xref: /linux/arch/arm64/boot/dts/freescale/imx8mn.dtsi (revision 4b132aacb0768ac1e652cf517097ea6f237214b9)
1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2/*
3 * Copyright 2019 NXP
4 */
5
6#include <dt-bindings/clock/imx8mn-clock.h>
7#include <dt-bindings/power/imx8mn-power.h>
8#include <dt-bindings/reset/imx8mq-reset.h>
9#include <dt-bindings/gpio/gpio.h>
10#include <dt-bindings/input/input.h>
11#include <dt-bindings/interrupt-controller/arm-gic.h>
12#include <dt-bindings/thermal/thermal.h>
13
14#include "imx8mn-pinfunc.h"
15
16/ {
17	interrupt-parent = <&gic>;
18	#address-cells = <2>;
19	#size-cells = <2>;
20
21	aliases {
22		ethernet0 = &fec1;
23		gpio0 = &gpio1;
24		gpio1 = &gpio2;
25		gpio2 = &gpio3;
26		gpio3 = &gpio4;
27		gpio4 = &gpio5;
28		i2c0 = &i2c1;
29		i2c1 = &i2c2;
30		i2c2 = &i2c3;
31		i2c3 = &i2c4;
32		mmc0 = &usdhc1;
33		mmc1 = &usdhc2;
34		mmc2 = &usdhc3;
35		serial0 = &uart1;
36		serial1 = &uart2;
37		serial2 = &uart3;
38		serial3 = &uart4;
39		spi0 = &ecspi1;
40		spi1 = &ecspi2;
41		spi2 = &ecspi3;
42	};
43
44	cpus {
45		#address-cells = <1>;
46		#size-cells = <0>;
47
48		idle-states {
49			entry-method = "psci";
50
51			cpu_pd_wait: cpu-pd-wait {
52				compatible = "arm,idle-state";
53				arm,psci-suspend-param = <0x0010033>;
54				local-timer-stop;
55				entry-latency-us = <1000>;
56				exit-latency-us = <700>;
57				min-residency-us = <2700>;
58			};
59		};
60
61		A53_0: cpu@0 {
62			device_type = "cpu";
63			compatible = "arm,cortex-a53";
64			reg = <0x0>;
65			clock-latency = <61036>;
66			clocks = <&clk IMX8MN_CLK_ARM>;
67			enable-method = "psci";
68			i-cache-size = <0x8000>;
69			i-cache-line-size = <64>;
70			i-cache-sets = <256>;
71			d-cache-size = <0x8000>;
72			d-cache-line-size = <64>;
73			d-cache-sets = <128>;
74			next-level-cache = <&A53_L2>;
75			operating-points-v2 = <&a53_opp_table>;
76			nvmem-cells = <&cpu_speed_grade>;
77			nvmem-cell-names = "speed_grade";
78			cpu-idle-states = <&cpu_pd_wait>;
79			#cooling-cells = <2>;
80		};
81
82		A53_1: cpu@1 {
83			device_type = "cpu";
84			compatible = "arm,cortex-a53";
85			reg = <0x1>;
86			clock-latency = <61036>;
87			clocks = <&clk IMX8MN_CLK_ARM>;
88			enable-method = "psci";
89			i-cache-size = <0x8000>;
90			i-cache-line-size = <64>;
91			i-cache-sets = <256>;
92			d-cache-size = <0x8000>;
93			d-cache-line-size = <64>;
94			d-cache-sets = <128>;
95			next-level-cache = <&A53_L2>;
96			operating-points-v2 = <&a53_opp_table>;
97			cpu-idle-states = <&cpu_pd_wait>;
98			#cooling-cells = <2>;
99		};
100
101		A53_2: cpu@2 {
102			device_type = "cpu";
103			compatible = "arm,cortex-a53";
104			reg = <0x2>;
105			clock-latency = <61036>;
106			clocks = <&clk IMX8MN_CLK_ARM>;
107			enable-method = "psci";
108			i-cache-size = <0x8000>;
109			i-cache-line-size = <64>;
110			i-cache-sets = <256>;
111			d-cache-size = <0x8000>;
112			d-cache-line-size = <64>;
113			d-cache-sets = <128>;
114			next-level-cache = <&A53_L2>;
115			operating-points-v2 = <&a53_opp_table>;
116			cpu-idle-states = <&cpu_pd_wait>;
117			#cooling-cells = <2>;
118		};
119
120		A53_3: cpu@3 {
121			device_type = "cpu";
122			compatible = "arm,cortex-a53";
123			reg = <0x3>;
124			clock-latency = <61036>;
125			clocks = <&clk IMX8MN_CLK_ARM>;
126			enable-method = "psci";
127			i-cache-size = <0x8000>;
128			i-cache-line-size = <64>;
129			i-cache-sets = <256>;
130			d-cache-size = <0x8000>;
131			d-cache-line-size = <64>;
132			d-cache-sets = <128>;
133			next-level-cache = <&A53_L2>;
134			operating-points-v2 = <&a53_opp_table>;
135			cpu-idle-states = <&cpu_pd_wait>;
136			#cooling-cells = <2>;
137		};
138
139		A53_L2: l2-cache0 {
140			compatible = "cache";
141			cache-level = <2>;
142			cache-unified;
143			cache-size = <0x80000>;
144			cache-line-size = <64>;
145			cache-sets = <512>;
146		};
147	};
148
149	a53_opp_table: opp-table {
150		compatible = "operating-points-v2";
151		opp-shared;
152
153		opp-1200000000 {
154			opp-hz = /bits/ 64 <1200000000>;
155			opp-microvolt = <850000>;
156			opp-supported-hw = <0xb00>, <0x7>;
157			clock-latency-ns = <150000>;
158			opp-suspend;
159		};
160
161		opp-1400000000 {
162			opp-hz = /bits/ 64 <1400000000>;
163			opp-microvolt = <950000>;
164			opp-supported-hw = <0x300>, <0x7>;
165			clock-latency-ns = <150000>;
166			opp-suspend;
167		};
168
169		opp-1500000000 {
170			opp-hz = /bits/ 64 <1500000000>;
171			opp-microvolt = <1000000>;
172			opp-supported-hw = <0x100>, <0x3>;
173			clock-latency-ns = <150000>;
174			opp-suspend;
175		};
176	};
177
178	osc_32k: clock-osc-32k {
179		compatible = "fixed-clock";
180		#clock-cells = <0>;
181		clock-frequency = <32768>;
182		clock-output-names = "osc_32k";
183	};
184
185	osc_24m: clock-osc-24m {
186		compatible = "fixed-clock";
187		#clock-cells = <0>;
188		clock-frequency = <24000000>;
189		clock-output-names = "osc_24m";
190	};
191
192	clk_ext1: clock-ext1 {
193		compatible = "fixed-clock";
194		#clock-cells = <0>;
195		clock-frequency = <133000000>;
196		clock-output-names = "clk_ext1";
197	};
198
199	clk_ext2: clock-ext2 {
200		compatible = "fixed-clock";
201		#clock-cells = <0>;
202		clock-frequency = <133000000>;
203		clock-output-names = "clk_ext2";
204	};
205
206	clk_ext3: clock-ext3 {
207		compatible = "fixed-clock";
208		#clock-cells = <0>;
209		clock-frequency = <133000000>;
210		clock-output-names = "clk_ext3";
211	};
212
213	clk_ext4: clock-ext4 {
214		compatible = "fixed-clock";
215		#clock-cells = <0>;
216		clock-frequency = <133000000>;
217		clock-output-names = "clk_ext4";
218	};
219
220	pmu {
221		compatible = "arm,cortex-a53-pmu";
222		interrupts = <GIC_PPI 7
223			     (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
224	};
225
226	psci {
227		compatible = "arm,psci-1.0";
228		method = "smc";
229	};
230
231	thermal-zones {
232		cpu-thermal {
233			polling-delay-passive = <250>;
234			polling-delay = <2000>;
235			thermal-sensors = <&tmu>;
236			trips {
237				cpu_alert0: trip0 {
238					temperature = <85000>;
239					hysteresis = <2000>;
240					type = "passive";
241				};
242
243				cpu_crit0: trip1 {
244					temperature = <95000>;
245					hysteresis = <2000>;
246					type = "critical";
247				};
248			};
249
250			cooling-maps {
251				map0 {
252					trip = <&cpu_alert0>;
253					cooling-device =
254						<&A53_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
255						<&A53_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
256						<&A53_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
257						<&A53_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
258				};
259			};
260		};
261	};
262
263	timer {
264		compatible = "arm,armv8-timer";
265		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
266			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
267			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
268			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
269		clock-frequency = <8000000>;
270		arm,no-tick-in-suspend;
271	};
272
273	soc: soc@0 {
274		compatible = "fsl,imx8mn-soc", "simple-bus";
275		#address-cells = <1>;
276		#size-cells = <1>;
277		ranges = <0x0 0x0 0x0 0x3e000000>;
278		dma-ranges = <0x40000000 0x0 0x40000000 0xc0000000>;
279		nvmem-cells = <&imx8mn_uid>;
280		nvmem-cell-names = "soc_unique_id";
281
282		aips1: bus@30000000 {
283			compatible = "fsl,aips-bus", "simple-bus";
284			reg = <0x30000000 0x400000>;
285			#address-cells = <1>;
286			#size-cells = <1>;
287			ranges;
288
289			spba2: spba-bus@30000000 {
290				compatible = "fsl,spba-bus", "simple-bus";
291				#address-cells = <1>;
292				#size-cells = <1>;
293				reg = <0x30000000 0x100000>;
294				ranges;
295
296				sai2: sai@30020000 {
297					compatible = "fsl,imx8mn-sai", "fsl,imx8mq-sai";
298					reg = <0x30020000 0x10000>;
299					#sound-dai-cells = <0>;
300					interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
301					clocks = <&clk IMX8MN_CLK_SAI2_IPG>,
302						<&clk IMX8MN_CLK_DUMMY>,
303						<&clk IMX8MN_CLK_SAI2_ROOT>,
304						<&clk IMX8MN_CLK_DUMMY>, <&clk IMX8MN_CLK_DUMMY>;
305					clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
306					dmas = <&sdma2 2 2 0>, <&sdma2 3 2 0>;
307					dma-names = "rx", "tx";
308					status = "disabled";
309				};
310
311				sai3: sai@30030000 {
312					compatible = "fsl,imx8mn-sai", "fsl,imx8mq-sai";
313					reg = <0x30030000 0x10000>;
314					#sound-dai-cells = <0>;
315					interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
316					clocks = <&clk IMX8MN_CLK_SAI3_IPG>,
317						 <&clk IMX8MN_CLK_DUMMY>,
318						 <&clk IMX8MN_CLK_SAI3_ROOT>,
319						 <&clk IMX8MN_CLK_DUMMY>, <&clk IMX8MN_CLK_DUMMY>;
320					clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
321					dmas = <&sdma2 4 2 0>, <&sdma2 5 2 0>;
322					dma-names = "rx", "tx";
323					status = "disabled";
324				};
325
326				sai5: sai@30050000 {
327					compatible = "fsl,imx8mn-sai", "fsl,imx8mq-sai";
328					reg = <0x30050000 0x10000>;
329					#sound-dai-cells = <0>;
330					interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
331					clocks = <&clk IMX8MN_CLK_SAI5_IPG>,
332						 <&clk IMX8MN_CLK_DUMMY>,
333						 <&clk IMX8MN_CLK_SAI5_ROOT>,
334						 <&clk IMX8MN_CLK_DUMMY>, <&clk IMX8MN_CLK_DUMMY>;
335					clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
336					dmas = <&sdma2 8 2 0>, <&sdma2 9 2 0>;
337					dma-names = "rx", "tx";
338					fsl,shared-interrupt;
339					fsl,dataline = <0 0xf 0xf>;
340					status = "disabled";
341				};
342
343				sai6: sai@30060000 {
344					compatible = "fsl,imx8mn-sai", "fsl,imx8mq-sai";
345					reg = <0x30060000  0x10000>;
346					#sound-dai-cells = <0>;
347					interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
348					clocks = <&clk IMX8MN_CLK_SAI6_IPG>,
349						 <&clk IMX8MN_CLK_DUMMY>,
350						 <&clk IMX8MN_CLK_SAI6_ROOT>,
351						 <&clk IMX8MN_CLK_DUMMY>, <&clk IMX8MN_CLK_DUMMY>;
352					clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
353					dmas = <&sdma2 10 2 0>, <&sdma2 11 2 0>;
354					dma-names = "rx", "tx";
355					status = "disabled";
356				};
357
358				micfil: audio-controller@30080000 {
359					compatible = "fsl,imx8mm-micfil";
360					reg = <0x30080000 0x10000>;
361					interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
362						     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
363						     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
364						     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
365					clocks = <&clk IMX8MN_CLK_PDM_IPG>,
366						 <&clk IMX8MN_CLK_PDM_ROOT>,
367						 <&clk IMX8MN_AUDIO_PLL1_OUT>,
368						 <&clk IMX8MN_AUDIO_PLL2_OUT>,
369						 <&clk IMX8MN_CLK_EXT3>;
370					clock-names = "ipg_clk", "ipg_clk_app",
371						      "pll8k", "pll11k", "clkext3";
372					dmas = <&sdma2 24 25 0x80000000>;
373					dma-names = "rx";
374					#sound-dai-cells = <0>;
375					status = "disabled";
376				};
377
378				spdif1: spdif@30090000 {
379					compatible = "fsl,imx35-spdif";
380					reg = <0x30090000 0x10000>;
381					interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
382					clocks = <&clk IMX8MN_CLK_AUDIO_AHB>, /* core */
383						 <&clk IMX8MN_CLK_24M>, /* rxtx0 */
384						 <&clk IMX8MN_CLK_SPDIF1>, /* rxtx1 */
385						 <&clk IMX8MN_CLK_DUMMY>, /* rxtx2 */
386						 <&clk IMX8MN_CLK_DUMMY>, /* rxtx3 */
387						 <&clk IMX8MN_CLK_DUMMY>, /* rxtx4 */
388						 <&clk IMX8MN_CLK_AUDIO_AHB>, /* rxtx5 */
389						 <&clk IMX8MN_CLK_DUMMY>, /* rxtx6 */
390						 <&clk IMX8MN_CLK_DUMMY>, /* rxtx7 */
391						 <&clk IMX8MN_CLK_DUMMY>; /* spba */
392					clock-names = "core", "rxtx0",
393						      "rxtx1", "rxtx2",
394						      "rxtx3", "rxtx4",
395						      "rxtx5", "rxtx6",
396						      "rxtx7", "spba";
397					dmas = <&sdma2 28 18 0>, <&sdma2 29 18 0>;
398					dma-names = "rx", "tx";
399					status = "disabled";
400				};
401
402				sai7: sai@300b0000 {
403					compatible = "fsl,imx8mn-sai", "fsl,imx8mq-sai";
404					reg = <0x300b0000 0x10000>;
405					#sound-dai-cells = <0>;
406					interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
407					clocks = <&clk IMX8MN_CLK_SAI7_IPG>,
408						 <&clk IMX8MN_CLK_DUMMY>,
409						 <&clk IMX8MN_CLK_SAI7_ROOT>,
410						 <&clk IMX8MN_CLK_DUMMY>, <&clk IMX8MN_CLK_DUMMY>;
411					clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
412					dmas = <&sdma2 12 2 0>, <&sdma2 13 2 0>;
413					dma-names = "rx", "tx";
414					status = "disabled";
415				};
416
417				easrc: easrc@300c0000 {
418					compatible = "fsl,imx8mn-easrc";
419					reg = <0x300c0000 0x10000>;
420					interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
421					clocks = <&clk IMX8MN_CLK_ASRC_ROOT>;
422					clock-names = "mem";
423					dmas = <&sdma2 16 23 0> , <&sdma2 17 23 0>,
424					       <&sdma2 18 23 0> , <&sdma2 19 23 0>,
425					       <&sdma2 20 23 0> , <&sdma2 21 23 0>,
426					       <&sdma2 22 23 0> , <&sdma2 23 23 0>;
427					dma-names = "ctx0_rx", "ctx0_tx",
428						    "ctx1_rx", "ctx1_tx",
429						    "ctx2_rx", "ctx2_tx",
430						    "ctx3_rx", "ctx3_tx";
431					firmware-name = "imx/easrc/easrc-imx8mn.bin";
432					fsl,asrc-rate = <8000>;
433					fsl,asrc-format = <2>;
434					status = "disabled";
435				};
436			};
437
438			gpio1: gpio@30200000 {
439				compatible = "fsl,imx8mn-gpio", "fsl,imx35-gpio";
440				reg = <0x30200000 0x10000>;
441				interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
442					     <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
443				clocks = <&clk IMX8MN_CLK_GPIO1_ROOT>;
444				gpio-controller;
445				#gpio-cells = <2>;
446				interrupt-controller;
447				#interrupt-cells = <2>;
448				gpio-ranges = <&iomuxc 0 10 30>;
449			};
450
451			gpio2: gpio@30210000 {
452				compatible = "fsl,imx8mn-gpio", "fsl,imx35-gpio";
453				reg = <0x30210000 0x10000>;
454				interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
455					     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
456				clocks = <&clk IMX8MN_CLK_GPIO2_ROOT>;
457				gpio-controller;
458				#gpio-cells = <2>;
459				interrupt-controller;
460				#interrupt-cells = <2>;
461				gpio-ranges = <&iomuxc 0 40 21>;
462			};
463
464			gpio3: gpio@30220000 {
465				compatible = "fsl,imx8mn-gpio", "fsl,imx35-gpio";
466				reg = <0x30220000 0x10000>;
467				interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
468					     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
469				clocks = <&clk IMX8MN_CLK_GPIO3_ROOT>;
470				gpio-controller;
471				#gpio-cells = <2>;
472				interrupt-controller;
473				#interrupt-cells = <2>;
474				gpio-ranges = <&iomuxc 0 61 26>;
475			};
476
477			gpio4: gpio@30230000 {
478				compatible = "fsl,imx8mn-gpio", "fsl,imx35-gpio";
479				reg = <0x30230000 0x10000>;
480				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
481					     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
482				clocks = <&clk IMX8MN_CLK_GPIO4_ROOT>;
483				gpio-controller;
484				#gpio-cells = <2>;
485				interrupt-controller;
486				#interrupt-cells = <2>;
487				gpio-ranges = <&iomuxc 21 108 11>;
488			};
489
490			gpio5: gpio@30240000 {
491				compatible = "fsl,imx8mn-gpio", "fsl,imx35-gpio";
492				reg = <0x30240000 0x10000>;
493				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
494					     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
495				clocks = <&clk IMX8MN_CLK_GPIO5_ROOT>;
496				gpio-controller;
497				#gpio-cells = <2>;
498				interrupt-controller;
499				#interrupt-cells = <2>;
500				gpio-ranges = <&iomuxc 0 119 30>;
501			};
502
503			tmu: tmu@30260000 {
504				compatible = "fsl,imx8mn-tmu", "fsl,imx8mm-tmu";
505				reg = <0x30260000 0x10000>;
506				clocks = <&clk IMX8MN_CLK_TMU_ROOT>;
507				nvmem-cells = <&tmu_calib>;
508				nvmem-cell-names = "calib";
509				#thermal-sensor-cells = <0>;
510			};
511
512			wdog1: watchdog@30280000 {
513				compatible = "fsl,imx8mn-wdt", "fsl,imx21-wdt";
514				reg = <0x30280000 0x10000>;
515				interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
516				clocks = <&clk IMX8MN_CLK_WDOG1_ROOT>;
517				status = "disabled";
518			};
519
520			wdog2: watchdog@30290000 {
521				compatible = "fsl,imx8mn-wdt", "fsl,imx21-wdt";
522				reg = <0x30290000 0x10000>;
523				interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
524				clocks = <&clk IMX8MN_CLK_WDOG2_ROOT>;
525				status = "disabled";
526			};
527
528			wdog3: watchdog@302a0000 {
529				compatible = "fsl,imx8mn-wdt", "fsl,imx21-wdt";
530				reg = <0x302a0000 0x10000>;
531				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
532				clocks = <&clk IMX8MN_CLK_WDOG3_ROOT>;
533				status = "disabled";
534			};
535
536			sdma3: dma-controller@302b0000 {
537				compatible = "fsl,imx8mn-sdma", "fsl,imx8mq-sdma";
538				reg = <0x302b0000 0x10000>;
539				interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
540				clocks = <&clk IMX8MN_CLK_SDMA3_ROOT>,
541				 <&clk IMX8MN_CLK_SDMA3_ROOT>;
542				clock-names = "ipg", "ahb";
543				#dma-cells = <3>;
544				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
545			};
546
547			sdma2: dma-controller@302c0000 {
548				compatible = "fsl,imx8mn-sdma", "fsl,imx8mq-sdma";
549				reg = <0x302c0000 0x10000>;
550				interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
551				clocks = <&clk IMX8MN_CLK_SDMA2_ROOT>,
552					 <&clk IMX8MN_CLK_SDMA2_ROOT>;
553				clock-names = "ipg", "ahb";
554				#dma-cells = <3>;
555				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
556			};
557
558			iomuxc: pinctrl@30330000 {
559				compatible = "fsl,imx8mn-iomuxc";
560				reg = <0x30330000 0x10000>;
561			};
562
563			gpr: syscon@30340000 {
564				compatible = "fsl,imx8mn-iomuxc-gpr", "syscon";
565				reg = <0x30340000 0x10000>;
566			};
567
568			ocotp: efuse@30350000 {
569				compatible = "fsl,imx8mn-ocotp", "fsl,imx8mm-ocotp", "syscon";
570				reg = <0x30350000 0x10000>;
571				clocks = <&clk IMX8MN_CLK_OCOTP_ROOT>;
572				#address-cells = <1>;
573				#size-cells = <1>;
574
575				/*
576				 * The register address below maps to the MX8M
577				 * Fusemap Description Table entries this way.
578				 * Assuming
579				 *   reg = <ADDR SIZE>;
580				 * then
581				 *   Fuse Address = (ADDR * 4) + 0x400
582				 * Note that if SIZE is greater than 4, then
583				 * each subsequent fuse is located at offset
584				 * +0x10 in Fusemap Description Table (e.g.
585				 * reg = <0x4 0x8> describes fuses 0x410 and
586				 * 0x420).
587				 */
588				imx8mn_uid: unique-id@4 { /* 0x410-0x420 */
589					reg = <0x4 0x8>;
590				};
591
592				cpu_speed_grade: speed-grade@10 { /* 0x440 */
593					reg = <0x10 4>;
594				};
595
596				tmu_calib: calib@3c { /* 0x4f0 */
597					reg = <0x3c 4>;
598				};
599
600				fec_mac_address: mac-address@90 { /* 0x640 */
601					reg = <0x90 6>;
602				};
603			};
604
605			anatop: clock-controller@30360000 {
606				compatible = "fsl,imx8mn-anatop", "fsl,imx8mm-anatop";
607				reg = <0x30360000 0x10000>;
608				#clock-cells = <1>;
609			};
610
611			snvs: snvs@30370000 {
612				compatible = "fsl,sec-v4.0-mon","syscon", "simple-mfd";
613				reg = <0x30370000 0x10000>;
614
615				snvs_rtc: snvs-rtc-lp {
616					compatible = "fsl,sec-v4.0-mon-rtc-lp";
617					regmap = <&snvs>;
618					offset = <0x34>;
619					interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
620						     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
621					clocks = <&clk IMX8MN_CLK_SNVS_ROOT>;
622					clock-names = "snvs-rtc";
623				};
624
625				snvs_pwrkey: snvs-powerkey {
626					compatible = "fsl,sec-v4.0-pwrkey";
627					regmap = <&snvs>;
628					interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
629					clocks = <&clk IMX8MN_CLK_SNVS_ROOT>;
630					clock-names = "snvs-pwrkey";
631					linux,keycode = <KEY_POWER>;
632					wakeup-source;
633					status = "disabled";
634				};
635			};
636
637			clk: clock-controller@30380000 {
638				compatible = "fsl,imx8mn-ccm";
639				reg = <0x30380000 0x10000>;
640				interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
641					     <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
642				#clock-cells = <1>;
643				clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>, <&clk_ext2>,
644					 <&clk_ext3>, <&clk_ext4>;
645				clock-names = "osc_32k", "osc_24m", "clk_ext1", "clk_ext2",
646					      "clk_ext3", "clk_ext4";
647				assigned-clocks = <&clk IMX8MN_CLK_A53_SRC>,
648						<&clk IMX8MN_CLK_A53_CORE>,
649						<&clk IMX8MN_CLK_NOC>,
650						<&clk IMX8MN_CLK_AUDIO_AHB>,
651						<&clk IMX8MN_CLK_IPG_AUDIO_ROOT>,
652						<&clk IMX8MN_SYS_PLL3>,
653						<&clk IMX8MN_AUDIO_PLL1>,
654						<&clk IMX8MN_AUDIO_PLL2>;
655				assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_800M>,
656							 <&clk IMX8MN_ARM_PLL_OUT>,
657							 <&clk IMX8MN_SYS_PLL3_OUT>,
658							 <&clk IMX8MN_SYS_PLL1_800M>;
659				assigned-clock-rates = <0>, <0>, <0>,
660							<400000000>,
661							<400000000>,
662							<600000000>,
663							<393216000>,
664							<361267200>;
665			};
666
667			src: reset-controller@30390000 {
668				compatible = "fsl,imx8mn-src", "fsl,imx8mq-src", "syscon";
669				reg = <0x30390000 0x10000>;
670				interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
671				#reset-cells = <1>;
672			};
673
674			gpc: gpc@303a0000 {
675				compatible = "fsl,imx8mn-gpc";
676				reg = <0x303a0000 0x10000>;
677				interrupt-parent = <&gic>;
678				interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
679
680				pgc {
681					#address-cells = <1>;
682					#size-cells = <0>;
683
684					pgc_hsiomix: power-domain@0 {
685						#power-domain-cells = <0>;
686						reg = <IMX8MN_POWER_DOMAIN_HSIOMIX>;
687						clocks = <&clk IMX8MN_CLK_USB_BUS>;
688					};
689
690					pgc_otg1: power-domain@1 {
691						#power-domain-cells = <0>;
692						reg = <IMX8MN_POWER_DOMAIN_OTG1>;
693					};
694
695					pgc_gpumix: power-domain@2 {
696						#power-domain-cells = <0>;
697						reg = <IMX8MN_POWER_DOMAIN_GPUMIX>;
698						clocks = <&clk IMX8MN_CLK_GPU_CORE_ROOT>,
699							 <&clk IMX8MN_CLK_GPU_SHADER>,
700							 <&clk IMX8MN_CLK_GPU_BUS_ROOT>,
701							 <&clk IMX8MN_CLK_GPU_AHB>;
702					};
703
704					pgc_dispmix: power-domain@3 {
705						#power-domain-cells = <0>;
706						reg = <IMX8MN_POWER_DOMAIN_DISPMIX>;
707						clocks = <&clk IMX8MN_CLK_DISP_AXI_ROOT>,
708							 <&clk IMX8MN_CLK_DISP_APB_ROOT>;
709					};
710
711					pgc_mipi: power-domain@4 {
712						#power-domain-cells = <0>;
713						reg = <IMX8MN_POWER_DOMAIN_MIPI>;
714						power-domains = <&pgc_dispmix>;
715					};
716				};
717			};
718		};
719
720		aips2: bus@30400000 {
721			compatible = "fsl,aips-bus", "simple-bus";
722			reg = <0x30400000 0x400000>;
723			#address-cells = <1>;
724			#size-cells = <1>;
725			ranges;
726
727			pwm1: pwm@30660000 {
728				compatible = "fsl,imx8mn-pwm", "fsl,imx27-pwm";
729				reg = <0x30660000 0x10000>;
730				interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
731				clocks = <&clk IMX8MN_CLK_PWM1_ROOT>,
732					<&clk IMX8MN_CLK_PWM1_ROOT>;
733				clock-names = "ipg", "per";
734				#pwm-cells = <3>;
735				status = "disabled";
736			};
737
738			pwm2: pwm@30670000 {
739				compatible = "fsl,imx8mn-pwm", "fsl,imx27-pwm";
740				reg = <0x30670000 0x10000>;
741				interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
742				clocks = <&clk IMX8MN_CLK_PWM2_ROOT>,
743					 <&clk IMX8MN_CLK_PWM2_ROOT>;
744				clock-names = "ipg", "per";
745				#pwm-cells = <3>;
746				status = "disabled";
747			};
748
749			pwm3: pwm@30680000 {
750				compatible = "fsl,imx8mn-pwm", "fsl,imx27-pwm";
751				reg = <0x30680000 0x10000>;
752				interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
753				clocks = <&clk IMX8MN_CLK_PWM3_ROOT>,
754					 <&clk IMX8MN_CLK_PWM3_ROOT>;
755				clock-names = "ipg", "per";
756				#pwm-cells = <3>;
757				status = "disabled";
758			};
759
760			pwm4: pwm@30690000 {
761				compatible = "fsl,imx8mn-pwm", "fsl,imx27-pwm";
762				reg = <0x30690000 0x10000>;
763				interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
764				clocks = <&clk IMX8MN_CLK_PWM4_ROOT>,
765					 <&clk IMX8MN_CLK_PWM4_ROOT>;
766				clock-names = "ipg", "per";
767				#pwm-cells = <3>;
768				status = "disabled";
769			};
770
771			system_counter: timer@306a0000 {
772				compatible = "nxp,sysctr-timer";
773				reg = <0x306a0000 0x20000>;
774				interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
775				clocks = <&osc_24m>;
776				clock-names = "per";
777			};
778		};
779
780		aips3: bus@30800000 {
781			compatible = "fsl,aips-bus", "simple-bus";
782			reg = <0x30800000 0x400000>;
783			#address-cells = <1>;
784			#size-cells = <1>;
785			ranges;
786
787			spba1: spba-bus@30800000 {
788				compatible = "fsl,spba-bus", "simple-bus";
789				#address-cells = <1>;
790				#size-cells = <1>;
791				reg = <0x30800000 0x100000>;
792				ranges;
793
794				ecspi1: spi@30820000 {
795					compatible = "fsl,imx8mn-ecspi", "fsl,imx51-ecspi";
796					#address-cells = <1>;
797					#size-cells = <0>;
798					reg = <0x30820000 0x10000>;
799					interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
800					clocks = <&clk IMX8MN_CLK_ECSPI1_ROOT>,
801						 <&clk IMX8MN_CLK_ECSPI1_ROOT>;
802					clock-names = "ipg", "per";
803					dmas = <&sdma1 0 7 1>, <&sdma1 1 7 2>;
804					dma-names = "rx", "tx";
805					status = "disabled";
806				};
807
808				ecspi2: spi@30830000 {
809					compatible = "fsl,imx8mn-ecspi", "fsl,imx51-ecspi";
810					#address-cells = <1>;
811					#size-cells = <0>;
812					reg = <0x30830000 0x10000>;
813					interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
814					clocks = <&clk IMX8MN_CLK_ECSPI2_ROOT>,
815						 <&clk IMX8MN_CLK_ECSPI2_ROOT>;
816					clock-names = "ipg", "per";
817					dmas = <&sdma1 2 7 1>, <&sdma1 3 7 2>;
818					dma-names = "rx", "tx";
819					status = "disabled";
820				};
821
822				ecspi3: spi@30840000 {
823					compatible = "fsl,imx8mn-ecspi", "fsl,imx51-ecspi";
824					#address-cells = <1>;
825					#size-cells = <0>;
826					reg = <0x30840000 0x10000>;
827					interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
828					clocks = <&clk IMX8MN_CLK_ECSPI3_ROOT>,
829						 <&clk IMX8MN_CLK_ECSPI3_ROOT>;
830					clock-names = "ipg", "per";
831					dmas = <&sdma1 4 7 1>, <&sdma1 5 7 2>;
832					dma-names = "rx", "tx";
833					status = "disabled";
834				};
835
836				uart1: serial@30860000 {
837					compatible = "fsl,imx8mn-uart", "fsl,imx6q-uart";
838					reg = <0x30860000 0x10000>;
839					interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
840					clocks = <&clk IMX8MN_CLK_UART1_ROOT>,
841						 <&clk IMX8MN_CLK_UART1_ROOT>;
842					clock-names = "ipg", "per";
843					dmas = <&sdma1 22 4 0>, <&sdma1 23 4 0>;
844					dma-names = "rx", "tx";
845					status = "disabled";
846				};
847
848				uart3: serial@30880000 {
849					compatible = "fsl,imx8mn-uart", "fsl,imx6q-uart";
850					reg = <0x30880000 0x10000>;
851					interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
852					clocks = <&clk IMX8MN_CLK_UART3_ROOT>,
853						 <&clk IMX8MN_CLK_UART3_ROOT>;
854					clock-names = "ipg", "per";
855					dmas = <&sdma1 26 4 0>, <&sdma1 27 4 0>;
856					dma-names = "rx", "tx";
857					status = "disabled";
858				};
859
860				uart2: serial@30890000 {
861					compatible = "fsl,imx8mn-uart", "fsl,imx6q-uart";
862					reg = <0x30890000 0x10000>;
863					interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
864					clocks = <&clk IMX8MN_CLK_UART2_ROOT>,
865						 <&clk IMX8MN_CLK_UART2_ROOT>;
866					clock-names = "ipg", "per";
867					status = "disabled";
868				};
869			};
870
871			crypto: crypto@30900000 {
872				compatible = "fsl,sec-v4.0";
873				#address-cells = <1>;
874				#size-cells = <1>;
875				reg = <0x30900000 0x40000>;
876				ranges = <0 0x30900000 0x40000>;
877				interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
878				clocks = <&clk IMX8MN_CLK_AHB>,
879					 <&clk IMX8MN_CLK_IPG_ROOT>;
880				clock-names = "aclk", "ipg";
881
882				sec_jr0: jr@1000 {
883					 compatible = "fsl,sec-v4.0-job-ring";
884					 reg = <0x1000 0x1000>;
885					 interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
886					 status = "disabled";
887				};
888
889				sec_jr1: jr@2000 {
890					 compatible = "fsl,sec-v4.0-job-ring";
891					 reg = <0x2000 0x1000>;
892					 interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
893				};
894
895				sec_jr2: jr@3000 {
896					 compatible = "fsl,sec-v4.0-job-ring";
897					 reg = <0x3000 0x1000>;
898					 interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
899				};
900			};
901
902			i2c1: i2c@30a20000 {
903				compatible = "fsl,imx8mn-i2c", "fsl,imx21-i2c";
904				#address-cells = <1>;
905				#size-cells = <0>;
906				reg = <0x30a20000 0x10000>;
907				interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
908				clocks = <&clk IMX8MN_CLK_I2C1_ROOT>;
909				status = "disabled";
910			};
911
912			i2c2: i2c@30a30000 {
913				compatible = "fsl,imx8mn-i2c", "fsl,imx21-i2c";
914				#address-cells = <1>;
915				#size-cells = <0>;
916				reg = <0x30a30000 0x10000>;
917				interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
918				clocks = <&clk IMX8MN_CLK_I2C2_ROOT>;
919				status = "disabled";
920			};
921
922			i2c3: i2c@30a40000 {
923				#address-cells = <1>;
924				#size-cells = <0>;
925				compatible = "fsl,imx8mn-i2c", "fsl,imx21-i2c";
926				reg = <0x30a40000 0x10000>;
927				interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
928				clocks = <&clk IMX8MN_CLK_I2C3_ROOT>;
929				status = "disabled";
930			};
931
932			i2c4: i2c@30a50000 {
933				compatible = "fsl,imx8mn-i2c", "fsl,imx21-i2c";
934				#address-cells = <1>;
935				#size-cells = <0>;
936				reg = <0x30a50000 0x10000>;
937				interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
938				clocks = <&clk IMX8MN_CLK_I2C4_ROOT>;
939				status = "disabled";
940			};
941
942			uart4: serial@30a60000 {
943				compatible = "fsl,imx8mn-uart", "fsl,imx6q-uart";
944				reg = <0x30a60000 0x10000>;
945				interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
946				clocks = <&clk IMX8MN_CLK_UART4_ROOT>,
947					 <&clk IMX8MN_CLK_UART4_ROOT>;
948				clock-names = "ipg", "per";
949				dmas = <&sdma1 28 4 0>, <&sdma1 29 4 0>;
950				dma-names = "rx", "tx";
951				status = "disabled";
952			};
953
954			mu: mailbox@30aa0000 {
955				compatible = "fsl,imx8mn-mu", "fsl,imx6sx-mu";
956				reg = <0x30aa0000 0x10000>;
957				interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
958				clocks = <&clk IMX8MN_CLK_MU_ROOT>;
959				#mbox-cells = <2>;
960			};
961
962			usdhc1: mmc@30b40000 {
963				compatible = "fsl,imx8mn-usdhc", "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc";
964				reg = <0x30b40000 0x10000>;
965				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
966				clocks = <&clk IMX8MN_CLK_IPG_ROOT>,
967					 <&clk IMX8MN_CLK_NAND_USDHC_BUS>,
968					 <&clk IMX8MN_CLK_USDHC1_ROOT>;
969				clock-names = "ipg", "ahb", "per";
970				fsl,tuning-start-tap = <20>;
971				fsl,tuning-step = <2>;
972				bus-width = <4>;
973				status = "disabled";
974			};
975
976			usdhc2: mmc@30b50000 {
977				compatible = "fsl,imx8mn-usdhc", "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc";
978				reg = <0x30b50000 0x10000>;
979				interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
980				clocks = <&clk IMX8MN_CLK_IPG_ROOT>,
981					 <&clk IMX8MN_CLK_NAND_USDHC_BUS>,
982					 <&clk IMX8MN_CLK_USDHC2_ROOT>;
983				clock-names = "ipg", "ahb", "per";
984				fsl,tuning-start-tap = <20>;
985				fsl,tuning-step = <2>;
986				bus-width = <4>;
987				status = "disabled";
988			};
989
990			usdhc3: mmc@30b60000 {
991				compatible = "fsl,imx8mn-usdhc", "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc";
992				reg = <0x30b60000 0x10000>;
993				interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
994				clocks = <&clk IMX8MN_CLK_IPG_ROOT>,
995					 <&clk IMX8MN_CLK_NAND_USDHC_BUS>,
996					 <&clk IMX8MN_CLK_USDHC3_ROOT>;
997				clock-names = "ipg", "ahb", "per";
998				fsl,tuning-start-tap = <20>;
999				fsl,tuning-step = <2>;
1000				bus-width = <4>;
1001				status = "disabled";
1002			};
1003
1004			flexspi: spi@30bb0000 {
1005				#address-cells = <1>;
1006				#size-cells = <0>;
1007				compatible = "nxp,imx8mm-fspi";
1008				reg = <0x30bb0000 0x10000>, <0x8000000 0x10000000>;
1009				reg-names = "fspi_base", "fspi_mmap";
1010				interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
1011				clocks = <&clk IMX8MN_CLK_QSPI_ROOT>,
1012					 <&clk IMX8MN_CLK_QSPI_ROOT>;
1013				clock-names = "fspi_en", "fspi";
1014				status = "disabled";
1015			};
1016
1017			sdma1: dma-controller@30bd0000 {
1018				compatible = "fsl,imx8mn-sdma", "fsl,imx8mq-sdma";
1019				reg = <0x30bd0000 0x10000>;
1020				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
1021				clocks = <&clk IMX8MN_CLK_SDMA1_ROOT>,
1022					 <&clk IMX8MN_CLK_AHB>;
1023				clock-names = "ipg", "ahb";
1024				#dma-cells = <3>;
1025				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
1026			};
1027
1028			fec1: ethernet@30be0000 {
1029				compatible = "fsl,imx8mn-fec", "fsl,imx8mq-fec", "fsl,imx6sx-fec";
1030				reg = <0x30be0000 0x10000>;
1031				interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
1032					     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
1033					     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
1034					     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
1035				clocks = <&clk IMX8MN_CLK_ENET1_ROOT>,
1036					 <&clk IMX8MN_CLK_ENET1_ROOT>,
1037					 <&clk IMX8MN_CLK_ENET_TIMER>,
1038					 <&clk IMX8MN_CLK_ENET_REF>,
1039					 <&clk IMX8MN_CLK_ENET_PHY_REF>;
1040				clock-names = "ipg", "ahb", "ptp",
1041					      "enet_clk_ref", "enet_out";
1042				assigned-clocks = <&clk IMX8MN_CLK_ENET_AXI>,
1043						  <&clk IMX8MN_CLK_ENET_TIMER>,
1044						  <&clk IMX8MN_CLK_ENET_REF>,
1045						  <&clk IMX8MN_CLK_ENET_PHY_REF>;
1046				assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_266M>,
1047							 <&clk IMX8MN_SYS_PLL2_100M>,
1048							 <&clk IMX8MN_SYS_PLL2_125M>,
1049							 <&clk IMX8MN_SYS_PLL2_50M>;
1050				assigned-clock-rates = <0>, <100000000>, <125000000>, <0>;
1051				fsl,num-tx-queues = <3>;
1052				fsl,num-rx-queues = <3>;
1053				nvmem-cells = <&fec_mac_address>;
1054				nvmem-cell-names = "mac-address";
1055				fsl,stop-mode = <&gpr 0x10 3>;
1056				status = "disabled";
1057			};
1058
1059		};
1060
1061		aips4: bus@32c00000 {
1062			compatible = "fsl,aips-bus", "simple-bus";
1063			reg = <0x32c00000 0x400000>;
1064			#address-cells = <1>;
1065			#size-cells = <1>;
1066			ranges;
1067
1068			lcdif: lcdif@32e00000 {
1069				compatible = "fsl,imx8mn-lcdif", "fsl,imx6sx-lcdif";
1070				reg = <0x32e00000 0x10000>;
1071				clocks = <&clk IMX8MN_CLK_DISP_PIXEL_ROOT>,
1072					 <&clk IMX8MN_CLK_DISP_APB_ROOT>,
1073					 <&clk IMX8MN_CLK_DISP_AXI_ROOT>;
1074				clock-names = "pix", "axi", "disp_axi";
1075				interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
1076				power-domains = <&disp_blk_ctrl IMX8MN_DISPBLK_PD_LCDIF>;
1077				status = "disabled";
1078
1079				port {
1080					lcdif_to_dsim: endpoint {
1081						remote-endpoint = <&dsim_from_lcdif>;
1082					};
1083				};
1084			};
1085
1086			mipi_dsi: dsi@32e10000 {
1087				compatible = "fsl,imx8mn-mipi-dsim", "fsl,imx8mm-mipi-dsim";
1088				reg = <0x32e10000 0x400>;
1089				clocks = <&clk IMX8MN_CLK_DSI_CORE>,
1090					 <&clk IMX8MN_CLK_DSI_PHY_REF>;
1091				clock-names = "bus_clk", "sclk_mipi";
1092				interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
1093				power-domains = <&disp_blk_ctrl IMX8MN_DISPBLK_PD_MIPI_DSI>;
1094				status = "disabled";
1095
1096				ports {
1097					#address-cells = <1>;
1098					#size-cells = <0>;
1099
1100					port@0 {
1101						reg = <0>;
1102
1103						dsim_from_lcdif: endpoint {
1104							remote-endpoint = <&lcdif_to_dsim>;
1105						};
1106					};
1107
1108					port@1 {
1109						reg = <1>;
1110
1111						mipi_dsi_out: endpoint {
1112						};
1113					};
1114				};
1115			};
1116
1117			isi: isi@32e20000 {
1118				compatible = "fsl,imx8mn-isi";
1119				reg = <0x32e20000 0x8000>;
1120				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
1121				clocks = <&clk IMX8MN_CLK_DISP_AXI_ROOT>,
1122					 <&clk IMX8MN_CLK_DISP_APB_ROOT>;
1123				clock-names = "axi", "apb";
1124				fsl,blk-ctrl = <&disp_blk_ctrl>;
1125				power-domains = <&disp_blk_ctrl IMX8MN_DISPBLK_PD_ISI>;
1126				status = "disabled";
1127
1128				ports {
1129					#address-cells = <1>;
1130					#size-cells = <0>;
1131
1132					port@0 {
1133						reg = <0>;
1134						isi_in: endpoint {
1135							remote-endpoint = <&mipi_csi_out>;
1136						};
1137					};
1138				};
1139			};
1140
1141			disp_blk_ctrl: blk-ctrl@32e28000 {
1142				compatible = "fsl,imx8mn-disp-blk-ctrl", "syscon";
1143				reg = <0x32e28000 0x100>;
1144				power-domains = <&pgc_dispmix>, <&pgc_dispmix>,
1145						<&pgc_dispmix>, <&pgc_mipi>,
1146						<&pgc_mipi>;
1147				power-domain-names = "bus", "isi",
1148						     "lcdif", "mipi-dsi",
1149						     "mipi-csi";
1150				clocks = <&clk IMX8MN_CLK_DISP_AXI>,
1151					 <&clk IMX8MN_CLK_DISP_APB>,
1152					 <&clk IMX8MN_CLK_DISP_AXI_ROOT>,
1153					 <&clk IMX8MN_CLK_DISP_APB_ROOT>,
1154					 <&clk IMX8MN_CLK_DISP_AXI_ROOT>,
1155					 <&clk IMX8MN_CLK_DISP_APB_ROOT>,
1156					 <&clk IMX8MN_CLK_DISP_PIXEL_ROOT>,
1157					 <&clk IMX8MN_CLK_DSI_CORE>,
1158					 <&clk IMX8MN_CLK_DSI_PHY_REF>,
1159					 <&clk IMX8MN_CLK_CSI1_PHY_REF>,
1160					 <&clk IMX8MN_CLK_CAMERA_PIXEL_ROOT>;
1161				clock-names = "disp_axi", "disp_apb",
1162					      "disp_axi_root", "disp_apb_root",
1163					      "lcdif-axi", "lcdif-apb", "lcdif-pix",
1164					      "dsi-pclk", "dsi-ref",
1165					      "csi-aclk", "csi-pclk";
1166				assigned-clocks = <&clk IMX8MN_CLK_DSI_CORE>,
1167						  <&clk IMX8MN_CLK_DSI_PHY_REF>,
1168						  <&clk IMX8MN_CLK_DISP_PIXEL>,
1169						  <&clk IMX8MN_CLK_DISP_AXI>,
1170						  <&clk IMX8MN_CLK_DISP_APB>;
1171				assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_266M>,
1172							 <&clk IMX8MN_CLK_24M>,
1173							 <&clk IMX8MN_VIDEO_PLL1_OUT>,
1174							 <&clk IMX8MN_SYS_PLL2_1000M>,
1175							 <&clk IMX8MN_SYS_PLL1_800M>;
1176				assigned-clock-rates = <266000000>,
1177						       <24000000>,
1178						       <24000000>,
1179						       <500000000>,
1180						       <200000000>;
1181				#power-domain-cells = <1>;
1182			};
1183
1184			mipi_csi: mipi-csi@32e30000 {
1185				compatible = "fsl,imx8mm-mipi-csi2";
1186				reg = <0x32e30000 0x1000>;
1187				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
1188				assigned-clocks = <&clk IMX8MN_CLK_CAMERA_PIXEL>;
1189				assigned-clock-parents = <&clk IMX8MN_SYS_PLL2_1000M>;
1190				assigned-clock-rates = <333000000>;
1191				clock-frequency = <333000000>;
1192				clocks = <&clk IMX8MN_CLK_DISP_APB_ROOT>,
1193					 <&clk IMX8MN_CLK_CAMERA_PIXEL>,
1194					 <&clk IMX8MN_CLK_CSI1_PHY_REF>,
1195					 <&clk IMX8MN_CLK_DISP_AXI_ROOT>;
1196				clock-names = "pclk", "wrap", "phy", "axi";
1197				power-domains = <&disp_blk_ctrl IMX8MN_DISPBLK_PD_MIPI_CSI>;
1198				status = "disabled";
1199
1200				ports {
1201					#address-cells = <1>;
1202					#size-cells = <0>;
1203
1204					port@0 {
1205						reg = <0>;
1206					};
1207
1208					port@1 {
1209						reg = <1>;
1210
1211						mipi_csi_out: endpoint {
1212							remote-endpoint = <&isi_in>;
1213						};
1214					};
1215				};
1216			};
1217
1218			usbotg1: usb@32e40000 {
1219				compatible = "fsl,imx8mn-usb", "fsl,imx7d-usb", "fsl,imx27-usb";
1220				reg = <0x32e40000 0x200>;
1221				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
1222				clocks = <&clk IMX8MN_CLK_USB1_CTRL_ROOT>;
1223				assigned-clocks = <&clk IMX8MN_CLK_USB_BUS>;
1224				assigned-clock-parents = <&clk IMX8MN_SYS_PLL2_500M>;
1225				phys = <&usbphynop1>;
1226				fsl,usbmisc = <&usbmisc1 0>;
1227				power-domains = <&pgc_hsiomix>;
1228				status = "disabled";
1229			};
1230
1231			usbmisc1: usbmisc@32e40200 {
1232				compatible = "fsl,imx8mn-usbmisc", "fsl,imx7d-usbmisc",
1233					     "fsl,imx6q-usbmisc";
1234				#index-cells = <1>;
1235				reg = <0x32e40200 0x200>;
1236			};
1237		};
1238
1239		dma_apbh: dma-controller@33000000 {
1240			compatible = "fsl,imx7d-dma-apbh", "fsl,imx28-dma-apbh";
1241			reg = <0x33000000 0x2000>;
1242			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
1243				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
1244				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
1245				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
1246			#dma-cells = <1>;
1247			dma-channels = <4>;
1248			clocks = <&clk IMX8MN_CLK_NAND_USDHC_BUS_RAWNAND_CLK>;
1249		};
1250
1251		gpmi: nand-controller@33002000 {
1252			compatible = "fsl,imx8mn-gpmi-nand", "fsl,imx7d-gpmi-nand";
1253			#address-cells = <1>;
1254			#size-cells = <0>;
1255			reg = <0x33002000 0x2000>, <0x33004000 0x4000>;
1256			reg-names = "gpmi-nand", "bch";
1257			interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
1258			interrupt-names = "bch";
1259			clocks = <&clk IMX8MN_CLK_NAND_ROOT>,
1260				 <&clk IMX8MN_CLK_NAND_USDHC_BUS_RAWNAND_CLK>;
1261			clock-names = "gpmi_io", "gpmi_bch_apb";
1262			dmas = <&dma_apbh 0>;
1263			dma-names = "rx-tx";
1264			status = "disabled";
1265		};
1266
1267		gpu: gpu@38000000 {
1268			compatible = "vivante,gc";
1269			reg = <0x38000000 0x8000>;
1270			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
1271			clocks = <&clk IMX8MN_CLK_GPU_AHB>,
1272				<&clk IMX8MN_CLK_GPU_BUS_ROOT>,
1273				<&clk IMX8MN_CLK_GPU_CORE_ROOT>,
1274				<&clk IMX8MN_CLK_GPU_SHADER>;
1275			clock-names = "reg", "bus", "core", "shader";
1276			assigned-clocks = <&clk IMX8MN_CLK_GPU_CORE>,
1277					  <&clk IMX8MN_CLK_GPU_SHADER>,
1278					  <&clk IMX8MN_CLK_GPU_AXI>,
1279					  <&clk IMX8MN_CLK_GPU_AHB>,
1280					  <&clk IMX8MN_GPU_PLL>;
1281			assigned-clock-parents = <&clk IMX8MN_GPU_PLL_OUT>,
1282						  <&clk IMX8MN_GPU_PLL_OUT>,
1283						  <&clk IMX8MN_SYS_PLL1_800M>,
1284						  <&clk IMX8MN_SYS_PLL1_800M>;
1285			assigned-clock-rates = <400000000>,
1286					       <400000000>,
1287					       <800000000>,
1288					       <400000000>,
1289					       <1200000000>;
1290			power-domains = <&pgc_gpumix>;
1291		};
1292
1293		gic: interrupt-controller@38800000 {
1294			compatible = "arm,gic-v3";
1295			reg = <0x38800000 0x10000>,
1296			      <0x38880000 0xc0000>;
1297			#interrupt-cells = <3>;
1298			interrupt-controller;
1299			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
1300		};
1301
1302		ddrc: memory-controller@3d400000 {
1303			compatible = "fsl,imx8mn-ddrc", "fsl,imx8m-ddrc";
1304			reg = <0x3d400000 0x400000>;
1305			clock-names = "core", "pll", "alt", "apb";
1306			clocks = <&clk IMX8MN_CLK_DRAM_CORE>,
1307				 <&clk IMX8MN_DRAM_PLL>,
1308				 <&clk IMX8MN_CLK_DRAM_ALT>,
1309				 <&clk IMX8MN_CLK_DRAM_APB>;
1310		};
1311
1312		ddr-pmu@3d800000 {
1313			compatible = "fsl,imx8mn-ddr-pmu", "fsl,imx8m-ddr-pmu";
1314			reg = <0x3d800000 0x400000>;
1315			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
1316		};
1317	};
1318
1319	usbphynop1: usbphynop1 {
1320		#phy-cells = <0>;
1321		compatible = "usb-nop-xceiv";
1322		clocks = <&clk IMX8MN_CLK_USB_PHY_REF>;
1323		assigned-clocks = <&clk IMX8MN_CLK_USB_PHY_REF>;
1324		assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_100M>;
1325		clock-names = "main_clk";
1326		power-domains = <&pgc_otg1>;
1327	};
1328};
1329