1// SPDX-License-Identifier: (GPL-2.0+ OR MIT) 2/* 3 * Copyright 2021 Gateworks Corporation 4 */ 5 6/dts-v1/; 7 8#include <dt-bindings/gpio/gpio.h> 9#include <dt-bindings/input/linux-event-codes.h> 10#include <dt-bindings/leds/common.h> 11#include <dt-bindings/net/ti-dp83867.h> 12 13#include "imx8mn.dtsi" 14 15/ { 16 model = "Gateworks Venice GW7902 i.MX8MN board"; 17 compatible = "gw,imx8mn-gw7902", "fsl,imx8mn"; 18 19 aliases { 20 usb0 = &usbotg1; 21 }; 22 23 chosen { 24 stdout-path = &uart2; 25 }; 26 27 memory@40000000 { 28 device_type = "memory"; 29 reg = <0x0 0x40000000 0 0x80000000>; 30 }; 31 32 can20m: can20m { 33 compatible = "fixed-clock"; 34 #clock-cells = <0>; 35 clock-frequency = <20000000>; 36 clock-output-names = "can20m"; 37 }; 38 39 gpio-keys { 40 compatible = "gpio-keys"; 41 42 key-user-pb { 43 label = "user_pb"; 44 gpios = <&gpio 2 GPIO_ACTIVE_LOW>; 45 linux,code = <BTN_0>; 46 }; 47 48 key-user-pb1x { 49 label = "user_pb1x"; 50 linux,code = <BTN_1>; 51 interrupt-parent = <&gsc>; 52 interrupts = <0>; 53 }; 54 55 key-erased { 56 label = "key_erased"; 57 linux,code = <BTN_2>; 58 interrupt-parent = <&gsc>; 59 interrupts = <1>; 60 }; 61 62 key-eeprom-wp { 63 label = "eeprom_wp"; 64 linux,code = <BTN_3>; 65 interrupt-parent = <&gsc>; 66 interrupts = <2>; 67 }; 68 69 key-tamper { 70 label = "tamper"; 71 linux,code = <BTN_4>; 72 interrupt-parent = <&gsc>; 73 interrupts = <5>; 74 }; 75 76 switch-hold { 77 label = "switch_hold"; 78 linux,code = <BTN_5>; 79 interrupt-parent = <&gsc>; 80 interrupts = <7>; 81 }; 82 }; 83 84 led-controller { 85 compatible = "gpio-leds"; 86 pinctrl-names = "default"; 87 pinctrl-0 = <&pinctrl_gpio_leds>; 88 89 led-0 { 90 function = LED_FUNCTION_STATUS; 91 color = <LED_COLOR_ID_GREEN>; 92 label = "panel1"; 93 gpios = <&gpio3 21 GPIO_ACTIVE_LOW>; 94 default-state = "off"; 95 }; 96 97 led-1 { 98 function = LED_FUNCTION_STATUS; 99 color = <LED_COLOR_ID_GREEN>; 100 label = "panel2"; 101 gpios = <&gpio3 23 GPIO_ACTIVE_LOW>; 102 default-state = "off"; 103 }; 104 105 led-2 { 106 function = LED_FUNCTION_STATUS; 107 color = <LED_COLOR_ID_GREEN>; 108 label = "panel3"; 109 gpios = <&gpio3 22 GPIO_ACTIVE_LOW>; 110 default-state = "off"; 111 }; 112 113 led-3 { 114 function = LED_FUNCTION_STATUS; 115 color = <LED_COLOR_ID_GREEN>; 116 label = "panel4"; 117 gpios = <&gpio3 20 GPIO_ACTIVE_LOW>; 118 default-state = "off"; 119 }; 120 121 led-4 { 122 function = LED_FUNCTION_STATUS; 123 color = <LED_COLOR_ID_GREEN>; 124 label = "panel5"; 125 gpios = <&gpio3 25 GPIO_ACTIVE_LOW>; 126 default-state = "off"; 127 }; 128 }; 129 130 pps { 131 compatible = "pps-gpio"; 132 pinctrl-names = "default"; 133 pinctrl-0 = <&pinctrl_pps>; 134 gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>; 135 status = "okay"; 136 }; 137 138 reg_3p3v: regulator-3p3v { 139 compatible = "regulator-fixed"; 140 regulator-name = "3P3V"; 141 regulator-min-microvolt = <3300000>; 142 regulator-max-microvolt = <3300000>; 143 regulator-always-on; 144 }; 145 146 reg_usb1_vbus: regulator-usb1 { 147 compatible = "regulator-fixed"; 148 pinctrl-names = "default"; 149 pinctrl-0 = <&pinctrl_reg_usb1>; 150 regulator-name = "usb_usb1_vbus"; 151 gpio = <&gpio2 7 GPIO_ACTIVE_HIGH>; 152 enable-active-high; 153 regulator-min-microvolt = <5000000>; 154 regulator-max-microvolt = <5000000>; 155 }; 156 157 reg_wifi: regulator-wifi { 158 compatible = "regulator-fixed"; 159 pinctrl-names = "default"; 160 pinctrl-0 = <&pinctrl_reg_wl>; 161 regulator-name = "wifi"; 162 gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; 163 enable-active-high; 164 startup-delay-us = <100>; 165 regulator-min-microvolt = <3300000>; 166 regulator-max-microvolt = <3300000>; 167 }; 168}; 169 170&A53_0 { 171 cpu-supply = <&buck2>; 172}; 173 174&A53_1 { 175 cpu-supply = <&buck2>; 176}; 177 178&A53_2 { 179 cpu-supply = <&buck2>; 180}; 181 182&A53_3 { 183 cpu-supply = <&buck2>; 184}; 185 186&ddrc { 187 operating-points-v2 = <&ddrc_opp_table>; 188 189 ddrc_opp_table: opp-table { 190 compatible = "operating-points-v2"; 191 192 opp-25000000 { 193 opp-hz = /bits/ 64 <25000000>; 194 }; 195 196 opp-100000000 { 197 opp-hz = /bits/ 64 <100000000>; 198 }; 199 200 opp-750000000 { 201 opp-hz = /bits/ 64 <750000000>; 202 }; 203 }; 204}; 205 206&ecspi1 { 207 pinctrl-names = "default"; 208 pinctrl-0 = <&pinctrl_spi1>; 209 cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>; 210 status = "okay"; 211 212 can@0 { 213 compatible = "microchip,mcp2515"; 214 reg = <0>; 215 clocks = <&can20m>; 216 interrupt-parent = <&gpio2>; 217 interrupts = <3 IRQ_TYPE_LEVEL_LOW>; 218 spi-max-frequency = <10000000>; 219 }; 220}; 221 222&disp_blk_ctrl { 223 status = "disabled"; 224}; 225 226/* off-board header */ 227&ecspi2 { 228 pinctrl-names = "default"; 229 pinctrl-0 = <&pinctrl_spi2>; 230 cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>; 231 status = "okay"; 232}; 233 234&fec1 { 235 pinctrl-names = "default"; 236 pinctrl-0 = <&pinctrl_fec1>; 237 phy-mode = "rgmii-id"; 238 phy-handle = <ðphy0>; 239 local-mac-address = [00 00 00 00 00 00]; 240 status = "okay"; 241 242 mdio { 243 #address-cells = <1>; 244 #size-cells = <0>; 245 246 ethphy0: ethernet-phy@0 { 247 compatible = "ethernet-phy-ieee802.3-c22"; 248 reg = <0>; 249 ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; 250 ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; 251 tx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; 252 rx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; 253 }; 254 }; 255}; 256 257&gpio1 { 258 gpio-line-names = "", "", "", "", "", "", "", "", 259 "m2_pwr_en", "", "", "", "", "m2_reset", "", "m2_wdis#", 260 "", "", "", "", "", "", "", "", 261 "", "", "", "", "", "", "", ""; 262}; 263 264&gpio2 { 265 gpio-line-names = "", "", "", "", "", "", "", "", 266 "uart2_en#", "", "", "", "", "", "", "", 267 "", "", "", "", "", "", "", "", 268 "", "", "", "", "", "", "", ""; 269}; 270 271&gpio3 { 272 gpio-line-names = "", "m2_gdis#", "", "", "", "", "", "m2_off#", 273 "", "", "", "", "", "", "", "", 274 "", "", "", "", "", "", "", "", 275 "", "", "", "", "", "", "", ""; 276}; 277 278&gpio4 { 279 gpio-line-names = "", "", "", "", "", "", "", "", 280 "", "", "", "", "", "", "", "", 281 "", "", "", "", "", "app_gpio1", "vdd_4p0_en", "uart1_rs485", 282 "", "uart1_term", "uart1_half", "app_gpio2", 283 "mipi_gpio1", "", "", ""; 284}; 285 286&gpio5 { 287 gpio-line-names = "", "", "", "mipi_gpio4", 288 "mipi_gpio3", "mipi_gpio2", "", "", 289 "", "", "", "", "", "", "", "", 290 "", "", "", "", "", "", "", "", 291 "", "", "", "", "", "", "", ""; 292}; 293 294&gpu { 295 status = "disabled"; 296}; 297 298&i2c1 { 299 clock-frequency = <100000>; 300 pinctrl-names = "default", "gpio"; 301 pinctrl-0 = <&pinctrl_i2c1>; 302 pinctrl-1 = <&pinctrl_i2c1_gpio>; 303 scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; 304 sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; 305 status = "okay"; 306 307 gsc: gsc@20 { 308 compatible = "gw,gsc"; 309 reg = <0x20>; 310 pinctrl-0 = <&pinctrl_gsc>; 311 interrupt-parent = <&gpio2>; 312 interrupts = <6 IRQ_TYPE_EDGE_FALLING>; 313 interrupt-controller; 314 #interrupt-cells = <1>; 315 316 adc { 317 compatible = "gw,gsc-adc"; 318 #address-cells = <1>; 319 #size-cells = <0>; 320 321 channel@6 { 322 gw,mode = <0>; 323 reg = <0x06>; 324 label = "temp"; 325 }; 326 327 channel@8 { 328 gw,mode = <1>; 329 reg = <0x08>; 330 label = "vdd_bat"; 331 }; 332 333 channel@82 { 334 gw,mode = <2>; 335 reg = <0x82>; 336 label = "vin"; 337 gw,voltage-divider-ohms = <22100 1000>; 338 gw,voltage-offset-microvolt = <700000>; 339 }; 340 341 channel@84 { 342 gw,mode = <2>; 343 reg = <0x84>; 344 label = "vin_4p0"; 345 gw,voltage-divider-ohms = <10000 10000>; 346 }; 347 348 channel@86 { 349 gw,mode = <2>; 350 reg = <0x86>; 351 label = "vdd_3p3"; 352 gw,voltage-divider-ohms = <10000 10000>; 353 }; 354 355 channel@88 { 356 gw,mode = <2>; 357 reg = <0x88>; 358 label = "vdd_0p9"; 359 }; 360 361 channel@8c { 362 gw,mode = <2>; 363 reg = <0x8c>; 364 label = "vdd_soc"; 365 }; 366 367 channel@8e { 368 gw,mode = <2>; 369 reg = <0x8e>; 370 label = "vdd_arm"; 371 }; 372 373 channel@90 { 374 gw,mode = <2>; 375 reg = <0x90>; 376 label = "vdd_1p8"; 377 }; 378 379 channel@92 { 380 gw,mode = <2>; 381 reg = <0x92>; 382 label = "vdd_dram"; 383 }; 384 385 channel@98 { 386 gw,mode = <2>; 387 reg = <0x98>; 388 label = "vdd_1p0"; 389 }; 390 391 channel@9a { 392 gw,mode = <2>; 393 reg = <0x9a>; 394 label = "vdd_2p5"; 395 gw,voltage-divider-ohms = <10000 10000>; 396 }; 397 398 channel@9c { 399 gw,mode = <2>; 400 reg = <0x9c>; 401 label = "vdd_5p0"; 402 gw,voltage-divider-ohms = <10000 10000>; 403 }; 404 405 channel@a2 { 406 gw,mode = <2>; 407 reg = <0xa2>; 408 label = "vdd_gsc"; 409 gw,voltage-divider-ohms = <10000 10000>; 410 }; 411 }; 412 }; 413 414 gpio: gpio@23 { 415 compatible = "nxp,pca9555"; 416 reg = <0x23>; 417 gpio-controller; 418 #gpio-cells = <2>; 419 interrupt-parent = <&gsc>; 420 interrupts = <4>; 421 }; 422 423 pmic@4b { 424 compatible = "rohm,bd71847"; 425 reg = <0x4b>; 426 pinctrl-names = "default"; 427 pinctrl-0 = <&pinctrl_pmic>; 428 interrupt-parent = <&gpio3>; 429 interrupts = <8 IRQ_TYPE_LEVEL_LOW>; 430 rohm,reset-snvs-powered; 431 #clock-cells = <0>; 432 clocks = <&osc_32k 0>; 433 clock-output-names = "clk-32k-out"; 434 435 regulators { 436 /* vdd_soc: 0.805-0.900V (typ=0.8V) */ 437 BUCK1 { 438 regulator-name = "buck1"; 439 regulator-min-microvolt = <700000>; 440 regulator-max-microvolt = <1300000>; 441 regulator-boot-on; 442 regulator-always-on; 443 regulator-ramp-delay = <1250>; 444 }; 445 446 /* vdd_arm: 0.805-1.0V (typ=0.9V) */ 447 buck2: BUCK2 { 448 regulator-name = "buck2"; 449 regulator-min-microvolt = <700000>; 450 regulator-max-microvolt = <1300000>; 451 regulator-boot-on; 452 regulator-always-on; 453 regulator-ramp-delay = <1250>; 454 rohm,dvs-run-voltage = <1000000>; 455 rohm,dvs-idle-voltage = <900000>; 456 }; 457 458 /* vdd_0p9: 0.805-1.0V (typ=0.9V) */ 459 BUCK3 { 460 regulator-name = "buck3"; 461 regulator-min-microvolt = <700000>; 462 regulator-max-microvolt = <1350000>; 463 regulator-boot-on; 464 regulator-always-on; 465 }; 466 467 /* vdd_3p3 */ 468 BUCK4 { 469 regulator-name = "buck4"; 470 regulator-min-microvolt = <3000000>; 471 regulator-max-microvolt = <3300000>; 472 regulator-boot-on; 473 regulator-always-on; 474 }; 475 476 /* vdd_1p8 */ 477 BUCK5 { 478 regulator-name = "buck5"; 479 regulator-min-microvolt = <1605000>; 480 regulator-max-microvolt = <1995000>; 481 regulator-boot-on; 482 regulator-always-on; 483 }; 484 485 /* vdd_dram */ 486 BUCK6 { 487 regulator-name = "buck6"; 488 regulator-min-microvolt = <800000>; 489 regulator-max-microvolt = <1400000>; 490 regulator-boot-on; 491 regulator-always-on; 492 }; 493 494 /* nvcc_snvs_1p8 */ 495 LDO1 { 496 regulator-name = "ldo1"; 497 regulator-min-microvolt = <1600000>; 498 regulator-max-microvolt = <1900000>; 499 regulator-boot-on; 500 regulator-always-on; 501 }; 502 503 /* vdd_snvs_0p8 */ 504 LDO2 { 505 regulator-name = "ldo2"; 506 regulator-min-microvolt = <800000>; 507 regulator-max-microvolt = <900000>; 508 regulator-boot-on; 509 regulator-always-on; 510 }; 511 512 /* vdda_1p8 */ 513 LDO3 { 514 regulator-name = "ldo3"; 515 regulator-min-microvolt = <1800000>; 516 regulator-max-microvolt = <3300000>; 517 regulator-boot-on; 518 regulator-always-on; 519 }; 520 521 LDO4 { 522 regulator-name = "ldo4"; 523 regulator-min-microvolt = <900000>; 524 regulator-max-microvolt = <1800000>; 525 regulator-boot-on; 526 regulator-always-on; 527 }; 528 529 LDO6 { 530 regulator-name = "ldo6"; 531 regulator-min-microvolt = <900000>; 532 regulator-max-microvolt = <1800000>; 533 regulator-boot-on; 534 regulator-always-on; 535 }; 536 }; 537 }; 538 539 eeprom@50 { 540 compatible = "atmel,24c02"; 541 reg = <0x50>; 542 pagesize = <16>; 543 }; 544 545 eeprom@51 { 546 compatible = "atmel,24c02"; 547 reg = <0x51>; 548 pagesize = <16>; 549 }; 550 551 eeprom@52 { 552 compatible = "atmel,24c02"; 553 reg = <0x52>; 554 pagesize = <16>; 555 }; 556 557 eeprom@53 { 558 compatible = "atmel,24c02"; 559 reg = <0x53>; 560 pagesize = <16>; 561 }; 562 563 rtc@68 { 564 compatible = "dallas,ds1672"; 565 reg = <0x68>; 566 }; 567}; 568 569&i2c2 { 570 clock-frequency = <400000>; 571 pinctrl-names = "default", "gpio"; 572 pinctrl-0 = <&pinctrl_i2c2>; 573 pinctrl-1 = <&pinctrl_i2c2_gpio>; 574 scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; 575 sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; 576 status = "okay"; 577 578 accelerometer@19 { 579 compatible = "st,lis2de12"; 580 pinctrl-names = "default"; 581 pinctrl-0 = <&pinctrl_accel>; 582 reg = <0x19>; 583 st,drdy-int-pin = <1>; 584 interrupt-parent = <&gpio1>; 585 interrupts = <12 IRQ_TYPE_LEVEL_LOW>; 586 interrupt-names = "INT1"; 587 }; 588}; 589 590/* off-board header */ 591&i2c3 { 592 clock-frequency = <400000>; 593 pinctrl-names = "default", "gpio"; 594 pinctrl-0 = <&pinctrl_i2c3>; 595 pinctrl-1 = <&pinctrl_i2c3_gpio>; 596 scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; 597 sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; 598 status = "okay"; 599}; 600 601/* off-board header */ 602&i2c4 { 603 clock-frequency = <400000>; 604 pinctrl-names = "default", "gpio"; 605 pinctrl-0 = <&pinctrl_i2c4>; 606 pinctrl-1 = <&pinctrl_i2c4_gpio>; 607 scl-gpios = <&gpio5 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; 608 sda-gpios = <&gpio5 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; 609 status = "okay"; 610}; 611 612&pgc_gpumix { 613 status = "disabled"; 614}; 615 616/* off-board header */ 617&sai3 { 618 pinctrl-names = "default"; 619 pinctrl-0 = <&pinctrl_sai3>; 620 assigned-clocks = <&clk IMX8MN_CLK_SAI3>; 621 assigned-clock-parents = <&clk IMX8MN_AUDIO_PLL1_OUT>; 622 assigned-clock-rates = <24576000>; 623 status = "okay"; 624}; 625 626/* RS232/RS485/RS422 selectable */ 627&uart1 { 628 pinctrl-names = "default"; 629 pinctrl-0 = <&pinctrl_uart1>, <&pinctrl_uart1_gpio>; 630 status = "okay"; 631}; 632 633/* RS232 console */ 634&uart2 { 635 pinctrl-names = "default"; 636 pinctrl-0 = <&pinctrl_uart2>; 637 status = "okay"; 638}; 639 640/* bluetooth HCI */ 641&uart3 { 642 pinctrl-names = "default"; 643 pinctrl-0 = <&pinctrl_uart3>, <&pinctrl_uart3_gpio>; 644 rts-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; 645 cts-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; 646 uart-has-rtscts; 647 status = "okay"; 648 649 bluetooth { 650 compatible = "brcm,bcm4330-bt"; 651 shutdown-gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>; 652 }; 653}; 654 655/* LTE Cat M1/NB1/EGPRS modem or GPS (loading option) */ 656&uart4 { 657 pinctrl-names = "default"; 658 pinctrl-0 = <&pinctrl_uart4>; 659 status = "okay"; 660}; 661 662&usbotg1 { 663 dr_mode = "host"; 664 vbus-supply = <®_usb1_vbus>; 665 disable-over-current; 666 status = "okay"; 667}; 668 669/* SDIO WiFi */ 670&usdhc2 { 671 pinctrl-names = "default"; 672 pinctrl-0 = <&pinctrl_usdhc2>; 673 bus-width = <4>; 674 non-removable; 675 vmmc-supply = <®_wifi>; 676 status = "okay"; 677}; 678 679/* eMMC */ 680&usdhc3 { 681 pinctrl-names = "default", "state_100mhz", "state_200mhz"; 682 pinctrl-0 = <&pinctrl_usdhc3>; 683 pinctrl-1 = <&pinctrl_usdhc3_100mhz>; 684 pinctrl-2 = <&pinctrl_usdhc3_200mhz>; 685 bus-width = <8>; 686 non-removable; 687 status = "okay"; 688}; 689 690&wdog1 { 691 pinctrl-names = "default"; 692 pinctrl-0 = <&pinctrl_wdog>; 693 fsl,ext-reset-output; 694 status = "okay"; 695}; 696 697&iomuxc { 698 pinctrl-names = "default"; 699 pinctrl-0 = <&pinctrl_hog>; 700 701 pinctrl_hog: hoggrp { 702 fsl,pins = < 703 MX8MN_IOMUXC_NAND_CE0_B_GPIO3_IO1 0x40000159 /* M2_GDIS# */ 704 MX8MN_IOMUXC_GPIO1_IO08_GPIO1_IO8 0x40000041 /* M2_PWR_EN */ 705 MX8MN_IOMUXC_GPIO1_IO13_GPIO1_IO13 0x40000041 /* M2_RESET */ 706 MX8MN_IOMUXC_NAND_DATA01_GPIO3_IO7 0x40000119 /* M2_OFF# */ 707 MX8MN_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x40000159 /* M2_WDIS# */ 708 MX8MN_IOMUXC_SAI2_RXFS_GPIO4_IO21 0x40000041 /* APP GPIO1 */ 709 MX8MN_IOMUXC_SAI2_RXC_GPIO4_IO22 0x40000041 /* VDD_4P0_EN */ 710 MX8MN_IOMUXC_SAI2_MCLK_GPIO4_IO27 0x40000041 /* APP GPIO2 */ 711 MX8MN_IOMUXC_SD1_DATA6_GPIO2_IO8 0x40000041 /* UART2_EN# */ 712 MX8MN_IOMUXC_SAI3_RXFS_GPIO4_IO28 0x40000041 /* MIPI_GPIO1 */ 713 MX8MN_IOMUXC_SPDIF_EXT_CLK_GPIO5_IO5 0x40000041 /* MIPI_GPIO2 */ 714 MX8MN_IOMUXC_SPDIF_RX_GPIO5_IO4 0x40000041 /* MIPI_GPIO3/PWM2 */ 715 MX8MN_IOMUXC_SPDIF_TX_GPIO5_IO3 0x40000041 /* MIPI_GPIO4/PWM3 */ 716 >; 717 }; 718 719 pinctrl_accel: accelgrp { 720 fsl,pins = < 721 MX8MN_IOMUXC_GPIO1_IO12_GPIO1_IO12 0x159 722 >; 723 }; 724 725 pinctrl_fec1: fec1grp { 726 fsl,pins = < 727 MX8MN_IOMUXC_ENET_MDC_ENET1_MDC 0x3 728 MX8MN_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3 729 MX8MN_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f 730 MX8MN_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f 731 MX8MN_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f 732 MX8MN_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f 733 MX8MN_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91 734 MX8MN_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91 735 MX8MN_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91 736 MX8MN_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91 737 MX8MN_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f 738 MX8MN_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91 739 MX8MN_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91 740 MX8MN_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f 741 MX8MN_IOMUXC_GPIO1_IO10_GPIO1_IO10 0x19 /* RST# */ 742 MX8MN_IOMUXC_GPIO1_IO11_GPIO1_IO11 0x19 /* IRQ# */ 743 >; 744 }; 745 746 pinctrl_gsc: gscgrp { 747 fsl,pins = < 748 MX8MN_IOMUXC_SD1_DATA4_GPIO2_IO6 0x40 749 >; 750 }; 751 752 pinctrl_i2c1: i2c1grp { 753 fsl,pins = < 754 MX8MN_IOMUXC_I2C1_SCL_I2C1_SCL 0x400001c3 755 MX8MN_IOMUXC_I2C1_SDA_I2C1_SDA 0x400001c3 756 >; 757 }; 758 759 pinctrl_i2c1_gpio: i2c1gpiogrp { 760 fsl,pins = < 761 MX8MN_IOMUXC_I2C1_SCL_GPIO5_IO14 0x400001c3 762 MX8MN_IOMUXC_I2C1_SDA_GPIO5_IO15 0x400001c3 763 >; 764 }; 765 766 pinctrl_i2c2: i2c2grp { 767 fsl,pins = < 768 MX8MN_IOMUXC_I2C2_SCL_I2C2_SCL 0x400001c3 769 MX8MN_IOMUXC_I2C2_SDA_I2C2_SDA 0x400001c3 770 >; 771 }; 772 773 pinctrl_i2c2_gpio: i2c2gpiogrp { 774 fsl,pins = < 775 MX8MN_IOMUXC_I2C2_SCL_GPIO5_IO16 0x400001c3 776 MX8MN_IOMUXC_I2C2_SDA_GPIO5_IO17 0x400001c3 777 >; 778 }; 779 780 pinctrl_i2c3: i2c3grp { 781 fsl,pins = < 782 MX8MN_IOMUXC_I2C3_SCL_I2C3_SCL 0x400001c3 783 MX8MN_IOMUXC_I2C3_SDA_I2C3_SDA 0x400001c3 784 >; 785 }; 786 787 pinctrl_i2c3_gpio: i2c3gpiogrp { 788 fsl,pins = < 789 MX8MN_IOMUXC_I2C3_SCL_GPIO5_IO18 0x400001c3 790 MX8MN_IOMUXC_I2C3_SDA_GPIO5_IO19 0x400001c3 791 >; 792 }; 793 794 pinctrl_i2c4: i2c4grp { 795 fsl,pins = < 796 MX8MN_IOMUXC_I2C4_SCL_I2C4_SCL 0x400001c3 797 MX8MN_IOMUXC_I2C4_SDA_I2C4_SDA 0x400001c3 798 >; 799 }; 800 801 pinctrl_i2c4_gpio: i2c4gpiogrp { 802 fsl,pins = < 803 MX8MN_IOMUXC_I2C4_SCL_GPIO5_IO20 0x400001c3 804 MX8MN_IOMUXC_I2C4_SDA_GPIO5_IO21 0x400001c3 805 >; 806 }; 807 808 pinctrl_gpio_leds: gpioledgrp { 809 fsl,pins = < 810 MX8MN_IOMUXC_SAI5_RXD0_GPIO3_IO21 0x19 811 MX8MN_IOMUXC_SAI5_RXD2_GPIO3_IO23 0x19 812 MX8MN_IOMUXC_SAI5_RXD1_GPIO3_IO22 0x19 813 MX8MN_IOMUXC_SAI5_RXC_GPIO3_IO20 0x19 814 MX8MN_IOMUXC_SAI5_MCLK_GPIO3_IO25 0x19 815 >; 816 }; 817 818 pinctrl_pmic: pmicgrp { 819 fsl,pins = < 820 MX8MN_IOMUXC_NAND_DATA02_GPIO3_IO8 0x41 821 >; 822 }; 823 824 pinctrl_pps: ppsgrp { 825 fsl,pins = < 826 MX8MN_IOMUXC_SAI5_RXD3_GPIO3_IO24 0x141 /* PPS */ 827 >; 828 }; 829 830 pinctrl_reg_wl: regwlgrp { 831 fsl,pins = < 832 MX8MN_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x41 /* WLAN_WLON */ 833 >; 834 }; 835 836 pinctrl_reg_usb1: regusb1grp { 837 fsl,pins = < 838 MX8MN_IOMUXC_SD1_DATA5_GPIO2_IO7 0x41 839 >; 840 }; 841 842 pinctrl_sai3: sai3grp { 843 fsl,pins = < 844 MX8MN_IOMUXC_SAI3_MCLK_SAI3_MCLK 0xd6 845 MX8MN_IOMUXC_SAI3_RXD_SAI3_RX_DATA0 0xd6 846 MX8MN_IOMUXC_SAI3_TXC_SAI3_TX_BCLK 0xd6 847 MX8MN_IOMUXC_SAI3_TXD_SAI3_TX_DATA0 0xd6 848 MX8MN_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC 0xd6 849 >; 850 }; 851 852 pinctrl_spi1: spi1grp { 853 fsl,pins = < 854 MX8MN_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK 0x82 855 MX8MN_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI 0x82 856 MX8MN_IOMUXC_ECSPI1_MISO_ECSPI1_MISO 0x82 857 MX8MN_IOMUXC_ECSPI1_SS0_GPIO5_IO9 0x40 858 MX8MN_IOMUXC_SD1_DATA1_GPIO2_IO3 0x140 /* CAN_IRQ# */ 859 >; 860 }; 861 862 pinctrl_spi2: spi2grp { 863 fsl,pins = < 864 MX8MN_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0x82 865 MX8MN_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0x82 866 MX8MN_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0x82 867 MX8MN_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0x40 /* SS0 */ 868 >; 869 }; 870 871 pinctrl_uart1: uart1grp { 872 fsl,pins = < 873 MX8MN_IOMUXC_UART1_RXD_UART1_DCE_RX 0x140 874 MX8MN_IOMUXC_UART1_TXD_UART1_DCE_TX 0x140 875 >; 876 }; 877 878 pinctrl_uart1_gpio: uart1gpiogrp { 879 fsl,pins = < 880 MX8MN_IOMUXC_SAI2_TXD0_GPIO4_IO26 0x40000110 /* HALF */ 881 MX8MN_IOMUXC_SAI2_TXC_GPIO4_IO25 0x40000110 /* TERM */ 882 MX8MN_IOMUXC_SAI2_RXD0_GPIO4_IO23 0x40000110 /* RS485 */ 883 >; 884 }; 885 886 pinctrl_uart2: uart2grp { 887 fsl,pins = < 888 MX8MN_IOMUXC_UART2_RXD_UART2_DCE_RX 0x140 889 MX8MN_IOMUXC_UART2_TXD_UART2_DCE_TX 0x140 890 >; 891 }; 892 893 pinctrl_uart3_gpio: uart3_gpiogrp { 894 fsl,pins = < 895 MX8MN_IOMUXC_SD2_CD_B_GPIO2_IO12 0x41 /* BT_EN# */ 896 >; 897 }; 898 899 pinctrl_uart3: uart3grp { 900 fsl,pins = < 901 MX8MN_IOMUXC_UART3_RXD_UART3_DCE_RX 0x140 902 MX8MN_IOMUXC_UART3_TXD_UART3_DCE_TX 0x140 903 MX8MN_IOMUXC_SD1_CLK_GPIO2_IO0 0x140 /* CTS */ 904 MX8MN_IOMUXC_SD1_CMD_GPIO2_IO1 0x140 /* RTS */ 905 >; 906 }; 907 908 pinctrl_uart4: uart4grp { 909 fsl,pins = < 910 MX8MN_IOMUXC_UART4_RXD_UART4_DCE_RX 0x140 911 MX8MN_IOMUXC_UART4_TXD_UART4_DCE_TX 0x140 912 MX8MN_IOMUXC_GPIO1_IO06_GPIO1_IO6 0x141 /* GNSS_GASP */ 913 >; 914 }; 915 916 pinctrl_usdhc2: usdhc2grp { 917 fsl,pins = < 918 MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK 0x190 919 MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d0 920 MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d0 921 MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0 922 MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0 923 MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0 924 >; 925 }; 926 927 pinctrl_usdhc3: usdhc3grp { 928 fsl,pins = < 929 MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK 0x190 930 MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d0 931 MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d0 932 MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d0 933 MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d0 934 MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d0 935 MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d0 936 MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d0 937 MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d0 938 MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d0 939 MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x190 940 >; 941 }; 942 943 pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp { 944 fsl,pins = < 945 MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK 0x194 946 MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d4 947 MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d4 948 MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d4 949 MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d4 950 MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d4 951 MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d4 952 MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d4 953 MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d4 954 MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d4 955 MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x194 956 >; 957 }; 958 959 pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp { 960 fsl,pins = < 961 MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK 0x196 962 MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d6 963 MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d6 964 MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d6 965 MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d6 966 MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d6 967 MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d6 968 MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d6 969 MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d6 970 MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d6 971 MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x196 972 >; 973 }; 974 975 pinctrl_wdog: wdoggrp { 976 fsl,pins = < 977 MX8MN_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6 978 >; 979 }; 980}; 981