1// SPDX-License-Identifier: (GPL-2.0+ OR MIT) 2/* 3 * Device Tree For AC5. 4 * 5 * Copyright (C) 2021 Marvell 6 * Copyright (C) 2022 Allied Telesis Labs 7 */ 8 9#include <dt-bindings/gpio/gpio.h> 10#include <dt-bindings/interrupt-controller/arm-gic.h> 11 12/ { 13 model = "Marvell AC5 SoC"; 14 compatible = "marvell,ac5"; 15 interrupt-parent = <&gic>; 16 #address-cells = <2>; 17 #size-cells = <2>; 18 19 cpus { 20 #address-cells = <2>; 21 #size-cells = <0>; 22 23 cpu-map { 24 cluster0 { 25 core0 { 26 cpu = <&cpu0>; 27 }; 28 core1 { 29 cpu = <&cpu1>; 30 }; 31 }; 32 }; 33 34 cpu0: cpu@0 { 35 device_type = "cpu"; 36 compatible = "arm,cortex-a55"; 37 reg = <0x0 0x0>; 38 enable-method = "psci"; 39 next-level-cache = <&l2>; 40 }; 41 42 cpu1: cpu@1 { 43 device_type = "cpu"; 44 compatible = "arm,cortex-a55"; 45 reg = <0x0 0x100>; 46 enable-method = "psci"; 47 next-level-cache = <&l2>; 48 }; 49 50 l2: l2-cache { 51 compatible = "cache"; 52 cache-level = <2>; 53 cache-unified; 54 }; 55 }; 56 57 psci { 58 compatible = "arm,psci-0.2"; 59 method = "smc"; 60 }; 61 62 timer { 63 compatible = "arm,armv8-timer"; 64 interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>, 65 <GIC_PPI 8 IRQ_TYPE_LEVEL_HIGH>, 66 <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH>, 67 <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>; 68 }; 69 70 pmu { 71 compatible = "arm,armv8-pmuv3"; 72 interrupts = <GIC_PPI 12 IRQ_TYPE_LEVEL_HIGH>; 73 }; 74 75 soc { 76 compatible = "simple-bus"; 77 #address-cells = <2>; 78 #size-cells = <2>; 79 ranges; 80 81 internal-regs@7f000000 { 82 #address-cells = <1>; 83 #size-cells = <1>; 84 compatible = "simple-bus"; 85 /* 16M internal register @ 0x7f00_0000 */ 86 ranges = <0x0 0x0 0x7f000000 0x1000000>; 87 dma-coherent; 88 89 uart0: serial@12000 { 90 compatible = "snps,dw-apb-uart"; 91 reg = <0x12000 0x100>; 92 reg-shift = <2>; 93 interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; 94 reg-io-width = <1>; 95 clocks = <&cnm_clock>; 96 status = "okay"; 97 }; 98 99 uart1: serial@12100 { 100 compatible = "snps,dw-apb-uart"; 101 reg = <0x12100 0x100>; 102 reg-shift = <2>; 103 interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; 104 reg-io-width = <1>; 105 clocks = <&cnm_clock>; 106 status = "disabled"; 107 }; 108 109 uart2: serial@12200 { 110 compatible = "snps,dw-apb-uart"; 111 reg = <0x12200 0x100>; 112 reg-shift = <2>; 113 interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; 114 reg-io-width = <1>; 115 clocks = <&cnm_clock>; 116 status = "disabled"; 117 }; 118 119 uart3: serial@12300 { 120 compatible = "snps,dw-apb-uart"; 121 reg = <0x12300 0x100>; 122 reg-shift = <2>; 123 interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; 124 reg-io-width = <1>; 125 clocks = <&cnm_clock>; 126 status = "disabled"; 127 }; 128 129 mdio: mdio@22004 { 130 #address-cells = <1>; 131 #size-cells = <0>; 132 compatible = "marvell,orion-mdio"; 133 reg = <0x22004 0x4>; 134 clocks = <&cnm_clock>; 135 }; 136 137 i2c0: i2c@11000 { 138 compatible = "marvell,mv78230-i2c"; 139 reg = <0x11000 0x20>; 140 #address-cells = <1>; 141 #size-cells = <0>; 142 143 clocks = <&cnm_clock>; 144 clock-names = "core"; 145 interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; 146 clock-frequency = <100000>; 147 148 pinctrl-names = "default", "gpio"; 149 pinctrl-0 = <&i2c0_pins>; 150 pinctrl-1 = <&i2c0_gpio>; 151 scl-gpios = <&gpio0 26 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; 152 sda-gpios = <&gpio0 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; 153 status = "disabled"; 154 }; 155 156 i2c1: i2c@11100 { 157 compatible = "marvell,mv78230-i2c"; 158 reg = <0x11100 0x20>; 159 #address-cells = <1>; 160 #size-cells = <0>; 161 162 clocks = <&cnm_clock>; 163 clock-names = "core"; 164 interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; 165 clock-frequency = <100000>; 166 167 pinctrl-names = "default", "gpio"; 168 pinctrl-0 = <&i2c1_pins>; 169 pinctrl-1 = <&i2c1_gpio>; 170 scl-gpios = <&gpio0 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; 171 sda-gpios = <&gpio0 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; 172 status = "disabled"; 173 }; 174 175 gpio0: gpio@18100 { 176 compatible = "marvell,orion-gpio"; 177 reg = <0x18100 0x40>; 178 ngpios = <32>; 179 gpio-controller; 180 #gpio-cells = <2>; 181 gpio-ranges = <&pinctrl0 0 0 32>; 182 marvell,pwm-offset = <0x1f0>; 183 interrupt-controller; 184 #interrupt-cells = <2>; 185 interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>, 186 <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>, 187 <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>, 188 <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; 189 }; 190 191 gpio1: gpio@18140 { 192 reg = <0x18140 0x40>; 193 compatible = "marvell,orion-gpio"; 194 ngpios = <14>; 195 gpio-controller; 196 #gpio-cells = <2>; 197 gpio-ranges = <&pinctrl0 0 32 14>; 198 marvell,pwm-offset = <0x1f0>; 199 interrupt-controller; 200 #interrupt-cells = <2>; 201 interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>, 202 <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; 203 }; 204 }; 205 206 mmc_dma: bus@80500000 { 207 compatible = "simple-bus"; 208 ranges; 209 #address-cells = <0x2>; 210 #size-cells = <0x2>; 211 reg = <0x0 0x80500000 0x0 0x100000>; 212 dma-ranges = <0x0 0x0 0x2 0x0 0x0 0x80000000>; 213 dma-coherent; 214 215 sdhci: mmc@805c0000 { 216 compatible = "marvell,ac5-sdhci", 217 "marvell,armada-ap806-sdhci"; 218 reg = <0x0 0x805c0000 0x0 0x1000>; 219 interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; 220 clocks = <&emmc_clock>, <&cnm_clock>; 221 clock-names = "core", "axi"; 222 bus-width = <8>; 223 non-removable; 224 mmc-ddr-1_8v; 225 mmc-hs200-1_8v; 226 mmc-hs400-1_8v; 227 }; 228 }; 229 230 /* 231 * Dedicated section for devices behind 32bit controllers so we 232 * can configure specific DMA mapping for them 233 */ 234 behind-32bit-controller@7f000000 { 235 compatible = "simple-bus"; 236 #address-cells = <0x2>; 237 #size-cells = <0x2>; 238 ranges = <0x0 0x0 0x0 0x7f000000 0x0 0x1000000>; 239 /* Host phy ram starts at 0x200M */ 240 dma-ranges = <0x0 0x0 0x2 0x0 0x1 0x0>; 241 dma-coherent; 242 243 eth0: ethernet@20000 { 244 compatible = "marvell,armada-ac5-neta"; 245 reg = <0x0 0x20000 0x0 0x4000>; 246 interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; 247 clocks = <&cnm_clock>; 248 phy-mode = "sgmii"; 249 status = "disabled"; 250 }; 251 252 eth1: ethernet@24000 { 253 compatible = "marvell,armada-ac5-neta"; 254 reg = <0x0 0x24000 0x0 0x4000>; 255 interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; 256 clocks = <&cnm_clock>; 257 phy-mode = "sgmii"; 258 status = "disabled"; 259 }; 260 261 usb0: usb@80000 { 262 compatible = "marvell,orion-ehci"; 263 reg = <0x0 0x80000 0x0 0x500>; 264 interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; 265 status = "disabled"; 266 }; 267 268 usb1: usb@a0000 { 269 compatible = "marvell,orion-ehci"; 270 reg = <0x0 0xa0000 0x0 0x500>; 271 interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; 272 status = "disabled"; 273 }; 274 }; 275 276 pinctrl0: pinctrl@80020100 { 277 compatible = "marvell,ac5-pinctrl"; 278 reg = <0 0x80020100 0 0x20>; 279 280 i2c0_pins: i2c0-pins { 281 marvell,pins = "mpp26", "mpp27"; 282 marvell,function = "i2c0"; 283 }; 284 285 i2c0_gpio: i2c0-gpio-pins { 286 marvell,pins = "mpp26", "mpp27"; 287 marvell,function = "gpio"; 288 }; 289 290 i2c1_pins: i2c1-pins { 291 marvell,pins = "mpp20", "mpp21"; 292 marvell,function = "i2c1"; 293 }; 294 295 i2c1_gpio: i2c1-gpio-pins { 296 marvell,pins = "mpp20", "mpp21"; 297 marvell,function = "i2c1"; 298 }; 299 }; 300 301 spi0: spi@805a0000 { 302 compatible = "marvell,armada-3700-spi"; 303 reg = <0x0 0x805a0000 0x0 0x50>; 304 #address-cells = <0x1>; 305 #size-cells = <0x0>; 306 clocks = <&spi_clock>; 307 interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; 308 num-cs = <1>; 309 status = "disabled"; 310 }; 311 312 spi1: spi@805a8000 { 313 compatible = "marvell,armada-3700-spi"; 314 reg = <0x0 0x805a8000 0x0 0x50>; 315 #address-cells = <0x1>; 316 #size-cells = <0x0>; 317 clocks = <&spi_clock>; 318 interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; 319 num-cs = <1>; 320 status = "disabled"; 321 }; 322 323 nand: nand-controller@805b0000 { 324 compatible = "marvell,ac5-nand-controller"; 325 reg = <0x0 0x805b0000 0x0 0x00000054>; 326 #address-cells = <0x1>; 327 #size-cells = <0x0>; 328 interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; 329 clocks = <&nand_clock>; 330 status = "disabled"; 331 }; 332 333 gic: interrupt-controller@80600000 { 334 compatible = "arm,gic-v3"; 335 #interrupt-cells = <3>; 336 interrupt-controller; 337 reg = <0x0 0x80600000 0x0 0x10000>, /* GICD */ 338 <0x0 0x80660000 0x0 0x40000>; /* GICR */ 339 interrupts = <GIC_PPI 6 IRQ_TYPE_LEVEL_HIGH>; 340 }; 341 }; 342 343 clocks { 344 cnm_clock: cnm-clock { 345 compatible = "fixed-clock"; 346 #clock-cells = <0>; 347 clock-frequency = <328000000>; 348 }; 349 350 spi_clock: spi-clock { 351 compatible = "fixed-clock"; 352 #clock-cells = <0>; 353 clock-frequency = <200000000>; 354 }; 355 356 nand_clock: nand-clock { 357 compatible = "fixed-clock"; 358 #clock-cells = <0>; 359 clock-frequency = <400000000>; 360 }; 361 362 emmc_clock: emmc-clock { 363 compatible = "fixed-clock"; 364 #clock-cells = <0>; 365 clock-frequency = <400000000>; 366 }; 367 }; 368}; 369