1/* 2 * dts file for Hisilicon Hi6220 SoC 3 * 4 * Copyright (C) 2015, Hisilicon Ltd. 5 */ 6 7#include <dt-bindings/interrupt-controller/arm-gic.h> 8#include <dt-bindings/reset/hisi,hi6220-resets.h> 9#include <dt-bindings/clock/hi6220-clock.h> 10#include <dt-bindings/pinctrl/hisi.h> 11#include <dt-bindings/thermal/thermal.h> 12 13/ { 14 compatible = "hisilicon,hi6220"; 15 interrupt-parent = <&gic>; 16 #address-cells = <2>; 17 #size-cells = <2>; 18 19 psci { 20 compatible = "arm,psci-0.2"; 21 method = "smc"; 22 }; 23 24 cpus { 25 #address-cells = <2>; 26 #size-cells = <0>; 27 28 cpu-map { 29 cluster0 { 30 core0 { 31 cpu = <&cpu0>; 32 }; 33 core1 { 34 cpu = <&cpu1>; 35 }; 36 core2 { 37 cpu = <&cpu2>; 38 }; 39 core3 { 40 cpu = <&cpu3>; 41 }; 42 }; 43 cluster1 { 44 core0 { 45 cpu = <&cpu4>; 46 }; 47 core1 { 48 cpu = <&cpu5>; 49 }; 50 core2 { 51 cpu = <&cpu6>; 52 }; 53 core3 { 54 cpu = <&cpu7>; 55 }; 56 }; 57 }; 58 59 idle-states { 60 entry-method = "psci"; 61 62 CPU_SLEEP: cpu-sleep { 63 compatible = "arm,idle-state"; 64 local-timer-stop; 65 arm,psci-suspend-param = <0x0010000>; 66 entry-latency-us = <700>; 67 exit-latency-us = <250>; 68 min-residency-us = <1000>; 69 }; 70 71 CLUSTER_SLEEP: cluster-sleep { 72 compatible = "arm,idle-state"; 73 local-timer-stop; 74 arm,psci-suspend-param = <0x1010000>; 75 entry-latency-us = <1000>; 76 exit-latency-us = <700>; 77 min-residency-us = <2700>; 78 wakeup-latency-us = <1500>; 79 }; 80 }; 81 82 cpu0: cpu@0 { 83 compatible = "arm,cortex-a53", "arm,armv8"; 84 device_type = "cpu"; 85 reg = <0x0 0x0>; 86 enable-method = "psci"; 87 next-level-cache = <&CLUSTER0_L2>; 88 clocks = <&stub_clock 0>; 89 operating-points-v2 = <&cpu_opp_table>; 90 cooling-min-level = <4>; 91 cooling-max-level = <0>; 92 #cooling-cells = <2>; /* min followed by max */ 93 cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; 94 dynamic-power-coefficient = <311>; 95 }; 96 97 cpu1: cpu@1 { 98 compatible = "arm,cortex-a53", "arm,armv8"; 99 device_type = "cpu"; 100 reg = <0x0 0x1>; 101 enable-method = "psci"; 102 next-level-cache = <&CLUSTER0_L2>; 103 operating-points-v2 = <&cpu_opp_table>; 104 cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; 105 }; 106 107 cpu2: cpu@2 { 108 compatible = "arm,cortex-a53", "arm,armv8"; 109 device_type = "cpu"; 110 reg = <0x0 0x2>; 111 enable-method = "psci"; 112 next-level-cache = <&CLUSTER0_L2>; 113 operating-points-v2 = <&cpu_opp_table>; 114 cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; 115 }; 116 117 cpu3: cpu@3 { 118 compatible = "arm,cortex-a53", "arm,armv8"; 119 device_type = "cpu"; 120 reg = <0x0 0x3>; 121 enable-method = "psci"; 122 next-level-cache = <&CLUSTER0_L2>; 123 operating-points-v2 = <&cpu_opp_table>; 124 cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; 125 }; 126 127 cpu4: cpu@100 { 128 compatible = "arm,cortex-a53", "arm,armv8"; 129 device_type = "cpu"; 130 reg = <0x0 0x100>; 131 enable-method = "psci"; 132 next-level-cache = <&CLUSTER1_L2>; 133 operating-points-v2 = <&cpu_opp_table>; 134 cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; 135 }; 136 137 cpu5: cpu@101 { 138 compatible = "arm,cortex-a53", "arm,armv8"; 139 device_type = "cpu"; 140 reg = <0x0 0x101>; 141 enable-method = "psci"; 142 next-level-cache = <&CLUSTER1_L2>; 143 operating-points-v2 = <&cpu_opp_table>; 144 cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; 145 }; 146 147 cpu6: cpu@102 { 148 compatible = "arm,cortex-a53", "arm,armv8"; 149 device_type = "cpu"; 150 reg = <0x0 0x102>; 151 enable-method = "psci"; 152 next-level-cache = <&CLUSTER1_L2>; 153 operating-points-v2 = <&cpu_opp_table>; 154 cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; 155 }; 156 157 cpu7: cpu@103 { 158 compatible = "arm,cortex-a53", "arm,armv8"; 159 device_type = "cpu"; 160 reg = <0x0 0x103>; 161 enable-method = "psci"; 162 next-level-cache = <&CLUSTER1_L2>; 163 operating-points-v2 = <&cpu_opp_table>; 164 cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; 165 }; 166 167 CLUSTER0_L2: l2-cache0 { 168 compatible = "cache"; 169 }; 170 171 CLUSTER1_L2: l2-cache1 { 172 compatible = "cache"; 173 }; 174 }; 175 176 cpu_opp_table: cpu_opp_table { 177 compatible = "operating-points-v2"; 178 opp-shared; 179 180 opp00 { 181 opp-hz = /bits/ 64 <208000000>; 182 opp-microvolt = <1040000>; 183 clock-latency-ns = <500000>; 184 }; 185 opp01 { 186 opp-hz = /bits/ 64 <432000000>; 187 opp-microvolt = <1040000>; 188 clock-latency-ns = <500000>; 189 }; 190 opp02 { 191 opp-hz = /bits/ 64 <729000000>; 192 opp-microvolt = <1090000>; 193 clock-latency-ns = <500000>; 194 }; 195 opp03 { 196 opp-hz = /bits/ 64 <960000000>; 197 opp-microvolt = <1180000>; 198 clock-latency-ns = <500000>; 199 }; 200 opp04 { 201 opp-hz = /bits/ 64 <1200000000>; 202 opp-microvolt = <1330000>; 203 clock-latency-ns = <500000>; 204 }; 205 }; 206 207 gic: interrupt-controller@f6801000 { 208 compatible = "arm,gic-400"; 209 reg = <0x0 0xf6801000 0 0x1000>, /* GICD */ 210 <0x0 0xf6802000 0 0x2000>, /* GICC */ 211 <0x0 0xf6804000 0 0x2000>, /* GICH */ 212 <0x0 0xf6806000 0 0x2000>; /* GICV */ 213 #address-cells = <0>; 214 #interrupt-cells = <3>; 215 interrupt-controller; 216 interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>; 217 }; 218 219 timer { 220 compatible = "arm,armv8-timer"; 221 interrupt-parent = <&gic>; 222 interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, 223 <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, 224 <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, 225 <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; 226 }; 227 228 soc { 229 compatible = "simple-bus"; 230 #address-cells = <2>; 231 #size-cells = <2>; 232 ranges; 233 234 sram: sram@fff80000 { 235 compatible = "hisilicon,hi6220-sramctrl", "syscon"; 236 reg = <0x0 0xfff80000 0x0 0x12000>; 237 }; 238 239 ao_ctrl: ao_ctrl@f7800000 { 240 compatible = "hisilicon,hi6220-aoctrl", "syscon"; 241 reg = <0x0 0xf7800000 0x0 0x2000>; 242 #clock-cells = <1>; 243 }; 244 245 sys_ctrl: sys_ctrl@f7030000 { 246 compatible = "hisilicon,hi6220-sysctrl", "syscon"; 247 reg = <0x0 0xf7030000 0x0 0x2000>; 248 #clock-cells = <1>; 249 #reset-cells = <1>; 250 }; 251 252 media_ctrl: media_ctrl@f4410000 { 253 compatible = "hisilicon,hi6220-mediactrl", "syscon"; 254 reg = <0x0 0xf4410000 0x0 0x1000>; 255 #clock-cells = <1>; 256 #reset-cells = <1>; 257 }; 258 259 pm_ctrl: pm_ctrl@f7032000 { 260 compatible = "hisilicon,hi6220-pmctrl", "syscon"; 261 reg = <0x0 0xf7032000 0x0 0x1000>; 262 #clock-cells = <1>; 263 }; 264 265 medianoc_ade: medianoc_ade@f4520000 { 266 compatible = "syscon"; 267 reg = <0x0 0xf4520000 0x0 0x4000>; 268 }; 269 270 stub_clock: stub_clock { 271 compatible = "hisilicon,hi6220-stub-clk"; 272 hisilicon,hi6220-clk-sram = <&sram>; 273 #clock-cells = <1>; 274 mbox-names = "mbox-tx"; 275 mboxes = <&mailbox 1 0 11>; 276 }; 277 278 uart0: uart@f8015000 { /* console */ 279 compatible = "arm,pl011", "arm,primecell"; 280 reg = <0x0 0xf8015000 0x0 0x1000>; 281 interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; 282 clocks = <&ao_ctrl HI6220_UART0_PCLK>, 283 <&ao_ctrl HI6220_UART0_PCLK>; 284 clock-names = "uartclk", "apb_pclk"; 285 }; 286 287 uart1: uart@f7111000 { 288 compatible = "arm,pl011", "arm,primecell"; 289 reg = <0x0 0xf7111000 0x0 0x1000>; 290 interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; 291 clocks = <&sys_ctrl HI6220_UART1_PCLK>, 292 <&sys_ctrl HI6220_UART1_PCLK>; 293 clock-names = "uartclk", "apb_pclk"; 294 pinctrl-names = "default"; 295 pinctrl-0 = <&uart1_pmx_func &uart1_cfg_func1 &uart1_cfg_func2>; 296 status = "disabled"; 297 }; 298 299 uart2: uart@f7112000 { 300 compatible = "arm,pl011", "arm,primecell"; 301 reg = <0x0 0xf7112000 0x0 0x1000>; 302 interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; 303 clocks = <&sys_ctrl HI6220_UART2_PCLK>, 304 <&sys_ctrl HI6220_UART2_PCLK>; 305 clock-names = "uartclk", "apb_pclk"; 306 pinctrl-names = "default"; 307 pinctrl-0 = <&uart2_pmx_func &uart2_cfg_func>; 308 status = "disabled"; 309 }; 310 311 uart3: uart@f7113000 { 312 compatible = "arm,pl011", "arm,primecell"; 313 reg = <0x0 0xf7113000 0x0 0x1000>; 314 interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; 315 clocks = <&sys_ctrl HI6220_UART3_PCLK>, 316 <&sys_ctrl HI6220_UART3_PCLK>; 317 clock-names = "uartclk", "apb_pclk"; 318 pinctrl-names = "default"; 319 pinctrl-0 = <&uart3_pmx_func &uart3_cfg_func>; 320 status = "disabled"; 321 }; 322 323 uart4: uart@f7114000 { 324 compatible = "arm,pl011", "arm,primecell"; 325 reg = <0x0 0xf7114000 0x0 0x1000>; 326 interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; 327 clocks = <&sys_ctrl HI6220_UART4_PCLK>, 328 <&sys_ctrl HI6220_UART4_PCLK>; 329 clock-names = "uartclk", "apb_pclk"; 330 pinctrl-names = "default"; 331 pinctrl-0 = <&uart4_pmx_func &uart4_cfg_func>; 332 status = "disabled"; 333 }; 334 335 dual_timer0: timer@f8008000 { 336 compatible = "arm,sp804", "arm,primecell"; 337 reg = <0x0 0xf8008000 0x0 0x1000>; 338 interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, 339 <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; 340 clocks = <&ao_ctrl HI6220_TIMER0_PCLK>, 341 <&ao_ctrl HI6220_TIMER0_PCLK>, 342 <&ao_ctrl HI6220_TIMER0_PCLK>; 343 clock-names = "timer1", "timer2", "apb_pclk"; 344 }; 345 346 rtc0: rtc@f8003000 { 347 compatible = "arm,pl031", "arm,primecell"; 348 reg = <0x0 0xf8003000 0x0 0x1000>; 349 interrupts = <0 12 4>; 350 clocks = <&ao_ctrl HI6220_RTC0_PCLK>; 351 clock-names = "apb_pclk"; 352 }; 353 354 rtc1: rtc@f8004000 { 355 compatible = "arm,pl031", "arm,primecell"; 356 reg = <0x0 0xf8004000 0x0 0x1000>; 357 interrupts = <0 8 4>; 358 clocks = <&ao_ctrl HI6220_RTC1_PCLK>; 359 clock-names = "apb_pclk"; 360 }; 361 362 pmx0: pinmux@f7010000 { 363 compatible = "pinctrl-single"; 364 reg = <0x0 0xf7010000 0x0 0x27c>; 365 #address-cells = <1>; 366 #size-cells = <1>; 367 #pinctrl-cells = <1>; 368 #gpio-range-cells = <3>; 369 pinctrl-single,register-width = <32>; 370 pinctrl-single,function-mask = <7>; 371 pinctrl-single,gpio-range = < 372 &range 80 8 MUX_M0 /* gpio 3: [0..7] */ 373 &range 88 8 MUX_M0 /* gpio 4: [0..7] */ 374 &range 96 8 MUX_M0 /* gpio 5: [0..7] */ 375 &range 104 8 MUX_M0 /* gpio 6: [0..7] */ 376 &range 112 8 MUX_M0 /* gpio 7: [0..7] */ 377 &range 120 2 MUX_M0 /* gpio 8: [0..1] */ 378 &range 2 6 MUX_M1 /* gpio 8: [2..7] */ 379 &range 8 8 MUX_M1 /* gpio 9: [0..7] */ 380 &range 0 1 MUX_M1 /* gpio 10: [0] */ 381 &range 16 7 MUX_M1 /* gpio 10: [1..7] */ 382 &range 23 3 MUX_M1 /* gpio 11: [0..2] */ 383 &range 28 5 MUX_M1 /* gpio 11: [3..7] */ 384 &range 33 3 MUX_M1 /* gpio 12: [0..2] */ 385 &range 43 5 MUX_M1 /* gpio 12: [3..7] */ 386 &range 48 8 MUX_M1 /* gpio 13: [0..7] */ 387 &range 56 8 MUX_M1 /* gpio 14: [0..7] */ 388 &range 74 6 MUX_M1 /* gpio 15: [0..5] */ 389 &range 122 1 MUX_M1 /* gpio 15: [6] */ 390 &range 126 1 MUX_M1 /* gpio 15: [7] */ 391 &range 127 8 MUX_M1 /* gpio 16: [0..7] */ 392 &range 135 8 MUX_M1 /* gpio 17: [0..7] */ 393 &range 143 8 MUX_M1 /* gpio 18: [0..7] */ 394 &range 151 8 MUX_M1 /* gpio 19: [0..7] */ 395 >; 396 range: gpio-range { 397 #pinctrl-single,gpio-range-cells = <3>; 398 }; 399 }; 400 401 pmx1: pinmux@f7010800 { 402 compatible = "pinconf-single"; 403 reg = <0x0 0xf7010800 0x0 0x28c>; 404 #address-cells = <1>; 405 #size-cells = <1>; 406 #pinctrl-cells = <1>; 407 pinctrl-single,register-width = <32>; 408 }; 409 410 pmx2: pinmux@f8001800 { 411 compatible = "pinconf-single"; 412 reg = <0x0 0xf8001800 0x0 0x78>; 413 #address-cells = <1>; 414 #size-cells = <1>; 415 #pinctrl-cells = <1>; 416 pinctrl-single,register-width = <32>; 417 }; 418 419 gpio0: gpio@f8011000 { 420 compatible = "arm,pl061", "arm,primecell"; 421 reg = <0x0 0xf8011000 0x0 0x1000>; 422 interrupts = <0 52 0x4>; 423 gpio-controller; 424 #gpio-cells = <2>; 425 interrupt-controller; 426 #interrupt-cells = <2>; 427 clocks = <&ao_ctrl 2>; 428 clock-names = "apb_pclk"; 429 }; 430 431 gpio1: gpio@f8012000 { 432 compatible = "arm,pl061", "arm,primecell"; 433 reg = <0x0 0xf8012000 0x0 0x1000>; 434 interrupts = <0 53 0x4>; 435 gpio-controller; 436 #gpio-cells = <2>; 437 interrupt-controller; 438 #interrupt-cells = <2>; 439 clocks = <&ao_ctrl 2>; 440 clock-names = "apb_pclk"; 441 }; 442 443 gpio2: gpio@f8013000 { 444 compatible = "arm,pl061", "arm,primecell"; 445 reg = <0x0 0xf8013000 0x0 0x1000>; 446 interrupts = <0 54 0x4>; 447 gpio-controller; 448 #gpio-cells = <2>; 449 interrupt-controller; 450 #interrupt-cells = <2>; 451 clocks = <&ao_ctrl 2>; 452 clock-names = "apb_pclk"; 453 }; 454 455 gpio3: gpio@f8014000 { 456 compatible = "arm,pl061", "arm,primecell"; 457 reg = <0x0 0xf8014000 0x0 0x1000>; 458 interrupts = <0 55 0x4>; 459 gpio-controller; 460 #gpio-cells = <2>; 461 gpio-ranges = <&pmx0 0 80 8>; 462 interrupt-controller; 463 #interrupt-cells = <2>; 464 clocks = <&ao_ctrl 2>; 465 clock-names = "apb_pclk"; 466 }; 467 468 gpio4: gpio@f7020000 { 469 compatible = "arm,pl061", "arm,primecell"; 470 reg = <0x0 0xf7020000 0x0 0x1000>; 471 interrupts = <0 56 0x4>; 472 gpio-controller; 473 #gpio-cells = <2>; 474 gpio-ranges = <&pmx0 0 88 8>; 475 interrupt-controller; 476 #interrupt-cells = <2>; 477 clocks = <&ao_ctrl 2>; 478 clock-names = "apb_pclk"; 479 }; 480 481 gpio5: gpio@f7021000 { 482 compatible = "arm,pl061", "arm,primecell"; 483 reg = <0x0 0xf7021000 0x0 0x1000>; 484 interrupts = <0 57 0x4>; 485 gpio-controller; 486 #gpio-cells = <2>; 487 gpio-ranges = <&pmx0 0 96 8>; 488 interrupt-controller; 489 #interrupt-cells = <2>; 490 clocks = <&ao_ctrl 2>; 491 clock-names = "apb_pclk"; 492 }; 493 494 gpio6: gpio@f7022000 { 495 compatible = "arm,pl061", "arm,primecell"; 496 reg = <0x0 0xf7022000 0x0 0x1000>; 497 interrupts = <0 58 0x4>; 498 gpio-controller; 499 #gpio-cells = <2>; 500 gpio-ranges = <&pmx0 0 104 8>; 501 interrupt-controller; 502 #interrupt-cells = <2>; 503 clocks = <&ao_ctrl 2>; 504 clock-names = "apb_pclk"; 505 }; 506 507 gpio7: gpio@f7023000 { 508 compatible = "arm,pl061", "arm,primecell"; 509 reg = <0x0 0xf7023000 0x0 0x1000>; 510 interrupts = <0 59 0x4>; 511 gpio-controller; 512 #gpio-cells = <2>; 513 gpio-ranges = <&pmx0 0 112 8>; 514 interrupt-controller; 515 #interrupt-cells = <2>; 516 clocks = <&ao_ctrl 2>; 517 clock-names = "apb_pclk"; 518 }; 519 520 gpio8: gpio@f7024000 { 521 compatible = "arm,pl061", "arm,primecell"; 522 reg = <0x0 0xf7024000 0x0 0x1000>; 523 interrupts = <0 60 0x4>; 524 gpio-controller; 525 #gpio-cells = <2>; 526 gpio-ranges = <&pmx0 0 120 2 &pmx0 2 2 6>; 527 interrupt-controller; 528 #interrupt-cells = <2>; 529 clocks = <&ao_ctrl 2>; 530 clock-names = "apb_pclk"; 531 }; 532 533 gpio9: gpio@f7025000 { 534 compatible = "arm,pl061", "arm,primecell"; 535 reg = <0x0 0xf7025000 0x0 0x1000>; 536 interrupts = <0 61 0x4>; 537 gpio-controller; 538 #gpio-cells = <2>; 539 gpio-ranges = <&pmx0 0 8 8>; 540 interrupt-controller; 541 #interrupt-cells = <2>; 542 clocks = <&ao_ctrl 2>; 543 clock-names = "apb_pclk"; 544 }; 545 546 gpio10: gpio@f7026000 { 547 compatible = "arm,pl061", "arm,primecell"; 548 reg = <0x0 0xf7026000 0x0 0x1000>; 549 interrupts = <0 62 0x4>; 550 gpio-controller; 551 #gpio-cells = <2>; 552 gpio-ranges = <&pmx0 0 0 1 &pmx0 1 16 7>; 553 interrupt-controller; 554 #interrupt-cells = <2>; 555 clocks = <&ao_ctrl 2>; 556 clock-names = "apb_pclk"; 557 }; 558 559 gpio11: gpio@f7027000 { 560 compatible = "arm,pl061", "arm,primecell"; 561 reg = <0x0 0xf7027000 0x0 0x1000>; 562 interrupts = <0 63 0x4>; 563 gpio-controller; 564 #gpio-cells = <2>; 565 gpio-ranges = <&pmx0 0 23 3 &pmx0 3 28 5>; 566 interrupt-controller; 567 #interrupt-cells = <2>; 568 clocks = <&ao_ctrl 2>; 569 clock-names = "apb_pclk"; 570 }; 571 572 gpio12: gpio@f7028000 { 573 compatible = "arm,pl061", "arm,primecell"; 574 reg = <0x0 0xf7028000 0x0 0x1000>; 575 interrupts = <0 64 0x4>; 576 gpio-controller; 577 #gpio-cells = <2>; 578 gpio-ranges = <&pmx0 0 33 3 &pmx0 3 43 5>; 579 interrupt-controller; 580 #interrupt-cells = <2>; 581 clocks = <&ao_ctrl 2>; 582 clock-names = "apb_pclk"; 583 }; 584 585 gpio13: gpio@f7029000 { 586 compatible = "arm,pl061", "arm,primecell"; 587 reg = <0x0 0xf7029000 0x0 0x1000>; 588 interrupts = <0 65 0x4>; 589 gpio-controller; 590 #gpio-cells = <2>; 591 gpio-ranges = <&pmx0 0 48 8>; 592 interrupt-controller; 593 #interrupt-cells = <2>; 594 clocks = <&ao_ctrl 2>; 595 clock-names = "apb_pclk"; 596 }; 597 598 gpio14: gpio@f702a000 { 599 compatible = "arm,pl061", "arm,primecell"; 600 reg = <0x0 0xf702a000 0x0 0x1000>; 601 interrupts = <0 66 0x4>; 602 gpio-controller; 603 #gpio-cells = <2>; 604 gpio-ranges = <&pmx0 0 56 8>; 605 interrupt-controller; 606 #interrupt-cells = <2>; 607 clocks = <&ao_ctrl 2>; 608 clock-names = "apb_pclk"; 609 }; 610 611 gpio15: gpio@f702b000 { 612 compatible = "arm,pl061", "arm,primecell"; 613 reg = <0x0 0xf702b000 0x0 0x1000>; 614 interrupts = <0 67 0x4>; 615 gpio-controller; 616 #gpio-cells = <2>; 617 gpio-ranges = < 618 &pmx0 0 74 6 619 &pmx0 6 122 1 620 &pmx0 7 126 1 621 >; 622 interrupt-controller; 623 #interrupt-cells = <2>; 624 clocks = <&ao_ctrl 2>; 625 clock-names = "apb_pclk"; 626 }; 627 628 gpio16: gpio@f702c000 { 629 compatible = "arm,pl061", "arm,primecell"; 630 reg = <0x0 0xf702c000 0x0 0x1000>; 631 interrupts = <0 68 0x4>; 632 gpio-controller; 633 #gpio-cells = <2>; 634 gpio-ranges = <&pmx0 0 127 8>; 635 interrupt-controller; 636 #interrupt-cells = <2>; 637 clocks = <&ao_ctrl 2>; 638 clock-names = "apb_pclk"; 639 }; 640 641 gpio17: gpio@f702d000 { 642 compatible = "arm,pl061", "arm,primecell"; 643 reg = <0x0 0xf702d000 0x0 0x1000>; 644 interrupts = <0 69 0x4>; 645 gpio-controller; 646 #gpio-cells = <2>; 647 gpio-ranges = <&pmx0 0 135 8>; 648 interrupt-controller; 649 #interrupt-cells = <2>; 650 clocks = <&ao_ctrl 2>; 651 clock-names = "apb_pclk"; 652 }; 653 654 gpio18: gpio@f702e000 { 655 compatible = "arm,pl061", "arm,primecell"; 656 reg = <0x0 0xf702e000 0x0 0x1000>; 657 interrupts = <0 70 0x4>; 658 gpio-controller; 659 #gpio-cells = <2>; 660 gpio-ranges = <&pmx0 0 143 8>; 661 interrupt-controller; 662 #interrupt-cells = <2>; 663 clocks = <&ao_ctrl 2>; 664 clock-names = "apb_pclk"; 665 }; 666 667 gpio19: gpio@f702f000 { 668 compatible = "arm,pl061", "arm,primecell"; 669 reg = <0x0 0xf702f000 0x0 0x1000>; 670 interrupts = <0 71 0x4>; 671 gpio-controller; 672 #gpio-cells = <2>; 673 gpio-ranges = <&pmx0 0 151 8>; 674 interrupt-controller; 675 #interrupt-cells = <2>; 676 clocks = <&ao_ctrl 2>; 677 clock-names = "apb_pclk"; 678 }; 679 680 spi0: spi@f7106000 { 681 compatible = "arm,pl022", "arm,primecell"; 682 reg = <0x0 0xf7106000 0x0 0x1000>; 683 interrupts = <0 50 4>; 684 bus-id = <0>; 685 enable-dma = <0>; 686 clocks = <&sys_ctrl HI6220_SPI_CLK>; 687 clock-names = "apb_pclk"; 688 pinctrl-names = "default"; 689 pinctrl-0 = <&spi0_pmx_func &spi0_cfg_func>; 690 num-cs = <1>; 691 cs-gpios = <&gpio6 2 0>; 692 status = "disabled"; 693 }; 694 695 i2c0: i2c@f7100000 { 696 compatible = "snps,designware-i2c"; 697 reg = <0x0 0xf7100000 0x0 0x1000>; 698 interrupts = <0 44 4>; 699 clocks = <&sys_ctrl HI6220_I2C0_CLK>; 700 i2c-sda-hold-time-ns = <300>; 701 pinctrl-names = "default"; 702 pinctrl-0 = <&i2c0_pmx_func &i2c0_cfg_func>; 703 status = "disabled"; 704 }; 705 706 i2c1: i2c@f7101000 { 707 compatible = "snps,designware-i2c"; 708 reg = <0x0 0xf7101000 0x0 0x1000>; 709 clocks = <&sys_ctrl HI6220_I2C1_CLK>; 710 interrupts = <0 45 4>; 711 i2c-sda-hold-time-ns = <300>; 712 pinctrl-names = "default"; 713 pinctrl-0 = <&i2c1_pmx_func &i2c1_cfg_func>; 714 status = "disabled"; 715 }; 716 717 i2c2: i2c@f7102000 { 718 compatible = "snps,designware-i2c"; 719 reg = <0x0 0xf7102000 0x0 0x1000>; 720 clocks = <&sys_ctrl HI6220_I2C2_CLK>; 721 interrupts = <0 46 4>; 722 i2c-sda-hold-time-ns = <300>; 723 pinctrl-names = "default"; 724 pinctrl-0 = <&i2c2_pmx_func &i2c2_cfg_func>; 725 status = "disabled"; 726 }; 727 728 fixed_5v_hub: regulator@0 { 729 compatible = "regulator-fixed"; 730 regulator-name = "fixed_5v_hub"; 731 regulator-min-microvolt = <5000000>; 732 regulator-max-microvolt = <5000000>; 733 regulator-boot-on; 734 gpio = <&gpio0 7 0>; 735 regulator-always-on; 736 }; 737 738 usb_phy: usbphy { 739 compatible = "hisilicon,hi6220-usb-phy"; 740 #phy-cells = <0>; 741 phy-supply = <&fixed_5v_hub>; 742 hisilicon,peripheral-syscon = <&sys_ctrl>; 743 }; 744 745 usb: usb@f72c0000 { 746 compatible = "hisilicon,hi6220-usb"; 747 reg = <0x0 0xf72c0000 0x0 0x40000>; 748 phys = <&usb_phy>; 749 phy-names = "usb2-phy"; 750 clocks = <&sys_ctrl HI6220_USBOTG_HCLK>; 751 clock-names = "otg"; 752 dr_mode = "otg"; 753 g-rx-fifo-size = <512>; 754 g-np-tx-fifo-size = <128>; 755 g-tx-fifo-size = <128 128 128 128 128 128>; 756 interrupts = <0 77 0x4>; 757 }; 758 759 mailbox: mailbox@f7510000 { 760 compatible = "hisilicon,hi6220-mbox"; 761 reg = <0x0 0xf7510000 0x0 0x1000>, /* IPC_S */ 762 <0x0 0x06dff800 0x0 0x0800>; /* Mailbox buffer */ 763 interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; 764 #mbox-cells = <3>; 765 }; 766 767 dwmmc_0: dwmmc0@f723d000 { 768 compatible = "hisilicon,hi6220-dw-mshc"; 769 num-slots = <0x1>; 770 cap-mmc-highspeed; 771 non-removable; 772 reg = <0x0 0xf723d000 0x0 0x1000>; 773 interrupts = <0x0 0x48 0x4>; 774 clocks = <&sys_ctrl 2>, <&sys_ctrl 1>; 775 clock-names = "ciu", "biu"; 776 resets = <&sys_ctrl PERIPH_RSTDIS0_MMC0>; 777 bus-width = <0x8>; 778 vmmc-supply = <&ldo19>; 779 pinctrl-names = "default"; 780 pinctrl-0 = <&emmc_pmx_func &emmc_clk_cfg_func 781 &emmc_cfg_func &emmc_rst_cfg_func>; 782 }; 783 784 dwmmc_1: dwmmc1@f723e000 { 785 compatible = "hisilicon,hi6220-dw-mshc"; 786 num-slots = <0x1>; 787 card-detect-delay = <200>; 788 hisilicon,peripheral-syscon = <&ao_ctrl>; 789 cap-sd-highspeed; 790 sd-uhs-sdr12; 791 sd-uhs-sdr25; 792 sd-uhs-sdr50; 793 reg = <0x0 0xf723e000 0x0 0x1000>; 794 interrupts = <0x0 0x49 0x4>; 795 #address-cells = <0x1>; 796 #size-cells = <0x0>; 797 clocks = <&sys_ctrl 4>, <&sys_ctrl 3>; 798 clock-names = "ciu", "biu"; 799 resets = <&sys_ctrl PERIPH_RSTDIS0_MMC1>; 800 vqmmc-supply = <&ldo7>; 801 vmmc-supply = <&ldo10>; 802 bus-width = <0x4>; 803 disable-wp; 804 cd-gpios = <&gpio1 0 1>; 805 pinctrl-names = "default", "idle"; 806 pinctrl-0 = <&sd_pmx_func &sd_clk_cfg_func &sd_cfg_func>; 807 pinctrl-1 = <&sd_pmx_idle &sd_clk_cfg_idle &sd_cfg_idle>; 808 }; 809 810 dwmmc_2: dwmmc2@f723f000 { 811 compatible = "hisilicon,hi6220-dw-mshc"; 812 num-slots = <0x1>; 813 reg = <0x0 0xf723f000 0x0 0x1000>; 814 interrupts = <0x0 0x4a 0x4>; 815 clocks = <&sys_ctrl HI6220_MMC2_CIUCLK>, <&sys_ctrl HI6220_MMC2_CLK>; 816 clock-names = "ciu", "biu"; 817 resets = <&sys_ctrl PERIPH_RSTDIS0_MMC2>; 818 bus-width = <0x4>; 819 broken-cd; 820 pinctrl-names = "default", "idle"; 821 pinctrl-0 = <&sdio_pmx_func &sdio_clk_cfg_func &sdio_cfg_func>; 822 pinctrl-1 = <&sdio_pmx_idle &sdio_clk_cfg_idle &sdio_cfg_idle>; 823 }; 824 825 tsensor: tsensor@0,f7030700 { 826 compatible = "hisilicon,tsensor"; 827 reg = <0x0 0xf7030700 0x0 0x1000>; 828 interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; 829 clocks = <&sys_ctrl 22>; 830 clock-names = "thermal_clk"; 831 #thermal-sensor-cells = <1>; 832 }; 833 834 thermal-zones { 835 836 cls0: cls0 { 837 polling-delay = <1000>; 838 polling-delay-passive = <100>; 839 sustainable-power = <3326>; 840 841 /* sensor ID */ 842 thermal-sensors = <&tsensor 2>; 843 844 trips { 845 threshold: trip-point@0 { 846 temperature = <65000>; 847 hysteresis = <0>; 848 type = "passive"; 849 }; 850 851 target: trip-point@1 { 852 temperature = <75000>; 853 hysteresis = <0>; 854 type = "passive"; 855 }; 856 }; 857 858 cooling-maps { 859 map0 { 860 trip = <&target>; 861 cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; 862 }; 863 }; 864 }; 865 }; 866 867 ade: ade@f4100000 { 868 compatible = "hisilicon,hi6220-ade"; 869 reg = <0x0 0xf4100000 0x0 0x7800>; 870 reg-names = "ade_base"; 871 hisilicon,noc-syscon = <&medianoc_ade>; 872 resets = <&media_ctrl MEDIA_ADE>; 873 interrupts = <0 115 4>; /* ldi interrupt */ 874 875 clocks = <&media_ctrl HI6220_ADE_CORE>, 876 <&media_ctrl HI6220_CODEC_JPEG>, 877 <&media_ctrl HI6220_ADE_PIX_SRC>; 878 /*clock name*/ 879 clock-names = "clk_ade_core", 880 "clk_codec_jpeg", 881 "clk_ade_pix"; 882 883 assigned-clocks = <&media_ctrl HI6220_ADE_CORE>, 884 <&media_ctrl HI6220_CODEC_JPEG>; 885 assigned-clock-rates = <360000000>, <288000000>; 886 dma-coherent; 887 status = "disabled"; 888 889 port { 890 ade_out: endpoint { 891 remote-endpoint = <&dsi_in>; 892 }; 893 }; 894 }; 895 896 dsi: dsi@f4107800 { 897 compatible = "hisilicon,hi6220-dsi"; 898 reg = <0x0 0xf4107800 0x0 0x100>; 899 clocks = <&media_ctrl HI6220_DSI_PCLK>; 900 clock-names = "pclk"; 901 status = "disabled"; 902 903 ports { 904 #address-cells = <1>; 905 #size-cells = <0>; 906 907 /* 0 for input port */ 908 port@0 { 909 reg = <0>; 910 dsi_in: endpoint { 911 remote-endpoint = <&ade_out>; 912 }; 913 }; 914 }; 915 }; 916 }; 917}; 918