xref: /linux/arch/arm64/boot/dts/marvell/armada-37xx.dtsi (revision 1517d90cfafe0f95fd7863d04e1596f7beb7dfa8)
1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2/*
3 * Device Tree Include file for Marvell Armada 37xx family of SoCs.
4 *
5 * Copyright (C) 2016 Marvell
6 *
7 * Gregory CLEMENT <gregory.clement@free-electrons.com>
8 *
9 */
10
11#include <dt-bindings/interrupt-controller/arm-gic.h>
12
13/ {
14	model = "Marvell Armada 37xx SoC";
15	compatible = "marvell,armada3700";
16	interrupt-parent = <&gic>;
17	#address-cells = <2>;
18	#size-cells = <2>;
19
20	aliases {
21		serial0 = &uart0;
22		serial1 = &uart1;
23	};
24
25	reserved-memory {
26		#address-cells = <2>;
27		#size-cells = <2>;
28		ranges;
29
30		/*
31		 * The PSCI firmware region depicted below is the default one
32		 * and should be updated by the bootloader.
33		 */
34		psci-area@4000000 {
35			reg = <0 0x4000000 0 0x200000>;
36			no-map;
37		};
38	};
39
40	cpus {
41		#address-cells = <1>;
42		#size-cells = <0>;
43		cpu0: cpu@0 {
44			device_type = "cpu";
45			compatible = "arm,cortex-a53";
46			reg = <0>;
47			clocks = <&nb_periph_clk 16>;
48			enable-method = "psci";
49		};
50	};
51
52	psci {
53		compatible = "arm,psci-0.2";
54		method = "smc";
55	};
56
57	timer {
58		compatible = "arm,armv8-timer";
59		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>,
60			     <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>,
61			     <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>,
62			     <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH>;
63	};
64
65	pmu {
66		compatible = "arm,armv8-pmuv3";
67		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
68	};
69
70	soc {
71		compatible = "simple-bus";
72		#address-cells = <2>;
73		#size-cells = <2>;
74		ranges;
75
76		internal-regs@d0000000 {
77			#address-cells = <1>;
78			#size-cells = <1>;
79			compatible = "simple-bus";
80			/* 32M internal register @ 0xd000_0000 */
81			ranges = <0x0 0x0 0xd0000000 0x2000000>;
82
83			wdt: watchdog@8300 {
84				compatible = "marvell,armada-3700-wdt";
85				reg = <0x8300 0x40>;
86				marvell,system-controller = <&cpu_misc>;
87				clocks = <&xtalclk>;
88			};
89
90			cpu_misc: system-controller@d000 {
91				compatible = "marvell,armada-3700-cpu-misc",
92					     "syscon";
93				reg = <0xd000 0x1000>;
94			};
95
96			spi0: spi@10600 {
97				compatible = "marvell,armada-3700-spi";
98				#address-cells = <1>;
99				#size-cells = <0>;
100				reg = <0x10600 0xA00>;
101				clocks = <&nb_periph_clk 7>;
102				interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
103				num-cs = <4>;
104				status = "disabled";
105			};
106
107			i2c0: i2c@11000 {
108				compatible = "marvell,armada-3700-i2c";
109				reg = <0x11000 0x24>;
110				#address-cells = <1>;
111				#size-cells = <0>;
112				clocks = <&nb_periph_clk 10>;
113				interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
114				mrvl,i2c-fast-mode;
115				status = "disabled";
116			};
117
118			i2c1: i2c@11080 {
119				compatible = "marvell,armada-3700-i2c";
120				reg = <0x11080 0x24>;
121				#address-cells = <1>;
122				#size-cells = <0>;
123				clocks = <&nb_periph_clk 9>;
124				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
125				mrvl,i2c-fast-mode;
126				status = "disabled";
127			};
128
129			avs: avs@11500 {
130				compatible = "marvell,armada-3700-avs",
131					     "syscon";
132				reg = <0x11500 0x40>;
133			};
134
135			uart0: serial@12000 {
136				compatible = "marvell,armada-3700-uart";
137				reg = <0x12000 0x200>;
138				clocks = <&xtalclk>;
139				interrupts =
140				<GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
141				<GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
142				<GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
143				interrupt-names = "uart-sum", "uart-tx", "uart-rx";
144				status = "disabled";
145			};
146
147			uart1: serial@12200 {
148				compatible = "marvell,armada-3700-uart-ext";
149				reg = <0x12200 0x30>;
150				clocks = <&xtalclk>;
151				interrupts =
152				<GIC_SPI 30 IRQ_TYPE_EDGE_RISING>,
153				<GIC_SPI 31 IRQ_TYPE_EDGE_RISING>;
154				interrupt-names = "uart-tx", "uart-rx";
155				status = "disabled";
156			};
157
158			nb_periph_clk: nb-periph-clk@13000 {
159				compatible = "marvell,armada-3700-periph-clock-nb";
160				reg = <0x13000 0x100>;
161				clocks = <&tbg 0>, <&tbg 1>, <&tbg 2>,
162				<&tbg 3>, <&xtalclk>;
163				#clock-cells = <1>;
164			};
165
166			sb_periph_clk: sb-periph-clk@18000 {
167				compatible = "marvell,armada-3700-periph-clock-sb";
168				reg = <0x18000 0x100>;
169				clocks = <&tbg 0>, <&tbg 1>, <&tbg 2>,
170				<&tbg 3>, <&xtalclk>;
171				#clock-cells = <1>;
172			};
173
174			tbg: tbg@13200 {
175				compatible = "marvell,armada-3700-tbg-clock";
176				reg = <0x13200 0x100>;
177				clocks = <&xtalclk>;
178				#clock-cells = <1>;
179			};
180
181			pinctrl_nb: pinctrl@13800 {
182				compatible = "marvell,armada3710-nb-pinctrl",
183					     "syscon", "simple-mfd";
184				reg = <0x13800 0x100>, <0x13C00 0x20>;
185				/* MPP1[19:0] */
186				gpionb: gpio {
187					#gpio-cells = <2>;
188					gpio-ranges = <&pinctrl_nb 0 0 36>;
189					gpio-controller;
190					interrupt-controller;
191					#interrupt-cells = <2>;
192					interrupts =
193					<GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
194					<GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
195					<GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
196					<GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
197					<GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
198					<GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
199					<GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
200					<GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
201					<GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
202					<GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
203					<GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
204					<GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
205				};
206
207				xtalclk: xtal-clk {
208					compatible = "marvell,armada-3700-xtal-clock";
209					clock-output-names = "xtal";
210					#clock-cells = <0>;
211				};
212
213				spi_quad_pins: spi-quad-pins {
214					groups = "spi_quad";
215					function = "spi";
216				};
217
218				spi_cs1_pins: spi-cs1-pins {
219					groups = "spi_cs1";
220					function = "spi";
221				};
222
223				i2c1_pins: i2c1-pins {
224					groups = "i2c1";
225					function = "i2c";
226				};
227
228				i2c2_pins: i2c2-pins {
229					groups = "i2c2";
230					function = "i2c";
231				};
232
233				uart1_pins: uart1-pins {
234					groups = "uart1";
235					function = "uart";
236				};
237
238				uart2_pins: uart2-pins {
239					groups = "uart2";
240					function = "uart";
241				};
242
243				mmc_pins: mmc-pins {
244					groups = "emmc_nb";
245					function = "emmc";
246				};
247			};
248
249			nb_pm: syscon@14000 {
250				compatible = "marvell,armada-3700-nb-pm",
251					     "syscon";
252				reg = <0x14000 0x60>;
253			};
254
255			comphy: phy@18300 {
256				compatible = "marvell,comphy-a3700";
257				reg = <0x18300 0x300>,
258				      <0x1F000 0x400>,
259				      <0x5C000 0x400>,
260				      <0xe0178 0x8>;
261				reg-names = "comphy",
262					    "lane1_pcie_gbe",
263					    "lane0_usb3_gbe",
264					    "lane2_sata_usb3";
265				#address-cells = <1>;
266				#size-cells = <0>;
267
268				comphy0: phy@0 {
269					reg = <0>;
270					#phy-cells = <1>;
271				};
272
273				comphy1: phy@1 {
274					reg = <1>;
275					#phy-cells = <1>;
276				};
277
278				comphy2: phy@2 {
279					reg = <2>;
280					#phy-cells = <1>;
281				};
282			};
283
284			pinctrl_sb: pinctrl@18800 {
285				compatible = "marvell,armada3710-sb-pinctrl",
286					     "syscon", "simple-mfd";
287				reg = <0x18800 0x100>, <0x18C00 0x20>;
288				/* MPP2[23:0] */
289				gpiosb: gpio {
290					#gpio-cells = <2>;
291					gpio-ranges = <&pinctrl_sb 0 0 30>;
292					gpio-controller;
293					interrupt-controller;
294					#interrupt-cells = <2>;
295					interrupts =
296					<GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
297					<GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
298					<GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
299					<GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
300					<GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
301				};
302
303				rgmii_pins: mii-pins {
304					groups = "rgmii";
305					function = "mii";
306				};
307
308				smi_pins: smi-pins {
309					groups = "smi";
310					function = "smi";
311				};
312
313				sdio_pins: sdio-pins {
314					groups = "sdio_sb";
315					function = "sdio";
316				};
317
318				pcie_reset_pins: pcie-reset-pins {
319					groups = "pcie1";
320					function = "pcie";
321				};
322
323				pcie_clkreq_pins: pcie-clkreq-pins {
324					groups = "pcie1_clkreq";
325					function = "pcie";
326				};
327			};
328
329			eth0: ethernet@30000 {
330				   compatible = "marvell,armada-3700-neta";
331				   reg = <0x30000 0x4000>;
332				   interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
333				   clocks = <&sb_periph_clk 8>;
334				   status = "disabled";
335			};
336
337			mdio: mdio@32004 {
338				#address-cells = <1>;
339				#size-cells = <0>;
340				compatible = "marvell,orion-mdio";
341				reg = <0x32004 0x4>;
342			};
343
344			eth1: ethernet@40000 {
345				compatible = "marvell,armada-3700-neta";
346				reg = <0x40000 0x4000>;
347				interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
348				clocks = <&sb_periph_clk 7>;
349				status = "disabled";
350			};
351
352			usb3: usb@58000 {
353				compatible = "marvell,armada3700-xhci",
354				"generic-xhci";
355				reg = <0x58000 0x4000>;
356				marvell,usb-misc-reg = <&usb32_syscon>;
357				interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
358				clocks = <&sb_periph_clk 12>;
359				phys = <&comphy0 0>, <&usb2_utmi_otg_phy>;
360				phy-names = "usb3-phy", "usb2-utmi-otg-phy";
361				status = "disabled";
362			};
363
364			usb2_utmi_otg_phy: phy@5d000 {
365				compatible = "marvell,a3700-utmi-otg-phy";
366				reg = <0x5d000 0x800>;
367				marvell,usb-misc-reg = <&usb32_syscon>;
368				#phy-cells = <0>;
369			};
370
371			usb32_syscon: system-controller@5d800 {
372				compatible = "marvell,armada-3700-usb2-host-device-misc",
373				"syscon";
374				reg = <0x5d800 0x800>;
375			};
376
377			usb2: usb@5e000 {
378				compatible = "marvell,armada-3700-ehci";
379				reg = <0x5e000 0x1000>;
380				marvell,usb-misc-reg = <&usb2_syscon>;
381				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
382				phys = <&usb2_utmi_host_phy>;
383				phy-names = "usb2-utmi-host-phy";
384				status = "disabled";
385			};
386
387			usb2_utmi_host_phy: phy@5f000 {
388				compatible = "marvell,a3700-utmi-host-phy";
389				reg = <0x5f000 0x800>;
390				marvell,usb-misc-reg = <&usb2_syscon>;
391				#phy-cells = <0>;
392			};
393
394			usb2_syscon: system-controller@5f800 {
395				compatible = "marvell,armada-3700-usb2-host-misc",
396				"syscon";
397				reg = <0x5f800 0x800>;
398			};
399
400			xor@60900 {
401				compatible = "marvell,armada-3700-xor";
402				reg = <0x60900 0x100>,
403				      <0x60b00 0x100>;
404
405				xor10 {
406					interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
407				};
408				xor11 {
409					interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
410				};
411			};
412
413			crypto: crypto@90000 {
414				compatible = "inside-secure,safexcel-eip97ies";
415				reg = <0x90000 0x20000>;
416				interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
417					     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
418					     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
419					     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
420					     <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
421					     <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
422				interrupt-names = "mem", "ring0", "ring1",
423						  "ring2", "ring3", "eip";
424				clocks = <&nb_periph_clk 15>;
425			};
426
427			rwtm: mailbox@b0000 {
428				compatible = "marvell,armada-3700-rwtm-mailbox";
429				reg = <0xb0000 0x100>;
430				interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
431				#mbox-cells = <1>;
432			};
433
434			sdhci1: sdhci@d0000 {
435				compatible = "marvell,armada-3700-sdhci",
436					     "marvell,sdhci-xenon";
437				reg = <0xd0000 0x300>,
438				      <0x1e808 0x4>;
439				interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
440				clocks = <&nb_periph_clk 0>;
441				clock-names = "core";
442				status = "disabled";
443			};
444
445			sdhci0: sdhci@d8000 {
446				compatible = "marvell,armada-3700-sdhci",
447					     "marvell,sdhci-xenon";
448				reg = <0xd8000 0x300>,
449				      <0x17808 0x4>;
450				interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
451				clocks = <&nb_periph_clk 0>;
452				clock-names = "core";
453				status = "disabled";
454			};
455
456			sata: sata@e0000 {
457				compatible = "marvell,armada-3700-ahci";
458				reg = <0xe0000 0x178>;
459				interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
460				clocks = <&nb_periph_clk 1>;
461				status = "disabled";
462			};
463
464			gic: interrupt-controller@1d00000 {
465				compatible = "arm,gic-v3";
466				#interrupt-cells = <3>;
467				interrupt-controller;
468				reg = <0x1d00000 0x10000>, /* GICD */
469				      <0x1d40000 0x40000>, /* GICR */
470				      <0x1d80000 0x2000>,  /* GICC */
471				      <0x1d90000 0x2000>,  /* GICH */
472				      <0x1da0000 0x20000>; /* GICV */
473				interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
474			};
475		};
476
477		pcie0: pcie@d0070000 {
478			compatible = "marvell,armada-3700-pcie";
479			device_type = "pci";
480			status = "disabled";
481			reg = <0 0xd0070000 0 0x20000>;
482			#address-cells = <3>;
483			#size-cells = <2>;
484			bus-range = <0x00 0xff>;
485			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
486			#interrupt-cells = <1>;
487			msi-parent = <&pcie0>;
488			msi-controller;
489			ranges = <0x82000000 0 0xe8000000   0 0xe8000000 0 0x1000000 /* Port 0 MEM */
490				  0x81000000 0 0xe9000000   0 0xe9000000 0 0x10000>; /* Port 0 IO*/
491			interrupt-map-mask = <0 0 0 7>;
492			interrupt-map = <0 0 0 1 &pcie_intc 0>,
493					<0 0 0 2 &pcie_intc 1>,
494					<0 0 0 3 &pcie_intc 2>,
495					<0 0 0 4 &pcie_intc 3>;
496			pcie_intc: interrupt-controller {
497				interrupt-controller;
498				#interrupt-cells = <1>;
499			};
500		};
501	};
502};
503