xref: /linux/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dts (revision c532de5a67a70f8533d495f8f2aaa9a0491c3ad0)
1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2/*
3 * Copyright 2022 Gateworks Corporation
4 */
5
6/dts-v1/;
7
8#include <dt-bindings/gpio/gpio.h>
9#include <dt-bindings/input/linux-event-codes.h>
10#include <dt-bindings/leds/common.h>
11#include <dt-bindings/phy/phy-imx8-pcie.h>
12
13#include "imx8mm.dtsi"
14
15/ {
16	model = "Gateworks Venice GW7903 i.MX8MM board";
17	compatible = "gw,imx8mm-gw7903", "fsl,imx8mm";
18
19	aliases {
20		ethernet0 = &fec1;
21		usb0 = &usbotg1;
22	};
23
24	chosen {
25		stdout-path = &uart2;
26	};
27
28	memory@40000000 {
29		device_type = "memory";
30		reg = <0x0 0x40000000 0 0x80000000>;
31	};
32
33	gpio-keys {
34		compatible = "gpio-keys";
35
36		key-user-pb {
37			label = "user_pb";
38			gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
39			linux,code = <BTN_0>;
40		};
41
42		key-user-pb1x {
43			label = "user_pb1x";
44			linux,code = <BTN_1>;
45			interrupt-parent = <&gsc>;
46			interrupts = <0>;
47		};
48
49		key-erased {
50			label = "key_erased";
51			linux,code = <BTN_2>;
52			interrupt-parent = <&gsc>;
53			interrupts = <1>;
54		};
55
56		key-eeprom-wp {
57			label = "eeprom_wp";
58			linux,code = <BTN_3>;
59			interrupt-parent = <&gsc>;
60			interrupts = <2>;
61		};
62
63		switch-hold {
64			label = "switch_hold";
65			linux,code = <BTN_5>;
66			interrupt-parent = <&gsc>;
67			interrupts = <7>;
68		};
69	};
70
71	led-controller {
72		compatible = "gpio-leds";
73		pinctrl-names = "default";
74		pinctrl-0 = <&pinctrl_gpio_leds>;
75
76		led-0 {
77			function = LED_FUNCTION_STATUS;
78			color = <LED_COLOR_ID_RED>;
79			label = "led01_red";
80			gpios = <&gpio5 5 GPIO_ACTIVE_HIGH>;
81			default-state = "off";
82		};
83
84		led-1 {
85			function = LED_FUNCTION_STATUS;
86			color = <LED_COLOR_ID_GREEN>;
87			label = "led01_grn";
88			gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>;
89			default-state = "off";
90		};
91
92		led-2 {
93			function = LED_FUNCTION_STATUS;
94			color = <LED_COLOR_ID_RED>;
95			label = "led02_red";
96			gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;
97			default-state = "off";
98		};
99
100		led-3 {
101			function = LED_FUNCTION_STATUS;
102			color = <LED_COLOR_ID_GREEN>;
103			label = "led02_grn";
104			gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
105			default-state = "off";
106		};
107
108		led-4 {
109			function = LED_FUNCTION_STATUS;
110			color = <LED_COLOR_ID_RED>;
111			label = "led03_red";
112			gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
113			default-state = "off";
114		};
115
116		led-5 {
117			function = LED_FUNCTION_STATUS;
118			color = <LED_COLOR_ID_GREEN>;
119			label = "led03_grn";
120			gpios = <&gpio5 3 GPIO_ACTIVE_HIGH>;
121			default-state = "off";
122		};
123
124		led-6 {
125			function = LED_FUNCTION_STATUS;
126			color = <LED_COLOR_ID_RED>;
127			label = "led04_red";
128			gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>;
129			default-state = "off";
130		};
131
132		led-7 {
133			function = LED_FUNCTION_STATUS;
134			color = <LED_COLOR_ID_GREEN>;
135			label = "led04_grn";
136			gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>;
137			default-state = "off";
138		};
139
140		led-8 {
141			function = LED_FUNCTION_STATUS;
142			color = <LED_COLOR_ID_RED>;
143			label = "led05_red";
144			gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
145			default-state = "off";
146		};
147
148		led-9 {
149			function = LED_FUNCTION_STATUS;
150			color = <LED_COLOR_ID_GREEN>;
151			label = "led05_grn";
152			gpios = <&gpio4 31 GPIO_ACTIVE_HIGH>;
153			default-state = "off";
154		};
155
156		led-a {
157			function = LED_FUNCTION_STATUS;
158			color = <LED_COLOR_ID_RED>;
159			label = "led06_red";
160			gpios = <&gpio5 4 GPIO_ACTIVE_HIGH>;
161			default-state = "off";
162		};
163
164		led-b {
165			function = LED_FUNCTION_STATUS;
166			color = <LED_COLOR_ID_GREEN>;
167			label = "led06_grn";
168			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
169			default-state = "off";
170		};
171	};
172
173	pcie0_refclk: pcie0-refclk {
174		compatible = "fixed-clock";
175		#clock-cells = <0>;
176		clock-frequency = <100000000>;
177	};
178
179	reg_3p3v: regulator-3p3v {
180		compatible = "regulator-fixed";
181		regulator-name = "3P3V";
182		regulator-min-microvolt = <3300000>;
183		regulator-max-microvolt = <3300000>;
184		regulator-always-on;
185	};
186};
187
188&A53_0 {
189	cpu-supply = <&buck2>;
190};
191
192&A53_1 {
193	cpu-supply = <&buck2>;
194};
195
196&A53_2 {
197	cpu-supply = <&buck2>;
198};
199
200&A53_3 {
201	cpu-supply = <&buck2>;
202};
203
204&ddrc {
205	operating-points-v2 = <&ddrc_opp_table>;
206
207	ddrc_opp_table: opp-table {
208		compatible = "operating-points-v2";
209
210		opp-25000000 {
211			opp-hz = /bits/ 64 <25000000>;
212		};
213
214		opp-100000000 {
215			opp-hz = /bits/ 64 <100000000>;
216		};
217
218		opp-750000000 {
219			opp-hz = /bits/ 64 <750000000>;
220		};
221	};
222};
223
224&fec1 {
225	pinctrl-names = "default";
226	pinctrl-0 = <&pinctrl_fec1>;
227	phy-mode = "rgmii-id";
228	phy-handle = <&ethphy0>;
229	local-mac-address = [00 00 00 00 00 00];
230	status = "okay";
231
232	mdio {
233		#address-cells = <1>;
234		#size-cells = <0>;
235
236		ethphy0: ethernet-phy@0 {
237			compatible = "ethernet-phy-ieee802.3-c22";
238			reg = <0>;
239			rx-internal-delay-ps = <2000>;
240			tx-internal-delay-ps = <2500>;
241		};
242	};
243};
244
245&gpio1 {
246	gpio-line-names = "", "", "", "", "", "", "", "",
247		"", "", "rs422_en#", "rs485_en#", "rs232_en#", "", "", "",
248		"", "", "", "", "", "", "", "",
249		"", "", "", "", "", "", "", "";
250};
251
252&gpio2 {
253	gpio-line-names = "dig2_in", "dig2_out#", "dig2_ctl", "", "", "", "dig1_ctl", "",
254		"dig1_out#", "dig1_in", "", "", "", "", "", "",
255		"", "", "", "", "", "", "", "",
256		"", "", "", "", "", "", "", "";
257};
258
259&gpio5 {
260	gpio-line-names = "", "", "", "", "", "", "", "sim1_det#",
261		"sim2_det#", "sim2_sel", "", "", "pci_wdis#", "", "", "",
262		"", "", "", "", "", "", "", "",
263		"", "", "", "", "", "", "", "";
264};
265
266&i2c1 {
267	clock-frequency = <100000>;
268	pinctrl-names = "default", "gpio";
269	pinctrl-0 = <&pinctrl_i2c1>;
270	pinctrl-1 = <&pinctrl_i2c1_gpio>;
271	scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
272	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
273	status = "okay";
274
275	gsc: gsc@20 {
276		compatible = "gw,gsc";
277		reg = <0x20>;
278		pinctrl-0 = <&pinctrl_gsc>;
279		interrupt-parent = <&gpio4>;
280		interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
281		interrupt-controller;
282		#interrupt-cells = <1>;
283		#address-cells = <1>;
284		#size-cells = <0>;
285
286		adc {
287			compatible = "gw,gsc-adc";
288			#address-cells = <1>;
289			#size-cells = <0>;
290
291			channel@6 {
292				gw,mode = <0>;
293				reg = <0x06>;
294				label = "temp";
295			};
296
297			channel@8 {
298				gw,mode = <3>;
299				reg = <0x08>;
300				label = "vdd_bat";
301			};
302
303			channel@82 {
304				gw,mode = <2>;
305				reg = <0x82>;
306				label = "vin";
307				gw,voltage-divider-ohms = <22100 1000>;
308				gw,voltage-offset-microvolt = <700000>;
309			};
310
311			channel@84 {
312				gw,mode = <2>;
313				reg = <0x84>;
314				label = "vdd_5p0";
315				gw,voltage-divider-ohms = <10000 10000>;
316			};
317
318			channel@86 {
319				gw,mode = <2>;
320				reg = <0x86>;
321				label = "vdd_3p3";
322				gw,voltage-divider-ohms = <10000 10000>;
323			};
324
325			channel@88 {
326				gw,mode = <2>;
327				reg = <0x88>;
328				label = "vdd_0p9";
329			};
330
331			channel@8c {
332				gw,mode = <2>;
333				reg = <0x8c>;
334				label = "vdd_soc";
335			};
336
337			channel@8e {
338				gw,mode = <2>;
339				reg = <0x8e>;
340				label = "vdd_arm";
341			};
342
343			channel@90 {
344				gw,mode = <2>;
345				reg = <0x90>;
346				label = "vdd_1p8";
347			};
348
349			channel@92 {
350				gw,mode = <2>;
351				reg = <0x92>;
352				label = "vdd_dram";
353			};
354
355			channel@a2 {
356				gw,mode = <2>;
357				reg = <0xa2>;
358				label = "vdd_gsc";
359				gw,voltage-divider-ohms = <10000 10000>;
360			};
361		};
362	};
363
364	gpio: gpio@23 {
365		compatible = "nxp,pca9555";
366		reg = <0x23>;
367		gpio-controller;
368		#gpio-cells = <2>;
369		interrupt-parent = <&gsc>;
370		interrupts = <4>;
371	};
372
373	eeprom@50 {
374		compatible = "atmel,24c02";
375		reg = <0x50>;
376		pagesize = <16>;
377	};
378
379	eeprom@51 {
380		compatible = "atmel,24c02";
381		reg = <0x51>;
382		pagesize = <16>;
383	};
384
385	eeprom@52 {
386		compatible = "atmel,24c02";
387		reg = <0x52>;
388		pagesize = <16>;
389	};
390
391	eeprom@53 {
392		compatible = "atmel,24c02";
393		reg = <0x53>;
394		pagesize = <16>;
395	};
396
397	rtc@68 {
398		compatible = "dallas,ds1672";
399		reg = <0x68>;
400	};
401};
402
403&i2c2 {
404	clock-frequency = <400000>;
405	pinctrl-names = "default", "gpio";
406	pinctrl-0 = <&pinctrl_i2c2>;
407	pinctrl-1 = <&pinctrl_i2c2_gpio>;
408	scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
409	sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
410	status = "okay";
411
412	pmic@4b {
413		compatible = "rohm,bd71847";
414		reg = <0x4b>;
415		pinctrl-names = "default";
416		pinctrl-0 = <&pinctrl_pmic>;
417		interrupt-parent = <&gpio3>;
418		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
419		rohm,reset-snvs-powered;
420		#clock-cells = <0>;
421		clocks = <&osc_32k>;
422		clock-output-names = "clk-32k-out";
423
424		regulators {
425			/* vdd_soc: 0.805-0.900V (typ=0.8V) */
426			BUCK1 {
427				regulator-name = "buck1";
428				regulator-min-microvolt = <700000>;
429				regulator-max-microvolt = <1300000>;
430				regulator-boot-on;
431				regulator-always-on;
432				regulator-ramp-delay = <1250>;
433			};
434
435			/* vdd_arm: 0.805-1.0V (typ=0.9V) */
436			buck2: BUCK2 {
437				regulator-name = "buck2";
438				regulator-min-microvolt = <700000>;
439				regulator-max-microvolt = <1300000>;
440				regulator-boot-on;
441				regulator-always-on;
442				regulator-ramp-delay = <1250>;
443				rohm,dvs-run-voltage = <1000000>;
444				rohm,dvs-idle-voltage = <900000>;
445			};
446
447			/* vdd_0p9: 0.805-1.0V (typ=0.9V) */
448			BUCK3 {
449				regulator-name = "buck3";
450				regulator-min-microvolt = <700000>;
451				regulator-max-microvolt = <1350000>;
452				regulator-boot-on;
453				regulator-always-on;
454			};
455
456			/* vdd_3p3 */
457			BUCK4 {
458				regulator-name = "buck4";
459				regulator-min-microvolt = <3000000>;
460				regulator-max-microvolt = <3300000>;
461				regulator-boot-on;
462				regulator-always-on;
463			};
464
465			/* vdd_1p8 */
466			BUCK5 {
467				regulator-name = "buck5";
468				regulator-min-microvolt = <1605000>;
469				regulator-max-microvolt = <1995000>;
470				regulator-boot-on;
471				regulator-always-on;
472			};
473
474			/* vdd_dram */
475			BUCK6 {
476				regulator-name = "buck6";
477				regulator-min-microvolt = <800000>;
478				regulator-max-microvolt = <1400000>;
479				regulator-boot-on;
480				regulator-always-on;
481			};
482
483			/* nvcc_snvs_1p8 */
484			LDO1 {
485				regulator-name = "ldo1";
486				regulator-min-microvolt = <1600000>;
487				regulator-max-microvolt = <1900000>;
488				regulator-boot-on;
489				regulator-always-on;
490			};
491
492			/* vdd_snvs_0p8 */
493			LDO2 {
494				regulator-name = "ldo2";
495				regulator-min-microvolt = <800000>;
496				regulator-max-microvolt = <900000>;
497				regulator-boot-on;
498				regulator-always-on;
499			};
500
501			/* vdda_1p8 */
502			LDO3 {
503				regulator-name = "ldo3";
504				regulator-min-microvolt = <1800000>;
505				regulator-max-microvolt = <3300000>;
506				regulator-boot-on;
507				regulator-always-on;
508			};
509
510			LDO4 {
511				regulator-name = "ldo4";
512				regulator-min-microvolt = <900000>;
513				regulator-max-microvolt = <1800000>;
514				regulator-boot-on;
515				regulator-always-on;
516			};
517
518			LDO6 {
519				regulator-name = "ldo6";
520				regulator-min-microvolt = <900000>;
521				regulator-max-microvolt = <1800000>;
522				regulator-boot-on;
523				regulator-always-on;
524			};
525		};
526	};
527};
528
529&i2c3 {
530	clock-frequency = <400000>;
531	pinctrl-names = "default", "gpio";
532	pinctrl-0 = <&pinctrl_i2c3>;
533	pinctrl-1 = <&pinctrl_i2c3_gpio>;
534	scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
535	sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
536	status = "okay";
537
538	accelerometer@19 {
539		pinctrl-names = "default";
540		pinctrl-0 = <&pinctrl_accel>;
541		compatible = "st,lis2de12";
542		reg = <0x19>;
543		st,drdy-int-pin = <1>;
544		interrupt-parent = <&gpio1>;
545		interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
546	};
547};
548
549&pcie_phy {
550	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
551	fsl,clkreq-unsupported;
552	clocks = <&pcie0_refclk>;
553	clock-names = "ref";
554	status = "okay";
555};
556
557&pcie0 {
558	pinctrl-names = "default";
559	pinctrl-0 = <&pinctrl_pcie0>;
560	reset-gpio = <&gpio5 11 GPIO_ACTIVE_LOW>;
561	clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&pcie0_refclk>,
562		 <&clk IMX8MM_CLK_PCIE1_AUX>;
563	assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>,
564			  <&clk IMX8MM_CLK_PCIE1_CTRL>;
565	assigned-clock-rates = <10000000>, <250000000>;
566	assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>,
567				 <&clk IMX8MM_SYS_PLL2_250M>;
568	status = "okay";
569};
570
571&disp_blk_ctrl {
572	status = "disabled";
573};
574
575&pgc_mipi {
576	status = "disabled";
577};
578
579/* off-board RS232/RS485/RS422 */
580&uart1 {
581	pinctrl-names = "default";
582	pinctrl-0 = <&pinctrl_uart1>;
583	cts-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
584	rts-gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
585	dtr-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
586	dsr-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
587	dcd-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
588	status = "okay";
589};
590
591/* console */
592&uart2 {
593	pinctrl-names = "default";
594	pinctrl-0 = <&pinctrl_uart2>;
595	status = "okay";
596};
597
598&usbotg1 {
599	dr_mode = "host";
600	disable-over-current;
601	status = "okay";
602};
603
604/* microSD */
605&usdhc2 {
606	pinctrl-names = "default", "state_100mhz", "state_200mhz";
607	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
608	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
609	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
610	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
611	bus-width = <4>;
612	vmmc-supply = <&reg_3p3v>;
613	status = "okay";
614};
615
616/* eMMC */
617&usdhc3 {
618	pinctrl-names = "default", "state_100mhz", "state_200mhz";
619	pinctrl-0 = <&pinctrl_usdhc3>;
620	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
621	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
622	bus-width = <8>;
623	non-removable;
624	status = "okay";
625};
626
627&wdog1 {
628	pinctrl-names = "default";
629	pinctrl-0 = <&pinctrl_wdog>;
630	fsl,ext-reset-output;
631	status = "okay";
632};
633
634&iomuxc {
635	pinctrl-names = "default";
636	pinctrl-0 = <&pinctrl_hog>;
637
638	pinctrl_hog: hoggrp {
639		fsl,pins = <
640			MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10	0x40000041 /* RS422# */
641			MX8MM_IOMUXC_GPIO1_IO11_GPIO1_IO11	0x40000041 /* RS485# */
642			MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12	0x40000041 /* RS232# */
643			MX8MM_IOMUXC_SD1_DATA7_GPIO2_IO9	0x40000041 /* DIG1_IN */
644			MX8MM_IOMUXC_SD1_DATA6_GPIO2_IO8	0x40000041 /* DIG1_OUT */
645			MX8MM_IOMUXC_SD1_DATA4_GPIO2_IO6	0x40000041 /* DIG1_CTL */
646			MX8MM_IOMUXC_SD1_DATA0_GPIO2_IO2	0x40000041 /* DIG2_CTL */
647			MX8MM_IOMUXC_SD1_CLK_GPIO2_IO0		0x40000041 /* DIG2_IN */
648			MX8MM_IOMUXC_SD1_CMD_GPIO2_IO1		0x40000041 /* DIG2_OUT */
649			MX8MM_IOMUXC_ECSPI1_MOSI_GPIO5_IO7	0x40000041 /* SIM1DET# */
650			MX8MM_IOMUXC_ECSPI1_MISO_GPIO5_IO8	0x40000041 /* SIM2DET# */
651			MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9	0x40000041 /* SIM2SEL */
652			MX8MM_IOMUXC_ECSPI2_MISO_GPIO5_IO12	0x40000041 /* PCI_WDIS# */
653		>;
654	};
655
656	pinctrl_accel: accelgrp {
657		fsl,pins = <
658			MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15	0x159
659		>;
660	};
661
662	pinctrl_fec1: fec1grp {
663		fsl,pins = <
664			MX8MM_IOMUXC_ENET_MDC_ENET1_MDC			0x3
665			MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO		0x3
666			MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3		0x1f
667			MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2		0x1f
668			MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1		0x1f
669			MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0		0x1f
670			MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3		0x91
671			MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2		0x91
672			MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1		0x91
673			MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0		0x91
674			MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC		0x1f
675			MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC		0x91
676			MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
677			MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
678			MX8MM_IOMUXC_SAI2_TXFS_GPIO4_IO24		0x19 /* IRQ# */
679			MX8MM_IOMUXC_SAI2_TXC_GPIO4_IO25		0x19 /* RST# */
680		>;
681	};
682
683	pinctrl_gsc: gscgrp {
684		fsl,pins = <
685			MX8MM_IOMUXC_SAI2_TXD0_GPIO4_IO26	0x159
686		>;
687	};
688
689	pinctrl_i2c1: i2c1grp {
690		fsl,pins = <
691			MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL		0x400001c3
692			MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA		0x400001c3
693		>;
694	};
695
696	pinctrl_i2c1_gpio: i2c1gpiogrp {
697		fsl,pins = <
698			MX8MM_IOMUXC_I2C1_SCL_GPIO5_IO14	0x400001c3
699			MX8MM_IOMUXC_I2C1_SDA_GPIO5_IO15	0x400001c3
700		>;
701	};
702
703	pinctrl_i2c2: i2c2grp {
704		fsl,pins = <
705			MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL		0x400001c3
706			MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA		0x400001c3
707		>;
708	};
709
710	pinctrl_i2c2_gpio: i2c2gpiogrp {
711		fsl,pins = <
712			MX8MM_IOMUXC_I2C2_SCL_GPIO5_IO16	0x400001c3
713			MX8MM_IOMUXC_I2C2_SDA_GPIO5_IO17	0x400001c3
714		>;
715	};
716
717	pinctrl_i2c3: i2c3grp {
718		fsl,pins = <
719			MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL		0x400001c3
720			MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA		0x400001c3
721		>;
722	};
723
724	pinctrl_i2c3_gpio: i2c3gpiogrp {
725		fsl,pins = <
726			MX8MM_IOMUXC_I2C3_SCL_GPIO5_IO18	0x400001c3
727			MX8MM_IOMUXC_I2C3_SDA_GPIO5_IO19	0x400001c3
728		>;
729	};
730
731	pinctrl_gpio_leds: gpioledgrp {
732		fsl,pins = <
733			MX8MM_IOMUXC_SPDIF_EXT_CLK_GPIO5_IO5	0x19
734			MX8MM_IOMUXC_SAI3_RXD_GPIO4_IO30	0x19
735			MX8MM_IOMUXC_SAI3_MCLK_GPIO5_IO2	0x19
736			MX8MM_IOMUXC_GPIO1_IO14_GPIO1_IO14	0x19
737			MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9	0x19
738			MX8MM_IOMUXC_SPDIF_TX_GPIO5_IO3		0x19
739			MX8MM_IOMUXC_SAI3_RXC_GPIO4_IO29	0x19
740			MX8MM_IOMUXC_SAI3_RXFS_GPIO4_IO28	0x19
741			MX8MM_IOMUXC_GPIO1_IO13_GPIO1_IO13	0x19
742			MX8MM_IOMUXC_SAI3_TXFS_GPIO4_IO31	0x19
743			MX8MM_IOMUXC_SPDIF_RX_GPIO5_IO4		0x19
744			MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8	0x19
745		>;
746	};
747
748	pinctrl_pcie0: pciegrp {
749		fsl,pins = <
750			MX8MM_IOMUXC_ECSPI2_MOSI_GPIO5_IO11	0x41
751		>;
752	};
753
754	pinctrl_pmic: pmicgrp {
755		fsl,pins = <
756			MX8MM_IOMUXC_NAND_DATA02_GPIO3_IO8	0x41
757		>;
758	};
759
760	pinctrl_uart1: uart1grp {
761		fsl,pins = <
762			MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX	0x140
763			MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX	0x140
764			MX8MM_IOMUXC_GPIO1_IO00_GPIO1_IO0	0x140
765			MX8MM_IOMUXC_GPIO1_IO01_GPIO1_IO1	0x140
766			MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3	0x140
767			MX8MM_IOMUXC_GPIO1_IO05_GPIO1_IO5	0x140
768			MX8MM_IOMUXC_SAI5_RXD3_GPIO3_IO24	0x140
769		>;
770	};
771
772	pinctrl_uart2: uart2grp {
773		fsl,pins = <
774			MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX	0x140
775			MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX	0x140
776		>;
777	};
778
779	pinctrl_usdhc2: usdhc2grp {
780		fsl,pins = <
781			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x190
782			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d0
783			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d0
784			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d0
785			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d0
786			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d0
787		>;
788	};
789
790	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
791		fsl,pins = <
792			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x194
793			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d4
794			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d4
795			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d4
796			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d4
797			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d4
798		>;
799	};
800
801	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
802		fsl,pins = <
803			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x196
804			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d6
805			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d6
806			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d6
807			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d6
808			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d6
809		>;
810	};
811
812	pinctrl_usdhc2_gpio: usdhc2-gpiogrp {
813		fsl,pins = <
814			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12	0x1c4
815			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT  0x1d0
816		>;
817	};
818
819	pinctrl_usdhc3: usdhc3grp {
820		fsl,pins = <
821			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK	0x190
822			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD	0x1d0
823			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0	0x1d0
824			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1	0x1d0
825			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2	0x1d0
826			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3	0x1d0
827			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4	0x1d0
828			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5	0x1d0
829			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6	0x1d0
830			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7	0x1d0
831			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE	0x190
832		>;
833	};
834
835	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
836		fsl,pins = <
837			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK	0x194
838			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD	0x1d4
839			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0	0x1d4
840			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1	0x1d4
841			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2	0x1d4
842			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3	0x1d4
843			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4	0x1d4
844			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5	0x1d4
845			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6	0x1d4
846			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7	0x1d4
847			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE	0x194
848		>;
849	};
850
851	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
852		fsl,pins = <
853			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK	0x196
854			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD	0x1d6
855			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0	0x1d6
856			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1	0x1d6
857			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2	0x1d6
858			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3	0x1d6
859			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4	0x1d6
860			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5	0x1d6
861			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6	0x1d6
862			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7	0x1d6
863			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE	0x196
864		>;
865	};
866
867	pinctrl_wdog: wdoggrp {
868		fsl,pins = <
869			MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B	0xc6
870		>;
871	};
872};
873