1// SPDX-License-Identifier: (GPL-2.0+ OR MIT) 2/* 3 * Copyright (C) 2018 SolidRun ltd. 4 * Based on Marvell MACCHIATOBin board 5 * 6 * Device Tree file for SolidRun's ClearFog GT 8K 7 */ 8 9#include "armada-8040.dtsi" 10 11#include <dt-bindings/input/input.h> 12#include <dt-bindings/gpio/gpio.h> 13 14/ { 15 model = "SolidRun ClearFog GT 8K"; 16 compatible = "solidrun,clearfog-gt-8k", "marvell,armada8040", 17 "marvell,armada-ap806-quad", "marvell,armada-ap806"; 18 19 chosen { 20 stdout-path = "serial0:115200n8"; 21 }; 22 23 memory@0 { 24 device_type = "memory"; 25 reg = <0x0 0x0 0x0 0x80000000>; 26 }; 27 28 aliases { 29 ethernet0 = &cp1_eth1; 30 ethernet1 = &cp0_eth0; 31 ethernet2 = &cp1_eth2; 32 }; 33 34 fan: pwm { 35 compatible = "pwm-fan"; 36 /* 20% steps */ 37 cooling-levels = <0 51 102 153 204 255>; 38 #cooling-cells = <2>; 39 pinctrl-names = "default"; 40 pinctrl-0 = <&cp0_fan_pwm_pins>; 41 pwms = <&cp0_gpio2 16 40000>; 42 }; 43 44 v_3_3: regulator-3-3v { 45 compatible = "regulator-fixed"; 46 regulator-name = "v_3_3"; 47 regulator-min-microvolt = <3300000>; 48 regulator-max-microvolt = <3300000>; 49 regulator-always-on; 50 status = "okay"; 51 }; 52 53 v_5v0_usb3_hst_vbus: regulator-usb3-vbus0 { 54 compatible = "regulator-fixed"; 55 gpio = <&cp0_gpio2 15 GPIO_ACTIVE_LOW>; 56 pinctrl-names = "default"; 57 pinctrl-0 = <&cp0_xhci_vbus_pins>; 58 regulator-name = "v_5v0_usb3_hst_vbus"; 59 regulator-min-microvolt = <5000000>; 60 regulator-max-microvolt = <5000000>; 61 status = "okay"; 62 }; 63 64 sfp_cp0_eth0: sfp-cp0-eth0 { 65 compatible = "sff,sfp"; 66 i2c-bus = <&cp0_i2c1>; 67 mod-def0-gpios = <&cp0_gpio2 17 GPIO_ACTIVE_LOW>; 68 tx-disable-gpios = <&cp1_gpio1 29 GPIO_ACTIVE_HIGH>; 69 pinctrl-names = "default"; 70 pinctrl-0 = <&cp0_sfp_present_pins &cp1_sfp_tx_disable_pins>; 71 maximum-power-milliwatt = <2000>; 72 }; 73 74 leds { 75 compatible = "gpio-leds"; 76 pinctrl-0 = <&cp0_led0_pins 77 &cp0_led1_pins>; 78 pinctrl-names = "default"; 79 /* No designated function for these LEDs at the moment */ 80 led0 { 81 label = "clearfog-gt-8k:green:led0"; 82 gpios = <&cp0_gpio2 8 GPIO_ACTIVE_LOW>; 83 default-state = "on"; 84 }; 85 led1 { 86 label = "clearfog-gt-8k:green:led1"; 87 gpios = <&cp0_gpio2 9 GPIO_ACTIVE_LOW>; 88 default-state = "on"; 89 }; 90 }; 91 92 keys { 93 compatible = "gpio-keys"; 94 pinctrl-0 = <&cp0_gpio_reset_pins &cp1_wps_button_pins>; 95 pinctrl-names = "default"; 96 97 button-0 { 98 /* The rear button */ 99 label = "Rear Button"; 100 gpios = <&cp0_gpio2 7 GPIO_ACTIVE_LOW>; 101 linux,can-disable; 102 linux,code = <BTN_0>; 103 }; 104 105 button-1 { 106 /* The wps button */ 107 label = "WPS Button"; 108 gpios = <&cp1_gpio1 30 GPIO_ACTIVE_LOW>; 109 linux,can-disable; 110 linux,code = <KEY_WPS_BUTTON>; 111 }; 112 }; 113}; 114 115&ap_thermal_ic { 116 polling-delay = <1000>; /* milliseconds */ 117 trips { 118 ap_active: trip-active { 119 temperature = <40000>; /* millicelsius */ 120 hysteresis = <4000>; /* millicelsius */ 121 type = "active"; 122 }; 123 }; 124 cooling-maps { 125 map0 { 126 trip = <&ap_active>; 127 cooling-device = <&fan THERMAL_NO_LIMIT 4>; 128 }; 129 map1 { 130 trip = <&ap_crit>; 131 cooling-device = <&fan 4 5>; 132 }; 133 }; 134}; 135 136&cp0_thermal_ic { 137 polling-delay = <1000>; /* milliseconds */ 138 trips { 139 cp0_active0: trip-active0 { 140 temperature = <40000>; /* millicelsius */ 141 hysteresis = <2500>; /* millicelsius */ 142 type = "active"; 143 }; 144 cp0_active1: trip-active1 { 145 temperature = <45000>; /* millicelsius */ 146 hysteresis = <2500>; /* millicelsius */ 147 type = "active"; 148 }; 149 cp0_active2: trip-active2 { 150 temperature = <50000>; /* millicelsius */ 151 hysteresis = <2500>; /* millicelsius */ 152 type = "active"; 153 }; 154 cp0_active3: trip-active3 { 155 temperature = <60000>; /* millicelsius */ 156 hysteresis = <2500>; /* millicelsius */ 157 type = "active"; 158 }; 159 }; 160 cooling-maps { 161 map0 { 162 trip = <&cp0_active0>; 163 cooling-device = <&fan 0 1>; 164 }; 165 map1 { 166 trip = <&cp0_active1>; 167 cooling-device = <&fan 1 2>; 168 }; 169 map2 { 170 trip = <&cp0_active2>; 171 cooling-device = <&fan 2 3>; 172 }; 173 map3 { 174 trip = <&cp0_active3>; 175 cooling-device = <&fan 3 4>; 176 }; 177 map4 { 178 trip = <&cp0_crit>; 179 cooling-device = <&fan 4 5>; 180 }; 181 }; 182}; 183 184&cp1_thermal_ic { 185 polling-delay = <1000>; /* milliseconds */ 186 trips { 187 cp1_active0: trip-active0 { 188 temperature = <40000>; /* millicelsius */ 189 hysteresis = <2500>; /* millicelsius */ 190 type = "active"; 191 }; 192 cp1_active1: trip-active1 { 193 temperature = <45000>; /* millicelsius */ 194 hysteresis = <2500>; /* millicelsius */ 195 type = "active"; 196 }; 197 cp1_active2: trip-active2 { 198 temperature = <50000>; /* millicelsius */ 199 hysteresis = <2500>; /* millicelsius */ 200 type = "active"; 201 }; 202 cp1_active3: trip-active3 { 203 temperature = <60000>; /* millicelsius */ 204 hysteresis = <2500>; /* millicelsius */ 205 type = "active"; 206 }; 207 }; 208 cooling-maps { 209 map0 { 210 trip = <&cp1_active0>; 211 cooling-device = <&fan 0 1>; 212 }; 213 map1 { 214 trip = <&cp1_active1>; 215 cooling-device = <&fan 1 2>; 216 }; 217 map2 { 218 trip = <&cp1_active2>; 219 cooling-device = <&fan 2 3>; 220 }; 221 map3 { 222 trip = <&cp1_active3>; 223 cooling-device = <&fan 3 4>; 224 }; 225 map4 { 226 trip = <&cp1_crit>; 227 cooling-device = <&fan 4 5>; 228 }; 229 }; 230}; 231 232&uart0 { 233 status = "okay"; 234 pinctrl-0 = <&uart0_pins>; 235 pinctrl-names = "default"; 236}; 237 238&ap_sdhci0 { 239 bus-width = <8>; 240 no-1-8-v; 241 no-sd; 242 no-sdio; 243 non-removable; 244 status = "okay"; 245 vqmmc-supply = <&v_3_3>; 246}; 247 248&cp0_i2c0 { 249 clock-frequency = <100000>; 250 pinctrl-names = "default"; 251 pinctrl-0 = <&cp0_i2c0_pins>; 252 status = "okay"; 253}; 254 255&cp0_i2c1 { 256 clock-frequency = <100000>; 257 pinctrl-names = "default"; 258 pinctrl-0 = <&cp0_i2c1_pins>; 259 status = "okay"; 260}; 261 262&cp0_pinctrl { 263 /* 264 * MPP Bus: 265 * [0-31] = 0xff: Keep default CP0_shared_pins: 266 * [11] CLKOUT_MPP_11 (out) 267 * [23] LINK_RD_IN_CP2CP (in) 268 * [25] CLKOUT_MPP_25 (out) 269 * [29] AVS_FB_IN_CP2CP (in) 270 * [32, 33, 34] pci0/1/2 reset 271 * [35-38] CP0 I2C1 and I2C0 272 * [39] GPIO reset button 273 * [40,41] LED0 and LED1 274 * [43] 1512 phy reset 275 * [47] USB VBUS EN (active low) 276 * [48] FAN PWM 277 * [49] SFP+ present signal 278 * [50] TPM interrupt 279 * [51] WLAN0 disable 280 * [52] WLAN1 disable 281 * [53] LTE disable 282 * [54] NFC reset 283 * [55] Micro SD card detect 284 * [56-61] Micro SD 285 */ 286 287 cp0_pci0_reset_pins: pci0-reset-pins { 288 marvell,pins = "mpp32"; 289 marvell,function = "gpio"; 290 }; 291 292 cp0_pci1_reset_pins: pci1-reset-pins { 293 marvell,pins = "mpp33"; 294 marvell,function = "gpio"; 295 }; 296 297 cp0_pci2_reset_pins: pci2-reset-pins { 298 marvell,pins = "mpp34"; 299 marvell,function = "gpio"; 300 }; 301 302 cp0_i2c1_pins: i2c1-pins { 303 marvell,pins = "mpp35", "mpp36"; 304 marvell,function = "i2c1"; 305 }; 306 307 cp0_i2c0_pins: i2c0-pins { 308 marvell,pins = "mpp37", "mpp38"; 309 marvell,function = "i2c0"; 310 }; 311 312 cp0_gpio_reset_pins: gpio-reset-pins { 313 marvell,pins = "mpp39"; 314 marvell,function = "gpio"; 315 }; 316 317 cp0_led0_pins: led0-pins { 318 marvell,pins = "mpp40"; 319 marvell,function = "gpio"; 320 }; 321 322 cp0_led1_pins: led1-pins { 323 marvell,pins = "mpp41"; 324 marvell,function = "gpio"; 325 }; 326 327 cp0_copper_eth_phy_reset: copper-eth-phy-reset { 328 marvell,pins = "mpp43"; 329 marvell,function = "gpio"; 330 }; 331 332 cp0_xhci_vbus_pins: xhci0-vbus-pins { 333 marvell,pins = "mpp47"; 334 marvell,function = "gpio"; 335 }; 336 337 cp0_fan_pwm_pins: fan-pwm-pins { 338 marvell,pins = "mpp48"; 339 marvell,function = "gpio"; 340 }; 341 342 cp0_sfp_present_pins: sfp-present-pins { 343 marvell,pins = "mpp49"; 344 marvell,function = "gpio"; 345 }; 346 347 cp0_tpm_irq_pins: tpm-irq-pins { 348 marvell,pins = "mpp50"; 349 marvell,function = "gpio"; 350 }; 351 352 cp0_wlan_disable_pins: wlan-disable-pins { 353 marvell,pins = "mpp51"; 354 marvell,function = "gpio"; 355 }; 356 357 cp0_sdhci_pins: sdhci-pins { 358 marvell,pins = "mpp55", "mpp56", "mpp57", "mpp58", "mpp59", 359 "mpp60", "mpp61"; 360 marvell,function = "sdio"; 361 }; 362}; 363 364&cp0_pcie0 { 365 pinctrl-names = "default"; 366 pinctrl-0 = <&cp0_pci0_reset_pins &cp0_wlan_disable_pins>; 367 reset-gpios = <&cp0_gpio2 0 GPIO_ACTIVE_LOW>; 368 phys = <&cp0_comphy0 0>; 369 phy-names = "cp0-pcie0-x1-phy"; 370 status = "okay"; 371}; 372 373&cp0_gpio2 { 374 sata_reset { 375 gpio-hog; 376 gpios = <1 GPIO_ACTIVE_HIGH>; 377 output-high; 378 }; 379 380 lte_reset { 381 gpio-hog; 382 gpios = <2 GPIO_ACTIVE_LOW>; 383 output-low; 384 }; 385 386 wlan_disable { 387 gpio-hog; 388 gpios = <19 GPIO_ACTIVE_LOW>; 389 output-low; 390 }; 391 392 lte_disable { 393 gpio-hog; 394 gpios = <21 GPIO_ACTIVE_LOW>; 395 output-low; 396 }; 397}; 398 399&cp0_ethernet { 400 status = "okay"; 401}; 402 403/* SFP */ 404&cp0_eth0 { 405 status = "okay"; 406 phy-mode = "10gbase-r"; 407 managed = "in-band-status"; 408 phys = <&cp0_comphy2 0>; 409 sfp = <&sfp_cp0_eth0>; 410}; 411 412&cp0_sdhci0 { 413 broken-cd; 414 bus-width = <4>; 415 pinctrl-names = "default"; 416 pinctrl-0 = <&cp0_sdhci_pins>; 417 status = "okay"; 418 vqmmc-supply = <&v_3_3>; 419}; 420 421&cp0_usb3_1 { 422 status = "okay"; 423}; 424 425&cp1_pinctrl { 426 /* 427 * MPP Bus: 428 * [0-5] TDM 429 * [6] VHV Enable 430 * [7] CP1 SPI0 CSn1 (FXS) 431 * [8] CP1 SPI0 CSn0 (TPM) 432 * [9.11]CP1 SPI0 MOSI/MISO/CLK 433 * [13] CP1 SPI1 MISO (TDM and SPI ROM shared) 434 * [14] CP1 SPI1 CS0n (64Mb SPI ROM) 435 * [15] CP1 SPI1 MOSI (TDM and SPI ROM shared) 436 * [16] CP1 SPI1 CLK (TDM and SPI ROM shared) 437 * [24] Topaz switch reset 438 * [26] Buzzer 439 * [27] CP1 SMI MDIO 440 * [28] CP1 SMI MDC 441 * [29] CP0 10G SFP TX Disable 442 * [30] WPS button 443 * [31] Front panel button 444 */ 445 446 cp1_spi1_pins: spi1-pins { 447 marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16"; 448 marvell,function = "spi1"; 449 }; 450 451 cp1_switch_reset_pins: switch-reset-pins { 452 marvell,pins = "mpp24"; 453 marvell,function = "gpio"; 454 }; 455 456 cp1_ge_mdio_pins: ge-mdio-pins { 457 marvell,pins = "mpp27", "mpp28"; 458 marvell,function = "ge"; 459 }; 460 461 cp1_sfp_tx_disable_pins: sfp-tx-disable-pins { 462 marvell,pins = "mpp29"; 463 marvell,function = "gpio"; 464 }; 465 466 cp1_wps_button_pins: wps-button-pins { 467 marvell,pins = "mpp30"; 468 marvell,function = "gpio"; 469 }; 470}; 471 472&cp1_sata0 { 473 pinctrl-0 = <&cp0_pci1_reset_pins>; 474 status = "okay"; 475 476 sata-port@1 { 477 phys = <&cp1_comphy0 1>; 478 }; 479}; 480 481&cp1_mdio { 482 pinctrl-names = "default"; 483 pinctrl-0 = <&cp1_ge_mdio_pins>; 484 status = "okay"; 485 486 ge_phy: ethernet-phy@0 { 487 /* LED0 - GB link 488 * LED1 - on: link, blink: activity 489 */ 490 marvell,reg-init = <3 16 0 0x1017>; 491 reg = <0>; 492 pinctrl-names = "default"; 493 pinctrl-0 = <&cp0_copper_eth_phy_reset>; 494 reset-gpios = <&cp0_gpio2 11 GPIO_ACTIVE_LOW>; 495 reset-assert-us = <10000>; 496 reset-deassert-us = <10000>; 497 }; 498 499 switch0: ethernet-switch@4 { 500 compatible = "marvell,mv88e6085"; 501 reg = <4>; 502 pinctrl-names = "default"; 503 pinctrl-0 = <&cp1_switch_reset_pins>; 504 reset-gpios = <&cp1_gpio1 24 GPIO_ACTIVE_LOW>; 505 506 ethernet-ports { 507 #address-cells = <1>; 508 #size-cells = <0>; 509 510 ethernet-port@1 { 511 reg = <1>; 512 label = "lan2"; 513 phy-handle = <&switch0phy0>; 514 }; 515 516 ethernet-port@2 { 517 reg = <2>; 518 label = "lan1"; 519 phy-handle = <&switch0phy1>; 520 }; 521 522 ethernet-port@3 { 523 reg = <3>; 524 label = "lan4"; 525 phy-handle = <&switch0phy2>; 526 }; 527 528 ethernet-port@4 { 529 reg = <4>; 530 label = "lan3"; 531 phy-handle = <&switch0phy3>; 532 }; 533 534 ethernet-port@5 { 535 reg = <5>; 536 label = "cpu"; 537 ethernet = <&cp1_eth2>; 538 phy-mode = "2500base-x"; 539 managed = "in-band-status"; 540 }; 541 }; 542 543 mdio { 544 #address-cells = <1>; 545 #size-cells = <0>; 546 547 switch0phy0: ethernet-phy@11 { 548 reg = <0x11>; 549 }; 550 551 switch0phy1: ethernet-phy@12 { 552 reg = <0x12>; 553 }; 554 555 switch0phy2: ethernet-phy@13 { 556 reg = <0x13>; 557 }; 558 559 switch0phy3: ethernet-phy@14 { 560 reg = <0x14>; 561 }; 562 }; 563 }; 564}; 565 566&cp1_ethernet { 567 status = "okay"; 568}; 569 570/* 1G copper */ 571&cp1_eth1 { 572 status = "okay"; 573 phy-mode = "sgmii"; 574 phy = <&ge_phy>; 575 phys = <&cp1_comphy3 1>; 576}; 577 578/* Switch uplink */ 579&cp1_eth2 { 580 status = "okay"; 581 phy-mode = "2500base-x"; 582 phys = <&cp1_comphy5 2>; 583 managed = "in-band-status"; 584}; 585 586&cp1_spi1 { 587 pinctrl-names = "default"; 588 pinctrl-0 = <&cp1_spi1_pins>; 589 status = "okay"; 590 591 flash@0 { 592 compatible = "st,w25q32"; 593 spi-max-frequency = <50000000>; 594 reg = <0>; 595 }; 596}; 597 598&cp1_comphy2 { 599 cp1_usbh0_con: connector { 600 compatible = "usb-a-connector"; 601 phy-supply = <&v_5v0_usb3_hst_vbus>; 602 }; 603}; 604 605&cp1_usb3_0 { 606 phys = <&cp1_comphy2 0>; 607 phy-names = "cp1-usb3h0-comphy"; 608 status = "okay"; 609}; 610