xref: /linux/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts (revision 7a4ffec9fd54ea27395e24dff726dbf58e2fe06b)
1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2/*
3 * Copyright 2021 Gateworks Corporation
4 */
5
6/dts-v1/;
7
8#include <dt-bindings/gpio/gpio.h>
9#include <dt-bindings/input/linux-event-codes.h>
10#include <dt-bindings/leds/common.h>
11#include <dt-bindings/net/ti-dp83867.h>
12
13#include "imx8mn.dtsi"
14
15/ {
16	model = "Gateworks Venice GW7902 i.MX8MN board";
17	compatible = "gw,imx8mn-gw7902", "fsl,imx8mn";
18
19	aliases {
20		usb0 = &usbotg1;
21	};
22
23	chosen {
24		stdout-path = &uart2;
25	};
26
27	memory@40000000 {
28		device_type = "memory";
29		reg = <0x0 0x40000000 0 0x80000000>;
30	};
31
32	can20m: can20m {
33		compatible = "fixed-clock";
34		#clock-cells = <0>;
35		clock-frequency = <20000000>;
36		clock-output-names = "can20m";
37	};
38
39	gpio-keys {
40		compatible = "gpio-keys";
41
42		key-user-pb {
43			label = "user_pb";
44			gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
45			linux,code = <BTN_0>;
46		};
47
48		key-user-pb1x {
49			label = "user_pb1x";
50			linux,code = <BTN_1>;
51			interrupt-parent = <&gsc>;
52			interrupts = <0>;
53		};
54
55		key-erased {
56			label = "key_erased";
57			linux,code = <BTN_2>;
58			interrupt-parent = <&gsc>;
59			interrupts = <1>;
60		};
61
62		key-eeprom-wp {
63			label = "eeprom_wp";
64			linux,code = <BTN_3>;
65			interrupt-parent = <&gsc>;
66			interrupts = <2>;
67		};
68
69		key-tamper {
70			label = "tamper";
71			linux,code = <BTN_4>;
72			interrupt-parent = <&gsc>;
73			interrupts = <5>;
74		};
75
76		switch-hold {
77			label = "switch_hold";
78			linux,code = <BTN_5>;
79			interrupt-parent = <&gsc>;
80			interrupts = <7>;
81		};
82	};
83
84	led-controller {
85		compatible = "gpio-leds";
86		pinctrl-names = "default";
87		pinctrl-0 = <&pinctrl_gpio_leds>;
88
89		led-0 {
90			function = LED_FUNCTION_STATUS;
91			color = <LED_COLOR_ID_GREEN>;
92			label = "panel1";
93			gpios = <&gpio3 21 GPIO_ACTIVE_LOW>;
94			default-state = "off";
95		};
96
97		led-1 {
98			function = LED_FUNCTION_STATUS;
99			color = <LED_COLOR_ID_GREEN>;
100			label = "panel2";
101			gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
102			default-state = "off";
103		};
104
105		led-2 {
106			function = LED_FUNCTION_STATUS;
107			color = <LED_COLOR_ID_GREEN>;
108			label = "panel3";
109			gpios = <&gpio3 22 GPIO_ACTIVE_LOW>;
110			default-state = "off";
111		};
112
113		led-3 {
114			function = LED_FUNCTION_STATUS;
115			color = <LED_COLOR_ID_GREEN>;
116			label = "panel4";
117			gpios = <&gpio3 20 GPIO_ACTIVE_LOW>;
118			default-state = "off";
119		};
120
121		led-4 {
122			function = LED_FUNCTION_STATUS;
123			color = <LED_COLOR_ID_GREEN>;
124			label = "panel5";
125			gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
126			default-state = "off";
127		};
128	};
129
130	pps {
131		compatible = "pps-gpio";
132		pinctrl-names = "default";
133		pinctrl-0 = <&pinctrl_pps>;
134		gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>;
135		status = "okay";
136	};
137
138	reg_3p3v: regulator-3p3v {
139		compatible = "regulator-fixed";
140		regulator-name = "3P3V";
141		regulator-min-microvolt = <3300000>;
142		regulator-max-microvolt = <3300000>;
143		regulator-always-on;
144	};
145
146	reg_usb1_vbus: regulator-usb1 {
147		compatible = "regulator-fixed";
148		pinctrl-names = "default";
149		pinctrl-0 = <&pinctrl_reg_usb1>;
150		regulator-name = "usb_usb1_vbus";
151		gpio = <&gpio2 7 GPIO_ACTIVE_HIGH>;
152		enable-active-high;
153		regulator-min-microvolt = <5000000>;
154		regulator-max-microvolt = <5000000>;
155	};
156
157	reg_wifi: regulator-wifi {
158		compatible = "regulator-fixed";
159		pinctrl-names = "default";
160		pinctrl-0 = <&pinctrl_reg_wl>;
161		regulator-name = "wifi";
162		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
163		enable-active-high;
164		startup-delay-us = <100>;
165		regulator-min-microvolt = <3300000>;
166		regulator-max-microvolt = <3300000>;
167	};
168};
169
170&A53_0 {
171	cpu-supply = <&buck2>;
172};
173
174&A53_1 {
175	cpu-supply = <&buck2>;
176};
177
178&A53_2 {
179	cpu-supply = <&buck2>;
180};
181
182&A53_3 {
183	cpu-supply = <&buck2>;
184};
185
186&ddrc {
187	operating-points-v2 = <&ddrc_opp_table>;
188
189	ddrc_opp_table: opp-table {
190		compatible = "operating-points-v2";
191
192		opp-25000000 {
193			opp-hz = /bits/ 64 <25000000>;
194		};
195
196		opp-100000000 {
197			opp-hz = /bits/ 64 <100000000>;
198		};
199
200		opp-750000000 {
201			opp-hz = /bits/ 64 <750000000>;
202		};
203	};
204};
205
206&ecspi1 {
207	pinctrl-names = "default";
208	pinctrl-0 = <&pinctrl_spi1>;
209	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
210	status = "okay";
211
212	can@0 {
213		compatible = "microchip,mcp2515";
214		reg = <0>;
215		clocks = <&can20m>;
216		interrupt-parent = <&gpio2>;
217		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
218		spi-max-frequency = <10000000>;
219	};
220};
221
222&disp_blk_ctrl {
223	status = "disabled";
224};
225
226/* off-board header */
227&ecspi2 {
228	pinctrl-names = "default";
229	pinctrl-0 = <&pinctrl_spi2>;
230	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
231	status = "okay";
232};
233
234&fec1 {
235	pinctrl-names = "default";
236	pinctrl-0 = <&pinctrl_fec1>;
237	phy-mode = "rgmii-id";
238	phy-handle = <&ethphy0>;
239	local-mac-address = [00 00 00 00 00 00];
240	status = "okay";
241
242	mdio {
243		#address-cells = <1>;
244		#size-cells = <0>;
245
246		ethphy0: ethernet-phy@0 {
247			compatible = "ethernet-phy-ieee802.3-c22";
248			reg = <0>;
249			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
250			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
251			tx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
252			rx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
253		};
254	};
255};
256
257&gpio1 {
258	gpio-line-names = "", "", "", "", "", "", "", "",
259		"m2_pwr_en", "", "", "", "", "m2_reset", "", "m2_wdis#",
260		"", "", "", "", "", "", "", "",
261		"", "", "", "", "", "", "", "";
262};
263
264&gpio2 {
265	gpio-line-names = "", "", "", "", "", "", "", "",
266		"uart2_en#", "", "", "", "", "", "", "",
267		"", "", "", "", "", "", "", "",
268		"", "", "", "", "", "", "", "";
269};
270
271&gpio3 {
272	gpio-line-names = "", "m2_gdis#", "", "", "", "", "", "m2_off#",
273		"", "", "", "", "", "", "", "",
274		"", "", "", "", "", "", "", "",
275		"", "", "", "", "", "", "", "";
276};
277
278&gpio4 {
279	gpio-line-names = "", "", "", "", "", "", "", "",
280		"", "", "", "", "", "", "", "",
281		"", "", "", "", "", "app_gpio1", "vdd_4p0_en", "uart1_rs485",
282		"", "uart1_term", "uart1_half", "app_gpio2",
283		"mipi_gpio1", "", "", "";
284};
285
286&gpio5 {
287	gpio-line-names = "", "", "", "mipi_gpio4",
288		"mipi_gpio3", "mipi_gpio2", "", "",
289		"", "", "", "", "", "", "", "",
290		"", "", "", "", "", "", "", "",
291		"", "", "", "", "", "", "", "";
292};
293
294&gpu {
295	status = "disabled";
296};
297
298&i2c1 {
299	clock-frequency = <100000>;
300	pinctrl-names = "default", "gpio";
301	pinctrl-0 = <&pinctrl_i2c1>;
302	pinctrl-1 = <&pinctrl_i2c1_gpio>;
303	scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
304	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
305	status = "okay";
306
307	gsc: gsc@20 {
308		compatible = "gw,gsc";
309		reg = <0x20>;
310		pinctrl-0 = <&pinctrl_gsc>;
311		interrupt-parent = <&gpio2>;
312		interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
313		interrupt-controller;
314		#interrupt-cells = <1>;
315		#address-cells = <1>;
316		#size-cells = <0>;
317
318		adc {
319			compatible = "gw,gsc-adc";
320			#address-cells = <1>;
321			#size-cells = <0>;
322
323			channel@6 {
324				gw,mode = <0>;
325				reg = <0x06>;
326				label = "temp";
327			};
328
329			channel@8 {
330				gw,mode = <3>;
331				reg = <0x08>;
332				label = "vdd_bat";
333			};
334
335			channel@82 {
336				gw,mode = <2>;
337				reg = <0x82>;
338				label = "vin";
339				gw,voltage-divider-ohms = <22100 1000>;
340				gw,voltage-offset-microvolt = <700000>;
341			};
342
343			channel@84 {
344				gw,mode = <2>;
345				reg = <0x84>;
346				label = "vin_4p0";
347				gw,voltage-divider-ohms = <10000 10000>;
348			};
349
350			channel@86 {
351				gw,mode = <2>;
352				reg = <0x86>;
353				label = "vdd_3p3";
354				gw,voltage-divider-ohms = <10000 10000>;
355			};
356
357			channel@88 {
358				gw,mode = <2>;
359				reg = <0x88>;
360				label = "vdd_0p9";
361			};
362
363			channel@8c {
364				gw,mode = <2>;
365				reg = <0x8c>;
366				label = "vdd_soc";
367			};
368
369			channel@8e {
370				gw,mode = <2>;
371				reg = <0x8e>;
372				label = "vdd_arm";
373			};
374
375			channel@90 {
376				gw,mode = <2>;
377				reg = <0x90>;
378				label = "vdd_1p8";
379			};
380
381			channel@92 {
382				gw,mode = <2>;
383				reg = <0x92>;
384				label = "vdd_dram";
385			};
386
387			channel@98 {
388				gw,mode = <2>;
389				reg = <0x98>;
390				label = "vdd_1p0";
391			};
392
393			channel@9a {
394				gw,mode = <2>;
395				reg = <0x9a>;
396				label = "vdd_2p5";
397				gw,voltage-divider-ohms = <10000 10000>;
398			};
399
400			channel@9c {
401				gw,mode = <2>;
402				reg = <0x9c>;
403				label = "vdd_5p0";
404				gw,voltage-divider-ohms = <10000 10000>;
405			};
406
407			channel@a2 {
408				gw,mode = <2>;
409				reg = <0xa2>;
410				label = "vdd_gsc";
411				gw,voltage-divider-ohms = <10000 10000>;
412			};
413		};
414	};
415
416	gpio: gpio@23 {
417		compatible = "nxp,pca9555";
418		reg = <0x23>;
419		gpio-controller;
420		#gpio-cells = <2>;
421		interrupt-parent = <&gsc>;
422		interrupts = <4>;
423	};
424
425	pmic@4b {
426		compatible = "rohm,bd71847";
427		reg = <0x4b>;
428		pinctrl-names = "default";
429		pinctrl-0 = <&pinctrl_pmic>;
430		interrupt-parent = <&gpio3>;
431		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
432		rohm,reset-snvs-powered;
433		#clock-cells = <0>;
434		clocks = <&osc_32k>;
435		clock-output-names = "clk-32k-out";
436
437		regulators {
438			/* vdd_soc: 0.805-0.900V (typ=0.8V) */
439			BUCK1 {
440				regulator-name = "buck1";
441				regulator-min-microvolt = <700000>;
442				regulator-max-microvolt = <1300000>;
443				regulator-boot-on;
444				regulator-always-on;
445				regulator-ramp-delay = <1250>;
446			};
447
448			/* vdd_arm: 0.805-1.0V (typ=0.9V) */
449			buck2: BUCK2 {
450				regulator-name = "buck2";
451				regulator-min-microvolt = <700000>;
452				regulator-max-microvolt = <1300000>;
453				regulator-boot-on;
454				regulator-always-on;
455				regulator-ramp-delay = <1250>;
456				rohm,dvs-run-voltage = <1000000>;
457				rohm,dvs-idle-voltage = <900000>;
458			};
459
460			/* vdd_0p9: 0.805-1.0V (typ=0.9V) */
461			BUCK3 {
462				regulator-name = "buck3";
463				regulator-min-microvolt = <700000>;
464				regulator-max-microvolt = <1350000>;
465				regulator-boot-on;
466				regulator-always-on;
467			};
468
469			/* vdd_3p3 */
470			BUCK4 {
471				regulator-name = "buck4";
472				regulator-min-microvolt = <3000000>;
473				regulator-max-microvolt = <3300000>;
474				regulator-boot-on;
475				regulator-always-on;
476			};
477
478			/* vdd_1p8 */
479			BUCK5 {
480				regulator-name = "buck5";
481				regulator-min-microvolt = <1605000>;
482				regulator-max-microvolt = <1995000>;
483				regulator-boot-on;
484				regulator-always-on;
485			};
486
487			/* vdd_dram */
488			BUCK6 {
489				regulator-name = "buck6";
490				regulator-min-microvolt = <800000>;
491				regulator-max-microvolt = <1400000>;
492				regulator-boot-on;
493				regulator-always-on;
494			};
495
496			/* nvcc_snvs_1p8 */
497			LDO1 {
498				regulator-name = "ldo1";
499				regulator-min-microvolt = <1600000>;
500				regulator-max-microvolt = <1900000>;
501				regulator-boot-on;
502				regulator-always-on;
503			};
504
505			/* vdd_snvs_0p8 */
506			LDO2 {
507				regulator-name = "ldo2";
508				regulator-min-microvolt = <800000>;
509				regulator-max-microvolt = <900000>;
510				regulator-boot-on;
511				regulator-always-on;
512			};
513
514			/* vdda_1p8 */
515			LDO3 {
516				regulator-name = "ldo3";
517				regulator-min-microvolt = <1800000>;
518				regulator-max-microvolt = <3300000>;
519				regulator-boot-on;
520				regulator-always-on;
521			};
522
523			LDO4 {
524				regulator-name = "ldo4";
525				regulator-min-microvolt = <900000>;
526				regulator-max-microvolt = <1800000>;
527				regulator-boot-on;
528				regulator-always-on;
529			};
530
531			LDO6 {
532				regulator-name = "ldo6";
533				regulator-min-microvolt = <900000>;
534				regulator-max-microvolt = <1800000>;
535				regulator-boot-on;
536				regulator-always-on;
537			};
538		};
539	};
540
541	eeprom@50 {
542		compatible = "atmel,24c02";
543		reg = <0x50>;
544		pagesize = <16>;
545	};
546
547	eeprom@51 {
548		compatible = "atmel,24c02";
549		reg = <0x51>;
550		pagesize = <16>;
551	};
552
553	eeprom@52 {
554		compatible = "atmel,24c02";
555		reg = <0x52>;
556		pagesize = <16>;
557	};
558
559	eeprom@53 {
560		compatible = "atmel,24c02";
561		reg = <0x53>;
562		pagesize = <16>;
563	};
564
565	rtc@68 {
566		compatible = "dallas,ds1672";
567		reg = <0x68>;
568	};
569};
570
571&i2c2 {
572	clock-frequency = <400000>;
573	pinctrl-names = "default", "gpio";
574	pinctrl-0 = <&pinctrl_i2c2>;
575	pinctrl-1 = <&pinctrl_i2c2_gpio>;
576	scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
577	sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
578	status = "okay";
579
580	accelerometer@19 {
581		compatible = "st,lis2de12";
582		pinctrl-names = "default";
583		pinctrl-0 = <&pinctrl_accel>;
584		reg = <0x19>;
585		st,drdy-int-pin = <1>;
586		interrupt-parent = <&gpio1>;
587		interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
588	};
589};
590
591/* off-board header */
592&i2c3 {
593	clock-frequency = <400000>;
594	pinctrl-names = "default", "gpio";
595	pinctrl-0 = <&pinctrl_i2c3>;
596	pinctrl-1 = <&pinctrl_i2c3_gpio>;
597	scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
598	sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
599	status = "okay";
600};
601
602/* off-board header */
603&i2c4 {
604	clock-frequency = <400000>;
605	pinctrl-names = "default", "gpio";
606	pinctrl-0 = <&pinctrl_i2c4>;
607	pinctrl-1 = <&pinctrl_i2c4_gpio>;
608	scl-gpios = <&gpio5 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
609	sda-gpios = <&gpio5 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
610	status = "okay";
611};
612
613&pgc_gpumix {
614	status = "disabled";
615};
616
617/* off-board header */
618&sai3 {
619	pinctrl-names = "default";
620	pinctrl-0 = <&pinctrl_sai3>;
621	assigned-clocks = <&clk IMX8MN_CLK_SAI3>;
622	assigned-clock-parents = <&clk IMX8MN_AUDIO_PLL1_OUT>;
623	assigned-clock-rates = <24576000>;
624	status = "okay";
625};
626
627/* RS232/RS485/RS422 selectable */
628&uart1 {
629	pinctrl-names = "default";
630	pinctrl-0 = <&pinctrl_uart1>, <&pinctrl_uart1_gpio>;
631	status = "okay";
632};
633
634/* RS232 console */
635&uart2 {
636	pinctrl-names = "default";
637	pinctrl-0 = <&pinctrl_uart2>;
638	status = "okay";
639};
640
641/* bluetooth HCI */
642&uart3 {
643	pinctrl-names = "default";
644	pinctrl-0 = <&pinctrl_uart3>, <&pinctrl_uart3_gpio>;
645	rts-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
646	cts-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
647	status = "okay";
648
649	bluetooth {
650		compatible = "brcm,bcm4330-bt";
651		shutdown-gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>;
652	};
653};
654
655/* LTE Cat M1/NB1/EGPRS modem or GPS (loading option) */
656&uart4 {
657	pinctrl-names = "default";
658	pinctrl-0 = <&pinctrl_uart4>;
659	status = "okay";
660};
661
662&usbotg1 {
663	dr_mode = "host";
664	vbus-supply = <&reg_usb1_vbus>;
665	disable-over-current;
666	status = "okay";
667};
668
669/* SDIO WiFi */
670&usdhc2 {
671	pinctrl-names = "default", "state_100mhz", "state_200mhz";
672	pinctrl-0 = <&pinctrl_usdhc2>;
673	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
674	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
675	bus-width = <4>;
676	non-removable;
677	vmmc-supply = <&reg_wifi>;
678	#address-cells = <1>;
679	#size-cells = <0>;
680	status = "okay";
681
682	wifi@0 {
683		compatible = "brcm,bcm43455-fmac", "brcm,bcm4329-fmac";
684		reg = <0>;
685	};
686};
687
688/* eMMC */
689&usdhc3 {
690	pinctrl-names = "default", "state_100mhz", "state_200mhz";
691	pinctrl-0 = <&pinctrl_usdhc3>;
692	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
693	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
694	bus-width = <8>;
695	non-removable;
696	status = "okay";
697};
698
699&wdog1 {
700	pinctrl-names = "default";
701	pinctrl-0 = <&pinctrl_wdog>;
702	fsl,ext-reset-output;
703	status = "okay";
704};
705
706&iomuxc {
707	pinctrl-names = "default";
708	pinctrl-0 = <&pinctrl_hog>;
709
710	pinctrl_hog: hoggrp {
711		fsl,pins = <
712			MX8MN_IOMUXC_NAND_CE0_B_GPIO3_IO1	0x40000159 /* M2_GDIS# */
713			MX8MN_IOMUXC_GPIO1_IO08_GPIO1_IO8	0x40000041 /* M2_PWR_EN */
714			MX8MN_IOMUXC_GPIO1_IO13_GPIO1_IO13	0x40000041 /* M2_RESET */
715			MX8MN_IOMUXC_NAND_DATA01_GPIO3_IO7	0x40000119 /* M2_OFF# */
716			MX8MN_IOMUXC_GPIO1_IO15_GPIO1_IO15	0x40000159 /* M2_WDIS# */
717			MX8MN_IOMUXC_SAI2_RXFS_GPIO4_IO21	0x40000041 /* APP GPIO1 */
718			MX8MN_IOMUXC_SAI2_RXC_GPIO4_IO22	0x40000041 /* VDD_4P0_EN */
719			MX8MN_IOMUXC_SAI2_MCLK_GPIO4_IO27	0x40000041 /* APP GPIO2 */
720			MX8MN_IOMUXC_SD1_DATA6_GPIO2_IO8	0x40000041 /* UART2_EN# */
721			MX8MN_IOMUXC_SAI3_RXFS_GPIO4_IO28	0x40000041 /* MIPI_GPIO1 */
722			MX8MN_IOMUXC_SPDIF_EXT_CLK_GPIO5_IO5	0x40000041 /* MIPI_GPIO2 */
723			MX8MN_IOMUXC_SPDIF_RX_GPIO5_IO4		0x40000041 /* MIPI_GPIO3/PWM2 */
724			MX8MN_IOMUXC_SPDIF_TX_GPIO5_IO3		0x40000041 /* MIPI_GPIO4/PWM3 */
725		>;
726	};
727
728	pinctrl_accel: accelgrp {
729		fsl,pins = <
730			MX8MN_IOMUXC_GPIO1_IO12_GPIO1_IO12	0x159
731		>;
732	};
733
734	pinctrl_fec1: fec1grp {
735		fsl,pins = <
736			MX8MN_IOMUXC_ENET_MDC_ENET1_MDC			0x3
737			MX8MN_IOMUXC_ENET_MDIO_ENET1_MDIO		0x3
738			MX8MN_IOMUXC_ENET_TD3_ENET1_RGMII_TD3		0x1f
739			MX8MN_IOMUXC_ENET_TD2_ENET1_RGMII_TD2		0x1f
740			MX8MN_IOMUXC_ENET_TD1_ENET1_RGMII_TD1		0x1f
741			MX8MN_IOMUXC_ENET_TD0_ENET1_RGMII_TD0		0x1f
742			MX8MN_IOMUXC_ENET_RD3_ENET1_RGMII_RD3		0x91
743			MX8MN_IOMUXC_ENET_RD2_ENET1_RGMII_RD2		0x91
744			MX8MN_IOMUXC_ENET_RD1_ENET1_RGMII_RD1		0x91
745			MX8MN_IOMUXC_ENET_RD0_ENET1_RGMII_RD0		0x91
746			MX8MN_IOMUXC_ENET_TXC_ENET1_RGMII_TXC		0x1f
747			MX8MN_IOMUXC_ENET_RXC_ENET1_RGMII_RXC		0x91
748			MX8MN_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
749			MX8MN_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
750			MX8MN_IOMUXC_GPIO1_IO10_GPIO1_IO10		0x19 /* RST# */
751			MX8MN_IOMUXC_GPIO1_IO11_GPIO1_IO11		0x19 /* IRQ# */
752		>;
753	};
754
755	pinctrl_gsc: gscgrp {
756		fsl,pins = <
757			MX8MN_IOMUXC_SD1_DATA4_GPIO2_IO6	0x40
758		>;
759	};
760
761	pinctrl_i2c1: i2c1grp {
762		fsl,pins = <
763			MX8MN_IOMUXC_I2C1_SCL_I2C1_SCL		0x400001c3
764			MX8MN_IOMUXC_I2C1_SDA_I2C1_SDA		0x400001c3
765		>;
766	};
767
768	pinctrl_i2c1_gpio: i2c1gpiogrp {
769		fsl,pins = <
770			MX8MN_IOMUXC_I2C1_SCL_GPIO5_IO14	0x400001c3
771			MX8MN_IOMUXC_I2C1_SDA_GPIO5_IO15	0x400001c3
772		>;
773	};
774
775	pinctrl_i2c2: i2c2grp {
776		fsl,pins = <
777			MX8MN_IOMUXC_I2C2_SCL_I2C2_SCL		0x400001c3
778			MX8MN_IOMUXC_I2C2_SDA_I2C2_SDA		0x400001c3
779		>;
780	};
781
782	pinctrl_i2c2_gpio: i2c2gpiogrp {
783		fsl,pins = <
784			MX8MN_IOMUXC_I2C2_SCL_GPIO5_IO16	0x400001c3
785			MX8MN_IOMUXC_I2C2_SDA_GPIO5_IO17	0x400001c3
786		>;
787	};
788
789	pinctrl_i2c3: i2c3grp {
790		fsl,pins = <
791			MX8MN_IOMUXC_I2C3_SCL_I2C3_SCL		0x400001c3
792			MX8MN_IOMUXC_I2C3_SDA_I2C3_SDA		0x400001c3
793		>;
794	};
795
796	pinctrl_i2c3_gpio: i2c3gpiogrp {
797		fsl,pins = <
798			MX8MN_IOMUXC_I2C3_SCL_GPIO5_IO18	0x400001c3
799			MX8MN_IOMUXC_I2C3_SDA_GPIO5_IO19	0x400001c3
800		>;
801	};
802
803	pinctrl_i2c4: i2c4grp {
804		fsl,pins = <
805			MX8MN_IOMUXC_I2C4_SCL_I2C4_SCL		0x400001c3
806			MX8MN_IOMUXC_I2C4_SDA_I2C4_SDA		0x400001c3
807		>;
808	};
809
810	pinctrl_i2c4_gpio: i2c4gpiogrp {
811		fsl,pins = <
812			MX8MN_IOMUXC_I2C4_SCL_GPIO5_IO20	0x400001c3
813			MX8MN_IOMUXC_I2C4_SDA_GPIO5_IO21	0x400001c3
814		>;
815	};
816
817	pinctrl_gpio_leds: gpioledgrp {
818		fsl,pins = <
819			MX8MN_IOMUXC_SAI5_RXD0_GPIO3_IO21	0x19
820			MX8MN_IOMUXC_SAI5_RXD2_GPIO3_IO23	0x19
821			MX8MN_IOMUXC_SAI5_RXD1_GPIO3_IO22	0x19
822			MX8MN_IOMUXC_SAI5_RXC_GPIO3_IO20	0x19
823			MX8MN_IOMUXC_SAI5_MCLK_GPIO3_IO25	0x19
824		>;
825	};
826
827	pinctrl_pmic: pmicgrp {
828		fsl,pins = <
829			MX8MN_IOMUXC_NAND_DATA02_GPIO3_IO8	0x41
830		>;
831	};
832
833	pinctrl_pps: ppsgrp {
834		fsl,pins = <
835			MX8MN_IOMUXC_SAI5_RXD3_GPIO3_IO24	0x141 /* PPS */
836		>;
837	};
838
839	pinctrl_reg_wl: regwlgrp {
840		fsl,pins = <
841			MX8MN_IOMUXC_SD2_RESET_B_GPIO2_IO19	0x41 /* WLAN_WLON */
842		>;
843	};
844
845	pinctrl_reg_usb1: regusb1grp {
846		fsl,pins = <
847			MX8MN_IOMUXC_SD1_DATA5_GPIO2_IO7	0x41
848		>;
849	};
850
851	pinctrl_sai3: sai3grp {
852		fsl,pins = <
853			MX8MN_IOMUXC_SAI3_MCLK_SAI3_MCLK	0xd6
854			MX8MN_IOMUXC_SAI3_RXD_SAI3_RX_DATA0	0xd6
855			MX8MN_IOMUXC_SAI3_TXC_SAI3_TX_BCLK	0xd6
856			MX8MN_IOMUXC_SAI3_TXD_SAI3_TX_DATA0	0xd6
857			MX8MN_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC	0xd6
858		>;
859	};
860
861	pinctrl_spi1: spi1grp {
862		fsl,pins = <
863			MX8MN_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK	0x82
864			MX8MN_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI	0x82
865			MX8MN_IOMUXC_ECSPI1_MISO_ECSPI1_MISO	0x82
866			MX8MN_IOMUXC_ECSPI1_SS0_GPIO5_IO9	0x40
867			MX8MN_IOMUXC_SD1_DATA1_GPIO2_IO3	0x140 /* CAN_IRQ# */
868		>;
869	};
870
871	pinctrl_spi2: spi2grp {
872		fsl,pins = <
873			MX8MN_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK	0x82
874			MX8MN_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI	0x82
875			MX8MN_IOMUXC_ECSPI2_MISO_ECSPI2_MISO	0x82
876			MX8MN_IOMUXC_ECSPI2_SS0_GPIO5_IO13	0x40 /* SS0 */
877		>;
878	};
879
880	pinctrl_uart1: uart1grp {
881		fsl,pins = <
882			MX8MN_IOMUXC_UART1_RXD_UART1_DCE_RX	0x140
883			MX8MN_IOMUXC_UART1_TXD_UART1_DCE_TX	0x140
884		>;
885	};
886
887	pinctrl_uart1_gpio: uart1gpiogrp {
888		fsl,pins = <
889			MX8MN_IOMUXC_SAI2_TXD0_GPIO4_IO26	0x40000110 /* HALF */
890			MX8MN_IOMUXC_SAI2_TXC_GPIO4_IO25	0x40000110 /* TERM */
891			MX8MN_IOMUXC_SAI2_RXD0_GPIO4_IO23	0x40000110 /* RS485 */
892		>;
893	};
894
895	pinctrl_uart2: uart2grp {
896		fsl,pins = <
897			MX8MN_IOMUXC_UART2_RXD_UART2_DCE_RX	0x140
898			MX8MN_IOMUXC_UART2_TXD_UART2_DCE_TX	0x140
899		>;
900	};
901
902	pinctrl_uart3_gpio: uart3_gpiogrp {
903		fsl,pins = <
904			MX8MN_IOMUXC_SD2_CD_B_GPIO2_IO12	0x41 /* BT_EN# */
905		>;
906	};
907
908	pinctrl_uart3: uart3grp {
909		fsl,pins = <
910			MX8MN_IOMUXC_UART3_RXD_UART3_DCE_RX	0x140
911			MX8MN_IOMUXC_UART3_TXD_UART3_DCE_TX	0x140
912			MX8MN_IOMUXC_SD1_CLK_GPIO2_IO0		0x140 /* CTS */
913			MX8MN_IOMUXC_SD1_CMD_GPIO2_IO1		0x140 /* RTS */
914		>;
915	};
916
917	pinctrl_uart4: uart4grp {
918		fsl,pins = <
919			MX8MN_IOMUXC_UART4_RXD_UART4_DCE_RX	0x140
920			MX8MN_IOMUXC_UART4_TXD_UART4_DCE_TX	0x140
921			MX8MN_IOMUXC_GPIO1_IO06_GPIO1_IO6	0x141 /* GNSS_GASP */
922		>;
923	};
924
925	pinctrl_usdhc2: usdhc2grp {
926		fsl,pins = <
927			MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK		0x190
928			MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d0
929			MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d0
930			MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d0
931			MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d0
932			MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d0
933		>;
934	};
935
936	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
937		fsl,pins = <
938			MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK		0x194
939			MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d4
940			MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d4
941			MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d4
942			MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d4
943			MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d4
944		>;
945	};
946
947	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
948		fsl,pins = <
949			MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK		0x196
950			MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d6
951			MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d6
952			MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d6
953			MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d6
954			MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d6
955		>;
956	};
957
958	pinctrl_usdhc3: usdhc3grp {
959		fsl,pins = <
960			MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK	0x190
961			MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD	0x1d0
962			MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0	0x1d0
963			MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1	0x1d0
964			MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2	0x1d0
965			MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3	0x1d0
966			MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4	0x1d0
967			MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5	0x1d0
968			MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6	0x1d0
969			MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7	0x1d0
970			MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE	0x190
971		>;
972	};
973
974	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
975		fsl,pins = <
976			MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK	0x194
977			MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD	0x1d4
978			MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0	0x1d4
979			MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1	0x1d4
980			MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2	0x1d4
981			MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3	0x1d4
982			MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4	0x1d4
983			MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5	0x1d4
984			MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6	0x1d4
985			MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7	0x1d4
986			MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE	0x194
987		>;
988	};
989
990	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
991		fsl,pins = <
992			MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK	0x196
993			MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD	0x1d6
994			MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0	0x1d6
995			MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1	0x1d6
996			MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2	0x1d6
997			MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3	0x1d6
998			MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4	0x1d6
999			MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5	0x1d6
1000			MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6	0x1d6
1001			MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7	0x1d6
1002			MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE	0x196
1003		>;
1004	};
1005
1006	pinctrl_wdog: wdoggrp {
1007		fsl,pins = <
1008			MX8MN_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B	0xc6
1009		>;
1010	};
1011};
1012