xref: /linux/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dts (revision a3a02a52bcfcbcc4a637d4b68bf1bc391c9fad02)
1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2/*
3 * Copyright 2022 Gateworks Corporation
4 */
5
6/dts-v1/;
7
8#include <dt-bindings/gpio/gpio.h>
9#include <dt-bindings/input/linux-event-codes.h>
10#include <dt-bindings/leds/common.h>
11#include <dt-bindings/phy/phy-imx8-pcie.h>
12
13#include "imx8mm.dtsi"
14
15/ {
16	model = "Gateworks Venice GW7903 i.MX8MM board";
17	compatible = "gw,imx8mm-gw7903", "fsl,imx8mm";
18
19	aliases {
20		ethernet0 = &fec1;
21		usb0 = &usbotg1;
22	};
23
24	chosen {
25		stdout-path = &uart2;
26	};
27
28	memory@40000000 {
29		device_type = "memory";
30		reg = <0x0 0x40000000 0 0x80000000>;
31	};
32
33	gpio-keys {
34		compatible = "gpio-keys";
35
36		key-user-pb {
37			label = "user_pb";
38			gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
39			linux,code = <BTN_0>;
40		};
41
42		key-user-pb1x {
43			label = "user_pb1x";
44			linux,code = <BTN_1>;
45			interrupt-parent = <&gsc>;
46			interrupts = <0>;
47		};
48
49		key-erased {
50			label = "key_erased";
51			linux,code = <BTN_2>;
52			interrupt-parent = <&gsc>;
53			interrupts = <1>;
54		};
55
56		key-eeprom-wp {
57			label = "eeprom_wp";
58			linux,code = <BTN_3>;
59			interrupt-parent = <&gsc>;
60			interrupts = <2>;
61		};
62
63		switch-hold {
64			label = "switch_hold";
65			linux,code = <BTN_5>;
66			interrupt-parent = <&gsc>;
67			interrupts = <7>;
68		};
69	};
70
71	led-controller {
72		compatible = "gpio-leds";
73		pinctrl-names = "default";
74		pinctrl-0 = <&pinctrl_gpio_leds>;
75
76		led-0 {
77			function = LED_FUNCTION_STATUS;
78			color = <LED_COLOR_ID_RED>;
79			label = "led01_red";
80			gpios = <&gpio5 5 GPIO_ACTIVE_HIGH>;
81			default-state = "off";
82		};
83
84		led-1 {
85			function = LED_FUNCTION_STATUS;
86			color = <LED_COLOR_ID_GREEN>;
87			label = "led01_grn";
88			gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>;
89			default-state = "off";
90		};
91
92		led-2 {
93			function = LED_FUNCTION_STATUS;
94			color = <LED_COLOR_ID_RED>;
95			label = "led02_red";
96			gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;
97			default-state = "off";
98		};
99
100		led-3 {
101			function = LED_FUNCTION_STATUS;
102			color = <LED_COLOR_ID_GREEN>;
103			label = "led02_grn";
104			gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
105			default-state = "off";
106		};
107
108		led-4 {
109			function = LED_FUNCTION_STATUS;
110			color = <LED_COLOR_ID_RED>;
111			label = "led03_red";
112			gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
113			default-state = "off";
114		};
115
116		led-5 {
117			function = LED_FUNCTION_STATUS;
118			color = <LED_COLOR_ID_GREEN>;
119			label = "led03_grn";
120			gpios = <&gpio5 3 GPIO_ACTIVE_HIGH>;
121			default-state = "off";
122		};
123
124		led-6 {
125			function = LED_FUNCTION_STATUS;
126			color = <LED_COLOR_ID_RED>;
127			label = "led04_red";
128			gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>;
129			default-state = "off";
130		};
131
132		led-7 {
133			function = LED_FUNCTION_STATUS;
134			color = <LED_COLOR_ID_GREEN>;
135			label = "led04_grn";
136			gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>;
137			default-state = "off";
138		};
139
140		led-8 {
141			function = LED_FUNCTION_STATUS;
142			color = <LED_COLOR_ID_RED>;
143			label = "led05_red";
144			gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
145			default-state = "off";
146		};
147
148		led-9 {
149			function = LED_FUNCTION_STATUS;
150			color = <LED_COLOR_ID_GREEN>;
151			label = "led05_grn";
152			gpios = <&gpio4 31 GPIO_ACTIVE_HIGH>;
153			default-state = "off";
154		};
155
156		led-a {
157			function = LED_FUNCTION_STATUS;
158			color = <LED_COLOR_ID_RED>;
159			label = "led06_red";
160			gpios = <&gpio5 4 GPIO_ACTIVE_HIGH>;
161			default-state = "off";
162		};
163
164		led-b {
165			function = LED_FUNCTION_STATUS;
166			color = <LED_COLOR_ID_GREEN>;
167			label = "led06_grn";
168			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
169			default-state = "off";
170		};
171	};
172
173	pcie0_refclk: pcie0-refclk {
174		compatible = "fixed-clock";
175		#clock-cells = <0>;
176		clock-frequency = <100000000>;
177	};
178
179	reg_3p3v: regulator-3p3v {
180		compatible = "regulator-fixed";
181		regulator-name = "3P3V";
182		regulator-min-microvolt = <3300000>;
183		regulator-max-microvolt = <3300000>;
184		regulator-always-on;
185	};
186};
187
188&A53_0 {
189	cpu-supply = <&buck2>;
190};
191
192&A53_1 {
193	cpu-supply = <&buck2>;
194};
195
196&A53_2 {
197	cpu-supply = <&buck2>;
198};
199
200&A53_3 {
201	cpu-supply = <&buck2>;
202};
203
204&ddrc {
205	operating-points-v2 = <&ddrc_opp_table>;
206
207	ddrc_opp_table: opp-table {
208		compatible = "operating-points-v2";
209
210		opp-25000000 {
211			opp-hz = /bits/ 64 <25000000>;
212		};
213
214		opp-100000000 {
215			opp-hz = /bits/ 64 <100000000>;
216		};
217
218		opp-750000000 {
219			opp-hz = /bits/ 64 <750000000>;
220		};
221	};
222};
223
224&fec1 {
225	pinctrl-names = "default";
226	pinctrl-0 = <&pinctrl_fec1>;
227	phy-mode = "rgmii-id";
228	phy-handle = <&ethphy0>;
229	local-mac-address = [00 00 00 00 00 00];
230	status = "okay";
231
232	mdio {
233		#address-cells = <1>;
234		#size-cells = <0>;
235
236		ethphy0: ethernet-phy@0 {
237			compatible = "ethernet-phy-ieee802.3-c22";
238			reg = <0>;
239			rx-internal-delay-ps = <2000>;
240			tx-internal-delay-ps = <2500>;
241		};
242	};
243};
244
245&gpio1 {
246	gpio-line-names = "", "", "", "", "", "", "", "",
247		"", "", "rs422_en#", "rs485_en#", "rs232_en#", "", "", "",
248		"", "", "", "", "", "", "", "",
249		"", "", "", "", "", "", "", "";
250};
251
252&gpio2 {
253	gpio-line-names = "dig2_in", "dig2_out#", "dig2_ctl", "", "", "", "dig1_ctl", "",
254		"dig1_out#", "dig1_in", "", "", "", "", "", "",
255		"", "", "", "", "", "", "", "",
256		"", "", "", "", "", "", "", "";
257};
258
259&gpio5 {
260	gpio-line-names = "", "", "", "", "", "", "", "sim1_det#",
261		"sim2_det#", "sim2_sel", "", "", "pci_wdis#", "", "", "",
262		"", "", "", "", "", "", "", "",
263		"", "", "", "", "", "", "", "";
264};
265
266&i2c1 {
267	clock-frequency = <100000>;
268	pinctrl-names = "default", "gpio";
269	pinctrl-0 = <&pinctrl_i2c1>;
270	pinctrl-1 = <&pinctrl_i2c1_gpio>;
271	scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
272	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
273	status = "okay";
274
275	gsc: gsc@20 {
276		compatible = "gw,gsc";
277		reg = <0x20>;
278		pinctrl-0 = <&pinctrl_gsc>;
279		interrupt-parent = <&gpio4>;
280		interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
281		interrupt-controller;
282		#interrupt-cells = <1>;
283
284		adc {
285			compatible = "gw,gsc-adc";
286			#address-cells = <1>;
287			#size-cells = <0>;
288
289			channel@6 {
290				gw,mode = <0>;
291				reg = <0x06>;
292				label = "temp";
293			};
294
295			channel@8 {
296				gw,mode = <3>;
297				reg = <0x08>;
298				label = "vdd_bat";
299			};
300
301			channel@82 {
302				gw,mode = <2>;
303				reg = <0x82>;
304				label = "vin";
305				gw,voltage-divider-ohms = <22100 1000>;
306				gw,voltage-offset-microvolt = <700000>;
307			};
308
309			channel@84 {
310				gw,mode = <2>;
311				reg = <0x84>;
312				label = "vdd_5p0";
313				gw,voltage-divider-ohms = <10000 10000>;
314			};
315
316			channel@86 {
317				gw,mode = <2>;
318				reg = <0x86>;
319				label = "vdd_3p3";
320				gw,voltage-divider-ohms = <10000 10000>;
321			};
322
323			channel@88 {
324				gw,mode = <2>;
325				reg = <0x88>;
326				label = "vdd_0p9";
327			};
328
329			channel@8c {
330				gw,mode = <2>;
331				reg = <0x8c>;
332				label = "vdd_soc";
333			};
334
335			channel@8e {
336				gw,mode = <2>;
337				reg = <0x8e>;
338				label = "vdd_arm";
339			};
340
341			channel@90 {
342				gw,mode = <2>;
343				reg = <0x90>;
344				label = "vdd_1p8";
345			};
346
347			channel@92 {
348				gw,mode = <2>;
349				reg = <0x92>;
350				label = "vdd_dram";
351			};
352
353			channel@a2 {
354				gw,mode = <2>;
355				reg = <0xa2>;
356				label = "vdd_gsc";
357				gw,voltage-divider-ohms = <10000 10000>;
358			};
359		};
360	};
361
362	gpio: gpio@23 {
363		compatible = "nxp,pca9555";
364		reg = <0x23>;
365		gpio-controller;
366		#gpio-cells = <2>;
367		interrupt-parent = <&gsc>;
368		interrupts = <4>;
369	};
370
371	eeprom@50 {
372		compatible = "atmel,24c02";
373		reg = <0x50>;
374		pagesize = <16>;
375	};
376
377	eeprom@51 {
378		compatible = "atmel,24c02";
379		reg = <0x51>;
380		pagesize = <16>;
381	};
382
383	eeprom@52 {
384		compatible = "atmel,24c02";
385		reg = <0x52>;
386		pagesize = <16>;
387	};
388
389	eeprom@53 {
390		compatible = "atmel,24c02";
391		reg = <0x53>;
392		pagesize = <16>;
393	};
394
395	rtc@68 {
396		compatible = "dallas,ds1672";
397		reg = <0x68>;
398	};
399};
400
401&i2c2 {
402	clock-frequency = <400000>;
403	pinctrl-names = "default", "gpio";
404	pinctrl-0 = <&pinctrl_i2c2>;
405	pinctrl-1 = <&pinctrl_i2c2_gpio>;
406	scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
407	sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
408	status = "okay";
409
410	pmic@4b {
411		compatible = "rohm,bd71847";
412		reg = <0x4b>;
413		pinctrl-names = "default";
414		pinctrl-0 = <&pinctrl_pmic>;
415		interrupt-parent = <&gpio3>;
416		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
417		rohm,reset-snvs-powered;
418		#clock-cells = <0>;
419		clocks = <&osc_32k>;
420		clock-output-names = "clk-32k-out";
421
422		regulators {
423			/* vdd_soc: 0.805-0.900V (typ=0.8V) */
424			BUCK1 {
425				regulator-name = "buck1";
426				regulator-min-microvolt = <700000>;
427				regulator-max-microvolt = <1300000>;
428				regulator-boot-on;
429				regulator-always-on;
430				regulator-ramp-delay = <1250>;
431			};
432
433			/* vdd_arm: 0.805-1.0V (typ=0.9V) */
434			buck2: BUCK2 {
435				regulator-name = "buck2";
436				regulator-min-microvolt = <700000>;
437				regulator-max-microvolt = <1300000>;
438				regulator-boot-on;
439				regulator-always-on;
440				regulator-ramp-delay = <1250>;
441				rohm,dvs-run-voltage = <1000000>;
442				rohm,dvs-idle-voltage = <900000>;
443			};
444
445			/* vdd_0p9: 0.805-1.0V (typ=0.9V) */
446			BUCK3 {
447				regulator-name = "buck3";
448				regulator-min-microvolt = <700000>;
449				regulator-max-microvolt = <1350000>;
450				regulator-boot-on;
451				regulator-always-on;
452			};
453
454			/* vdd_3p3 */
455			BUCK4 {
456				regulator-name = "buck4";
457				regulator-min-microvolt = <3000000>;
458				regulator-max-microvolt = <3300000>;
459				regulator-boot-on;
460				regulator-always-on;
461			};
462
463			/* vdd_1p8 */
464			BUCK5 {
465				regulator-name = "buck5";
466				regulator-min-microvolt = <1605000>;
467				regulator-max-microvolt = <1995000>;
468				regulator-boot-on;
469				regulator-always-on;
470			};
471
472			/* vdd_dram */
473			BUCK6 {
474				regulator-name = "buck6";
475				regulator-min-microvolt = <800000>;
476				regulator-max-microvolt = <1400000>;
477				regulator-boot-on;
478				regulator-always-on;
479			};
480
481			/* nvcc_snvs_1p8 */
482			LDO1 {
483				regulator-name = "ldo1";
484				regulator-min-microvolt = <1600000>;
485				regulator-max-microvolt = <1900000>;
486				regulator-boot-on;
487				regulator-always-on;
488			};
489
490			/* vdd_snvs_0p8 */
491			LDO2 {
492				regulator-name = "ldo2";
493				regulator-min-microvolt = <800000>;
494				regulator-max-microvolt = <900000>;
495				regulator-boot-on;
496				regulator-always-on;
497			};
498
499			/* vdda_1p8 */
500			LDO3 {
501				regulator-name = "ldo3";
502				regulator-min-microvolt = <1800000>;
503				regulator-max-microvolt = <3300000>;
504				regulator-boot-on;
505				regulator-always-on;
506			};
507
508			LDO4 {
509				regulator-name = "ldo4";
510				regulator-min-microvolt = <900000>;
511				regulator-max-microvolt = <1800000>;
512				regulator-boot-on;
513				regulator-always-on;
514			};
515
516			LDO6 {
517				regulator-name = "ldo6";
518				regulator-min-microvolt = <900000>;
519				regulator-max-microvolt = <1800000>;
520				regulator-boot-on;
521				regulator-always-on;
522			};
523		};
524	};
525};
526
527&i2c3 {
528	clock-frequency = <400000>;
529	pinctrl-names = "default", "gpio";
530	pinctrl-0 = <&pinctrl_i2c3>;
531	pinctrl-1 = <&pinctrl_i2c3_gpio>;
532	scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
533	sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
534	status = "okay";
535
536	accelerometer@19 {
537		pinctrl-names = "default";
538		pinctrl-0 = <&pinctrl_accel>;
539		compatible = "st,lis2de12";
540		reg = <0x19>;
541		st,drdy-int-pin = <1>;
542		interrupt-parent = <&gpio1>;
543		interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
544	};
545};
546
547&pcie_phy {
548	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
549	fsl,clkreq-unsupported;
550	clocks = <&pcie0_refclk>;
551	clock-names = "ref";
552	status = "okay";
553};
554
555&pcie0 {
556	pinctrl-names = "default";
557	pinctrl-0 = <&pinctrl_pcie0>;
558	reset-gpio = <&gpio5 11 GPIO_ACTIVE_LOW>;
559	clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&pcie0_refclk>,
560		 <&clk IMX8MM_CLK_PCIE1_AUX>;
561	assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>,
562			  <&clk IMX8MM_CLK_PCIE1_CTRL>;
563	assigned-clock-rates = <10000000>, <250000000>;
564	assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>,
565				 <&clk IMX8MM_SYS_PLL2_250M>;
566	status = "okay";
567};
568
569&disp_blk_ctrl {
570	status = "disabled";
571};
572
573&pgc_mipi {
574	status = "disabled";
575};
576
577/* off-board RS232/RS485/RS422 */
578&uart1 {
579	pinctrl-names = "default";
580	pinctrl-0 = <&pinctrl_uart1>;
581	cts-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
582	rts-gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
583	dtr-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
584	dsr-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
585	dcd-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
586	status = "okay";
587};
588
589/* console */
590&uart2 {
591	pinctrl-names = "default";
592	pinctrl-0 = <&pinctrl_uart2>;
593	status = "okay";
594};
595
596&usbotg1 {
597	dr_mode = "host";
598	disable-over-current;
599	status = "okay";
600};
601
602/* microSD */
603&usdhc2 {
604	pinctrl-names = "default", "state_100mhz", "state_200mhz";
605	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
606	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
607	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
608	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
609	bus-width = <4>;
610	vmmc-supply = <&reg_3p3v>;
611	status = "okay";
612};
613
614/* eMMC */
615&usdhc3 {
616	pinctrl-names = "default", "state_100mhz", "state_200mhz";
617	pinctrl-0 = <&pinctrl_usdhc3>;
618	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
619	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
620	bus-width = <8>;
621	non-removable;
622	status = "okay";
623};
624
625&wdog1 {
626	pinctrl-names = "default";
627	pinctrl-0 = <&pinctrl_wdog>;
628	fsl,ext-reset-output;
629	status = "okay";
630};
631
632&iomuxc {
633	pinctrl-names = "default";
634	pinctrl-0 = <&pinctrl_hog>;
635
636	pinctrl_hog: hoggrp {
637		fsl,pins = <
638			MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10	0x40000041 /* RS422# */
639			MX8MM_IOMUXC_GPIO1_IO11_GPIO1_IO11	0x40000041 /* RS485# */
640			MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12	0x40000041 /* RS232# */
641			MX8MM_IOMUXC_SD1_DATA7_GPIO2_IO9	0x40000041 /* DIG1_IN */
642			MX8MM_IOMUXC_SD1_DATA6_GPIO2_IO8	0x40000041 /* DIG1_OUT */
643			MX8MM_IOMUXC_SD1_DATA4_GPIO2_IO6	0x40000041 /* DIG1_CTL */
644			MX8MM_IOMUXC_SD1_DATA0_GPIO2_IO2	0x40000041 /* DIG2_CTL */
645			MX8MM_IOMUXC_SD1_CLK_GPIO2_IO0		0x40000041 /* DIG2_IN */
646			MX8MM_IOMUXC_SD1_CMD_GPIO2_IO1		0x40000041 /* DIG2_OUT */
647			MX8MM_IOMUXC_ECSPI1_MOSI_GPIO5_IO7	0x40000041 /* SIM1DET# */
648			MX8MM_IOMUXC_ECSPI1_MISO_GPIO5_IO8	0x40000041 /* SIM2DET# */
649			MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9	0x40000041 /* SIM2SEL */
650			MX8MM_IOMUXC_ECSPI2_MISO_GPIO5_IO12	0x40000041 /* PCI_WDIS# */
651		>;
652	};
653
654	pinctrl_accel: accelgrp {
655		fsl,pins = <
656			MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15	0x159
657		>;
658	};
659
660	pinctrl_fec1: fec1grp {
661		fsl,pins = <
662			MX8MM_IOMUXC_ENET_MDC_ENET1_MDC			0x3
663			MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO		0x3
664			MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3		0x1f
665			MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2		0x1f
666			MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1		0x1f
667			MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0		0x1f
668			MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3		0x91
669			MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2		0x91
670			MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1		0x91
671			MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0		0x91
672			MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC		0x1f
673			MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC		0x91
674			MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
675			MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
676			MX8MM_IOMUXC_SAI2_TXFS_GPIO4_IO24		0x19 /* IRQ# */
677			MX8MM_IOMUXC_SAI2_TXC_GPIO4_IO25		0x19 /* RST# */
678		>;
679	};
680
681	pinctrl_gsc: gscgrp {
682		fsl,pins = <
683			MX8MM_IOMUXC_SAI2_TXD0_GPIO4_IO26	0x159
684		>;
685	};
686
687	pinctrl_i2c1: i2c1grp {
688		fsl,pins = <
689			MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL		0x400001c3
690			MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA		0x400001c3
691		>;
692	};
693
694	pinctrl_i2c1_gpio: i2c1gpiogrp {
695		fsl,pins = <
696			MX8MM_IOMUXC_I2C1_SCL_GPIO5_IO14	0x400001c3
697			MX8MM_IOMUXC_I2C1_SDA_GPIO5_IO15	0x400001c3
698		>;
699	};
700
701	pinctrl_i2c2: i2c2grp {
702		fsl,pins = <
703			MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL		0x400001c3
704			MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA		0x400001c3
705		>;
706	};
707
708	pinctrl_i2c2_gpio: i2c2gpiogrp {
709		fsl,pins = <
710			MX8MM_IOMUXC_I2C2_SCL_GPIO5_IO16	0x400001c3
711			MX8MM_IOMUXC_I2C2_SDA_GPIO5_IO17	0x400001c3
712		>;
713	};
714
715	pinctrl_i2c3: i2c3grp {
716		fsl,pins = <
717			MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL		0x400001c3
718			MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA		0x400001c3
719		>;
720	};
721
722	pinctrl_i2c3_gpio: i2c3gpiogrp {
723		fsl,pins = <
724			MX8MM_IOMUXC_I2C3_SCL_GPIO5_IO18	0x400001c3
725			MX8MM_IOMUXC_I2C3_SDA_GPIO5_IO19	0x400001c3
726		>;
727	};
728
729	pinctrl_gpio_leds: gpioledgrp {
730		fsl,pins = <
731			MX8MM_IOMUXC_SPDIF_EXT_CLK_GPIO5_IO5	0x19
732			MX8MM_IOMUXC_SAI3_RXD_GPIO4_IO30	0x19
733			MX8MM_IOMUXC_SAI3_MCLK_GPIO5_IO2	0x19
734			MX8MM_IOMUXC_GPIO1_IO14_GPIO1_IO14	0x19
735			MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9	0x19
736			MX8MM_IOMUXC_SPDIF_TX_GPIO5_IO3		0x19
737			MX8MM_IOMUXC_SAI3_RXC_GPIO4_IO29	0x19
738			MX8MM_IOMUXC_SAI3_RXFS_GPIO4_IO28	0x19
739			MX8MM_IOMUXC_GPIO1_IO13_GPIO1_IO13	0x19
740			MX8MM_IOMUXC_SAI3_TXFS_GPIO4_IO31	0x19
741			MX8MM_IOMUXC_SPDIF_RX_GPIO5_IO4		0x19
742			MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8	0x19
743		>;
744	};
745
746	pinctrl_pcie0: pciegrp {
747		fsl,pins = <
748			MX8MM_IOMUXC_ECSPI2_MOSI_GPIO5_IO11	0x41
749		>;
750	};
751
752	pinctrl_pmic: pmicgrp {
753		fsl,pins = <
754			MX8MM_IOMUXC_NAND_DATA02_GPIO3_IO8	0x41
755		>;
756	};
757
758	pinctrl_uart1: uart1grp {
759		fsl,pins = <
760			MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX	0x140
761			MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX	0x140
762			MX8MM_IOMUXC_GPIO1_IO00_GPIO1_IO0	0x140
763			MX8MM_IOMUXC_GPIO1_IO01_GPIO1_IO1	0x140
764			MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3	0x140
765			MX8MM_IOMUXC_GPIO1_IO05_GPIO1_IO5	0x140
766			MX8MM_IOMUXC_SAI5_RXD3_GPIO3_IO24	0x140
767		>;
768	};
769
770	pinctrl_uart2: uart2grp {
771		fsl,pins = <
772			MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX	0x140
773			MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX	0x140
774		>;
775	};
776
777	pinctrl_usdhc2: usdhc2grp {
778		fsl,pins = <
779			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x190
780			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d0
781			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d0
782			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d0
783			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d0
784			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d0
785		>;
786	};
787
788	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
789		fsl,pins = <
790			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x194
791			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d4
792			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d4
793			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d4
794			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d4
795			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d4
796		>;
797	};
798
799	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
800		fsl,pins = <
801			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x196
802			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d6
803			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d6
804			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d6
805			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d6
806			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d6
807		>;
808	};
809
810	pinctrl_usdhc2_gpio: usdhc2-gpiogrp {
811		fsl,pins = <
812			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12	0x1c4
813			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT  0x1d0
814		>;
815	};
816
817	pinctrl_usdhc3: usdhc3grp {
818		fsl,pins = <
819			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK	0x190
820			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD	0x1d0
821			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0	0x1d0
822			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1	0x1d0
823			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2	0x1d0
824			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3	0x1d0
825			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4	0x1d0
826			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5	0x1d0
827			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6	0x1d0
828			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7	0x1d0
829			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE	0x190
830		>;
831	};
832
833	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
834		fsl,pins = <
835			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK	0x194
836			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD	0x1d4
837			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0	0x1d4
838			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1	0x1d4
839			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2	0x1d4
840			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3	0x1d4
841			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4	0x1d4
842			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5	0x1d4
843			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6	0x1d4
844			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7	0x1d4
845			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE	0x194
846		>;
847	};
848
849	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
850		fsl,pins = <
851			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK	0x196
852			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD	0x1d6
853			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0	0x1d6
854			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1	0x1d6
855			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2	0x1d6
856			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3	0x1d6
857			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4	0x1d6
858			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5	0x1d6
859			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6	0x1d6
860			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7	0x1d6
861			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE	0x196
862		>;
863	};
864
865	pinctrl_wdog: wdoggrp {
866		fsl,pins = <
867			MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B	0xc6
868		>;
869	};
870};
871