xref: /linux/arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts (revision 4b132aacb0768ac1e652cf517097ea6f237214b9) 
1// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
2
3/dts-v1/;
4#include <dt-bindings/gpio/gpio.h>
5#include <dt-bindings/input/input.h>
6#include "armada-372x.dtsi"
7
8/ {
9	model = "GL.iNet GL-MV1000";
10	compatible = "glinet,gl-mv1000", "marvell,armada3720";
11
12	aliases {
13		led-boot = &led_power;
14		led-failsafe = &led_power;
15		led-running = &led_power;
16		led-upgrade = &led_power;
17	};
18
19	chosen {
20		stdout-path = "serial0:115200n8";
21	};
22
23	memory@0 {
24		device_type = "memory";
25		reg = <0x00000000 0x00000000 0x00000000 0x20000000>;
26	};
27
28	vcc_sd_reg1: regulator {
29		compatible = "regulator-gpio";
30		regulator-name = "vcc_sd1";
31		regulator-min-microvolt = <1800000>;
32		regulator-max-microvolt = <3300000>;
33		regulator-boot-on;
34
35		gpios-states = <0>;
36		states = <1800000 0x1
37			3300000 0x0>;
38		enable-active-high;
39	};
40
41	keys {
42		compatible = "gpio-keys";
43
44		button-reset {
45			label = "reset";
46			linux,code = <KEY_RESTART>;
47			gpios = <&gpionb 14 GPIO_ACTIVE_LOW>;
48		};
49
50		switch {
51			label = "switch";
52			linux,code = <BTN_0>;
53			gpios = <&gpiosb 22 GPIO_ACTIVE_LOW>;
54		};
55	};
56
57	leds {
58		compatible = "gpio-leds";
59
60		led-vpn {
61			label = "green:vpn";
62			gpios = <&gpionb 11 GPIO_ACTIVE_LOW>;
63		};
64
65		led-wan {
66			label = "green:wan";
67			gpios = <&gpionb 12 GPIO_ACTIVE_LOW>;
68		};
69
70		led_power: led-power {
71			label = "green:power";
72			gpios = <&gpionb 13 GPIO_ACTIVE_LOW>;
73			default-state = "on";
74		};
75	};
76};
77
78&spi0 {
79	status = "okay";
80
81	flash@0 {
82		reg = <0>;
83		compatible = "jedec,spi-nor";
84		spi-max-frequency = <104000000>;
85		m25p,fast-read;
86		partitions {
87			compatible = "fixed-partitions";
88			#address-cells = <1>;
89			#size-cells = <1>;
90
91			partition@0 {
92				label = "firmware";
93				reg = <0 0xf0000>;
94			};
95
96			partition@f0000 {
97				label = "u-boot-env";
98				reg = <0xf0000 0x8000>;
99			};
100
101			factory: partition@f8000 {
102				label = "factory";
103				reg = <0xf8000 0x8000>;
104				read-only;
105			};
106
107			partition@100000 {
108				label = "dtb";
109				reg = <0x100000 0x10000>;
110				read-only;
111			};
112
113			partition@110000 {
114				label = "rescue";
115				reg = <0x110000 0x1000000>;
116			};
117		};
118	};
119};
120
121&sdhci1 {
122	wp-inverted;
123	bus-width = <4>;
124	cd-gpios = <&gpionb 17 GPIO_ACTIVE_LOW>;
125	marvell,pad-type = "sd";
126	no-1-8-v;
127	vqmmc-supply = <&vcc_sd_reg1>;
128	status = "okay";
129};
130
131&sdhci0 {
132	bus-width = <8>;
133	mmc-ddr-1_8v;
134	mmc-hs400-1_8v;
135	non-removable;
136	no-sd;
137	no-sdio;
138	marvell,pad-type = "fixed-1-8v";
139	status = "okay";
140};
141
142&usb3 {
143	status = "okay";
144};
145
146&usb2 {
147	status = "okay";
148};
149
150&uart0 {
151	status = "okay";
152};
153
154&mdio {
155	switch0: ethernet-switch@1 {
156		compatible = "marvell,mv88e6085";
157		reg = <1>;
158
159		dsa,member = <0 0>;
160
161		ports: ethernet-ports {
162			#address-cells = <1>;
163			#size-cells = <0>;
164
165			ethernet-port@0 {
166				reg = <0>;
167				label = "cpu";
168				ethernet = <&eth0>;
169			};
170
171			ethernet-port@1 {
172				reg = <1>;
173				label = "wan";
174				phy-handle = <&switch0phy0>;
175			};
176
177			ethernet-port@2 {
178				reg = <2>;
179				label = "lan0";
180				phy-handle = <&switch0phy1>;
181
182				nvmem-cells = <&macaddr_factory_6>;
183				nvmem-cell-names = "mac-address";
184			};
185
186			ethernet-port@3 {
187				reg = <3>;
188				label = "lan1";
189				phy-handle = <&switch0phy2>;
190
191				nvmem-cells = <&macaddr_factory_6>;
192				nvmem-cell-names = "mac-address";
193			};
194		};
195
196		mdio {
197			#address-cells = <1>;
198			#size-cells = <0>;
199
200			switch0phy0: ethernet-phy@11 {
201				reg = <0x11>;
202			};
203			switch0phy1: ethernet-phy@12 {
204				reg = <0x12>;
205			};
206			switch0phy2: ethernet-phy@13 {
207				reg = <0x13>;
208			};
209		};
210	};
211};
212
213&eth0 {
214	nvmem-cells = <&macaddr_factory_0>;
215	nvmem-cell-names = "mac-address";
216	phy-mode = "rgmii-id";
217	status = "okay";
218
219	fixed-link {
220		speed = <1000>;
221		full-duplex;
222	};
223};
224
225&factory {
226	compatible = "nvmem-cells";
227	#address-cells = <1>;
228	#size-cells = <1>;
229
230	macaddr_factory_0: macaddr@0 {
231		reg = <0x0 0x6>;
232	};
233
234	macaddr_factory_6: macaddr@6 {
235		reg = <0x6 0x6>;
236	};
237};
238