xref: /linux/arch/arm64/boot/dts/freescale/imx8mp-sr-som.dtsi (revision 4f38da1f027ea2c9f01bb71daa7a299c191b6940)

// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
 * Copyright 2025 Josua Mayer <josua@solid-run.com>
 */

#include "imx8mp.dtsi"

/ {
	model = "SolidRun i.MX8MP SoM";
	compatible = "solidrun,imx8mp-sr-som", "fsl,imx8mp";

	chosen {
		bootargs = "earlycon=ec_imx6q,0x30890000,115200";
		stdout-path = &uart2;
	};

	memory@40000000 {
		device_type = "memory";
		reg = <0x0 0x40000000 0 0xc0000000>,
		      <0x1 0x00000000 0 0xc0000000>;
	};

	usdhc1_pwrseq: usdhc1-pwrseq {
		compatible = "mmc-pwrseq-simple";
		reset-gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
	};

	v_1_8: regulator-1-8 {
		compatible = "regulator-fixed";
		regulator-name = "1v8";
		regulator-min-microvolt = <1800000>;
		regulator-max-microvolt = <1800000>;
	};

	v_3_3: regulator-3-3 {
		compatible = "regulator-fixed";
		regulator-name = "3v3";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
	};
};

/*
 * Reserve all physical memory from within the first 1GB of DDR address
 * space to avoid panic on low memory systems.
 */
&dsp_reserved {
	reg = <0 0x6f000000 0 0x1000000>;
};

&eqos {
	pinctrl-names = "default";
	pinctrl-0 = <&eqos_pins>, <&phy0_pins>;
	phy-mode = "rgmii-id";
	phy = <&phy0>;
	snps,force_thresh_dma_mode;
	snps,mtl-tx-config = <&mtl_tx_setup>;
	snps,mtl-rx-config = <&mtl_rx_setup>;
	status = "okay";

	mdio {
		compatible = "snps,dwmac-mdio";
		#address-cells = <1>;
		#size-cells = <0>;

		phy0: ethernet-phy@0 {
			compatible = "ethernet-phy-ieee802.3-c22";
			reg = <0>;
			reset-gpios = <&gpio4 19 GPIO_ACTIVE_LOW>;
			interrupt-parent = <&gpio4>;
			interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
		};
	};

	mtl_tx_setup: tx-queues-config {
		snps,tx-queues-to-use = <5>;

		queue0 {
			snps,dcb-algorithm;
			snps,priority = <0x1>;
		};

		queue1 {
			snps,dcb-algorithm;
			snps,priority = <0x2>;
		};

		queue2 {
			snps,dcb-algorithm;
			snps,priority = <0x4>;
		};

		queue3 {
			snps,dcb-algorithm;
			snps,priority = <0x8>;
		};

		queue4 {
			snps,dcb-algorithm;
			snps,priority = <0xf0>;
		};
	};

	mtl_rx_setup: rx-queues-config {
		snps,rx-queues-to-use = <5>;
		snps,rx-sched-sp;

		queue0 {
			snps,dcb-algorithm;
			snps,priority = <0x1>;
			snps,map-to-dma-channel = <0>;
		};

		queue1 {
			snps,dcb-algorithm;
			snps,priority = <0x2>;
			snps,map-to-dma-channel = <1>;
		};

		queue2 {
			snps,dcb-algorithm;
			snps,priority = <0x4>;
			snps,map-to-dma-channel = <2>;
		};

		queue3 {
			snps,dcb-algorithm;
			snps,priority = <0x8>;
			snps,map-to-dma-channel = <3>;
		};

		queue4 {
			snps,dcb-algorithm;
			snps,priority = <0xf0>;
			snps,map-to-dma-channel = <4>;
		};
	};
};

&fec {
	pinctrl-names = "default";
	pinctrl-0 = <&fec_pins>, <&phy1_pins>;
	phy-mode = "rgmii-id";
	phy = <&phy1>;
	fsl,magic-packet;
	status = "okay";

	mdio {
		#address-cells = <1>;
		#size-cells = <0>;

		phy1: ethernet-phy@1 {
			compatible = "ethernet-phy-ieee802.3-c22";
			reg = <0x1>;
			reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
			interrupt-parent = <&gpio4>;
			interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
		};
	};
};

&i2c1 {
	clock-frequency = <400000>;
	pinctrl-names = "default", "gpio";
	pinctrl-0 = <&i2c1_pins>;
	pinctrl-1 = <&i2c1_gpio_pins>;
	scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
	status = "okay";

	pmic: pmic@25 {
		compatible = "nxp,pca9450c";
		reg = <0x25>;
		pinctrl-0 = <&pmic_pins>;
		pinctrl-names = "default";
		interrupt-parent = <&gpio1>;
		interrupts = <3 GPIO_ACTIVE_LOW>;
		nxp,i2c-lt-enable;

		regulators {
			buck1: BUCK1 {
				regulator-name = "BUCK1";
				regulator-min-microvolt = <600000>;
				regulator-max-microvolt = <2187500>;
				regulator-boot-on;
				regulator-always-on;
				regulator-ramp-delay = <3125>;
			};

			buck2: BUCK2 {
				regulator-name = "BUCK2";
				regulator-min-microvolt = <600000>;
				regulator-max-microvolt = <2187500>;
				regulator-boot-on;
				regulator-always-on;
				regulator-ramp-delay = <3125>;
				nxp,dvs-run-voltage = <950000>;
				nxp,dvs-standby-voltage = <850000>;
			};

			buck4: BUCK4{
				regulator-name = "BUCK4";
				regulator-min-microvolt = <600000>;
				regulator-max-microvolt = <3400000>;
				regulator-boot-on;
				regulator-always-on;
			};

			buck5: BUCK5{
				regulator-name = "BUCK5";
				regulator-min-microvolt = <600000>;
				regulator-max-microvolt = <3400000>;
				regulator-boot-on;
				regulator-always-on;
			};

			buck6: BUCK6 {
				regulator-name = "BUCK6";
				regulator-min-microvolt = <600000>;
				regulator-max-microvolt = <3400000>;
				regulator-boot-on;
				regulator-always-on;
			};

			ldo1: LDO1 {
				regulator-name = "LDO1";
				regulator-min-microvolt = <1600000>;
				regulator-max-microvolt = <3300000>;
				regulator-boot-on;
				regulator-always-on;
			};

			ldo2: LDO2 {
				regulator-name = "LDO2";
				regulator-min-microvolt = <800000>;
				regulator-max-microvolt = <1150000>;
				regulator-boot-on;
				regulator-always-on;
			};

			ldo3: LDO3 {
				regulator-name = "LDO3";
				regulator-min-microvolt = <800000>;
				regulator-max-microvolt = <3300000>;
				regulator-boot-on;
				regulator-always-on;
			};

			ldo4: LDO4 {
				regulator-name = "LDO4";
				regulator-min-microvolt = <800000>;
				regulator-max-microvolt = <3300000>;
				regulator-boot-on;
				regulator-always-on;
			};

			ldo5: LDO5 {
				regulator-name = "LDO5";
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <3300000>;
				regulator-boot-on;
				regulator-always-on;
			};
		};
	};

	som_eeprom: eeprom@50{
		compatible = "st,24c01", "atmel,24c01";
		reg = <0x50>;
		pagesize = <16>;
	};
};

&i2c2 {
	clock-frequency = <100000>;
	pinctrl-names = "default", "gpio";
	pinctrl-0 = <&i2c2_pins>;
	pinctrl-1 = <&i2c2_gpio_pins>;
	scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
	sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
	status = "okay";
};

&i2c3 {
	clock-frequency = <100000>;
	pinctrl-names = "default", "gpio";
	pinctrl-0 = <&i2c3_pins>;
	pinctrl-1 = <&i2c3_gpio_pins>;
	scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
	sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
	status = "okay";
};

&i2c4 {
	/* routed to basler camera connector */
	clock-frequency = <100000>;
	pinctrl-names = "default", "gpio";
	pinctrl-0 = <&i2c4_pins>;
	pinctrl-1 = <&i2c4_gpio_pins>;
	scl-gpios = <&gpio5 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
	sda-gpios = <&gpio5 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
	status = "okay";
};

&iomuxc {
	eqos_pins: pinctrl-eqos-grp {
		fsl,pins = <
			MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC		0x3
			MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO		0x3
			MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0	0x91
			MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1	0x91
			MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2	0x91
			MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3	0x91
			MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x91
			MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL	0x91
			MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0	0x1f
			MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1	0x1f
			MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2	0x1f
			MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3	0x1f
			MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL	0x1f
			MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x1f
		>;
	};

	fec_pins: pinctrl-fec-grp {
		fsl,pins = <
			MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC		0x3
			MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO		0x3
			MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0		0x91
			MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1		0x91
			MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2		0x91
			MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3		0x91
			MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC		0x91
			MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL	0x91
			MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0		0x1f
			MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1		0x1f
			MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2		0x1f
			MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3		0x1f
			MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL	0x1f
			MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC		0x1f
		>;
	};

	i2c1_pins: pinctrl-i2c1-grp {
		fsl,pins = <
			MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL			0x400001c3
			MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA			0x400001c3
		>;
	};

	i2c1_gpio_pins: pinctrl-i2c1-gpio-grp {
		fsl,pins = <
			MX8MP_IOMUXC_I2C1_SCL__GPIO5_IO14		0x400001c3
			MX8MP_IOMUXC_I2C1_SDA__GPIO5_IO15		0x400001c3
		>;
	};

	i2c2_pins: pinctrl-i2c2-grp {
		fsl,pins = <
			MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL			0x400001c3
			MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA			0x400001c3
		>;
	};

	i2c2_gpio_pins: pinctrl-i2c2-gpio-grp {
		fsl,pins = <
			MX8MP_IOMUXC_I2C2_SCL__GPIO5_IO16		0x400001c3
			MX8MP_IOMUXC_I2C2_SDA__GPIO5_IO17		0x400001c3
		>;
	};

	i2c3_pins: pinctrl-i2c3-grp {
		fsl,pins = <
			MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL			0x400001c3
			MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA			0x400001c3
		>;
	};

	i2c3_gpio_pins: pinctrl-i2c3-gpio-grp {
		fsl,pins = <
			MX8MP_IOMUXC_I2C3_SCL__GPIO5_IO18		0x400001c3
			MX8MP_IOMUXC_I2C3_SDA__GPIO5_IO19		0x400001c3
		>;
	};

	i2c4_pins: pinctrl-i2c4-grp {
		fsl,pins = <
			MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL			0x400001c3
			MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA			0x400001c3
		>;
	};

	i2c4_gpio_pins: pinctrl-i2c4-gpio-grp {
		fsl,pins = <
			MX8MP_IOMUXC_I2C4_SCL__GPIO5_IO20			0x400001c3
			MX8MP_IOMUXC_I2C4_SDA__GPIO5_IO21			0x400001c3
		>;
	};

	phy0_pins: pinctrl-phy0-grp {
		fsl,pins = <
			/* RESET_N: weak i/o, open drain, external 1k pull-up */
			MX8MP_IOMUXC_SAI1_TXD7__GPIO4_IO19		0x20
			/* INT_N: weak i/o, open drain, internal pull-up */
			MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18		0x160
		>;
	};

	phy1_pins: pinctrl-phy-1-grp {
		fsl,pins = <
			/* RESET_N: weak i/o, open drain, external 1k pull-up */
			MX8MP_IOMUXC_SAI1_RXD0__GPIO4_IO02		0x20
			/* INT_N: weak i/o, open drain, internal pull-up */
			MX8MP_IOMUXC_SAI1_RXD1__GPIO4_IO03		0x160
		>;
	};

	pmic_pins: pinctrl-pmic-grp {
		fsl,pins = <
			MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03		0x41
		>;
	};

	uart1_pins: pinctrl-uart1-grp {
		fsl,pins = <
			MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX		0x140
			MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX		0x140
			MX8MP_IOMUXC_UART3_RXD__UART1_DCE_CTS		0x140
			MX8MP_IOMUXC_UART3_TXD__UART1_DCE_RTS		0x140
			/* BT_REG_ON */
			MX8MP_IOMUXC_SD1_RESET_B__GPIO2_IO10		0x0
			/* BT_WAKE_DEV */
			MX8MP_IOMUXC_SD1_DATA5__GPIO2_IO07		0x0
			/* BT_WAKE_HOST */
			MX8MP_IOMUXC_SD1_DATA6__GPIO2_IO08		0x100
		>;
	};

	uart2_pins: pinctrl-uart2-grp {
		fsl,pins = <
			MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX		0x49
			MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX		0x49
		>;
	};

	usdhc1_pins: pinctrl-usdhc1-grp {
		fsl,pins = <
			MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK		0x190
			MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD		0x1d0
			MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0		0x1d0
			MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1		0x1d0
			MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2		0x1d0
			MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3		0x1d0
			/* WL_REG_ON */
			MX8MP_IOMUXC_SD1_STROBE__GPIO2_IO11		0x0
			/* WL_WAKE_HOST */
			MX8MP_IOMUXC_SD1_DATA7__GPIO2_IO09		0x100
		>;
	};

	usdhc1_100mhz_pins: pinctrl-usdhc1g-100mhz-grp {
		fsl,pins = <
			MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK		0x194
			MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD		0x1d4
			MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0		0x1d4
			MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1		0x1d4
			MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2		0x1d4
			MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3		0x1d4
		>;
	};

	usdhc1_200mhz_pins: pinctrl-usdhc1-200mhz-grp {
		fsl,pins = <
			MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK		0x196
			MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD		0x1d6
			MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0		0x1d6
			MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1		0x1d6
			MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2		0x1d6
			MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3		0x1d6
		>;
	};

	usdhc3_pins: pinctrl-usdhc3-grp {
		fsl,pins = <
			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK		0x190
			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD		0x1d0
			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0		0x1d0
			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1		0x1d0
			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2		0x1d0
			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3		0x1d0
			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4		0x1d0
			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5		0x1d0
			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6		0x1d0
			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7		0x1d0
			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE		0x190
		>;
	};

	usdhc3_100mhz_pins: pinctrl-usdhc3-100mhz-grp {
		fsl,pins = <
			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK		0x194
			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD		0x1d4
			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0		0x1d4
			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1		0x1d4
			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2		0x1d4
			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3		0x1d4
			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4		0x1d4
			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5		0x1d4
			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6		0x1d4
			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7		0x1d4
			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE		0x194
		>;
	};

	usdhc3_200mhz_pins: pinctrl-usdhc3-200mhz-grp {
		fsl,pins = <
			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK		0x196
			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD		0x1d6
			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0		0x1d6
			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1		0x1d6
			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2		0x1d6
			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3		0x1d6
			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4		0x1d6
			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5		0x1d6
			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6		0x1d6
			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7		0x1d6
			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE		0x196
		>;
	};

	wdog1_pins: pinctrl-wdog1-grp {
		fsl,pins = <
			MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B		0x140
		>;
	};
};

&uart1 {
	pinctrl-names = "default";
	pinctrl-0 = <&uart1_pins>;
	uart-has-rtscts;
	/* select 80MHz parent clock to support maximum baudrate 4Mbps */
	assigned-clocks = <&clk IMX8MP_CLK_UART1>;
	assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_80M>;
	status = "okay";

	bluetooth {
		compatible = "brcm,bcm4345c5";
		device-wakeup-gpios = <&gpio2 7 GPIO_ACTIVE_HIGH>;
		host-wakeup-gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>;
		shutdown-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
		/* Murata 1MW module supports max. 3M baud */
		max-speed = <3000000>;
	};
};

&uart2 {
	pinctrl-names = "default";
	pinctrl-0 = <&uart2_pins>;
	status = "okay";
};

&usdhc1 {
	pinctrl-names = "default";
	pinctrl-0 = <&usdhc1_pins>;
	pinctrl-1 = <&usdhc1_100mhz_pins>;
	pinctrl-2 = <&usdhc1_200mhz_pins>;
	vmmc-supply = <&v_3_3>;
	vqmmc-supply = <&v_1_8>;
	bus-width = <4>;
	mmc-pwrseq = <&usdhc1_pwrseq>;
	status = "okay";
};

&usdhc3 {
	pinctrl-names = "default", "state_100mhz", "state_200mhz";
	pinctrl-0 = <&usdhc3_pins>;
	pinctrl-1 = <&usdhc3_100mhz_pins>;
	pinctrl-2 = <&usdhc3_200mhz_pins>;
	vmmc-supply = <&v_3_3>;
	vqmmc-supply = <&v_1_8>;
	bus-width = <8>;
	non-removable;
	status = "okay";
};

&wdog1 {
	pinctrl-names = "default";
	pinctrl-0 = <&wdog1_pins>;
	status = "okay";
};