xref: /linux/arch/arm64/boot/dts/freescale/imx8mq.dtsi (revision 223981db9bafb80f558162c148f261e2ff043dbe)
1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2/*
3 * Copyright 2017 NXP
4 * Copyright (C) 2017-2018 Pengutronix, Lucas Stach <kernel@pengutronix.de>
5 */
6
7#include <dt-bindings/clock/imx8mq-clock.h>
8#include <dt-bindings/power/imx8mq-power.h>
9#include <dt-bindings/reset/imx8mq-reset.h>
10#include <dt-bindings/gpio/gpio.h>
11#include "dt-bindings/input/input.h"
12#include <dt-bindings/interrupt-controller/arm-gic.h>
13#include <dt-bindings/thermal/thermal.h>
14#include <dt-bindings/interconnect/imx8mq.h>
15#include "imx8mq-pinfunc.h"
16
17/ {
18	interrupt-parent = <&gpc>;
19
20	#address-cells = <2>;
21	#size-cells = <2>;
22
23	aliases {
24		ethernet0 = &fec1;
25		gpio0 = &gpio1;
26		gpio1 = &gpio2;
27		gpio2 = &gpio3;
28		gpio3 = &gpio4;
29		gpio4 = &gpio5;
30		i2c0 = &i2c1;
31		i2c1 = &i2c2;
32		i2c2 = &i2c3;
33		i2c3 = &i2c4;
34		mmc0 = &usdhc1;
35		mmc1 = &usdhc2;
36		serial0 = &uart1;
37		serial1 = &uart2;
38		serial2 = &uart3;
39		serial3 = &uart4;
40		spi0 = &ecspi1;
41		spi1 = &ecspi2;
42		spi2 = &ecspi3;
43	};
44
45	ckil: clock-ckil {
46		compatible = "fixed-clock";
47		#clock-cells = <0>;
48		clock-frequency = <32768>;
49		clock-output-names = "ckil";
50	};
51
52	osc_25m: clock-osc-25m {
53		compatible = "fixed-clock";
54		#clock-cells = <0>;
55		clock-frequency = <25000000>;
56		clock-output-names = "osc_25m";
57	};
58
59	osc_27m: clock-osc-27m {
60		compatible = "fixed-clock";
61		#clock-cells = <0>;
62		clock-frequency = <27000000>;
63		clock-output-names = "osc_27m";
64	};
65
66	hdmi_phy_27m: clock-hdmi-phy-27m {
67		compatible = "fixed-clock";
68		#clock-cells = <0>;
69		clock-frequency = <27000000>;
70		clock-output-names = "hdmi_phy_27m";
71	};
72
73	clk_ext1: clock-ext1 {
74		compatible = "fixed-clock";
75		#clock-cells = <0>;
76		clock-frequency = <133000000>;
77		clock-output-names = "clk_ext1";
78	};
79
80	clk_ext2: clock-ext2 {
81		compatible = "fixed-clock";
82		#clock-cells = <0>;
83		clock-frequency = <133000000>;
84		clock-output-names = "clk_ext2";
85	};
86
87	clk_ext3: clock-ext3 {
88		compatible = "fixed-clock";
89		#clock-cells = <0>;
90		clock-frequency = <133000000>;
91		clock-output-names = "clk_ext3";
92	};
93
94	clk_ext4: clock-ext4 {
95		compatible = "fixed-clock";
96		#clock-cells = <0>;
97		clock-frequency = <133000000>;
98		clock-output-names = "clk_ext4";
99	};
100
101	cpus {
102		#address-cells = <1>;
103		#size-cells = <0>;
104
105		A53_0: cpu@0 {
106			device_type = "cpu";
107			compatible = "arm,cortex-a53";
108			reg = <0x0>;
109			clock-latency = <61036>; /* two CLK32 periods */
110			clocks = <&clk IMX8MQ_CLK_ARM>;
111			enable-method = "psci";
112			i-cache-size = <0x8000>;
113			i-cache-line-size = <64>;
114			i-cache-sets = <256>;
115			d-cache-size = <0x8000>;
116			d-cache-line-size = <64>;
117			d-cache-sets = <128>;
118			next-level-cache = <&A53_L2>;
119			operating-points-v2 = <&a53_opp_table>;
120			#cooling-cells = <2>;
121			nvmem-cells = <&cpu_speed_grade>;
122			nvmem-cell-names = "speed_grade";
123		};
124
125		A53_1: cpu@1 {
126			device_type = "cpu";
127			compatible = "arm,cortex-a53";
128			reg = <0x1>;
129			clock-latency = <61036>; /* two CLK32 periods */
130			clocks = <&clk IMX8MQ_CLK_ARM>;
131			enable-method = "psci";
132			i-cache-size = <0x8000>;
133			i-cache-line-size = <64>;
134			i-cache-sets = <256>;
135			d-cache-size = <0x8000>;
136			d-cache-line-size = <64>;
137			d-cache-sets = <128>;
138			next-level-cache = <&A53_L2>;
139			operating-points-v2 = <&a53_opp_table>;
140			#cooling-cells = <2>;
141		};
142
143		A53_2: cpu@2 {
144			device_type = "cpu";
145			compatible = "arm,cortex-a53";
146			reg = <0x2>;
147			clock-latency = <61036>; /* two CLK32 periods */
148			clocks = <&clk IMX8MQ_CLK_ARM>;
149			enable-method = "psci";
150			i-cache-size = <0x8000>;
151			i-cache-line-size = <64>;
152			i-cache-sets = <256>;
153			d-cache-size = <0x8000>;
154			d-cache-line-size = <64>;
155			d-cache-sets = <128>;
156			next-level-cache = <&A53_L2>;
157			operating-points-v2 = <&a53_opp_table>;
158			#cooling-cells = <2>;
159		};
160
161		A53_3: cpu@3 {
162			device_type = "cpu";
163			compatible = "arm,cortex-a53";
164			reg = <0x3>;
165			clock-latency = <61036>; /* two CLK32 periods */
166			clocks = <&clk IMX8MQ_CLK_ARM>;
167			enable-method = "psci";
168			i-cache-size = <0x8000>;
169			i-cache-line-size = <64>;
170			i-cache-sets = <256>;
171			d-cache-size = <0x8000>;
172			d-cache-line-size = <64>;
173			d-cache-sets = <128>;
174			next-level-cache = <&A53_L2>;
175			operating-points-v2 = <&a53_opp_table>;
176			#cooling-cells = <2>;
177		};
178
179		A53_L2: l2-cache0 {
180			compatible = "cache";
181			cache-level = <2>;
182			cache-unified;
183			cache-size = <0x100000>;
184			cache-line-size = <64>;
185			cache-sets = <1024>;
186		};
187	};
188
189	a53_opp_table: opp-table {
190		compatible = "operating-points-v2";
191		opp-shared;
192
193		opp-800000000 {
194			opp-hz = /bits/ 64 <800000000>;
195			opp-microvolt = <900000>;
196			/* Industrial only */
197			opp-supported-hw = <0xf>, <0x4>;
198			clock-latency-ns = <150000>;
199			opp-suspend;
200		};
201
202		opp-1000000000 {
203			opp-hz = /bits/ 64 <1000000000>;
204			opp-microvolt = <900000>;
205			/* Consumer only */
206			opp-supported-hw = <0xe>, <0x3>;
207			clock-latency-ns = <150000>;
208			opp-suspend;
209		};
210
211		opp-1300000000 {
212			opp-hz = /bits/ 64 <1300000000>;
213			opp-microvolt = <1000000>;
214			opp-supported-hw = <0xc>, <0x4>;
215			clock-latency-ns = <150000>;
216			opp-suspend;
217		};
218
219		opp-1500000000 {
220			opp-hz = /bits/ 64 <1500000000>;
221			opp-microvolt = <1000000>;
222			opp-supported-hw = <0x8>, <0x3>;
223			clock-latency-ns = <150000>;
224			opp-suspend;
225		};
226	};
227
228	funnel {
229		/*
230		 * non-configurable funnel don't show up on the AMBA
231		 * bus.  As such no need to add "arm,primecell".
232		 */
233		compatible = "arm,coresight-static-funnel";
234
235		in-ports {
236			#address-cells = <1>;
237			#size-cells = <0>;
238
239			port@0 {
240				reg = <0>;
241
242				ca_funnel_in_port0: endpoint {
243					remote-endpoint = <&etm0_out_port>;
244				};
245			};
246
247			port@1 {
248				reg = <1>;
249
250				ca_funnel_in_port1: endpoint {
251					remote-endpoint = <&etm1_out_port>;
252				};
253			};
254
255			port@2 {
256				reg = <2>;
257
258				ca_funnel_in_port2: endpoint {
259					remote-endpoint = <&etm2_out_port>;
260				};
261			};
262
263			port@3 {
264				reg = <3>;
265
266				ca_funnel_in_port3: endpoint {
267					remote-endpoint = <&etm3_out_port>;
268				};
269			};
270		};
271
272		out-ports {
273			port {
274				ca_funnel_out_port0: endpoint {
275					remote-endpoint = <&hugo_funnel_in_port0>;
276				};
277			};
278		};
279	};
280
281	pmu {
282		compatible = "arm,cortex-a53-pmu";
283		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
284		interrupt-parent = <&gic>;
285	};
286
287	psci {
288		compatible = "arm,psci-1.0";
289		method = "smc";
290	};
291
292	thermal-zones {
293		cpu_thermal: cpu-thermal {
294			polling-delay-passive = <250>;
295			polling-delay = <2000>;
296			thermal-sensors = <&tmu 0>;
297
298			trips {
299				cpu_alert: cpu-alert {
300					temperature = <80000>;
301					hysteresis = <2000>;
302					type = "passive";
303				};
304
305				cpu-crit {
306					temperature = <90000>;
307					hysteresis = <2000>;
308					type = "critical";
309				};
310			};
311
312			cooling-maps {
313				map0 {
314					trip = <&cpu_alert>;
315					cooling-device =
316						<&A53_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
317						<&A53_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
318						<&A53_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
319						<&A53_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
320				};
321			};
322		};
323
324		gpu-thermal {
325			polling-delay-passive = <250>;
326			polling-delay = <2000>;
327			thermal-sensors = <&tmu 1>;
328
329			trips {
330				gpu_alert: gpu-alert {
331					temperature = <80000>;
332					hysteresis = <2000>;
333					type = "passive";
334				};
335
336				gpu-crit {
337					temperature = <90000>;
338					hysteresis = <2000>;
339					type = "critical";
340				};
341			};
342
343			cooling-maps {
344				map0 {
345					trip = <&gpu_alert>;
346					cooling-device =
347						<&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
348				};
349			};
350		};
351
352		vpu-thermal {
353			polling-delay-passive = <250>;
354			polling-delay = <2000>;
355			thermal-sensors = <&tmu 2>;
356
357			trips {
358				vpu-crit {
359					temperature = <90000>;
360					hysteresis = <2000>;
361					type = "critical";
362				};
363			};
364		};
365	};
366
367	timer {
368		compatible = "arm,armv8-timer";
369		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* Physical Secure */
370		             <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* Physical Non-Secure */
371		             <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* Virtual */
372		             <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* Hypervisor */
373		interrupt-parent = <&gic>;
374		arm,no-tick-in-suspend;
375	};
376
377	soc: soc@0 {
378		compatible = "fsl,imx8mq-soc", "simple-bus";
379		#address-cells = <1>;
380		#size-cells = <1>;
381		ranges = <0x0 0x0 0x0 0x3e000000>;
382		dma-ranges = <0x40000000 0x0 0x40000000 0xc0000000>;
383		nvmem-cells = <&imx8mq_uid>;
384		nvmem-cell-names = "soc_unique_id";
385
386		etm0: etm@28440000 {
387			compatible = "arm,coresight-etm4x", "arm,primecell";
388			reg = <0x28440000 0x1000>;
389			cpu = <&A53_0>;
390			clocks = <&clk IMX8MQ_CLK_MAIN_AXI>;
391			clock-names = "apb_pclk";
392
393			out-ports {
394				port {
395					etm0_out_port: endpoint {
396						remote-endpoint = <&ca_funnel_in_port0>;
397					};
398				};
399			};
400		};
401
402		etm1: etm@28540000 {
403			compatible = "arm,coresight-etm4x", "arm,primecell";
404			reg = <0x28540000 0x1000>;
405			cpu = <&A53_1>;
406			clocks = <&clk IMX8MQ_CLK_MAIN_AXI>;
407			clock-names = "apb_pclk";
408
409			out-ports {
410				port {
411					etm1_out_port: endpoint {
412						remote-endpoint = <&ca_funnel_in_port1>;
413					};
414				};
415			};
416		};
417
418		etm2: etm@28640000 {
419			compatible = "arm,coresight-etm4x", "arm,primecell";
420			reg = <0x28640000 0x1000>;
421			cpu = <&A53_2>;
422			clocks = <&clk IMX8MQ_CLK_MAIN_AXI>;
423			clock-names = "apb_pclk";
424
425			out-ports {
426				port {
427					etm2_out_port: endpoint {
428						remote-endpoint = <&ca_funnel_in_port2>;
429					};
430				};
431			};
432		};
433
434		etm3: etm@28740000 {
435			compatible = "arm,coresight-etm4x", "arm,primecell";
436			reg = <0x28740000 0x1000>;
437			cpu = <&A53_3>;
438			clocks = <&clk IMX8MQ_CLK_MAIN_AXI>;
439			clock-names = "apb_pclk";
440
441			out-ports {
442				port {
443					etm3_out_port: endpoint {
444						remote-endpoint = <&ca_funnel_in_port3>;
445					};
446				};
447			};
448		};
449
450		funnel@28c03000 {
451			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
452			reg = <0x28c03000 0x1000>;
453			clocks = <&clk IMX8MQ_CLK_MAIN_AXI>;
454			clock-names = "apb_pclk";
455
456			in-ports {
457				#address-cells = <1>;
458				#size-cells = <0>;
459
460				port@0 {
461					reg = <0>;
462
463					hugo_funnel_in_port0: endpoint {
464						remote-endpoint = <&ca_funnel_out_port0>;
465					};
466				};
467
468				port@1 {
469					reg = <1>;
470
471					hugo_funnel_in_port1: endpoint {
472					/* M4 input */
473					};
474				};
475				/* the other input ports are not connect to anything */
476			};
477
478			out-ports {
479				port {
480					hugo_funnel_out_port0: endpoint {
481						remote-endpoint = <&etf_in_port>;
482					};
483				};
484			};
485		};
486
487		etf@28c04000 {
488			compatible = "arm,coresight-tmc", "arm,primecell";
489			reg = <0x28c04000 0x1000>;
490			clocks = <&clk IMX8MQ_CLK_MAIN_AXI>;
491			clock-names = "apb_pclk";
492
493			in-ports {
494				port {
495					etf_in_port: endpoint {
496						remote-endpoint = <&hugo_funnel_out_port0>;
497					};
498				};
499			};
500
501			out-ports {
502				port {
503					etf_out_port: endpoint {
504						remote-endpoint = <&etr_in_port>;
505					};
506				};
507			};
508		};
509
510		etr@28c06000 {
511			compatible = "arm,coresight-tmc", "arm,primecell";
512			reg = <0x28c06000 0x1000>;
513			clocks = <&clk IMX8MQ_CLK_MAIN_AXI>;
514			clock-names = "apb_pclk";
515
516			in-ports {
517				port {
518					etr_in_port: endpoint {
519						remote-endpoint = <&etf_out_port>;
520					};
521				};
522			};
523		};
524
525		aips1: bus@30000000 { /* AIPS1 */
526			compatible = "fsl,aips-bus", "simple-bus";
527			reg = <0x30000000 0x400000>;
528			#address-cells = <1>;
529			#size-cells = <1>;
530			ranges = <0x30000000 0x30000000 0x400000>;
531
532			sai1: sai@30010000 {
533				#sound-dai-cells = <0>;
534				compatible = "fsl,imx8mq-sai";
535				reg = <0x30010000 0x10000>;
536				interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
537				clocks = <&clk IMX8MQ_CLK_SAI1_IPG>,
538				         <&clk IMX8MQ_CLK_SAI1_ROOT>,
539				         <&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_CLK_DUMMY>;
540				clock-names = "bus", "mclk1", "mclk2", "mclk3";
541				dmas = <&sdma2 8 24 0>, <&sdma1 9 24 0>;
542				dma-names = "rx", "tx";
543				status = "disabled";
544			};
545
546			sai6: sai@30030000 {
547				#sound-dai-cells = <0>;
548				compatible = "fsl,imx8mq-sai";
549				reg = <0x30030000 0x10000>;
550				interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
551				clocks = <&clk IMX8MQ_CLK_SAI6_IPG>,
552				         <&clk IMX8MQ_CLK_SAI6_ROOT>,
553				         <&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_CLK_DUMMY>;
554				clock-names = "bus", "mclk1", "mclk2", "mclk3";
555				dmas = <&sdma2 4 24 0>, <&sdma2 5 24 0>;
556				dma-names = "rx", "tx";
557				status = "disabled";
558			};
559
560			sai5: sai@30040000 {
561				#sound-dai-cells = <0>;
562				compatible = "fsl,imx8mq-sai";
563				reg = <0x30040000 0x10000>;
564				interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
565				clocks = <&clk IMX8MQ_CLK_SAI5_IPG>,
566				         <&clk IMX8MQ_CLK_SAI5_ROOT>,
567				         <&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_CLK_DUMMY>;
568				clock-names = "bus", "mclk1", "mclk2", "mclk3";
569				dmas = <&sdma2 2 24 0>, <&sdma2 3 24 0>;
570				dma-names = "rx", "tx";
571				status = "disabled";
572			};
573
574			sai4: sai@30050000 {
575				#sound-dai-cells = <0>;
576				compatible = "fsl,imx8mq-sai";
577				reg = <0x30050000 0x10000>;
578				interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
579				clocks = <&clk IMX8MQ_CLK_SAI4_IPG>,
580				         <&clk IMX8MQ_CLK_SAI4_ROOT>,
581				         <&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_CLK_DUMMY>;
582				clock-names = "bus", "mclk1", "mclk2", "mclk3";
583				dmas = <&sdma2 0 24 0>, <&sdma2 1 24 0>;
584				dma-names = "rx", "tx";
585				status = "disabled";
586			};
587
588			gpio1: gpio@30200000 {
589				compatible = "fsl,imx8mq-gpio", "fsl,imx35-gpio";
590				reg = <0x30200000 0x10000>;
591				interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
592				             <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
593				clocks = <&clk IMX8MQ_CLK_GPIO1_ROOT>;
594				gpio-controller;
595				#gpio-cells = <2>;
596				interrupt-controller;
597				#interrupt-cells = <2>;
598				gpio-ranges = <&iomuxc 0 10 30>;
599			};
600
601			gpio2: gpio@30210000 {
602				compatible = "fsl,imx8mq-gpio", "fsl,imx35-gpio";
603				reg = <0x30210000 0x10000>;
604				interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
605				             <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
606				clocks = <&clk IMX8MQ_CLK_GPIO2_ROOT>;
607				gpio-controller;
608				#gpio-cells = <2>;
609				interrupt-controller;
610				#interrupt-cells = <2>;
611				gpio-ranges = <&iomuxc 0 40 21>;
612			};
613
614			gpio3: gpio@30220000 {
615				compatible = "fsl,imx8mq-gpio", "fsl,imx35-gpio";
616				reg = <0x30220000 0x10000>;
617				interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
618				             <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
619				clocks = <&clk IMX8MQ_CLK_GPIO3_ROOT>;
620				gpio-controller;
621				#gpio-cells = <2>;
622				interrupt-controller;
623				#interrupt-cells = <2>;
624				gpio-ranges = <&iomuxc 0 61 26>;
625			};
626
627			gpio4: gpio@30230000 {
628				compatible = "fsl,imx8mq-gpio", "fsl,imx35-gpio";
629				reg = <0x30230000 0x10000>;
630				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
631				             <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
632				clocks = <&clk IMX8MQ_CLK_GPIO4_ROOT>;
633				gpio-controller;
634				#gpio-cells = <2>;
635				interrupt-controller;
636				#interrupt-cells = <2>;
637				gpio-ranges = <&iomuxc 0 87 32>;
638			};
639
640			gpio5: gpio@30240000 {
641				compatible = "fsl,imx8mq-gpio", "fsl,imx35-gpio";
642				reg = <0x30240000 0x10000>;
643				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
644				             <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
645				clocks = <&clk IMX8MQ_CLK_GPIO5_ROOT>;
646				gpio-controller;
647				#gpio-cells = <2>;
648				interrupt-controller;
649				#interrupt-cells = <2>;
650				gpio-ranges = <&iomuxc 0 119 30>;
651			};
652
653			tmu: tmu@30260000 {
654				compatible = "fsl,imx8mq-tmu";
655				reg = <0x30260000 0x10000>;
656				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
657				clocks = <&clk IMX8MQ_CLK_TMU_ROOT>;
658				little-endian;
659				fsl,tmu-range = <0xb0000 0xa0026 0x80048 0x70061>;
660				fsl,tmu-calibration = <0x00000000 0x00000023>,
661						      <0x00000001 0x00000029>,
662						      <0x00000002 0x0000002f>,
663						      <0x00000003 0x00000035>,
664						      <0x00000004 0x0000003d>,
665						      <0x00000005 0x00000043>,
666						      <0x00000006 0x0000004b>,
667						      <0x00000007 0x00000051>,
668						      <0x00000008 0x00000057>,
669						      <0x00000009 0x0000005f>,
670						      <0x0000000a 0x00000067>,
671						      <0x0000000b 0x0000006f>,
672
673						      <0x00010000 0x0000001b>,
674						      <0x00010001 0x00000023>,
675						      <0x00010002 0x0000002b>,
676						      <0x00010003 0x00000033>,
677						      <0x00010004 0x0000003b>,
678						      <0x00010005 0x00000043>,
679						      <0x00010006 0x0000004b>,
680						      <0x00010007 0x00000055>,
681						      <0x00010008 0x0000005d>,
682						      <0x00010009 0x00000067>,
683						      <0x0001000a 0x00000070>,
684
685						      <0x00020000 0x00000017>,
686						      <0x00020001 0x00000023>,
687						      <0x00020002 0x0000002d>,
688						      <0x00020003 0x00000037>,
689						      <0x00020004 0x00000041>,
690						      <0x00020005 0x0000004b>,
691						      <0x00020006 0x00000057>,
692						      <0x00020007 0x00000063>,
693						      <0x00020008 0x0000006f>,
694
695						      <0x00030000 0x00000015>,
696						      <0x00030001 0x00000021>,
697						      <0x00030002 0x0000002d>,
698						      <0x00030003 0x00000039>,
699						      <0x00030004 0x00000045>,
700						      <0x00030005 0x00000053>,
701						      <0x00030006 0x0000005f>,
702						      <0x00030007 0x00000071>;
703				#thermal-sensor-cells = <1>;
704			};
705
706			wdog1: watchdog@30280000 {
707				compatible = "fsl,imx8mq-wdt", "fsl,imx21-wdt";
708				reg = <0x30280000 0x10000>;
709				interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
710				clocks = <&clk IMX8MQ_CLK_WDOG1_ROOT>;
711				status = "disabled";
712			};
713
714			wdog2: watchdog@30290000 {
715				compatible = "fsl,imx8mq-wdt", "fsl,imx21-wdt";
716				reg = <0x30290000 0x10000>;
717				interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
718				clocks = <&clk IMX8MQ_CLK_WDOG2_ROOT>;
719				status = "disabled";
720			};
721
722			wdog3: watchdog@302a0000 {
723				compatible = "fsl,imx8mq-wdt", "fsl,imx21-wdt";
724				reg = <0x302a0000 0x10000>;
725				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
726				clocks = <&clk IMX8MQ_CLK_WDOG3_ROOT>;
727				status = "disabled";
728			};
729
730			sdma2: dma-controller@302c0000 {
731				compatible = "fsl,imx8mq-sdma","fsl,imx7d-sdma";
732				reg = <0x302c0000 0x10000>;
733				interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
734				clocks = <&clk IMX8MQ_CLK_SDMA2_ROOT>,
735					 <&clk IMX8MQ_CLK_SDMA2_ROOT>;
736				clock-names = "ipg", "ahb";
737				#dma-cells = <3>;
738				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
739			};
740
741			lcdif: lcd-controller@30320000 {
742				compatible = "fsl,imx8mq-lcdif", "fsl,imx6sx-lcdif";
743				reg = <0x30320000 0x10000>;
744				interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
745				clocks = <&clk IMX8MQ_CLK_LCDIF_PIXEL>,
746					 <&clk IMX8MQ_CLK_DISP_APB_ROOT>,
747					 <&clk IMX8MQ_CLK_DISP_AXI_ROOT>;
748				clock-names = "pix", "axi", "disp_axi";
749				assigned-clocks = <&clk IMX8MQ_VIDEO_PLL1_REF_SEL>,
750						  <&clk IMX8MQ_VIDEO_PLL1_BYPASS>,
751						  <&clk IMX8MQ_CLK_LCDIF_PIXEL>,
752						  <&clk IMX8MQ_VIDEO_PLL1>;
753				assigned-clock-parents = <&clk IMX8MQ_CLK_25M>,
754						  <&clk IMX8MQ_VIDEO_PLL1>,
755						  <&clk IMX8MQ_VIDEO_PLL1_OUT>;
756				assigned-clock-rates = <0>, <0>, <0>, <594000000>;
757				status = "disabled";
758
759				port {
760					lcdif_mipi_dsi: endpoint {
761						remote-endpoint = <&mipi_dsi_lcdif_in>;
762					};
763				};
764			};
765
766			iomuxc: pinctrl@30330000 {
767				compatible = "fsl,imx8mq-iomuxc";
768				reg = <0x30330000 0x10000>;
769			};
770
771			iomuxc_gpr: syscon@30340000 {
772				compatible = "fsl,imx8mq-iomuxc-gpr", "syscon", "simple-mfd";
773				reg = <0x30340000 0x10000>;
774
775				mux: mux-controller {
776					compatible = "mmio-mux";
777					#mux-control-cells = <1>;
778					mux-reg-masks = <0x34 0x00000004>; /* MIPI_MUX_SEL */
779				};
780			};
781
782			ocotp: efuse@30350000 {
783				compatible = "fsl,imx8mq-ocotp", "syscon";
784				reg = <0x30350000 0x10000>;
785				clocks = <&clk IMX8MQ_CLK_OCOTP_ROOT>;
786				#address-cells = <1>;
787				#size-cells = <1>;
788
789				/*
790				 * The register address below maps to the MX8M
791				 * Fusemap Description Table entries this way.
792				 * Assuming
793				 *   reg = <ADDR SIZE>;
794				 * then
795				 *   Fuse Address = (ADDR * 4) + 0x400
796				 * Note that if SIZE is greater than 4, then
797				 * each subsequent fuse is located at offset
798				 * +0x10 in Fusemap Description Table (e.g.
799				 * reg = <0x4 0x8> describes fuses 0x410 and
800				 * 0x420).
801				 */
802				imx8mq_uid: soc-uid@4 { /* 0x410-0x420 */
803					reg = <0x4 0x8>;
804				};
805
806				cpu_speed_grade: speed-grade@10 { /* 0x440 */
807					reg = <0x10 4>;
808				};
809
810				fec_mac_address: mac-address@90 { /* 0x640 */
811					reg = <0x90 6>;
812				};
813			};
814
815			anatop: clock-controller@30360000 {
816				compatible = "fsl,imx8mq-anatop";
817				reg = <0x30360000 0x10000>;
818				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
819				#clock-cells = <1>;
820			};
821
822			snvs: snvs@30370000 {
823				compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
824				reg = <0x30370000 0x10000>;
825
826				snvs_rtc: snvs-rtc-lp {
827					compatible = "fsl,sec-v4.0-mon-rtc-lp";
828					regmap = <&snvs>;
829					offset = <0x34>;
830					interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
831						<GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
832					clocks = <&clk IMX8MQ_CLK_SNVS_ROOT>;
833					clock-names = "snvs-rtc";
834				};
835
836				snvs_pwrkey: snvs-powerkey {
837					compatible = "fsl,sec-v4.0-pwrkey";
838					regmap = <&snvs>;
839					interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
840					clocks = <&clk IMX8MQ_CLK_SNVS_ROOT>;
841					clock-names = "snvs-pwrkey";
842					linux,keycode = <KEY_POWER>;
843					wakeup-source;
844					status = "disabled";
845				};
846			};
847
848			clk: clock-controller@30380000 {
849				compatible = "fsl,imx8mq-ccm";
850				reg = <0x30380000 0x10000>;
851				interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
852				             <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
853				#clock-cells = <1>;
854				clocks = <&ckil>, <&osc_25m>, <&osc_27m>,
855				         <&clk_ext1>, <&clk_ext2>,
856				         <&clk_ext3>, <&clk_ext4>;
857				clock-names = "ckil", "osc_25m", "osc_27m",
858				              "clk_ext1", "clk_ext2",
859				              "clk_ext3", "clk_ext4";
860				assigned-clocks = <&clk IMX8MQ_CLK_A53_SRC>,
861						  <&clk IMX8MQ_CLK_A53_CORE>,
862						  <&clk IMX8MQ_CLK_NOC>,
863						  <&clk IMX8MQ_CLK_AUDIO_AHB>,
864						  <&clk IMX8MQ_AUDIO_PLL1_BYPASS>,
865						  <&clk IMX8MQ_AUDIO_PLL2_BYPASS>,
866						  <&clk IMX8MQ_AUDIO_PLL1>,
867						  <&clk IMX8MQ_AUDIO_PLL2>;
868				assigned-clock-rates = <0>, <0>,
869						       <800000000>,
870						       <0>,
871						       <0>,
872						       <0>,
873						       <786432000>,
874						       <722534400>;
875				assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_800M>,
876							 <&clk IMX8MQ_ARM_PLL_OUT>,
877							 <0>,
878							 <&clk IMX8MQ_SYS2_PLL_500M>,
879							 <&clk IMX8MQ_AUDIO_PLL1>,
880							 <&clk IMX8MQ_AUDIO_PLL2>;
881			};
882
883			src: reset-controller@30390000 {
884				compatible = "fsl,imx8mq-src", "syscon";
885				reg = <0x30390000 0x10000>;
886				interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
887				#reset-cells = <1>;
888			};
889
890			gpc: gpc@303a0000 {
891				compatible = "fsl,imx8mq-gpc";
892				reg = <0x303a0000 0x10000>;
893				interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
894				interrupt-parent = <&gic>;
895				interrupt-controller;
896				#interrupt-cells = <3>;
897
898				pgc {
899					#address-cells = <1>;
900					#size-cells = <0>;
901
902					pgc_mipi: power-domain@0 {
903						#power-domain-cells = <0>;
904						reg = <IMX8M_POWER_DOMAIN_MIPI>;
905					};
906
907					/*
908					 * As per comment in ATF source code:
909					 *
910					 * PCIE1 and PCIE2 share the
911					 * same reset signal, if we
912					 * power down PCIE2, PCIE1
913					 * will be held in reset too.
914					 *
915					 * So instead of creating two
916					 * separate power domains for
917					 * PCIE1 and PCIE2 we create a
918					 * link between both and use
919					 * it as a shared PCIE power
920					 * domain.
921					 */
922					pgc_pcie: power-domain@1 {
923						#power-domain-cells = <0>;
924						reg = <IMX8M_POWER_DOMAIN_PCIE1>;
925						power-domains = <&pgc_pcie2>;
926					};
927
928					pgc_otg1: power-domain@2 {
929						#power-domain-cells = <0>;
930						reg = <IMX8M_POWER_DOMAIN_USB_OTG1>;
931					};
932
933					pgc_otg2: power-domain@3 {
934						#power-domain-cells = <0>;
935						reg = <IMX8M_POWER_DOMAIN_USB_OTG2>;
936					};
937
938					pgc_ddr1: power-domain@4 {
939						#power-domain-cells = <0>;
940						reg = <IMX8M_POWER_DOMAIN_DDR1>;
941					};
942
943					pgc_gpu: power-domain@5 {
944						#power-domain-cells = <0>;
945						reg = <IMX8M_POWER_DOMAIN_GPU>;
946						clocks = <&clk IMX8MQ_CLK_GPU_ROOT>,
947						         <&clk IMX8MQ_CLK_GPU_SHADER_DIV>,
948							 <&clk IMX8MQ_CLK_GPU_AXI>,
949						         <&clk IMX8MQ_CLK_GPU_AHB>;
950					};
951
952					pgc_vpu: power-domain@6 {
953						#power-domain-cells = <0>;
954						reg = <IMX8M_POWER_DOMAIN_VPU>;
955						clocks = <&clk IMX8MQ_CLK_VPU_DEC_ROOT>,
956							 <&clk IMX8MQ_CLK_VPU_G1_ROOT>,
957							 <&clk IMX8MQ_CLK_VPU_G2_ROOT>;
958						assigned-clocks = <&clk IMX8MQ_CLK_VPU_G1>,
959								  <&clk IMX8MQ_CLK_VPU_G2>,
960								  <&clk IMX8MQ_CLK_VPU_BUS>,
961								  <&clk IMX8MQ_VPU_PLL_BYPASS>;
962						assigned-clock-parents = <&clk IMX8MQ_VPU_PLL_OUT>,
963									 <&clk IMX8MQ_VPU_PLL_OUT>,
964									 <&clk IMX8MQ_SYS1_PLL_800M>,
965									 <&clk IMX8MQ_VPU_PLL>;
966						assigned-clock-rates = <600000000>,
967								       <300000000>,
968								       <800000000>,
969								       <0>;
970					};
971
972					pgc_disp: power-domain@7 {
973						#power-domain-cells = <0>;
974						reg = <IMX8M_POWER_DOMAIN_DISP>;
975					};
976
977					pgc_mipi_csi1: power-domain@8 {
978						#power-domain-cells = <0>;
979						reg = <IMX8M_POWER_DOMAIN_MIPI_CSI1>;
980					};
981
982					pgc_mipi_csi2: power-domain@9 {
983						#power-domain-cells = <0>;
984						reg = <IMX8M_POWER_DOMAIN_MIPI_CSI2>;
985					};
986
987					pgc_pcie2: power-domain@a {
988						#power-domain-cells = <0>;
989						reg = <IMX8M_POWER_DOMAIN_PCIE2>;
990					};
991				};
992			};
993		};
994
995		aips2: bus@30400000 { /* AIPS2 */
996			compatible = "fsl,aips-bus", "simple-bus";
997			reg = <0x30400000 0x400000>;
998			#address-cells = <1>;
999			#size-cells = <1>;
1000			ranges = <0x30400000 0x30400000 0x400000>;
1001
1002			pwm1: pwm@30660000 {
1003				compatible = "fsl,imx8mq-pwm", "fsl,imx27-pwm";
1004				reg = <0x30660000 0x10000>;
1005				interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
1006				clocks = <&clk IMX8MQ_CLK_PWM1_ROOT>,
1007				         <&clk IMX8MQ_CLK_PWM1_ROOT>;
1008				clock-names = "ipg", "per";
1009				#pwm-cells = <3>;
1010				status = "disabled";
1011			};
1012
1013			pwm2: pwm@30670000 {
1014				compatible = "fsl,imx8mq-pwm", "fsl,imx27-pwm";
1015				reg = <0x30670000 0x10000>;
1016				interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
1017				clocks = <&clk IMX8MQ_CLK_PWM2_ROOT>,
1018				         <&clk IMX8MQ_CLK_PWM2_ROOT>;
1019				clock-names = "ipg", "per";
1020				#pwm-cells = <3>;
1021				status = "disabled";
1022			};
1023
1024			pwm3: pwm@30680000 {
1025				compatible = "fsl,imx8mq-pwm", "fsl,imx27-pwm";
1026				reg = <0x30680000 0x10000>;
1027				interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
1028				clocks = <&clk IMX8MQ_CLK_PWM3_ROOT>,
1029				         <&clk IMX8MQ_CLK_PWM3_ROOT>;
1030				clock-names = "ipg", "per";
1031				#pwm-cells = <3>;
1032				status = "disabled";
1033			};
1034
1035			pwm4: pwm@30690000 {
1036				compatible = "fsl,imx8mq-pwm", "fsl,imx27-pwm";
1037				reg = <0x30690000 0x10000>;
1038				interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
1039				clocks = <&clk IMX8MQ_CLK_PWM4_ROOT>,
1040				         <&clk IMX8MQ_CLK_PWM4_ROOT>;
1041				clock-names = "ipg", "per";
1042				#pwm-cells = <3>;
1043				status = "disabled";
1044			};
1045
1046			system_counter: timer@306a0000 {
1047				compatible = "nxp,sysctr-timer";
1048				reg = <0x306a0000 0x20000>;
1049				interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
1050				clocks = <&osc_25m>;
1051				clock-names = "per";
1052			};
1053		};
1054
1055		aips3: bus@30800000 { /* AIPS3 */
1056			compatible = "fsl,aips-bus", "simple-bus";
1057			reg = <0x30800000 0x400000>;
1058			#address-cells = <1>;
1059			#size-cells = <1>;
1060			ranges = <0x30800000 0x30800000 0x400000>,
1061				 <0x08000000 0x08000000 0x10000000>;
1062
1063			spdif1: spdif@30810000 {
1064				compatible = "fsl,imx35-spdif";
1065				reg = <0x30810000 0x10000>;
1066				interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
1067				clocks = <&clk IMX8MQ_CLK_IPG_ROOT>, /* core */
1068					<&clk IMX8MQ_CLK_25M>, /* rxtx0 */
1069					<&clk IMX8MQ_CLK_SPDIF1>, /* rxtx1 */
1070					<&clk IMX8MQ_CLK_DUMMY>, /* rxtx2 */
1071					<&clk IMX8MQ_CLK_DUMMY>, /* rxtx3 */
1072					<&clk IMX8MQ_CLK_DUMMY>, /* rxtx4 */
1073					<&clk IMX8MQ_CLK_IPG_ROOT>, /* rxtx5 */
1074					<&clk IMX8MQ_CLK_DUMMY>, /* rxtx6 */
1075					<&clk IMX8MQ_CLK_DUMMY>, /* rxtx7 */
1076					<&clk IMX8MQ_CLK_DUMMY>; /* spba */
1077				clock-names = "core", "rxtx0",
1078					      "rxtx1", "rxtx2",
1079					      "rxtx3", "rxtx4",
1080					      "rxtx5", "rxtx6",
1081					      "rxtx7", "spba";
1082				dmas = <&sdma1 8 18 0>, <&sdma1 9 18 0>;
1083				dma-names = "rx", "tx";
1084				status = "disabled";
1085			};
1086
1087			ecspi1: spi@30820000 {
1088				#address-cells = <1>;
1089				#size-cells = <0>;
1090				compatible = "fsl,imx8mq-ecspi", "fsl,imx51-ecspi";
1091				reg = <0x30820000 0x10000>;
1092				interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
1093				clocks = <&clk IMX8MQ_CLK_ECSPI1_ROOT>,
1094					 <&clk IMX8MQ_CLK_ECSPI1_ROOT>;
1095				clock-names = "ipg", "per";
1096				dmas = <&sdma1 0 7 1>, <&sdma1 1 7 2>;
1097				dma-names = "rx", "tx";
1098				status = "disabled";
1099			};
1100
1101			ecspi2: spi@30830000 {
1102				#address-cells = <1>;
1103				#size-cells = <0>;
1104				compatible = "fsl,imx8mq-ecspi", "fsl,imx51-ecspi";
1105				reg = <0x30830000 0x10000>;
1106				interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
1107				clocks = <&clk IMX8MQ_CLK_ECSPI2_ROOT>,
1108					 <&clk IMX8MQ_CLK_ECSPI2_ROOT>;
1109				clock-names = "ipg", "per";
1110				dmas = <&sdma1 2 7 1>, <&sdma1 3 7 2>;
1111				dma-names = "rx", "tx";
1112				status = "disabled";
1113			};
1114
1115			ecspi3: spi@30840000 {
1116				#address-cells = <1>;
1117				#size-cells = <0>;
1118				compatible = "fsl,imx8mq-ecspi", "fsl,imx51-ecspi";
1119				reg = <0x30840000 0x10000>;
1120				interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
1121				clocks = <&clk IMX8MQ_CLK_ECSPI3_ROOT>,
1122					 <&clk IMX8MQ_CLK_ECSPI3_ROOT>;
1123				clock-names = "ipg", "per";
1124				dmas = <&sdma1 4 7 1>, <&sdma1 5 7 2>;
1125				dma-names = "rx", "tx";
1126				status = "disabled";
1127			};
1128
1129			uart1: serial@30860000 {
1130				compatible = "fsl,imx8mq-uart",
1131				             "fsl,imx6q-uart";
1132				reg = <0x30860000 0x10000>;
1133				interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
1134				clocks = <&clk IMX8MQ_CLK_UART1_ROOT>,
1135				         <&clk IMX8MQ_CLK_UART1_ROOT>;
1136				clock-names = "ipg", "per";
1137				dmas = <&sdma1 22 4 0>, <&sdma1 23 4 0>;
1138				dma-names = "rx", "tx";
1139				status = "disabled";
1140			};
1141
1142			uart3: serial@30880000 {
1143				compatible = "fsl,imx8mq-uart",
1144				             "fsl,imx6q-uart";
1145				reg = <0x30880000 0x10000>;
1146				interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
1147				clocks = <&clk IMX8MQ_CLK_UART3_ROOT>,
1148				         <&clk IMX8MQ_CLK_UART3_ROOT>;
1149				clock-names = "ipg", "per";
1150				dmas = <&sdma1 26 4 0>, <&sdma1 27 4 0>;
1151				dma-names = "rx", "tx";
1152				status = "disabled";
1153			};
1154
1155			uart2: serial@30890000 {
1156				compatible = "fsl,imx8mq-uart",
1157				             "fsl,imx6q-uart";
1158				reg = <0x30890000 0x10000>;
1159				interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
1160				clocks = <&clk IMX8MQ_CLK_UART2_ROOT>,
1161				         <&clk IMX8MQ_CLK_UART2_ROOT>;
1162				clock-names = "ipg", "per";
1163				dmas = <&sdma1 24 4 0>, <&sdma1 25 4 0>;
1164				dma-names = "rx", "tx";
1165				status = "disabled";
1166			};
1167
1168			spdif2: spdif@308a0000 {
1169				compatible = "fsl,imx35-spdif";
1170				reg = <0x308a0000 0x10000>;
1171				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
1172				clocks = <&clk IMX8MQ_CLK_IPG_ROOT>, /* core */
1173					<&clk IMX8MQ_CLK_25M>, /* rxtx0 */
1174					<&clk IMX8MQ_CLK_SPDIF2>, /* rxtx1 */
1175					<&clk IMX8MQ_CLK_DUMMY>, /* rxtx2 */
1176					<&clk IMX8MQ_CLK_DUMMY>, /* rxtx3 */
1177					<&clk IMX8MQ_CLK_DUMMY>, /* rxtx4 */
1178					<&clk IMX8MQ_CLK_IPG_ROOT>, /* rxtx5 */
1179					<&clk IMX8MQ_CLK_DUMMY>, /* rxtx6 */
1180					<&clk IMX8MQ_CLK_DUMMY>, /* rxtx7 */
1181					<&clk IMX8MQ_CLK_DUMMY>; /* spba */
1182				clock-names = "core", "rxtx0",
1183					      "rxtx1", "rxtx2",
1184					      "rxtx3", "rxtx4",
1185					      "rxtx5", "rxtx6",
1186					      "rxtx7", "spba";
1187				dmas = <&sdma1 16 18 0>, <&sdma1 17 18 0>;
1188				dma-names = "rx", "tx";
1189				status = "disabled";
1190			};
1191
1192			sai2: sai@308b0000 {
1193				#sound-dai-cells = <0>;
1194				compatible = "fsl,imx8mq-sai";
1195				reg = <0x308b0000 0x10000>;
1196				interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
1197				clocks = <&clk IMX8MQ_CLK_SAI2_IPG>,
1198					 <&clk IMX8MQ_CLK_SAI2_ROOT>,
1199					 <&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_CLK_DUMMY>;
1200				clock-names = "bus", "mclk1", "mclk2", "mclk3";
1201				dmas = <&sdma1 10 24 0>, <&sdma1 11 24 0>;
1202				dma-names = "rx", "tx";
1203				status = "disabled";
1204			};
1205
1206			sai3: sai@308c0000 {
1207				#sound-dai-cells = <0>;
1208				compatible = "fsl,imx8mq-sai";
1209				reg = <0x308c0000 0x10000>;
1210				interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
1211				clocks = <&clk IMX8MQ_CLK_SAI3_IPG>,
1212				         <&clk IMX8MQ_CLK_SAI3_ROOT>,
1213				         <&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_CLK_DUMMY>;
1214				clock-names = "bus", "mclk1", "mclk2", "mclk3";
1215				dmas = <&sdma1 12 24 0>, <&sdma1 13 24 0>;
1216				dma-names = "rx", "tx";
1217				status = "disabled";
1218			};
1219
1220			crypto: crypto@30900000 {
1221				compatible = "fsl,sec-v4.0";
1222				#address-cells = <1>;
1223				#size-cells = <1>;
1224				reg = <0x30900000 0x40000>;
1225				ranges = <0 0x30900000 0x40000>;
1226				interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
1227				clocks = <&clk IMX8MQ_CLK_AHB>,
1228					 <&clk IMX8MQ_CLK_IPG_ROOT>;
1229				clock-names = "aclk", "ipg";
1230
1231				sec_jr0: jr@1000 {
1232					compatible = "fsl,sec-v4.0-job-ring";
1233					reg = <0x1000 0x1000>;
1234					interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
1235					status = "disabled";
1236				};
1237
1238				sec_jr1: jr@2000 {
1239					compatible = "fsl,sec-v4.0-job-ring";
1240					reg = <0x2000 0x1000>;
1241					interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
1242				};
1243
1244				sec_jr2: jr@3000 {
1245					compatible = "fsl,sec-v4.0-job-ring";
1246					reg = <0x3000 0x1000>;
1247					interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
1248				};
1249			};
1250
1251			mipi_dsi: dsi@30a00000 {
1252				compatible = "fsl,imx8mq-nwl-dsi";
1253				reg = <0x30a00000 0x300>;
1254				#address-cells = <1>;
1255				#size-cells = <0>;
1256				clocks = <&clk IMX8MQ_CLK_DSI_CORE>,
1257					 <&clk IMX8MQ_CLK_DSI_AHB>,
1258					 <&clk IMX8MQ_CLK_DSI_IPG_DIV>,
1259					 <&clk IMX8MQ_CLK_DSI_PHY_REF>,
1260					 <&clk IMX8MQ_CLK_LCDIF_PIXEL>;
1261				clock-names = "core", "rx_esc", "tx_esc", "phy_ref", "lcdif";
1262				assigned-clocks = <&clk IMX8MQ_CLK_DSI_AHB>,
1263						  <&clk IMX8MQ_CLK_DSI_CORE>,
1264						  <&clk IMX8MQ_CLK_DSI_IPG_DIV>;
1265				assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_80M>,
1266							 <&clk IMX8MQ_SYS1_PLL_266M>;
1267				assigned-clock-rates = <80000000>, <266000000>, <20000000>;
1268				interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
1269				mux-controls = <&mux 0>;
1270				power-domains = <&pgc_mipi>;
1271				phys = <&dphy>;
1272				phy-names = "dphy";
1273				resets = <&src IMX8MQ_RESET_MIPI_DSI_RESET_BYTE_N>,
1274					 <&src IMX8MQ_RESET_MIPI_DSI_DPI_RESET_N>,
1275					 <&src IMX8MQ_RESET_MIPI_DSI_ESC_RESET_N>,
1276					 <&src IMX8MQ_RESET_MIPI_DSI_PCLK_RESET_N>;
1277				reset-names = "byte", "dpi", "esc", "pclk";
1278				status = "disabled";
1279
1280				ports {
1281					#address-cells = <1>;
1282					#size-cells = <0>;
1283
1284					port@0 {
1285						reg = <0>;
1286						#address-cells = <1>;
1287						#size-cells = <0>;
1288						mipi_dsi_lcdif_in: endpoint@0 {
1289							reg = <0>;
1290							remote-endpoint = <&lcdif_mipi_dsi>;
1291						};
1292					};
1293				};
1294			};
1295
1296			dphy: dphy@30a00300 {
1297				compatible = "fsl,imx8mq-mipi-dphy";
1298				reg = <0x30a00300 0x100>;
1299				clocks = <&clk IMX8MQ_CLK_DSI_PHY_REF>;
1300				clock-names = "phy_ref";
1301				assigned-clocks = <&clk IMX8MQ_VIDEO_PLL1_REF_SEL>,
1302						  <&clk IMX8MQ_VIDEO_PLL1_BYPASS>,
1303						  <&clk IMX8MQ_CLK_DSI_PHY_REF>,
1304						  <&clk IMX8MQ_VIDEO_PLL1>;
1305				assigned-clock-parents = <&clk IMX8MQ_CLK_25M>,
1306						  <&clk IMX8MQ_VIDEO_PLL1>,
1307						  <&clk IMX8MQ_VIDEO_PLL1_OUT>;
1308				assigned-clock-rates = <0>, <0>, <24000000>, <594000000>;
1309				#phy-cells = <0>;
1310				power-domains = <&pgc_mipi>;
1311				status = "disabled";
1312			};
1313
1314			i2c1: i2c@30a20000 {
1315				compatible = "fsl,imx8mq-i2c", "fsl,imx21-i2c";
1316				reg = <0x30a20000 0x10000>;
1317				interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
1318				clocks = <&clk IMX8MQ_CLK_I2C1_ROOT>;
1319				#address-cells = <1>;
1320				#size-cells = <0>;
1321				status = "disabled";
1322			};
1323
1324			i2c2: i2c@30a30000 {
1325				compatible = "fsl,imx8mq-i2c", "fsl,imx21-i2c";
1326				reg = <0x30a30000 0x10000>;
1327				interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
1328				clocks = <&clk IMX8MQ_CLK_I2C2_ROOT>;
1329				#address-cells = <1>;
1330				#size-cells = <0>;
1331				status = "disabled";
1332			};
1333
1334			i2c3: i2c@30a40000 {
1335				compatible = "fsl,imx8mq-i2c", "fsl,imx21-i2c";
1336				reg = <0x30a40000 0x10000>;
1337				interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
1338				clocks = <&clk IMX8MQ_CLK_I2C3_ROOT>;
1339				#address-cells = <1>;
1340				#size-cells = <0>;
1341				status = "disabled";
1342			};
1343
1344			i2c4: i2c@30a50000 {
1345				compatible = "fsl,imx8mq-i2c", "fsl,imx21-i2c";
1346				reg = <0x30a50000 0x10000>;
1347				interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
1348				clocks = <&clk IMX8MQ_CLK_I2C4_ROOT>;
1349				#address-cells = <1>;
1350				#size-cells = <0>;
1351				status = "disabled";
1352			};
1353
1354			uart4: serial@30a60000 {
1355				compatible = "fsl,imx8mq-uart",
1356				             "fsl,imx6q-uart";
1357				reg = <0x30a60000 0x10000>;
1358				interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
1359				clocks = <&clk IMX8MQ_CLK_UART4_ROOT>,
1360				         <&clk IMX8MQ_CLK_UART4_ROOT>;
1361				clock-names = "ipg", "per";
1362				dmas = <&sdma1 28 4 0>, <&sdma1 29 4 0>;
1363				dma-names = "rx", "tx";
1364				status = "disabled";
1365			};
1366
1367			mipi_csi1: csi@30a70000 {
1368				compatible = "fsl,imx8mq-mipi-csi2";
1369				reg = <0x30a70000 0x1000>;
1370				clocks = <&clk IMX8MQ_CLK_CSI1_CORE>,
1371				   <&clk IMX8MQ_CLK_CSI1_ESC>,
1372				   <&clk IMX8MQ_CLK_CSI1_PHY_REF>;
1373				clock-names = "core", "esc", "ui";
1374				assigned-clocks = <&clk IMX8MQ_CLK_CSI1_CORE>,
1375				    <&clk IMX8MQ_CLK_CSI1_PHY_REF>,
1376				    <&clk IMX8MQ_CLK_CSI1_ESC>;
1377				assigned-clock-rates = <266000000>, <333000000>, <66000000>;
1378				assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_266M>,
1379					<&clk IMX8MQ_SYS2_PLL_1000M>,
1380					<&clk IMX8MQ_SYS1_PLL_800M>;
1381				power-domains = <&pgc_mipi_csi1>;
1382				resets = <&src IMX8MQ_RESET_MIPI_CSI1_CORE_RESET>,
1383					 <&src IMX8MQ_RESET_MIPI_CSI1_PHY_REF_RESET>,
1384					 <&src IMX8MQ_RESET_MIPI_CSI1_ESC_RESET>;
1385				fsl,mipi-phy-gpr = <&iomuxc_gpr 0x88>;
1386				interconnects = <&noc IMX8MQ_ICM_CSI1 &noc IMX8MQ_ICS_DRAM>;
1387				interconnect-names = "dram";
1388				status = "disabled";
1389
1390				ports {
1391					#address-cells = <1>;
1392					#size-cells = <0>;
1393
1394					port@1 {
1395						reg = <1>;
1396
1397						csi1_mipi_ep: endpoint {
1398							remote-endpoint = <&csi1_ep>;
1399						};
1400					};
1401				};
1402			};
1403
1404			csi1: csi@30a90000 {
1405				compatible = "fsl,imx8mq-csi";
1406				reg = <0x30a90000 0x10000>;
1407				interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
1408				clocks = <&clk IMX8MQ_CLK_CSI1_ROOT>;
1409				clock-names = "mclk";
1410				status = "disabled";
1411
1412				port {
1413					csi1_ep: endpoint {
1414						remote-endpoint = <&csi1_mipi_ep>;
1415					};
1416				};
1417			};
1418
1419			mipi_csi2: csi@30b60000 {
1420				compatible = "fsl,imx8mq-mipi-csi2";
1421				reg = <0x30b60000 0x1000>;
1422				clocks = <&clk IMX8MQ_CLK_CSI2_CORE>,
1423				   <&clk IMX8MQ_CLK_CSI2_ESC>,
1424				   <&clk IMX8MQ_CLK_CSI2_PHY_REF>;
1425				clock-names = "core", "esc", "ui";
1426				assigned-clocks = <&clk IMX8MQ_CLK_CSI2_CORE>,
1427				    <&clk IMX8MQ_CLK_CSI2_PHY_REF>,
1428				    <&clk IMX8MQ_CLK_CSI2_ESC>;
1429				assigned-clock-rates = <266000000>, <333000000>, <66000000>;
1430				assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_266M>,
1431					<&clk IMX8MQ_SYS2_PLL_1000M>,
1432					<&clk IMX8MQ_SYS1_PLL_800M>;
1433				power-domains = <&pgc_mipi_csi2>;
1434				resets = <&src IMX8MQ_RESET_MIPI_CSI2_CORE_RESET>,
1435					 <&src IMX8MQ_RESET_MIPI_CSI2_PHY_REF_RESET>,
1436					 <&src IMX8MQ_RESET_MIPI_CSI2_ESC_RESET>;
1437				fsl,mipi-phy-gpr = <&iomuxc_gpr 0xa4>;
1438				interconnects = <&noc IMX8MQ_ICM_CSI2 &noc IMX8MQ_ICS_DRAM>;
1439				interconnect-names = "dram";
1440				status = "disabled";
1441
1442				ports {
1443					#address-cells = <1>;
1444					#size-cells = <0>;
1445
1446					port@1 {
1447						reg = <1>;
1448
1449						csi2_mipi_ep: endpoint {
1450							remote-endpoint = <&csi2_ep>;
1451						};
1452					};
1453				};
1454			};
1455
1456			csi2: csi@30b80000 {
1457				compatible = "fsl,imx8mq-csi";
1458				reg = <0x30b80000 0x10000>;
1459				interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
1460				clocks = <&clk IMX8MQ_CLK_CSI2_ROOT>;
1461				clock-names = "mclk";
1462				status = "disabled";
1463
1464				port {
1465					csi2_ep: endpoint {
1466						remote-endpoint = <&csi2_mipi_ep>;
1467					};
1468				};
1469			};
1470
1471			mu: mailbox@30aa0000 {
1472				compatible = "fsl,imx8mq-mu", "fsl,imx6sx-mu";
1473				reg = <0x30aa0000 0x10000>;
1474				interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
1475				clocks = <&clk IMX8MQ_CLK_MU_ROOT>;
1476				#mbox-cells = <2>;
1477			};
1478
1479			usdhc1: mmc@30b40000 {
1480				compatible = "fsl,imx8mq-usdhc",
1481				             "fsl,imx7d-usdhc";
1482				reg = <0x30b40000 0x10000>;
1483				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
1484				clocks = <&clk IMX8MQ_CLK_IPG_ROOT>,
1485				         <&clk IMX8MQ_CLK_NAND_USDHC_BUS>,
1486				         <&clk IMX8MQ_CLK_USDHC1_ROOT>;
1487				clock-names = "ipg", "ahb", "per";
1488				fsl,tuning-start-tap = <20>;
1489				fsl,tuning-step = <2>;
1490				bus-width = <4>;
1491				status = "disabled";
1492			};
1493
1494			usdhc2: mmc@30b50000 {
1495				compatible = "fsl,imx8mq-usdhc",
1496				             "fsl,imx7d-usdhc";
1497				reg = <0x30b50000 0x10000>;
1498				interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
1499				clocks = <&clk IMX8MQ_CLK_IPG_ROOT>,
1500				         <&clk IMX8MQ_CLK_NAND_USDHC_BUS>,
1501				         <&clk IMX8MQ_CLK_USDHC2_ROOT>;
1502				clock-names = "ipg", "ahb", "per";
1503				fsl,tuning-start-tap = <20>;
1504				fsl,tuning-step = <2>;
1505				bus-width = <4>;
1506				status = "disabled";
1507			};
1508
1509			qspi0: spi@30bb0000 {
1510				#address-cells = <1>;
1511				#size-cells = <0>;
1512				compatible = "fsl,imx8mq-qspi", "fsl,imx7d-qspi";
1513				reg = <0x30bb0000 0x10000>,
1514				      <0x08000000 0x10000000>;
1515				reg-names = "QuadSPI", "QuadSPI-memory";
1516				interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
1517				clocks = <&clk IMX8MQ_CLK_QSPI_ROOT>,
1518					 <&clk IMX8MQ_CLK_QSPI_ROOT>;
1519				clock-names = "qspi_en", "qspi";
1520				status = "disabled";
1521			};
1522
1523			sdma1: dma-controller@30bd0000 {
1524				compatible = "fsl,imx8mq-sdma","fsl,imx7d-sdma";
1525				reg = <0x30bd0000 0x10000>;
1526				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
1527				clocks = <&clk IMX8MQ_CLK_SDMA1_ROOT>,
1528					 <&clk IMX8MQ_CLK_AHB>;
1529				clock-names = "ipg", "ahb";
1530				#dma-cells = <3>;
1531				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
1532			};
1533
1534			fec1: ethernet@30be0000 {
1535				compatible = "fsl,imx8mq-fec", "fsl,imx6sx-fec";
1536				reg = <0x30be0000 0x10000>;
1537				interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
1538				             <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
1539					     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
1540					     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
1541				clocks = <&clk IMX8MQ_CLK_ENET1_ROOT>,
1542				         <&clk IMX8MQ_CLK_ENET1_ROOT>,
1543				         <&clk IMX8MQ_CLK_ENET_TIMER>,
1544				         <&clk IMX8MQ_CLK_ENET_REF>,
1545				         <&clk IMX8MQ_CLK_ENET_PHY_REF>;
1546				clock-names = "ipg", "ahb", "ptp",
1547				              "enet_clk_ref", "enet_out";
1548				assigned-clocks = <&clk IMX8MQ_CLK_ENET_AXI>,
1549						  <&clk IMX8MQ_CLK_ENET_TIMER>,
1550						  <&clk IMX8MQ_CLK_ENET_REF>,
1551						  <&clk IMX8MQ_CLK_ENET_PHY_REF>;
1552				assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_266M>,
1553							 <&clk IMX8MQ_SYS2_PLL_100M>,
1554							 <&clk IMX8MQ_SYS2_PLL_125M>,
1555							 <&clk IMX8MQ_SYS2_PLL_50M>;
1556				assigned-clock-rates = <0>, <100000000>, <125000000>, <0>;
1557				fsl,num-tx-queues = <3>;
1558				fsl,num-rx-queues = <3>;
1559				nvmem-cells = <&fec_mac_address>;
1560				nvmem-cell-names = "mac-address";
1561				fsl,stop-mode = <&iomuxc_gpr 0x10 3>;
1562				status = "disabled";
1563			};
1564		};
1565
1566		noc: interconnect@32700000 {
1567			compatible = "fsl,imx8mq-noc", "fsl,imx8m-noc";
1568			reg = <0x32700000 0x100000>;
1569			clocks = <&clk IMX8MQ_CLK_NOC>;
1570			fsl,ddrc = <&ddrc>;
1571			#interconnect-cells = <1>;
1572			operating-points-v2 = <&noc_opp_table>;
1573
1574			noc_opp_table: opp-table {
1575				compatible = "operating-points-v2";
1576
1577				opp-133000000 {
1578					opp-hz = /bits/ 64 <133333333>;
1579				};
1580
1581				opp-400000000 {
1582					opp-hz = /bits/ 64 <400000000>;
1583				};
1584
1585				opp-800000000 {
1586					opp-hz = /bits/ 64 <800000000>;
1587				};
1588			};
1589		};
1590
1591		aips4: bus@32c00000 { /* AIPS4 */
1592			compatible = "fsl,aips-bus", "simple-bus";
1593			reg = <0x32c00000 0x400000>;
1594			#address-cells = <1>;
1595			#size-cells = <1>;
1596			ranges = <0x32c00000 0x32c00000 0x400000>;
1597
1598			irqsteer: interrupt-controller@32e2d000 {
1599				compatible = "fsl,imx8m-irqsteer", "fsl,imx-irqsteer";
1600				reg = <0x32e2d000 0x1000>;
1601				interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
1602				clocks = <&clk IMX8MQ_CLK_DISP_APB_ROOT>;
1603				clock-names = "ipg";
1604				fsl,channel = <0>;
1605				fsl,num-irqs = <64>;
1606				interrupt-controller;
1607				#interrupt-cells = <1>;
1608			};
1609		};
1610
1611		gpu: gpu@38000000 {
1612			compatible = "vivante,gc";
1613			reg = <0x38000000 0x40000>;
1614			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
1615			clocks = <&clk IMX8MQ_CLK_GPU_ROOT>,
1616			         <&clk IMX8MQ_CLK_GPU_SHADER_DIV>,
1617			         <&clk IMX8MQ_CLK_GPU_AXI>,
1618			         <&clk IMX8MQ_CLK_GPU_AHB>;
1619			clock-names = "core", "shader", "bus", "reg";
1620			#cooling-cells = <2>;
1621			assigned-clocks = <&clk IMX8MQ_CLK_GPU_CORE_SRC>,
1622			                  <&clk IMX8MQ_CLK_GPU_SHADER_SRC>,
1623			                  <&clk IMX8MQ_CLK_GPU_AXI>,
1624			                  <&clk IMX8MQ_CLK_GPU_AHB>,
1625			                  <&clk IMX8MQ_GPU_PLL_BYPASS>;
1626			assigned-clock-parents = <&clk IMX8MQ_GPU_PLL_OUT>,
1627			                         <&clk IMX8MQ_GPU_PLL_OUT>,
1628			                         <&clk IMX8MQ_GPU_PLL_OUT>,
1629			                         <&clk IMX8MQ_GPU_PLL_OUT>,
1630			                         <&clk IMX8MQ_GPU_PLL>;
1631			assigned-clock-rates = <800000000>, <800000000>,
1632			                       <800000000>, <800000000>, <0>;
1633			power-domains = <&pgc_gpu>;
1634		};
1635
1636		usb_dwc3_0: usb@38100000 {
1637			compatible = "fsl,imx8mq-dwc3", "snps,dwc3";
1638			reg = <0x38100000 0x10000>;
1639			clocks = <&clk IMX8MQ_CLK_USB1_CTRL_ROOT>,
1640			         <&clk IMX8MQ_CLK_USB_CORE_REF>,
1641				 <&clk IMX8MQ_CLK_32K>;
1642			clock-names = "bus_early", "ref", "suspend";
1643			assigned-clocks = <&clk IMX8MQ_CLK_USB_BUS>,
1644			                  <&clk IMX8MQ_CLK_USB_CORE_REF>;
1645			assigned-clock-parents = <&clk IMX8MQ_SYS2_PLL_500M>,
1646			                         <&clk IMX8MQ_SYS1_PLL_100M>;
1647			assigned-clock-rates = <500000000>, <100000000>;
1648			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
1649			phys = <&usb3_phy0>, <&usb3_phy0>;
1650			phy-names = "usb2-phy", "usb3-phy";
1651			power-domains = <&pgc_otg1>;
1652			status = "disabled";
1653		};
1654
1655		usb3_phy0: usb-phy@381f0040 {
1656			compatible = "fsl,imx8mq-usb-phy";
1657			reg = <0x381f0040 0x40>;
1658			clocks = <&clk IMX8MQ_CLK_USB1_PHY_ROOT>;
1659			clock-names = "phy";
1660			assigned-clocks = <&clk IMX8MQ_CLK_USB_PHY_REF>;
1661			assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_100M>;
1662			assigned-clock-rates = <100000000>;
1663			#phy-cells = <0>;
1664			status = "disabled";
1665		};
1666
1667		usb_dwc3_1: usb@38200000 {
1668			compatible = "fsl,imx8mq-dwc3", "snps,dwc3";
1669			reg = <0x38200000 0x10000>;
1670			clocks = <&clk IMX8MQ_CLK_USB2_CTRL_ROOT>,
1671			         <&clk IMX8MQ_CLK_USB_CORE_REF>,
1672				 <&clk IMX8MQ_CLK_32K>;
1673			clock-names = "bus_early", "ref", "suspend";
1674			assigned-clocks = <&clk IMX8MQ_CLK_USB_BUS>,
1675			                  <&clk IMX8MQ_CLK_USB_CORE_REF>;
1676			assigned-clock-parents = <&clk IMX8MQ_SYS2_PLL_500M>,
1677			                         <&clk IMX8MQ_SYS1_PLL_100M>;
1678			assigned-clock-rates = <500000000>, <100000000>;
1679			interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
1680			phys = <&usb3_phy1>, <&usb3_phy1>;
1681			phy-names = "usb2-phy", "usb3-phy";
1682			power-domains = <&pgc_otg2>;
1683			status = "disabled";
1684		};
1685
1686		usb3_phy1: usb-phy@382f0040 {
1687			compatible = "fsl,imx8mq-usb-phy";
1688			reg = <0x382f0040 0x40>;
1689			clocks = <&clk IMX8MQ_CLK_USB2_PHY_ROOT>;
1690			clock-names = "phy";
1691			assigned-clocks = <&clk IMX8MQ_CLK_USB_PHY_REF>;
1692			assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_100M>;
1693			assigned-clock-rates = <100000000>;
1694			#phy-cells = <0>;
1695			status = "disabled";
1696		};
1697
1698		vpu_g1: video-codec@38300000 {
1699			compatible = "nxp,imx8mq-vpu-g1";
1700			reg = <0x38300000 0x10000>;
1701			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
1702			clocks = <&clk IMX8MQ_CLK_VPU_G1_ROOT>;
1703			power-domains = <&vpu_blk_ctrl IMX8MQ_VPUBLK_PD_G1>;
1704		};
1705
1706		vpu_g2: video-codec@38310000 {
1707			compatible = "nxp,imx8mq-vpu-g2";
1708			reg = <0x38310000 0x10000>;
1709			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
1710			clocks = <&clk IMX8MQ_CLK_VPU_G2_ROOT>;
1711			power-domains = <&vpu_blk_ctrl IMX8MQ_VPUBLK_PD_G2>;
1712		};
1713
1714		vpu_blk_ctrl: blk-ctrl@38320000 {
1715			compatible = "fsl,imx8mq-vpu-blk-ctrl";
1716			reg = <0x38320000 0x100>;
1717			power-domains = <&pgc_vpu>, <&pgc_vpu>, <&pgc_vpu>;
1718			power-domain-names = "bus", "g1", "g2";
1719			clocks = <&clk IMX8MQ_CLK_VPU_G1_ROOT>,
1720				 <&clk IMX8MQ_CLK_VPU_G2_ROOT>;
1721			clock-names = "g1", "g2";
1722			#power-domain-cells = <1>;
1723		};
1724
1725		pcie0: pcie@33800000 {
1726			compatible = "fsl,imx8mq-pcie";
1727			reg = <0x33800000 0x400000>,
1728			      <0x1ff00000 0x80000>;
1729			reg-names = "dbi", "config";
1730			#address-cells = <3>;
1731			#size-cells = <2>;
1732			device_type = "pci";
1733			bus-range = <0x00 0xff>;
1734			ranges = <0x81000000 0 0x00000000 0x1ff80000 0 0x00010000>, /* downstream I/O 64KB */
1735				 <0x82000000 0 0x18000000 0x18000000 0 0x07f00000>; /* non-prefetchable memory */
1736			num-lanes = <1>;
1737			interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
1738			interrupt-names = "msi";
1739			#interrupt-cells = <1>;
1740			interrupt-map-mask = <0 0 0 0x7>;
1741			interrupt-map = <0 0 0 1 &gic GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
1742			                <0 0 0 2 &gic GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
1743			                <0 0 0 3 &gic GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
1744			                <0 0 0 4 &gic GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
1745			fsl,max-link-speed = <2>;
1746			linux,pci-domain = <0>;
1747			clocks = <&clk IMX8MQ_CLK_PCIE1_ROOT>,
1748				 <&clk IMX8MQ_CLK_PCIE1_PHY>,
1749				 <&clk IMX8MQ_CLK_PCIE1_PHY>,
1750				 <&clk IMX8MQ_CLK_PCIE1_AUX>;
1751			clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux";
1752			power-domains = <&pgc_pcie>;
1753			resets = <&src IMX8MQ_RESET_PCIEPHY>,
1754			         <&src IMX8MQ_RESET_PCIE_CTRL_APPS_EN>,
1755			         <&src IMX8MQ_RESET_PCIE_CTRL_APPS_TURNOFF>;
1756			reset-names = "pciephy", "apps", "turnoff";
1757			assigned-clocks = <&clk IMX8MQ_CLK_PCIE1_CTRL>,
1758			                  <&clk IMX8MQ_CLK_PCIE1_PHY>,
1759			                  <&clk IMX8MQ_CLK_PCIE1_AUX>;
1760			assigned-clock-parents = <&clk IMX8MQ_SYS2_PLL_250M>,
1761			                         <&clk IMX8MQ_SYS2_PLL_100M>,
1762			                         <&clk IMX8MQ_SYS1_PLL_80M>;
1763			assigned-clock-rates = <250000000>, <100000000>,
1764			                       <10000000>;
1765			status = "disabled";
1766		};
1767
1768		pcie1: pcie@33c00000 {
1769			compatible = "fsl,imx8mq-pcie";
1770			reg = <0x33c00000 0x400000>,
1771			      <0x27f00000 0x80000>;
1772			reg-names = "dbi", "config";
1773			#address-cells = <3>;
1774			#size-cells = <2>;
1775			device_type = "pci";
1776			bus-range = <0x00 0xff>;
1777			ranges = <0x81000000 0 0x00000000 0x27f80000 0 0x00010000>, /* downstream I/O 64KB */
1778				 <0x82000000 0 0x20000000 0x20000000 0 0x07f00000>; /* non-prefetchable memory */
1779			num-lanes = <1>;
1780			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
1781			interrupt-names = "msi";
1782			#interrupt-cells = <1>;
1783			interrupt-map-mask = <0 0 0 0x7>;
1784			interrupt-map = <0 0 0 1 &gic GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
1785					<0 0 0 2 &gic GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
1786					<0 0 0 3 &gic GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
1787					<0 0 0 4 &gic GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
1788			fsl,max-link-speed = <2>;
1789			linux,pci-domain = <1>;
1790			clocks = <&clk IMX8MQ_CLK_PCIE2_ROOT>,
1791				 <&clk IMX8MQ_CLK_PCIE2_PHY>,
1792				 <&clk IMX8MQ_CLK_PCIE2_PHY>,
1793				 <&clk IMX8MQ_CLK_PCIE2_AUX>;
1794			clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux";
1795			power-domains = <&pgc_pcie>;
1796			resets = <&src IMX8MQ_RESET_PCIEPHY2>,
1797			         <&src IMX8MQ_RESET_PCIE2_CTRL_APPS_EN>,
1798			         <&src IMX8MQ_RESET_PCIE2_CTRL_APPS_TURNOFF>;
1799			reset-names = "pciephy", "apps", "turnoff";
1800			assigned-clocks = <&clk IMX8MQ_CLK_PCIE2_CTRL>,
1801			                  <&clk IMX8MQ_CLK_PCIE2_PHY>,
1802			                  <&clk IMX8MQ_CLK_PCIE2_AUX>;
1803			assigned-clock-parents = <&clk IMX8MQ_SYS2_PLL_250M>,
1804			                         <&clk IMX8MQ_SYS2_PLL_100M>,
1805			                         <&clk IMX8MQ_SYS1_PLL_80M>;
1806			assigned-clock-rates = <250000000>, <100000000>,
1807			                       <10000000>;
1808			status = "disabled";
1809		};
1810
1811		pcie1_ep: pcie-ep@33c00000 {
1812			compatible = "fsl,imx8mq-pcie-ep";
1813			reg = <0x33c00000 0x000400000>,
1814			      <0x20000000 0x08000000>;
1815			reg-names = "dbi", "addr_space";
1816			num-lanes = <1>;
1817			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
1818			interrupt-names = "dma";
1819			fsl,max-link-speed = <2>;
1820			clocks = <&clk IMX8MQ_CLK_PCIE2_ROOT>,
1821				 <&clk IMX8MQ_CLK_PCIE2_PHY>,
1822				 <&clk IMX8MQ_CLK_PCIE2_PHY>,
1823				 <&clk IMX8MQ_CLK_PCIE2_AUX>;
1824			clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux";
1825			power-domains = <&pgc_pcie>;
1826			resets = <&src IMX8MQ_RESET_PCIEPHY2>,
1827				 <&src IMX8MQ_RESET_PCIE2_CTRL_APPS_EN>,
1828				 <&src IMX8MQ_RESET_PCIE2_CTRL_APPS_TURNOFF>;
1829			reset-names = "pciephy", "apps", "turnoff";
1830			assigned-clocks = <&clk IMX8MQ_CLK_PCIE2_CTRL>,
1831					  <&clk IMX8MQ_CLK_PCIE2_PHY>,
1832					  <&clk IMX8MQ_CLK_PCIE2_AUX>;
1833			assigned-clock-parents = <&clk IMX8MQ_SYS2_PLL_250M>,
1834						 <&clk IMX8MQ_SYS2_PLL_100M>,
1835						 <&clk IMX8MQ_SYS1_PLL_80M>;
1836			assigned-clock-rates = <250000000>, <100000000>,
1837					       <10000000>;
1838			num-ib-windows = <4>;
1839			num-ob-windows = <4>;
1840			status = "disabled";
1841		};
1842
1843		gic: interrupt-controller@38800000 {
1844			compatible = "arm,gic-v3";
1845			reg = <0x38800000 0x10000>,	/* GIC Dist */
1846			      <0x38880000 0xc0000>,	/* GICR */
1847			      <0x31000000 0x2000>,	/* GICC */
1848			      <0x31010000 0x2000>,	/* GICV */
1849			      <0x31020000 0x2000>;	/* GICH */
1850			#interrupt-cells = <3>;
1851			interrupt-controller;
1852			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
1853			interrupt-parent = <&gic>;
1854		};
1855
1856		ddrc: memory-controller@3d400000 {
1857			compatible = "fsl,imx8mq-ddrc", "fsl,imx8m-ddrc";
1858			reg = <0x3d400000 0x400000>;
1859			clock-names = "core", "pll", "alt", "apb";
1860			clocks = <&clk IMX8MQ_CLK_DRAM_CORE>,
1861				 <&clk IMX8MQ_DRAM_PLL_OUT>,
1862				 <&clk IMX8MQ_CLK_DRAM_ALT>,
1863				 <&clk IMX8MQ_CLK_DRAM_APB>;
1864			status = "disabled";
1865		};
1866
1867		ddr-pmu@3d800000 {
1868			compatible = "fsl,imx8mq-ddr-pmu", "fsl,imx8m-ddr-pmu";
1869			reg = <0x3d800000 0x400000>;
1870			interrupt-parent = <&gic>;
1871			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
1872		};
1873	};
1874};
1875