDL1", "NDL2",
362			       "NDL3", "NDL4", "NDL5",
363			       "NDL6", "NDL7", "NRB";
364			input-enable;
365			drive-strength = <4>;
366			bias-pull-up;
367		};
368
369		conf-clk {
370			pins = "NCLE";
371			drive-strength = <4>;
372			bias-pull-down;
373		};
374	};
375
376	eth_pins: eth-pins {
377		mux {
378			function = "eth";
379			groups = "mdc_mdio", "rgmii_via_gmac2";
380		};
381	};
382
383	i2c1_pins: i2c1-pins {
384		mux {
385			function = "i2c";
386			groups = "i2c1_0";
387		};
388	};
389
390	i2c2_pins: i2c2-pins {
391		mux {
392			function = "i2c";
393			groups = "i2c2_0";
394		};
395	};
396
397	i2s1_pins: i2s1-pins {
398		mux {
399			function = "i2s";
400			groups = "i2s_out_mclk_bclk_ws",
401				 "i2s1_in_data",
402				 "i2s1_out_data";
403		};
404
405		conf {
406			pins = "I2S1_IN", "I2S1_OUT", "I2S_BCLK",
407			       "I2S_WS", "I2S_MCLK";
408			drive-strength = <12>;
409			bias-pull-down;
410		};
411	};
412
413	irrx_pins: irrx-pins {
414		mux {
415			function = "ir";
416			groups = "ir_1_rx";
417		};
418	};
419
420	irtx_pins: irtx-pins {
421		mux {
422			function = "ir";
423			groups = "ir_1_tx";
424		};
425	};
426
427	/* Parallel nand is shared pin with eMMC */
428	parallel_nand_pins: parallel-nand-pins {
429		mux {
430			function = "flash";
431			groups = "par_nand";
432		};
433	};
434
435	pcie0_pins: pcie0-pins {
436		mux {
437			function = "pcie";
438			groups = "pcie0_pad_perst",
439				 "pcie0_1_waken",
440				 "pcie0_1_clkreq";
441		};
442	};
443
444	pcie1_pins: pcie1-pins {
445		mux {
446			function = "pcie";
447			groups = "pcie1_pad_perst",
448				 "pcie1_0_waken",
449				 "pcie1_0_clkreq";
450		};
451	};
452
453	pmic_bus_pins: pmic-bus-pins {
454		mux {
455			function = "pmic";
456			groups = "pmic_bus";
457		};
458	};
459
460	pwm_pins: pwm-pins {
461		mux {
462			function = "pwm";
463			groups = "pwm_ch1_0", /* mt7622_pwm_ch1_0_pins[] = { 51, }; */
464				 "pwm_ch2_0", /* mt7622_pwm_ch2_0_pins[] = { 52, }; */
465				 "pwm_ch3_2", /* mt7622_pwm_ch3_2_pins[] = { 97, }; */
466				 "pwm_ch4_1", /* mt7622_pwm_ch4_1_pins[] = { 67, }; */
467				 "pwm_ch5_0", /* mt7622_pwm_ch5_0_pins[] = { 68, }; */
468				 "pwm_ch6_0"; /* mt7622_pwm_ch6_0_pins[] = { 69, }; */
469		};
470	};
471
472	wled_pins: wled-pins {
473		mux {
474			function = "led";
475			groups = "wled";
476		};
477	};
478
479	sd0_pins_default: sd0-pins-default {
480		mux {
481			function = "sd";
482			groups = "sd_0";
483		};
484
485		/* "I2S2_OUT, "I2S4_IN"", "I2S3_IN", "I2S2_IN",
486		 *  "I2S4_OUT", "I2S3_OUT" are used as DAT0, DAT1,
487		 *  DAT2, DAT3, CMD, CLK for SD respectively.
488		 */
489		conf-cmd-data {
490			pins = "I2S2_OUT", "I2S4_IN", "I2S3_IN",
491			       "I2S2_IN","I2S4_OUT";
492			input-enable;
493			drive-strength = <8>;
494			bias-pull-up;
495		};
496		conf-clk {
497			pins = "I2S3_OUT";
498			drive-strength = <12>;
499			bias-pull-down;
500		};
501		conf-cd {
502			pins = "TXD3";
503			bias-pull-up;
504		};
505	};
506
507	sd0_pins_uhs: sd0-pins-uhs {
508		mux {
509			function = "sd";
510			groups = "sd_0";
511		};
512
513		conf-cmd-data {
514			pins = "I2S2_OUT", "I2S4_IN", "I2S3_IN",
515			       "I2S2_IN","I2S4_OUT";
516			input-enable;
517			bias-pull-up;
518		};
519
520		conf-clk {
521			pins = "I2S3_OUT";
522			bias-pull-down;
523		};
524	};
525
526	/* Serial NAND is shared pin with SPI-NOR */
527	serial_nand_pins: serial-nand-pins {
528		mux {
529			function = "flash";
530			groups = "snfi";
531		};
532	};
533
534	spic0_pins: spic0-pins {
535		mux {
536			function = "spi";
537			groups = "spic0_0";
538		};
539	};
540
541	spic1_pins: spic1-pins {
542		mux {
543			function = "spi";
544			groups = "spic1_0";
545		};
546	};
547
548	/* SPI-NOR is shared pin with serial NAND */
549	spi_nor_pins: spi-nor-pins {
550		mux {
551			function = "flash";
552			groups = "spi_nor";
553		};
554	};
555
556	/* serial NAND is shared pin with SPI-NOR */
557	serial_nand_pins: serial-nand-pins {
558		mux {
559			function = "flash";
560			groups = "snfi";
561		};
562	};
563
564	uart0_pins: uart0-pins {
565		mux {
566			function = "uart";
567			groups = "uart0_0_tx_rx" ;
568		};
569	};
570
571	uart2_pins: uart2-pins {
572		mux {
573			function = "uart";
574			groups = "uart2_1_tx_rx" ;
575		};
576	};
577
578	watchdog_pins: watchdog-pins {
579		mux {
580			function = "watchdog";
581			groups = "watchdog";
582		};
583	};
584};
585
586&pwm {
587	pinctrl-names = "default";
588	pinctrl-0 = <&pwm_pins>;
589	status = "okay";
590};
591
592&pwrap {
593	pinctrl-names = "default";
594	pinctrl-0 = <&pmic_bus_pins>;
595
596	status = "okay";
597};
598
599&sata {
600	status = "disabled";
601};
602
603&sata_phy {
604	status = "disabled";
605};
606
607&spi0 {
608	pinctrl-names = "default";
609	pinctrl-0 = <&spic0_pins>;
610	status = "okay";
611};
612
613&spi1 {
614	pinctrl-names = "default";
615	pinctrl-0 = <&spic1_pins>;
616};
617
618&ssusb {
619	vusb33-supply = <&reg_3p3v>;
620	vbus-supply = <&reg_5v>;
621	status = "okay";
622};
623
624&u3phy {
625	status = "okay";
626};
627
628&uart0 {
629	pinctrl-names = "default";
630	pinctrl-0 = <&uart0_pins>;
631	status = "okay";
632};
633
634&uart2 {
635	pinctrl-names = "default";
636	pinctrl-0 = <&uart2_pins>;
637};
638
639&watchdog {
640	pinctrl-names = "default";
641	pinctrl-0 = <&watchdog_pins>;
642	status = "okay";
643};
644
645&wmac {
646	status = "okay";
647};
648