1// SPDX-License-Identifier: (GPL-2.0+ OR MIT) 2/* 3 * Copyright 2022 NXP 4 */ 5 6#include <dt-bindings/clock/imx93-clock.h> 7#include <dt-bindings/gpio/gpio.h> 8#include <dt-bindings/input/input.h> 9#include <dt-bindings/interrupt-controller/arm-gic.h> 10#include <dt-bindings/power/fsl,imx93-power.h> 11#include <dt-bindings/thermal/thermal.h> 12 13#include "imx93-pinfunc.h" 14 15/ { 16 interrupt-parent = <&gic>; 17 #address-cells = <2>; 18 #size-cells = <2>; 19 20 aliases { 21 gpio0 = &gpio1; 22 gpio1 = &gpio2; 23 gpio2 = &gpio3; 24 gpio3 = &gpio4; 25 i2c0 = &lpi2c1; 26 i2c1 = &lpi2c2; 27 i2c2 = &lpi2c3; 28 i2c3 = &lpi2c4; 29 i2c4 = &lpi2c5; 30 i2c5 = &lpi2c6; 31 i2c6 = &lpi2c7; 32 i2c7 = &lpi2c8; 33 mmc0 = &usdhc1; 34 mmc1 = &usdhc2; 35 mmc2 = &usdhc3; 36 serial0 = &lpuart1; 37 serial1 = &lpuart2; 38 serial2 = &lpuart3; 39 serial3 = &lpuart4; 40 serial4 = &lpuart5; 41 serial5 = &lpuart6; 42 serial6 = &lpuart7; 43 serial7 = &lpuart8; 44 }; 45 46 cpus { 47 #address-cells = <1>; 48 #size-cells = <0>; 49 50 idle-states { 51 entry-method = "psci"; 52 53 cpu_pd_wait: cpu-pd-wait { 54 compatible = "arm,idle-state"; 55 arm,psci-suspend-param = <0x0010033>; 56 local-timer-stop; 57 entry-latency-us = <10000>; 58 exit-latency-us = <7000>; 59 min-residency-us = <27000>; 60 wakeup-latency-us = <15000>; 61 }; 62 }; 63 64 A55_0: cpu@0 { 65 device_type = "cpu"; 66 compatible = "arm,cortex-a55"; 67 reg = <0x0>; 68 enable-method = "psci"; 69 #cooling-cells = <2>; 70 cpu-idle-states = <&cpu_pd_wait>; 71 }; 72 73 A55_1: cpu@100 { 74 device_type = "cpu"; 75 compatible = "arm,cortex-a55"; 76 reg = <0x100>; 77 enable-method = "psci"; 78 #cooling-cells = <2>; 79 cpu-idle-states = <&cpu_pd_wait>; 80 }; 81 82 }; 83 84 osc_32k: clock-osc-32k { 85 compatible = "fixed-clock"; 86 #clock-cells = <0>; 87 clock-frequency = <32768>; 88 clock-output-names = "osc_32k"; 89 }; 90 91 osc_24m: clock-osc-24m { 92 compatible = "fixed-clock"; 93 #clock-cells = <0>; 94 clock-frequency = <24000000>; 95 clock-output-names = "osc_24m"; 96 }; 97 98 clk_ext1: clock-ext1 { 99 compatible = "fixed-clock"; 100 #clock-cells = <0>; 101 clock-frequency = <133000000>; 102 clock-output-names = "clk_ext1"; 103 }; 104 105 pmu { 106 compatible = "arm,cortex-a55-pmu"; 107 interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; 108 }; 109 110 psci { 111 compatible = "arm,psci-1.0"; 112 method = "smc"; 113 }; 114 115 timer { 116 compatible = "arm,armv8-timer"; 117 interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, 118 <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, 119 <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, 120 <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>; 121 clock-frequency = <24000000>; 122 arm,no-tick-in-suspend; 123 interrupt-parent = <&gic>; 124 }; 125 126 gic: interrupt-controller@48000000 { 127 compatible = "arm,gic-v3"; 128 reg = <0 0x48000000 0 0x10000>, 129 <0 0x48040000 0 0xc0000>; 130 #interrupt-cells = <3>; 131 interrupt-controller; 132 interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; 133 interrupt-parent = <&gic>; 134 }; 135 136 thermal-zones { 137 cpu-thermal { 138 polling-delay-passive = <250>; 139 polling-delay = <2000>; 140 141 thermal-sensors = <&tmu 0>; 142 143 trips { 144 cpu_alert: cpu-alert { 145 temperature = <80000>; 146 hysteresis = <2000>; 147 type = "passive"; 148 }; 149 150 cpu_crit: cpu-crit { 151 temperature = <90000>; 152 hysteresis = <2000>; 153 type = "critical"; 154 }; 155 }; 156 157 cooling-maps { 158 map0 { 159 trip = <&cpu_alert>; 160 cooling-device = 161 <&A55_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 162 <&A55_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; 163 }; 164 }; 165 }; 166 }; 167 168 cm33: remoteproc-cm33 { 169 compatible = "fsl,imx93-cm33"; 170 clocks = <&clk IMX93_CLK_CM33_GATE>; 171 status = "disabled"; 172 }; 173 174 mqs1: mqs1 { 175 compatible = "fsl,imx93-mqs"; 176 gpr = <&aonmix_ns_gpr>; 177 status = "disabled"; 178 }; 179 180 mqs2: mqs2 { 181 compatible = "fsl,imx93-mqs"; 182 gpr = <&wakeupmix_gpr>; 183 status = "disabled"; 184 }; 185 186 soc@0 { 187 compatible = "simple-bus"; 188 #address-cells = <1>; 189 #size-cells = <1>; 190 ranges = <0x0 0x0 0x0 0x80000000>, 191 <0x28000000 0x0 0x28000000 0x10000000>; 192 193 aips1: bus@44000000 { 194 compatible = "fsl,aips-bus", "simple-bus"; 195 reg = <0x44000000 0x800000>; 196 #address-cells = <1>; 197 #size-cells = <1>; 198 ranges; 199 200 edma1: dma-controller@44000000 { 201 compatible = "fsl,imx93-edma3"; 202 reg = <0x44000000 0x200000>; 203 #dma-cells = <3>; 204 dma-channels = <31>; 205 interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>, // 0: Reserved 206 <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, // 1: CANFD1 207 <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, // 2: Reserved 208 <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, // 3: GPIO1 CH0 209 <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, // 4: GPIO1 CH1 210 <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, // 5: I3C1 TO Bus 211 <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, // 6: I3C1 From Bus 212 <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, // 7: LPI2C1 M TX 213 <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, // 8: LPI2C1 S TX 214 <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, // 9: LPI2C2 M RX 215 <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, // 10: LPI2C2 S RX 216 <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, // 11: LPSPI1 TX 217 <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, // 12: LPSPI1 RX 218 <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, // 13: LPSPI2 TX 219 <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, // 14: LPSPI2 RX 220 <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, // 15: LPTMR1 221 <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>, // 16: LPUART1 TX 222 <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>, // 17: LPUART1 RX 223 <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, // 18: LPUART2 TX 224 <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, // 19: LPUART2 RX 225 <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, // 20: S400 226 <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, // 21: SAI TX 227 <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, // 22: SAI RX 228 <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, // 23: TPM1 CH0/CH2 229 <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>, // 24: TPM1 CH1/CH3 230 <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, // 25: TPM1 Overflow 231 <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, // 26: TMP2 CH0/CH2 232 <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, // 27: TMP2 CH1/CH3 233 <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, // 28: TMP2 Overflow 234 <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, // 29: PDM 235 <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>; // 30: ADC1 236 clocks = <&clk IMX93_CLK_EDMA1_GATE>; 237 clock-names = "dma"; 238 }; 239 240 aonmix_ns_gpr: syscon@44210000 { 241 compatible = "fsl,imx93-aonmix-ns-syscfg", "syscon"; 242 reg = <0x44210000 0x1000>; 243 }; 244 245 mu1: mailbox@44230000 { 246 compatible = "fsl,imx93-mu", "fsl,imx8ulp-mu"; 247 reg = <0x44230000 0x10000>; 248 interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; 249 clocks = <&clk IMX93_CLK_MU1_B_GATE>; 250 #mbox-cells = <2>; 251 status = "disabled"; 252 }; 253 254 system_counter: timer@44290000 { 255 compatible = "nxp,sysctr-timer"; 256 reg = <0x44290000 0x30000>; 257 interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; 258 clocks = <&osc_24m>; 259 clock-names = "per"; 260 nxp,no-divider; 261 }; 262 263 wdog1: watchdog@442d0000 { 264 compatible = "fsl,imx93-wdt"; 265 reg = <0x442d0000 0x10000>; 266 interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; 267 clocks = <&clk IMX93_CLK_WDOG1_GATE>; 268 timeout-sec = <40>; 269 status = "disabled"; 270 }; 271 272 wdog2: watchdog@442e0000 { 273 compatible = "fsl,imx93-wdt"; 274 reg = <0x442e0000 0x10000>; 275 interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; 276 clocks = <&clk IMX93_CLK_WDOG2_GATE>; 277 timeout-sec = <40>; 278 status = "disabled"; 279 }; 280 281 tpm1: pwm@44310000 { 282 compatible = "fsl,imx7ulp-pwm"; 283 reg = <0x44310000 0x1000>; 284 clocks = <&clk IMX93_CLK_TPM1_GATE>; 285 #pwm-cells = <3>; 286 status = "disabled"; 287 }; 288 289 tpm2: pwm@44320000 { 290 compatible = "fsl,imx7ulp-pwm"; 291 reg = <0x44320000 0x10000>; 292 clocks = <&clk IMX93_CLK_TPM2_GATE>; 293 #pwm-cells = <3>; 294 status = "disabled"; 295 }; 296 297 i3c1: i3c@44330000 { 298 compatible = "silvaco,i3c-master-v1"; 299 reg = <0x44330000 0x10000>; 300 interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; 301 #address-cells = <3>; 302 #size-cells = <0>; 303 clocks = <&clk IMX93_CLK_BUS_AON>, 304 <&clk IMX93_CLK_I3C1_GATE>, 305 <&clk IMX93_CLK_I3C1_SLOW>; 306 clock-names = "pclk", "fast_clk", "slow_clk"; 307 status = "disabled"; 308 }; 309 310 lpi2c1: i2c@44340000 { 311 compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c"; 312 reg = <0x44340000 0x10000>; 313 #address-cells = <1>; 314 #size-cells = <0>; 315 interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; 316 clocks = <&clk IMX93_CLK_LPI2C1_GATE>, 317 <&clk IMX93_CLK_BUS_AON>; 318 clock-names = "per", "ipg"; 319 status = "disabled"; 320 }; 321 322 lpi2c2: i2c@44350000 { 323 compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c"; 324 reg = <0x44350000 0x10000>; 325 #address-cells = <1>; 326 #size-cells = <0>; 327 interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; 328 clocks = <&clk IMX93_CLK_LPI2C2_GATE>, 329 <&clk IMX93_CLK_BUS_AON>; 330 clock-names = "per", "ipg"; 331 status = "disabled"; 332 }; 333 334 lpspi1: spi@44360000 { 335 #address-cells = <1>; 336 #size-cells = <0>; 337 compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi"; 338 reg = <0x44360000 0x10000>; 339 interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; 340 clocks = <&clk IMX93_CLK_LPSPI1_GATE>, 341 <&clk IMX93_CLK_BUS_AON>; 342 clock-names = "per", "ipg"; 343 status = "disabled"; 344 }; 345 346 lpspi2: spi@44370000 { 347 #address-cells = <1>; 348 #size-cells = <0>; 349 compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi"; 350 reg = <0x44370000 0x10000>; 351 interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; 352 clocks = <&clk IMX93_CLK_LPSPI2_GATE>, 353 <&clk IMX93_CLK_BUS_AON>; 354 clock-names = "per", "ipg"; 355 status = "disabled"; 356 }; 357 358 lpuart1: serial@44380000 { 359 compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart"; 360 reg = <0x44380000 0x1000>; 361 interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; 362 clocks = <&clk IMX93_CLK_LPUART1_GATE>; 363 clock-names = "ipg"; 364 dmas = <&edma1 17 0 1>, <&edma1 16 0 0>; 365 dma-names = "rx", "tx"; 366 status = "disabled"; 367 }; 368 369 lpuart2: serial@44390000 { 370 compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart"; 371 reg = <0x44390000 0x1000>; 372 interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; 373 clocks = <&clk IMX93_CLK_LPUART2_GATE>; 374 clock-names = "ipg"; 375 dmas = <&edma1 19 0 1>, <&edma1 18 0 0>; 376 dma-names = "rx", "tx"; 377 status = "disabled"; 378 }; 379 380 flexcan1: can@443a0000 { 381 compatible = "fsl,imx93-flexcan"; 382 reg = <0x443a0000 0x10000>; 383 interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; 384 clocks = <&clk IMX93_CLK_BUS_AON>, 385 <&clk IMX93_CLK_CAN1_GATE>; 386 clock-names = "ipg", "per"; 387 assigned-clocks = <&clk IMX93_CLK_CAN1>; 388 assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>; 389 assigned-clock-rates = <40000000>; 390 fsl,clk-source = /bits/ 8 <0>; 391 fsl,stop-mode = <&aonmix_ns_gpr 0x14 0>; 392 status = "disabled"; 393 }; 394 395 sai1: sai@443b0000 { 396 compatible = "fsl,imx93-sai"; 397 reg = <0x443b0000 0x10000>; 398 interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; 399 clocks = <&clk IMX93_CLK_SAI1_IPG>, <&clk IMX93_CLK_DUMMY>, 400 <&clk IMX93_CLK_SAI1_GATE>, <&clk IMX93_CLK_DUMMY>, 401 <&clk IMX93_CLK_DUMMY>; 402 clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3"; 403 dmas = <&edma1 22 0 1>, <&edma1 21 0 0>; 404 dma-names = "rx", "tx"; 405 status = "disabled"; 406 }; 407 408 iomuxc: pinctrl@443c0000 { 409 compatible = "fsl,imx93-iomuxc"; 410 reg = <0x443c0000 0x10000>; 411 status = "okay"; 412 }; 413 414 bbnsm: bbnsm@44440000 { 415 compatible = "nxp,imx93-bbnsm", "syscon", "simple-mfd"; 416 reg = <0x44440000 0x10000>; 417 418 bbnsm_rtc: rtc { 419 compatible = "nxp,imx93-bbnsm-rtc"; 420 interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; 421 }; 422 423 bbnsm_pwrkey: pwrkey { 424 compatible = "nxp,imx93-bbnsm-pwrkey"; 425 interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; 426 linux,code = <KEY_POWER>; 427 }; 428 }; 429 430 clk: clock-controller@44450000 { 431 compatible = "fsl,imx93-ccm"; 432 reg = <0x44450000 0x10000>; 433 #clock-cells = <1>; 434 clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>; 435 clock-names = "osc_32k", "osc_24m", "clk_ext1"; 436 assigned-clocks = <&clk IMX93_CLK_AUDIO_PLL>; 437 assigned-clock-rates = <393216000>; 438 status = "okay"; 439 }; 440 441 src: system-controller@44460000 { 442 compatible = "fsl,imx93-src", "syscon"; 443 reg = <0x44460000 0x10000>; 444 #address-cells = <1>; 445 #size-cells = <1>; 446 ranges; 447 448 mlmix: power-domain@44461800 { 449 compatible = "fsl,imx93-src-slice"; 450 reg = <0x44461800 0x400>, <0x44464800 0x400>; 451 #power-domain-cells = <0>; 452 clocks = <&clk IMX93_CLK_ML_APB>, 453 <&clk IMX93_CLK_ML>; 454 }; 455 456 mediamix: power-domain@44462400 { 457 compatible = "fsl,imx93-src-slice"; 458 reg = <0x44462400 0x400>, <0x44465800 0x400>; 459 #power-domain-cells = <0>; 460 clocks = <&clk IMX93_CLK_NIC_MEDIA_GATE>, 461 <&clk IMX93_CLK_MEDIA_APB>; 462 }; 463 }; 464 465 clock-controller@44480000 { 466 compatible = "fsl,imx93-anatop"; 467 reg = <0x44480000 0x2000>; 468 #clock-cells = <1>; 469 }; 470 471 tmu: tmu@44482000 { 472 compatible = "fsl,qoriq-tmu"; 473 reg = <0x44482000 0x1000>; 474 interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; 475 clocks = <&clk IMX93_CLK_TMC_GATE>; 476 little-endian; 477 fsl,tmu-range = <0x800000da 0x800000e9 478 0x80000102 0x8000012a 479 0x80000166 0x800001a7 480 0x800001b6>; 481 fsl,tmu-calibration = <0x00000000 0x0000000e 482 0x00000001 0x00000029 483 0x00000002 0x00000056 484 0x00000003 0x000000a2 485 0x00000004 0x00000116 486 0x00000005 0x00000195 487 0x00000006 0x000001b2>; 488 #thermal-sensor-cells = <1>; 489 }; 490 491 micfil: micfil@44520000 { 492 compatible = "fsl,imx93-micfil"; 493 reg = <0x44520000 0x10000>; 494 interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>, 495 <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>, 496 <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>, 497 <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>; 498 clocks = <&clk IMX93_CLK_PDM_IPG>, 499 <&clk IMX93_CLK_PDM_GATE>, 500 <&clk IMX93_CLK_AUDIO_PLL>; 501 clock-names = "ipg_clk", "ipg_clk_app", "pll8k"; 502 dmas = <&edma1 29 0 5>; 503 dma-names = "rx"; 504 status = "disabled"; 505 }; 506 507 adc1: adc@44530000 { 508 compatible = "nxp,imx93-adc"; 509 reg = <0x44530000 0x10000>; 510 interrupts = <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>, 511 <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>, 512 <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>, 513 <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>; 514 clocks = <&clk IMX93_CLK_ADC1_GATE>; 515 clock-names = "ipg"; 516 #io-channel-cells = <1>; 517 status = "disabled"; 518 }; 519 }; 520 521 aips2: bus@42000000 { 522 compatible = "fsl,aips-bus", "simple-bus"; 523 reg = <0x42000000 0x800000>; 524 #address-cells = <1>; 525 #size-cells = <1>; 526 ranges; 527 528 edma2: dma-controller@42000000 { 529 compatible = "fsl,imx93-edma4"; 530 reg = <0x42000000 0x210000>; 531 #dma-cells = <3>; 532 dma-channels = <64>; 533 interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, 534 <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, 535 <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>, 536 <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>, 537 <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, 538 <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, 539 <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, 540 <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, 541 <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>, 542 <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>, 543 <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>, 544 <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>, 545 <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>, 546 <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>, 547 <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>, 548 <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>, 549 <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, 550 <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, 551 <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, 552 <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, 553 <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>, 554 <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>, 555 <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>, 556 <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>, 557 <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>, 558 <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>, 559 <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, 560 <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, 561 <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, 562 <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, 563 <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>, 564 <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>, 565 <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, 566 <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, 567 <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, 568 <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, 569 <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, 570 <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, 571 <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, 572 <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, 573 <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, 574 <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, 575 <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, 576 <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, 577 <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, 578 <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, 579 <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>, 580 <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>, 581 <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>, 582 <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>, 583 <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>, 584 <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>, 585 <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>, 586 <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>, 587 <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>, 588 <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>, 589 <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>, 590 <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>, 591 <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>, 592 <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>, 593 <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>, 594 <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>, 595 <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>, 596 <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>; 597 clocks = <&clk IMX93_CLK_EDMA2_GATE>; 598 clock-names = "dma"; 599 }; 600 601 wakeupmix_gpr: syscon@42420000 { 602 compatible = "fsl,imx93-wakeupmix-syscfg", "syscon"; 603 reg = <0x42420000 0x1000>; 604 }; 605 606 mu2: mailbox@42440000 { 607 compatible = "fsl,imx93-mu", "fsl,imx8ulp-mu"; 608 reg = <0x42440000 0x10000>; 609 interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; 610 clocks = <&clk IMX93_CLK_MU2_B_GATE>; 611 #mbox-cells = <2>; 612 status = "disabled"; 613 }; 614 615 wdog3: watchdog@42490000 { 616 compatible = "fsl,imx93-wdt"; 617 reg = <0x42490000 0x10000>; 618 interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; 619 clocks = <&clk IMX93_CLK_WDOG3_GATE>; 620 timeout-sec = <40>; 621 status = "disabled"; 622 }; 623 624 wdog4: watchdog@424a0000 { 625 compatible = "fsl,imx93-wdt"; 626 reg = <0x424a0000 0x10000>; 627 interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; 628 clocks = <&clk IMX93_CLK_WDOG4_GATE>; 629 timeout-sec = <40>; 630 status = "disabled"; 631 }; 632 633 wdog5: watchdog@424b0000 { 634 compatible = "fsl,imx93-wdt"; 635 reg = <0x424b0000 0x10000>; 636 interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; 637 clocks = <&clk IMX93_CLK_WDOG5_GATE>; 638 timeout-sec = <40>; 639 status = "disabled"; 640 }; 641 642 tpm3: pwm@424e0000 { 643 compatible = "fsl,imx7ulp-pwm"; 644 reg = <0x424e0000 0x1000>; 645 clocks = <&clk IMX93_CLK_TPM3_GATE>; 646 #pwm-cells = <3>; 647 status = "disabled"; 648 }; 649 650 tpm4: pwm@424f0000 { 651 compatible = "fsl,imx7ulp-pwm"; 652 reg = <0x424f0000 0x10000>; 653 clocks = <&clk IMX93_CLK_TPM4_GATE>; 654 #pwm-cells = <3>; 655 status = "disabled"; 656 }; 657 658 tpm5: pwm@42500000 { 659 compatible = "fsl,imx7ulp-pwm"; 660 reg = <0x42500000 0x10000>; 661 clocks = <&clk IMX93_CLK_TPM5_GATE>; 662 #pwm-cells = <3>; 663 status = "disabled"; 664 }; 665 666 tpm6: pwm@42510000 { 667 compatible = "fsl,imx7ulp-pwm"; 668 reg = <0x42510000 0x10000>; 669 clocks = <&clk IMX93_CLK_TPM6_GATE>; 670 #pwm-cells = <3>; 671 status = "disabled"; 672 }; 673 674 i3c2: i3c@42520000 { 675 compatible = "silvaco,i3c-master-v1"; 676 reg = <0x42520000 0x10000>; 677 interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; 678 #address-cells = <3>; 679 #size-cells = <0>; 680 clocks = <&clk IMX93_CLK_BUS_WAKEUP>, 681 <&clk IMX93_CLK_I3C2_GATE>, 682 <&clk IMX93_CLK_I3C2_SLOW>; 683 clock-names = "pclk", "fast_clk", "slow_clk"; 684 status = "disabled"; 685 }; 686 687 lpi2c3: i2c@42530000 { 688 compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c"; 689 reg = <0x42530000 0x10000>; 690 #address-cells = <1>; 691 #size-cells = <0>; 692 interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; 693 clocks = <&clk IMX93_CLK_LPI2C3_GATE>, 694 <&clk IMX93_CLK_BUS_WAKEUP>; 695 clock-names = "per", "ipg"; 696 status = "disabled"; 697 }; 698 699 lpi2c4: i2c@42540000 { 700 compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c"; 701 reg = <0x42540000 0x10000>; 702 #address-cells = <1>; 703 #size-cells = <0>; 704 interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; 705 clocks = <&clk IMX93_CLK_LPI2C4_GATE>, 706 <&clk IMX93_CLK_BUS_WAKEUP>; 707 clock-names = "per", "ipg"; 708 status = "disabled"; 709 }; 710 711 lpspi3: spi@42550000 { 712 #address-cells = <1>; 713 #size-cells = <0>; 714 compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi"; 715 reg = <0x42550000 0x10000>; 716 interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; 717 clocks = <&clk IMX93_CLK_LPSPI3_GATE>, 718 <&clk IMX93_CLK_BUS_WAKEUP>; 719 clock-names = "per", "ipg"; 720 status = "disabled"; 721 }; 722 723 lpspi4: spi@42560000 { 724 #address-cells = <1>; 725 #size-cells = <0>; 726 compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi"; 727 reg = <0x42560000 0x10000>; 728 interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; 729 clocks = <&clk IMX93_CLK_LPSPI4_GATE>, 730 <&clk IMX93_CLK_BUS_WAKEUP>; 731 clock-names = "per", "ipg"; 732 status = "disabled"; 733 }; 734 735 lpuart3: serial@42570000 { 736 compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart"; 737 reg = <0x42570000 0x1000>; 738 interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; 739 clocks = <&clk IMX93_CLK_LPUART3_GATE>; 740 clock-names = "ipg"; 741 dmas = <&edma2 18 0 1>, <&edma2 17 0 0>; 742 dma-names = "rx", "tx"; 743 status = "disabled"; 744 }; 745 746 lpuart4: serial@42580000 { 747 compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart"; 748 reg = <0x42580000 0x1000>; 749 interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; 750 clocks = <&clk IMX93_CLK_LPUART4_GATE>; 751 clock-names = "ipg"; 752 dmas = <&edma2 20 0 1>, <&edma2 19 0 0>; 753 dma-names = "rx", "tx"; 754 status = "disabled"; 755 }; 756 757 lpuart5: serial@42590000 { 758 compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart"; 759 reg = <0x42590000 0x1000>; 760 interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; 761 clocks = <&clk IMX93_CLK_LPUART5_GATE>; 762 clock-names = "ipg"; 763 dmas = <&edma2 22 0 1>, <&edma2 21 0 0>; 764 dma-names = "rx", "tx"; 765 status = "disabled"; 766 }; 767 768 lpuart6: serial@425a0000 { 769 compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart"; 770 reg = <0x425a0000 0x1000>; 771 interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; 772 clocks = <&clk IMX93_CLK_LPUART6_GATE>; 773 clock-names = "ipg"; 774 dmas = <&edma2 24 0 1>, <&edma2 23 0 0>; 775 dma-names = "rx", "tx"; 776 status = "disabled"; 777 }; 778 779 flexcan2: can@425b0000 { 780 compatible = "fsl,imx93-flexcan"; 781 reg = <0x425b0000 0x10000>; 782 interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; 783 clocks = <&clk IMX93_CLK_BUS_WAKEUP>, 784 <&clk IMX93_CLK_CAN2_GATE>; 785 clock-names = "ipg", "per"; 786 assigned-clocks = <&clk IMX93_CLK_CAN2>; 787 assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>; 788 assigned-clock-rates = <40000000>; 789 fsl,clk-source = /bits/ 8 <0>; 790 fsl,stop-mode = <&wakeupmix_gpr 0x0c 2>; 791 status = "disabled"; 792 }; 793 794 flexspi1: spi@425e0000 { 795 compatible = "nxp,imx8mm-fspi"; 796 reg = <0x425e0000 0x10000>, <0x28000000 0x10000000>; 797 reg-names = "fspi_base", "fspi_mmap"; 798 #address-cells = <1>; 799 #size-cells = <0>; 800 interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; 801 clocks = <&clk IMX93_CLK_FLEXSPI1_GATE>, 802 <&clk IMX93_CLK_FLEXSPI1_GATE>; 803 clock-names = "fspi_en", "fspi"; 804 assigned-clocks = <&clk IMX93_CLK_FLEXSPI1>; 805 assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1>; 806 status = "disabled"; 807 }; 808 809 sai2: sai@42650000 { 810 compatible = "fsl,imx93-sai"; 811 reg = <0x42650000 0x10000>; 812 interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>; 813 clocks = <&clk IMX93_CLK_SAI2_IPG>, <&clk IMX93_CLK_DUMMY>, 814 <&clk IMX93_CLK_SAI2_GATE>, <&clk IMX93_CLK_DUMMY>, 815 <&clk IMX93_CLK_DUMMY>; 816 clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3"; 817 dmas = <&edma2 59 0 1>, <&edma2 58 0 0>; 818 dma-names = "rx", "tx"; 819 status = "disabled"; 820 }; 821 822 sai3: sai@42660000 { 823 compatible = "fsl,imx93-sai"; 824 reg = <0x42660000 0x10000>; 825 interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>; 826 clocks = <&clk IMX93_CLK_SAI3_IPG>, <&clk IMX93_CLK_DUMMY>, 827 <&clk IMX93_CLK_SAI3_GATE>, <&clk IMX93_CLK_DUMMY>, 828 <&clk IMX93_CLK_DUMMY>; 829 clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3"; 830 dmas = <&edma2 61 0 1>, <&edma2 60 0 0>; 831 dma-names = "rx", "tx"; 832 status = "disabled"; 833 }; 834 835 xcvr: xcvr@42680000 { 836 compatible = "fsl,imx93-xcvr"; 837 reg = <0x42680000 0x800>, 838 <0x42680800 0x400>, 839 <0x42680c00 0x080>, 840 <0x42680e00 0x080>; 841 reg-names = "ram", "regs", "rxfifo", "txfifo"; 842 interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>, 843 <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>; 844 clocks = <&clk IMX93_CLK_BUS_WAKEUP>, 845 <&clk IMX93_CLK_SPDIF_GATE>, 846 <&clk IMX93_CLK_DUMMY>, 847 <&clk IMX93_CLK_AUD_XCVR_GATE>; 848 clock-names = "ipg", "phy", "spba", "pll_ipg"; 849 dmas = <&edma2 65 0 1>, <&edma2 66 0 0>; 850 dma-names = "rx", "tx"; 851 status = "disabled"; 852 }; 853 854 lpuart7: serial@42690000 { 855 compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart"; 856 reg = <0x42690000 0x1000>; 857 interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>; 858 clocks = <&clk IMX93_CLK_LPUART7_GATE>; 859 clock-names = "ipg"; 860 dmas = <&edma2 88 0 1>, <&edma2 87 0 0>; 861 dma-names = "rx", "tx"; 862 status = "disabled"; 863 }; 864 865 lpuart8: serial@426a0000 { 866 compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart"; 867 reg = <0x426a0000 0x1000>; 868 interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>; 869 clocks = <&clk IMX93_CLK_LPUART8_GATE>; 870 clock-names = "ipg"; 871 dmas = <&edma2 90 0 1>, <&edma2 89 0 0>; 872 dma-names = "rx", "tx"; 873 status = "disabled"; 874 }; 875 876 lpi2c5: i2c@426b0000 { 877 compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c"; 878 reg = <0x426b0000 0x10000>; 879 #address-cells = <1>; 880 #size-cells = <0>; 881 interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>; 882 clocks = <&clk IMX93_CLK_LPI2C5_GATE>, 883 <&clk IMX93_CLK_BUS_WAKEUP>; 884 clock-names = "per", "ipg"; 885 status = "disabled"; 886 }; 887 888 lpi2c6: i2c@426c0000 { 889 compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c"; 890 reg = <0x426c0000 0x10000>; 891 #address-cells = <1>; 892 #size-cells = <0>; 893 interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>; 894 clocks = <&clk IMX93_CLK_LPI2C6_GATE>, 895 <&clk IMX93_CLK_BUS_WAKEUP>; 896 clock-names = "per", "ipg"; 897 status = "disabled"; 898 }; 899 900 lpi2c7: i2c@426d0000 { 901 compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c"; 902 reg = <0x426d0000 0x10000>; 903 #address-cells = <1>; 904 #size-cells = <0>; 905 interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>; 906 clocks = <&clk IMX93_CLK_LPI2C7_GATE>, 907 <&clk IMX93_CLK_BUS_WAKEUP>; 908 clock-names = "per", "ipg"; 909 status = "disabled"; 910 }; 911 912 lpi2c8: i2c@426e0000 { 913 compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c"; 914 reg = <0x426e0000 0x10000>; 915 #address-cells = <1>; 916 #size-cells = <0>; 917 interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>; 918 clocks = <&clk IMX93_CLK_LPI2C8_GATE>, 919 <&clk IMX93_CLK_BUS_WAKEUP>; 920 clock-names = "per", "ipg"; 921 status = "disabled"; 922 }; 923 924 lpspi5: spi@426f0000 { 925 #address-cells = <1>; 926 #size-cells = <0>; 927 compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi"; 928 reg = <0x426f0000 0x10000>; 929 interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>; 930 clocks = <&clk IMX93_CLK_LPSPI5_GATE>, 931 <&clk IMX93_CLK_BUS_WAKEUP>; 932 clock-names = "per", "ipg"; 933 status = "disabled"; 934 }; 935 936 lpspi6: spi@42700000 { 937 #address-cells = <1>; 938 #size-cells = <0>; 939 compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi"; 940 reg = <0x42700000 0x10000>; 941 interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>; 942 clocks = <&clk IMX93_CLK_LPSPI6_GATE>, 943 <&clk IMX93_CLK_BUS_WAKEUP>; 944 clock-names = "per", "ipg"; 945 status = "disabled"; 946 }; 947 948 lpspi7: spi@42710000 { 949 #address-cells = <1>; 950 #size-cells = <0>; 951 compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi"; 952 reg = <0x42710000 0x10000>; 953 interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>; 954 clocks = <&clk IMX93_CLK_LPSPI7_GATE>, 955 <&clk IMX93_CLK_BUS_WAKEUP>; 956 clock-names = "per", "ipg"; 957 status = "disabled"; 958 }; 959 960 lpspi8: spi@42720000 { 961 #address-cells = <1>; 962 #size-cells = <0>; 963 compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi"; 964 reg = <0x42720000 0x10000>; 965 interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>; 966 clocks = <&clk IMX93_CLK_LPSPI8_GATE>, 967 <&clk IMX93_CLK_BUS_WAKEUP>; 968 clock-names = "per", "ipg"; 969 status = "disabled"; 970 }; 971 972 }; 973 974 aips3: bus@42800000 { 975 compatible = "fsl,aips-bus", "simple-bus"; 976 reg = <0x42800000 0x800000>; 977 #address-cells = <1>; 978 #size-cells = <1>; 979 ranges; 980 981 usdhc1: mmc@42850000 { 982 compatible = "fsl,imx93-usdhc", "fsl,imx8mm-usdhc"; 983 reg = <0x42850000 0x10000>; 984 interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; 985 clocks = <&clk IMX93_CLK_BUS_WAKEUP>, 986 <&clk IMX93_CLK_WAKEUP_AXI>, 987 <&clk IMX93_CLK_USDHC1_GATE>; 988 clock-names = "ipg", "ahb", "per"; 989 bus-width = <8>; 990 fsl,tuning-start-tap = <1>; 991 fsl,tuning-step = <2>; 992 status = "disabled"; 993 }; 994 995 usdhc2: mmc@42860000 { 996 compatible = "fsl,imx93-usdhc", "fsl,imx8mm-usdhc"; 997 reg = <0x42860000 0x10000>; 998 interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; 999 clocks = <&clk IMX93_CLK_BUS_WAKEUP>, 1000 <&clk IMX93_CLK_WAKEUP_AXI>, 1001 <&clk IMX93_CLK_USDHC2_GATE>; 1002 clock-names = "ipg", "ahb", "per"; 1003 bus-width = <4>; 1004 fsl,tuning-start-tap = <1>; 1005 fsl,tuning-step = <2>; 1006 status = "disabled"; 1007 }; 1008 1009 fec: ethernet@42890000 { 1010 compatible = "fsl,imx93-fec", "fsl,imx8mq-fec", "fsl,imx6sx-fec"; 1011 reg = <0x42890000 0x10000>; 1012 interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>, 1013 <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>, 1014 <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>, 1015 <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>; 1016 clocks = <&clk IMX93_CLK_ENET1_GATE>, 1017 <&clk IMX93_CLK_ENET1_GATE>, 1018 <&clk IMX93_CLK_ENET_TIMER1>, 1019 <&clk IMX93_CLK_ENET_REF>, 1020 <&clk IMX93_CLK_ENET_REF_PHY>; 1021 clock-names = "ipg", "ahb", "ptp", 1022 "enet_clk_ref", "enet_out"; 1023 assigned-clocks = <&clk IMX93_CLK_ENET_TIMER1>, 1024 <&clk IMX93_CLK_ENET_REF>, 1025 <&clk IMX93_CLK_ENET_REF_PHY>; 1026 assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>, 1027 <&clk IMX93_CLK_SYS_PLL_PFD0_DIV2>, 1028 <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>; 1029 assigned-clock-rates = <100000000>, <250000000>, <50000000>; 1030 fsl,num-tx-queues = <3>; 1031 fsl,num-rx-queues = <3>; 1032 fsl,stop-mode = <&wakeupmix_gpr 0x0c 1>; 1033 status = "disabled"; 1034 }; 1035 1036 eqos: ethernet@428a0000 { 1037 compatible = "nxp,imx93-dwmac-eqos", "snps,dwmac-5.10a"; 1038 reg = <0x428a0000 0x10000>; 1039 interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>, 1040 <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>; 1041 interrupt-names = "macirq", "eth_wake_irq"; 1042 clocks = <&clk IMX93_CLK_ENET_QOS_GATE>, 1043 <&clk IMX93_CLK_ENET_QOS_GATE>, 1044 <&clk IMX93_CLK_ENET_TIMER2>, 1045 <&clk IMX93_CLK_ENET>, 1046 <&clk IMX93_CLK_ENET_QOS_GATE>; 1047 clock-names = "stmmaceth", "pclk", "ptp_ref", "tx", "mem"; 1048 assigned-clocks = <&clk IMX93_CLK_ENET_TIMER2>, 1049 <&clk IMX93_CLK_ENET>; 1050 assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>, 1051 <&clk IMX93_CLK_SYS_PLL_PFD0_DIV2>; 1052 assigned-clock-rates = <100000000>, <250000000>; 1053 intf_mode = <&wakeupmix_gpr 0x28>; 1054 snps,clk-csr = <0>; 1055 status = "disabled"; 1056 }; 1057 1058 usdhc3: mmc@428b0000 { 1059 compatible = "fsl,imx93-usdhc", "fsl,imx8mm-usdhc"; 1060 reg = <0x428b0000 0x10000>; 1061 interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>; 1062 clocks = <&clk IMX93_CLK_BUS_WAKEUP>, 1063 <&clk IMX93_CLK_WAKEUP_AXI>, 1064 <&clk IMX93_CLK_USDHC3_GATE>; 1065 clock-names = "ipg", "ahb", "per"; 1066 bus-width = <4>; 1067 fsl,tuning-start-tap = <1>; 1068 fsl,tuning-step = <2>; 1069 status = "disabled"; 1070 }; 1071 }; 1072 1073 gpio2: gpio@43810000 { 1074 compatible = "fsl,imx93-gpio", "fsl,imx8ulp-gpio"; 1075 reg = <0x43810000 0x1000>; 1076 gpio-controller; 1077 #gpio-cells = <2>; 1078 interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>, 1079 <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; 1080 interrupt-controller; 1081 #interrupt-cells = <2>; 1082 clocks = <&clk IMX93_CLK_GPIO2_GATE>, 1083 <&clk IMX93_CLK_GPIO2_GATE>; 1084 clock-names = "gpio", "port"; 1085 gpio-ranges = <&iomuxc 0 4 30>; 1086 }; 1087 1088 gpio3: gpio@43820000 { 1089 compatible = "fsl,imx93-gpio", "fsl,imx8ulp-gpio"; 1090 reg = <0x43820000 0x1000>; 1091 gpio-controller; 1092 #gpio-cells = <2>; 1093 interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>, 1094 <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; 1095 interrupt-controller; 1096 #interrupt-cells = <2>; 1097 clocks = <&clk IMX93_CLK_GPIO3_GATE>, 1098 <&clk IMX93_CLK_GPIO3_GATE>; 1099 clock-names = "gpio", "port"; 1100 gpio-ranges = <&iomuxc 0 84 8>, <&iomuxc 8 66 18>, 1101 <&iomuxc 26 34 2>, <&iomuxc 28 0 4>; 1102 }; 1103 1104 gpio4: gpio@43830000 { 1105 compatible = "fsl,imx93-gpio", "fsl,imx8ulp-gpio"; 1106 reg = <0x43830000 0x1000>; 1107 gpio-controller; 1108 #gpio-cells = <2>; 1109 interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>, 1110 <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; 1111 interrupt-controller; 1112 #interrupt-cells = <2>; 1113 clocks = <&clk IMX93_CLK_GPIO4_GATE>, 1114 <&clk IMX93_CLK_GPIO4_GATE>; 1115 clock-names = "gpio", "port"; 1116 gpio-ranges = <&iomuxc 0 38 28>, <&iomuxc 28 36 2>; 1117 }; 1118 1119 gpio1: gpio@47400000 { 1120 compatible = "fsl,imx93-gpio", "fsl,imx8ulp-gpio"; 1121 reg = <0x47400000 0x1000>; 1122 gpio-controller; 1123 #gpio-cells = <2>; 1124 interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, 1125 <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; 1126 interrupt-controller; 1127 #interrupt-cells = <2>; 1128 clocks = <&clk IMX93_CLK_GPIO1_GATE>, 1129 <&clk IMX93_CLK_GPIO1_GATE>; 1130 clock-names = "gpio", "port"; 1131 gpio-ranges = <&iomuxc 0 92 16>; 1132 }; 1133 1134 ocotp: efuse@47510000 { 1135 compatible = "fsl,imx93-ocotp", "syscon"; 1136 reg = <0x47510000 0x10000>; 1137 #address-cells = <1>; 1138 #size-cells = <1>; 1139 }; 1140 1141 s4muap: mailbox@47520000 { 1142 compatible = "fsl,imx93-mu-s4"; 1143 reg = <0x47520000 0x10000>; 1144 interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>, 1145 <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; 1146 interrupt-names = "tx", "rx"; 1147 #mbox-cells = <2>; 1148 }; 1149 1150 media_blk_ctrl: system-controller@4ac10000 { 1151 compatible = "fsl,imx93-media-blk-ctrl", "syscon"; 1152 reg = <0x4ac10000 0x10000>; 1153 power-domains = <&mediamix>; 1154 clocks = <&clk IMX93_CLK_MEDIA_APB>, 1155 <&clk IMX93_CLK_MEDIA_AXI>, 1156 <&clk IMX93_CLK_NIC_MEDIA_GATE>, 1157 <&clk IMX93_CLK_MEDIA_DISP_PIX>, 1158 <&clk IMX93_CLK_CAM_PIX>, 1159 <&clk IMX93_CLK_PXP_GATE>, 1160 <&clk IMX93_CLK_LCDIF_GATE>, 1161 <&clk IMX93_CLK_ISI_GATE>, 1162 <&clk IMX93_CLK_MIPI_CSI_GATE>, 1163 <&clk IMX93_CLK_MIPI_DSI_GATE>; 1164 clock-names = "apb", "axi", "nic", "disp", "cam", 1165 "pxp", "lcdif", "isi", "csi", "dsi"; 1166 #power-domain-cells = <1>; 1167 status = "disabled"; 1168 }; 1169 1170 ddr-pmu@4e300dc0 { 1171 compatible = "fsl,imx93-ddr-pmu"; 1172 reg = <0x4e300dc0 0x200>; 1173 interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; 1174 }; 1175 }; 1176}; 1177