1// SPDX-License-Identifier: (GPL-2.0+ OR MIT) 2/* 3 * Copyright (C) 2016 Marvell Technology Group Ltd. 4 * 5 * Device Tree file for Marvell Armada 8040 Development board platform 6 */ 7 8#include <dt-bindings/gpio/gpio.h> 9#include "armada-8040.dtsi" 10 11/ { 12 model = "Marvell Armada 8040 DB board"; 13 compatible = "marvell,armada8040-db", "marvell,armada8040", 14 "marvell,armada-ap806-quad", "marvell,armada-ap806"; 15 16 chosen { 17 stdout-path = "serial0:115200n8"; 18 }; 19 20 memory@0 { 21 device_type = "memory"; 22 reg = <0x0 0x0 0x0 0x80000000>; 23 }; 24 25 aliases { 26 ethernet0 = &cp0_eth0; 27 ethernet1 = &cp0_eth2; 28 ethernet2 = &cp1_eth0; 29 ethernet3 = &cp1_eth1; 30 i2c1 = &cp0_i2c0; 31 i2c2 = &cp1_i2c0; 32 }; 33 34 cp0_reg_usb3_0_vbus: cp0-usb3-0-vbus { 35 compatible = "regulator-fixed"; 36 regulator-name = "cp0-usb3h0-vbus"; 37 regulator-min-microvolt = <5000000>; 38 regulator-max-microvolt = <5000000>; 39 enable-active-high; 40 gpio = <&expander0 0 GPIO_ACTIVE_HIGH>; 41 }; 42 43 cp0_reg_usb3_1_vbus: cp0-usb3-1-vbus { 44 compatible = "regulator-fixed"; 45 regulator-name = "cp0-usb3h1-vbus"; 46 regulator-min-microvolt = <5000000>; 47 regulator-max-microvolt = <5000000>; 48 enable-active-high; 49 gpio = <&expander0 1 GPIO_ACTIVE_HIGH>; 50 }; 51 52 cp0_usb3_0_phy: cp0-usb3-0-phy { 53 compatible = "usb-nop-xceiv"; 54 vcc-supply = <&cp0_reg_usb3_0_vbus>; 55 }; 56 57 cp1_reg_usb3_0_vbus: cp1-usb3-0-vbus { 58 compatible = "regulator-fixed"; 59 regulator-name = "cp1-usb3h0-vbus"; 60 regulator-min-microvolt = <5000000>; 61 regulator-max-microvolt = <5000000>; 62 enable-active-high; 63 gpio = <&expander1 0 GPIO_ACTIVE_HIGH>; 64 }; 65 66 cp1_usb3_0_phy: cp1-usb3-0-phy { 67 compatible = "usb-nop-xceiv"; 68 vcc-supply = <&cp1_reg_usb3_0_vbus>; 69 }; 70}; 71 72&spi0 { 73 status = "okay"; 74 75 spi-flash@0 { 76 compatible = "jedec,spi-nor"; 77 reg = <0>; 78 spi-max-frequency = <10000000>; 79 80 partitions { 81 compatible = "fixed-partitions"; 82 #address-cells = <1>; 83 #size-cells = <1>; 84 85 partition@0 { 86 label = "U-Boot"; 87 reg = <0 0x200000>; 88 }; 89 partition@400000 { 90 label = "Filesystem"; 91 reg = <0x200000 0xce0000>; 92 }; 93 }; 94 }; 95}; 96 97/* Accessible over the mini-USB CON9 connector on the main board */ 98&uart0 { 99 status = "okay"; 100 pinctrl-0 = <&uart0_pins>; 101 pinctrl-names = "default"; 102}; 103 104/* CON6 on CP0 expansion */ 105&cp0_pcie0 { 106 phys = <&cp0_comphy0 0>; 107 phy-names = "cp0-pcie0-x1-phy"; 108 status = "okay"; 109}; 110 111/* CON5 on CP0 expansion */ 112&cp0_pcie2 { 113 phys = <&cp0_comphy5 2>; 114 phy-names = "cp0-pcie2-x1-phy"; 115 status = "okay"; 116}; 117 118&cp0_i2c0 { 119 status = "okay"; 120 clock-frequency = <100000>; 121 122 /* U31 */ 123 expander0: pca9555@21 { 124 compatible = "nxp,pca9555"; 125 pinctrl-names = "default"; 126 gpio-controller; 127 #gpio-cells = <2>; 128 reg = <0x21>; 129 }; 130 131 /* U25 */ 132 expander1: pca9555@25 { 133 compatible = "nxp,pca9555"; 134 pinctrl-names = "default"; 135 gpio-controller; 136 #gpio-cells = <2>; 137 reg = <0x25>; 138 }; 139 140}; 141 142/* CON4 on CP0 expansion */ 143&cp0_sata0 { 144 status = "okay"; 145 146 sata-port@0 { 147 phys = <&cp0_comphy1 0>; 148 phy-names = "cp0-sata0-0-phy"; 149 }; 150 sata-port@1 { 151 phys = <&cp0_comphy3 1>; 152 phy-names = "cp0-sata0-1-phy"; 153 }; 154}; 155 156/* CON9 on CP0 expansion */ 157&cp0_utmi { 158 status = "okay"; 159}; 160 161&cp0_usb3_0 { 162 usb-phy = <&cp0_usb3_0_phy>; 163 phys = <&cp0_utmi0>; 164 phy-names = "utmi"; 165 dr_mode = "host"; 166 status = "okay"; 167}; 168 169&cp0_comphy4 { 170 cp0_usbh1_con: connector { 171 compatible = "usb-a-connector"; 172 phy-supply = <&cp0_reg_usb3_1_vbus>; 173 }; 174}; 175 176/* CON10 on CP0 expansion */ 177&cp0_usb3_1 { 178 phys = <&cp0_comphy4 1>, <&cp0_utmi1>; 179 phy-names = "usb", "utmi"; 180 dr_mode = "host"; 181 status = "okay"; 182}; 183 184&cp0_mdio { 185 status = "okay"; 186 187 phy1: ethernet-phy@1 { 188 reg = <1>; 189 }; 190}; 191 192&cp0_ethernet { 193 status = "okay"; 194}; 195 196&cp0_eth0 { 197 status = "okay"; 198 phy-mode = "10gbase-r"; 199 200 fixed-link { 201 speed = <10000>; 202 full-duplex; 203 }; 204}; 205 206&cp0_eth2 { 207 status = "okay"; 208 phy = <&phy1>; 209 phy-mode = "rgmii-id"; 210}; 211 212/* CON6 on CP1 expansion */ 213&cp1_pcie0 { 214 phys = <&cp1_comphy0 0>; 215 phy-names = "cp1-pcie0-x1-phy"; 216 status = "okay"; 217}; 218 219/* CON7 on CP1 expansion */ 220&cp1_pcie1 { 221 phys = <&cp1_comphy4 1>; 222 phy-names = "cp1-pcie1-x1-phy"; 223 status = "okay"; 224}; 225 226/* CON5 on CP1 expansion */ 227&cp1_pcie2 { 228 phys = <&cp1_comphy5 2>; 229 phy-names = "cp1-pcie2-x1-phy"; 230 status = "okay"; 231}; 232 233&cp1_i2c0 { 234 status = "okay"; 235 clock-frequency = <100000>; 236}; 237 238&cp1_spi1 { 239 status = "okay"; 240 241 spi-flash@0 { 242 compatible = "jedec,spi-nor"; 243 reg = <0x0>; 244 spi-max-frequency = <20000000>; 245 246 partitions { 247 compatible = "fixed-partitions"; 248 #address-cells = <1>; 249 #size-cells = <1>; 250 251 partition@0 { 252 label = "Boot"; 253 reg = <0x0 0x200000>; 254 }; 255 partition@200000 { 256 label = "Filesystem"; 257 reg = <0x200000 0xd00000>; 258 }; 259 partition@f00000 { 260 label = "Boot_2nd"; 261 reg = <0xf00000 0x100000>; 262 }; 263 }; 264 }; 265}; 266 267/* 268 * Proper NAND usage will require DPR-76 to be in position 1-2, which disables 269 * MDIO signal of CP1. 270 */ 271&cp1_nand_controller { 272 pinctrl-0 = <&nand_pins>, <&nand_rb>; 273 pinctrl-names = "default"; 274 275 nand@0 { 276 reg = <0>; 277 nand-rb = <0>; 278 nand-on-flash-bbt; 279 nand-ecc-strength = <4>; 280 nand-ecc-step-size = <512>; 281 282 partitions { 283 compatible = "fixed-partitions"; 284 #address-cells = <1>; 285 #size-cells = <1>; 286 287 partition@0 { 288 label = "U-Boot"; 289 reg = <0 0x200000>; 290 }; 291 partition@200000 { 292 label = "Linux"; 293 reg = <0x200000 0xe00000>; 294 }; 295 partition@1000000 { 296 label = "Filesystem"; 297 reg = <0x1000000 0x3f000000>; 298 }; 299 }; 300 }; 301}; 302 303/* CON4 on CP1 expansion */ 304&cp1_sata0 { 305 status = "okay"; 306 307 sata-port@0 { 308 phys = <&cp1_comphy1 0>; 309 phy-names = "cp1-sata0-0-phy"; 310 }; 311 sata-port@1 { 312 phys = <&cp1_comphy3 1>; 313 phy-names = "cp1-sata0-1-phy"; 314 }; 315}; 316 317&cp1_utmi { 318 status = "okay"; 319}; 320 321/* CON9 on CP1 expansion */ 322&cp1_usb3_0 { 323 usb-phy = <&cp1_usb3_0_phy>; 324 phys = <&cp1_utmi0>; 325 phy-names = "utmi"; 326 dr_mode = "host"; 327 status = "okay"; 328}; 329 330/* CON10 on CP1 expansion */ 331&cp1_usb3_1 { 332 phys = <&cp1_utmi1>; 333 phy-names = "utmi"; 334 status = "okay"; 335}; 336 337&cp1_mdio { 338 status = "okay"; 339 340 phy0: ethernet-phy@0 { 341 reg = <0>; 342 }; 343}; 344 345&cp1_ethernet { 346 status = "okay"; 347}; 348 349&cp1_eth0 { 350 status = "okay"; 351 phy-mode = "10gbase-r"; 352 353 fixed-link { 354 speed = <10000>; 355 full-duplex; 356 }; 357}; 358 359&cp1_eth1 { 360 status = "okay"; 361 phy = <&phy0>; 362 phy-mode = "rgmii-id"; 363}; 364 365&ap_sdhci0 { 366 status = "okay"; 367 bus-width = <4>; 368 non-removable; 369}; 370 371&cp0_sdhci0 { 372 status = "okay"; 373 bus-width = <8>; 374 non-removable; 375}; 376