1// SPDX-License-Identifier: (GPL-2.0+ OR MIT) 2/* 3 * Device Tree Include file for Marvell Armada 37xx family of SoCs. 4 * 5 * Copyright (C) 2016 Marvell 6 * 7 * Gregory CLEMENT <gregory.clement@free-electrons.com> 8 * 9 */ 10 11#include <dt-bindings/interrupt-controller/arm-gic.h> 12 13/ { 14 model = "Marvell Armada 37xx SoC"; 15 compatible = "marvell,armada3700"; 16 interrupt-parent = <&gic>; 17 #address-cells = <2>; 18 #size-cells = <2>; 19 20 aliases { 21 serial0 = &uart0; 22 serial1 = &uart1; 23 }; 24 25 reserved-memory { 26 #address-cells = <2>; 27 #size-cells = <2>; 28 ranges; 29 30 /* 31 * The PSCI firmware region depicted below is the default one 32 * and should be updated by the bootloader. 33 */ 34 psci-area@4000000 { 35 reg = <0 0x4000000 0 0x200000>; 36 no-map; 37 }; 38 39 tee@4400000 { 40 reg = <0 0x4400000 0 0x1000000>; 41 no-map; 42 }; 43 }; 44 45 cpus { 46 #address-cells = <1>; 47 #size-cells = <0>; 48 cpu0: cpu@0 { 49 device_type = "cpu"; 50 compatible = "arm,cortex-a53"; 51 reg = <0>; 52 clocks = <&nb_periph_clk 16>; 53 enable-method = "psci"; 54 }; 55 }; 56 57 psci { 58 compatible = "arm,psci-0.2"; 59 method = "smc"; 60 }; 61 62 timer { 63 compatible = "arm,armv8-timer"; 64 interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>, 65 <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>, 66 <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>, 67 <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH>; 68 }; 69 70 pmu { 71 compatible = "arm,armv8-pmuv3"; 72 interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>; 73 }; 74 75 soc { 76 compatible = "simple-bus"; 77 #address-cells = <2>; 78 #size-cells = <2>; 79 ranges; 80 81 internal-regs@d0000000 { 82 #address-cells = <1>; 83 #size-cells = <1>; 84 compatible = "simple-bus"; 85 /* 32M internal register @ 0xd000_0000 */ 86 ranges = <0x0 0x0 0xd0000000 0x2000000>; 87 88 wdt: watchdog@8300 { 89 compatible = "marvell,armada-3700-wdt"; 90 reg = <0x8300 0x40>; 91 marvell,system-controller = <&cpu_misc>; 92 clocks = <&xtalclk>; 93 }; 94 95 cpu_misc: system-controller@d000 { 96 compatible = "marvell,armada-3700-cpu-misc", 97 "syscon"; 98 reg = <0xd000 0x1000>; 99 }; 100 101 spi0: spi@10600 { 102 compatible = "marvell,armada-3700-spi"; 103 #address-cells = <1>; 104 #size-cells = <0>; 105 reg = <0x10600 0xA00>; 106 clocks = <&nb_periph_clk 7>; 107 interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; 108 num-cs = <4>; 109 status = "disabled"; 110 }; 111 112 i2c0: i2c@11000 { 113 compatible = "marvell,armada-3700-i2c"; 114 reg = <0x11000 0x24>; 115 #address-cells = <1>; 116 #size-cells = <0>; 117 clocks = <&nb_periph_clk 10>; 118 interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; 119 mrvl,i2c-fast-mode; 120 status = "disabled"; 121 }; 122 123 i2c1: i2c@11080 { 124 compatible = "marvell,armada-3700-i2c"; 125 reg = <0x11080 0x24>; 126 #address-cells = <1>; 127 #size-cells = <0>; 128 clocks = <&nb_periph_clk 9>; 129 interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; 130 mrvl,i2c-fast-mode; 131 status = "disabled"; 132 }; 133 134 avs: avs@11500 { 135 compatible = "marvell,armada-3700-avs", 136 "syscon"; 137 reg = <0x11500 0x40>; 138 }; 139 140 uartclk: clock-controller@12010 { 141 compatible = "marvell,armada-3700-uart-clock"; 142 reg = <0x12010 0x4>, <0x12210 0x4>; 143 clocks = <&tbg 0>, <&tbg 1>, <&tbg 2>, 144 <&tbg 3>, <&xtalclk>; 145 clock-names = "TBG-A-P", "TBG-B-P", "TBG-A-S", 146 "TBG-B-S", "xtal"; 147 #clock-cells = <1>; 148 }; 149 150 uart0: serial@12000 { 151 compatible = "marvell,armada-3700-uart"; 152 reg = <0x12000 0x18>; 153 clocks = <&uartclk 0>; 154 interrupts = 155 <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, 156 <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, 157 <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; 158 interrupt-names = "uart-sum", "uart-tx", "uart-rx"; 159 status = "disabled"; 160 }; 161 162 uart1: serial@12200 { 163 compatible = "marvell,armada-3700-uart-ext"; 164 reg = <0x12200 0x30>; 165 clocks = <&uartclk 1>; 166 interrupts = 167 <GIC_SPI 30 IRQ_TYPE_EDGE_RISING>, 168 <GIC_SPI 31 IRQ_TYPE_EDGE_RISING>; 169 interrupt-names = "uart-tx", "uart-rx"; 170 status = "disabled"; 171 }; 172 173 nb_periph_clk: nb-periph-clk@13000 { 174 compatible = "marvell,armada-3700-periph-clock-nb", 175 "syscon"; 176 reg = <0x13000 0x100>; 177 clocks = <&tbg 0>, <&tbg 1>, <&tbg 2>, 178 <&tbg 3>, <&xtalclk>; 179 #clock-cells = <1>; 180 }; 181 182 sb_periph_clk: sb-periph-clk@18000 { 183 compatible = "marvell,armada-3700-periph-clock-sb"; 184 reg = <0x18000 0x100>; 185 clocks = <&tbg 0>, <&tbg 1>, <&tbg 2>, 186 <&tbg 3>, <&xtalclk>; 187 #clock-cells = <1>; 188 }; 189 190 tbg: tbg@13200 { 191 compatible = "marvell,armada-3700-tbg-clock"; 192 reg = <0x13200 0x100>; 193 clocks = <&xtalclk>; 194 #clock-cells = <1>; 195 }; 196 197 pinctrl_nb: pinctrl@13800 { 198 compatible = "marvell,armada3710-nb-pinctrl", 199 "syscon", "simple-mfd"; 200 reg = <0x13800 0x100>, <0x13C00 0x20>; 201 /* MPP1[19:0] */ 202 gpionb: gpio { 203 #gpio-cells = <2>; 204 gpio-ranges = <&pinctrl_nb 0 0 36>; 205 gpio-controller; 206 interrupt-controller; 207 #interrupt-cells = <2>; 208 interrupts = 209 <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>, 210 <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>, 211 <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, 212 <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, 213 <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>, 214 <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>, 215 <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>, 216 <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>, 217 <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>, 218 <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>, 219 <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>, 220 <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; 221 }; 222 223 xtalclk: xtal-clk { 224 compatible = "marvell,armada-3700-xtal-clock"; 225 clock-output-names = "xtal"; 226 #clock-cells = <0>; 227 }; 228 229 spi_quad_pins: spi-quad-pins { 230 groups = "spi_quad"; 231 function = "spi"; 232 }; 233 234 spi_cs1_pins: spi-cs1-pins { 235 groups = "spi_cs1"; 236 function = "spi"; 237 }; 238 239 i2c1_pins: i2c1-pins { 240 groups = "i2c1"; 241 function = "i2c"; 242 }; 243 244 i2c2_pins: i2c2-pins { 245 groups = "i2c2"; 246 function = "i2c"; 247 }; 248 249 uart1_pins: uart1-pins { 250 groups = "uart1"; 251 function = "uart"; 252 }; 253 254 uart2_pins: uart2-pins { 255 groups = "uart2"; 256 function = "uart"; 257 }; 258 259 mmc_pins: mmc-pins { 260 groups = "emmc_nb"; 261 function = "emmc"; 262 }; 263 }; 264 265 nb_pm: syscon@14000 { 266 compatible = "marvell,armada-3700-nb-pm", 267 "syscon"; 268 reg = <0x14000 0x60>; 269 }; 270 271 comphy: phy@18300 { 272 compatible = "marvell,comphy-a3700"; 273 reg = <0x18300 0x300>, 274 <0x1F000 0x400>, 275 <0x5C000 0x400>, 276 <0xe0178 0x8>; 277 reg-names = "comphy", 278 "lane1_pcie_gbe", 279 "lane0_usb3_gbe", 280 "lane2_sata_usb3"; 281 #address-cells = <1>; 282 #size-cells = <0>; 283 clocks = <&xtalclk>; 284 clock-names = "xtal"; 285 286 comphy0: phy@0 { 287 reg = <0>; 288 #phy-cells = <1>; 289 }; 290 291 comphy1: phy@1 { 292 reg = <1>; 293 #phy-cells = <1>; 294 }; 295 296 comphy2: phy@2 { 297 reg = <2>; 298 #phy-cells = <1>; 299 }; 300 }; 301 302 pinctrl_sb: pinctrl@18800 { 303 compatible = "marvell,armada3710-sb-pinctrl", 304 "syscon", "simple-mfd"; 305 reg = <0x18800 0x100>, <0x18C00 0x20>; 306 /* MPP2[23:0] */ 307 gpiosb: gpio { 308 #gpio-cells = <2>; 309 gpio-ranges = <&pinctrl_sb 0 0 30>; 310 gpio-controller; 311 interrupt-controller; 312 #interrupt-cells = <2>; 313 interrupts = 314 <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>, 315 <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>, 316 <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>, 317 <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>, 318 <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>; 319 }; 320 321 rgmii_pins: mii-pins { 322 groups = "rgmii"; 323 function = "mii"; 324 }; 325 326 smi_pins: smi-pins { 327 groups = "smi"; 328 function = "smi"; 329 }; 330 331 sdio_pins: sdio-pins { 332 groups = "sdio_sb"; 333 function = "sdio"; 334 }; 335 336 pcie_reset_pins: pcie-reset-pins { 337 groups = "pcie1"; /* this actually controls "pcie1_reset" */ 338 function = "gpio"; 339 }; 340 341 pcie_clkreq_pins: pcie-clkreq-pins { 342 groups = "pcie1_clkreq"; 343 function = "pcie"; 344 }; 345 }; 346 347 eth0: ethernet@30000 { 348 compatible = "marvell,armada-3700-neta"; 349 reg = <0x30000 0x4000>; 350 interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; 351 clocks = <&sb_periph_clk 8>; 352 status = "disabled"; 353 }; 354 355 mdio: mdio@32004 { 356 #address-cells = <1>; 357 #size-cells = <0>; 358 compatible = "marvell,orion-mdio"; 359 reg = <0x32004 0x4>; 360 }; 361 362 eth1: ethernet@40000 { 363 compatible = "marvell,armada-3700-neta"; 364 reg = <0x40000 0x4000>; 365 interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; 366 clocks = <&sb_periph_clk 7>; 367 status = "disabled"; 368 }; 369 370 usb3: usb@58000 { 371 compatible = "marvell,armada3700-xhci", 372 "generic-xhci"; 373 reg = <0x58000 0x4000>; 374 marvell,usb-misc-reg = <&usb32_syscon>; 375 interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; 376 clocks = <&sb_periph_clk 12>; 377 phys = <&comphy0 0>, <&usb2_utmi_otg_phy>; 378 phy-names = "usb3-phy", "usb2-utmi-otg-phy"; 379 status = "disabled"; 380 }; 381 382 usb2_utmi_otg_phy: phy@5d000 { 383 compatible = "marvell,a3700-utmi-otg-phy"; 384 reg = <0x5d000 0x800>; 385 marvell,usb-misc-reg = <&usb32_syscon>; 386 #phy-cells = <0>; 387 }; 388 389 usb32_syscon: system-controller@5d800 { 390 compatible = "marvell,armada-3700-usb2-host-device-misc", 391 "syscon"; 392 reg = <0x5d800 0x800>; 393 }; 394 395 usb2: usb@5e000 { 396 compatible = "marvell,armada-3700-ehci"; 397 reg = <0x5e000 0x1000>; 398 marvell,usb-misc-reg = <&usb2_syscon>; 399 interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; 400 phys = <&usb2_utmi_host_phy>; 401 phy-names = "usb2-utmi-host-phy"; 402 status = "disabled"; 403 }; 404 405 usb2_utmi_host_phy: phy@5f000 { 406 compatible = "marvell,a3700-utmi-host-phy"; 407 reg = <0x5f000 0x800>; 408 marvell,usb-misc-reg = <&usb2_syscon>; 409 #phy-cells = <0>; 410 }; 411 412 usb2_syscon: system-controller@5f800 { 413 compatible = "marvell,armada-3700-usb2-host-misc", 414 "syscon"; 415 reg = <0x5f800 0x800>; 416 }; 417 418 xor@60900 { 419 compatible = "marvell,armada-3700-xor"; 420 reg = <0x60900 0x100>, 421 <0x60b00 0x100>; 422 423 xor10 { 424 interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; 425 }; 426 xor11 { 427 interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; 428 }; 429 }; 430 431 crypto: crypto@90000 { 432 compatible = "inside-secure,safexcel-eip97ies"; 433 reg = <0x90000 0x20000>; 434 interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>, 435 <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>, 436 <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>, 437 <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>, 438 <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>, 439 <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; 440 interrupt-names = "ring0", "ring1", "ring2", 441 "ring3", "eip", "mem"; 442 clocks = <&nb_periph_clk 15>; 443 }; 444 445 rwtm: mailbox@b0000 { 446 compatible = "marvell,armada-3700-rwtm-mailbox"; 447 reg = <0xb0000 0x100>; 448 interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; 449 #mbox-cells = <1>; 450 }; 451 452 sdhci1: mmc@d0000 { 453 compatible = "marvell,armada-3700-sdhci", 454 "marvell,sdhci-xenon"; 455 reg = <0xd0000 0x300>, 456 <0x1e808 0x4>; 457 interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; 458 clocks = <&nb_periph_clk 0>; 459 clock-names = "core"; 460 status = "disabled"; 461 }; 462 463 sdhci0: mmc@d8000 { 464 compatible = "marvell,armada-3700-sdhci", 465 "marvell,sdhci-xenon"; 466 reg = <0xd8000 0x300>, 467 <0x17808 0x4>; 468 interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; 469 clocks = <&nb_periph_clk 0>; 470 clock-names = "core"; 471 status = "disabled"; 472 }; 473 474 sata: sata@e0000 { 475 compatible = "marvell,armada-3700-ahci"; 476 reg = <0xe0000 0x178>; 477 interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; 478 clocks = <&nb_periph_clk 1>; 479 phys = <&comphy2 0>; 480 phy-names = "sata-phy"; 481 status = "disabled"; 482 }; 483 484 gic: interrupt-controller@1d00000 { 485 compatible = "arm,gic-v3"; 486 #interrupt-cells = <3>; 487 interrupt-controller; 488 reg = <0x1d00000 0x10000>, /* GICD */ 489 <0x1d40000 0x40000>, /* GICR */ 490 <0x1d80000 0x2000>, /* GICC */ 491 <0x1d90000 0x2000>, /* GICH */ 492 <0x1da0000 0x20000>; /* GICV */ 493 interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; 494 }; 495 }; 496 497 pcie0: pcie@d0070000 { 498 compatible = "marvell,armada-3700-pcie"; 499 device_type = "pci"; 500 status = "disabled"; 501 reg = <0 0xd0070000 0 0x20000>; 502 #address-cells = <3>; 503 #size-cells = <2>; 504 bus-range = <0x00 0xff>; 505 interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; 506 #interrupt-cells = <1>; 507 clocks = <&sb_periph_clk 13>; 508 msi-parent = <&pcie0>; 509 msi-controller; 510 /* 511 * The 128 MiB address range [0xe8000000-0xf0000000] is 512 * dedicated for PCIe and can be assigned to 8 windows 513 * with size a power of two. Use one 64 KiB window for 514 * IO at the end and the remaining seven windows 515 * (totaling 127 MiB) for MEM. 516 */ 517 ranges = <0x82000000 0 0xe8000000 0 0xe8000000 0 0x07f00000 /* Port 0 MEM */ 518 0x81000000 0 0x00000000 0 0xefff0000 0 0x00010000>; /* Port 0 IO */ 519 interrupt-map-mask = <0 0 0 7>; 520 interrupt-map = <0 0 0 1 &pcie_intc 0>, 521 <0 0 0 2 &pcie_intc 1>, 522 <0 0 0 3 &pcie_intc 2>, 523 <0 0 0 4 &pcie_intc 3>; 524 max-link-speed = <2>; 525 phys = <&comphy1 0>; 526 pcie_intc: interrupt-controller { 527 interrupt-controller; 528 #interrupt-cells = <1>; 529 }; 530 }; 531 }; 532 533 firmware { 534 armada-3700-rwtm { 535 compatible = "marvell,armada-3700-rwtm-firmware"; 536 mboxes = <&rwtm 0>; 537 status = "okay"; 538 }; 539 }; 540}; 541