xref: /linux/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts (revision 85f17d677f6c40069287617630f202eb20fcfe36) 
1// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
2/*
3 * Copyright 2021-2022 TQ-Systems GmbH
4 * Author: Alexander Stein <alexander.stein@tq-group.com>
5 */
6
7/dts-v1/;
8
9#include <dt-bindings/leds/common.h>
10#include <dt-bindings/net/ti-dp83867.h>
11#include <dt-bindings/pwm/pwm.h>
12#include "imx8mp-tqma8mpql.dtsi"
13
14/ {
15	model = "TQ-Systems i.MX8MPlus TQMa8MPxL on MBa8MPxL";
16	compatible = "tq,imx8mp-tqma8mpql-mba8mpxl", "tq,imx8mp-tqma8mpql", "fsl,imx8mp";
17
18	chosen {
19		stdout-path = &uart4;
20	};
21
22	iio-hwmon {
23		compatible = "iio-hwmon";
24		io-channels = <&adc 0>, <&adc 1>;
25	};
26
27	aliases {
28		mmc0 = &usdhc3;
29		mmc1 = &usdhc2;
30		mmc2 = &usdhc1;
31		rtc0 = &pcf85063;
32		rtc1 = &snvs_rtc;
33		spi0 = &flexspi;
34		spi1 = &ecspi1;
35		spi2 = &ecspi2;
36		spi3 = &ecspi3;
37	};
38
39	backlight_lvds: backlight {
40		compatible = "pwm-backlight";
41		pinctrl-names = "default";
42		pinctrl-0 = <&pinctrl_backlight>;
43		pwms = <&pwm2 0 5000000 0>;
44		brightness-levels = <0 4 8 16 32 64 128 255>;
45		default-brightness-level = <7>;
46		power-supply = <&reg_vcc_12v0>;
47		enable-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
48		status = "disabled";
49	};
50
51	gpio-keys {
52		compatible = "gpio-keys";
53		pinctrl-names = "default";
54		pinctrl-0 = <&pinctrl_gpiobutton>;
55		autorepeat;
56
57		switch-1 {
58			label = "S12";
59			linux,code = <BTN_0>;
60			gpios = <&gpio5 27 GPIO_ACTIVE_LOW>;
61		};
62
63		switch-2 {
64			label = "S13";
65			linux,code = <BTN_1>;
66			gpios = <&gpio5 26 GPIO_ACTIVE_LOW>;
67		};
68	};
69
70	gpio-leds {
71		compatible = "gpio-leds";
72		pinctrl-names = "default";
73		pinctrl-0 = <&pinctrl_gpioled>;
74
75		led-0 {
76			color = <LED_COLOR_ID_GREEN>;
77			function = LED_FUNCTION_STATUS;
78			function-enumerator = <0>;
79			gpios = <&gpio5 5 GPIO_ACTIVE_HIGH>;
80			linux,default-trigger = "default-on";
81		};
82
83		led-1 {
84			color = <LED_COLOR_ID_GREEN>;
85			function = LED_FUNCTION_HEARTBEAT;
86			gpios = <&gpio5 4 GPIO_ACTIVE_HIGH>;
87			linux,default-trigger = "heartbeat";
88		};
89
90		led-2 {
91			color = <LED_COLOR_ID_YELLOW>;
92			function = LED_FUNCTION_STATUS;
93			function-enumerator = <1>;
94			gpios = <&gpio5 3 GPIO_ACTIVE_HIGH>;
95		};
96	};
97
98	display: display {
99		/*
100		 * Display is not fixed, so compatible has to be added from
101		 * DT overlay
102		 */
103		pinctrl-names = "default";
104		pinctrl-0 = <&pinctrl_lvdsdisplay>;
105		power-supply = <&reg_vcc_3v3>;
106		enable-gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>;
107		backlight = <&backlight_lvds>;
108		status = "disabled";
109	};
110
111	reg_usdhc2_vmmc: regulator-usdhc2 {
112		compatible = "regulator-fixed";
113		pinctrl-names = "default";
114		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
115		regulator-name = "VSD_3V3";
116		regulator-min-microvolt = <3300000>;
117		regulator-max-microvolt = <3300000>;
118		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
119		enable-active-high;
120		startup-delay-us = <100>;
121		off-on-delay-us = <12000>;
122	};
123
124	reg_vcc_12v0: regulator-12v0 {
125		compatible = "regulator-fixed";
126		pinctrl-names = "default";
127		pinctrl-0 = <&pinctrl_reg12v0>;
128		regulator-name = "VCC_12V0";
129		regulator-min-microvolt = <12000000>;
130		regulator-max-microvolt = <12000000>;
131		gpio = <&gpio2 6 GPIO_ACTIVE_HIGH>;
132		enable-active-high;
133	};
134
135	reg_vcc_3v3: regulator-3v3 {
136		compatible = "regulator-fixed";
137		regulator-name = "VCC_3V3";
138		regulator-min-microvolt = <3300000>;
139		regulator-max-microvolt = <3300000>;
140	};
141
142	reserved-memory {
143		#address-cells = <2>;
144		#size-cells = <2>;
145		ranges;
146
147		ocram: ocram@900000 {
148			no-map;
149			reg = <0 0x900000 0 0x70000>;
150		};
151
152		/* global autoconfigured region for contiguous allocations */
153		linux,cma {
154			compatible = "shared-dma-pool";
155			reusable;
156			size = <0 0x38000000>;
157			alloc-ranges = <0 0x40000000 0 0xB0000000>;
158			linux,cma-default;
159		};
160	};
161};
162
163&ecspi1 {
164	pinctrl-names = "default";
165	pinctrl-0 = <&pinctrl_ecspi1>;
166	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
167	status = "okay";
168};
169
170&ecspi2 {
171	pinctrl-names = "default";
172	pinctrl-0 = <&pinctrl_ecspi2>;
173	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
174	status = "okay";
175};
176
177&ecspi3 {
178	pinctrl-names = "default";
179	pinctrl-0 = <&pinctrl_ecspi3>;
180	cs-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>;
181	status = "okay";
182
183	adc: adc@0 {
184		reg = <0>;
185		compatible = "microchip,mcp3202";
186		/* 100 ksps * 18 */
187		spi-max-frequency = <1800000>;
188		vref-supply = <&reg_vcc_3v3>;
189		#io-channel-cells = <1>;
190	};
191};
192
193&eqos {
194	pinctrl-names = "default";
195	pinctrl-0 = <&pinctrl_eqos>, <&pinctrl_eqos_phy>;
196	phy-mode = "rgmii-id";
197	phy-handle = <&ethphy3>;
198	status = "okay";
199
200	mdio {
201		compatible = "snps,dwmac-mdio";
202		#address-cells = <1>;
203		#size-cells = <0>;
204
205		ethphy3: ethernet-phy@3 {
206			compatible = "ethernet-phy-ieee802.3-c22";
207			reg = <3>;
208			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
209			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
210			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
211			ti,dp83867-rxctrl-strap-quirk;
212			ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
213			reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
214			reset-assert-us = <500000>;
215			reset-deassert-us = <50000>;
216			enet-phy-lane-no-swap;
217			interrupt-parent = <&gpio4>;
218			interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
219		};
220	};
221};
222
223&fec {
224	pinctrl-names = "default";
225	pinctrl-0 = <&pinctrl_fec>, <&pinctrl_fec_phy>;
226	phy-mode = "rgmii-id";
227	phy-handle = <&ethphy0>;
228	fsl,magic-packet;
229	status = "okay";
230
231	mdio {
232		#address-cells = <1>;
233		#size-cells = <0>;
234
235		ethphy0: ethernet-phy@0 {
236			compatible = "ethernet-phy-ieee802.3-c22";
237			reg = <0>;
238			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
239			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
240			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
241			ti,dp83867-rxctrl-strap-quirk;
242			ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
243			reset-gpios = <&gpio4 0 GPIO_ACTIVE_LOW>;
244			reset-assert-us = <500000>;
245			reset-deassert-us = <50000>;
246			enet-phy-lane-no-swap;
247			interrupt-parent = <&gpio4>;
248			interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
249		};
250	};
251};
252
253&flexcan1 {
254	pinctrl-names = "default";
255	pinctrl-0 = <&pinctrl_flexcan1>;
256	xceiver-supply = <&reg_vcc_3v3>;
257	status = "okay";
258};
259
260&flexcan2 {
261	pinctrl-names = "default";
262	pinctrl-0 = <&pinctrl_flexcan2>;
263	xceiver-supply = <&reg_vcc_3v3>;
264	status = "okay";
265};
266
267&gpio1 {
268	pinctrl-names = "default";
269	pinctrl-0 = <&pinctrl_gpio1>;
270
271	gpio-line-names = "GPO1", "GPO0", "", "GPO3",
272			  "", "", "GPO2", "GPI0",
273			  "PMIC_IRQ", "GPI1", "OTG_ID", "USB_HUB_RST#",
274			  "OTG_PWR", "", "GPI2", "GPI3",
275			  "", "", "", "",
276			  "", "", "", "",
277			  "", "", "", "",
278			  "", "", "", "";
279};
280
281&gpio2 {
282	pinctrl-names = "default";
283	pinctrl-0 = <&pinctrl_hoggpio2>;
284
285	gpio-line-names = "", "", "", "",
286			  "", "", "VCC12V_EN", "PERST#",
287			  "", "", "CLKREQ#", "PEWAKE#",
288			  "USDHC2_CD", "", "", "",
289			  "", "", "", "V_SD3V3_EN",
290			  "", "", "", "",
291			  "", "", "", "",
292			  "", "", "", "";
293
294	perst-hog {
295		gpio-hog;
296		gpios = <7 0>;
297		output-high;
298		line-name = "PERST#";
299	};
300
301	clkreq-hog {
302		gpio-hog;
303		gpios = <10 0>;
304		input;
305		line-name = "CLKREQ#";
306	};
307
308	pewake-hog {
309		gpio-hog;
310		gpios = <11 0>;
311		input;
312		line-name = "PEWAKE#";
313	};
314};
315
316&gpio3 {
317	gpio-line-names = "", "", "", "",
318			  "", "", "", "",
319			  "", "", "", "",
320			  "", "", "LVDS0_RESET#", "",
321			  "", "", "", "LVDS0_BLT_EN",
322			  "LVDS0_PWR_EN", "", "", "",
323			  "", "", "", "",
324			  "", "", "", "";
325};
326
327&gpio4 {
328	pinctrl-names = "default";
329	pinctrl-0 = <&pinctrl_gpio4>;
330
331	gpio-line-names = "ENET0_RST#", "ENET0_INT#", "ENET1_RST#", "ENET1_INT#",
332			  "", "", "", "",
333			  "", "", "", "",
334			  "", "", "", "",
335			  "", "", "DP_IRQ", "DSI_EN",
336			  "HDMI_OC#", "TEMP_EVENT#", "PCIE_CLK_OE#", "",
337			  "", "", "", "FAN_PWR",
338			  "RTC_EVENT#", "CODEC_RST#", "", "";
339};
340
341&gpio5 {
342	gpio-line-names = "", "", "", "LED2",
343			  "LED1", "LED0", "CSI0_RESET#", "CSI0_SYNC",
344			  "CSI0_TRIGGER", "CSI0_ENABLE", "", "",
345			  "", "ECSPI2_SS0", "", "",
346			  "", "", "", "",
347			  "", "", "", "",
348			  "", "ECSPI3_SS0", "SWITCH_A", "SWITCH_B",
349			  "", "", "", "";
350};
351
352&i2c2 {
353	clock-frequency = <384000>;
354	pinctrl-names = "default", "gpio";
355	pinctrl-0 = <&pinctrl_i2c2>;
356	pinctrl-1 = <&pinctrl_i2c2_gpio>;
357	scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
358	sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
359	status = "okay";
360
361	/* NXP SE97BTP with temperature sensor + eeprom */
362	se97_1c: temperature-sensor-eeprom@1c {
363		compatible = "nxp,se97", "jedec,jc-42.4-temp";
364		reg = <0x1c>;
365	};
366
367	at24c02_54: eeprom@54 {
368		compatible = "nxp,se97b", "atmel,24c02";
369		reg = <0x54>;
370		pagesize = <16>;
371		vcc-supply = <&reg_vcc_3v3>;
372	};
373};
374
375&i2c4 {
376	clock-frequency = <384000>;
377	pinctrl-names = "default", "gpio";
378	pinctrl-0 = <&pinctrl_i2c4>;
379	pinctrl-1 = <&pinctrl_i2c4_gpio>;
380	scl-gpios = <&gpio5 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
381	sda-gpios = <&gpio5 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
382	status = "okay";
383};
384
385&i2c6 {
386	clock-frequency = <384000>;
387	pinctrl-names = "default", "gpio";
388	pinctrl-0 = <&pinctrl_i2c6>;
389	pinctrl-1 = <&pinctrl_i2c6_gpio>;
390	scl-gpios = <&gpio2 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
391	sda-gpios = <&gpio2 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
392	status = "okay";
393};
394
395&pcf85063 {
396	/* RTC_EVENT# is connected on MBa8MPxL */
397	pinctrl-names = "default";
398	pinctrl-0 = <&pinctrl_pcf85063>;
399	interrupt-parent = <&gpio4>;
400	interrupts = <28 IRQ_TYPE_EDGE_FALLING>;
401};
402
403&pwm2 {
404	pinctrl-names = "default";
405	pinctrl-0 = <&pinctrl_pwm2>;
406	status = "disabled";
407};
408
409&pwm3 {
410	pinctrl-names = "default";
411	pinctrl-0 = <&pinctrl_pwm3>;
412	status = "okay";
413};
414
415&snvs_pwrkey {
416	status = "okay";
417};
418
419&uart1 {
420	pinctrl-names = "default";
421	pinctrl-0 = <&pinctrl_uart1>;
422	assigned-clocks = <&clk IMX8MP_CLK_UART1>;
423	assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_80M>;
424	status = "okay";
425};
426
427&uart2 {
428	pinctrl-names = "default";
429	pinctrl-0 = <&pinctrl_uart2>;
430	assigned-clocks = <&clk IMX8MP_CLK_UART2>;
431	assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_80M>;
432	status = "okay";
433};
434
435&uart3 {
436	pinctrl-names = "default";
437	pinctrl-0 = <&pinctrl_uart3>;
438	assigned-clocks = <&clk IMX8MP_CLK_UART3>;
439	assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_80M>;
440	status = "okay";
441};
442
443&uart4 {
444	/* console */
445	pinctrl-names = "default";
446	pinctrl-0 = <&pinctrl_uart4>;
447	status = "okay";
448};
449
450&usdhc2 {
451	pinctrl-names = "default", "state_100mhz", "state_200mhz";
452	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
453	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
454	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
455	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
456	vmmc-supply = <&reg_usdhc2_vmmc>;
457	no-mmc;
458	no-sdio;
459	disable-wp;
460	bus-width = <4>;
461	status = "okay";
462};
463
464&iomuxc {
465	pinctrl_backlight: backlightgrp {
466		fsl,pins = <MX8MP_IOMUXC_SAI5_RXFS__GPIO3_IO19		0x14>;
467	};
468
469	pinctrl_flexcan1: flexcan1grp {
470		fsl,pins = <MX8MP_IOMUXC_SAI5_RXD1__CAN1_TX		0x150>,
471			   <MX8MP_IOMUXC_SAI5_RXD2__CAN1_RX		0x150>;
472	};
473
474	pinctrl_flexcan2: flexcan2grp {
475		fsl,pins = <MX8MP_IOMUXC_SAI5_RXD3__CAN2_TX		0x150>,
476			   <MX8MP_IOMUXC_SAI5_MCLK__CAN2_RX		0x150>;
477	};
478
479	/* only on X57, primary used as CSI0 control signals */
480	pinctrl_ecspi1: ecspi1grp {
481		fsl,pins = <MX8MP_IOMUXC_ECSPI1_MISO__ECSPI1_MISO	0x1c0>,
482			   <MX8MP_IOMUXC_ECSPI1_MOSI__ECSPI1_MOSI	0x1c0>,
483			   <MX8MP_IOMUXC_ECSPI1_SCLK__ECSPI1_SCLK	0x1c0>,
484			   <MX8MP_IOMUXC_ECSPI1_SS0__GPIO5_IO09		0x1c0>;
485	};
486
487	/* on X63 and optionally on X57, can also be used as CSI1 control signals */
488	pinctrl_ecspi2: ecspi2grp {
489		fsl,pins = <MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO	0x1c0>,
490			   <MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI	0x1c0>,
491			   <MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK	0x1c0>,
492			   <MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13		0x1c0>;
493	};
494
495	pinctrl_ecspi3: ecspi3grp {
496		fsl,pins = <MX8MP_IOMUXC_UART1_TXD__ECSPI3_MOSI		0x1c0>,
497			   <MX8MP_IOMUXC_UART1_RXD__ECSPI3_SCLK		0x1c0>,
498			   <MX8MP_IOMUXC_UART2_RXD__ECSPI3_MISO		0x1c0>,
499			   <MX8MP_IOMUXC_UART2_TXD__GPIO5_IO25		0x1c0>;
500	};
501
502	pinctrl_eqos: eqosgrp {
503		fsl,pins = <MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC				0x40000044>,
504			   <MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO			0x40000044>,
505			   <MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0			0x90>,
506			   <MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1			0x90>,
507			   <MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2			0x90>,
508			   <MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3			0x90>,
509			   <MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x90>,
510			   <MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL		0x90>,
511			   <MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0			0x12>,
512			   <MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1			0x12>,
513			   <MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2			0x12>,
514			   <MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3			0x12>,
515			   <MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL		0x12>,
516			   <MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x14>;
517	};
518
519	pinctrl_eqos_event: eqosevtgrp {
520		fsl,pins = <MX8MP_IOMUXC_SAI2_RXD0__ENET_QOS_1588_EVENT2_OUT		0x100>,
521			   <MX8MP_IOMUXC_SAI2_TXD0__ENET_QOS_1588_EVENT2_IN		0x1c0>;
522	};
523
524	pinctrl_eqos_phy: eqosphygrp {
525		fsl,pins = <MX8MP_IOMUXC_SAI1_RXD0__GPIO4_IO02				0x100>,
526			   <MX8MP_IOMUXC_SAI1_RXD1__GPIO4_IO03				0x1c0>;
527	};
528
529	pinctrl_fec: fecgrp {
530		fsl,pins = <MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC		0x40000044>,
531			   <MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO		0x40000044>,
532			   <MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0	0x90>,
533			   <MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1	0x90>,
534			   <MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2	0x90>,
535			   <MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3	0x90>,
536			   <MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC	0x90>,
537			   <MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL	0x90>,
538			   <MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0	0x12>,
539			   <MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1	0x12>,
540			   <MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2	0x12>,
541			   <MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3	0x12>,
542			   <MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL	0x12>,
543			   <MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC	0x14>;
544	};
545
546	pinctrl_fec_event: fecevtgrp {
547		fsl,pins = <MX8MP_IOMUXC_SAI1_RXFS__ENET1_1588_EVENT0_IN	0x100>,
548			   <MX8MP_IOMUXC_SAI1_RXC__ENET1_1588_EVENT0_OUT	0x1c0>;
549	};
550
551	pinctrl_fec_phy: fecphygrp {
552		fsl,pins = <MX8MP_IOMUXC_SAI1_RXFS__GPIO4_IO00		0x100>,
553			   <MX8MP_IOMUXC_SAI1_RXC__GPIO4_IO01		0x1c0>;
554	};
555
556	pinctrl_fec_phyalt: fecphyaltgrp {
557		fsl,pins = <MX8MP_IOMUXC_SAI2_TXFS__GPIO4_IO24		0x180>,
558			   <MX8MP_IOMUXC_SAI2_TXC__GPIO4_IO25		0x180>;
559	};
560
561	pinctrl_gpiobutton: gpiobuttongrp {
562		fsl,pins = <MX8MP_IOMUXC_UART3_RXD__GPIO5_IO26		0x10>,
563			   <MX8MP_IOMUXC_UART3_TXD__GPIO5_IO27		0x10>;
564	};
565
566	pinctrl_gpioled: gpioledgrp {
567		fsl,pins = <MX8MP_IOMUXC_SPDIF_EXT_CLK__GPIO5_IO05	0x14>,
568			   <MX8MP_IOMUXC_SPDIF_RX__GPIO5_IO04		0x14>,
569			   <MX8MP_IOMUXC_SPDIF_TX__GPIO5_IO03		0x14>;
570	};
571
572	pinctrl_gpio1: gpio1grp {
573		fsl,pins = <MX8MP_IOMUXC_GPIO1_IO00__GPIO1_IO00		0x10>,
574			   <MX8MP_IOMUXC_GPIO1_IO01__GPIO1_IO01		0x10>,
575			   <MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03		0x10>,
576			   <MX8MP_IOMUXC_GPIO1_IO06__GPIO1_IO06		0x10>,
577			   <MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07		0x80>,
578			   <MX8MP_IOMUXC_GPIO1_IO09__GPIO1_IO09		0x80>,
579			   <MX8MP_IOMUXC_GPIO1_IO14__GPIO1_IO14		0x80>,
580			   <MX8MP_IOMUXC_GPIO1_IO15__GPIO1_IO15		0x80>;
581	};
582
583	pinctrl_gpio4: gpio4grp {
584		fsl,pins = <MX8MP_IOMUXC_SAI1_MCLK__GPIO4_IO20		0x180>,
585			   <MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22		0x180>;
586	};
587
588	pinctrl_hdmi: hdmigrp {
589		fsl,pins = <MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_HDMI_SCL	0x400001c2>,
590			   <MX8MP_IOMUXC_HDMI_DDC_SDA__HDMIMIX_HDMI_SDA	0x400001c2>,
591			   <MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD	0x40000010>,
592			   <MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC	0x40000010>;
593	};
594
595	pinctrl_hoggpio2: hoggpio2grp {
596		fsl,pins = <MX8MP_IOMUXC_SD1_DATA5__GPIO2_IO07		0x140>,
597			   <MX8MP_IOMUXC_SD1_RESET_B__GPIO2_IO10	0x140>,
598			   <MX8MP_IOMUXC_SD1_STROBE__GPIO2_IO11		0x140>;
599	};
600
601	pinctrl_i2c2: i2c2grp {
602		fsl,pins = <MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL		0x400001e2>,
603			   <MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA		0x400001e2>;
604	};
605
606	pinctrl_i2c2_gpio: i2c2-gpiogrp {
607		fsl,pins = <MX8MP_IOMUXC_I2C2_SCL__GPIO5_IO16		0x400001e2>,
608			   <MX8MP_IOMUXC_I2C2_SDA__GPIO5_IO17		0x400001e2>;
609	};
610
611	pinctrl_i2c4: i2c4grp {
612		fsl,pins = <MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL		0x400001e2>,
613			   <MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA		0x400001e2>;
614	};
615
616	pinctrl_i2c4_gpio: i2c4-gpiogrp {
617		fsl,pins = <MX8MP_IOMUXC_I2C4_SCL__GPIO5_IO20		0x400001e2>,
618			   <MX8MP_IOMUXC_I2C4_SDA__GPIO5_IO21		0x400001e2>;
619	};
620
621	pinctrl_i2c6: i2c6grp {
622		fsl,pins = <MX8MP_IOMUXC_SD1_DATA0__I2C6_SCL		0x400001e2>,
623			   <MX8MP_IOMUXC_SD1_DATA1__I2C6_SDA		0x400001e2>;
624	};
625
626	pinctrl_i2c6_gpio: i2c6-gpiogrp {
627		fsl,pins = <MX8MP_IOMUXC_SD1_DATA0__GPIO2_IO02		0x400001e2>,
628			   <MX8MP_IOMUXC_SD1_DATA1__GPIO2_IO03		0x400001e2>;
629	};
630
631	pinctrl_lvdsdisplay: lvdsdisplaygrp {
632		fsl,pins = <MX8MP_IOMUXC_SAI5_RXC__GPIO3_IO20		0x10>; /* Power enable */
633	};
634
635	pinctrl_pcf85063: pcf85063grp {
636		fsl,pins = <MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28		0x80>;
637	};
638
639	/* LVDS Backlight */
640	pinctrl_pwm2: pwm2grp {
641		fsl,pins = <MX8MP_IOMUXC_SAI5_RXD0__PWM2_OUT		0x14>;
642	};
643
644	/* FAN */
645	pinctrl_pwm3: pwm3grp {
646		fsl,pins = <MX8MP_IOMUXC_I2C3_SDA__PWM3_OUT		0x14>;
647	};
648
649	pinctrl_reg12v0: reg12v0grp {
650		fsl,pins = <MX8MP_IOMUXC_SD1_DATA4__GPIO2_IO06		0x140>; /* VCC12V enable */
651	};
652
653	/* X61 */
654	pinctrl_uart1: uart1grp {
655		fsl,pins = <MX8MP_IOMUXC_SD1_CLK__UART1_DCE_TX		0x140>,
656			   <MX8MP_IOMUXC_SD1_CMD__UART1_DCE_RX		0x140>;
657	};
658
659	/* X61 */
660	pinctrl_uart2: uart2grp {
661		fsl,pins = <MX8MP_IOMUXC_SD1_DATA2__UART2_DCE_TX	0x140>,
662			   <MX8MP_IOMUXC_SD1_DATA3__UART2_DCE_RX	0x140>;
663	};
664
665	pinctrl_uart3: uart3grp {
666		fsl,pins = <MX8MP_IOMUXC_SD1_DATA6__UART3_DCE_TX	0x140>,
667			   <MX8MP_IOMUXC_SD1_DATA7__UART3_DCE_RX	0x140>;
668	};
669
670	pinctrl_uart4: uart4grp {
671		fsl,pins = <MX8MP_IOMUXC_UART4_RXD__UART4_DCE_RX	0x140>,
672			   <MX8MP_IOMUXC_UART4_TXD__UART4_DCE_TX	0x140>;
673	};
674
675	pinctrl_usdhc2: usdhc2grp {
676		fsl,pins = <MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x192>,
677			   <MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d2>,
678			   <MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d2>,
679			   <MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d2>,
680			   <MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d2>,
681			   <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d2>,
682			   <MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT	0xc0>;
683	};
684
685	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
686		fsl,pins = <MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x194>,
687			   <MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d4>,
688			   <MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d4>,
689			   <MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d4>,
690			   <MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d4>,
691			   <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d4>,
692			   <MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT	0xc0>;
693	};
694
695	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
696		fsl,pins = <MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x194>,
697			   <MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d4>,
698			   <MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d4>,
699			   <MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d4>,
700			   <MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d4>,
701			   <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d4>,
702			   <MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT	0xc0>;
703	};
704
705	pinctrl_usdhc2_gpio: usdhc2-gpiogrp {
706		fsl,pins = <MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12		0x1c0>;
707	};
708};
709