xref: /linux/arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts (revision 24168c5e6dfbdd5b414f048f47f75d64533296ca)
1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2/*
3 * Copyright 2019 NXP
4 * Copyright 2022 Ideas on Board Oy
5 */
6
7/dts-v1/;
8
9#include <dt-bindings/gpio/gpio.h>
10#include <dt-bindings/leds/common.h>
11#include <dt-bindings/usb/pd.h>
12
13#include "imx8mp.dtsi"
14
15/ {
16	model = "Polyhex Debix Model A i.MX8MPlus board";
17	compatible = "polyhex,imx8mp-debix-model-a", "polyhex,imx8mp-debix", "fsl,imx8mp";
18
19	chosen {
20		stdout-path = &uart2;
21	};
22
23	leds {
24		compatible = "gpio-leds";
25		pinctrl-names = "default";
26		pinctrl-0 = <&pinctrl_gpio_led>;
27
28		led-0 {
29			function = LED_FUNCTION_POWER;
30			color = <LED_COLOR_ID_RED>;
31			gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>;
32			default-state = "on";
33		};
34	};
35
36	reg_usdhc2_vmmc: regulator-usdhc2 {
37		compatible = "regulator-fixed";
38		pinctrl-names = "default";
39		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
40		regulator-name = "VSD_3V3";
41		regulator-min-microvolt = <3300000>;
42		regulator-max-microvolt = <3300000>;
43		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
44		enable-active-high;
45	};
46
47	reg_usb_hub: regulator-usb-hub {
48		compatible = "regulator-fixed";
49		pinctrl-names = "default";
50		pinctrl-0 = <&pinctrl_reg_usb_hub>;
51		regulator-name = "USB_HUB";
52		regulator-min-microvolt = <5000000>;
53		regulator-max-microvolt = <5000000>;
54		gpio = <&gpio4 26 GPIO_ACTIVE_HIGH>;
55		enable-active-high;
56	};
57};
58
59&A53_0 {
60	cpu-supply = <&buck2>;
61};
62
63&A53_1 {
64	cpu-supply = <&buck2>;
65};
66
67&A53_2 {
68	cpu-supply = <&buck2>;
69};
70
71&A53_3 {
72	cpu-supply = <&buck2>;
73};
74
75&eqos {
76	pinctrl-names = "default";
77	pinctrl-0 = <&pinctrl_eqos>;
78	phy-mode = "rgmii-id";
79	phy-handle = <&ethphy0>;
80	status = "okay";
81
82	mdio {
83		compatible = "snps,dwmac-mdio";
84		#address-cells = <1>;
85		#size-cells = <0>;
86
87		ethphy0: ethernet-phy@0 { /* RTL8211E */
88			compatible = "ethernet-phy-ieee802.3-c22";
89			reg = <0>;
90			reset-gpios = <&gpio4 18 GPIO_ACTIVE_LOW>;
91			reset-assert-us = <20>;
92			reset-deassert-us = <200000>;
93		};
94	};
95};
96
97&i2c1 {
98	clock-frequency = <400000>;
99	pinctrl-names = "default";
100	pinctrl-0 = <&pinctrl_i2c1>;
101	status = "okay";
102
103	pmic@25 {
104		compatible = "nxp,pca9450c";
105		reg = <0x25>;
106		pinctrl-names = "default";
107		pinctrl-0 = <&pinctrl_pmic>;
108		interrupt-parent = <&gpio1>;
109		interrupts = <3 IRQ_TYPE_EDGE_RISING>;
110
111		regulators {
112			buck1: BUCK1 {
113				regulator-name = "BUCK1";
114				regulator-min-microvolt = <600000>;
115				regulator-max-microvolt = <2187500>;
116				regulator-boot-on;
117				regulator-always-on;
118				regulator-ramp-delay = <3125>;
119			};
120
121			buck2: BUCK2 {
122				regulator-name = "BUCK2";
123				regulator-min-microvolt = <600000>;
124				regulator-max-microvolt = <2187500>;
125				regulator-boot-on;
126				regulator-always-on;
127				regulator-ramp-delay = <3125>;
128				nxp,dvs-run-voltage = <950000>;
129				nxp,dvs-standby-voltage = <850000>;
130			};
131
132			buck4: BUCK4 {
133				regulator-name = "BUCK4";
134				regulator-min-microvolt = <600000>;
135				regulator-max-microvolt = <3400000>;
136				regulator-boot-on;
137				regulator-always-on;
138			};
139
140			buck5: BUCK5 {
141				regulator-name = "BUCK5";
142				regulator-min-microvolt = <600000>;
143				regulator-max-microvolt = <3400000>;
144				regulator-boot-on;
145				regulator-always-on;
146			};
147
148			buck6: BUCK6 {
149				regulator-name = "BUCK6";
150				regulator-min-microvolt = <600000>;
151				regulator-max-microvolt = <3400000>;
152				regulator-boot-on;
153				regulator-always-on;
154			};
155
156			ldo1: LDO1 {
157				regulator-name = "LDO1";
158				regulator-min-microvolt = <1600000>;
159				regulator-max-microvolt = <3300000>;
160				regulator-boot-on;
161				regulator-always-on;
162			};
163
164			ldo2: LDO2 {
165				regulator-name = "LDO2";
166				regulator-min-microvolt = <800000>;
167				regulator-max-microvolt = <1150000>;
168				regulator-boot-on;
169				regulator-always-on;
170			};
171
172			ldo3: LDO3 {
173				regulator-name = "LDO3";
174				regulator-min-microvolt = <800000>;
175				regulator-max-microvolt = <3300000>;
176				regulator-boot-on;
177				regulator-always-on;
178			};
179
180			ldo4: LDO4 {
181				regulator-name = "LDO4";
182				regulator-min-microvolt = <800000>;
183				regulator-max-microvolt = <3300000>;
184				regulator-boot-on;
185				regulator-always-on;
186			};
187
188			ldo5: LDO5 {
189				regulator-name = "LDO5";
190				regulator-min-microvolt = <1800000>;
191				regulator-max-microvolt = <3300000>;
192				regulator-boot-on;
193				regulator-always-on;
194			};
195		};
196	};
197};
198
199&i2c2 {
200	pinctrl-names = "default";
201	pinctrl-0 = <&pinctrl_i2c2>;
202};
203
204&i2c3 {
205	clock-frequency = <400000>;
206	pinctrl-names = "default";
207	pinctrl-0 = <&pinctrl_i2c3>;
208	status = "okay";
209};
210
211&i2c4 {
212	clock-frequency = <100000>;
213	pinctrl-names = "default";
214	pinctrl-0 = <&pinctrl_i2c4>;
215	status = "okay";
216
217	eeprom@50 {
218		compatible = "atmel,24c02";
219		reg = <0x50>;
220		pagesize = <16>;
221	};
222
223	rtc@51 {
224		compatible = "haoyu,hym8563";
225		reg = <0x51>;
226		#clock-cells = <0>;
227		clock-output-names = "xin32k";
228		interrupt-parent = <&gpio2>;
229		interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
230		pinctrl-names = "default";
231		pinctrl-0 = <&pinctrl_rtc_int>;
232	};
233};
234
235&i2c6 {
236	clock-frequency = <400000>;
237	pinctrl-names = "default";
238	pinctrl-0 = <&pinctrl_i2c6>;
239	status = "okay";
240};
241
242&snvs_pwrkey {
243	status = "okay";
244};
245
246&uart2 {
247	/* console */
248	pinctrl-names = "default";
249	pinctrl-0 = <&pinctrl_uart2>;
250	status = "okay";
251};
252
253&uart3 {
254	pinctrl-names = "default";
255	pinctrl-0 = <&pinctrl_uart3>;
256	status = "okay";
257};
258
259&uart4 {
260	pinctrl-names = "default";
261	pinctrl-0 = <&pinctrl_uart4>;
262	status = "okay";
263};
264
265&usb3_phy1 {
266	status = "okay";
267};
268
269&usb3_1 {
270	status = "okay";
271};
272
273&usb_dwc3_1 {
274	#address-cells = <1>;
275	#size-cells = <0>;
276	pinctrl-names = "default";
277	pinctrl-0 = <&pinctrl_usb1>;
278	dr_mode = "host";
279	status = "okay";
280
281	/* 2.x hub on port 1 */
282	usb_hub_2_x: hub@1 {
283		compatible = "usbbda,5411";
284		reg = <1>;
285		vdd-supply = <&reg_usb_hub>;
286		peer-hub = <&usb_hub_3_x>;
287	};
288
289	/* 3.x hub on port 2 */
290	usb_hub_3_x: hub@2 {
291		compatible = "usbbda,411";
292		reg = <2>;
293		vdd-supply = <&reg_usb_hub>;
294		peer-hub = <&usb_hub_2_x>;
295	};
296};
297
298/* SD Card */
299&usdhc2 {
300	pinctrl-names = "default", "state_100mhz", "state_200mhz";
301	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
302	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
303	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
304	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
305	vmmc-supply = <&reg_usdhc2_vmmc>;
306	bus-width = <4>;
307	status = "okay";
308};
309
310/* eMMC */
311&usdhc3 {
312	assigned-clocks = <&clk IMX8MP_CLK_USDHC3>;
313	assigned-clock-rates = <400000000>;
314	pinctrl-names = "default", "state_100mhz", "state_200mhz";
315	pinctrl-0 = <&pinctrl_usdhc3>;
316	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
317	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
318	bus-width = <8>;
319	non-removable;
320	status = "okay";
321};
322
323&wdog1 {
324	pinctrl-names = "default";
325	pinctrl-0 = <&pinctrl_wdog>;
326	fsl,ext-reset-output;
327	status = "okay";
328};
329
330&iomuxc {
331	pinctrl_eqos: eqosgrp {
332		fsl,pins = <
333			MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC				0x3
334			MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO				0x3
335			MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0			0x91
336			MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1			0x91
337			MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2			0x91
338			MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3			0x91
339			MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x91
340			MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL			0x91
341			MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0			0x1f
342			MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1			0x1f
343			MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2			0x1f
344			MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3			0x1f
345			MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL			0x1f
346			MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x1f
347			MX8MP_IOMUXC_SAI1_RXFS__ENET1_1588_EVENT0_IN			0x1f
348			MX8MP_IOMUXC_SAI1_RXC__ENET1_1588_EVENT0_OUT			0x1f
349			MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18				0x19
350		>;
351	};
352
353	pinctrl_gpio_led: gpioledgrp {
354		fsl,pins = <
355			MX8MP_IOMUXC_NAND_READY_B__GPIO3_IO16				0x19
356		>;
357	};
358
359	pinctrl_i2c1: i2c1grp {
360		fsl,pins = <
361			MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL					0x400001c2
362			MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA					0x400001c2
363		>;
364	};
365
366	pinctrl_i2c2: i2c2grp {
367		fsl,pins = <
368			MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL					0x400001c2
369			MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA					0x400001c2
370		>;
371	};
372
373	pinctrl_i2c3: i2c3grp {
374		fsl,pins = <
375			MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL					0x400001c2
376			MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA					0x400001c2
377		>;
378	};
379
380	pinctrl_i2c4: i2c4grp {
381		fsl,pins = <
382			MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL					0x400001c3
383			MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA					0x400001c3
384		>;
385	};
386
387	pinctrl_i2c6: i2c6grp {
388		fsl,pins = <
389			MX8MP_IOMUXC_SAI5_RXFS__I2C6_SCL				0x400001c3
390			MX8MP_IOMUXC_SAI5_RXC__I2C6_SDA					0x400001c3
391		>;
392	};
393
394	pinctrl_pmic: pmicirqgrp {
395		fsl,pins = <
396			MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03				0x41
397		>;
398	};
399
400	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
401		fsl,pins = <
402			MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19				0x41
403		>;
404	};
405
406	pinctrl_reg_usb_hub: regusbhubgrp {
407		fsl,pins = <
408			MX8MP_IOMUXC_SAI2_TXD0__GPIO4_IO26				0x19
409		>;
410	};
411
412	pinctrl_rtc_int: rtcintgrp {
413		fsl,pins = <
414			MX8MP_IOMUXC_SD1_STROBE__GPIO2_IO11				0x140
415		>;
416	};
417
418	pinctrl_uart2: uart2grp {
419		fsl,pins = <
420			MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX				0x14f
421			MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX				0x14f
422		>;
423	};
424
425	pinctrl_uart3: uart3grp {
426		fsl,pins = <
427			MX8MP_IOMUXC_UART3_RXD__UART3_DCE_RX				0x49
428			MX8MP_IOMUXC_UART3_TXD__UART3_DCE_TX				0x49
429		>;
430	};
431
432	pinctrl_uart4: uart4grp {
433		fsl,pins = <
434			MX8MP_IOMUXC_UART4_RXD__UART4_DCE_RX				0x49
435			MX8MP_IOMUXC_UART4_TXD__UART4_DCE_TX				0x49
436		>;
437	};
438
439	pinctrl_usb1: usb1grp {
440		fsl,pins = <
441			MX8MP_IOMUXC_GPIO1_IO14__USB2_OTG_PWR				0x10
442		>;
443	};
444
445	pinctrl_usdhc2: usdhc2grp {
446		fsl,pins = <
447			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK				0x190
448			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD				0x1d0
449			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0				0x1d0
450			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1				0x1d0
451			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2				0x1d0
452			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3				0x1d0
453		>;
454	};
455
456	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
457		fsl,pins = <
458			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK				0x194
459			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD				0x1d4
460			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0				0x1d4
461			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1				0x1d4
462			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2				0x1d4
463			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3				0x1d4
464		>;
465	};
466
467	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
468		fsl,pins = <
469			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK				0x196
470			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD				0x1d6
471			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0				0x1d6
472			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1				0x1d6
473			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2				0x1d6
474			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3				0x1d6
475		>;
476	};
477
478	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
479		fsl,pins = <
480			MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12				0x1c4
481		>;
482	};
483
484	pinctrl_usdhc3: usdhc3grp {
485		fsl,pins = <
486			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK				0x190
487			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD				0x1d0
488			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0				0x1d0
489			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1				0x1d0
490			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2				0x1d0
491			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3				0x1d0
492			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4				0x1d0
493			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5				0x1d0
494			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6				0x1d0
495			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7				0x1d0
496			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE				0x190
497		>;
498	};
499
500	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
501		fsl,pins = <
502			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK				0x194
503			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD				0x1d4
504			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0				0x1d4
505			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1				0x1d4
506			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2				0x1d4
507			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3				0x1d4
508			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4				0x1d4
509			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5				0x1d4
510			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6				0x1d4
511			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7				0x1d4
512			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE				0x194
513		>;
514	};
515
516	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
517		fsl,pins = <
518			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK				0x196
519			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD				0x1d6
520			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0				0x1d6
521			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1				0x1d6
522			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2				0x1d6
523			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3				0x1d6
524			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4				0x1d6
525			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5				0x1d6
526			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6				0x1d6
527			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7				0x1d6
528			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE				0x196
529		>;
530	};
531
532	pinctrl_wdog: wdoggrp {
533		fsl,pins = <
534			MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B				0xc6
535		>;
536	};
537};
538