1// SPDX-License-Identifier: (GPL-2.0+ OR MIT) 2/* 3 * Copyright (C) 2019 Marvell Technology Group Ltd. 4 * 5 * Device Tree file for Marvell Armada AP80x. 6 */ 7 8#include <dt-bindings/interrupt-controller/arm-gic.h> 9#include <dt-bindings/thermal/thermal.h> 10 11/dts-v1/; 12 13/ { 14 #address-cells = <2>; 15 #size-cells = <2>; 16 17 aliases { 18 serial0 = &uart0; 19 serial1 = &uart1; 20 gpio0 = &ap_gpio; 21 spi0 = &spi0; 22 }; 23 24 psci { 25 compatible = "arm,psci-0.2"; 26 method = "smc"; 27 }; 28 29 reserved-memory { 30 #address-cells = <2>; 31 #size-cells = <2>; 32 ranges; 33 34 /* 35 * This area matches the mapping done with a 36 * mainline U-Boot, and should be updated by the 37 * bootloader. 38 */ 39 40 psci-area@4000000 { 41 reg = <0x0 0x4000000 0x0 0x200000>; 42 no-map; 43 }; 44 45 tee@4400000 { 46 reg = <0 0x4400000 0 0x1000000>; 47 no-map; 48 }; 49 }; 50 51 AP_NAME { 52 #address-cells = <2>; 53 #size-cells = <2>; 54 compatible = "simple-bus"; 55 interrupt-parent = <&gic>; 56 ranges; 57 58 config-space@f0000000 { 59 #address-cells = <1>; 60 #size-cells = <1>; 61 compatible = "simple-bus"; 62 ranges = <0x0 0x0 0xf0000000 0x1000000>; 63 64 smmu: iommu@100000 { 65 compatible = "marvell,ap806-smmu-500", "arm,mmu-500"; 66 reg = <0x100000 0x100000>; 67 dma-coherent; 68 #iommu-cells = <1>; 69 #global-interrupts = <1>; 70 interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, 71 <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, 72 <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, 73 <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, 74 <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, 75 <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, 76 <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, 77 <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, 78 <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; 79 status = "disabled"; 80 }; 81 82 gic: interrupt-controller@210000 { 83 compatible = "arm,gic-400"; 84 #interrupt-cells = <3>; 85 #address-cells = <1>; 86 #size-cells = <1>; 87 ranges; 88 interrupt-controller; 89 interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; 90 reg = <0x210000 0x10000>, 91 <0x220000 0x20000>, 92 <0x240000 0x20000>, 93 <0x260000 0x20000>; 94 95 gic_v2m0: v2m@280000 { 96 compatible = "arm,gic-v2m-frame"; 97 msi-controller; 98 reg = <0x280000 0x1000>; 99 arm,msi-base-spi = <160>; 100 arm,msi-num-spis = <32>; 101 }; 102 gic_v2m1: v2m@290000 { 103 compatible = "arm,gic-v2m-frame"; 104 msi-controller; 105 reg = <0x290000 0x1000>; 106 arm,msi-base-spi = <192>; 107 arm,msi-num-spis = <32>; 108 }; 109 gic_v2m2: v2m@2a0000 { 110 compatible = "arm,gic-v2m-frame"; 111 msi-controller; 112 reg = <0x2a0000 0x1000>; 113 arm,msi-base-spi = <224>; 114 arm,msi-num-spis = <32>; 115 }; 116 gic_v2m3: v2m@2b0000 { 117 compatible = "arm,gic-v2m-frame"; 118 msi-controller; 119 reg = <0x2b0000 0x1000>; 120 arm,msi-base-spi = <256>; 121 arm,msi-num-spis = <32>; 122 }; 123 }; 124 125 timer { 126 compatible = "arm,armv8-timer"; 127 interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, 128 <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, 129 <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, 130 <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; 131 }; 132 133 pmu { 134 compatible = "arm,cortex-a72-pmu"; 135 interrupt-parent = <&pic>; 136 interrupts = <17>; 137 }; 138 139 odmi: odmi@300000 { 140 compatible = "marvell,odmi-controller"; 141 msi-controller; 142 marvell,odmi-frames = <4>; 143 reg = <0x300000 0x4000>, 144 <0x304000 0x4000>, 145 <0x308000 0x4000>, 146 <0x30C000 0x4000>; 147 marvell,spi-base = <128>, <136>, <144>, <152>; 148 }; 149 150 gicp: gicp@3f0040 { 151 compatible = "marvell,ap806-gicp"; 152 reg = <0x3f0040 0x10>; 153 marvell,spi-ranges = <64 64>, <288 64>; 154 msi-controller; 155 }; 156 157 pic: interrupt-controller@3f0100 { 158 compatible = "marvell,armada-8k-pic"; 159 reg = <0x3f0100 0x10>; 160 #interrupt-cells = <1>; 161 interrupt-controller; 162 interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>; 163 }; 164 165 sei: interrupt-controller@3f0200 { 166 compatible = "marvell,ap806-sei"; 167 reg = <0x3f0200 0x40>; 168 interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; 169 #interrupt-cells = <1>; 170 interrupt-controller; 171 msi-controller; 172 }; 173 174 xor@400000 { 175 compatible = "marvell,armada-7k-xor", "marvell,xor-v2"; 176 reg = <0x400000 0x1000>, 177 <0x410000 0x1000>; 178 msi-parent = <&gic_v2m0>; 179 clocks = <&ap_clk 3>; 180 dma-coherent; 181 }; 182 183 xor@420000 { 184 compatible = "marvell,armada-7k-xor", "marvell,xor-v2"; 185 reg = <0x420000 0x1000>, 186 <0x430000 0x1000>; 187 msi-parent = <&gic_v2m0>; 188 clocks = <&ap_clk 3>; 189 dma-coherent; 190 }; 191 192 xor@440000 { 193 compatible = "marvell,armada-7k-xor", "marvell,xor-v2"; 194 reg = <0x440000 0x1000>, 195 <0x450000 0x1000>; 196 msi-parent = <&gic_v2m0>; 197 clocks = <&ap_clk 3>; 198 dma-coherent; 199 }; 200 201 xor@460000 { 202 compatible = "marvell,armada-7k-xor", "marvell,xor-v2"; 203 reg = <0x460000 0x1000>, 204 <0x470000 0x1000>; 205 msi-parent = <&gic_v2m0>; 206 clocks = <&ap_clk 3>; 207 dma-coherent; 208 }; 209 210 spi0: spi@510600 { 211 compatible = "marvell,armada-380-spi"; 212 reg = <0x510600 0x50>; 213 #address-cells = <1>; 214 #size-cells = <0>; 215 interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; 216 clocks = <&ap_clk 3>; 217 status = "disabled"; 218 }; 219 220 i2c0: i2c@511000 { 221 compatible = "marvell,mv78230-i2c"; 222 reg = <0x511000 0x20>; 223 #address-cells = <1>; 224 #size-cells = <0>; 225 interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; 226 clocks = <&ap_clk 3>; 227 status = "disabled"; 228 }; 229 230 uart0: serial@512000 { 231 compatible = "snps,dw-apb-uart"; 232 reg = <0x512000 0x100>; 233 reg-shift = <2>; 234 interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; 235 reg-io-width = <1>; 236 clocks = <&ap_clk 3>; 237 status = "disabled"; 238 }; 239 240 uart1: serial@512100 { 241 compatible = "snps,dw-apb-uart"; 242 reg = <0x512100 0x100>; 243 reg-shift = <2>; 244 interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; 245 reg-io-width = <1>; 246 clocks = <&ap_clk 3>; 247 status = "disabled"; 248 249 }; 250 251 watchdog: watchdog@610000 { 252 compatible = "arm,sbsa-gwdt"; 253 reg = <0x610000 0x1000>, <0x600000 0x1000>; 254 interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; 255 }; 256 257 ap_sdhci0: mmc@6e0000 { 258 compatible = "marvell,armada-ap806-sdhci"; 259 reg = <0x6e0000 0x300>; 260 interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; 261 clock-names = "core"; 262 clocks = <&ap_clk 4>; 263 dma-coherent; 264 marvell,xenon-phy-slow-mode; 265 status = "disabled"; 266 }; 267 268 ap_syscon0: system-controller@6f4000 { 269 compatible = "syscon", "simple-mfd"; 270 reg = <0x6f4000 0x2000>; 271 272 ap_pinctrl: pinctrl { 273 compatible = "marvell,ap806-pinctrl"; 274 275 uart0_pins: uart0-pins { 276 marvell,pins = "mpp11", "mpp19"; 277 marvell,function = "uart0"; 278 }; 279 }; 280 281 ap_gpio: gpio@1040 { 282 compatible = "marvell,armada-8k-gpio"; 283 offset = <0x1040>; 284 ngpios = <20>; 285 gpio-controller; 286 #gpio-cells = <2>; 287 gpio-ranges = <&ap_pinctrl 0 0 20>; 288 marvell,pwm-offset = <0x10c0>; 289 #pwm-cells = <2>; 290 clocks = <&ap_clk 3>; 291 }; 292 }; 293 294 ap_syscon1: system-controller@6f8000 { 295 compatible = "syscon", "simple-mfd"; 296 reg = <0x6f8000 0x1000>; 297 #address-cells = <1>; 298 #size-cells = <1>; 299 300 ap_thermal: thermal-sensor@80 { 301 compatible = "marvell,armada-ap806-thermal"; 302 reg = <0x80 0x10>; 303 interrupt-parent = <&sei>; 304 interrupts = <18>; 305 #thermal-sensor-cells = <1>; 306 }; 307 }; 308 }; 309 }; 310 311 /* 312 * The thermal IP features one internal sensor plus, if applicable, one 313 * remote channel wired to one sensor per CPU. 314 * 315 * Only one thermal zone per AP/CP may trigger interrupts at a time, the 316 * first one that will have a critical trip point will be chosen. 317 */ 318 thermal-zones { 319 ap_thermal_ic: ap-ic-thermal { 320 polling-delay-passive = <0>; /* Interrupt driven */ 321 polling-delay = <0>; /* Interrupt driven */ 322 323 thermal-sensors = <&ap_thermal 0>; 324 325 trips { 326 ap_crit: ap-crit { 327 temperature = <100000>; /* mC degrees */ 328 hysteresis = <2000>; /* mC degrees */ 329 type = "critical"; 330 }; 331 }; 332 333 cooling-maps { }; 334 }; 335 336 ap_thermal_cpu0: ap-cpu0-thermal { 337 polling-delay-passive = <1000>; 338 polling-delay = <1000>; 339 340 thermal-sensors = <&ap_thermal 1>; 341 342 trips { 343 cpu0_hot: cpu0-hot { 344 temperature = <85000>; 345 hysteresis = <2000>; 346 type = "passive"; 347 }; 348 cpu0_emerg: cpu0-emerg { 349 temperature = <95000>; 350 hysteresis = <2000>; 351 type = "passive"; 352 }; 353 }; 354 355 cooling-maps { 356 map0_hot: map0-hot { 357 trip = <&cpu0_hot>; 358 cooling-device = <&cpu0 1 2>, 359 <&cpu1 1 2>; 360 }; 361 map0_emerg: map0-ermerg { 362 trip = <&cpu0_emerg>; 363 cooling-device = <&cpu0 3 3>, 364 <&cpu1 3 3>; 365 }; 366 }; 367 }; 368 369 ap_thermal_cpu1: ap-cpu1-thermal { 370 polling-delay-passive = <1000>; 371 polling-delay = <1000>; 372 373 thermal-sensors = <&ap_thermal 2>; 374 375 trips { 376 cpu1_hot: cpu1-hot { 377 temperature = <85000>; 378 hysteresis = <2000>; 379 type = "passive"; 380 }; 381 cpu1_emerg: cpu1-emerg { 382 temperature = <95000>; 383 hysteresis = <2000>; 384 type = "passive"; 385 }; 386 }; 387 388 cooling-maps { 389 map1_hot: map1-hot { 390 trip = <&cpu1_hot>; 391 cooling-device = <&cpu0 1 2>, 392 <&cpu1 1 2>; 393 }; 394 map1_emerg: map1-emerg { 395 trip = <&cpu1_emerg>; 396 cooling-device = <&cpu0 3 3>, 397 <&cpu1 3 3>; 398 }; 399 }; 400 }; 401 402 ap_thermal_cpu2: ap-cpu2-thermal { 403 polling-delay-passive = <1000>; 404 polling-delay = <1000>; 405 406 thermal-sensors = <&ap_thermal 3>; 407 408 trips { 409 cpu2_hot: cpu2-hot { 410 temperature = <85000>; 411 hysteresis = <2000>; 412 type = "passive"; 413 }; 414 cpu2_emerg: cpu2-emerg { 415 temperature = <95000>; 416 hysteresis = <2000>; 417 type = "passive"; 418 }; 419 }; 420 421 cooling-maps { 422 map2_hot: map2-hot { 423 trip = <&cpu2_hot>; 424 cooling-device = <&cpu2 1 2>, 425 <&cpu3 1 2>; 426 }; 427 map2_emerg: map2-emerg { 428 trip = <&cpu2_emerg>; 429 cooling-device = <&cpu2 3 3>, 430 <&cpu3 3 3>; 431 }; 432 }; 433 }; 434 435 ap_thermal_cpu3: ap-cpu3-thermal { 436 polling-delay-passive = <1000>; 437 polling-delay = <1000>; 438 439 thermal-sensors = <&ap_thermal 4>; 440 441 trips { 442 cpu3_hot: cpu3-hot { 443 temperature = <85000>; 444 hysteresis = <2000>; 445 type = "passive"; 446 }; 447 cpu3_emerg: cpu3-emerg { 448 temperature = <95000>; 449 hysteresis = <2000>; 450 type = "passive"; 451 }; 452 }; 453 454 cooling-maps { 455 map3_hot: map3-bhot { 456 trip = <&cpu3_hot>; 457 cooling-device = <&cpu2 1 2>, 458 <&cpu3 1 2>; 459 }; 460 map3_emerg: map3-emerg { 461 trip = <&cpu3_emerg>; 462 cooling-device = <&cpu2 3 3>, 463 <&cpu3 3 3>; 464 }; 465 }; 466 }; 467 }; 468}; 469